diff options
Diffstat (limited to 'tests/vpp/perf/vm_vhost/2n-10ge2p1x710-eth-l2bd-32vhost-2chain-16vm-vppip4-mrr.robot')
| -rw-r--r-- | tests/vpp/perf/vm_vhost/2n-10ge2p1x710-eth-l2bd-32vhost-2chain-16vm-vppip4-mrr.robot | 116 |
1 files changed, 116 insertions, 0 deletions
diff --git a/tests/vpp/perf/vm_vhost/2n-10ge2p1x710-eth-l2bd-32vhost-2chain-16vm-vppip4-mrr.robot b/tests/vpp/perf/vm_vhost/2n-10ge2p1x710-eth-l2bd-32vhost-2chain-16vm-vppip4-mrr.robot new file mode 100644 index 0000000000..b8a36c3fe3 --- /dev/null +++ b/tests/vpp/perf/vm_vhost/2n-10ge2p1x710-eth-l2bd-32vhost-2chain-16vm-vppip4-mrr.robot @@ -0,0 +1,116 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR +| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM +| ... | VHOST_1024 | NF_DENSITY | NF_VPPIP4 | CHAIN | 2R8C +| ... +| Suite Setup | Set up 2-node performance topology with DUT's NIC model +| ... | L3 | Intel-X710 +| Suite Teardown | Tear down 2-node performance topology +| ... +| Test Setup | Set up performance test +| Test Teardown | Tear down performance mrr test with vhost +| ... +| Test Template | Local Template +| ... +| Documentation | *Raw results L2BD test cases with 32 vhost 2 chains 16 VMs* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge- +| ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via +| ... | vhost-user interfaces. Guest is running VPP IPv4 +| ... | interconnecting vhost-user interfaces, forwarding mode is +| ... | set to io, rxd/txd=1024. DUT1 is tested with 2p10GE NIC X710 by Intel. +| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic +| ... | at line rate and reports total received/sent packets over trial period. +| ... | Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, 254 flows per flow-group) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static +| ... | payload. MAC addresses are matching MAC addresses of NFs nodes +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +# X710 bandwidth limit +| ${s_limit}= | ${10000000000} +# Traffic profile: +| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-2c8n + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ +| | ... | trial throughput test. +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg +| | ... | ${s_limit} | ${framesize} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize L2 bridge domains for multiple chains with Vhost-User +| | ... | nf_chains=${2} | nf_nodes=${8} +| | And Configure chains of NFs connected via vhost-user +| | ... | nf_chains=${2} | nf_nodes=${8} | jumbo=${jumbo} +| | ... | use_tuned_cfs=${False} | auto_scale=${False} | vnf=vpp_chain_ip4 +| | Then Traffic should pass with maximum rate +| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} + +*** Test Cases *** +| tc01-64B-1c-eth-l2bd-32vhost-2chain-16vm-vppip4-mrr +| | [Tags] | 64B | 1C +| | framesize=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-l2bd-32vhost-2chain-16vm-vppip4-mrr +| | [Tags] | 64B | 2C +| | framesize=${64} | phy_cores=${2} + +| tc04-1518B-1c-eth-l2bd-32vhost-2chain-16vm-vppip4-mrr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-l2bd-32vhost-2chain-16vm-vppip4-mrr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} + +| tc07-9000B-1c-eth-l2bd-32vhost-2chain-16vm-vppip4-mrr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-l2bd-32vhost-2chain-16vm-vppip4-mrr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} + +| tc10-IMIX-1c-eth-l2bd-32vhost-2chain-16vm-vppip4-mrr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-l2bd-32vhost-2chain-16vm-vppip4-mrr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} |