diff options
Diffstat (limited to 'tests/vpp/perf/vm_vhost')
4 files changed, 0 insertions, 660 deletions
diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-2lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-2lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot deleted file mode 100644 index 4889a6754a..0000000000 --- a/tests/vpp/perf/vm_vhost/10ge2p1x710-2lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot +++ /dev/null @@ -1,166 +0,0 @@ -# Copyright (c) 2023 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| -| Force Tags | 3_NODE_DOUBLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X710 | DOT1Q | L2BDMACLRN | BASE | VHOST | 1VM -| ... | VHOST_1024 | LBOND | LBOND_VPP | LBOND_MODE_LACP | LBOND_LB_L34 -| ... | LBOND_2L | VM_TESTPMD | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | 2lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| -| Suite Setup | Setup suite topology interfaces | performance -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | vhost -| -| Test Template | Local Template -| -| Documentation | **RFC2544: Pkt throughput L2BD test cases with vhost and vpp \ -| ... | link bonding** -| ... | -| ... | - **[Top] Network Topologies:** TG-DUT1=DUT2-TG 3-node circular \ -| ... | topology with single links between TG and DUT nodes and double link \ -| ... | between DUT nodes. -| ... | -| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. \ -| ... | 802.1q tagging is applied on link between DUT1 and DUT2. -| ... | -| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with VPP \ -| ... | link bonding (mode LACP, transmit policy l34) on link between DUT1 and \ -| ... | DUT2 and L2 bridge-domain with MAC learning enabled. Qemu VNFs are \ -| ... | connected to VPP via vhost-user interfaces. Guest is running testpmd \ -| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is \ -| ... | tested with ${nic_name}. -| ... | -| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ -| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ -| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ -| ... | expressed in percentage of packets transmitted. NDR and PDR are \ -| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ -| ... | library. -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ -| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ -| ... | addresses of the TG node interfaces. -| ... | -| ... | - **[Ref] Applicable standard specifications:** RFC2544. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | lacp_plugin.so -| ... | vhost_plugin.so -| ${crypto_type}= | ${None} -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 4 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L2 -| ${overhead}= | ${4} -| ${subid}= | 10 -| ${tag_rewrite}= | pop-1 -| ${nf_dtcr}= | ${1} -| ${nf_dtc}= | ${1} -| ${nf_chains}= | ${1} -| ${nf_nodes}= | ${1} -# Link bonding config -| ${bond_mode}= | lacp -| ${lb_mode}= | l34 -| ${bd_id1}= | 1 -| ${bd_id2}= | 2 -# Traffic profile: -| ${traffic_profile}= | trex-stl-ethip4-ip4src254 - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | - **[Cfg]** DUT runs L2BD switching config. \ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | Set Test Variable | ${vlan_strip_off} | ${TRUE} -| | -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize L2 bridge domains with Vhost-User and VLAN with VPP link bonding in a 3-node circular topology -| | ... | ${bd_id1} | ${bd_id2} | ${subid} -| | ... | ${tag_rewrite} | ${bond_mode} | ${lb_mode} -| | And Configure chains of NFs connected via vhost-user -| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | jumbo=${jumbo} -| | ... | use_tuned_cfs=${False} | auto_scale=${True} | vnf=testpmd_io -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| 64B-1c-2lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| 64B-2c-2lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| 64B-4c-2lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| 1518B-1c-2lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-2lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-2lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-2lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-2lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-2lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-2lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-2lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-2lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-2lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-2lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot deleted file mode 100644 index b12c045548..0000000000 --- a/tests/vpp/perf/vm_vhost/10ge2p1x710-2lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot +++ /dev/null @@ -1,167 +0,0 @@ -# Copyright (c) 2023 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| -| Force Tags | 3_NODE_DOUBLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X710 | DOT1Q | L2BDMACLRN | BASE | VHOST | 1VM -| ... | VHOST_1024 | LBOND | LBOND_VPP | LBOND_MODE_LACP | LBOND_LB_L34 -| ... | LBOND_2L | NF_VPPL2XC | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | 2lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc -| -| Suite Setup | Setup suite topology interfaces | performance -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | vhost -| -| Test Template | Local Template -| -| Documentation | **RFC2544: Pkt throughput L2BD test cases with vhost and vpp \ -| ... | link bonding** -| ... | -| ... | - **[Top] Network Topologies:** TG-DUT1=DUT2-TG 3-node circular \ -| ... | topology with single links between TG and DUT nodes and double link \ -| ... | between DUT nodes. -| ... | -| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. \ -| ... | 802.1q