diff options
Diffstat (limited to 'tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdrdisc.robot')
| -rw-r--r-- | tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdrdisc.robot | 430 |
1 files changed, 430 insertions, 0 deletions
diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdrdisc.robot new file mode 100644 index 0000000000..859b74d008 --- /dev/null +++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdrdisc.robot @@ -0,0 +1,430 @@ +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| Library | resources.libraries.python.QemuUtils +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC +| ... | NIC_Intel-X710 | DOT1Q | L2XCFWD | BASE | VHOST | VM +| ... | VHOST_1024 | LBOND | LBOND_VPP| LBOND_MODE_LACP | LBOND_LB_L34 +| ... +| Suite Setup | Run Keywords +| ... | Set up 3-node performance topology with DUT's NIC model | L2 +| ... | Intel-X520-DA2 +| ... | AND | Set up performance test suite with LACP mode link bonding +| ... +| Suite Teardown | Tear down 3-node performance topology +| ... +| Test Setup | Set up performance test +| Test Teardown | Tear down performance test with vhost and VM with dpdk-testpmd +| ... | ${min_rate}pps | ${framesize} | ${traffic_profile} +| ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} +| ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs} +| ... +| Documentation | *RFC2544: Packet throughput L2XC test cases with vhost and +| ... | vpp link bonding* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. 802.1q +| ... | tagging is applied on link between DUT1 and DUT2. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with VPP +| ... | link bonding (mode LACP, transmit policy l34) on link between DUT1 and +| ... | DUT2 and L2 cross- connect. Qemu Guest is connected to VPP via +| ... | vhost-user interfaces. Guest is running DPDK testpmd interconnecting +| ... | vhost-user interfaces using 5 cores pinned to cpus 5-9 and 2048M memory. +| ... | Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores (1 main +| ... | core and 4 cores dedicated for io), forwarding mode is set to io, +| ... | rxd/txd=1024, burst=64. DUT1, DUT2 are tested with 2p10GE NIC X710 +| ... | Fortville by Intel. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop +| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage +| ... | of packets transmitted. NDR and PDR are discovered for different +| ... | Ethernet L2 frame sizes using either binary search or linear search +| ... | algorithms with configured starting rate and final step that determines +| ... | throughput measurement resolution. Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, 253 flows per flow-group) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static +| ... | payload. MAC addresses are matching MAC addresses of the TG node +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +| ${perf_qemu_qsz}= | 1024 +| ${subid}= | 10 +| ${tag_rewrite}= | pop-1 +| ${vlan_overhead}= | ${4} +# Link bonding config +| ${bond_mode}= | lacp +| ${lb_mode}= | l34 +# X710 bandwidth limit +| ${s_limit} | ${10000000000} +# Socket names +| ${bd_id1}= | 1 +| ${bd_id2}= | 2 +| ${sock1}= | /tmp/sock-1-${bd_id1} +| ${sock2}= | /tmp/sock-1-${bd_id2} +# Traffic profile: +| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 + +*** Keywords *** +| Discover NDR or PDR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with ${wt} thread, ${wt} phy\ +| | ... | core, ${rxq} receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | trial throughput test. +| | ... +| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| | ... +| | # Test Variables required for test and test teardown +| | Set Test Variable | ${framesize} +| | Set Test Variable | ${min_rate} +| | ${get_framesize}= | Get Frame Size | ${framesize} +| | ${max_rate}= | Calculate pps | ${s_limit} +| | ... | ${get_framesize + ${vlan_overhead}} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | ${dut1_vm_refs}= | Create Dictionary +| | ${dut2_vm_refs}= | Create Dictionary +| | Set Test Variable | ${dut1_vm_refs} +| | Set Test Variable | ${dut2_vm_refs} +| | ${jumbo_frames}= | Set Variable If +| | ... | ${get_framesize + ${vlan_overhead}} < ${1522} | ${False} | ${True} +| | ... +| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | And Add PCI devices to DUTs in 3-node single link topology +| | And Add VLAN Strip Offload switch off between DUTs in 3-node single link topology +| | And Run Keyword If | ${get_framesize + ${vlan_overhead}} < ${1522} +| | ... | Add no multi seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When Initialize L2 xconnect with Vhost-User and VLAN with VPP link bonding in 3-node circular topology +| | ... | ${sock1} | ${sock2} | ${subid} | ${tag_rewrite} | ${bond_mode} +| | ... | ${lb_mode} +| | ${vm1}= | And