diff options
Diffstat (limited to 'tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-dyn-ndrpdr.robot')
| -rw-r--r-- | tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-dyn-ndrpdr.robot | 171 |
1 files changed, 171 insertions, 0 deletions
diff --git a/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-dyn-ndrpdr.robot b/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-dyn-ndrpdr.robot new file mode 100644 index 0000000000..d05e271d64 --- /dev/null +++ b/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-dyn-ndrpdr.robot @@ -0,0 +1,171 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X710 | SRv6 | IP6FWD | FEATURE | SRv6_PROXY +| ... | SRv6_PROXY_DYN | MEMIF | LXC +| ... +| Suite Setup | Run Keywords +| ... | Set up 3-node performance topology with DUT's NIC model | L3 +| ... | ${nic_name} +| ... | AND | Set up performance test suite with MEMIF +| ... | AND | Set up performance test suite with Dynamic SRv6 proxy +| Suite Teardown | Tear down 3-node performance topology +| ... +| Test Setup | Set up performance test +| Test Teardown | Run Keywords +| ... | Tear down performance test with SRv6 with encapsulation +| ... | AND | Tear down performance test with container +| ... +| Test Template | Local Template +| ... +| Documentation | *Packet throughput Segment routing over IPv6 dataplane with\ +| ... | Dynamic SRv6 proxy test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-SRH-IPv6 on DUT1-DUT2 and\ +| ... | DUTn->TG, Eth-IPv6 on TG->DUTn and DUTn-LXC for IPv6 routing over SRv6. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\ +| ... | routing and static route, SR policy and steering policy for one\ +| ... | direction and one SR behaviour (function) - End.AD - for other\ +| ... | direction. DUT1 and DUT2 are tested with ${nic_name}.\ +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on\ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ +| ... | (flow-group per direction, 253 flows per flow-group) with\ +| ... | all packets containing Ethernet header,IPv6 header with static payload.\ +| ... | MAC addresses are matching MAC addresses of the TG node interfaces. +| ... | *[Ref] Applicable standard specifications:* SRv6 Network Programming -\ +| ... | draft 3 and Segment Routing for Service Chaining - internet draft 01. + +*** Variables *** +| ${nic_name}= | Intel-X710 +# outer IPv6 header + SRH with 3 SIDs: 40+(8+3*16)B +| ${overhead}= | ${96} +# SIDs +| ${dut1_sid1}= | 2002:1:: +| ${dut1_sid2}= | 2003:2:: +| ${dut1_bsid}= | 2002:1::1 +| ${dut2_sid1}= | 2002:2:: +| ${dut2_sid1}= | 2002:2:: +| ${dut2_sid2}= | 2003:1:: +| ${dut2_bsid}= | 2003:1::1 +| ${out_sid1_1}= | 2002:3:: +| ${out_sid1_2}= | 2002:4:: +| ${out_sid2_1}= | 2003:3:: +| ${out_sid2_2}= | 2003:4:: +| ${sid_prefix}= | ${64} +# IP settings +| ${tg_if1_ip6_subnet}= | 2001:1:: +| ${tg_if2_ip6_subnet}= | 2001:2:: +| ${dst_addr_nr}= | ${1} +| ${dut1_if1_ip6}= | 2001:1::1 +| ${dut1_if2_ip6}= | 2001:3::1 +| ${dut1-memif-1-if1_ip6}= | 3001:1::1 +| ${dut1-memif-1-if2_ip6}= | 3001:1::2 +| ${dut1_nh}= | 4002:: +| ${dut2_if1_ip6}= | 2001:3::2 +| ${dut2_if2_ip6}= | 2001:2::1 +| ${dut2-memif-1-if1_ip6}= | 3002:1::1 +| ${dut2-memif-1-if2_ip6}= | 3002:1::2 +| ${dut2_nh}= | 4001:: +| ${prefix}= | ${64} +# Traffic profile: +| ${traffic_profile}= | trex-sl-3n-ethip6-ip6src253 +# Container +| ${container_engine}= | LXC +| ${container_chain_topology}= | chain + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT1 and DUT2 are configured with IPv6\ +| | ... | routing and static route, SR policy and steering policy for one\ +| | ... | direction and one SR behaviour (function) - End - for other direction. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Apply startup configuration on all VPP DUTs +| | And Set up performance test with containers | nf_chains=${1} | nf_nodes=${1} +| | When Initialize IPv6 forwarding over SRv6 with endpoint to SR-unaware Service Function via 'dynamic_proxy' behaviour in 3-node circular topology +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| tc01-78B-1c-ethip6srhip6-ip6base-srv6proxy-dyn-ndrpdr +| | [Tags] | 78B | 1C +| | frame_size=${78} | phy_cores=${1} + +| tc02-78B-2c-ethip6srhip6-ip6base-srv6proxy-dyn-ndrpdr +| | [Tags] | 78B | 2C +| | frame_size=${78} | phy_cores=${2} + +| tc03-78B-4c-ethip6srhip6-ip6base-srv6proxy-dyn-ndrpdr +| | [Tags] | 78B | 4C +| | frame_size=${78} | phy_cores=${4} + +| tc04-1518B-1c-ethip6srhip6-ip6base-srv6proxy-dyn-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| tc05-1518B-2c-ethip6srhip6-ip6base-srv6proxy-dyn-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| tc06-1518B-4c-ethip6srhip6-ip6base-srv6proxy-dyn-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| tc07-9000B-1c-ethip6srhip6-ip6base-srv6proxy-dyn-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| tc08-9000B-2c-ethip6srhip6-ip6base-srv6proxy-dyn-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| tc09-9000B-4c-ethip6srhip6-ip6base-srv6proxy-dyn-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-ethip6srhip6-ip6base-srv6proxy-dyn-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-ethip6srhip6-ip6base-srv6proxy-dyn-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-ethip6srhip6-ip6base-srv6proxy-dyn-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} |