diff options
Diffstat (limited to 'tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot')
| -rw-r--r-- | tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot | 140 |
1 files changed, 140 insertions, 0 deletions
diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot new file mode 100644 index 0000000000..c82e67e679 --- /dev/null +++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot @@ -0,0 +1,140 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X710 | DOT1Q | L2XCFWD | BASE | VHOST | 1VM | VHOST_1024 +| ... | NF_VPPL2XC +| ... +| Suite Setup | Setup suite single link | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test +| Test Teardown | Tear down test | performance | vhost +| ... +| Test Template | Local Template +| ... +| Documentation | *RFC2544: Pkt throughput L2XC test cases with vhost* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. 802.1q +| ... | tagging is applied on link between DUT1 and DUT2. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross- +| ... | connect. Qemu VNFs are \ +| ... | connected to VPP via vhost-user interfaces. Guest is running VPP l2xc \ +| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is \ +| ... | tested with ${nic_name}. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per +| ... | flow-group) with all packets containing Ethernet header, IPv4 header +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| ... | addresses of the TG node interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L2 +| ${nic_name}= | Intel-X710 +| ${overhead}= | ${4} +| ${subid}= | 10 +| ${tag_rewrite}= | pop-1 +| ${nf_dtcr}= | ${1} +| ${nf_dtc}= | ${1} +| ${nf_chains}= | ${1} +| ${nf_nodes}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | And Set Max Rate And Jumbo And Handle Multi Seg +| | And Apply startup configuration on all VPP DUTs +| | When Initialize L2 xconnect with Vhost-User and VLAN in 3-node circular topology +| | ... | ${subid} | ${tag_rewrite} +| | And Configure chains of NFs connected via vhost-user +| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | jumbo=${jumbo} +| | ... | use_tuned_cfs=${False} | auto_scale=${True} | vnf=vpp_chain_l2xc +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| tc01-64B-1c-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| tc02-64B-2c-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| tc03-64B-4c-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| tc04-1518B-1c-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| tc05-1518B-2c-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| tc06-1518B-4c-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| tc07-9000B-1c-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| tc08-9000B-2c-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| tc09-9000B-4c-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} |