8 files changed, 1200 insertions, 0 deletions
diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot
new file mode 100644
index 0000000000..5d0b32ee4f
--- /dev/null
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot
@@ -0,0 +1,150 @@
+# Copyright (c) 2021 PANTHEON.tech s.r.o.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+| Resource | resources/libraries/robot/crypto/ipsec.robot
+|
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | IP4FWD
+| ... | SCALE | IPSEC | IPSECSW | IPSECSPD | SPD_OUTBOUND | SPD_FLOW_CACHE
+| ... | SPE_1000 | NOCRYPTO
+| ... | NIC_Intel-X710 | DRV_VFIO_PCI | RXQ_SIZE_0 | TXQ_SIZE_0
+| ... | ethip4ipsec1000spe-cache-ip4base-policy-outbound-nocrypto
+|
+| Suite Setup | Setup suite topology interfaces | performance
+| Suite Teardown | Tear down suite | performance
+| Test Setup | Setup test | performance
+| Test Teardown | Tear down test | performance
+|
+| Test Template | Local Template
+|
+| Documentation | *RFC4301: SPD lookup performance*
+|
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing.
+| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing, two
+| ... | static IPv4 /24 route entries, one SPD on each outbound interface in
+| ... | each direction and ${rule amount} SPD entry(ies) in each SPD. Only
+| ... | outbound traffic is matched and only the last rule is the matching
+| ... | rule. SPD flow-cache for IPv4 outbound traffic is enabled.
+| ... | DUT1 tested with ${nic_name}.\
+| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
+| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
+| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
+| ... | of packets transmitted. NDR and PDR are discovered for different\
+| ... | Ethernet L2 frame sizes using MLRsearch library.\
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
+| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only
+| ... | the lowest priority rule matching the traffic. The action of the
+| ... | matching rule is BYPASS. No encryption or authentication is done.
+| ... | *[Ref] Applicable standard specifications:* RFC4301 and RFC2544.
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
+| ${crypto_type}= | ${None}
+| ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
+| ${nic_rxq_size}= | 0
+| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
+| ${osi_layer}= | L3
+| ${overhead}= | ${0}
+| ${remote_addr_range_ip4}= | 20.20.20.0/24
+| ${local_addr_range_ip4}= | 10.10.10.0/24
+| ${rule_amount}= | ${1000}
+# Traffic profile
+| ${traffic_profile}= | trex-stl-2n-ethip4-ip4src253
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with IPsec SPD rules.\
+| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
+| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| |
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
+| | ... | Type: integer, string
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| |
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| |
+| | Set Test Variable | \${frame_size}
+| |
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Enable SPD flow cache IPv4 Outbound
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
+| | And Initialize IPv4 forwarding in circular topology
+| | And VPP IPsec create SPDs match nth entry
+| | ... | ${dut1} | ${DUT1_${int}2}[0] | ${DUT1_${int}1}[0] | ${rule_amount}
+| | ... | ${local_addr_range_ip4} | ${remote_addr_range_ip4}
+| | Then Find NDR and PDR intervals using optimized search
+
+*** Test Cases ***
+| 64B-1c-ethip4ipsec1000spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | 64B | 1C
+| | frame_size=${64} | phy_cores=${1}
+
+| 64B-2c-ethip4ipsec1000spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | 64B | 2C
+| | frame_size=${64} | phy_cores=${2}
+
+| 64B-4c-ethip4ipsec1000spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | 64B | 4C
+| | frame_size=${64} | phy_cores=${4}
+
