diff options
Diffstat (limited to 'tests/vpp/perf/vts')
7 files changed, 82 insertions, 598 deletions
diff --git a/tests/vpp/perf/vts/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-mrr.robot b/tests/vpp/perf/vts/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-mrr.robot deleted file mode 100644 index d9de20d082..0000000000 --- a/tests/vpp/perf/vts/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-mrr.robot +++ /dev/null @@ -1,166 +0,0 @@ -# Copyright (c) 2018 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR -| ... | NIC_Intel-X520-DA2 | L2BDMACLRN | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY -| ... | VHOST | VM | VHOST_1024 | VTS | ACL_PERMIT -| ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model -| ... | L3 | Intel-X520-DA2 -| ... | AND | Set up performance test suite with ACL -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| Test Teardown | Tear down mrr test with vhost and VM with dpdk-testpmd and ACL -| ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} -| ... -| Test Template | Local Template -| ... -| Documentation | *Raw results L2BD test cases with VXLANoIPv4 and vhost* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUT1 and DUT2. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge- -| ... | domain and MAC learning enabled. Qemu Guest is connected to VPP via -| ... | vhost-user interfaces. Guest is running DPDK testpmd interconnecting -| ... | vhost-user interfaces using 5 cores pinned to cpus 5-9 and 2048M -| ... | memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores -| ... | (1 main core and 4 cores dedicated for io), forwarding mode is set to -| ... | io, rxd/txd=256, burst=64. DUT1, DUT2 are tested with 2p10GE NIC X520 -| ... | Niantic by Intel. -| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic -| ... | at line rate and reports total received/sent packets over trial period. -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 253 flows per flow-group) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static -| ... | payload. MAC addresses are matching MAC addresses of the TG node -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348. - -*** Variables *** -# X520-DA2 bandwidth limit -| ${s_limit}= | ${10000000000} -| ${overhead}= | ${50} -# Socket names -| ${dut1_bd_id1}= | 1 -| ${dut1_bd_id2}= | 2 -| ${dut2_bd_id1}= | 1 -| ${sock1}= | /var/run/vpp/sock-1-${dut1_bd_id1} -| ${sock2}= | /var/run/vpp/sock-1-${dut1_bd_id2} -# Traffic profile: -| ${traffic_profile}= | trex-sl-ethip4-vxlansrc253 -| ${acl_type}= | permit -# Defaults for teardown: -| ${dut1}= | ${None} -| ${dut1_vm_refs}= | ${None} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ -| | ... | trial throughput test. -| | ... -| | ... | *Arguments:* -| | ... | - framesize - L2 Frame Size [B]. Type: integer -| | ... | - phy_cores - Number of worker threads to be used. Type: integer -| | ... | - rxq - Number of Rx queues to be used. Type: integer -| | ... | - acl_type - FIXME. -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_limit} | ${framesize} | overhead=${overhead} -| | And Apply startup configuration on all VPP DUTs -| | &{vxlan1} = | Create Dictionary | vni=24 | vtep=172.17.0.2 -| | &{vxlan2} = | Create Dictionary | vni=24 | vtep=172.27.0.2 -| | @{dut1_vxlans} = | Create List | ${vxlan1} -| | @{dut2_vxlans} = | Create List | ${vxlan2} -| | Set interfaces in path up -| | Configure vhost interfaces for L2BD forwarding | ${dut1} -| | ... | ${sock1} | ${sock2} -| | When Init L2 bridge domains with single DUT with Vhost-User and VXLANoIPv4 in 3-node circular topology -| | ... | 172.16.0.1 | 16 | 172.26.0.1 | 16 | 172.16.0.2 | 172.26.0.2 -| | ... | ${dut1_vxlans} | ${dut2_vxlans} | 172.17.0.0 | 16 | 172.27.0.0 | 16 -| | @{permit_list} = | Create List | 10.0.0.1/32 | 10.0.0.2/32 -| | Run Keyword If | '${acl_type}' != '${EMPTY}' -| | ... | Configure ACLs on a single interface | ${dut1} | ${dut1_if2} | input -| | ... | ${acl_type} | @{permit_list} -| | ${nf_cpus}= | Create network function CPU list | DUT1 -| | ... | chains=${1} | nodeness=${1} | chain_id=${1} -| | ... | node_id=${1} | auto_scale=${True} -| | ${vm1} = | And Configure guest VM with dpdk-testpmd connected via vhost-user -| | ... | DUT1 | ${sock1} | ${sock2} | DUT1_VM1 | ${nf_cpus} -| | ... | jumbo=${jumbo} | perf_qemu_qsz=${1024} | use_tuned_cfs=${False} -| | Set Test Variable | &{dut1_vm_refs} | DUT1_VM1=${vm1} -| | Then Traffic should pass with maximum rate -| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} - -*** Test Cases *** -| tc01-114B-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-mrr -| | [Tags] | 114B | 1C -| | framesize=${114} | phy_cores=${1} - -| tc02-114B-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-mrr -| | [Tags] | 114B | 2C -| | framesize=${114} | phy_cores=${2} - -| tc03-114B-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-mrr -| | [Tags] | 114B | 4C -| | framesize=${114} | phy_cores=${4} - -| tc04-1518B-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-mrr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-mrr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-mrr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-mrr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-mrr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-mrr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-mrr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-mrr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-mrr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/vts/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-mrr.robot b/tests/vpp/perf/vts/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-mrr.robot deleted file mode 100644 index 67ac44b9f7..0000000000 --- a/tests/vpp/perf/vts/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-mrr.robot +++ /dev/null @@ -1,166 +0,0 @@ -# Copyright (c) 2018 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR -| ... | NIC_Intel-X520-DA2 | L2BDMACLRN | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY -| ... | VHOST | VM | VHOST_1024 | VTS | ACL_PERMIT_REFLECT -| ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model -| ... | L3 | Intel-X520-DA2 -| ... | AND | Set up performance test suite with ACL -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| Test Teardown | Tear down mrr test with vhost and VM with dpdk-testpmd and ACL -| ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} -| ... -| Test Template | Local Template -| ... -| Documentation | *Raw results L2BD test cases with VXLANoIPv4 and vhost* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUT1 and DUT2. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge- -| ... | domain and MAC learning enabled. Qemu Guest is connected to VPP via -| ... | vhost-user interfaces. Guest is running DPDK testpmd interconnecting -| ... | vhost-user interfaces using 5 cores pinned to cpus 5-9 and 2048M -| ... | memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores -| ... | (1 main core and 4 cores dedicated for io), forwarding mode is set to -| ... | io, rxd/txd=256, burst=64. DUT1, DUT2 are tested with 2p10GE NIC X520 -| ... | Niantic by Intel. -| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic -| ... | at line rate and reports total received/sent packets over trial period. -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 253 flows per flow-group) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static -| ... | payload. MAC addresses are matching MAC addresses of the TG node -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348. - -*** Variables *** -# X520-DA2 bandwidth limit -| ${s_limit}= | ${10000000000} -| ${overhead}= | ${50} -# Socket names -| ${dut1_bd_id1}= | 1 -| ${dut1_bd_id2}= | 2 -| ${dut2_bd_id1}= | 1 -| ${sock1}= | /var/run/vpp/sock-1-${dut1_bd_id1} -| ${sock2}= | /var/run/vpp/sock-1-${dut1_bd_id2} -# Traffic profile: -| ${traffic_profile}= | trex-sl-ethip4-vxlansrc253 -| ${acl_type}= | permit+reflect -# Defaults for teardown: -| ${dut1}= | ${None} -| ${dut1_vm_refs}= | ${None} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ -| | ... | trial throughput test. -| | ... -| | ... | *Arguments:* -| | ... | - framesize - L2 Frame Size [B]. Type: integer -| | ... | - phy_cores - Number of worker threads to be used. Type: integer -| | ... | - rxq - Number of Rx queues to be used. Type: integer -| | ... | - acl_type - FIXME. -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_limit} | ${framesize} | overhead=${overhead} -| | And Apply startup configuration on all VPP DUTs -| | &{vxlan1} = | Create Dictionary | vni=24 | vtep=172.17.0.2 -| | &{vxlan2} = | Create Dictionary | vni=24 | vtep=172.27.0.2 -| | @{dut1_vxlans} = | Create List | ${vxlan1} -| | @{dut2_vxlans} = | Create List | ${vxlan2} -| | Set interfaces in path up -| | Configure vhost interfaces for L2BD forwarding | ${dut1} -| | ... | ${sock1} | ${sock2} -| | When Init L2 bridge domains with single DUT with Vhost-User and VXLANoIPv4 in 3-node circular topology -| | ... | 172.16.0.1 | 16 | 172.26.0.1 | 16 | 172.16.0.2 | 172.26.0.2 -| | ... | ${dut1_vxlans} | ${dut2_vxlans} | 172.17.0.0 | 16 | 172.27.0.0 | 16 -| | @{permit_list} = | Create List | 10.0.0.1/32 | 10.0.0.2/32 -| | Run Keyword If | '${acl_type}' != '${EMPTY}' -| | ... | Configure ACLs on a single interface | ${dut1} | ${dut1_if2} | input -| | ... | ${acl_type} | @{permit_list} -| | ${nf_cpus}= | Create network function CPU list | DUT1 -| | ... | chains=${1} | nodeness=${1} | chain_id=${1} -| | ... | node_id=${1} | auto_scale=${True} -| | ${vm1} = | And Configure guest VM with dpdk-testpmd connected via vhost-user -| | ... | DUT1 | ${sock1} | ${sock2} | DUT1_VM1 | ${nf_cpus} -| | ... | jumbo=${jumbo} | perf_qemu_qsz=${1024} | use_tuned_cfs=${False} -| | Set Test Variable | &{dut1_vm_refs} | DUT1_VM1=${vm1} -| | Then Traffic should pass with maximum rate -| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} - -*** Test Cases *** -| tc01-114B-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-mrr -| | [Tags] | 114B | 1C -| | framesize=${114} | phy_cores=${1} - -| tc02-114B-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-mrr -| | [Tags] | 114B | 2C -| | framesize=${114} | phy_cores=${2} - -| tc03-114B-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-mrr -| | [Tags] | 114B | 4C -| | framesize=${114} | phy_cores=${4} - -| tc04-1518B-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-mrr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-mrr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-mrr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-mrr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-mrr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-mrr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-mrr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-mrr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-mrr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/vts/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-mrr.robot b/tests/vpp/perf/vts/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-mrr.robot deleted file mode 100644 index d92188153b..0000000000 --- a/tests/vpp/perf/vts/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-mrr.robot +++ /dev/null @@ -1,166 +0,0 @@ -# Copyright (c) 2018 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR -| ... | NIC_Intel-X520-DA2 | L2BDMACLRN | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY -| ... | VHOST | VM | VHOST_1024 | VTS -| ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model -| ... | L3 | Intel-X520-DA2 -| ... | AND | Set up performance test suite with ACL -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| Test Teardown | Tear down mrr test with vhost and VM with dpdk-testpmd and ACL -| ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} -| ... -| Test Template | Local Template -| ... -| Documentation | *Raw results L2BD test cases with VXLANoIPv4 and vhost* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUT1 and DUT2. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge- -| ... | domain and MAC learning enabled. Qemu Guest is connected to VPP via -| ... | vhost-user interfaces. Guest is running DPDK testpmd interconnecting -| ... | vhost-user interfaces using 5 cores pinned to cpus 5-9 and 2048M -| ... | memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores -| ... | (1 main core and 4 cores dedicated for io), forwarding mode is set to -| ... | io, rxd/txd=256, burst=64. DUT1, DUT2 are tested with 2p10GE NIC X520 -| ... | Niantic by Intel. -| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic -| ... | at line rate and reports total received/sent packets over trial period. -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 253 flows per flow-group) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static -| ... | payload. MAC addresses are matching MAC addresses of the TG node -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348. - -*** Variables *** -# X520-DA2 bandwidth limit -| ${s_limit}= | ${10000000000} -| ${overhead}= | ${50} -# Socket names -| ${dut1_bd_id1}= | 1 -| ${dut1_bd_id2}= | 2 -| ${dut2_bd_id1}= | 1 -| ${sock1}= | /var/run/vpp/sock-1-${dut1_bd_id1} -| ${sock2}= | /var/run/vpp/sock-1-${dut1_bd_id2} -# Traffic profile: -| ${traffic_profile}= | trex-sl-ethip4-vxlansrc253 -| ${acl_type}= | ${EMPTY} -# Defaults for teardown: -| ${dut1}= | ${None} -| ${dut1_vm_refs}= | ${None} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ -| | ... | trial throughput test. -| | ... -| | ... | *Arguments:* -| | ... | - framesize - L2 Frame Size [B]. Type: integer -| | ... | - phy_cores - Number of worker threads to be used. Type: integer -| | ... | - rxq - Number of Rx queues to be used. Type: integer -| | ... | - acl_type - FIXME. -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_limit} | ${framesize} | overhead=${overhead} -| | And Apply startup configuration on all VPP DUTs -| | &{vxlan1} = | Create Dictionary | vni=24 | vtep=172.17.0.2 -| | &{vxlan2} = | Create Dictionary | vni=24 | vtep=172.27.0.2 -| | @{dut1_vxlans} = | Create List | ${vxlan1} -| | @{dut2_vxlans} = | Create List | ${vxlan2} -| | Set interfaces in path up -| | Configure vhost interfaces for L2BD forwarding | ${dut1} -| | ... | ${sock1} | ${sock2} -| | When Init L2 bridge domains with single DUT with Vhost-User and VXLANoIPv4 in 3-node circular topology -| | ... | 172.16.0.1 | 16 | 172.26.0.1 | 16 | 172.16.0.2 | 172.26.0.2 -| | ... | ${dut1_vxlans} | ${dut2_vxlans} | 172.17.0.0 | 16 | 172.27.0.0 | 16 -| | @{permit_list} = | Create List | 10.0.0.1/32 | 10.0.0.2/32 -| | Run Keyword If | '${acl_type}' != '${EMPTY}' -| | ... | Configure ACLs on a single interface | ${dut1} | ${dut1_if2} | input -| | ... | ${acl_type} | @{permit_list} -| | ${nf_cpus}= | Create network function CPU list | DUT1 -| | ... | chains=${1} | nodeness=${1} | chain_id=${1} -| | ... | node_id=${1} | auto_scale=${True} -| | ${vm1} = | And Configure guest VM with dpdk-testpmd connected via vhost-user -| | ... | DUT1 | ${sock1} | ${sock2} | DUT1_VM1 | ${nf_cpus} -| | ... | jumbo=${jumbo} | perf_qemu_qsz=${1024} | use_tuned_cfs=${False} -| | Set Test Variable | &{dut1_vm_refs} | DUT1_VM1=${vm1} -| | Then Traffic should pass with maximum rate -| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} - -*** Test Cases *** -| tc01-114B-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-mrr -| | [Tags] | 114B | 1C -| | framesize=${114} | phy_cores=${1} - -| tc02-114B-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-mrr -| | [Tags] | 114B | 2C -| | framesize=${114} | phy_cores=${2} - -| tc03-114B-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-mrr -| | [Tags] | 114B | 4C -| | framesize=${114} | phy_cores=${4} - -| tc04-1518B-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-mrr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-mrr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-mrr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-mrr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-mrr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-mrr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-mrr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-mrr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-mrr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/vts/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vts/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr.robot index e3ec36c708..44206eb314 100644 --- a/tests/vpp/perf/vts/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr.robot +++ b/tests/vpp/perf/vts/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2018 Cisco and/or its affiliates. +# Copyright (c) 2019 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -15,18 +15,17 @@ | Resource | resources/libraries/robot/performance/performance_setup.