diff options
Diffstat (limited to 'tests/vpp/perf/srv6')
13 files changed, 157 insertions, 1156 deletions
diff --git a/tests/vpp/perf/srv6/10ge2p1x520-ethip6ip6-ip6base-srv6enc1sid-mrr.robot b/tests/vpp/perf/srv6/10ge2p1x520-ethip6ip6-ip6base-srv6enc1sid-mrr.robot deleted file mode 100644 index 689ff32e51..0000000000 --- a/tests/vpp/perf/srv6/10ge2p1x520-ethip6ip6-ip6base-srv6enc1sid-mrr.robot +++ /dev/null @@ -1,148 +0,0 @@ -# Copyright (c) 2018 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR -| ... | NIC_Intel-X520-DA2 | ETH | IP6FWD | FEATURE | SRv6 -| ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L3 | Intel-X520-DA2 -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Tear down mrr test with SRv6 with encapsulation -| ... -| Test Template | Local template -| ... -| Documentation | *Raw results for Segment routing over IPv6 dataplane with\ -| ... | one SID (SRH not inserted) test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-IPv6 on DUT1-DUT2, Eth-IPv6 on\ -| ... | TG-DUTn for IPv6 routing over SRv6. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\ -| ... | routing and static route, SR policy and steering policy for one\ -| ... | direction and one SR behaviour (function) - End - for other direction.\ -| ... | DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel. -| ... | *[Ver] TG verification:* In MaxReceivedRate tests TG sends traffic\ -| ... | at line rate and reports total received/sent packets over trial period.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, 253 flows per flow-group) with\ -| ... | all packets containing Ethernet header,IPv6 header with static payload.\ -| ... | MAC addresses are matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* SRv6 Network Programming -\ -| ... | draft 3. - -*** Variables *** -# X520-DA2 bandwidth limit -| ${s_limit}= | ${10000000000} -# SIDs -| ${dut1_sid1}= | 2002:1:: -| ${dut1_sid2}= | 2003:2:: -| ${dut1_bsid}= | 2002:1::1 -| ${dut2_sid1}= | 2002:2:: -| ${dut2_sid2}= | 2003:1:: -| ${dut2_bsid}= | 2002:2::1 -| ${sid_prefix}= | ${64} -# IP settings -| ${tg_if1_ip6_subnet}= | 2001:1:: -| ${tg_if2_ip6_subnet}= | 2001:2:: -| ${dst_addr_nr}= | ${1} -| ${dut1_if1_ip6}= | 2001:1::1 -| ${dut1_if2_ip6}= | 2001:3::1 -| ${dut2_if1_ip6}= | 2001:3::2 -| ${dut2_if2_ip6}= | 2001:2::1 -| ${prefix}= | ${64} -# outer IPv6 header: 40B -| ${srv6_overhead_nosrh}= | ${40} -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip6-ip6src253 - -*** Keywords *** -| Local template -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with ${phy_cores} phy -| | ... | core(s). -| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ -| | ... | trial throughput test. -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_limit} | ${framesize} | overhead=${srv6_overhead_nosrh} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize IPv6 forwarding over SRv6 with encapsulation with '1' x SID 'with' decapsulation in 3-node circular topology -| | Then Traffic should pass with maximum rate -| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} - -*** Test Cases *** -| tc01-78B-1c-ethip6ip6-ip6base-srv6enc1sid-mrr -| | [Tags] | 78B | 1C -| | framesize=${78} | phy_cores=${1} - -| tc02-78B-2c-ethip6ip6-ip6base-srv6enc1sid-mrr -| | [Tags] | 78B | 2C -| | framesize=${78} | phy_cores=${2} - -| tc03-78B-4c-ethip6ip6-ip6base-srv6enc1sid-mrr -| | [Tags] | 78B | 4C -| | framesize=${78} | phy_cores=${4} - -| tc04-1518B-1c-ethip6ip6-ip6base-srv6enc1sid-mrr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-ethip6ip6-ip6base-srv6enc1sid-mrr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-ethip6ip6-ip6base-srv6enc1sid-mrr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-ethip6ip6-ip6base-srv6enc1sid-mrr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-ethip6ip6-ip6base-srv6enc1sid-mrr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-ethip6ip6-ip6base-srv6enc1sid-mrr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-ethip6ip6-ip6base-srv6enc1sid-mrr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-ethip6ip6-ip6base-srv6enc1sid-mrr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-ethip6ip6-ip6base-srv6enc1sid-mrr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6enc2sids-mrr.robot b/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6enc2sids-mrr.robot deleted file mode 100644 index a89c468f22..0000000000 --- a/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6enc2sids-mrr.robot +++ /dev/null @@ -1,151 +0,0 @@ -# Copyright (c) 2018 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR -| ... | NIC_Intel-X520-DA2 | ETH | IP6FWD | FEATURE | SRv6 -| ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L3 | Intel-X520-DA2 -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Tear down mrr test with SRv6 with encapsulation -| ... -| Test Template | Local template -| ... -| Documentation | *Raw results for Segment routing over IPv6 dataplane with\ -| ... | two SIDs (SRH inserted) test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-SRH-IPv6 on DUT1-DUT2, Eth-IPv6\ -| ... | on TG-DUTn for IPv6 routing over SRv6. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\ -| ... | routing and static route, SR policy and steering policy for one\ -| ... | direction and two SR behaviours (functions) - End and End.DX6 - for\ -| ... | other direction. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic\ -| ... | by Intel. -| ... | *[Ver] TG verification:* In MaxReceivedRate tests TG sends traffic\ -| ... | at line rate and reports total received/sent packets over trial period.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, 253 flows per flow-group) with\ -| ... | all packets containing Ethernet header,IPv6 header with static payload.\ -| ... | MAC addresses are matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* SRv6 Network Programming -\ -| ... | draft 3. - -*** Variables *** -# X520-DA2 bandwidth limit -| ${s_limit}= | ${10000000000} -# SIDs -| ${dut1_sid1}= | 2002:1:: -| ${dut1_sid2_1}= | 2003:2:: -| ${dut1_sid2_2}= | 2003:3:: -| ${dut1_bsid}= | 2002:1::1 -| ${dut2_sid1_1}= | 2002:2:: -| ${dut2_sid1_2}= | 2002:3:: -| ${dut2_sid2}= | 2003:1:: -| ${dut2_bsid}= | 2002:2::1 -| ${sid_prefix}= | ${64} -# IP settings -| ${tg_if1_ip6_subnet}= | 2001:1:: -| ${tg_if2_ip6_subnet}= | 2001:2:: -| ${dst_addr_nr}= | ${1} -| ${dut1_if1_ip6}= | 2001:1::1 -| ${dut1_if2_ip6}= | 2001:3::1 -| ${dut2_if1_ip6}= | 2001:3::2 -| ${dut2_if2_ip6}= | 2001:2::1 -| ${prefix}= | ${64} -# outer IPv6 header + SRH with 2 SIDs: 40+40B -| ${srv6_overhead_2sids}= | ${80} -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip6-ip6src253 - -*** Keywords *** -| Local template -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with ${phy_cores} phy -| | ... | core(s). -| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ -| | ... | trial throughput test. -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_limit} | ${framesize} | overhead=${srv6_overhead_2sids} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize IPv6 forwarding over SRv6 with encapsulation with '2' x SID 'with' decapsulation in 3-node circular topology -| | Then Traffic should pass with maximum rate -| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} - -*** Test Cases *** -| tc01-78B-1c-ethip6srhip6-ip6base-srv6enc2sids-mrr -| | [Tags] | 78B | 1C -| | framesize=${78} | phy_cores=${1} - -| tc02-78B-2c-ethip6srhip6-ip6base-srv6enc2sids-mrr -| | [Tags] | 78B | 2C -| | framesize=${78} | phy_cores=${2} - -| tc03-78B-4c-ethip6srhip6-ip6base-srv6enc2sids-mrr -| | [Tags] | 78B | 4C -| | framesize=${78} | phy_cores=${4} - -| tc04-1518B-1c-ethip6srhip6-ip6base-srv6enc2sids-mrr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-ethip6srhip6-ip6base-srv6enc2sids-mrr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-ethip6srhip6-ip6base-srv6enc2sids-mrr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-ethip6srhip6-ip6base-srv6enc2sids-mrr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-ethip6srhip6-ip6base-srv6enc2sids-mrr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-ethip6srhip6-ip6base-srv6enc2sids-mrr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-ethip6srhip6-ip6base-srv6enc2sids-mrr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-ethip6srhip6-ip6base-srv6enc2sids-mrr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-ethip6srhip6-ip6base-srv6enc2sids-mrr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-mrr.robot b/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-mrr.robot deleted file mode 100644 index 017a317cf0..0000000000 --- a/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-mrr.robot +++ /dev/null @@ -1,150 +0,0 @@ -# Copyright (c) 2018 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR -| ... | NIC_Intel-X520-DA2 | ETH | IP6FWD | FEATURE | SRv6 -| ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L3 | Intel-X520-DA2 -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Tear down mrr test with SRv6 with encapsulation -| ... -| Test Template | Local template -| ... -| Documentation | *Raw results for Segment routing over IPv6 dataplane with\ -| ... | two SIDs (SRH inserted) without decapsulation test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-SRH-IPv6 on DUT1-DUT2 and\ -| ... | DUTn->TG, Eth-IPv6 on TG->DUTn for IPv6 routing over SRv6. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\ -| ... | routing and static route, SR policy and steering policy for one\ -| ... | direction and one SR behaviour (function) - End - for other direction.\ -| ... | DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel. -| ... | *[Ver] TG verification:* In MaxReceivedRate tests TG sends traffic\ -| ... | at line rate and reports total received/sent packets over trial period.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, 253 flows per flow-group) with\ -| ... | all packets containing Ethernet header,IPv6 header with static payload.\ -| ... | MAC addresses are matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* SRv6 Network Programming -\ -| ... | draft 3. - -*** Variables *** -# X520-DA2 bandwidth limit -| ${s_limit}= | ${10000000000} -# SIDs -| ${dut1_sid1}= | 2002:1:: -| ${dut1_sid2_1}= | 2003:2:: -| ${dut1_sid2_2}= | 2003:3:: -| ${dut1_bsid}= | 2002:1::1 -| ${dut2_sid1_1}= | 2002:2:: -| ${dut2_sid1_2}= | 2002:3:: -| ${dut2_sid2}= | 2003:1:: -| ${dut2_bsid}= | 2002:2::1 -| ${sid_prefix}= | ${64} -# IP settings -| ${tg_if1_ip6_subnet}= | 2001:1:: -| ${tg_if2_ip6_subnet}= | 2001:2:: -| ${dst_addr_nr}= | ${1} -| ${dut1_if1_ip6}= | 2001:1::1 -| ${dut1_if2_ip6}= | 2001:3::1 -| ${dut2_if1_ip6}= | 2001:3::2 -| ${dut2_if2_ip6}= | 2001:2::1 -| ${prefix}= | ${64} -# outer IPv6 header + SRH with 2 SIDs: 40+40B -| ${srv6_overhead_2sids}= | ${80} -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip6-ip6src253 - -*** Keywords *** -| Local template -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with ${phy_cores} phy -| | ... | core(s). -| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ -| | ... | trial throughput test. -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_limit} | ${framesize} | overhead=${srv6_overhead_2sids} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize IPv6 forwarding over SRv6 with encapsulation with '2' x SID 'without' decapsulation in 3-node circular topology -| | Then Traffic should pass with maximum rate -| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} - -*** Test Cases *** -| tc01-78B-1c-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-mrr -| | [Tags] | 78B | 1C -| | framesize=${78} | phy_cores=${1} - -| tc02-78B-2c-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-mrr -| | [Tags] | 78B | 2C -| | framesize=${78} | phy_cores=${2} - -| tc03-78B-4c-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-mrr -| | [Tags] | 78B | 4C -| | framesize=${78} | phy_cores=${4} - -| tc04-1518B-1c-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-mrr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-mrr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-mrr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-mrr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-mrr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-mrr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-mrr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-mrr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-mrr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-dyn-mrr.robot b/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-dyn-mrr.robot deleted file mode 100644 index 4d84c9b430..0000000000 --- a/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-dyn-mrr.robot +++ /dev/null @@ -1,169 +0,0 @@ -# Copyright (c) 2018 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR -| ... | NIC_Intel-X520-DA2 | SRv6 | IP6FWD | FEATURE | SRv6_PROXY -| ... | SRv6_PROXY_DYN | MEMIF | LXC -| ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L3 -| ... | Intel-X520-DA2 -| ... | AND | Set up performance test suite with MEMIF -| ... | AND | Set up performance test suite with Dynamic SRv6 proxy -| ... -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Run Keywords -| ... | Tear down mrr test with SRv6 with encapsulation -| ... | AND | Tear down performance test with container -| ... -| Test Template | Local template -| ... -| Documentation | *Raw results for Segment routing over IPv6 dataplane with\ -| ... | Dynamic SRv6 proxy test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-SRH-IPv6 on DUT1-DUT2 and\ -| ... | DUTn->TG, Eth-IPv6 on TG->DUTn and DUTn-LXC for IPv6 routing over SRv6. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\ -| ... | routing and static route, SR policy and steering policy for one\ -| ... | direction and one SR behaviour (function) - End.AD - for other\ -| ... | direction. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic\ -| ... | by Intel. -| ... | *[Ver] TG verification:* In MaxReceivedRate tests TG sends traffic\ -| ... | at line rate and reports total received/sent packets over trial period.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, 253 flows per flow-group) with\ -| ... | all packets containing Ethernet header,IPv6 header with static payload.