diff options
Diffstat (limited to 'tests/vpp/perf/vm_vhost/10ge2p1x520-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr.robot')
-rw-r--r-- | tests/vpp/perf/vm_vhost/10ge2p1x520-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr.robot | 151 |
1 files changed, 0 insertions, 151 deletions
diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr.robot deleted file mode 100644 index 52041b0cba..0000000000 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr.robot +++ /dev/null @@ -1,151 +0,0 @@ -# Copyright (c) 2018 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR -| ... | NIC_Intel-X520-DA2 | DOT1Q | L2XCFWD | BASE | VHOST | 1VM -| ... | VHOST_1024 | LBOND | LBOND_DPDK | LBOND_MODE_XOR | LBOND_LB_L34 -| ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L2 | Intel-X520-DA2 -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| Test Teardown | Tear down performance mrr test with vhost and VM with dpdk-testpmd -| ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} -| ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs} -| ... -| Test Template | Local Template -| ... -| Documentation | *Raw results L2XC test cases with vhost and dpdk link bonding* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. 802.1q -| ... | tagging is applied on link between DUT1 and DUT2. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with DPDK -| ... | link bonding (mode XOR, transmit policy l34) on link between DUT1 and -| ... | DUT2 and L2 cross- connect. Qemu Guest is connected to VPP via -| ... | vhost-user interfaces. Guest is running DPDK testpmd interconnecting -| ... | vhost-user interfaces using 5 cores pinned to cpus 5-9 and 2048M memory. -| ... | Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores (1 main -| ... | core and 4 cores dedicated for io), forwarding mode is set to io, -| ... | rxd/txd=1024, burst=64. DUT1, DUT2 are tested with 2p10GE NIC X520 -| ... | Niantic by Intel. -| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic -| ... | at line rate and reports total received/sent packets over trial period. -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC -| ... | addresses of the TG node interfaces. - -*** Variables *** -| ${dut1_eth_bond_if1}= | eth_bond1 -| ${dut1_eth_bond_if1_name}= | BondEthernet0 -| ${dut2_eth_bond_if1}= | eth_bond1 -| ${dut2_eth_bond_if1_name}= | BondEthernet0 -| ${subid}= | 10 -| ${tag_rewrite}= | pop-1 -| ${overhead}= | ${4} -# X520-DA2 bandwidth limit -| ${s_limit}= | ${10000000000} -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ -| | ... | trial throughput test. -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | ${dut1_vm_refs}= | Create Dictionary -| | ${dut2_vm_refs}= | Create Dictionary -| | Set Test Variable | ${dut1_vm_refs} -| | Set Test Variable | ${dut2_vm_refs} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | And Add VLAN Strip Offload switch off between DUTs in 3-node single link topology -| | And Add DPDK bonded Ethernet interfaces to DUTs in 3-node single link topology -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_limit} | ${framesize} | overhead=${overhead} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize L2 xconnect with Vhost-User and VLAN with DPDK link bonding in 3-node circular topology -| | ... | ${subid} | ${tag_rewrite} -| | And Configure guest VMs with dpdk-testpmd connected via vhost-user -| | ... | vm_count=${1} | jumbo=${jumbo} | perf_qemu_qsz=${1024} -| | ... | use_tuned_cfs=${False} -| | Then Traffic should pass with maximum rate -| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} - -*** Test Cases *** -| tc01-64B-1c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} |