aboutsummaryrefslogtreecommitdiffstats
path: root/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-masq-mrr.robot
diff options
context:
space:
mode:
Diffstat (limited to 'tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-masq-mrr.robot')
-rw-r--r--tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-masq-mrr.robot266
1 files changed, 266 insertions, 0 deletions
diff --git a/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-masq-mrr.robot b/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-masq-mrr.robot
new file mode 100644
index 0000000000..41b3c31647
--- /dev/null
+++ b/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-masq-mrr.robot
@@ -0,0 +1,266 @@
+# Copyright (c) 2018 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/performance/performance_setup.robot
+| ...
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR
+| ... | NIC_Intel-X520-DA2 | SRv6 | IP6FWD | FEATURE | SRv6_PROXY
+| ... | SRv6_PROXY_MASQ | MEMIF | LXC
+| ...
+| Suite Setup | Run Keywords
+| ... | Set up 3-node performance topology with DUT's NIC model | L3
+| ... | Intel-X520-DA2
+| ... | AND | Set up performance test suite with MEMIF
+| ... | AND | Set up performance test suite with Masquerading SRv6 proxy
+| ... | AND | Set up performance topology with containers
+| ...
+| Suite Teardown | Tear down 3-node performance topology with container
+| ...
+| Test Setup | Set up performance test
+| ...
+| Test Teardown | Tear down mrr test with SRv6 with encapsulation
+| ...
+| Documentation | *Raw results for Segment routing over IPv6 dataplane with\
+| ... | Masquerading SRv6 proxy test cases*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-SRH-IPv6 on DUT1-DUT2, DUTn-LXC\
+| ... | and DUTn->TG, Eth-IPv6 on TG->DUTn for IPv6 routing over SRv6.
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\
+| ... | routing and static route, SR policy and steering policy for one\
+| ... | direction and one SR behaviour (function) - End.AM - for other\
+| ... | direction. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic\
+| ... | by Intel.
+| ... | *[Ver] TG verification:* In MaxReceivedRate tests TG sends traffic\
+| ... | at line rate and reports total received/sent packets over trial period.\
+| ... | Test packets are generated by TG on\
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
+| ... | (flow-group per direction, 253 flows per flow-group) with\
+| ... | all packets containing Ethernet header,IPv6 header with static payload.\
+| ... | MAC addresses are matching MAC addresses of the TG node interfaces.
+| ... | *[Ref] Applicable standard specifications:* SRv6 Network Programming -\
+| ... | draft 3 and Segment Routing for Service Chaining - internet draft 01.
+
+*** Variables ***
+# X520-DA2 bandwidth limit
+| ${s_limit}= | ${10000000000}
+# SIDs
+| ${dut1_sid1}= | 2002:1::
+| ${dut1_sid2}= | 2003:2::
+| ${dut1_bsid}= | 2002:1::1
+| ${dut2_sid1}= | 2002:2::
+| ${dut2_sid2}= | 2003:1::
+| ${dut2_bsid}= | 2003:1::1
+| ${out_sid1_1}= | 2002:3::
+| ${out_sid1_2}= | 2002:4::
+| ${out_sid2_1}= | 2003:3::
+| ${out_sid2_2}= | 2003:4::
+| ${sid_prefix}= | ${64}
+# IP settings
+| ${tg_if1_ip6_subnet}= | 2001:1::
+| ${tg_if2_ip6_subnet}= | 2001:2::
+| ${dut1_if1_ip6}= | 2001:1::1
+| ${dut1_if2_ip6}= | 2001:3::1
+| ${dut1-memif-1-if1_ip6}= | 3001:1::1
+| ${dut1-memif-1-if2_ip6}= | 3001:1::2
+| ${dut1_nh}= | 4002::
+| ${dut2_if1_ip6}= | 2001:3::2
+| ${dut2_if2_ip6}= | 2001:2::1
+| ${dut2-memif-1-if1_ip6}= | 3002:1::1
+| ${dut2-memif-1-if2_ip6}= | 3002:1::2
+| ${dut2_nh}= | 4001::
+| ${prefix}= | ${64}
+# outer IPv6 header + SRH with 3 SIDs: 40+(8+3*16)B
+| ${srv6_overhead_3sids}= | ${96}
+# Traffic profile:
+| ${traffic_profile}= | trex-sl-3n-ethip6-ip6src253
+# LXC container
+| ${container_count}= | ${1}
+| ${container_engine}= | LXC
+| ${container_image}= | ${EMPTY}
+| ${container_install_dkms}= | ${FALSE}
+# CPU settings
+| ${system_cpus}= | ${1}
+| ${vpp_cpus}= | ${5}
+| ${container_cpus}= | ${5}
+
+*** Keywords ***
+| Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via masquerading proxy behaviour
+| | ...