tagging is applied on link between DUT1 and DUT2. -| ... | -| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with VPP \ -| ... | link bonding (mode LACP, transmit policy l34) on link between DUT1 and \ -| ... | DUT2 and L2 bridge-domain with MAC learning enabled. Qemu VNFs are \ -| ... | connected to VPP via vhost-user interfaces. Guest is running VPP l2xc \ -| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is \ -| ... | tested with ${nic_name}. -| ... | -| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ -| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ -| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ -| ... | expressed in percentage of packets transmitted. NDR and PDR are \ -| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ -| ... | library. -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ -| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ -| ... | addresses of the TG node interfaces. -| ... | -| ... | - **[Ref] Applicable standard specifications:** RFC2544. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | lacp_plugin.so -| ... | vhost_plugin.so -| ${crypto_type}= | ${None} -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 4 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L2 -| ${overhead}= | ${4} -| ${subid}= | 10 -| ${tag_rewrite}= | pop-1 -| ${nf_dtcr}= | ${1} -| ${nf_dtc}= | ${1} -| ${nf_chains}= | ${1} -| ${nf_nodes}= | ${1} -# Link bonding config -| ${bond_mode}= | lacp -| ${lb_mode}= | l34 -| ${bd_id1}= | 1 -| ${bd_id2}= | 2 -# Traffic profile: -| ${traffic_profile}= | trex-stl-ethip4-ip4src254 - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | - **[Cfg]** DUT runs L2BD switching config. \ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | Set Test Variable | ${vlan_strip_off} | ${TRUE} -| | -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize L2 bridge domains with Vhost-User and VLAN with VPP link bonding in a 3-node circular topology -| | ... | ${bd_id1} | ${bd_id2} | ${subid} -| | ... | ${tag_rewrite} | ${bond_mode} | ${lb_mode} -| | And Configure chains of NFs connected via vhost-user -| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | jumbo=${jumbo} -| | ... | use_tuned_cfs=${False} | auto_scale=${True} -| | ... | vnf=vppl2xc_2vhostvr1024 -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| 64B-1c-2lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| 64B-2c-2lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| 64B-4c-2lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| 1518B-1c-2lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-2lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-2lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-2lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-2lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-2lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-2lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-2lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-2lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-2lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-2lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot deleted file mode 100644 index ee65ca4828..0000000000 --- a/tests/vpp/perf/vm_vhost/10ge2p1x710-2lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot +++ /dev/null @@ -1,163 +0,0 @@ -# Copyright (c) 2023 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| -| Force Tags | 3_NODE_DOUBLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X710 | DOT1Q | L2XCFWD | BASE | VHOST | 1VM -| ... | VHOST_1024 | LBOND | LBOND_VPP | LBOND_MODE_LACP | LBOND_LB_L34 -| ... | LBOND_2L | NF_TESTPMD | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | 2lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| -| Suite Setup | Setup suite topology interfaces | performance -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | vhost -| -| Test Template | Local Template -| -| Documentation | **RFC2544: Pkt throughput L2XC test cases with vhost and vpp \ -| ... | link bonding** -| ... | -| ... | - **[Top] Network Topologies:** TG-DUT1=DUT2-TG 3-node circular \ -| ... | topology with single links between TG and DUT nodes and double link \ -| ... | between DUT nodes. -| ... | -| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 cross connect. \ -| ... | 802.1q tagging is applied on link between DUT1 and DUT2. -| ... | -| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with VPP \ -| ... | link bonding (mode LACP, transmit policy l34) on link between DUT1 and \ -| ... | DUT2 and L2 cross- connect. Qemu VNFs are \ -| ... | connected to VPP via vhost-user interfaces. Guest is running testpmd \ -| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is \ -| ... | tested with ${nic_name}. -| ... | -| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ -| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ -| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ -| ... | expressed in percentage of packets transmitted. NDR and PDR are \ -| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ -| ... | library. -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ -| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ -| ... | addresses of the TG node interfaces. -| ... | -| ... | - **[Ref] Applicable standard specifications:** RFC2544. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | lacp_plugin.so -| ... | vhost_plugin.so -| ${crypto_type}= | ${None} -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 4 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L2 -| ${overhead}= | ${4} -| ${subid}= | 10 -| ${tag_rewrite}= | pop-1 -| ${nf_dtcr}= | ${1} -| ${nf_dtc}= | ${1} -| ${nf_chains}= | ${1} -| ${nf_nodes}= | ${1} -# Link bonding config -| ${bond_mode}= | lacp -| ${lb_mode}= | l34 -# Traffic profile: -| ${traffic_profile}= | trex-stl-ethip4-ip4src254 - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | - **[Cfg]** DUT runs L2XC switching config. \ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | Set Test Variable | ${vlan_strip_off} | ${TRUE} -| | -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize L2 xconnect with Vhost-User and VLAN with VPP link bonding in 3-node circular topology -| | ... | ${subid} | ${tag_rewrite} | ${bond_mode} | ${lb_mode} -| | And Configure chains of NFs connected via vhost-user -| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | jumbo=${jumbo} -| | ... | use_tuned_cfs=${False} | auto_scale=${True} | vnf=testpmd_io -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| 64B-1c-2lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| 64B-2c-2lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| 64B-4c-2lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| 1518B-1c-2lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-2lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-2lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-2lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-2lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-2lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-2lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-2lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-2lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-2lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-2lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot deleted file mode 100644 index a39abf5089..0000000000 --- a/tests/vpp/perf/vm_vhost/10ge2p1x710-2lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot +++ /dev/null @@ -1,164 +0,0 @@ -# Copyright (c) 2023 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| -| Force Tags | 3_NODE_DOUBLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X710 | DOT1Q | L2XCFWD | BASE | VHOST |1VM -| ... | VHOST_1024 | LBOND | LBOND_VPP | LBOND_MODE_LACP | LBOND_LB_L34 -| ... | LBOND_2L | NF_VPPL2XC | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | 2lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc -| -| Suite Setup | Setup suite topology interfaces | performance -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | vhost -| -| Test Template | Local Template -| -| Documentation | **RFC2544: Pkt throughput L2XC test cases with vhost and vpp \ -| ... | link bonding** -| ... | -| ... | - **[Top] Network Topologies:** TG-DUT1=DUT2-TG 3-node circular \ -| ... | topology with single links between TG and DUT nodes and double link \ -| ... | between DUT nodes. -| ... | -| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 cross connect. \ -| ... | 802.1q tagging is applied on link between DUT1 and DUT2. -| ... | -| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with VPP \ -| ... | link bonding (mode LACP, transmit policy l34) on link between DUT1 and \ -| ... | DUT2 and L2 cross- connect. Qemu VNFs are \ -| ... | connected to VPP via vhost-user interfaces. Guest is running VPP l2xc \ -| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is \ -| ... | tested with ${nic_name}. -| ... | -| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ -| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ -| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ -| ... | expressed in percentage of packets transmitted. NDR and PDR are \ -| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ -| ... | library. -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ -| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ -| ... | addresses of the TG node interfaces. -| ... | -| ... | - **[Ref] Applicable standard specifications:** RFC2544. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | lacp_plugin.so -| ... | vhost_plugin.so -| ${crypto_type}= | ${None} -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 4 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L2 -| ${overhead}= | ${4} -| ${subid}= | 10 -| ${tag_rewrite}= | pop-1 -| ${nf_dtcr}= | ${1} -| ${nf_dtc}= | ${1} -| ${nf_chains}= | ${1} -| ${nf_nodes}= | ${1} -# Link bonding config -| ${bond_mode}= | lacp -| ${lb_mode}= | l34 -# Traffic profile: -| ${traffic_profile}= | trex-stl-ethip4-ip4src254 - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | - **[Cfg]** DUT runs L2XC switching config. \ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | Set Test Variable | ${vlan_strip_off} | ${TRUE} -| | -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize L2 xconnect with Vhost-User and VLAN with VPP link bonding in 3-node circular topology -| | ... | ${subid} | ${tag_rewrite} | ${bond_mode} | ${lb_mode} -| | And Configure chains of NFs connected via vhost-user -| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | jumbo=${jumbo} -| | ... | use_tuned_cfs=${False} | auto_scale=${True} -| | ... | vnf=vppl2xc_2vhostvr1024 -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| 64B-1c-2lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| 64B-2c-2lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| 64B-4c-2lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| 1518B-1c-2lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-2lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-2lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-2lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-2lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-2lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-2lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-2lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-2lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} |