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X520-DA2 | L2BDMACLRN | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY +| ... | NIC_Intel-X710 | L2BDMACLRN | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY | ... | VHOST | VM | VHOST_1024 | VTS | ACL_PERMIT | ... | Suite Setup | Run Keywords | ... | Set up 3-node performance topology with DUT's NIC model -| ... | L3 | Intel-X520-DA2 +| ... | L3 | ${nic_name} | ... | AND | Set up performance test suite with ACL | Suite Teardown | Tear down 3-node performance topology | ... | Test Setup | Set up performance test | Test Teardown | Tear down performance test with vhost and VM with dpdk-testpmd and ACL -| ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} | ... | Test Template | Local Template @@ -44,13 +43,12 @@ | ... | vhost-user interfaces using 5 cores pinned to cpus 5-9 and 2048M | ... | memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores | ... | (1 main core and 4 cores dedicated for io), forwarding mode is set to -| ... | io, rxd/txd=256, burst=64. DUT1, DUT2 are tested with 2p10GE NIC X520 -| ... | Niantic by Intel. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage -| ... | of packets transmitted. NDR and PDR are discovered for different -| ... | Ethernet L2 frame sizes using MLRsearch library. +| ... | io, rxd/txd=256, burst=64. DUT1, DUT2 are tested with ${nic_name}.\ +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ | ... | Test packets are generated by TG on | ... | links to DUTs. TG traffic profile contains two L3 flow-groups | ... | (flow-group per direction, 253 flows per flow-group) with all packets @@ -60,8 +58,7 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348. *** Variables *** -# X520-DA2 bandwidth limit -| ${s_limit}= | ${10000000000} +| ${nic_name}= | Intel-X710 | ${overhead}= | ${50} # Socket names | ${dut1_bd_id1}= | 1 @@ -71,7 +68,6 @@ | ${sock2}= | /var/run/vpp/sock-1-${dut1_bd_id2} # Traffic profile: | ${traffic_profile}= | trex-sl-ethip4-vxlansrc253 -| ${min_rate}= | ${10000} | ${acl_type}= | permit # Defaults for teardown: | ${dut1}= | ${None} @@ -82,22 +78,21 @@ | | [Documentation] | | ... | [Cfg] DUT runs L2BD switching config. | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ | | ... | | ... | *Arguments:* -| | ... | - framesize - L2 Frame Size [B]. Type: integer +| | ... | - frame_size - L2 Frame Size [B]. Type: integer | | ... | - phy_cores - Number of worker threads to be used. Type: integer | | ... | - rxq - Number of Rx queues to be used. Type: integer | | ... | - acl_type - FIXME. | | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} | | ... -| | Set Test Variable | ${framesize} +| | Set Test Variable | \${frame_size} | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_limit} | ${framesize} | overhead=${overhead} +| | Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | &{vxlan1} = | Create Dictionary | vni=24 | vtep=172.17.0.2 | | &{vxlan2} = | Create Dictionary | vni=24 | vtep=172.27.0.2 @@ -121,53 +116,52 @@ | | ... | jumbo=${jumbo} | perf_qemu_qsz=${1024} | use_tuned_cfs=${False} | | Set Test Variable | &{dut1_vm_refs} | DUT1_VM1=${vm1} | | Then Find NDR and PDR intervals using optimized search -| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} *** Test Cases *** | tc01-114B-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr | | [Tags] | 114B | 1C -| | framesize=${114} | phy_cores=${1} +| | frame_size=${114} | phy_cores=${1} | tc02-114B-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr | | [Tags] | 114B | 2C -| | framesize=${114} | phy_cores=${2} +| | frame_size=${114} | phy_cores=${2} | tc03-114B-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr | | [Tags] | 114B | 4C -| | framesize=${114} | phy_cores=${4} +| | frame_size=${114} | phy_cores=${4} | tc04-1518B-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr | | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} +| | frame_size=${1518} | phy_cores=${1} | tc05-1518B-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr | | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} +| | frame_size=${1518} | phy_cores=${2} | tc06-1518B-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr | | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} +| | frame_size=${1518} | phy_cores=${4} | tc07-9000B-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr | | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} +| | frame_size=${9000} | phy_cores=${1} | tc08-9000B-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr | | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} +| | frame_size=${9000} | phy_cores=${2} | tc09-9000B-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr | | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} +| | frame_size=${9000} | phy_cores=${4} | tc10-IMIX-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr | | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} +| | frame_size=IMIX_v4_1 | phy_cores=${1} | tc11-IMIX-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr | | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} +| | frame_size=IMIX_v4_1 | phy_cores=${2} | tc12-IMIX-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr | | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/vts/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vts/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-ndrpdr.robot index 74ac7fb8f6..fbe52e83e6 100644 --- a/tests/vpp/perf/vts/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-ndrpdr.robot +++ b/tests/vpp/perf/vts/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2018 Cisco and/or its affiliates. +# Copyright (c) 2019 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -15,18 +15,17 @@ | Resource | resources/libraries/robot/performance/performance_setup.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X520-DA2 | L2BDMACLRN | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY +| ... | NIC_Intel-X710 | L2BDMACLRN | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY | ... | VHOST | VM | VHOST_1024 | VTS | ACL_PERMIT_REFLECT | ... | Suite Setup | Run Keywords | ... | Set up 3-node performance topology with DUT's NIC model -| ... | L3 | Intel-X520-DA2 +| ... | L3 | ${nic_name} | ... | AND | Set up performance test suite with ACL | Suite Teardown | Tear down 3-node performance topology | ... | Test Setup | Set up performance test | Test Teardown | Tear down performance test with vhost and VM with dpdk-testpmd and ACL -| ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} | ... | Test Template | Local Template @@ -44,13 +43,12 @@ | ... | vhost-user interfaces using 5 cores pinned to cpus 5-9 and 2048M | ... | memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores | ... | (1 main core and 4 cores dedicated for io), forwarding mode is set to -| ... | io, rxd/txd=256, burst=64. DUT1, DUT2 are tested with 2p10GE NIC X520 -| ... | Niantic by Intel. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage -| ... | of packets transmitted. NDR and PDR are discovered for different -| ... | Ethernet L2 frame sizes using MLRsearch library. +| ... | io, rxd/txd=256, burst=64. DUT1, DUT2 are tested with ${nic_name}.\ +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ | ... | Test packets are generated by TG on | ... | links to DUTs. TG traffic profile contains two L3 flow-groups | ... | (flow-group per direction, 253 flows per flow-group) with all packets @@ -60,8 +58,7 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348. *** Variables *** -# X520-DA2 bandwidth limit -| ${s_limit}= | ${10000000000} +| ${nic_name}= | Intel-X710 | ${overhead}= | ${50} # Socket names | ${dut1_bd_id1}= | 1 @@ -71,7 +68,6 @@ | ${sock2}= | /var/run/vpp/sock-1-${dut1_bd_id2} # Traffic profile: | ${traffic_profile}= | trex-sl-ethip4-vxlansrc253 -| ${min_rate}= | ${10000} | ${acl_type}= | permit+reflect # Defaults for teardown: | ${dut1}= | ${None} @@ -82,22 +78,21 @@ | | [Documentation] | | ... | [Cfg] DUT runs L2BD switching config. | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ | | ... | | ... | *Arguments:* -| | ... | - framesize - L2 Frame Size [B]. Type: integer +| | ... | - frame_size - L2 Frame Size [B]. Type: integer | | ... | - phy_cores - Number of worker threads to be used. Type: integer | | ... | - rxq - Number of Rx queues to be used. Type: integer | | ... | - acl_type - FIXME. | | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} | | ... -| | Set Test Variable | ${framesize} +| | Set Test Variable | \${frame_size} | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_limit} | ${framesize} | overhead=${overhead} +| | Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | &{vxlan1} = | Create Dictionary | vni=24 | vtep=172.17.0.2 | | &{vxlan2} = | Create Dictionary | vni=24 | vtep=172.27.0.2 @@ -121,53 +116,52 @@ | | ... | jumbo=${jumbo} | perf_qemu_qsz=${1024} | use_tuned_cfs=${False} | | Set Test Variable | &{dut1_vm_refs} | DUT1_VM1=${vm1} | | Then Find NDR and PDR intervals using optimized search -| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} *** Test Cases *** | tc01-114B-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-ndrpdr | | [Tags] | 114B | 1C -| | framesize=${114} | phy_cores=${1} +| | frame_size=${114} | phy_cores=${1} | tc02-114B-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-ndrpdr | | [Tags] | 114B | 2C -| | framesize=${114} | phy_cores=${2} +| | frame_size=${114} | phy_cores=${2} | tc03-114B-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-ndrpdr | | [Tags] | 114B | 4C -| | framesize=${114} | phy_cores=${4} +| | frame_size=${114} | phy_cores=${4} | tc04-1518B-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-ndrpdr | | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} +| | frame_size=${1518} | phy_cores=${1} | tc05-1518B-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-ndrpdr | | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} +| | frame_size=${1518} | phy_cores=${2} | tc06-1518B-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-ndrpdr | | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} +| | frame_size=${1518} | phy_cores=${4} | tc07-9000B-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-ndrpdr | | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} +| | frame_size=${9000} | phy_cores=${1} | tc08-9000B-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-ndrpdr | | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} +| | frame_size=${9000} | phy_cores=${2} | tc09-9000B-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-ndrpdr | | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} +| | frame_size=${9000} | phy_cores=${4} | tc10-IMIX-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-ndrpdr | | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} +| | frame_size=IMIX_v4_1 | phy_cores=${1} | tc11-IMIX-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-ndrpdr | | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} +| | frame_size=IMIX_v4_1 | phy_cores=${2} | tc12-IMIX-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-ndrpdr | | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/vts/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vts/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-ndrpdr.robot index 28631e004c..8cead13f8a 100644 --- a/tests/vpp/perf/vts/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-ndrpdr.robot +++ b/tests/vpp/perf/vts/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2018 Cisco and/or its affiliates. +# Copyright (c) 2019 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -15,18 +15,17 @@ | Resource | resources/libraries/robot/performance/performance_setup.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X520-DA2 | L2BDMACLRN | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY +| ... | NIC_Intel-X710 | L2BDMACLRN | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY | ... | VHOST | VM | VHOST_1024 | VTS | ... | Suite Setup | Run Keywords | ... | Set up 3-node performance topology with DUT's NIC model -| ... | L3 | Intel-X520-DA2 +| ... | L3 | ${nic_name} | ... | AND | Set up performance test suite with ACL | Suite Teardown | Tear down 3-node performance topology | ... | Test Setup | Set up performance test | Test Teardown | Tear down performance test with vhost and VM with dpdk-testpmd and ACL -| ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} | ... | Test Template | Local Template @@ -44,13 +43,12 @@ | ... | vhost-user interfaces using 5 cores pinned to cpus 5-9 and 2048M | ... | memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores | ... | (1 main core and 4 cores dedicated for io), forwarding mode is set to -| ... | io, rxd/txd=256, burst=64. DUT1, DUT2 are tested with 2p10GE NIC X520 -| ... | Niantic by Intel. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage -| ... | of packets transmitted. NDR and PDR are discovered for different -| ... | Ethernet L2 frame sizes using MLRsearch library. +| ... | io, rxd/txd=256, burst=64. DUT1, DUT2 are tested with ${nic_name}.\ +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ | ... | Test packets are generated by TG on | ... | links to DUTs. TG traffic profile contains two L3 flow-groups | ... | (flow-group per direction, 253 flows per flow-group) with all packets @@ -60,8 +58,7 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348. *** Variables *** -# X520-DA2 bandwidth limit -| ${s_limit}= | ${10000000000} +| ${nic_name}= | Intel-X710 | ${overhead}= | ${50} # Socket names | ${dut1_bd_id1}= | 1 @@ -71,7 +68,6 @@ | ${sock2}= | /var/run/vpp/sock-1-${dut1_bd_id2} # Traffic profile: | ${traffic_profile}= | trex-sl-ethip4-vxlansrc253 -| ${min_rate}= | ${10000} | ${acl_type}= | ${EMPTY} # Defaults for teardown: | ${dut1}= | ${None} @@ -82,22 +78,21 @@ | | [Documentation] | | ... | [Cfg] DUT runs L2BD switching config. | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ | | ... | | ... | *Arguments:* -| | ... | - framesize - L2 Frame Size [B]. Type: integer +| | ... | - frame_size - L2 Frame Size [B]. Type: integer | | ... | - phy_cores - Number of worker threads to be used. Type: integer | | ... | - rxq - Number of Rx queues to be used. Type: integer | | ... | - acl_type - FIXME. | | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} | | ... -| | Set Test Variable | ${framesize} +| | Set Test Variable | \${frame_size} | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_limit} | ${framesize} | overhead=${overhead} +| | Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | &{vxlan1} = | Create Dictionary | vni=24 | vtep=172.17.0.2 | | &{vxlan2} = | Create Dictionary | vni=24 | vtep=172.27.0.2 @@ -121,53 +116,52 @@ | | ... | jumbo=${jumbo} | perf_qemu_qsz=${1024} | use_tuned_cfs=${False} | | Set Test Variable | &{dut1_vm_refs} | DUT1_VM1=${vm1} | | Then Find NDR and PDR intervals using optimized search -| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} *** Test Cases *** | tc01-114B-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-ndrpdr | | [Tags] | 114B | 1C -| | framesize=${114} | phy_cores=${1} +| | frame_size=${114} | phy_cores=${1} | tc02-114B-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-ndrpdr | | [Tags] | 114B | 2C -| | framesize=${114} | phy_cores=${2} +| | frame_size=${114} | phy_cores=${2} | tc03-114B-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-ndrpdr | | [Tags] | 114B | 4C -| | framesize=${114} | phy_cores=${4} +| | frame_size=${114} | phy_cores=${4} | tc04-1518B-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-ndrpdr | | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} +| | frame_size=${1518} | phy_cores=${1} | tc05-1518B-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-ndrpdr | | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} +| | frame_size=${1518} | phy_cores=${2} | tc06-1518B-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-ndrpdr | | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} +| | frame_size=${1518} | phy_cores=${4} | tc07-9000B-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-ndrpdr | | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} +| | frame_size=${9000} | phy_cores=${1} | tc08-9000B-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-ndrpdr | | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} +| | frame_size=${9000} | phy_cores=${2} | tc09-9000B-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-ndrpdr | | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} +| | frame_size=${9000} | phy_cores=${4} | tc10-IMIX-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-ndrpdr | | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} +| | frame_size=IMIX_v4_1 | phy_cores=${1} | tc11-IMIX-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-ndrpdr | | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} +| | frame_size=IMIX_v4_1 | phy_cores=${2} | tc12-IMIX-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-ndrpdr | | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/vts/regenerate_testcases.py b/tests/vpp/perf/vts/regenerate_testcases.py index adfde89b5c..4fafb31de2 100755 --- a/tests/vpp/perf/vts/regenerate_testcases.py +++ b/tests/vpp/perf/vts/regenerate_testcases.py @@ -1,6 +1,6 @@ #!/usr/bin/env python -# Copyright (c) 2018 Cisco and/or its affiliates. +# Copyright (c) 2019 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: |