diff options
Diffstat (limited to 'tests/vpp/perf')
11 files changed, 1020 insertions, 287 deletions
diff --git a/tests/vpp/perf/ip6/regenerate_testcases.py b/tests/vpp/perf/ip6/regenerate_testcases.py index b63f55bbd9..d98546b14d 100755 --- a/tests/vpp/perf/ip6/regenerate_testcases.py +++ b/tests/vpp/perf/ip6/regenerate_testcases.py @@ -15,4 +15,4 @@ from resources.libraries.python.autogen.Regenerator import Regenerator -Regenerator().regenerate_glob("*.robot", is_ip6=True) +Regenerator().regenerate_glob("*.robot", protocol="ip6") diff --git a/tests/vpp/perf/ip6_tunnels/regenerate_testcases.py b/tests/vpp/perf/ip6_tunnels/regenerate_testcases.py index b63f55bbd9..d98546b14d 100755 --- a/tests/vpp/perf/ip6_tunnels/regenerate_testcases.py +++ b/tests/vpp/perf/ip6_tunnels/regenerate_testcases.py @@ -15,4 +15,4 @@ from resources.libraries.python.autogen.Regenerator import Regenerator -Regenerator().regenerate_glob("*.robot", is_ip6=True) +Regenerator().regenerate_glob("*.robot", protocol="ip6") diff --git a/tests/vpp/perf/srv6/regenerate_testcases.py b/tests/vpp/perf/srv6/regenerate_testcases.py index b63f55bbd9..d98546b14d 100755 --- a/tests/vpp/perf/srv6/regenerate_testcases.py +++ b/tests/vpp/perf/srv6/regenerate_testcases.py @@ -15,4 +15,4 @@ from resources.libraries.python.autogen.Regenerator import Regenerator -Regenerator().regenerate_glob("*.robot", is_ip6=True) +Regenerator().regenerate_glob("*.robot", protocol="ip6") diff --git a/tests/vpp/perf/vts/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-2vhostvr1024-1vm-ndrpdrdisc.robot b/tests/vpp/perf/vts/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-2vhostvr1024-1vm-ndrpdrdisc.robot deleted file mode 100644 index ef8722b62a..0000000000 --- a/tests/vpp/perf/vts/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-2vhostvr1024-1vm-ndrpdrdisc.robot +++ /dev/null @@ -1,284 +0,0 @@ -# Copyright (c) 2018 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| Library | resources.libraries.python.QemuUtils -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC -| ... | NIC_Intel-X520-DA2 | L2BDMACLRN | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY -| ... | VHOST | VM | VHOST_1024 | VTS -| ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model -| ... | L3 | Intel-X520-DA2 -| ... | AND | Set up performance test suite with ACL -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| Test Teardown | Tear down performance test with vhost and VM with dpdk-testpmd and ACL -| ... | ${min_rate}pps | ${framesize} | ${traffic_profile} -| ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} -| ... -| Test Template | Local template -| ... -| Documentation | *RFC2544: Packet throughput L2BD test cases with VXLANoIPv4 -| ... | and vhost* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUT1 and DUT2. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge- -| ... | domain and MAC learning enabled. Qemu Guest is connected to VPP via -| ... | vhost-user interfaces. Guest is running DPDK testpmd interconnecting -| ... | vhost-user interfaces using 5 cores pinned to cpus 5-9 and 2048M -| ... | memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores -| ... | (1 main core and 4 cores dedicated for io), forwarding mode is set to -| ... | io, rxd/txd=256, burst=64. DUT1, DUT2 are tested with 2p10GE NIC X520 -| ... | Niantic by Intel. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage -| ... | of packets transmitted. NDR and PDR are discovered for different -| ... | Ethernet L2 frame sizes using either binary search or linear search -| ... | algorithms with configured starting rate and final step that determines -| ... | throughput measurement resolution. Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 253 flows per flow-group) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static -| ... | payload. MAC addresses are matching MAC addresses of the TG node -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348. - -*** Variables *** -| ${perf_qemu_qsz}= | 1024 -# X520-DA2 bandwidth limit -| ${s_limit}= | ${10000000000} -| ${vxlan_overhead}= | ${50} -# Socket names -| ${dut1_bd_id1}= | 1 -| ${dut1_bd_id2}= | 2 -| ${dut2_bd_id1}= | 1 -| ${sock1}= | /tmp/sock-1-${dut1_bd_id1} -| ${sock2}= | /tmp/sock-1-${dut1_bd_id2} -# Traffic profile: -| ${traffic_profile} | trex-sl-ethip4-vxlansrc253 -| ${min_rate}= | ${10000} - - -*** Keywords *** -| Configure ACLs on a single interface -| | [Documentation] -| | ... | Configure ACL -| | ... -| | ... | *Arguments:* -| | ... | - dut - DUT node. Type: string -| | ... | - dut_if - DUT node interface name. Type: string -| | ... | - acl_apply_type - To what path apply the ACL - input or output. -| | ... | - acl_action - Action for the rule - deny, permit, permit+reflect. -| | ... | - subnets - Subnets to apply the specific ACL. Type: list -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Configure ACLs on a single interface \| ${nodes['DUT1']} -| | ... | \| ... \| GigabitEthernet0/7/0 \| input \| permit | 0.0.0.0/0 -| | ... -| | [Arguments] | ${dut} | ${dut_if} | ${acl_apply_type} | ${acl_action} -| | ... | @{subnets} -| | Set Test variable | ${acl} | ${EMPTY} -| | :FOR | ${subnet} | IN | @{subnets} -| | | ${acl}= | Run Keyword If | '${acl}' == '${EMPTY}' -| | | ... | Set Variable | ipv4 ${acl_action} src ${subnet} -| | | ... | ELSE -| | | ... | Catenate | SEPARATOR=, | ${acl} -| | | ... | ipv4 ${acl_action} src ${subnet} -| | Add Replace Acl Multi Entries | ${dut} | rules=${acl} -| | @{acl_list}= | Create List | ${0} -| | Set Acl List For Interface | ${dut} | ${dut_if} | ${acl_apply_type} -| | ... | ${acl_list} - - -*** Keywords *** -| Local template -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... -| | ... | *Arguments:* -| | ... | - phy_cores - Number of worker threads to be used. Type: integer -| | ... | - rxq - Number of Rx queues to be used. Type: integer -| | ... | - pkt_framesize - L2 Frame Size [B]. Type: integer -| | ... | - search_type - Type of the search - non drop rate (NDR) or partial -| | ... | drop rare (PDR). Type: string -| | ... -| | [Arguments] | ${phy_cores} | ${pkt_framesize} | ${search_type} -| | ... | ${acl_type}=${EMPTY} | ${rxq}=${None} -| | ... -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | ${max_pkt_size}= | Set