\ -| ... | MAC addresses are matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* SRv6 Network Programming -\ -| ... | draft 3 and Segment Routing for Service Chaining - internet draft 01. - -*** Variables *** -# X520-DA2 bandwidth limit -| ${s_limit}= | ${10000000000} -# SIDs -| ${dut1_sid1}= | 2002:1:: -| ${dut1_sid2}= | 2003:2:: -| ${dut1_bsid}= | 2002:1::1 -| ${dut2_sid1}= | 2002:2:: -| ${dut2_sid2}= | 2003:1:: -| ${dut2_bsid}= | 2003:1::1 -| ${out_sid1_1}= | 2002:3:: -| ${out_sid1_2}= | 2002:4:: -| ${out_sid2_1}= | 2003:3:: -| ${out_sid2_2}= | 2003:4:: -| ${sid_prefix}= | ${64} -# IP settings -| ${tg_if1_ip6_subnet}= | 2001:1:: -| ${tg_if2_ip6_subnet}= | 2001:2:: -| ${dut1_if1_ip6}= | 2001:1::1 -| ${dut1_if2_ip6}= | 2001:3::1 -| ${dut1-memif-1-if1_ip6}= | 3001:1::1 -| ${dut1-memif-1-if2_ip6}= | 3001:1::2 -| ${dut1_nh}= | 4002:: -| ${dut2_if1_ip6}= | 2001:3::2 -| ${dut2_if2_ip6}= | 2001:2::1 -| ${dut2-memif-1-if1_ip6}= | 3002:1::1 -| ${dut2-memif-1-if2_ip6}= | 3002:1::2 -| ${dut2_nh}= | 4001:: -| ${prefix}= | ${64} -# outer IPv6 header + SRH with 3 SIDs: 40+(8+3*16)B -| ${srv6_overhead_3sids}= | ${96} -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip6-ip6src253 -# Container -| ${container_engine}= | LXC -| ${container_chain_topology}= | chain - -*** Keywords *** -| Local template -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with ${phy_cores} phy -| | ... | core(s). -| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ -| | ... | trial throughput test. -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_limit} | ${framesize} | overhead=${srv6_overhead_3sids} -| | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers | nf_chains=${1} | nf_nodes=${1} -| | When Initialize IPv6 forwarding over SRv6 with endpoint to SR-unaware Service Function via 'dynamic_proxy' behaviour in 3-node circular topology -| | Then Traffic should pass with maximum rate -| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} - -*** Test Cases *** -| tc01-78B-1c-ethip6srhip6-ip6base-srv6proxy-dyn-mrr -| | [Tags] | 78B | 1C -| | framesize=${78} | phy_cores=${1} - -| tc02-78B-2c-ethip6srhip6-ip6base-srv6proxy-dyn-mrr -| | [Tags] | 78B | 2C -| | framesize=${78} | phy_cores=${2} - -| tc03-78B-4c-ethip6srhip6-ip6base-srv6proxy-dyn-mrr -| | [Tags] | 78B | 4C -| | framesize=${78} | phy_cores=${4} - -| tc04-1518B-1c-ethip6srhip6-ip6base-srv6proxy-dyn-mrr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-ethip6srhip6-ip6base-srv6proxy-dyn-mrr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-ethip6srhip6-ip6base-srv6proxy-dyn-mrr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-ethip6srhip6-ip6base-srv6proxy-dyn-mrr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-ethip6srhip6-ip6base-srv6proxy-dyn-mrr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-ethip6srhip6-ip6base-srv6proxy-dyn-mrr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-ethip6srhip6-ip6base-srv6proxy-dyn-mrr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-ethip6srhip6-ip6base-srv6proxy-dyn-mrr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-ethip6srhip6-ip6base-srv6proxy-dyn-mrr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-masq-mrr.robot b/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-masq-mrr.robot deleted file mode 100644 index 3de8e50bed..0000000000 --- a/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-masq-mrr.robot +++ /dev/null @@ -1,169 +0,0 @@ -# Copyright (c) 2018 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR -| ... | NIC_Intel-X520-DA2 | SRv6 | IP6FWD | FEATURE | SRv6_PROXY -| ... | SRv6_PROXY_MASQ | MEMIF | LXC -| ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L3 -| ... | Intel-X520-DA2 -| ... | AND | Set up performance test suite with MEMIF -| ... | AND | Set up performance test suite with Masquerading SRv6 proxy -| ... -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Run Keywords -| ... | Tear down mrr test with SRv6 with encapsulation -| ... | AND | Tear down performance test with container -| ... -| Test Template | Local template -| ... -| Documentation | *Raw results for Segment routing over IPv6 dataplane with\ -| ... | Masquerading SRv6 proxy test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-SRH-IPv6 on DUT1-DUT2, DUTn-LXC\ -| ... | and DUTn->TG, Eth-IPv6 on TG->DUTn for IPv6 routing over SRv6. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\ -| ... | routing and static route, SR policy and steering policy for one\ -| ... | direction and one SR behaviour (function) - End.AM - for other\ -| ... | direction. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic\ -| ... | by Intel. -| ... | *[Ver] TG verification:* In MaxReceivedRate tests TG sends traffic\ -| ... | at line rate and reports total received/sent packets over trial period.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, 253 flows per flow-group) with\ -| ... | all packets containing Ethernet header,IPv6 header with static payload.\ -| ... | MAC addresses are matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* SRv6 Network Programming -\ -| ... | draft 3 and Segment Routing for Service Chaining - internet draft 01. - -*** Variables *** -# X520-DA2 bandwidth limit -| ${s_limit}= | ${10000000000} -# SIDs -| ${dut1_sid1}= | 2002:1:: -| ${dut1_sid2}= | 2003:2:: -| ${dut1_bsid}= | 2002:1::1 -| ${dut2_sid1}= | 2002:2:: -| ${dut2_sid2}= | 2003:1:: -| ${dut2_bsid}= | 2003:1::1 -| ${out_sid1_1}= | 2002:3:: -| ${out_sid1_2}= | 2002:4:: -| ${out_sid2_1}= | 2003:3:: -| ${out_sid2_2}= | 2003:4:: -| ${sid_prefix}= | ${64} -# IP settings -| ${tg_if1_ip6_subnet}= | 2001:1:: -| ${tg_if2_ip6_subnet}= | 2001:2:: -| ${dut1_if1_ip6}= | 2001:1::1 -| ${dut1_if2_ip6}= | 2001:3::1 -| ${dut1-memif-1-if1_ip6}= | 3001:1::1 -| ${dut1-memif-1-if2_ip6}= | 3001:1::2 -| ${dut1_nh}= | 4002:: -| ${dut2_if1_ip6}= | 2001:3::2 -| ${dut2_if2_ip6}= | 2001:2::1 -| ${dut2-memif-1-if1_ip6}= | 3002:1::1 -| ${dut2-memif-1-if2_ip6}= | 3002:1::2 -| ${dut2_nh}= | 4001:: -| ${prefix}= | ${64} -# outer IPv6 header + SRH with 3 SIDs: 40+(8+3*16)B -| ${srv6_overhead_3sids}= | ${96} -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip6-ip6src253 -# Container -| ${container_engine}= | LXC -| ${container_chain_topology}= | chain - -*** Keywords *** -| Local template -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with ${phy_cores} phy -| | ... | core(s). -| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ -| | ... | trial throughput test. -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_limit} | ${framesize} | overhead=${srv6_overhead_3sids} -| | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers | nf_chains=${1} | nf_nodes=${1} -| | When Initialize IPv6 forwarding over SRv6 with endpoint to SR-unaware Service Function via 'masquerading' behaviour in 3-node circular topology -| | Then Traffic should pass with maximum rate -| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} - -*** Test Cases *** -| tc01-78B-1c-ethip6srhip6-ip6base-srv6proxy-masq-mrr -| | [Tags] | 78B | 1C -| | framesize=${78} | phy_cores=${1} - -| tc02-78B-2c-ethip6srhip6-ip6base-srv6proxy-masq-mrr -| | [Tags] | 78B | 2C -| | framesize=${78} | phy_cores=${2} - -| tc03-78B-4c-ethip6srhip6-ip6base-srv6proxy-masq-mrr -| | [Tags] | 78B | 4C -| | framesize=${78} | phy_cores=${4} - -| tc04-1518B-1c-ethip6srhip6-ip6base-srv6proxy-masq-mrr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-ethip6srhip6-ip6base-srv6proxy-masq-mrr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-ethip6srhip6-ip6base-srv6proxy-masq-mrr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-ethip6srhip6-ip6base-srv6proxy-masq-mrr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-ethip6srhip6-ip6base-srv6proxy-masq-mrr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-ethip6srhip6-ip6base-srv6proxy-masq-mrr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-ethip6srhip6-ip6base-srv6proxy-masq-mrr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-ethip6srhip6-ip6base-srv6proxy-masq-mrr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-ethip6srhip6-ip6base-srv6proxy-masq-mrr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-stat-mrr.robot b/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-stat-mrr.robot deleted file mode 100644 index 41f33b0c84..0000000000 --- a/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-stat-mrr.robot +++ /dev/null @@ -1,169 +0,0 @@ -# Copyright (c) 2018 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR -| ... | NIC_Intel-X520-DA2 | SRv6 | IP6FWD | FEATURE | SRv6_PROXY -| ... | SRv6_PROXY_STAT | MEMIF | LXC -| ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L3 -| ... | Intel-X520-DA2 -| ... | AND | Set up performance test suite with MEMIF -| ... | AND | Set up performance test suite with Static SRv6 proxy -| ... -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Run Keywords -| ... | Tear down mrr test with SRv6 with encapsulation -| ... | AND | Tear down performance test with container -| ... -| Test Template | Local template -| ... -| Documentation | *Packet throughput Segment routing over IPv6 dataplane with\ -| ... | Static SRv6 proxy test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-SRH-IPv6 on DUT1-DUT2 and\ -| ... | DUTn->TG, Eth-IPv6 on TG->DUTn and DUTn-LXC for IPv6 routing over SRv6. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\ -| ... | routing and static route, SR policy and steering policy for one\ -| ... | direction and one SR behaviour (function) - End.AS - for other\ -| ... | direction. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic\ -| ... | by Intel. -| ... | *[Ver] TG verification:* In MaxReceivedRate tests TG sends traffic\ -| ... | at line rate and reports total received/sent packets over trial period.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, 253 flows per flow-group) with\ -| ... | all packets containing Ethernet header,IPv6 header with static payload.\ -| ... | MAC addresses are matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* SRv6 Network Programming -\ -| ... | draft 3 and Segment Routing for Service Chaining - internet draft 01. - -*** Variables *** -# X520-DA2 bandwidth limit -| ${s_limit}= | ${10000000000} -# SIDs -| ${dut1_sid1}= | 2002:1:: -| ${dut1_sid2}= | 2003:2:: -| ${dut1_bsid}= | 2002:1::1 -| ${dut2_sid1}= | 2002:2:: -| ${dut2_sid2}= | 2003:1:: -| ${dut2_bsid}= | 2003:1::1 -| ${out_sid1_1}= | 2002:3:: -| ${out_sid1_2}= | 2002:4:: -| ${out_sid2_1}= | 2003:3:: -| ${out_sid2_2}= | 2003:4:: -| ${sid_prefix}= | ${64} -# IP settings -| ${tg_if1_ip6_subnet}= | 2001:1:: -| ${tg_if2_ip6_subnet}= | 2001:2:: -| ${dut1_if1_ip6}= | 2001:1::1 -| ${dut1_if2_ip6}= | 2001:3::1 -| ${dut1-memif-1-if1_ip6}= | 3001:1::1 -| ${dut1-memif-1-if2_ip6}= | 3001:1::2 -| ${dut1_nh}= | 4002:: -| ${dut2_if1_ip6}= | 2001:3::2 -| ${dut2_if2_ip6}= | 2001:2::1 -| ${dut2-memif-1-if1_ip6}= | 3002:1::1 -| ${dut2-memif-1-if2_ip6}= | 3002:1::2 -| ${dut2_nh}= | 4001:: -| ${prefix}= | ${64} -# outer IPv6 header + SRH with 3 SIDs: 40+(8+3*16)B -| ${srv6_overhead_3sids}= | ${96} -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip6-ip6src253 -# Container -| ${container_engine}= | LXC -| ${container_chain_topology}= | chain - -*** Keywords *** -| Local template -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with ${phy_cores} phy -| | ... | core(s). -| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ -| | ... | trial throughput test. -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_limit} | ${framesize} | overhead=${srv6_overhead_3sids} -| | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers | nf_chains=${1} | nf_nodes=${1} -| | When Initialize IPv6 forwarding over SRv6 with endpoint to SR-unaware Service Function via 'static_proxy' behaviour in 3-node circular topology -| | Then Traffic should pass with maximum rate -| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} - -*** Test Cases *** -| tc01-78B-1c-ethip6srhip6-ip6base-srv6proxy-stat-mrr -| | [Tags] | 78B | 1C -| | framesize=${78} | phy_cores=${1} - -| tc02-78B-2c-ethip6srhip6-ip6base-srv6proxy-stat-mrr -| | [Tags] | 78B | 2C -| | framesize=${78} | phy_cores=${2} - -| tc03-78B-4c-ethip6srhip6-ip6base-srv6proxy-stat-mrr -| | [Tags] | 78B | 4C -| | framesize=${78} | phy_cores=${4} - -| tc04-1518B-1c-ethip6srhip6-ip6base-srv6proxy-stat-mrr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-ethip6srhip6-ip6base-srv6proxy-stat-mrr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-ethip6srhip6-ip6base-srv6proxy-stat-mrr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-ethip6srhip6-ip6base-srv6proxy-stat-mrr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-ethip6srhip6-ip6base-srv6proxy-stat-mrr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-ethip6srhip6-ip6base-srv6proxy-stat-mrr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-ethip6srhip6-ip6base-srv6proxy-stat-mrr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-ethip6srhip6-ip6base-srv6proxy-stat-mrr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-ethip6srhip6-ip6base-srv6proxy-stat-mrr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/srv6/10ge2p1x520-ethip6ip6-ip6base-srv6enc1sid-ndrpdr.robot b/tests/vpp/perf/srv6/10ge2p1x710-ethip6ip6-ip6base-srv6enc1sid-ndrpdr.robot index 1b1d00e9c3..cc6fd3aa7e 100644 --- a/tests/vpp/perf/srv6/10ge2p1x520-ethip6ip6-ip6base-srv6enc1sid-ndrpdr.robot +++ b/tests/vpp/perf/srv6/10ge2p1x710-ethip6ip6-ip6base-srv6enc1sid-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2018 Cisco and/or its affiliates. +# Copyright (c) 2019 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -15,16 +15,14 @@ | Resource | resources/libraries/robot/performance/performance_setup.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X520-DA2 | ETH | IP6FWD | FEATURE | SRv6 +| ... | NIC_Intel-X710 | ETH | IP6FWD | FEATURE | SRv6 | SRv6_1SID | ... | Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L3 | Intel-X520-DA2 +| ... | L3 | ${nic_name} | Suite Teardown | Tear down 3-node performance topology | ... | Test Setup | Set up performance test -| ... | Test Teardown | Tear down performance test with SRv6 with encapsulation -| ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... | Test Template | Local Template | ... @@ -38,12 +36,12 @@ | ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\ | ... | routing and static route, SR policy and steering policy for one\ | ... | direction and one SR behaviour (function) - End - for other direction.\ -| ... | DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel. +| ... | DUT1 and DUT2 are tested with ${nic_name}.\ | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ | ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ | ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ | ... | Test packets are generated by TG on\ | ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ | ... | (flow-group per direction, 253 flows per flow-group) with\ @@ -53,8 +51,9 @@ | ... | draft 3. *** Variables *** -# X520-DA2 bandwidth limit -| ${s_limit}= | ${10000000000} +| ${nic_name}= | Intel-X710 +# outer IPv6 header: 40B +| ${overhead}= | ${40} # SIDs | ${dut1_sid1}= | 2002:1:: | ${dut1_sid2}= | 2003:2:: @@ -72,8 +71,6 @@ | ${dut2_if1_ip6}= | 2001:3::2 | ${dut2_if2_ip6}= | 2001:2::1 | ${prefix}= | ${64} -# outer IPv6 header: 40B -| ${srv6_overhead_nosrh}= | ${40} # Traffic profile: | ${traffic_profile}= | trex-sl-3n-ethip6-ip6src253 @@ -84,73 +81,70 @@ | | ... | routing and static route, SR policy and steering policy for one\ | | ... | direction and one SR behaviour (function) - End - for other direction. | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ | | ... | | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). | | ... | Type: integer, string | | ... | - phy_cores - Number of physical cores. Type: integer | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer | | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} | | ... -| | Set Test Variable | ${framesize} -| | Set Test Variable | ${min_rate} | ${10000} +| | Set Test Variable | \${frame_size} | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_limit} | ${framesize} | overhead=${srv6_overhead_nosrh} +| | Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv6 forwarding over SRv6 with encapsulation with '1' x SID 'with' decapsulation in 3-node circular topology | | Then Find NDR and PDR intervals using optimized search -| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} *** Test Cases *** | tc01-78B-1c-ethip6ip6-ip6base-srv6enc1sid-ndrpdr | | [Tags] | 78B | 1C -| | framesize=${78} | phy_cores=${1} +| | frame_size=${78} | phy_cores=${1} | tc02-78B-2c-ethip6ip6-ip6base-srv6enc1sid-ndrpdr | | [Tags] | 78B | 2C -| | framesize=${78} | phy_cores=${2} +| | frame_size=${78} | phy_cores=${2} | tc03-78B-4c-ethip6ip6-ip6base-srv6enc1sid-ndrpdr | | [Tags] | 78B | 4C -| | framesize=${78} | phy_cores=${4} +| | frame_size=${78} | phy_cores=${4} | tc04-1518B-1c-ethip6ip6-ip6base-srv6enc1sid-ndrpdr | | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} +| | frame_size=${1518} | phy_cores=${1} | tc05-1518B-2c-ethip6ip6-ip6base-srv6enc1sid-ndrpdr | | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} +| | frame_size=${1518} | phy_cores=${2} | tc06-1518B-4c-ethip6ip6-ip6base-srv6enc1sid-ndrpdr | | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} +| | frame_size=${1518} | phy_cores=${4} | tc07-9000B-1c-ethip6ip6-ip6base-srv6enc1sid-ndrpdr | | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} +| | frame_size=${9000} | phy_cores=${1} | tc08-9000B-2c-ethip6ip6-ip6base-srv6enc1sid-ndrpdr | | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} +| | frame_size=${9000} | phy_cores=${2} | tc09-9000B-4c-ethip6ip6-ip6base-srv6enc1sid-ndrpdr | | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} +| | frame_size=${9000} | phy_cores=${4} | tc10-IMIX-1c-ethip6ip6-ip6base-srv6enc1sid-ndrpdr | | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} +| | frame_size=IMIX_v4_1 | phy_cores=${1} | tc11-IMIX-2c-ethip6ip6-ip6base-srv6enc1sid-ndrpdr | | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} +| | frame_size=IMIX_v4_1 | phy_cores=${2} | tc12-IMIX-4c-ethip6ip6-ip6base-srv6enc1sid-ndrpdr | | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6enc2sids-ndrpdr.robot b/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-ndrpdr.robot index d481b7e89b..bbcd155960 100644 --- a/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6enc2sids-ndrpdr.robot +++ b/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2018 Cisco and/or its affiliates. +# Copyright (c) 2019 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -15,16 +15,14 @@ | Resource | resources/libraries/robot/performance/performance_setup.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X520-DA2 | ETH | IP6FWD | FEATURE | SRv6 +| ... | NIC_Intel-X710 | ETH | IP6FWD | FEATURE | SRv6 | SRv6_2SID_DECAP | ... | Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L3 | Intel-X520-DA2 +| ... | L3 | ${nic_name} | Suite Teardown | Tear down 3-node performance topology | ... | Test Setup | Set up performance test -| ... | Test Teardown | Tear down performance test with SRv6 with encapsulation -| ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... | Test Template | Local Template | ... @@ -38,13 +36,12 @@ | ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\ | ... | routing and static route, SR policy and steering policy for one\ | ... | direction and two SR behaviours (functions) - End and End.DX6 - for\ -| ... | other direction. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic\ -| ... | by Intel. +| ... | other direction. DUT1 and DUT2 are tested with ${nic_name}.\ | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ | ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ | ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ | ... | Test packets are generated by TG on\ | ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ | ... | (flow-group per direction, 253 flows per flow-group) with\ @@ -54,8 +51,9 @@ | ... | draft 3. *** Variables *** -# X520-DA2 bandwidth limit -| ${s_limit}= | ${10000000000} +| ${nic_name}= | Intel-X710 +# outer IPv6 header + SRH with 2 SIDs: 40+40B +| ${overhead}= | ${80} # SIDs | ${dut1_sid1}= | 2002:1:: | ${dut1_sid2_1}= | 2003:2:: @@ -76,8 +74,6 @@ | ${dut2_if1_ip6}= | 2001:3::2 | ${dut2_if2_ip6}= | 2001:2::1 | ${prefix}= | ${64} -# outer IPv6 header + SRH with 2 SIDs: 40+40B -| ${srv6_overhead_2sids}= | ${80} # Traffic profile: | ${traffic_profile}= | trex-sl-3n-ethip6-ip6src253 @@ -88,73 +84,70 @@ | | ... | routing and static route, SR policy and steering policy for one\ | | ... | direction and one SR behaviour (function) - End - for other direction. | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ | | ... | | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). | | ... | Type: integer, string | | ... | - phy_cores - Number of physical cores. Type: integer | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer | | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} | | ... -| | Set Test Variable | ${framesize} -| | Set Test Variable | ${min_rate} | ${10000} +| | Set Test Variable | \${frame_size} | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_limit} | ${framesize} | overhead=${srv6_overhead_2sids} +| | Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv6 forwarding over SRv6 with encapsulation with '2' x SID 'with' decapsulation in 3-node circular topology | | Then Find NDR and PDR intervals using optimized search -| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} *** Test Cases *** | tc01-78B-1c-ethip6srhip6-ip6base-srv6enc2sids-ndrpdr | | [Tags] | 78B | 1C -| | framesize=${78} | phy_cores=${1} +| | frame_size=${78} | phy_cores=${1} | tc02-78B-2c-ethip6srhip6-ip6base-srv6enc2sids-ndrpdr | | [Tags] | 78B | 2C -| | framesize=${78} | phy_cores=${2} +| | frame_size=${78} | phy_cores=${2} | tc03-78B-4c-ethip6srhip6-ip6base-srv6enc2sids-ndrpdr | | [Tags] | 78B | 4C -| | framesize=${78} | phy_cores=${4} +| | frame_size=${78} | phy_cores=${4} | tc04-1518B-1c-ethip6srhip6-ip6base-srv6enc2sids-ndrpdr | | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} +| | frame_size=${1518} | phy_cores=${1} | tc05-1518B-2c-ethip6srhip6-ip6base-srv6enc2sids-ndrpdr | | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} +| | frame_size=${1518} | phy_cores=${2} | tc06-1518B-4c-ethip6srhip6-ip6base-srv6enc2sids-ndrpdr | | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} +| | frame_size=${1518} | phy_cores=${4} | tc07-9000B-1c-ethip6srhip6-ip6base-srv6enc2sids-ndrpdr | | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} +| | frame_size=${9000} | phy_cores=${1} | tc08-9000B-2c-ethip6srhip6-ip6base-srv6enc2sids-ndrpdr | | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} +| | frame_size=${9000} | phy_cores=${2} | tc09-9000B-4c-ethip6srhip6-ip6base-srv6enc2sids-ndrpdr | | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} +| | frame_size=${9000} | phy_cores=${4} | tc10-IMIX-1c-ethip6srhip6-ip6base-srv6enc2sids-ndrpdr | | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} +| | frame_size=IMIX_v4_1 | phy_cores=${1} | tc11-IMIX-2c-ethip6srhip6-ip6base-srv6enc2sids-ndrpdr | | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} +| | frame_size=IMIX_v4_1 | phy_cores=${2} | tc12-IMIX-4c-ethip6srhip6-ip6base-srv6enc2sids-ndrpdr | | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-ndrpdr.robot b/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-ndrpdr.robot index a2b5d049e7..8a96b69bef 100644 --- a/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-ndrpdr.robot +++ b/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2018 Cisco and/or its affiliates. +# Copyright (c) 2019 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -15,16 +15,14 @@ | Resource | resources/libraries/robot/performance/performance_setup.