Configure guest VM with dpdk-testpmd connected via vhost-user +| | ... | ${dut1} | ${sock1} | ${sock2} | DUT1_VM1 +| | ... | jumbo_frames=${jumbo_frames} +| | And Set To Dictionary | ${dut1_vm_refs} | DUT1_VM1 | ${vm1} +| | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user +| | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1 +| | ... | jumbo_frames=${jumbo_frames} +| | And Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2} +| | And All Vpp Interfaces Ready Wait | ${nodes} +| | Then Run Keyword If | '${search_type}' == 'NDR' +| | ... | Find NDR using binary search and pps +| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile} +| | ... | ${min_rate} | ${max_rate} | ${threshold} +| | ... | ELSE IF | '${search_type}' == 'PDR' +| | ... | Find PDR using binary search and pps +| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile} +| | ... | ${min_rate} | ${max_rate} | ${threshold} +| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} + +*** Test Cases *** +| tc01-64B-1t1c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 10kpps. +| | ... +| | [Tags] | 64B | 1T1C | STHREAD | NDRDISC | TEST +| | ... +| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm +| | wt=1 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=NDR + +| tc02-64B-1t1c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 10kpps, LT=0.5%. +| | ... +| | [Tags] | 64B | 1T1C | STHREAD | PDRDISC | SKIP_PATCH +| | ... +| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm +| | wt=1 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=PDR + +| tc03-1518B-1t1c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 10kpps. +| | ... +| | [Tags] | 1518B | 1T1C | STHREAD | NDRDISC +| | ... +| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm +| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=NDR + +| tc04-1518B-1t1c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 10kpps, LT=0.5%. +| | ... +| | [Tags] | 1518B | 1T1C | STHREAD | PDRDISC | SKIP_PATCH +| | ... +| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm +| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=PDR + +| tc05-9000B-1t1c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 10kpps. +| | ... +| | [Tags] | 9000B | 1T1C | STHREAD | NDRDISC +| | ... +| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm +| | wt=1 | rxq=1 | framesize=${9000} | min_rate=${10000} | search_type=NDR + +| tc06-9000B-1t1c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 10kpps, LT=0.5%. +| | ... +| | [Tags] | 9000B | 1T1C | STHREAD | PDRDISC | SKIP_PATCH +| | ... +| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm +| | wt=1 | rxq=1 | framesize=${9000} | min_rate=${10000} | search_type=PDR + +| tc07-IMIX-1t1c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Find NDR for IMIX_v4_1 framesize using binary search start at\ +| | ... | 10GE linerate, step 10kpps. +| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) +| | ... +| | [Tags] | IMIX | 1T1C | STHREAD | NDRDISC +| | ... +| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm +| | wt=1 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR + +| tc08-IMIX-1t1c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Find PDR for IMIX_v4_1 framesize using binary search start at\ +| | ... | 10GE linerate, step 10kpps, LT=0.5%. +| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) +| | ... +| | [Tags] | IMIX | 1T1C | STHREAD | PDRDISC | SKIP_PATCH +| | ... +| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm +| | wt=1 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR + +| tc09-64B-2t2c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 10kpps. +| | ... +| | [Tags] | 64B | 2T2C | STHREAD | NDRDISC +| | ... +| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm +| | wt=2 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=NDR + +| tc10-64B-2t2c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 10kpps, LT=0.5%. +| | ... +| | [Tags] | 64B | 2T2C | STHREAD | PDRDISC | SKIP_PATCH +| | ... +| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm +| | wt=2 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=PDR + +| tc11-1518B-2t2c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 10kpps. +| | ... +| | [Tags] | 1518B | 2T2C | STHREAD | NDRDISC | SKIP_PATCH +| | ... +| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm +| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=NDR + +| tc12-1518B-2t2c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 10kpps, LT=0.5%. +| | ... +| | [Tags] | 1518B | 2T2C | STHREAD | PDRDISC | SKIP_PATCH +| | ... +| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm +| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=PDR + +| tc13-9000B-2t2c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 10kpps. +| | ... +| | [Tags] | 