+| | [Arguments] | ${wt} | ${rxq} | ${framesize}
+| | ...
+| | # Test Variables required for test teardown
+| | Set Test Variable | ${framesize}
+| | Set Test Variable | ${rxq}
+| | ${get_framesize}= | Get Frame Size | ${framesize}
+| | ${max_rate}= | Calculate pps | ${s_limit}
+| | ... | ${get_framesize} + ${srv6_overhead_3sids}
+| | ...
+| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Run Keyword If | ${get_framesize} + ${srv6_overhead_3sids} < ${1522}
+| | ... | Add no multi seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize IPv6 forwarding over SRv6 with endpoint to SR-unaware Service Function via 'masquerading' behaviour in 3-node circular topology
+| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
+
+*** Test Cases ***
+| tc01-78B-1t1c-ethip6srhip6-ip6base-srv6proxy-masq-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with masquerading SRv6 proxy\
+| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 78B | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via masquerading proxy behaviour
+| | wt=1 | rxq=1 | framesize=${78}
+
+| tc02-1518B-1t1c-ethip6srhip6-ip6base-srv6proxy-masq-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with masquerading SRv6 proxy\
+| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 1518B | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via masquerading proxy behaviour
+| | wt=1 | rxq=1 | framesize=${1518}
+
+| tc03-9000B-1t1c-ethip6srhip6-ip6base-srv6proxy-masq-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with masquerading SRv6 proxy\
+| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 9000B | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via masquerading proxy behaviour
+| | wt=1 | rxq=1 | framesize=${9000}
+
+| tc04-IMIX-1t1c-ethip6srhip6-ip6base-srv6proxy-masq-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with masquerading SRv6 proxy\
+| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\
+| | ... | throughput test.
+| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
+| | ...
+| | [Tags] | IMIX | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via masquerading proxy behaviour
+| | wt=1 | rxq=1 | framesize=IMIX_v4_1
+
+| tc05-78B-2t2c-ethip6srhip6-ip6base-srv6proxy-masq-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with masquerading SRv6 proxy\
+| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 78B | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via masquerading proxy behaviour
+| | wt=2 | rxq=1 | framesize=${78}
+
+| tc06-1518B-2t2c-ethip6srhip6-ip6base-srv6proxy-masq-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with masquerading SRv6 proxy\
+| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 1518B | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via masquerading proxy behaviour
+| | wt=2 | rxq=1 | framesize=${1518}
+
+| tc07-9000B-2t2c-ethip6srhip6-ip6base-srv6proxy-masq-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with masquerading SRv6 proxy\
+| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 9000B | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via masquerading proxy behaviour
+| | wt=2 | rxq=1 | framesize=${9000}
+
+| tc08-IMIX-2t2c-ethip6srhip6-ip6base-srv6proxy-masq-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with masquerading SRv6 proxy\
+| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\
+| | ... | throughput test.
+| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
+| | ...
+| | [Tags] | IMIX | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via masquerading proxy behaviour
+| | wt=2 | rxq=1 | framesize=IMIX_v4_1
+
+| tc09-78B-4t4c-ethip6srhip6-ip6base-srv6proxy-masq-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with masquerading SRv6 proxy\
+| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 78B | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via masquerading proxy behaviour
+| | wt=4 | rxq=2 | framesize=${78}
+
+| tc10-1518B-4t4c-ethip6srhip6-ip6base-srv6proxy-masq-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with masquerading SRv6 proxy\
+| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 1518B | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via masquerading proxy behaviour
+| | wt=4 | rxq=2 | framesize=${1518}
+
+| tc11-9000B-4t4c-ethip6srhip6-ip6base-srv6proxy-masq-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with masquerading SRv6 proxy\
+| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 9000B | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via masquerading proxy behaviour
+| | wt=4 | rxq=2 | framesize=${9000}
+
+| tc12-IMIX-4t4c-ethip6srhip6-ip6base-srv6proxy-masq-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with masquerading SRv6 proxy\
+| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\
+| | ... | throughput test.
+| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
+| | ...
+| | [Tags] | IMIX | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via masquerading proxy behaviour
+| | wt=4 | rxq=2 | framesize=IMIX_v4_1