+| 1518B-1c-ethip4ipsec1000spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| 1518B-2c-ethip4ipsec1000spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| 1518B-4c-ethip4ipsec1000spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| 9000B-1c-ethip4ipsec1000spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | 9000B | 1C
+| | frame_size=${9000} | phy_cores=${1}
+
+| 9000B-2c-ethip4ipsec1000spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | 9000B | 2C
+| | frame_size=${9000} | phy_cores=${2}
+
+| 9000B-4c-ethip4ipsec1000spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | 9000B | 4C
+| | frame_size=${9000} | phy_cores=${4}
+
+| IMIX-1c-ethip4ipsec1000spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | IMIX | 1C
+| | frame_size=IMIX_v4_1 | phy_cores=${1}
+
+| IMIX-2c-ethip4ipsec1000spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | IMIX | 2C
+| | frame_size=IMIX_v4_1 | phy_cores=${2}
+
+| IMIX-4c-ethip4ipsec1000spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | IMIX | 4C
+| | frame_size=IMIX_v4_1 | phy_cores=${4}
diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec100spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec100spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot
new file mode 100644
index 0000000000..aa832efc0a
--- /dev/null
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec100spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot
@@ -0,0 +1,150 @@
+# Copyright (c) 2021 PANTHEON.tech s.r.o.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+| Resource | resources/libraries/robot/crypto/ipsec.robot
+|
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | IP4FWD
+| ... | SCALE | IPSEC | IPSECSW | IPSECSPD | SPD_OUTBOUND | SPD_FLOW_CACHE
+| ... | SPE_100 | NOCRYPTO
+| ... | NIC_Intel-X710 | DRV_VFIO_PCI | RXQ_SIZE_0 | TXQ_SIZE_0
+| ... | ethip4ipsec100spe-cache-ip4base-policy-outbound-nocrypto
+|
+| Suite Setup | Setup suite topology interfaces | performance
+| Suite Teardown | Tear down suite | performance
+| Test Setup | Setup test | performance
+| Test Teardown | Tear down test | performance
+|
+| Test Template | Local Template
+|
+| Documentation | *RFC4301: SPD lookup performance*
+|
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing.
+| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing, two
+| ... | static IPv4 /24 route entries, one SPD on each outbound interface in
+| ... | each direction and ${rule amount} SPD entry(ies) in each SPD. Only
+| ... | outbound traffic is matched and only the last rule is the matching
+| ... | rule. SPD flow-cache for IPv4 outbound traffic is enabled.
+| ... | DUT1 tested with ${nic_name}.\
+| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
+| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
+| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
+| ... | of packets transmitted. NDR and PDR are discovered for different\
+| ... | Ethernet L2 frame sizes using MLRsearch library.\
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
+| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only
+| ... | the lowest priority rule matching the traffic. The action of the
+| ... | matching rule is BYPASS. No encryption or authentication is done.
+| ... | *[Ref] Applicable standard specifications:* RFC4301 and RFC2544.
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
+| ${crypto_type}= | ${None}
+| ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
+| ${nic_rxq_size}= | 0
+| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
+| ${osi_layer}= | L3
+| ${overhead}= | ${0}
+| ${remote_addr_range_ip4}= | 20.20.20.0/24
+| ${local_addr_range_ip4}= | 10.10.10.0/24
+| ${rule_amount}= | ${100}
+# Traffic profile
+| ${traffic_profile}= | trex-stl-2n-ethip4-ip4src253
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with IPsec SPD rules.\
+| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
+| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| |
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
+| | ... | Type: integer, string
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| |
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| |
+| | Set Test Variable | \${frame_size}
+| |
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Enable SPD flow cache IPv4 Outbound
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
+| | And Initialize IPv4 forwarding in circular topology
+| | And VPP IPsec create SPDs match nth entry
+| | ... | ${dut1} | ${DUT1_${int}2}[0] | ${DUT1_${int}1}[0] | ${rule_amount}
+| | ... | ${local_addr_range_ip4} | ${remote_addr_range_ip4}
+| | Then Find NDR and PDR intervals using optimized search
+
+*** Test Cases ***
+| 64B-1c-ethip4ipsec100spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | 64B | 1C
+| | frame_size=${64} | phy_cores=${1}
+
+| 64B-2c-ethip4ipsec100spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | 64B | 2C
+| | frame_size=${64} | phy_cores=${2}
+
+| 64B-4c-ethip4ipsec100spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | 64B | 4C
+| | frame_size=${64} | phy_cores=${4}
+
+| 1518B-1c-ethip4ipsec100spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| 1518B-2c-ethip4ipsec100spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| 1518B-4c-ethip4ipsec100spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| 9000B-1c-ethip4ipsec100spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | 9000B | 1C
+| | frame_size=${9000} | phy_cores=${1}
+
+| 9000B-2c-ethip4ipsec100spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | 9000B | 2C
+| | frame_size=${9000} | phy_cores=${2}
+
+| 9000B-4c-ethip4ipsec100spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | 9000B | 4C
+| | frame_size=${9000} | phy_cores=${4}
+
+| IMIX-1c-ethip4ipsec100spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | IMIX | 1C
+| | frame_size=IMIX_v4_1 | phy_cores=${1}
+
+| IMIX-2c-ethip4ipsec100spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | IMIX | 2C
+| | frame_size=IMIX_v4_1 | phy_cores=${2}
+
+| IMIX-4c-ethip4ipsec100spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | IMIX | 4C
+| | frame_size=IMIX_v4_1 | phy_cores=${4}
diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot
new file mode 100644
index 0000000000..2fd02fe978
--- /dev/null
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot
@@ -0,0 +1,150 @@
+# Copyright (c) 2021 PANTHEON.tech s.r.o.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+| Resource | resources/libraries/robot/crypto/ipsec.robot
+|
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | IP4FWD
+| ... | SCALE | IPSEC | IPSECSW | IPSECSPD | SPD_OUTBOUND | SPD_FLOW_CACHE
+| ... | SPE_10 | NOCRYPTO
+| ... | NIC_Intel-X710 | DRV_VFIO_PCI | RXQ_SIZE_0 | TXQ_SIZE_0
+| ... | ethip4ipsec10spe-cache-ip4base-policy-outbound-nocrypto
+|
+| Suite Setup | Setup suite topology interfaces | performance
+| Suite Teardown | Tear down suite | performance
+| Test Setup | Setup test | performance
+| Test Teardown | Tear down test | performance
+|
+| Test Template | Local Template
+|
+| Documentation | *RFC4301: SPD lookup performance*
+|
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing.
+| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing, two
+| ... | static IPv4 /24 route entries, one SPD on each outbound interface in
+| ... | each direction and ${rule amount} SPD entry(ies) in each SPD. Only
+| ... | outbound traffic is matched and only the last rule is the matching
+| ... | rule. SPD flow-cache for IPv4 outbound traffic is enabled.
+| ... | DUT1 tested with ${nic_name}.\
+| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
+| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
+| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
+| ... | of packets transmitted. NDR and PDR are discovered for different\
+| ... | Ethernet L2 frame sizes using MLRsearch library.\
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
+| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only
+| ... | the lowest priority rule matching the traffic. The action of the
+| ... | matching rule is BYPASS. No encryption or authentication is done.
+| ... | *[Ref] Applicable standard specifications:* RFC4301 and RFC2544.
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
+| ${crypto_type}= | ${None}
+| ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
+| ${nic_rxq_size}= | 0
+| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
+| ${osi_layer}= | L3
+| ${overhead}= | ${0}
+| ${remote_addr_range_ip4}= | 20.20.20.0/24
+| ${local_addr_range_ip4}= | 10.10.10.0/24
+| ${rule_amount}= | ${10}
+# Traffic profile
+| ${traffic_profile}= | trex-stl-2n-ethip4-ip4src253
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with IPsec SPD rules.\
+| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
+| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| |
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
+| | ... | Type: integer, string
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| |
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| |
+| | Set Test Variable | \${frame_size}
+| |
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Enable SPD flow cache IPv4 Outbound
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
+| | And Initialize IPv4 forwarding in circular topology
+| | And VPP IPsec create SPDs match nth entry
+| | ... | ${dut1} | ${DUT1_${int}2}[0] | ${DUT1_${int}1}[0] | ${rule_amount}
+| | ... | ${local_addr_range_ip4} | ${remote_addr_range_ip4}
+| | Then Find NDR and PDR intervals using optimized search
+
+*** Test Cases ***
+| 64B-1c-ethip4ipsec10spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | 64B | 1C
+| | frame_size=${64} | phy_cores=${1}
+
+| 64B-2c-ethip4ipsec10spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | 64B | 2C
+| | frame_size=${64} | phy_cores=${2}
+
+| 64B-4c-ethip4ipsec10spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | 64B | 4C
+| | frame_size=${64} | phy_cores=${4}
+
+| 1518B-1c-ethip4ipsec10spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| 1518B-2c-ethip4ipsec10spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| 1518B-4c-ethip4ipsec10spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| 9000B-1c-ethip4ipsec10spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | 9000B | 1C
+| | frame_size=${9000} | phy_cores=${1}
+
+| 9000B-2c-ethip4ipsec10spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | 9000B | 2C
+| | frame_size=${9000} | phy_cores=${2}
+
+| 9000B-4c-ethip4ipsec10spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | 9000B | 4C
+| | frame_size=${9000} | phy_cores=${4}
+
+| IMIX-1c-ethip4ipsec10spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | IMIX | 1C
+| | frame_size=IMIX_v4_1 | phy_cores=${1}
+
+| IMIX-2c-ethip4ipsec10spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | IMIX | 2C
+| | frame_size=IMIX_v4_1 | phy_cores=${2}
+
+| IMIX-4c-ethip4ipsec10spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | IMIX | 4C
+| | frame_size=IMIX_v4_1 | phy_cores=${4}
diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot
new file mode 100644
index 0000000000..458c73913d
--- /dev/null
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot
@@ -0,0 +1,150 @@
+# Copyright (c) 2021 PANTHEON.tech s.r.o.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+| Resource | resources/libraries/robot/crypto/ipsec.robot
+|
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | IP4FWD
+| ... | BASE | IPSEC | IPSECSW | IPSECSPD | SPD_OUTBOUND | SPD_FLOW_CACHE
+| ... | SPE_1 | NOCRYPTO
+| ... | NIC_Intel-X710 | DRV_VFIO_PCI | RXQ_SIZE_0 | TXQ_SIZE_0
+| ... | ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto
+|
+| Suite Setup | Setup suite topology interfaces | performance
+| Suite Teardown | Tear down suite | performance
+| Test Setup | Setup test | performance
+| Test Teardown | Tear down test | performance
+|
+| Test Template | Local Template
+|
+| Documentation | *RFC4301: SPD lookup performance*
+|
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing.
+| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing, two
+| ... | static IPv4 /24 route entries, one SPD on each outbound interface in
+| ... | each direction and ${rule amount} SPD entry(ies) in each SPD. Only
+| ... | outbound traffic is matched and only the last rule is the matching
+| ... | rule. SPD flow-cache for IPv4 outbound traffic is enabled.
+| ... | DUT1 tested with ${nic_name}.\
+| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
+| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
+| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
+| ... | of packets transmitted. NDR and PDR are discovered for different\
+| ... | Ethernet L2 frame sizes using MLRsearch library.\
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
+| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only
+| ... | the lowest priority rule matching the traffic. The action of the
+| ... | matching rule is BYPASS. No encryption or authentication is done.
+| ... | *[Ref] Applicable standard specifications:* RFC4301 and RFC2544.
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
+| ${crypto_type}= | ${None}
+| ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
+| ${nic_rxq_size}= | 0
+| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
+| ${osi_layer}= | L3
+| ${overhead}= | ${0}
+| ${remote_addr_range_ip4}= | 20.20.20.0/24
+| ${local_addr_range_ip4}= | 10.10.10.0/24
+| ${rule_amount}= | ${1}
+# Traffic profile
+| ${traffic_profile}= | trex-stl-2n-ethip4-ip4src253
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with IPsec SPD rules.\
+| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
+| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| |
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
+| | ... | Type: integer, string
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| |
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| |
+| | Set Test Variable | \${frame_size}
+| |
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Enable SPD flow cache IPv4 Outbound
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
+| | And Initialize IPv4 forwarding in circular topology
+| | And VPP IPsec create SPDs match nth entry
+| | ... | ${dut1} | ${DUT1_${int}2}[0] | ${DUT1_${int}1}[0] | ${rule_amount}
+| | ... | ${local_addr_range_ip4} | ${remote_addr_range_ip4}
+| | Then Find NDR and PDR intervals using optimized search
+
+*** Test Cases ***
+| 64B-1c-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | 64B | 1C
+| | frame_size=${64} | phy_cores=${1}
+
+| 64B-2c-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | 64B | 2C
+| | frame_size=${64} | phy_cores=${2}
+
+| 64B-4c-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | 64B | 4C
+| | frame_size=${64} | phy_cores=${4}
+
+| 1518B-1c-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| 1518B-2c-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| 1518B-4c-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| 9000B-1c-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | 9000B | 1C
+| | frame_size=${9000} | phy_cores=${1}
+
+| 9000B-2c-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | 9000B | 2C
+| | frame_size=${9000} | phy_cores=${2}
+
+| 9000B-4c-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | 9000B | 4C
+| | frame_size=${9000} | phy_cores=${4}
+
+| IMIX-1c-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | IMIX | 1C
+| | frame_size=IMIX_v4_1 | phy_cores=${1}
+
+| IMIX-2c-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | IMIX | 2C
+| | frame_size=IMIX_v4_1 | phy_cores=${2}
+
+| IMIX-4c-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | IMIX | 4C
+| | frame_size=IMIX_v4_1 | phy_cores=${4}
diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot
new file mode 100644
index 0000000000..376c6a7d4e
--- /dev/null
+++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot
@@ -0,0 +1,150 @@
+# Copyright (c) 2021 PANTHEON.tech s.r.o.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+| Resource | resources/libraries/robot/crypto/ipsec.robot
+|
+| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | IP4FWD
+| ... | SCALE | IPSEC | IPSECSW | IPSECSPD | SPD_OUTBOUND | SPD_FLOW_CACHE
+| ... | SPE_1000 | NOCRYPTO
+| ... | NIC_Intel-X710 | DRV_VFIO_PCI | RXQ_SIZE_0 | TXQ_SIZE_0
+| ... | ethip4ipsec1000spe-cache-ip4base-policy-outbound-nocrypto
+|
+| Suite Setup | Setup suite topology interfaces | performance
+| Suite Teardown | Tear down suite | performance
+| Test Setup | Setup test | performance
+| Test Teardown | Tear down test | performance
+|
+| Test Template | Local Template
+|
+| Documentation | *RFC4301: SPD lookup performance*
+|
+| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing.
+| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing, two
+| ... | static IPv4 /24 route entries, one SPD on each outbound interface in
+| ... | each direction and ${rule amount} SPD entry(ies) in each SPD. Only
+| ... | outbound traffic is matched and only the last rule is the matching
+| ... | rule. SPD flow-cache for IPv4 outbound traffic is enabled.
+| ... | DUT1 tested with ${nic_name}.\
+| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
+| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
+| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
+| ... | of packets transmitted. NDR and PDR are discovered for different\
+| ... | Ethernet L2 frame sizes using MLRsearch library.\
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
+| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only
+| ... | the lowest priority rule matching the traffic. The action of the
+| ... | matching rule is BYPASS. No encryption or authentication is done.
+| ... | *[Ref] Applicable standard specifications:* RFC4301 and RFC2544.