Variable If | '${pkt_framesize}' == 'IMIX_v4_1' | -| | ... | ${1500 + ${vxlan_overhead}} | ${pkt_framesize + ${vxlan_overhead}} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${max_pkt_size} -| | ${binary_max}= | Set Variable | ${max_rate} -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | Add PCI devices to all DUTs -| | And Run Keyword If | ${max_pkt_size} < ${1522} -| | ... | Add no multi seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | &{vxlan1}= | Create Dictionary | vni=24 | vtep=172.17.0.2 -| | &{vxlan2}= | Create Dictionary | vni=24 | vtep=172.27.0.2 -| | @{dut1_vxlans}= | Create List | ${vxlan1} -| | @{dut2_vxlans}= | Create List | ${vxlan2} -| | ${jumbo_frames}= | Set Variable If -| | ... | ${max_pkt_size} < ${1522} | ${False} | ${True} -| | Set interfaces in path in 3-node circular topology up -| | Configure vhost interfaces for L2BD forwarding | ${dut1} -| | ... | ${sock1} | ${sock2} -| | When Init L2 bridge domains with single DUT with Vhost-User and VXLANoIPv4 in 3-node circular topology -| | ... | 172.16.0.1 | 16 | 172.26.0.1 | 16 | 172.16.0.2 | 172.26.0.2 -| | ... | ${dut1_vxlans} | ${dut2_vxlans} | 172.17.0.0 | 16 | 172.27.0.0 | 16 -| | @{permit_list}= | Create List | 10.0.0.1/32 | 10.0.0.2/32 -| | Run Keyword If | '${acl_type}' != '${EMPTY}' -| | ... | Configure ACLs on a single interface | ${dut1} | ${dut1_if2} | input -| | ... | ${acl_type} | @{permit_list} -| | ${vm1}= | And Configure guest VM with dpdk-testpmd connected via vhost-user -| | ... | ${dut1} | ${sock1} | ${sock2} | DUT1_VM1 -| | ... | jumbo_frames=${jumbo_frames} -| | Set Test Variable | &{dut1_vm_refs} | DUT1_VM1=${vm1} -| | Set Test Variable | ${framesize} | ${pkt_framesize} -| | ${pkt_framesize}= | Set Variable If | '${pkt_framesize}' == 'IMIX_v4_1' | -| | ... | ${pkt_framesize} | ${pkt_framesize + ${vxlan_overhead}} -| | Run Keyword If | '${search_type}' == 'NDR' -| | ... | Find NDR using binary search and pps -| | ... | ${pkt_framesize} | ${binary_min} | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} -| | ... | ELSE IF | '${search_type}' == 'PDR' -| | ... | Find PDR using binary search and pps -| | ... | ${pkt_framesize} | ${binary_min} | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} -| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} - -*** Test Cases *** -| tc01-64B-2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc -| | [Tags] | 64B | 2C | NDRDISC -| | phy_cores=${2} | pkt_framesize=${64} | search_type=NDR - -| tc02-64B-2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-pdrdisc -| | [Tags] | 64B | 2C | PDRDISC -| | phy_cores=${2} | pkt_framesize=${64} | search_type=PDR - -| tc03-150B-2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc -| | [Tags] | 150B | 2C | NDRDISC -| | phy_cores=${2} | pkt_framesize=${150} | search_type=NDR - -| tc04-150B-2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-pdrdisc -| | [Tags] | 150B | 2C | PDRDISC -| | phy_cores=${2} | pkt_framesize=${150} | search_type=PDR - -| tc05-200B-2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc -| | [Tags] | 200B | 2C | NDRDISC -| | phy_cores=${2} | pkt_framesize=${200} | search_type=NDR - -| tc06-200B-2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-pdrdisc -| | [Tags] | 200B | 2C | PDRDISC -| | phy_cores=${2} | pkt_framesize=${200} | search_type=PDR - -| tc07-IMIX-2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc -| | [Tags] | IMIX | 2C | NDRDISC -| | phy_cores=${2} | pkt_framesize=IMIX_v4_1 | search_type=NDR - -| tc08-IMIX-2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-pdrdisc -| | [Tags] | IMIX | 2C | PDRDISC -| | phy_cores=${2} | pkt_framesize=IMIX_v4_1 | search_type=PDR - -| tc09-64B-2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-acl-ndrdisc -| | [Tags] | 64B | 2C | NDRDISC | ACL_PERMIT -| | phy_cores=${2} | pkt_framesize=${64} | search_type=NDR -| | ... | acl_type=permit - -| tc10-64B-2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-acl-pdrdisc -| | [Tags] | 64B | 2C | PDRDISC | ACL_PERMIT -| | phy_cores=${2} | pkt_framesize=${64} | search_type=PDR -| | ... | acl_type=permit - -| tc11-150B-2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-acl-ndrdisc -| | [Tags] | 150B | 2C | NDRDISC | ACL_PERMIT -| | phy_cores=${2} | pkt_framesize=${150} | search_type=NDR -| | ... | acl_type=permit - -| tc12-150B-2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-acl-pdrdisc -| | [Tags] | 150B | 2C | PDRDISC | ACL_PERMIT -| | phy_cores=${2} | pkt_framesize=${150} | search_type=PDR -| | ... | acl_type=permit - -| tc13-200B-2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-acl-ndrdisc -| | [Tags] | 200B | 2C | NDRDISC | ACL_PERMIT -| | phy_cores=${2} | pkt_framesize=${200} | search_type=NDR -| | ... | acl_type=permit - -| tc14-200B-2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-acl-pdrdisc -| | [Tags] | 200B | 2C | PDRDISC | ACL_PERMIT -| | phy_cores=${2} | pkt_framesize=${200} | search_type=PDR -| | ... | acl_type=permit - -| tc15-IMIX-2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-acl-ndrdisc -| | [Tags] | IMIX | 2C | NDRDISC | ACL_PERMIT -| | phy_cores=${2} | pkt_framesize=IMIX_v4_1 | search_type=NDR -| | ... | acl_type=permit - -| tc16-IMIX-2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-acl-pdrdisc -| | [Tags] | IMIX | 2C | PDRDISC | ACL_PERMIT -| | phy_cores=${2} | pkt_framesize=IMIX_v4_1 | search_type=PDR -| | ... | acl_type=permit - -| tc17-64B-2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-aclreflect-ndrdisc -| | [Tags] | 64B | 2C | NDRDISC | ACL_PERMIT_REFLECT -| | phy_cores=${2} | pkt_framesize=${64} | search_type=NDR -| | ... | acl_type=permit+reflect - -| tc18-64B-2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-aclreflect-pdrdisc -| | [Tags] | 64B | 2C | PDRDISC | ACL_PERMIT_REFLECT -| | phy_cores=${2} | pkt_framesize=${64} | search_type=PDR -| | ... | acl_type=permit+reflect - -| tc19-150B-2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-aclreflect-ndrdisc -| | [Tags] | 150B | 2C | NDRDISC | ACL_PERMIT_REFLECT -| | phy_cores=${2} | pkt_framesize=${150} | search_type=NDR -| | ... | acl_type=permit+reflect - -| tc20-150B-2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-aclreflect-pdrdisc -| | [Tags] | 150B | 2C | PDRDISC | ACL_PERMIT_REFLECT -| | phy_cores=${2} | pkt_framesize=${150} | search_type=PDR -| | ... | acl_type=permit+reflect - -| tc21-200B-2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-aclreflect-ndrdisc -| | [Tags] | 200B | 2C | NDRDISC | ACL_PERMIT_REFLECT -| | phy_cores=${2} | pkt_framesize=${200} | search_type=NDR -| | ... | acl_type=permit+reflect - -| tc22-200B-2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-aclreflect-pdrdisc -| | [Tags] | 200B | 2C | PDRDISC | ACL_PERMIT_REFLECT -| | phy_cores=${2} | pkt_framesize=${200} | search_type=PDR -| | ... | acl_type=permit+reflect - -| tc23-IMIX-2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-aclreflect-ndrdisc -| | [Tags] | IMIX | 2C | NDRDISC | ACL_PERMIT_REFLECT -| | phy_cores=${2} | pkt_framesize=IMIX_v4_1 | search_type=NDR -| | ... | acl_type=permit+reflect - -| tc24-IMIX-2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-aclreflect-pdrdisc -| | [Tags] | IMIX | 2C | PDRDISC | ACL_PERMIT_REFLECT -| | phy_cores=${2} | pkt_framesize=IMIX_v4_1 | search_type=PDR -| | ... | acl_type=permit+reflect diff --git a/tests/vpp/perf/vts/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-mrr.robot b/tests/vpp/perf/vts/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-mrr.robot new file mode 100644 index 0000000000..c4491f29e6 --- /dev/null +++ b/tests/vpp/perf/vts/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-mrr.robot @@ -0,0 +1,163 @@ +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| Library | resources.libraries.python.QemuUtils +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR +| ... | NIC_Intel-X520-DA2 | L2BDMACLRN | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY +| ... | VHOST | VM | VHOST_1024 | VTS | ACL_PERMIT +| ... +| Suite Setup | Run Keywords +| ... | Set up 3-node performance topology with DUT's NIC model +| ... | L3 | Intel-X520-DA2 +| ... | AND | Set up performance test suite with ACL +| Suite Teardown | Tear down 3-node performance topology +| ... +| Test Setup | Set up performance test +| Test Teardown | Tear down mrr test with vhost and VM with dpdk-testpmd and ACL +| ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} +| ... +| Test Template | Local Template +| ... +| Documentation | *Raw results L2BD test cases with VXLANoIPv4 and vhost* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. +| ... | Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUT1 and DUT2. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge- +| ... | domain and MAC learning enabled. Qemu Guest is connected to VPP via +| ... | vhost-user interfaces. Guest is running DPDK testpmd interconnecting +| ... | vhost-user interfaces using 5 cores pinned to cpus 5-9 and 2048M +| ... | memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores +| ... | (1 main core and 4 cores dedicated for io), forwarding mode is set to +| ... | io, rxd/txd=256, burst=64. DUT1, DUT2 are tested with 2p10GE NIC X520 +| ... | Niantic by Intel. +| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic +| ... | at line rate and reports total received/sent packets over trial period. +| ... | Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, 253 flows per flow-group) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static +| ... | payload. MAC addresses are matching MAC addresses of the TG node +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348. + +*** Variables *** +| ${perf_qemu_qsz}= | 1024 +# X520-DA2 bandwidth limit +| ${s_limit}= | ${10000000000} +| ${overhead}= | ${50} +# Socket names +| ${dut1_bd_id1}= | 1 +| ${dut1_bd_id2}= | 2 +| ${dut2_bd_id1}= | 1 +| ${sock1}= | /tmp/sock-1-${dut1_bd_id1} +| ${sock2}= | /tmp/sock-1-${dut1_bd_id2} +# Traffic profile: +| ${traffic_profile} | trex-sl-ethip4-vxlansrc253 + +| ${acl_type}= | permit + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ +| | ... | trial throughput test. +| | ... +| | ... | *Arguments:* +| | ... | - framesize - L2 Frame Size [B]. Type: integer +| | ... | - phy_cores - Number of worker threads to be used. Type: integer +| | ... | - rxq - Number of Rx queues to be used. Type: integer +| | ... | - acl_type - FIXME. +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | Add PCI devices to all DUTs +| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg +| | ... | ${s_limit} | ${framesize} | overhead=${overhead} +| | And Apply startup configuration on all VPP DUTs +| | &{vxlan1} = | Create Dictionary | vni=24 | vtep=172.17.0.2 +| | &{vxlan2} = | Create Dictionary | vni=24 | vtep=172.27.0.2 +| | @{dut1_vxlans} = | Create List | ${vxlan1} +| | @{dut2_vxlans} = | Create List | ${vxlan2} +| | Set interfaces in path in 3-node circular topology up +| | Configure vhost interfaces for L2BD forwarding | ${dut1} +| | ... | ${sock1} | ${sock2} +| | When Init L2 bridge domains with single DUT with Vhost-User and VXLANoIPv4 in 3-node circular topology +| | ... | 172.16.0.1 | 16 | 172.26.0.1 | 16 | 172.16.0.2 | 172.26.0.2 +| | ... | ${dut1_vxlans} | ${dut2_vxlans} | 172.17.0.0 | 16 | 172.27.0.0 | 16 +| | @{permit_list} = | Create List | 10.0.0.1/32 | 10.0.0.2/32 +| | Run Keyword If | '${acl_type}' != '${EMPTY}' +| | ... | Configure ACLs on a single interface | ${dut1} | ${dut1_if2} | input +| | ... | ${acl_type} | @{permit_list} +| | ${vm1} = | And Configure guest VM with dpdk-testpmd connected via vhost-user +| | ... | ${dut1} | ${sock1} | ${sock2} | DUT1_VM1 +| | ... | jumbo_frames=${jumbo} +| | Set Test Variable | &{dut1_vm_refs} | DUT1_VM1=${vm1} +| | Then Traffic should pass with maximum rate +| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} + +*** Test Cases *** +| tc01-114B-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-mrr +| | [Tags] | 114B | 1C +| | framesize=${114} | phy_cores=${1} + +| tc02-114B-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-mrr +| | [Tags] | 114B | 2C +| | framesize=${114} | phy_cores=${2} + +| tc03-114B-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-mrr +| | [Tags] | 114B | 4C +| | framesize=${114} | phy_cores=${4} + +| tc04-1518B-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-mrr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} + +| tc05-1518B-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-mrr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} + +| tc06-1518B-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-mrr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} + +| tc07-9000B-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-mrr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} + +| tc08-9000B-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-mrr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} + +| tc09-9000B-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-mrr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-mrr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-mrr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-mrr +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/vts/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vts/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr.robot new file mode 100644 index 0000000000..6aa5a8370f --- /dev/null +++ b/tests/vpp/perf/vts/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr.robot @@ -0,0 +1,170 @@ +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| Library | resources.libraries.python.QemuUtils +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X520-DA2 | L2BDMACLRN | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY +| ... | VHOST | VM | VHOST_1024 | VTS | ACL_PERMIT +| ... +| Suite Setup | Run Keywords +| ... | Set up 3-node performance topology with DUT's NIC model +| ... | L3 | Intel-X520-DA2 +| ... | AND | Set up performance test suite with ACL +| Suite Teardown | Tear down 3-node performance topology +| ... +| Test Setup | Set up performance test +| Test Teardown | Tear down performance test with vhost and VM with dpdk-testpmd and ACL +| ... | ${min_rate}pps | ${framesize} | ${traffic_profile} +| ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} +| ... +| Test Template | Local Template +| ... +| Documentation | *RFC2544: Packet throughput L2BD test cases with VXLANoIPv4 +| ... | and vhost* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. +| ... | Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUT1 and DUT2. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge- +| ... | domain and MAC learning enabled. Qemu Guest is connected to VPP via +| ... | vhost-user interfaces. Guest is running DPDK testpmd interconnecting +| ... | vhost-user interfaces using 5 cores pinned to cpus 5-9 and 2048M +| ... | memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores +| ... | (1 main core and 4 cores dedicated for io), forwarding mode is set to +| ... | io, rxd/txd=256, burst=64. DUT1, DUT2 are tested with 2p10GE NIC X520 +| ... | Niantic by Intel. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop +| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage +| ... | of packets transmitted. NDR and PDR are discovered for different +| ... | Ethernet L2 frame sizes using MLRsearch library. +| ... | Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, 253 flows per flow-group) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static +| ... | payload. MAC addresses are matching MAC addresses of the TG node +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348. + +*** Variables *** +| ${perf_qemu_qsz}= | 1024 +# X520-DA2 bandwidth limit +| ${s_limit}= | ${10000000000} +| ${overhead}= | ${50} +# Socket names +| ${dut1_bd_id1}= | 1 +| ${dut1_bd_id2}= | 2 +| ${dut2_bd_id1}= | 1 +| ${sock1}= | /tmp/sock-1-${dut1_bd_id1} +| ${sock2}= | /tmp/sock-1-${dut1_bd_id2} +# Traffic profile: +| ${traffic_profile} | trex-sl-ethip4-vxlansrc253 +| ${min_rate}= | ${10000} + +| ${acl_type}= | permit + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm. +| | ... +| | ... | *Arguments:* +| | ... | - framesize - L2 Frame Size [B]. Type: integer +| | ... | - phy_cores - Number of worker threads to be used. Type: integer +| | ... | - rxq - Number of Rx queues to be used. Type: integer +| | ... | - acl_type - FIXME. +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | ${framesize} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | Add PCI devices to all DUTs +| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg +| | ... | ${s_limit} | ${framesize} | overhead=${overhead} +| | And Apply startup configuration on all VPP DUTs +| | &{vxlan1} = | Create Dictionary | vni=24 | vtep=172.17.0.2 +| | &{vxlan2} = | Create Dictionary | vni=24 | vtep=172.27.0.2 +| | @{dut1_vxlans} = | Create List | ${vxlan1} +| | @{dut2_vxlans} = | Create List | ${vxlan2} +| | Set interfaces in path in 3-node circular topology up +| | Configure vhost interfaces for L2BD forwarding | ${dut1} +| | ... | ${sock1} | ${sock2} +| | When Init L2 bridge domains with single DUT with Vhost-User and VXLANoIPv4 in 3-node circular topology +| | ... | 172.16.0.1 | 16 | 172.26.0.1 | 16 | 172.16.0.2 | 172.26.0.2 +| | ... | ${dut1_vxlans} | ${dut2_vxlans} | 172.17.0.0 | 16 | 172.27.0.0 | 16 +| | @{permit_list} = | Create List | 10.0.0.1/32 | 10.0.0.2/32 +| | Run Keyword If | '${acl_type}' != '${EMPTY}' +| | ... | Configure ACLs on a single interface | ${dut1} | ${dut1_if2} | input +| | ... | ${acl_type} | @{permit_list} +| | ${vm1} = | And Configure guest VM with dpdk-testpmd connected via vhost-user +| | ... | ${dut1} | ${sock1} | ${sock2} | DUT1_VM1 +| | ... | jumbo_frames=${jumbo} +| | Set Test Variable | &{dut1_vm_refs} | DUT1_VM1=${vm1} +| | Then Find NDR and PDR intervals using optimized search +| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} + +*** Test Cases *** +| tc01-114B-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr +| | [Tags] | 114B | 1C +| | framesize=${114} | phy_cores=${1} + +| tc02-114B-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr +| | [Tags] | 114B | 2C +| | framesize=${114} | phy_cores=${2} + +| tc03-114B-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr +| | [Tags] | 114B | 4C +| | framesize=${114} | phy_cores=${4} + +| tc04-1518B-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} + +| tc05-1518B-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} + +| tc06-1518B-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} + +| tc07-9000B-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} + +| tc08-9000B-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} + +| tc09-9000B-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/vts/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-mrr.robot b/tests/vpp/perf/vts/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-mrr.robot new file mode 100644 index 0000000000..ff476a49aa --- /dev/null +++ b/tests/vpp/perf/vts/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-mrr.robot @@ -0,0 +1,163 @@ +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| Library | resources.libraries.python.QemuUtils +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR +| ... | NIC_Intel-X520-DA2 | L2BDMACLRN | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY +| ... | VHOST | VM | VHOST_1024 | VTS | ACL_PERMIT_REFLECT +| ... +| Suite Setup | Run Keywords +| ... | Set up 3-node performance topology with DUT's NIC model +| ... | L3 | Intel-X520-DA2 +| ... | AND | Set up performance test suite with ACL +| Suite Teardown | Tear down 3-node performance topology +| ... +| Test Setup | Set up performance test +| Test Teardown | Tear down mrr test with vhost and VM with dpdk-testpmd and ACL +| ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} +| ... +| Test Template | Local Template +| ... +| Documentation | *Raw results L2BD test cases with VXLANoIPv4 and vhost* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. +| ... | Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUT1 and DUT2. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge- +| ... | domain and MAC learning enabled. Qemu Guest is connected to VPP via +| ... | vhost-user interfaces. Guest is running DPDK testpmd interconnecting +| ... | vhost-user interfaces using 5 cores pinned to cpus 5-9 and 2048M +| ... | memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores +| ... | (1 main core and 4 cores dedicated for io), forwarding mode is set to +| ... | io, rxd/txd=256, burst=64. DUT1, DUT2 are tested with 2p10GE NIC X520 +| ... | Niantic by Intel. +| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic +| ... | at line rate and reports total received/sent packets over trial period. +| ... | Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, 253 flows per flow-group) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static +| ... | payload. MAC addresses are matching MAC addresses of the TG node +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348. + +*** Variables *** +| ${perf_qemu_qsz}= | 1024 +# X520-DA2 bandwidth limit +| ${s_limit}= | ${10000000000} +| ${overhead}= | ${50} +# Socket names +| ${dut1_bd_id1}= | 1 +| ${dut1_bd_id2}= | 2 +| ${dut2_bd_id1}= | 1 +| ${sock1}= | /tmp/sock-1-${dut1_bd_id1} +| ${sock2}= | /tmp/sock-1-${dut1_bd_id2} +# Traffic profile: +| ${traffic_profile} | trex-sl-ethip4-vxlansrc253 + +| ${acl_type}= | permit+reflect + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ +| | ... | trial throughput test. +| | ... +| | ... | *Arguments:* +| | ... | - framesize - L2 Frame Size [B]. Type: integer +| | ... | - phy_cores - Number of worker threads to be used. Type: integer +| | ... | - rxq - Number of Rx queues to be used. Type: integer +| | ... | - acl_type - FIXME. +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | Add PCI devices to all DUTs +| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg +| | ... | ${s_limit} | ${framesize} | overhead=${overhead} +| | And Apply startup configuration on all VPP DUTs +| | &{vxlan1} = | Create Dictionary | vni=24 | vtep=172.17.0.2 +| | &{vxlan2} = | Create Dictionary | vni=24 | vtep=172.27.0.2 +| | @{dut1_vxlans} = | Create List | ${vxlan1} +| | @{dut2_vxlans} = | Create List | ${vxlan2} +| | Set interfaces in path in 3-node circular topology up +| | Configure vhost interfaces for L2BD forwarding | ${dut1} +| | ... | ${sock1} | ${sock2} +| | When Init L2 bridge domains with single DUT with Vhost-User and VXLANoIPv4 in 3-node circular topology +| | ... | 172.16.0.1 | 16 | 172.26.0.1 | 16 | 172.16.0.2 | 172.26.0.2 +| | ... | ${dut1_vxlans} | ${dut2_vxlans} | 172.17.0.0 | 16 | 172.27.0.0 | 16 +| | @{permit_list} = | Create List | 10.0.0.1/32 | 10.0.0.2/32 +| | Run Keyword If | '${acl_type}' != '${EMPTY}' +| | ... | Configure ACLs on a single interface | ${dut1} | ${dut1_if2} | input +| | ... | ${acl_type} | @{permit_list} +| | ${vm1} = | And Configure guest VM with dpdk-testpmd connected via vhost-user +| | ... | ${dut1} | ${sock1} | ${sock2} | DUT1_VM1 +| | ... | jumbo_frames=${jumbo} +| | Set Test Variable | &{dut1_vm_refs} | DUT1_VM1=${vm1} +| | Then Traffic should pass with maximum rate +| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} + +*** Test Cases *** +| tc01-114B-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-mrr +| | [Tags] | 114B | 1C +| | framesize=${114} | phy_cores=${1} + +| tc02-114B-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-mrr +| | [Tags] | 114B | 2C +| | framesize=${114} | phy_cores=${2} + +| tc03-114B-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-mrr +| | [Tags] | 114B | 4C +| | framesize=${114} | phy_cores=${4} + +| tc04-1518B-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-mrr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} + +| tc05-1518B-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-mrr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} + +| tc06-1518B-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-mrr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} + +| tc07-9000B-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-mrr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} + +| tc08-9000B-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-mrr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} + +| tc09-9000B-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-mrr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-mrr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-mrr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-mrr +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/vts/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vts/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-ndrpdr.robot new file mode 100644 index 0000000000..69b6691e47 --- /dev/null +++ b/tests/vpp/perf/vts/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-ndrpdr.robot @@ -0,0 +1,170 @@ +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| Library | resources.libraries.python.QemuUtils +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X520-DA2 | L2BDMACLRN | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY +| ... | VHOST | VM | VHOST_1024 | VTS | ACL_PERMIT_REFLECT +| ... +| Suite Setup | Run Keywords +| ... | Set up 3-node performance topology with DUT's NIC model +| ... | L3 | Intel-X520-DA2 +| ... | AND | Set up performance test suite with ACL +| Suite Teardown | Tear down 3-node performance topology +| ... +| Test Setup | Set up performance test +| Test Teardown | Tear down performance test with vhost and VM with dpdk-testpmd and ACL +| ... | ${min_rate}pps | ${framesize} | ${traffic_profile} +| ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} +| ... +| Test Template | Local Template +| ... +| Documentation | *RFC2544: Packet throughput L2BD test cases with VXLANoIPv4 +| ... | and vhost* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. +| ... | Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUT1 and DUT2. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge- +| ... | domain and MAC learning enabled. Qemu Guest is connected to VPP via +| ... | vhost-user interfaces. Guest is running DPDK testpmd interconnecting +| ... | vhost-user interfaces using 5 cores pinned to cpus 5-9 and 2048M +| ... | memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores +| ... | (1 main core and 4 cores dedicated for io), forwarding mode is set to +| ... | io, rxd/txd=256, burst=64. DUT1, DUT2 are tested with 2p10GE NIC X520 +| ... | Niantic by Intel. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop +| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage +| ... | of packets transmitted. NDR and PDR are discovered for different +| ... | Ethernet L2 frame sizes using MLRsearch library. +| ... | Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, 253 flows per flow-group) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static +| ... | payload. MAC addresses are matching MAC addresses of the TG node +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348. + +*** Variables *** +| ${perf_qemu_qsz}= | 1024 +# X520-DA2 bandwidth limit +| ${s_limit}= | ${10000000000} +| ${overhead}= | ${50} +# Socket names +| ${dut1_bd_id1}= | 1 +| ${dut1_bd_id2}= | 2 +| ${dut2_bd_id1}= | 1 +| ${sock1}= | /tmp/sock-1-${dut1_bd_id1} +| ${sock2}= | /tmp/sock-1-${dut1_bd_id2} +# Traffic profile: +| ${traffic_profile} | trex-sl-ethip4-vxlansrc253 +| ${min_rate}= | ${10000} + +| ${acl_type}= | permit+reflect + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm. +| | ... +| | ... | *Arguments:* +| | ... | - framesize - L2 Frame Size [B]. Type: integer +| | ... | - phy_cores - Number of worker threads to be used. Type: integer +| | ... | - rxq - Number of Rx queues to be used. Type: integer +| | ... | - acl_type - FIXME. +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | ${framesize} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | Add PCI devices to all DUTs +| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg +| | ... | ${s_limit} | ${framesize} | overhead=${overhead} +| | And Apply startup configuration on all VPP DUTs +| | &{vxlan1} = | Create Dictionary | vni=24 | vtep=172.17.0.2 +| | &{vxlan2} = | Create Dictionary | vni=24 | vtep=172.27.0.2 +| | @{dut1_vxlans} = | Create List | ${vxlan1} +| | @{dut2_vxlans} = | Create List | ${vxlan2} +| | Set interfaces in path in 3-node circular topology up +| | Configure vhost interfaces for L2BD forwarding | ${dut1} +| | ... | ${sock1} | ${sock2} +| | When Init L2 bridge domains with single DUT with Vhost-User and VXLANoIPv4 in 3-node circular topology +| | ... | 172.16.0.1 | 16 | 172.26.0.1 | 16 | 172.16.0.2 | 172.26.0.2 +| | ... | ${dut1_vxlans} | ${dut2_vxlans} | 172.17.0.0 | 16 | 172.27.0.0 | 16 +| | @{permit_list} = | Create List | 10.0.0.1/32 | 10.0.0.2/32 +| | Run Keyword If | '${acl_type}' != '${EMPTY}' +| | ... | Configure ACLs on a single interface | ${dut1} | ${dut1_if2} | input +| | ... | ${acl_type} | @{permit_list} +| | ${vm1} = | And Configure guest VM with dpdk-testpmd connected via vhost-user +| | ... | ${dut1} | ${sock1} | ${sock2} | DUT1_VM1 +| | ... | jumbo_frames=${jumbo} +| | Set Test Variable | &{dut1_vm_refs} | DUT1_VM1=${vm1} +| | Then Find NDR and PDR intervals using optimized search +| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} + +*** Test Cases *** +| tc01-114B-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-ndrpdr +| | [Tags] | 114B | 1C +| | framesize=${114} | phy_cores=${1} + +| tc02-114B-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-ndrpdr +| | [Tags] | 114B | 2C +| | framesize=${114} | phy_cores=${2} + +| tc03-114B-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-ndrpdr +| | [Tags] | 114B | 4C +| | framesize=${114} | phy_cores=${4} + +| tc04-1518B-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-ndrpdr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} + +| tc05-1518B-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-ndrpdr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} + +| tc06-1518B-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-ndrpdr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} + +| tc07-9000B-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-ndrpdr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} + +| tc08-9000B-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-ndrpdr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} + +| tc09-9000B-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-ndrpdr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-ndrpdr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-ndrpdr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-ndrpdr +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/vts/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-mrr.robot b/tests/vpp/perf/vts/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-mrr.robot new file mode 100644 index 0000000000..4f055cbbf5 --- /dev/null +++ b/tests/vpp/perf/vts/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-mrr.robot @@ -0,0 +1,163 @@ +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| Library | resources.libraries.python.QemuUtils +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR +| ... | NIC_Intel-X520-DA2 | L2BDMACLRN | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY +| ... | VHOST | VM | VHOST_1024 | VTS +| ... +| Suite Setup | Run Keywords +| ... | Set up 3-node performance topology with DUT's NIC model +| ... | L3 | Intel-X520-DA2 +| ... | AND | Set up performance test suite with ACL +| Suite Teardown | Tear down 3-node performance topology +| ... +| Test Setup | Set up performance test +| Test Teardown | Tear down mrr test with vhost and VM with dpdk-testpmd and ACL +| ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} +| ... +| Test Template | Local Template +| ... +| Documentation | *Raw results L2BD test cases with VXLANoIPv4 and vhost* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. +| ... | Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUT1 and DUT2. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge- +| ... | domain and MAC learning enabled. Qemu Guest is connected to VPP via +| ... | vhost-user interfaces. Guest is running DPDK testpmd interconnecting +| ... | vhost-user interfaces using 5 cores pinned to cpus 5-9 and 2048M +| ... | memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores +| ... | (1 main core and 4 cores dedicated for io), forwarding mode is set to +| ... | io, rxd/txd=256, burst=64. DUT1, DUT2 are tested with 2p10GE NIC X520 +| ... | Niantic by Intel. +| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic +| ... | at line rate and reports total received/sent packets over trial period. +| ... | Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, 253 flows per flow-group) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static +| ... | payload. MAC addresses are matching MAC addresses of the TG node +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348. + +*** Variables *** +| ${perf_qemu_qsz}= | 1024 +# X520-DA2 bandwidth limit +| ${s_limit}= | ${10000000000} +| ${overhead}= | ${50} +# Socket names +| ${dut1_bd_id1}= | 1 +| ${dut1_bd_id2}= | 2 +| ${dut2_bd_id1}= | 1 +| ${sock1}= | /tmp/sock-1-${dut1_bd_id1} +| ${sock2}= | /tmp/sock-1-${dut1_bd_id2} +# Traffic profile: +| ${traffic_profile} | trex-sl-ethip4-vxlansrc253 + +| ${acl_type}= | ${EMPTY} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ +| | ... | trial throughput test. +| | ... +| | ... | *Arguments:* +| | ... | - framesize - L2 Frame Size [B]. Type: integer +| | ... | - phy_cores - Number of worker threads to be used. Type: integer +| | ... | - rxq - Number of Rx queues to be used. Type: integer +| | ... | - acl_type - FIXME. +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | Add PCI devices to all DUTs +| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg +| | ... | ${s_limit} | ${framesize} | overhead=${overhead} +| | And Apply startup configuration on all VPP DUTs +| | &{vxlan1} = | Create Dictionary | vni=24 | vtep=172.17.0.2 +| | &{vxlan2} = | Create Dictionary | vni=24 | vtep=172.27.0.2 +| | @{dut1_vxlans} = | Create List | ${vxlan1} +| | @{dut2_vxlans} = | Create List | ${vxlan2} +| | Set interfaces in path in 3-node circular topology up +| | Configure vhost interfaces for L2BD forwarding | ${dut1} +| | ... | ${sock1} | ${sock2} +| | When Init L2 bridge domains with single DUT with Vhost-User and VXLANoIPv4 in 3-node circular topology +| | ... | 172.16.0.1 | 16 | 172.26.0.1 | 16 | 172.16.0.2 | 172.26.0.2 +| | ... | ${dut1_vxlans} | ${dut2_vxlans} | 172.17.0.0 | 16 | 172.27.0.0 | 16 +| | @{permit_list} = | Create List | 10.0.0.1/32 | 10.0.0.2/32 +| | Run Keyword If | '${acl_type}' != '${EMPTY}' +| | ... | Configure ACLs on a single interface | ${dut1} | ${dut1_if2} | input +| | ... | ${acl_type} | @{permit_list} +| | ${vm1} = | And Configure guest VM with dpdk-testpmd connected via vhost-user +| | ... | ${dut1} | ${sock1} | ${sock2} | DUT1_VM1 +| | ... | jumbo_frames=${jumbo} +| | Set Test Variable | &{dut1_vm_refs} | DUT1_VM1=${vm1} +| | Then Traffic should pass with maximum rate +| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} + +*** Test Cases *** +| tc01-114B-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-mrr +| | [Tags] | 114B | 1C +| | framesize=${114} | phy_cores=${1} + +| tc02-114B-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-mrr +| | [Tags] | 114B | 2C +| | framesize=${114} | phy_cores=${2} + +| tc03-114B-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-mrr +| | [Tags] | 114B | 4C +| | framesize=${114} | phy_cores=${4} + +| tc04-1518B-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-mrr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} + +| tc05-1518B-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-mrr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} + +| tc06-1518B-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-mrr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} + +| tc07-9000B-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-mrr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} + +| tc08-9000B-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-mrr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} + +| tc09-9000B-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-mrr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-mrr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-mrr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-mrr +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/vts/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vts/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-ndrpdr.robot new file mode 100644 index 0000000000..e24218a4f1 --- /dev/null +++ b/tests/vpp/perf/vts/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-ndrpdr.robot @@ -0,0 +1,170 @@ +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| Library | resources.libraries.python.QemuUtils +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X520-DA2 | L2BDMACLRN | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY +| ... | VHOST | VM | VHOST_1024 | VTS +| ... +| Suite Setup | Run Keywords +| ... | Set up 3-node performance topology with DUT's NIC model +| ... | L3 | Intel-X520-DA2 +| ... | AND | Set up performance test suite with ACL +| Suite Teardown | Tear down 3-node performance topology +| ... +| Test Setup | Set up performance test +| Test Teardown | Tear down performance test with vhost and VM with dpdk-testpmd and ACL +| ... | ${min_rate}pps | ${framesize} | ${traffic_profile} +| ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} +| ... +| Test Template | Local Template +| ... +| Documentation | *RFC2544: Packet throughput L2BD test cases with VXLANoIPv4 +| ... | and vhost* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. +| ... | Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUT1 and DUT2. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge- +| ... | domain and MAC learning enabled. Qemu Guest is connected to VPP via +| ... | vhost-user interfaces. Guest is running DPDK testpmd interconnecting +| ... | vhost-user interfaces using 5 cores pinned to cpus 5-9 and 2048M +| ... | memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores +| ... | (1 main core and 4 cores dedicated for io), forwarding mode is set to +| ... | io, rxd/txd=256, burst=64. DUT1, DUT2 are tested with 2p10GE NIC X520 +| ... | Niantic by Intel. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop +| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage +| ... | of packets transmitted. NDR and PDR are discovered for different +| ... | Ethernet L2 frame sizes using MLRsearch library. +| ... | Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, 253 flows per flow-group) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static +| ... | payload. MAC addresses are matching MAC addresses of the TG node +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348. + +*** Variables *** +| ${perf_qemu_qsz}= | 1024 +# X520-DA2 bandwidth limit +| ${s_limit}= | ${10000000000} +| ${overhead}= | ${50} +# Socket names +| ${dut1_bd_id1}= | 1 +| ${dut1_bd_id2}= | 2 +| ${dut2_bd_id1}= | 1 +| ${sock1}= | /tmp/sock-1-${dut1_bd_id1} +| ${sock2}= | /tmp/sock-1-${dut1_bd_id2} +# Traffic profile: +| ${traffic_profile} | trex-sl-ethip4-vxlansrc253 +| ${min_rate}= | ${10000} + +| ${acl_type}= | ${EMPTY} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm. +| | ... +| | ... | *Arguments:* +| | ... | - framesize - L2 Frame Size [B]. Type: integer +| | ... | - phy_cores - Number of worker threads to be used. Type: integer +| | ... | - rxq - Number of Rx queues to be used. Type: integer +| | ... | - acl_type - FIXME. +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | ${framesize} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | Add PCI devices to all DUTs +| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg +| | ... | ${s_limit} | ${framesize} | overhead=${overhead} +| | And Apply startup configuration on all VPP DUTs +| | &{vxlan1} = | Create Dictionary | vni=24 | vtep=172.17.0.2 +| | &{vxlan2} = | Create Dictionary | vni=24 | vtep=172.27.0.2 +| | @{dut1_vxlans} = | Create List | ${vxlan1} +| | @{dut2_vxlans} = | Create List | ${vxlan2} +| | Set interfaces in path in 3-node circular topology up +| | Configure vhost interfaces for L2BD forwarding | ${dut1} +| | ... | ${sock1} | ${sock2} +| | When Init L2 bridge domains with single DUT with Vhost-User and VXLANoIPv4 in 3-node circular topology +| | ... | 172.16.0.1 | 16 | 172.26.0.1 | 16 | 172.16.0.2 | 172.26.0.2 +| | ... | ${dut1_vxlans} | ${dut2_vxlans} | 172.17.0.0 | 16 | 172.27.0.0 | 16 +| | @{permit_list} = | Create List | 10.0.0.1/32 | 10.0.0.2/32 +| | Run Keyword If | '${acl_type}' != '${EMPTY}' +| | ... | Configure ACLs on a single interface | ${dut1} | ${dut1_if2} | input +| | ... | ${acl_type} | @{permit_list} +| | ${vm1} = | And Configure guest VM with dpdk-testpmd connected via vhost-user +| | ... | ${dut1} | ${sock1} | ${sock2} | DUT1_VM1 +| | ... | jumbo_frames=${jumbo} +| | Set Test Variable | &{dut1_vm_refs} | DUT1_VM1=${vm1} +| | Then Find NDR and PDR intervals using optimized search +| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} + +*** Test Cases *** +| tc01-114B-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-ndrpdr +| | [Tags] | 114B | 1C +| | framesize=${114} | phy_cores=${1} + +| tc02-114B-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-ndrpdr +| | [Tags] | 114B | 2C +| | framesize=${114} | phy_cores=${2} + +| tc03-114B-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-ndrpdr +| | [Tags] | 114B | 4C +| | framesize=${114} | phy_cores=${4} + +| tc04-1518B-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-ndrpdr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} + +| tc05-1518B-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-ndrpdr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} + +| tc06-1518B-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-ndrpdr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} + +| tc07-9000B-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-ndrpdr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} + +| tc08-9000B-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-ndrpdr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} + +| tc09-9000B-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-ndrpdr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-ndrpdr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-ndrpdr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-ndrpdr +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/vts/regenerate_testcases.py b/tests/vpp/perf/vts/regenerate_testcases.py new file mode 100755 index 0000000000..adfde89b5c --- /dev/null +++ b/tests/vpp/perf/vts/regenerate_testcases.py @@ -0,0 +1,18 @@ +#!/usr/bin/env python + +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +from resources.libraries.python.autogen.Regenerator import Regenerator + +Regenerator().regenerate_glob("*.robot", protocol="vxlan+ip4") |