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X520-DA2 | ETH | IP6FWD | FEATURE | SRv6 +| ... | NIC_Intel-X710 | ETH | IP6FWD | FEATURE | SRv6 | SRv6_2SID_NODECAP | ... | Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L3 | Intel-X520-DA2 +| ... | L3 | ${nic_name} | Suite Teardown | Tear down 3-node performance topology | ... | Test Setup | Set up performance test -| ... | Test Teardown | Tear down performance test with SRv6 with encapsulation -| ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... | Test Template | Local Template | ... @@ -38,12 +36,12 @@ | ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\ | ... | routing and static route, SR policy and steering policy for one\ | ... | direction and one SR behaviour (function) - End - for other direction.\ -| ... | DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel. +| ... | DUT1 and DUT2 are tested with ${nic_name}.\ | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ | ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ | ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ | ... | Test packets are generated by TG on\ | ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ | ... | (flow-group per direction, 253 flows per flow-group) with\ @@ -53,8 +51,9 @@ | ... | draft 3. *** Variables *** -# X520-DA2 bandwidth limit -| ${s_limit}= | ${10000000000} +| ${nic_name}= | Intel-X710 +# outer IPv6 header + SRH with 2 SIDs: 40+40B +| ${overhead}= | ${80} # SIDs | ${dut1_sid1}= | 2002:1:: | ${dut1_sid2_1}= | 2003:2:: @@ -75,8 +74,6 @@ | ${dut2_if1_ip6}= | 2001:3::2 | ${dut2_if2_ip6}= | 2001:2::1 | ${prefix}= | ${64} -# outer IPv6 header + SRH with 2 SIDs: 40+40B -| ${srv6_overhead_2sids}= | ${80} # Traffic profile: | ${traffic_profile}= | trex-sl-3n-ethip6-ip6src253 @@ -87,73 +84,70 @@ | | ... | routing and static route, SR policy and steering policy for one\ | | ... | direction and one SR behaviour (function) - End - for other direction. | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ | | ... | | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). | | ... | Type: integer, string | | ... | - phy_cores - Number of physical cores. Type: integer | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer | | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} | | ... -| | Set Test Variable | ${framesize} -| | Set Test Variable | ${min_rate} | ${10000} +| | Set Test Variable | \${frame_size} | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_limit} | ${framesize} | overhead=${srv6_overhead_2sids} +| | Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv6 forwarding over SRv6 with encapsulation with '2' x SID 'without' decapsulation in 3-node circular topology | | Then Find NDR and PDR intervals using optimized search -| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} *** Test Cases *** | tc01-78B-1c-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-ndrpdr | | [Tags] | 78B | 1C -| | framesize=${78} | phy_cores=${1} +| | frame_size=${78} | phy_cores=${1} | tc02-78B-2c-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-ndrpdr | | [Tags] | 78B | 2C -| | framesize=${78} | phy_cores=${2} +| | frame_size=${78} | phy_cores=${2} | tc03-78B-4c-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-ndrpdr | | [Tags] | 78B | 4C -| | framesize=${78} | phy_cores=${4} +| | frame_size=${78} | phy_cores=${4} | tc04-1518B-1c-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-ndrpdr | | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} +| | frame_size=${1518} | phy_cores=${1} | tc05-1518B-2c-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-ndrpdr | | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} +| | frame_size=${1518} | phy_cores=${2} | tc06-1518B-4c-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-ndrpdr | | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} +| | frame_size=${1518} | phy_cores=${4} | tc07-9000B-1c-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-ndrpdr | | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} +| | frame_size=${9000} | phy_cores=${1} | tc08-9000B-2c-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-ndrpdr | | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} +| | frame_size=${9000} | phy_cores=${2} | tc09-9000B-4c-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-ndrpdr | | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} +| | frame_size=${9000} | phy_cores=${4} | tc10-IMIX-1c-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-ndrpdr | | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} +| | frame_size=IMIX_v4_1 | phy_cores=${1} | tc11-IMIX-2c-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-ndrpdr | | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} +| | frame_size=IMIX_v4_1 | phy_cores=${2} | tc12-IMIX-4c-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-ndrpdr | | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-dyn-ndrpdr.robot b/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-dyn-ndrpdr.robot index 574cf8958d..d05e271d64 100644 --- a/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-dyn-ndrpdr.robot +++ b/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-dyn-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2018 Cisco and/or its affiliates. +# Copyright (c) 2019 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -15,22 +15,19 @@ | Resource | resources/libraries/robot/performance/performance_setup.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X520-DA2 | SRv6 | IP6FWD | FEATURE | SRv6_PROXY +| ... | NIC_Intel-X710 | SRv6 | IP6FWD | FEATURE | SRv6_PROXY | ... | SRv6_PROXY_DYN | MEMIF | LXC | ... | Suite Setup | Run Keywords | ... | Set up 3-node performance topology with DUT's NIC model | L3 -| ... | Intel-X520-DA2 +| ... | ${nic_name} | ... | AND | Set up performance test suite with MEMIF | ... | AND | Set up performance test suite with Dynamic SRv6 proxy -| ... | Suite Teardown | Tear down 3-node performance topology | ... | Test Setup | Set up performance test -| ... | Test Teardown | Run Keywords | ... | Tear down performance test with SRv6 with encapsulation -| ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... | AND | Tear down performance test with container | ... | Test Template | Local Template @@ -45,13 +42,12 @@ | ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\ | ... | routing and static route, SR policy and steering policy for one\ | ... | direction and one SR behaviour (function) - End.AD - for other\ -| ... | direction. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic\ -| ... | by Intel. +| ... | direction. DUT1 and DUT2 are tested with ${nic_name}.\ | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ | ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ | ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ | ... | Test packets are generated by TG on\ | ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ | ... | (flow-group per direction, 253 flows per flow-group) with\ @@ -61,8 +57,9 @@ | ... | draft 3 and Segment Routing for Service Chaining - internet draft 01. *** Variables *** -# X520-DA2 bandwidth limit -| ${s_limit}= | ${10000000000} +| ${nic_name}= | Intel-X710 +# outer IPv6 header + SRH with 3 SIDs: 40+(8+3*16)B +| ${overhead}= | ${96} # SIDs | ${dut1_sid1}= | 2002:1:: | ${dut1_sid2}= | 2003:2:: @@ -91,8 +88,6 @@ | ${dut2-memif-1-if2_ip6}= | 3002:1::2 | ${dut2_nh}= | 4001:: | ${prefix}= | ${64} -# outer IPv6 header + SRH with 3 SIDs: 40+(8+3*16)B -| ${srv6_overhead_3sids}= | ${96} # Traffic profile: | ${traffic_profile}= | trex-sl-3n-ethip6-ip6src253 # Container @@ -106,74 +101,71 @@ | | ... | routing and static route, SR policy and steering policy for one\ | | ... | direction and one SR behaviour (function) - End - for other direction. | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ | | ... | | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). | | ... | Type: integer, string | | ... | - phy_cores - Number of physical cores. Type: integer | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer | | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} | | ... -| | Set Test Variable | ${framesize} -| | Set Test Variable | ${min_rate} | ${10000} +| | Set Test Variable | \${frame_size} | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_limit} | ${framesize} | overhead=${srv6_overhead_3sids} +| | Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | And Set up performance test with containers | nf_chains=${1} | nf_nodes=${1} | | When Initialize IPv6 forwarding over SRv6 with endpoint to SR-unaware Service Function via 'dynamic_proxy' behaviour in 3-node circular topology | | Then Find NDR and PDR intervals using optimized search -| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} *** Test Cases *** | tc01-78B-1c-ethip6srhip6-ip6base-srv6proxy-dyn-ndrpdr | | [Tags] | 78B | 1C -| | framesize=${78} | phy_cores=${1} +| | frame_size=${78} | phy_cores=${1} | tc02-78B-2c-ethip6srhip6-ip6base-srv6proxy-dyn-ndrpdr | | [Tags] | 78B | 2C -| | framesize=${78} | phy_cores=${2} +| | frame_size=${78} | phy_cores=${2} | tc03-78B-4c-ethip6srhip6-ip6base-srv6proxy-dyn-ndrpdr | | [Tags] | 78B | 4C -| | framesize=${78} | phy_cores=${4} +| | frame_size=${78} | phy_cores=${4} | tc04-1518B-1c-ethip6srhip6-ip6base-srv6proxy-dyn-ndrpdr | | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} +| | frame_size=${1518} | phy_cores=${1} | tc05-1518B-2c-ethip6srhip6-ip6base-srv6proxy-dyn-ndrpdr | | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} +| | frame_size=${1518} | phy_cores=${2} | tc06-1518B-4c-ethip6srhip6-ip6base-srv6proxy-dyn-ndrpdr | | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} +| | frame_size=${1518} | phy_cores=${4} | tc07-9000B-1c-ethip6srhip6-ip6base-srv6proxy-dyn-ndrpdr | | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} +| | frame_size=${9000} | phy_cores=${1} | tc08-9000B-2c-ethip6srhip6-ip6base-srv6proxy-dyn-ndrpdr | | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} +| | frame_size=${9000} | phy_cores=${2} | tc09-9000B-4c-ethip6srhip6-ip6base-srv6proxy-dyn-ndrpdr | | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} +| | frame_size=${9000} | phy_cores=${4} | tc10-IMIX-1c-ethip6srhip6-ip6base-srv6proxy-dyn-ndrpdr | | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} +| | frame_size=IMIX_v4_1 | phy_cores=${1} | tc11-IMIX-2c-ethip6srhip6-ip6base-srv6proxy-dyn-ndrpdr | | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} +| | frame_size=IMIX_v4_1 | phy_cores=${2} | tc12-IMIX-4c-ethip6srhip6-ip6base-srv6proxy-dyn-ndrpdr | | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdr.robot b/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdr.robot index 7ad3a7a9df..43d5785a21 100644 --- a/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdr.robot +++ b/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2018 Cisco and/or its affiliates. +# Copyright (c) 2019 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -15,22 +15,19 @@ | Resource | resources/libraries/robot/performance/performance_setup.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X520-DA2 | SRv6 | IP6FWD | FEATURE | SRv6_PROXY +| ... | NIC_Intel-X710 | SRv6 | IP6FWD | FEATURE | SRv6_PROXY | ... | SRv6_PROXY_MASQ | MEMIF | LXC | ... | Suite Setup | Run Keywords | ... | Set up 3-node performance topology with DUT's NIC model | L3 -| ... | Intel-X520-DA2 +| ... | ${nic_name} | ... | AND | Set up performance test suite with MEMIF | ... | AND | Set up performance test suite with Masquerading SRv6 proxy -| ... | Suite Teardown | Tear down 3-node performance topology | ... | Test Setup | Set up performance test -| ... | Test Teardown | Run Keywords | ... | Tear down performance test with SRv6 with encapsulation -| ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... | AND | Tear down performance test with container | ... | Test Template | Local Template @@ -45,13 +42,12 @@ | ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\ | ... | routing and static route, SR policy and steering policy for one\ | ... | direction and one SR behaviour (function) - End.AM - for other\ -| ... | direction. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic\ -| ... | by Intel. +| ... | direction. DUT1 and DUT2 are tested with ${nic_name}.\ | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ | ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ | ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ | ... | Test packets are generated by TG on\ | ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ | ... | (flow-group per direction, 253 flows per flow-group) with\ @@ -61,8 +57,9 @@ | ... | draft 3 and Segment Routing for Service Chaining - internet draft 01. *** Variables *** -# X520-DA2 bandwidth limit -| ${s_limit}= | ${10000000000} +| ${nic_name}= | Intel-X710 +# outer IPv6 header + SRH with 3 SIDs: 40+(8+3*16)B +| ${overhead}= | ${96} # SIDs | ${dut1_sid1}= | 2002:1:: | ${dut1_sid2}= | 2003:2:: @@ -91,8 +88,6 @@ | ${dut2-memif-1-if2_ip6}= | 3002:1::2 | ${dut2_nh}= | 4001:: | ${prefix}= | ${64} -# outer IPv6 header + SRH with 3 SIDs: 40+(8+3*16)B -| ${srv6_overhead_3sids}= | ${96} # Traffic profile: | ${traffic_profile}= | trex-sl-3n-ethip6-ip6src253 # Container @@ -106,74 +101,71 @@ | | ... | routing and static route, SR policy and steering policy for one\ | | ... | direction and one SR behaviour (function) - End - for other direction. | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ | | ... | | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). | | ... | Type: integer, string | | ... | - phy_cores - Number of physical cores. Type: integer | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer | | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} | | ... -| | Set Test Variable | ${framesize} -| | Set Test Variable | ${min_rate} | ${10000} +| | Set Test Variable | \${frame_size} | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_limit} | ${framesize} | overhead=${srv6_overhead_3sids} +| | Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | And Set up performance test with containers | nf_chains=${1} | nf_nodes=${1} | | When Initialize IPv6 forwarding over SRv6 with endpoint to SR-unaware Service Function via 'masquerading' behaviour in 3-node circular topology | | Then Find NDR and PDR intervals using optimized search -| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} *** Test Cases *** | tc01-78B-1c-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdr | | [Tags] | 78B | 1C -| | framesize=${78} | phy_cores=${1} +| | frame_size=${78} | phy_cores=${1} | tc02-78B-2c-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdr | | [Tags] | 78B | 2C -| | framesize=${78} | phy_cores=${2} +| | frame_size=${78} | phy_cores=${2} | tc03-78B-4c-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdr | | [Tags] | 78B | 4C -| | framesize=${78} | phy_cores=${4} +| | frame_size=${78} | phy_cores=${4} | tc04-1518B-1c-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdr | | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} +| | frame_size=${1518} | phy_cores=${1} | tc05-1518B-2c-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdr | | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} +| | frame_size=${1518} | phy_cores=${2} | tc06-1518B-4c-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdr | | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} +| | frame_size=${1518} | phy_cores=${4} | tc07-9000B-1c-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdr | | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} +| | frame_size=${9000} | phy_cores=${1} | tc08-9000B-2c-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdr | | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} +| | frame_size=${9000} | phy_cores=${2} | tc09-9000B-4c-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdr | | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} +| | frame_size=${9000} | phy_cores=${4} | tc10-IMIX-1c-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdr | | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} +| | frame_size=IMIX_v4_1 | phy_cores=${1} | tc11-IMIX-2c-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdr | | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} +| | frame_size=IMIX_v4_1 | phy_cores=${2} | tc12-IMIX-4c-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdr | | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-stat-ndrpdr.robot b/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-stat-ndrpdr.robot index c0953e0c85..3997f7e267 100644 --- a/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-stat-ndrpdr.robot +++ b/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-stat-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2018 Cisco and/or its affiliates. +# Copyright (c) 2019 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -15,22 +15,19 @@ | Resource | resources/libraries/robot/performance/performance_setup.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X520-DA2 | SRv6 | IP6FWD | FEATURE | SRv6_PROXY +| ... | NIC_Intel-X710 | SRv6 | IP6FWD | FEATURE | SRv6_PROXY | ... | SRv6_PROXY_STAT | MEMIF | LXC | ... | Suite Setup | Run Keywords | ... | Set up 3-node performance topology with DUT's NIC model | L3 -| ... | Intel-X520-DA2 +| ... | ${nic_name} | ... | AND | Set up performance test suite with MEMIF | ... | AND | Set up performance test suite with Static SRv6 proxy -| ... | Suite Teardown | Tear down 3-node performance topology | ... | Test Setup | Set up performance test -| ... | Test Teardown | Run Keywords | ... | Tear down performance test with SRv6 with encapsulation -| ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... | AND | Tear down performance test with container | ... | Test Template | Local Template @@ -45,13 +42,12 @@ | ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\ | ... | routing and static route, SR policy and steering policy for one\ | ... | direction and one SR behaviour (function) - End.AS - for other\ -| ... | direction. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic\ -| ... | by Intel. +| ... | direction. DUT1 and DUT2 are tested with ${nic_name}.\ | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ | ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ | ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ | ... | Test packets are generated by TG on\ | ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ | ... | (flow-group per direction, 253 flows per flow-group) with\ @@ -61,8 +57,9 @@ | ... | draft 3 and Segment Routing for Service Chaining - internet draft 01. *** Variables *** -# X520-DA2 bandwidth limit -| ${s_limit}= | ${10000000000} +| ${nic_name}= | Intel-X710 +# outer IPv6 header + SRH with 3 SIDs: 40+(8+3*16)B +| ${overhead}= | ${96} # SIDs | ${dut1_sid1}= | 2002:1:: | ${dut1_sid2}= | 2003:2:: @@ -91,8 +88,6 @@ | ${dut2-memif-1-if2_ip6}= | 3002:1::2 | ${dut2_nh}= | 4001:: | ${prefix}= | ${64} -# outer IPv6 header + SRH with 3 SIDs: 40+(8+3*16)B -| ${srv6_overhead_3sids}= | ${96} # Traffic profile: | ${traffic_profile}= | trex-sl-3n-ethip6-ip6src253 # Container @@ -106,74 +101,71 @@ | | ... | routing and static route, SR policy and steering policy for one\ | | ... | direction and one SR behaviour (function) - End - for other direction. | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ | | ... | | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). | | ... | Type: integer, string | | ... | - phy_cores - Number of physical cores. Type: integer | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer | | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} | | ... -| | Set Test Variable | ${framesize} -| | Set Test Variable | ${min_rate} | ${10000} +| | Set Test Variable | \${frame_size} | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_limit} | ${framesize} | overhead=${srv6_overhead_3sids} +| | Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | And Set up performance test with containers | nf_chains=${1} | nf_nodes=${1} | | When Initialize IPv6 forwarding over SRv6 with endpoint to SR-unaware Service Function via 'static_proxy' behaviour in 3-node circular topology | | Then Find NDR and PDR intervals using optimized search -| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} *** Test Cases *** | tc01-78B-1c-ethip6srhip6-ip6base-srv6proxy-stat-ndrpdr | | [Tags] | 78B | 1C -| | framesize=${78} | phy_cores=${1} +| | frame_size=${78} | phy_cores=${1} | tc02-78B-2c-ethip6srhip6-ip6base-srv6proxy-stat-ndrpdr | | [Tags] | 78B | 2C -| | framesize=${78} | phy_cores=${2} +| | frame_size=${78} | phy_cores=${2} | tc03-78B-4c-ethip6srhip6-ip6base-srv6proxy-stat-ndrpdr | | [Tags] | 78B | 4C -| | framesize=${78} | phy_cores=${4} +| | frame_size=${78} | phy_cores=${4} | tc04-1518B-1c-ethip6srhip6-ip6base-srv6proxy-stat-ndrpdr | | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} +| | frame_size=${1518} | phy_cores=${1} | tc05-1518B-2c-ethip6srhip6-ip6base-srv6proxy-stat-ndrpdr | | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} +| | frame_size=${1518} | phy_cores=${2} | tc06-1518B-4c-ethip6srhip6-ip6base-srv6proxy-stat-ndrpdr | | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} +| | frame_size=${1518} | phy_cores=${4} | tc07-9000B-1c-ethip6srhip6-ip6base-srv6proxy-stat-ndrpdr | | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} +| | frame_size=${9000} | phy_cores=${1} | tc08-9000B-2c-ethip6srhip6-ip6base-srv6proxy-stat-ndrpdr | | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} +| | frame_size=${9000} | phy_cores=${2} | tc09-9000B-4c-ethip6srhip6-ip6base-srv6proxy-stat-ndrpdr | | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} +| | frame_size=${9000} | phy_cores=${4} | tc10-IMIX-1c-ethip6srhip6-ip6base-srv6proxy-stat-ndrpdr | | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} +| | frame_size=IMIX_v4_1 | phy_cores=${1} | tc11-IMIX-2c-ethip6srhip6-ip6base-srv6proxy-stat-ndrpdr | | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} +| | frame_size=IMIX_v4_1 | phy_cores=${2} | tc12-IMIX-4c-ethip6srhip6-ip6base-srv6proxy-stat-ndrpdr | | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/srv6/regenerate_testcases.py b/tests/vpp/perf/srv6/regenerate_testcases.py index d98546b14d..5e32e97fce 100755 --- a/tests/vpp/perf/srv6/regenerate_testcases.py +++ b/tests/vpp/perf/srv6/regenerate_testcases.py @@ -1,6 +1,6 @@ #!/usr/bin/env python -# Copyright (c) 2018 Cisco and/or its affiliates. +# Copyright (c) 2019 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: |