9000B | 2T2C | STHREAD | NDRDISC | SKIP_PATCH +| | ... +| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm +| | wt=2 | rxq=1 | framesize=${9000} | min_rate=${10000} | search_type=NDR + +| tc14-9000B-2t2c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 10kpps, LT=0.5%. +| | ... +| | [Tags] | 9000B | 2T2C | STHREAD | PDRDISC | SKIP_PATCH +| | ... +| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm +| | wt=2 | rxq=1 | framesize=${9000} | min_rate=${10000} | search_type=PDR + +| tc15-IMIX-2t2c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Find NDR for IMIX_v4_1 framesize using binary search start at\ +| | ... | 10GE linerate, step 10kpps. +| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) +| | ... +| | [Tags] | IMIX | 2T2C | STHREAD | NDRDISC | SKIP_PATCH +| | ... +| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm +| | wt=2 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR + +| tc16-IMIX-2t2c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Find PDR for IMIX_v4_1 framesize using binary search start at\ +| | ... | 10GE linerate, step 10kpps. +| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) +| | ... +| | [Tags] | IMIX | 2T2C | STHREAD | PDRDISC | SKIP_PATCH +| | ... +| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm +| | wt=2 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR + +| tc17-64B-4t4c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores,\ +| | ... | 2 receive queues per NIC port. +| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 10kpps. +| | ... +| | [Tags] | 64B | 4T4C | STHREAD | NDRDISC +| | ... +| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm +| | wt=4 | rxq=2 | framesize=${64} | min_rate=${10000} | search_type=NDR + +| tc18-64B-4t4c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores,\ +| | ... | 2 receive queues per NIC port. +| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 10kpps, LT=0.5%. +| | ... +| | [Tags] | 64B | 4T4C | STHREAD | PDRDISC | SKIP_PATCH +| | ... +| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm +| | wt=4 | rxq=2 | framesize=${64} | min_rate=${10000} | search_type=PDR + +| tc19-1518B-4t4c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores,\ +| | ... | 2 receive queues per NIC port. +| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 10kpps. +| | ... +| | [Tags] | 1518B | 4T4C | STHREAD | NDRDISC | SKIP_PATCH +| | ... +| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm +| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${10000} | search_type=NDR + +| tc20-1518B-4t4c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores,\ +| | ... | 2 receive queues per NIC port. +| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 10kpps, LT=0.5%. +| | ... +| | [Tags] | 1518B | 4T4C | STHREAD | PDRDISC | SKIP_PATCH +| | ... +| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm +| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${10000} | search_type=PDR + +| tc21-9000B-4t4c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores,\ +| | ... | 2 receive queues per NIC port. +| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 10kpps. +| | ... +| | [Tags] | 9000B | 4T4C | STHREAD | NDRDISC | SKIP_PATCH +| | ... +| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm +| | wt=4 | rxq=2 | framesize=${9000} | min_rate=${10000} | search_type=NDR + +| tc22-9000B-4t4c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores,\ +| | ... | 2 receive queues per NIC port. +| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 10kpps, LT=0.5%. +| | ... +| | [Tags] | 9000B | 4T4C | STHREAD | PDRDISC | SKIP_PATCH +| | ... +| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm +| | wt=4 | rxq=2 | framesize=${9000} | min_rate=${10000} | search_type=PDR + +| tc23-IMIX-4t4c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores,\ +| | ... | 2 receive queues per NIC port. +| | ... | [Ver] Find NDR for IMIX_v4_1 framesize using binary search start at\ +| | ... | 10GE linerate, step 10kpps. +| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) +| | ... +| | [Tags] | IMIX | 4T4C | STHREAD | NDRDISC | SKIP_PATCH +| | ... +| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm +| | wt=4 | rxq=2 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR + +| tc24-IMIX-4t4c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores,\ +| | ... | 2 receive queues per NIC port. +| | ... | [Ver] Find PDR for IMIX_v4_1 framesize using binary search start at\ +| | ... | 10GE linerate, step 10kpps, LT=0.5%. +| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) +| | ... +| | [Tags] | IMIX | 4T4C | STHREAD | PDRDISC | SKIP_PATCH +| | ... +| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm +| | wt=4 | rxq=2 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR |