diff options
Diffstat (limited to 'tests/vpp/perf')
24 files changed, 1734 insertions, 162 deletions
diff --git a/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale200k-mrr.robot b/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale200k-mrr.robot index 5b4c2fce2f..9b63b9623b 100644 --- a/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale200k-mrr.robot +++ b/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale200k-mrr.robot @@ -29,21 +29,20 @@ | ... | Documentation | *Raw results IPv6 routing test cases* | ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ | ... | with single links between nodes. | ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6 -| ... | routing and 2x100k static IPv6 /64 route entries. DUT1 and DUT2 tested +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\ +| ... | routing and 2x100k static IPv6 /64 route entries. DUT1 and DUT2 tested\ | ... | with 2p10GE NIC X520 Niantic by Intel. | ... | *[Ver] TG verification:* In MaxReceivedRate tests TG sends traffic\ | ... | at line rate and reports total received/sent packets over trial period.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 100k flows per flow-group) with all packets -| ... | containing Ethernet header, IPv6 header withq IP and static payload. -| ... | MAC addresses are matching MAC addresses of the TG node interfaces. -| ... | Incrementing of IP.dst (IPv6 destination address) field is applied to -| ... | both streams. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ +| ... | contains two L3 flow-groups (flow-group per direction, 100k flows per\ +| ... | flow-group) with all packets containing Ethernet header, IPv6 header\ +| ... | with IP and static payload. MAC addresses are matching MAC addresses\ +| ... | of the TG node interfaces. Incrementing of IP.dst (IPv6 destination\ +| ... | address) field is applied to both streams. | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** @@ -74,7 +73,7 @@ | | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg | | ... | ${s_limit} | ${framesize} | | And Apply startup configuration on all VPP DUTs -| | When Initialize IPv6 forwarding with scaling in 3-node circular topology +| | When Initialize IPv6 forwarding with scaling in circular topology | | ... | ${rts_per_flow} | | Then Traffic should pass with maximum rate | | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} diff --git a/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale200k-ndrpdr.robot b/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale200k-ndrpdr.robot index 525988605c..ca64d4852d 100644 --- a/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale200k-ndrpdr.robot +++ b/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale200k-ndrpdr.robot @@ -30,24 +30,23 @@ | ... | Documentation | *RFC2544: Pkt throughput IPv6 routing test cases* | ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ | ... | with single links between nodes. | ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6 -| ... | routing and 2x100k static IPv6 /64 route entries. DUT1 and DUT2 tested +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\ +| ... | routing and 2x100k static IPv6 /64 route entries. DUT1 and DUT2 tested\ | ... | with 2p10GE NIC X520 Niantic by Intel. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage -| ... | of packets transmitted. NDR and PDR are discovered for different -| ... | Ethernet L2 frame sizes using MLRsearch library. -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 100k flows per flow-group) with all packets -| ... | containing Ethernet header, IPv6 header withq IP and static payload. -| ... | MAC addresses are matching MAC addresses of the TG node interfaces. -| ... | Incrementing of IP.dst (IPv6 destination address) field is applied to -| ... | both streams. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ +| ... | contains two L3 flow-groups (flow-group per direction, 100k flows per\ +| ... | flow-group) with all packets containing Ethernet header, IPv6 header\ +| ... | with IP and static payload. MAC addresses are matching MAC addresses\ +| ... | of the TG node interfaces. Incrementing of IP.dst (IPv6 destination\ +| ... | address) field is applied to both streams. | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** @@ -80,7 +79,7 @@ | | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg | | ... | ${s_limit} | ${framesize} | | And Apply startup configuration on all VPP DUTs -| | When Initialize IPv6 forwarding with scaling in 3-node circular topology +| | When Initialize IPv6 forwarding with scaling in circular topology | | ... | ${rts_per_flow} | | Then Find NDR and PDR intervals using optimized search | | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} diff --git a/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale20k-mrr.robot b/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale20k-mrr.robot index fe3ec9a008..812bad5c59 100644 --- a/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale20k-mrr.robot +++ b/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale20k-mrr.robot @@ -29,21 +29,20 @@ | ... | Documentation | *Raw results IPv6 routing test cases* | ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ | ... | with single links between nodes. | ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6 -| ... | routing and 2x10k static IPv6 /64 route entries. DUT1 and DUT2 tested +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\ +| ... | routing and 2x10k static IPv6 /64 route entries. DUT1 and DUT2 tested\ | ... | with 2p10GE NIC X520 Niantic by Intel. | ... | *[Ver] TG verification:* In MaxReceivedRate tests TG sends traffic\ | ... | at line rate and reports total received/sent packets over trial period.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 10k flows per flow-group) with all packets -| ... | containing Ethernet header, IPv6 header withq IP and static payload. -| ... | MAC addresses are matching MAC addresses of the TG node interfaces. -| ... | Incrementing of IP.dst (IPv6 destination address) field is applied to -| ... | both streams. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ +| ... | contains two L3 flow-groups (flow-group per direction, 10k flows per\ +| ... | flow-group) with all packets containing Ethernet header, IPv6 header\ +| ... | with IP and static payload. MAC addresses are matching MAC addresses\ +| ... | of the TG node interfaces. Incrementing of IP.dst (IPv6 destination\ +| ... | address) field is applied to both streams. | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** @@ -74,7 +73,7 @@ | | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg | | ... | ${s_limit} | ${framesize} | | And Apply startup configuration on all VPP DUTs -| | When Initialize IPv6 forwarding with scaling in 3-node circular topology +| | When Initialize IPv6 forwarding with scaling in circular topology | | ... | ${rts_per_flow} | | Then Traffic should pass with maximum rate | | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} diff --git a/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale20k-ndrpdr.robot b/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale20k-ndrpdr.robot index 58be692fab..96351413ac 100644 --- a/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale20k-ndrpdr.robot +++ b/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale20k-ndrpdr.robot @@ -30,24 +30,23 @@ | ... | Documentation | *RFC2544: Pkt throughput IPv6 routing test cases* | ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ | ... | with single links between nodes. | ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6 -| ... | routing and 2x10k static IPv6 /64 route entries. DUT1 and DUT2 tested +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\ +| ... | routing and 2x10k static IPv6 /64 route entries. DUT1 and DUT2 tested\ | ... | with 2p10GE NIC X520 Niantic by Intel. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage -| ... | of packets transmitted. NDR and PDR are discovered for different -| ... | Ethernet L2 frame sizes using MLRsearch library. -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 10k flows per flow-group) with all packets -| ... | containing Ethernet header, IPv6 header withq IP and static payload. -| ... | MAC addresses are matching MAC addresses of the TG node interfaces. -| ... | Incrementing of IP.dst (IPv6 destination address) field is applied to -| ... | both streams. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ +| ... | contains two L3 flow-groups (flow-group per direction, 10k flows per\ +| ... | flow-group) with all packets containing Ethernet header, IPv6 header\ +| ... | with IP and static payload. MAC addresses are matching MAC addresses\ +| ... | of the TG node interfaces. Incrementing of IP.dst (IPv6 destination\ +| ... | address) field is applied to both streams. | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** @@ -80,7 +79,7 @@ | | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg | | ... | ${s_limit} | ${framesize} | | And Apply startup configuration on all VPP DUTs -| | When Initialize IPv6 forwarding with scaling in 3-node circular topology +| | When Initialize IPv6 forwarding with scaling in circular topology | | ... | ${rts_per_flow} | | Then Find NDR and PDR intervals using optimized search | | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} diff --git a/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale2m-mrr.robot b/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale2m-mrr.robot index 4566ce354a..d75425a279 100644 --- a/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale2m-mrr.robot +++ b/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale2m-mrr.robot @@ -29,21 +29,20 @@ | ... | Documentation | *Raw results IPv6 routing test cases* | ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ | ... | with single links between nodes. | ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6 -| ... | routing and 2x1M static IPv6 /64 route entries. DUT1 and DUT2 tested +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\ +| ... | routing and 2x1M static IPv6 /64 route entries. DUT1 and DUT2 tested\ | ... | with 2p10GE NIC X520 Niantic by Intel. | ... | *[Ver] TG verification:* In MaxReceivedRate tests TG sends traffic\ | ... | at line rate and reports total received/sent packets over trial period.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 1M flows per flow-group) with all packets -| ... | containing Ethernet header, IPv6 header withq IP and static payload. -| ... | MAC addresses are matching MAC addresses of the TG node interfaces. -| ... | Incrementing of IP.dst (IPv6 destination address) field is applied to -| ... | both streams. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ +| ... | contains two L3 flow-groups (flow-group per direction, 1M flows per\ +| ... | flow-group) with all packets containing Ethernet header, IPv6 header\ +| ... | with IP and static payload. MAC addresses are matching MAC addresses\ +| ... | of the TG node interfaces. Incrementing of IP.dst (IPv6 destination\ +| ... | address) field is applied to both streams. | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** @@ -74,7 +73,7 @@ | | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg | | ... | ${s_limit} | ${framesize} | | And Apply startup configuration on all VPP DUTs -| | When Initialize IPv6 forwarding with scaling in 3-node circular topology +| | When Initialize IPv6 forwarding with scaling in circular topology | | ... | ${rts_per_flow} | | Then Traffic should pass with maximum rate | | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} diff --git a/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale2m-ndrpdr.robot b/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale2m-ndrpdr.robot index 8c3992ffe7..c869823484 100644 --- a/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale2m-ndrpdr.robot +++ b/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale2m-ndrpdr.robot @@ -30,24 +30,23 @@ | ... | Documentation | *RFC2544: Pkt throughput IPv6 routing test cases* | ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ | ... | with single links between nodes. | ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6 -| ... | routing and 2x1M static IPv6 /64 route entries. DUT1 and DUT2 tested +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\ +| ... | routing and 2x1M static IPv6 /64 route entries. DUT1 and DUT2 tested\ | ... | with 2p10GE NIC X520 Niantic by Intel. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage -| ... | of packets transmitted. NDR and PDR are discovered for different -| ... | Ethernet L2 frame sizes using MLRsearch library. -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 1M flows per flow-group) with all packets -| ... | containing Ethernet header, IPv6 header withq IP and static payload. -| ... | MAC addresses are matching MAC addresses of the TG node interfaces. -| ... | Incrementing of IP.dst (IPv6 destination address) field is applied to -| ... | both streams. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ +| ... | contains two L3 flow-groups (flow-group per direction, 1M flows per\ +| ... | flow-group) with all packets containing Ethernet header, IPv6 header\ +| ... | with IP and static payload. MAC addresses are matching MAC addresses\ +| ... | of the TG node interfaces. Incrementing of IP.dst (IPv6 destination\ +| ... | address) field is applied to both streams. | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** @@ -80,7 +79,7 @@ | | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg | | ... | ${s_limit} | ${framesize} | | And Apply startup configuration on all VPP DUTs -| | When Initialize IPv6 forwarding with scaling in 3-node circular topology +| | When Initialize IPv6 forwarding with scaling in circular topology | | ... | ${rts_per_flow} | | Then Find NDR and PDR intervals using optimized search | | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} diff --git a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale200k-mrr.robot b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale200k-mrr.robot index b4b0d1f802..bad2cd428b 100644 --- a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale200k-mrr.robot +++ b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale200k-mrr.robot @@ -29,21 +29,20 @@ | ... | Documentation | *Raw results IPv6 routing test cases* | ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ | ... | with single links between nodes. | ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6 -| ... | routing and 2x100k static IPv6 /64 route entries. DUT1 and DUT2 tested +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\ +| ... | routing and 2x100k static IPv6 /64 route entries. DUT1 and DUT2 tested\ | ... | with 2p10GE NIC X710 by Intel. | ... | *[Ver] TG verification:* In MaxReceivedRate tests TG sends traffic\ | ... | at line rate and reports total received/sent packets over trial period.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 100k flows per flow-group) with all packets -| ... | containing Ethernet header, IPv6 header withq IP and static payload. -| ... | MAC addresses are matching MAC addresses of the TG node interfaces. -| ... | Incrementing of IP.dst (IPv6 destination address) field is applied to -| ... | both streams. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ +| ... | contains two L3 flow-groups (flow-group per direction, 100k flows per\ +| ... | flow-group) with all packets containing Ethernet header, IPv6 header\ +| ... | with IP and static payload. MAC addresses are matching MAC addresses\ +| ... | of the TG node interfaces. Incrementing of IP.dst (IPv6 destination\ +| ... | address) field is applied to both streams. | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** @@ -74,7 +73,7 @@ | | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg | | ... | ${s_limit} | ${framesize} | | And Apply startup configuration on all VPP DUTs -| | When Initialize IPv6 forwarding with scaling in 3-node circular topology +| | When Initialize IPv6 forwarding with scaling in circular topology | | ... | ${rts_per_flow} | | Then Traffic should pass with maximum rate | | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} diff --git a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale200k-ndrpdr.robot b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale200k-ndrpdr.robot index da750ce3fa..c09e9fccfe 100644 --- a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale200k-ndrpdr.robot +++ b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale200k-ndrpdr.robot @@ -30,24 +30,23 @@ | ... | Documentation | *RFC2544: Pkt throughput IPv6 routing test cases* | ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ | ... | with single links between nodes. | ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6 -| ... | routing and 2x100k static IPv6 /64 route entries. DUT1 and DUT2 tested +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\ +| ... | routing and 2x100k static IPv6 /64 route entries. DUT1 and DUT2 tested\ | ... | with 2p10GE NIC X710 by Intel. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage -| ... | of packets transmitted. NDR and PDR are discovered for different -| ... | Ethernet L2 frame sizes using MLRsearch library. -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 100k flows per flow-group) with all packets -| ... | containing Ethernet header, IPv6 header withq IP and static payload. -| ... | MAC addresses are matching MAC addresses of the TG node interfaces. -| ... | Incrementing of IP.dst (IPv6 destination address) field is applied to -| ... | both streams. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ +| ... | contains two L3 flow-groups (flow-group per direction, 100k flows per\ +| ... | flow-group) with all packets containing Ethernet header, IPv6 header\ +| ... | with IP and static payload. MAC addresses are matching MAC addresses\ +| ... | of the TG node interfaces. Incrementing of IP.dst (IPv6 destination\ +| ... | address) field is applied to both streams. | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** @@ -80,7 +79,7 @@ | | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg | | ... | ${s_limit} | ${framesize} | | And Apply startup configuration on all VPP DUTs -| | When Initialize IPv6 forwarding with scaling in 3-node circular topology +| | When Initialize IPv6 forwarding with scaling in circular topology | | ... | ${rts_per_flow} | | Then Find NDR and PDR intervals using optimized search | | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} diff --git a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale20k-mrr.robot b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale20k-mrr.robot index 925359bd7b..6297072962 100644 --- a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale20k-mrr.robot +++ b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale20k-mrr.robot @@ -29,21 +29,20 @@ | ... | Documentation | *Raw results IPv6 routing test cases* | ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ | ... | with single links between nodes. | ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6 -| ... | routing and 2x10k static IPv6 /64 route entries. DUT1 and DUT2 tested +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\ +| ... | routing and 2x10k static IPv6 /64 route entries. DUT1 and DUT2 tested\ | ... | with 2p10GE NIC X710 by Intel. | ... | *[Ver] TG verification:* In MaxReceivedRate tests TG sends traffic\ | ... | at line rate and reports total received/sent packets over trial period.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 10k flows per flow-group) with all packets -| ... | containing Ethernet header, IPv6 header withq IP and static payload. -| ... | MAC addresses are matching MAC addresses of the TG node interfaces. -| ... | Incrementing of IP.dst (IPv6 destination address) field is applied to -| ... | both streams. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ +| ... | contains two L3 flow-groups (flow-group per direction, 10k flows per\ +| ... | flow-group) with all packets containing Ethernet header, IPv6 header\ +| ... | with IP and static payload. MAC addresses are matching MAC addresses\ +| ... | of the TG node interfaces. Incrementing of IP.dst (IPv6 destination\ +| ... | address) field is applied to both streams. | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** @@ -74,7 +73,7 @@ | | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg | | ... | ${s_limit} | ${framesize} | | And Apply startup configuration on all VPP DUTs -| | When Initialize IPv6 forwarding with scaling in 3-node circular topology +| | When Initialize IPv6 forwarding with scaling in circular topology | | ... | ${rts_per_flow} | | Then Traffic should pass with maximum rate | | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} diff --git a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale20k-ndrpdr.robot b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale20k-ndrpdr.robot index 6bae48e208..ee33166b07 100644 --- a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale20k-ndrpdr.robot +++ b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale20k-ndrpdr.robot @@ -30,24 +30,23 @@ | ... | Documentation | *RFC2544: Pkt throughput IPv6 routing test cases* | ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ | ... | with single links between nodes. | ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6 -| ... | routing and 2x10k static IPv6 /64 route entries. DUT1 and DUT2 tested +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\ +| ... | routing and 2x10k static IPv6 /64 route entries. DUT1 and DUT2 tested\ | ... | with 2p10GE NIC X710 by Intel. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage -| ... | of packets transmitted. NDR and PDR are discovered for different -| ... | Ethernet L2 frame sizes using MLRsearch library. -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 10k flows per flow-group) with all packets -| ... | containing Ethernet header, IPv6 header withq IP and static payload. -| ... | MAC addresses are matching MAC addresses of the TG node interfaces. -| ... | Incrementing of IP.dst (IPv6 destination address) field is applied to -| ... | both streams. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ +| ... | contains two L3 flow-groups (flow-group per direction, 10k flows per\ +| ... | flow-group) with all packets containing Ethernet header, IPv6 header\ +| ... | with IP and static payload. MAC addresses are matching MAC addresses\ +| ... | of the TG node interfaces. Incrementing of IP.dst (IPv6 destination\ +| ... | address) field is applied to both streams. | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** @@ -80,7 +79,7 @@ | | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg | | ... | ${s_limit} | ${framesize} | | And Apply startup configuration on all VPP DUTs -| | When Initialize IPv6 forwarding with scaling in 3-node circular topology +| | When Initialize IPv6 forwarding with scaling in circular topology | | ... | ${rts_per_flow} | | Then Find NDR and PDR intervals using optimized search | | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} diff --git a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale2m-mrr.robot b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale2m-mrr.robot index 805c59fb78..8da7e55f55 100644 --- a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale2m-mrr.robot +++ b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale2m-mrr.robot @@ -29,21 +29,20 @@ | ... | Documentation | *Raw results IPv6 routing test cases* | ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ | ... | with single links between nodes. | ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6 -| ... | routing and 2x1M static IPv6 /64 route entries. DUT1 and DUT2 tested +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\ +| ... | routing and 2x1M static IPv6 /64 route entries. DUT1 and DUT2 tested\ | ... | with 2p10GE NIC X710 by Intel. | ... | *[Ver] TG verification:* In MaxReceivedRate tests TG sends traffic\ | ... | at line rate and reports total received/sent packets over trial period.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 1M flows per flow-group) with all packets -| ... | containing Ethernet header, IPv6 header withq IP and static payload. -| ... | MAC addresses are matching MAC addresses of the TG node interfaces. -| ... | Incrementing of IP.dst (IPv6 destination address) field is applied to -| ... | both streams. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ +| ... | contains two L3 flow-groups (flow-group per direction, 1M flows per\ +| ... | flow-group) with all packets containing Ethernet header, IPv6 header\ +| ... | with IP and static payload. MAC addresses are matching MAC addresses\ +| ... | of the TG node interfaces. Incrementing of IP.dst (IPv6 destination\ +| ... | address) field is applied to both streams. | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** @@ -74,7 +73,7 @@ | | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg | | ... | ${s_limit} | ${framesize} | | And Apply startup configuration on all VPP DUTs -| | When Initialize IPv6 forwarding with scaling in 3-node circular topology +| | When Initialize IPv6 forwarding with scaling in circular topology | | ... | ${rts_per_flow} | | Then Traffic should pass with maximum rate | | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} diff --git a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale2m-ndrpdr.robot b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale2m-ndrpdr.robot index d73c7538c3..16576be727 100644 --- a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale2m-ndrpdr.robot +++ b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale2m-ndrpdr.robot @@ -30,24 +30,23 @@ | ... | Documentation | *RFC2544: Pkt throughput IPv6 routing test cases* | ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ | ... | with single links between nodes. | ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6 -| ... | routing and 2x1M static IPv6 /64 route entries. DUT1 and DUT2 tested +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\ +| ... | routing and 2x1M static IPv6 /64 route entries. DUT1 and DUT2 tested\ | ... | with 2p10GE NIC X710 by Intel. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage -| ... | of packets transmitted. NDR and PDR are discovered for different -| ... | Ethernet L2 frame sizes using MLRsearch library. -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 1M flows per flow-group) with all packets -| ... | containing Ethernet header, IPv6 header withq IP and static payload. -| ... | MAC addresses are matching MAC addresses of the TG node interfaces. -| ... | Incrementing of IP.dst (IPv6 destination address) field is applied to -| ... | both streams. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ +| ... | contains two L3 flow-groups (flow-group per direction, 1M flows per\ +| ... | flow-group) with all packets containing Ethernet header, IPv6 header\ +| ... | with IP and static payload. MAC addresses are matching MAC addresses\ +| ... | of the TG node interfaces. Incrementing of IP.dst (IPv6 destination\ +| ... | address) field is applied to both streams. | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** @@ -80,7 +79,7 @@ | | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg | | ... | ${s_limit} | ${framesize} | | And Apply startup configuration on all VPP DUTs -| | When Initialize IPv6 forwarding with scaling in 3-node circular topology +| | When Initialize IPv6 forwarding with scaling in circular topology | | ... | ${rts_per_flow} | | Then Find NDR and PDR intervals using optimized search | | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} diff --git a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale200k-mrr.robot b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale200k-mrr.robot new file mode 100644 index 0000000000..c5ada8e128 --- /dev/null +++ b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale200k-mrr.robot @@ -0,0 +1,128 @@ +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR +| ... | NIC_Intel-X710 | ETH | IP6FWD | SCALE | FIB_200k +| ... +| Suite Setup | Set up 2-node performance topology with DUT's NIC model +| ... | L3 | Intel-X710 +| Suite Teardown | Tear down 2-node performance topology +| ... +| Test Setup | Set up performance test +| ... +| Test Teardown | Tear down performance mrr test +| ... +| Test Template | Local Template +| ... +| Documentation | *Raw results IPv6 routing test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with\ +| ... | single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv6 routing and\ +| ... | 2x100k static IPv6 /64 route entries. DUT1 is tested with 2p10GE NIC\ +| ... | X710 by Intel. +| ... | *[Ver] TG verification:* In MaxReceivedRate tests TG sends traffic\ +| ... | at line rate and reports total received/sent packets over trial period.\ +| ... | Test packets are generated by TG on links to DUT1. TG traffic profile\ +| ... | contains two L3 flow-groups (flow-group per direction, 100k flows per\ +| ... | flow-group) with all packets containing Ethernet header, IPv6 header\ +| ... | with IP and static payload. MAC addresses are matching MAC addresses\ +| ... | of the TG node interfaces. Incrementing of IP.dst (IPv6 destination\ +| ... | address) field is applied to both streams. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +# X710-DA2 bandwidth limit +| ${s_limit}= | ${10000000000} +| ${rts_per_flow}= | ${100000} +# Traffic profile: +| ${traffic_profile}= | trex-sl-2n-ethip6-ip6dst${rts_per_flow} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 routing config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ +| | ... | trial throughput test. +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg +| | ... | ${s_limit} | ${framesize} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize IPv6 forwarding with scaling in circular topology +| | ... | ${rts_per_flow} +| | Then Traffic should pass with maximum rate +| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} + +*** Test Cases *** +| tc01-78B-1c-ethip6-ip6scale200k-mrr +| | [Tags] | 78B | 1C +| | framesize=${78} | phy_cores=${1} + +| tc02-78B-2c-ethip6-ip6scale200k-mrr +| | [Tags] | 78B | 2C +| | framesize=${78} | phy_cores=${2} + +| tc03-78B-4c-ethip6-ip6scale200k-mrr +| | [Tags] | 78B | 4C +| | framesize=${78} | phy_cores=${4} + +| tc04-1518B-1c-ethip6-ip6scale200k-mrr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} + +| tc05-1518B-2c-ethip6-ip6scale200k-mrr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} + +| tc06-1518B-4c-ethip6-ip6scale200k-mrr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} + +| tc07-9000B-1c-ethip6-ip6scale200k-mrr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} + +| tc08-9000B-2c-ethip6-ip6scale200k-mrr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} + +| tc09-9000B-4c-ethip6-ip6scale200k-mrr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-ethip6-ip6scale200k-mrr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-ethip6-ip6scale200k-mrr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-ethip6-ip6scale200k-mrr +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale200k-ndrpdr.robot b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale200k-ndrpdr.robot new file mode 100644 index 0000000000..14ead88178 --- /dev/null +++ b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale200k-ndrpdr.robot @@ -0,0 +1,134 @@ +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X710 | ETH | IP6FWD | SCALE | FIB_200k +| ... +| Suite Setup | Set up 2-node performance topology with DUT's NIC model +| ... | L3 | Intel-X710 +| Suite Teardown | Tear down 2-node performance topology +| ... +| Test Setup | Set up performance test +| ... +| Test Teardown | Tear down performance discovery test | ${min_rate}pps +| ... | ${framesize} | ${traffic_profile} +| ... +| Test Template | Local Template +| ... +| Documentation | *RFC2544: Pkt throughput IPv6 routing test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with\ +| ... | single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv6 routing and\ +| ... | 2x100k static IPv6 /64 route entries. DUT1 is tested with 2p10GE NIC\ +| ... | X710 by Intel. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on links to DUT1. TG traffic profile\ +| ... | contains two L3 flow-groups (flow-group per direction, 100k flows per\ +| ... | flow-group) with all packets containing Ethernet header, IPv6 header\ +| ... | with IP and static payload. MAC addresses are matching MAC addresses\ +| ... | of the TG node interfaces. Incrementing of IP.dst (IPv6 destination\ +| ... | address) field is applied to both streams. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +# X710-DA2 bandwidth limit +| ${s_limit}= | ${10000000000} +| ${rts_per_flow}= | ${100000} +# Traffic profile: +| ${traffic_profile}= | trex-sl-3n-ethip6-ip6dst${rts_per_flow} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 routing config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | ${framesize} +| | Set Test Variable | ${min_rate} | ${10000} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg +| | ... | ${s_limit} | ${framesize} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize IPv6 forwarding with scaling in circular topology +| | ... | ${rts_per_flow} +| | Then Find NDR and PDR intervals using optimized search +| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} + +*** Test Cases *** +| tc01-78B-1c-ethip6-ip6scale200k-ndrpdr +| | [Tags] | 78B | 1C +| | framesize=${78} | phy_cores=${1} + +| tc02-78B-2c-ethip6-ip6scale200k-ndrpdr +| | [Tags] | 78B | 2C +| | framesize=${78} | phy_cores=${2} + +| tc03-78B-4c-ethip6-ip6scale200k-ndrpdr +| | [Tags] | 78B | 4C +| | framesize=${78} | phy_cores=${4} + +| tc04-1518B-1c-ethip6-ip6scale200k-ndrpdr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} + +| tc05-1518B-2c-ethip6-ip6scale200k-ndrpdr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} + +| tc06-1518B-4c-ethip6-ip6scale200k-ndrpdr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} + +| tc07-9000B-1c-ethip6-ip6scale200k-ndrpdr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} + +| tc08-9000B-2c-ethip6-ip6scale200k-ndrpdr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} + +| tc09-9000B-4c-ethip6-ip6scale200k-ndrpdr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-ethip6-ip6scale200k-ndrpdr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-ethip6-ip6scale200k-ndrpdr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-ethip6-ip6scale200k-ndrpdr +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale20k-mrr.robot b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale20k-mrr.robot new file mode 100644 index 0000000000..fd577f0db1 --- /dev/null +++ b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale20k-mrr.robot @@ -0,0 +1,128 @@ +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR +| ... | NIC_Intel-X710 | ETH | IP6FWD | SCALE | FIB_20k +| ... +| Suite Setup | Set up 2-node performance topology with DUT's NIC model +| ... | L3 | Intel-X710 +| Suite Teardown | Tear down 2-node performance topology +| ... +| Test Setup | Set up performance test +| ... +| Test Teardown | Tear down performance mrr test +| ... +| Test Template | Local Template +| ... +| Documentation | *Raw results IPv6 routing test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with\ +| ... | single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv6 routing and\ +| ... | 2x10k static IPv6 /64 route entries. DUT1 is tested with 2p10GE NIC\ +| ... | X710 by Intel. +| ... | *[Ver] TG verification:* In MaxReceivedRate tests TG sends traffic\ +| ... | at line rate and reports total received/sent packets over trial period.\ +| ... | Test packets are generated by TG on links to DUT1. TG traffic profile\ +| ... | contains two L3 flow-groups (flow-group per direction, 10k flows per\ +| ... | flow-group) with all packets containing Ethernet header, IPv6 header\ +| ... | with IP and static payload. MAC addresses are matching MAC addresses\ +| ... | of the TG node interfaces. Incrementing of IP.dst (IPv6 destination\ +| ... | address) field is applied to both streams. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +# X710-DA2 bandwidth limit +| ${s_limit}= | ${10000000000} +| ${rts_per_flow}= | ${10000} +# Traffic profile: +| ${traffic_profile}= | trex-sl-2n-ethip6-ip6dst${rts_per_flow} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 routing config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ +| | ... | trial throughput test. +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg +| | ... | ${s_limit} | ${framesize} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize IPv6 forwarding with scaling in circular topology +| | ... | ${rts_per_flow} +| | Then Traffic should pass with maximum rate +| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} + +*** Test Cases *** +| tc01-78B-1c-ethip6-ip6scale20k-mrr +| | [Tags] | 78B | 1C +| | framesize=${78} | phy_cores=${1} + +| tc02-78B-2c-ethip6-ip6scale20k-mrr +| | [Tags] | 78B | 2C +| | framesize=${78} | phy_cores=${2} + +| tc03-78B-4c-ethip6-ip6scale20k-mrr +| | [Tags] | 78B | 4C +| | framesize=${78} | phy_cores=${4} + +| tc04-1518B-1c-ethip6-ip6scale20k-mrr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} + +| tc05-1518B-2c-ethip6-ip6scale20k-mrr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} + +| tc06-1518B-4c-ethip6-ip6scale20k-mrr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} + +| tc07-9000B-1c-ethip6-ip6scale20k-mrr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} + +| tc08-9000B-2c-ethip6-ip6scale20k-mrr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} + +| tc09-9000B-4c-ethip6-ip6scale20k-mrr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-ethip6-ip6scale20k-mrr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-ethip6-ip6scale20k-mrr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-ethip6-ip6scale20k-mrr +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale20k-ndrpdr.robot b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale20k-ndrpdr.robot new file mode 100644 index 0000000000..07e8ae0a95 --- /dev/null +++ b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale20k-ndrpdr.robot @@ -0,0 +1,134 @@ +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X710 | ETH | IP6FWD | SCALE | FIB_20k +| ... +| Suite Setup | Set up 2-node performance topology with DUT's NIC model +| ... | L3 | Intel-X710 +| Suite Teardown | Tear down 2-node performance topology +| ... +| Test Setup | Set up performance test +| ... +| Test Teardown | Tear down performance discovery test | ${min_rate}pps +| ... | ${framesize} | ${traffic_profile} +| ... +| Test Template | Local Template +| ... +| Documentation | *RFC2544: Pkt throughput IPv6 routing test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with\ +| ... | single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv6 routing and\ +| ... | 2x10k static IPv6 /64 route entries. DUT1 is tested with 2p10GE NIC\ +| ... | X710 by Intel. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on links to DUT1. TG traffic profile\ +| ... | contains two L3 flow-groups (flow-group per direction, 10k flows per\ +| ... | flow-group) with all packets containing Ethernet header, IPv6 header\ +| ... | with IP and static payload. MAC addresses are matching MAC addresses\ +| ... | of the TG node interfaces. Incrementing of IP.dst (IPv6 destination\ +| ... | address) field is applied to both streams. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +# X710-DA2 bandwidth limit +| ${s_limit}= | ${10000000000} +| ${rts_per_flow}= | ${10000} +# Traffic profile: +| ${traffic_profile}= | trex-sl-3n-ethip6-ip6dst${rts_per_flow} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 routing config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | ${framesize} +| | Set Test Variable | ${min_rate} | ${10000} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg +| | ... | ${s_limit} | ${framesize} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize IPv6 forwarding with scaling in circular topology +| | ... | ${rts_per_flow} +| | Then Find NDR and PDR intervals using optimized search +| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} + +*** Test Cases *** +| tc01-78B-1c-ethip6-ip6scale20k-ndrpdr +| | [Tags] | 78B | 1C +| | framesize=${78} | phy_cores=${1} + +| tc02-78B-2c-ethip6-ip6scale20k-ndrpdr +| | [Tags] | 78B | 2C +| | framesize=${78} | phy_cores=${2} + +| tc03-78B-4c-ethip6-ip6scale20k-ndrpdr +| | [Tags] | 78B | 4C +| | framesize=${78} | phy_cores=${4} + +| tc04-1518B-1c-ethip6-ip6scale20k-ndrpdr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} + +| tc05-1518B-2c-ethip6-ip6scale20k-ndrpdr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} + +| tc06-1518B-4c-ethip6-ip6scale20k-ndrpdr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} + +| tc07-9000B-1c-ethip6-ip6scale20k-ndrpdr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} + +| tc08-9000B-2c-ethip6-ip6scale20k-ndrpdr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} + +| tc09-9000B-4c-ethip6-ip6scale20k-ndrpdr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-ethip6-ip6scale20k-ndrpdr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-ethip6-ip6scale20k-ndrpdr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-ethip6-ip6scale20k-ndrpdr +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale2m-mrr.robot b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale2m-mrr.robot new file mode 100644 index 0000000000..ee2cff4711 --- /dev/null +++ b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale2m-mrr.robot @@ -0,0 +1,128 @@ +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR +| ... | NIC_Intel-X710 | ETH | IP6FWD | SCALE | FIB_2M +| ... +| Suite Setup | Set up 2-node performance topology with DUT's NIC model +| ... | L3 | Intel-X710 +| Suite Teardown | Tear down 2-node performance topology +| ... +| Test Setup | Set up performance test +| ... +| Test Teardown | Tear down performance mrr test +| ... +| Test Template | Local Template +| ... +| Documentation | *Raw results IPv6 routing test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with\ +| ... | single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv6 routing and\ +| ... | 2x1M static IPv6 /64 route entries. DUT1 is tested with 2p10GE NIC\ +| ... | X710 by Intel. +| ... | *[Ver] TG verification:* In MaxReceivedRate tests TG sends traffic\ +| ... | at line rate and reports total received/sent packets over trial period.\ +| ... | Test packets are generated by TG on links to DUT1. TG traffic profile\ +| ... | contains two L3 flow-groups (flow-group per direction, 1M flows per\ +| ... | flow-group) with all packets containing Ethernet header, IPv6 header\ +| ... | with IP and static payload. MAC addresses are matching MAC addresses\ +| ... | of the TG node interfaces. Incrementing of IP.dst (IPv6 destination\ +| ... | address) field is applied to both streams. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +# X710-DA2 bandwidth limit +| ${s_limit}= | ${10000000000} +| ${rts_per_flow}= | ${1000000} +# Traffic profile: +| ${traffic_profile}= | trex-sl-2n-ethip6-ip6dst${rts_per_flow} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 routing config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ +| | ... | trial throughput test. +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg +| | ... | ${s_limit} | ${framesize} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize IPv6 forwarding with scaling in circular topology +| | ... | ${rts_per_flow} +| | Then Traffic should pass with maximum rate +| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} + +*** Test Cases *** +| tc01-78B-1c-ethip6-ip6scale2m-mrr +| | [Tags] | 78B | 1C +| | framesize=${78} | phy_cores=${1} + +| tc02-78B-2c-ethip6-ip6scale2m-mrr +| | [Tags] | 78B | 2C +| | framesize=${78} | phy_cores=${2} + +| tc03-78B-4c-ethip6-ip6scale2m-mrr +| | [Tags] | 78B | 4C +| | framesize=${78} | phy_cores=${4} + +| tc04-1518B-1c-ethip6-ip6scale2m-mrr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} + +| tc05-1518B-2c-ethip6-ip6scale2m-mrr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} + +| tc06-1518B-4c-ethip6-ip6scale2m-mrr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} + +| tc07-9000B-1c-ethip6-ip6scale2m-mrr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} + +| tc08-9000B-2c-ethip6-ip6scale2m-mrr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} + +| tc09-9000B-4c-ethip6-ip6scale2m-mrr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-ethip6-ip6scale2m-mrr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-ethip6-ip6scale2m-mrr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-ethip6-ip6scale2m-mrr +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale2m-ndrpdr.robot b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale2m-ndrpdr.robot new file mode 100644 index 0000000000..92d3184fe4 --- /dev/null +++ b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale2m-ndrpdr.robot @@ -0,0 +1,134 @@ +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X710 | ETH | IP6FWD | SCALE | FIB_2M +| ... +| Suite Setup | Set up 2-node performance topology with DUT's NIC model +| ... | L3 | Intel-X710 +| Suite Teardown | Tear down 2-node performance topology +| ... +| Test Setup | Set up performance test +| ... +| Test Teardown | Tear down performance discovery test | ${min_rate}pps +| ... | ${framesize} | ${traffic_profile} +| ... +| Test Template | Local Template +| ... +| Documentation | *RFC2544: Pkt throughput IPv6 routing test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with\ +| ... | single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv6 routing and\ +| ... | 2x1M static IPv6 /64 route entries. DUT1 is tested with 2p10GE NIC\ +| ... | X710 by Intel. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on links to DUT1. TG traffic profile\ +| ... | contains two L3 flow-groups (flow-group per direction, 1M flows per\ +| ... | flow-group) with all packets containing Ethernet header, IPv6 header\ +| ... | with IP and static payload. MAC addresses are matching MAC addresses\ +| ... | of the TG node interfaces. Incrementing of IP.dst (IPv6 destination\ +| ... | address) field is applied to both streams. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +# X710-DA2 bandwidth limit +| ${s_limit}= | ${10000000000} +| ${rts_per_flow}= | ${1000000} +# Traffic profile: +| ${traffic_profile}= | trex-sl-3n-ethip6-ip6dst${rts_per_flow} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 routing config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | ${framesize} +| | Set Test Variable | ${min_rate} | ${10000} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg +| | ... | ${s_limit} | ${framesize} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize IPv6 forwarding with scaling in circular topology +| | ... | ${rts_per_flow} +| | Then Find NDR and PDR intervals using optimized search +| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} + +*** Test Cases *** +| tc01-78B-1c-ethip6-ip6scale2m-ndrpdr +| | [Tags] | 78B | 1C +| | framesize=${78} | phy_cores=${1} + +| tc02-78B-2c-ethip6-ip6scale2m-ndrpdr +| | [Tags] | 78B | 2C +| | framesize=${78} | phy_cores=${2} + +| tc03-78B-4c-ethip6-ip6scale2m-ndrpdr +| | [Tags] | 78B | 4C +| | framesize=${78} | phy_cores=${4} + +| tc04-1518B-1c-ethip6-ip6scale2m-ndrpdr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} + +| tc05-1518B-2c-ethip6-ip6scale2m-ndrpdr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} + +| tc06-1518B-4c-ethip6-ip6scale2m-ndrpdr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} + +| tc07-9000B-1c-ethip6-ip6scale2m-ndrpdr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} + +| tc08-9000B-2c-ethip6-ip6scale2m-ndrpdr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} + +| tc09-9000B-4c-ethip6-ip6scale2m-ndrpdr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-ethip6-ip6scale2m-ndrpdr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-ethip6-ip6scale2m-ndrpdr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-ethip6-ip6scale2m-ndrpdr +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/ip6/2n1l-25ge2p1xxv710-ethip6-ip6scale200k-mrr.robot b/tests/vpp/perf/ip6/2n1l-25ge2p1xxv710-ethip6-ip6scale200k-mrr.robot new file mode 100644 index 0000000000..ccea4a9d72 --- /dev/null +++ b/tests/vpp/perf/ip6/2n1l-25ge2p1xxv710-ethip6-ip6scale200k-mrr.robot @@ -0,0 +1,130 @@ +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR +| ... | NIC_Intel-XXV710 | ETH | IP6FWD | SCALE | FIB_200k +| ... +| Suite Setup | Set up 2-node performance topology with DUT's NIC model +| ... | L3 | Intel-XXV710 +| Suite Teardown | Tear down 2-node performance topology +| ... +| Test Setup | Set up performance test +| ... +| Test Teardown | Tear down performance mrr test +| ... +| Test Template | Local Template +| ... +| Documentation | *Raw results IPv6 routing test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with\ +| ... | single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv6 routing and\ +| ... | 2x100k static IPv6 /64 route entries. DUT1 is tested with 2p25GE NIC\ +| ... | XXV710 by Intel. +| ... | *[Ver] TG verification:* In MaxReceivedRate tests TG sends traffic\ +| ... | at line rate and reports total received/sent packets over trial period.\ +| ... | Test packets are generated by TG on links to DUT1. TG traffic profile\ +| ... | contains two L3 flow-groups (flow-group per direction, 100k flows per\ +| ... | flow-group) with all packets containing Ethernet header, IPv6 header\ +| ... | with IP and static payload. MAC addresses are matching MAC addresses\ +| ... | of the TG node interfaces. Incrementing of IP.dst (IPv6 destination\ +| ... | address) field is applied to both streams. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +# XXV710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps +| ${s_24.5G}= | ${24500000000} +# XXV710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps +| ${s_18.75Mpps}= | ${18750000} +| ${rts_per_flow}= | ${100000} +# Traffic profile: +| ${traffic_profile}= | trex-sl-2n-ethip6-ip6dst${rts_per_flow} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 routing config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ +| | ... | trial throughput test. +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg +| | ... | ${s_24.5G} | ${framesize} | pps_limit=${s_18.75Mpps} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize IPv6 forwarding with scaling in circular topology +| | ... | ${rts_per_flow} +| | Then Traffic should pass with maximum rate +| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} + +*** Test Cases *** +| tc01-78B-1c-ethip6-ip6scale200k-mrr +| | [Tags] | 78B | 1C +| | framesize=${78} | phy_cores=${1} + +| tc02-78B-2c-ethip6-ip6scale200k-mrr +| | [Tags] | 78B | 2C +| | framesize=${78} | phy_cores=${2} + +| tc03-78B-4c-ethip6-ip6scale200k-mrr +| | [Tags] | 78B | 4C +| | framesize=${78} | phy_cores=${4} + +| tc04-1518B-1c-ethip6-ip6scale200k-mrr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} + +| tc05-1518B-2c-ethip6-ip6scale200k-mrr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} + +| tc06-1518B-4c-ethip6-ip6scale200k-mrr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} + +| tc07-9000B-1c-ethip6-ip6scale200k-mrr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} + +| tc08-9000B-2c-ethip6-ip6scale200k-mrr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} + +| tc09-9000B-4c-ethip6-ip6scale200k-mrr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-ethip6-ip6scale200k-mrr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-ethip6-ip6scale200k-mrr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-ethip6-ip6scale200k-mrr +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/ip6/2n1l-25ge2p1xxv710-ethip6-ip6scale200k-ndrpdr.robot b/tests/vpp/perf/ip6/2n1l-25ge2p1xxv710-ethip6-ip6scale200k-ndrpdr.robot new file mode 100644 index 0000000000..06690789f1 --- /dev/null +++ b/tests/vpp/perf/ip6/2n1l-25ge2p1xxv710-ethip6-ip6scale200k-ndrpdr.robot @@ -0,0 +1,136 @@ +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-XXV710 | ETH | IP6FWD | SCALE | FIB_200k +| ... +| Suite Setup | Set up 2-node performance topology with DUT's NIC model +| ... | L3 | Intel-XXV710 +| Suite Teardown | Tear down 2-node performance topology +| ... +| Test Setup | Set up performance test +| ... +| Test Teardown | Tear down performance discovery test | ${min_rate}pps +| ... | ${framesize} | ${traffic_profile} +| ... +| Test Template | Local Template +| ... +| Documentation | *RFC2544: Pkt throughput IPv6 routing test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with\ +| ... | single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv6 routing and\ +| ... | 2x100k static IPv6 /64 route entries. DUT1 is tested with 2p25GE NIC\ +| ... | XXV710 by Intel. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on links to DUT1. TG traffic profile\ +| ... | contains two L3 flow-groups (flow-group per direction, 100k flows per\ +| ... | flow-group) with all packets containing Ethernet header, IPv6 header\ +| ... | with IP and static payload. MAC addresses are matching MAC addresses\ +| ... | of the TG node interfaces. Incrementing of IP.dst (IPv6 destination\ +| ... | address) field is applied to both streams. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +# XXV710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps +| ${s_24.5G}= | ${24500000000} +# XXV710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps +| ${s_18.75Mpps}= | ${18750000} +| ${rts_per_flow}= | ${100000} +# Traffic profile: +| ${traffic_profile}= | trex-sl-3n-ethip6-ip6dst${rts_per_flow} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 routing config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | ${framesize} +| | Set Test Variable | ${min_rate} | ${10000} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg +| | ... | ${s_24.5G} | ${framesize} | pps_limit=${s_18.75Mpps} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize IPv6 forwarding with scaling in circular topology +| | ... | ${rts_per_flow} +| | Then Find NDR and PDR intervals using optimized search +| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} + +*** Test Cases *** +| tc01-78B-1c-ethip6-ip6scale200k-ndrpdr +| | [Tags] | 78B | 1C +| | framesize=${78} | phy_cores=${1} + +| tc02-78B-2c-ethip6-ip6scale200k-ndrpdr +| | [Tags] | 78B | 2C +| | framesize=${78} | phy_cores=${2} + +| tc03-78B-4c-ethip6-ip6scale200k-ndrpdr +| | [Tags] | 78B | 4C +| | framesize=${78} | phy_cores=${4} + +| tc04-1518B-1c-ethip6-ip6scale200k-ndrpdr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} + +| tc05-1518B-2c-ethip6-ip6scale200k-ndrpdr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} + +| tc06-1518B-4c-ethip6-ip6scale200k-ndrpdr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} + +| tc07-9000B-1c-ethip6-ip6scale200k-ndrpdr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} + +| tc08-9000B-2c-ethip6-ip6scale200k-ndrpdr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} + +| tc09-9000B-4c-ethip6-ip6scale200k-ndrpdr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-ethip6-ip6scale200k-ndrpdr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-ethip6-ip6scale200k-ndrpdr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-ethip6-ip6scale200k-ndrpdr +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/ip6/2n1l-25ge2p1xxv710-ethip6-ip6scale20k-mrr.robot b/tests/vpp/perf/ip6/2n1l-25ge2p1xxv710-ethip6-ip6scale20k-mrr.robot new file mode 100644 index 0000000000..2616708bd3 --- /dev/null +++ b/tests/vpp/perf/ip6/2n1l-25ge2p1xxv710-ethip6-ip6scale20k-mrr.robot @@ -0,0 +1,130 @@ +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR +| ... | NIC_Intel-XXV710 | ETH | IP6FWD | SCALE | FIB_20k +| ... +| Suite Setup | Set up 2-node performance topology with DUT's NIC model +| ... | L3 | Intel-XXV710 +| Suite Teardown | Tear down 2-node performance topology +| ... +| Test Setup | Set up performance test +| ... +| Test Teardown | Tear down performance mrr test +| ... +| Test Template | Local Template +| ... +| Documentation | *Raw results IPv6 routing test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with\ +| ... | single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv6 routing and\ +| ... | 2x10k static IPv6 /64 route entries. DUT1 is tested with 2p25GE NIC\ +| ... | XXV710 by Intel. +| ... | *[Ver] TG verification:* In MaxReceivedRate tests TG sends traffic\ +| ... | at line rate and reports total received/sent packets over trial period.\ +| ... | Test packets are generated by TG on links to DUT1. TG traffic profile\ +| ... | contains two L3 flow-groups (flow-group per direction, 10k flows per\ +| ... | flow-group) with all packets containing Ethernet header, IPv6 header\ +| ... | with IP and static payload. MAC addresses are matching MAC addresses\ +| ... | of the TG node interfaces. Incrementing of IP.dst (IPv6 destination\ +| ... | address) field is applied to both streams. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +# XXV710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps +| ${s_24.5G}= | ${24500000000} +# XXV710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps +| ${s_18.75Mpps}= | ${18750000} +| ${rts_per_flow}= | ${10000} +# Traffic profile: +| ${traffic_profile}= | trex-sl-2n-ethip6-ip6dst${rts_per_flow} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 routing config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ +| | ... | trial throughput test. +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg +| | ... | ${s_24.5G} | ${framesize} | pps_limit=${s_18.75Mpps} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize IPv6 forwarding with scaling in circular topology +| | ... | ${rts_per_flow} +| | Then Traffic should pass with maximum rate +| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} + +*** Test Cases *** +| tc01-78B-1c-ethip6-ip6scale20k-mrr +| | [Tags] | 78B | 1C +| | framesize=${78} | phy_cores=${1} + +| tc02-78B-2c-ethip6-ip6scale20k-mrr +| | [Tags] | 78B | 2C +| | framesize=${78} | phy_cores=${2} + +| tc03-78B-4c-ethip6-ip6scale20k-mrr +| | [Tags] | 78B | 4C +| | framesize=${78} | phy_cores=${4} + +| tc04-1518B-1c-ethip6-ip6scale20k-mrr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} + +| tc05-1518B-2c-ethip6-ip6scale20k-mrr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} + +| tc06-1518B-4c-ethip6-ip6scale20k-mrr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} + +| tc07-9000B-1c-ethip6-ip6scale20k-mrr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} + +| tc08-9000B-2c-ethip6-ip6scale20k-mrr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} + +| tc09-9000B-4c-ethip6-ip6scale20k-mrr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-ethip6-ip6scale20k-mrr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-ethip6-ip6scale20k-mrr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-ethip6-ip6scale20k-mrr +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/ip6/2n1l-25ge2p1xxv710-ethip6-ip6scale20k-ndrpdr.robot b/tests/vpp/perf/ip6/2n1l-25ge2p1xxv710-ethip6-ip6scale20k-ndrpdr.robot new file mode 100644 index 0000000000..f636cea78c --- /dev/null +++ b/tests/vpp/perf/ip6/2n1l-25ge2p1xxv710-ethip6-ip6scale20k-ndrpdr.robot @@ -0,0 +1,136 @@ +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-XXV710 | ETH | IP6FWD | SCALE | FIB_20k +| ... +| Suite Setup | Set up 2-node performance topology with DUT's NIC model +| ... | L3 | Intel-XXV710 +| Suite Teardown | Tear down 2-node performance topology +| ... +| Test Setup | Set up performance test +| ... +| Test Teardown | Tear down performance discovery test | ${min_rate}pps +| ... | ${framesize} | ${traffic_profile} +| ... +| Test Template | Local Template +| ... +| Documentation | *RFC2544: Pkt throughput IPv6 routing test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with\ +| ... | single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv6 routing and\ +| ... | 2x10k static IPv6 /64 route entries. DUT1 is tested with 2p25GE NIC\ +| ... | XXV710 by Intel. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on links to DUT1. TG traffic profile\ +| ... | contains two L3 flow-groups (flow-group per direction, 10k flows per\ +| ... | flow-group) with all packets containing Ethernet header, IPv6 header\ +| ... | with IP and static payload. MAC addresses are matching MAC addresses\ +| ... | of the TG node interfaces. Incrementing of IP.dst (IPv6 destination\ +| ... | address) field is applied to both streams. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +# XXV710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps +| ${s_24.5G}= | ${24500000000} +# XXV710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps +| ${s_18.75Mpps}= | ${18750000} +| ${rts_per_flow}= | ${10000} +# Traffic profile: +| ${traffic_profile}= | trex-sl-3n-ethip6-ip6dst${rts_per_flow} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 routing config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | ${framesize} +| | Set Test Variable | ${min_rate} | ${10000} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg +| | ... | ${s_24.5G} | ${framesize} | pps_limit=${s_18.75Mpps} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize IPv6 forwarding with scaling in circular topology +| | ... | ${rts_per_flow} +| | Then Find NDR and PDR intervals using optimized search +| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} + +*** Test Cases *** +| tc01-78B-1c-ethip6-ip6scale20k-ndrpdr +| | [Tags] | 78B | 1C +| | framesize=${78} | phy_cores=${1} + +| tc02-78B-2c-ethip6-ip6scale20k-ndrpdr +| | [Tags] | 78B | 2C +| | framesize=${78} | phy_cores=${2} + +| tc03-78B-4c-ethip6-ip6scale20k-ndrpdr +| | [Tags] | 78B | 4C +| | framesize=${78} | phy_cores=${4} + +| tc04-1518B-1c-ethip6-ip6scale20k-ndrpdr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} + +| tc05-1518B-2c-ethip6-ip6scale20k-ndrpdr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} + +| tc06-1518B-4c-ethip6-ip6scale20k-ndrpdr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} + +| tc07-9000B-1c-ethip6-ip6scale20k-ndrpdr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} + +| tc08-9000B-2c-ethip6-ip6scale20k-ndrpdr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} + +| tc09-9000B-4c-ethip6-ip6scale20k-ndrpdr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-ethip6-ip6scale20k-ndrpdr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-ethip6-ip6scale20k-ndrpdr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-ethip6-ip6scale20k-ndrpdr +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/ip6/2n1l-25ge2p1xxv710-ethip6-ip6scale2m-mrr.robot b/tests/vpp/perf/ip6/2n1l-25ge2p1xxv710-ethip6-ip6scale2m-mrr.robot new file mode 100644 index 0000000000..f0e54d288b --- /dev/null +++ b/tests/vpp/perf/ip6/2n1l-25ge2p1xxv710-ethip6-ip6scale2m-mrr.robot @@ -0,0 +1,130 @@ +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR +| ... | NIC_Intel-XXV710 | ETH | IP6FWD | SCALE | FIB_2M +| ... +| Suite Setup | Set up 2-node performance topology with DUT's NIC model +| ... | L3 | Intel-XXV710 +| Suite Teardown | Tear down 2-node performance topology +| ... +| Test Setup | Set up performance test +| ... +| Test Teardown | Tear down performance mrr test +| ... +| Test Template | Local Template +| ... +| Documentation | *Raw results IPv6 routing test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with\ +| ... | single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv6 routing and\ +| ... | 2x1M static IPv6 /64 route entries. DUT1 is tested with 2p25GE NIC\ +| ... | XXV710 by Intel. +| ... | *[Ver] TG verification:* In MaxReceivedRate tests TG sends traffic\ +| ... | at line rate and reports total received/sent packets over trial period.\ +| ... | Test packets are generated by TG on links to DUT1. TG traffic profile\ +| ... | contains two L3 flow-groups (flow-group per direction, 1M flows per\ +| ... | flow-group) with all packets containing Ethernet header, IPv6 header\ +| ... | with IP and static payload. MAC addresses are matching MAC addresses\ +| ... | of the TG node interfaces. Incrementing of IP.dst (IPv6 destination\ +| ... | address) field is applied to both streams. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +# XXV710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps +| ${s_24.5G}= | ${24500000000} +# XXV710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps +| ${s_18.75Mpps}= | ${18750000} +| ${rts_per_flow}= | ${1000000} +# Traffic profile: +| ${traffic_profile}= | trex-sl-2n-ethip6-ip6dst${rts_per_flow} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 routing config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ +| | ... | trial throughput test. +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg +| | ... | ${s_24.5G} | ${framesize} | pps_limit=${s_18.75Mpps} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize IPv6 forwarding with scaling in circular topology +| | ... | ${rts_per_flow} +| | Then Traffic should pass with maximum rate +| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} + +*** Test Cases *** +| tc01-78B-1c-ethip6-ip6scale2m-mrr +| | [Tags] | 78B | 1C +| | framesize=${78} | phy_cores=${1} + +| tc02-78B-2c-ethip6-ip6scale2m-mrr +| | [Tags] | 78B | 2C +| | framesize=${78} | phy_cores=${2} + +| tc03-78B-4c-ethip6-ip6scale2m-mrr +| | [Tags] | 78B | 4C +| | framesize=${78} | phy_cores=${4} + +| tc04-1518B-1c-ethip6-ip6scale2m-mrr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} + +| tc05-1518B-2c-ethip6-ip6scale2m-mrr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} + +| tc06-1518B-4c-ethip6-ip6scale2m-mrr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} + +| tc07-9000B-1c-ethip6-ip6scale2m-mrr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} + +| tc08-9000B-2c-ethip6-ip6scale2m-mrr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} + +| tc09-9000B-4c-ethip6-ip6scale2m-mrr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-ethip6-ip6scale2m-mrr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-ethip6-ip6scale2m-mrr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-ethip6-ip6scale2m-mrr +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/ip6/2n1l-25ge2p1xxv710-ethip6-ip6scale2m-ndrpdr.robot b/tests/vpp/perf/ip6/2n1l-25ge2p1xxv710-ethip6-ip6scale2m-ndrpdr.robot new file mode 100644 index 0000000000..c4ad8851b3 --- /dev/null +++ b/tests/vpp/perf/ip6/2n1l-25ge2p1xxv710-ethip6-ip6scale2m-ndrpdr.robot @@ -0,0 +1,136 @@ +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-XXV710 | ETH | IP6FWD | SCALE | FIB_2M +| ... +| Suite Setup | Set up 2-node performance topology with DUT's NIC model +| ... | L3 | Intel-XXV710 +| Suite Teardown | Tear down 2-node performance topology +| ... +| Test Setup | Set up performance test +| ... +| Test Teardown | Tear down performance discovery test | ${min_rate}pps +| ... | ${framesize} | ${traffic_profile} +| ... +| Test Template | Local Template +| ... +| Documentation | *RFC2544: Pkt throughput IPv6 routing test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with\ +| ... | single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv6 routing and\ +| ... | 2x1M static IPv6 /64 route entries. DUT1 is tested with 2p25GE NIC\ +| ... | XXV710 by Intel. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on links to DUT1. TG traffic profile\ +| ... | contains two L3 flow-groups (flow-group per direction, 1M flows per\ +| ... | flow-group) with all packets containing Ethernet header, IPv6 header\ +| ... | with IP and static payload. MAC addresses are matching MAC addresses\ +| ... | of the TG node interfaces. Incrementing of IP.dst (IPv6 destination\ +| ... | address) field is applied to both streams. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +# XXV710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps +| ${s_24.5G}= | ${24500000000} +# XXV710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps +| ${s_18.75Mpps}= | ${18750000} +| ${rts_per_flow}= | ${1000000} +# Traffic profile: +| ${traffic_profile}= | trex-sl-3n-ethip6-ip6dst${rts_per_flow} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 routing config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | ${framesize} +| | Set Test Variable | ${min_rate} | ${10000} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg +| | ... | ${s_24.5G} | ${framesize} | pps_limit=${s_18.75Mpps} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize IPv6 forwarding with scaling in circular topology +| | ... | ${rts_per_flow} +| | Then Find NDR and PDR intervals using optimized search +| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} + +*** Test Cases *** +| tc01-78B-1c-ethip6-ip6scale2m-ndrpdr +| | [Tags] | 78B | 1C +| | framesize=${78} | phy_cores=${1} + +| tc02-78B-2c-ethip6-ip6scale2m-ndrpdr +| | [Tags] | 78B | 2C +| | framesize=${78} | phy_cores=${2} + +| tc03-78B-4c-ethip6-ip6scale2m-ndrpdr +| | [Tags] | 78B | 4C +| | framesize=${78} | phy_cores=${4} + +| tc04-1518B-1c-ethip6-ip6scale2m-ndrpdr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} + +| tc05-1518B-2c-ethip6-ip6scale2m-ndrpdr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} + +| tc06-1518B-4c-ethip6-ip6scale2m-ndrpdr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} + +| tc07-9000B-1c-ethip6-ip6scale2m-ndrpdr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} + +| tc08-9000B-2c-ethip6-ip6scale2m-ndrpdr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} + +| tc09-9000B-4c-ethip6-ip6scale2m-ndrpdr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-ethip6-ip6scale2m-ndrpdr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-ethip6-ip6scale2m-ndrpdr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-ethip6-ip6scale2m-ndrpdr +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | phy_cores=${4} |