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
+| ${crypto_type}= | ${None}
+| ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
+| ${nic_rxq_size}= | 0
+| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
+| ${osi_layer}= | L3
+| ${overhead}= | ${0}
+| ${remote_addr_range_ip4}= | 20.20.20.0/24
+| ${local_addr_range_ip4}= | 10.10.10.0/24
+| ${rule_amount}= | ${1000}
+# Traffic profile
+| ${traffic_profile}= | trex-stl-2n-ethip4-ip4src253
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with IPsec SPD rules.\
+| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
+| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| |
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
+| | ... | Type: integer, string
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| |
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| |
+| | Set Test Variable | \${frame_size}
+| |
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Enable SPD flow cache IPv4 Outbound
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
+| | And Initialize IPv4 forwarding in circular topology
+| | And VPP IPsec create SPDs match nth entry
+| | ... | ${dut1} | ${DUT1_${int}2}[0] | ${DUT1_${int}1}[0] | ${rule_amount}
+| | ... | ${local_addr_range_ip4} | ${remote_addr_range_ip4}
+| | Then Find NDR and PDR intervals using optimized search
+
+*** Test Cases ***
+| 64B-1c-ethip4ipsec1000spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | 64B | 1C
+| | frame_size=${64} | phy_cores=${1}
+
+| 64B-2c-ethip4ipsec1000spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | 64B | 2C
+| | frame_size=${64} | phy_cores=${2}
+
+| 64B-4c-ethip4ipsec1000spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | 64B | 4C
+| | frame_size=${64} | phy_cores=${4}
+
+| 1518B-1c-ethip4ipsec1000spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| 1518B-2c-ethip4ipsec1000spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| 1518B-4c-ethip4ipsec1000spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| 9000B-1c-ethip4ipsec1000spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | 9000B | 1C
+| | frame_size=${9000} | phy_cores=${1}
+
+| 9000B-2c-ethip4ipsec1000spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | 9000B | 2C
+| | frame_size=${9000} | phy_cores=${2}
+
+| 9000B-4c-ethip4ipsec1000spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | 9000B | 4C
+| | frame_size=${9000} | phy_cores=${4}
+
+| IMIX-1c-ethip4ipsec1000spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | IMIX | 1C
+| | frame_size=IMIX_v4_1 | phy_cores=${1}
+
+| IMIX-2c-ethip4ipsec1000spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | IMIX | 2C
+| | frame_size=IMIX_v4_1 | phy_cores=${2}
+
+| IMIX-4c-ethip4ipsec1000spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | IMIX | 4C
+| | frame_size=IMIX_v4_1 | phy_cores=${4}
diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec100spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec100spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot
new file mode 100644
index 0000000000..30d5b45bab
--- /dev/null
+++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec100spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot
@@ -0,0 +1,150 @@
+# Copyright (c) 2021 PANTHEON.tech s.r.o.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+| Resource | resources/libraries/robot/crypto/ipsec.robot
+|
+| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | IP4FWD
+| ... | SCALE | IPSEC | IPSECSW | IPSECSPD | SPD_OUTBOUND | SPD_FLOW_CACHE
+| ... | SPE_100 | NOCRYPTO
+| ... | NIC_Intel-X710 | DRV_VFIO_PCI | RXQ_SIZE_0 | TXQ_SIZE_0
+| ... | ethip4ipsec100spe-cache-ip4base-policy-outbound-nocrypto
+|
+| Suite Setup | Setup suite topology interfaces | performance
+| Suite Teardown | Tear down suite | performance
+| Test Setup | Setup test | performance
+| Test Teardown | Tear down test | performance
+|
+| Test Template | Local Template
+|
+| Documentation | *RFC4301: SPD lookup performance*
+|
+| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing.
+| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing, two
+| ... | static IPv4 /24 route entries, one SPD on each outbound interface in
+| ... | each direction and ${rule amount} SPD entry(ies) in each SPD. Only
+| ... | outbound traffic is matched and only the last rule is the matching
+| ... | rule. SPD flow-cache for IPv4 outbound traffic is enabled.
+| ... | DUT1 tested with ${nic_name}.\
+| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
+| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
+| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
+| ... | of packets transmitted. NDR and PDR are discovered for different\
+| ... | Ethernet L2 frame sizes using MLRsearch library.\
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
+| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only
+| ... | the lowest priority rule matching the traffic. The action of the
+| ... | matching rule is BYPASS. No encryption or authentication is done.
+| ... | *[Ref] Applicable standard specifications:* RFC4301 and RFC2544.
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
+| ${crypto_type}= | ${None}
+| ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
+| ${nic_rxq_size}= | 0
+| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
+| ${osi_layer}= | L3
+| ${overhead}= | ${0}
+| ${remote_addr_range_ip4}= | 20.20.20.0/24
+| ${local_addr_range_ip4}= | 10.10.10.0/24
+| ${rule_amount}= | ${100}
+# Traffic profile
+| ${traffic_profile}= | trex-stl-2n-ethip4-ip4src253
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with IPsec SPD rules.\
+| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
+| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| |
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
+| | ... | Type: integer, string
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| |
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| |
+| | Set Test Variable | \${frame_size}
+| |
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Enable SPD flow cache IPv4 Outbound
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
+| | And Initialize IPv4 forwarding in circular topology
+| | And VPP IPsec create SPDs match nth entry
+| | ... | ${dut1} | ${DUT1_${int}2}[0] | ${DUT1_${int}1}[0] | ${rule_amount}
+| | ... | ${local_addr_range_ip4} | ${remote_addr_range_ip4}
+| | Then Find NDR and PDR intervals using optimized search
+
+*** Test Cases ***
+| 64B-1c-ethip4ipsec100spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | 64B | 1C
+| | frame_size=${64} | phy_cores=${1}
+
+| 64B-2c-ethip4ipsec100spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | 64B | 2C
+| | frame_size=${64} | phy_cores=${2}
+
+| 64B-4c-ethip4ipsec100spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | 64B | 4C
+| | frame_size=${64} | phy_cores=${4}
+
+| 1518B-1c-ethip4ipsec100spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| 1518B-2c-ethip4ipsec100spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| 1518B-4c-ethip4ipsec100spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| 9000B-1c-ethip4ipsec100spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | 9000B | 1C
+| | frame_size=${9000} | phy_cores=${1}
+
+| 9000B-2c-ethip4ipsec100spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | 9000B | 2C
+| | frame_size=${9000} | phy_cores=${2}
+
+| 9000B-4c-ethip4ipsec100spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | 9000B | 4C
+| | frame_size=${9000} | phy_cores=${4}
+
+| IMIX-1c-ethip4ipsec100spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | IMIX | 1C
+| | frame_size=IMIX_v4_1 | phy_cores=${1}
+
+| IMIX-2c-ethip4ipsec100spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | IMIX | 2C
+| | frame_size=IMIX_v4_1 | phy_cores=${2}
+
+| IMIX-4c-ethip4ipsec100spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | IMIX | 4C
+| | frame_size=IMIX_v4_1 | phy_cores=${4}
diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec10spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec10spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot
new file mode 100644
index 0000000000..0ad9885fab
--- /dev/null
+++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec10spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot
@@ -0,0 +1,150 @@
+# Copyright (c) 2021 PANTHEON.tech s.r.o.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+| Resource | resources/libraries/robot/crypto/ipsec.robot
+|
+| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | IP4FWD
+| ... | SCALE | IPSEC | IPSECSW | IPSECSPD | SPD_OUTBOUND | SPD_FLOW_CACHE
+| ... | SPE_10 | NOCRYPTO
+| ... | NIC_Intel-X710 | DRV_VFIO_PCI | RXQ_SIZE_0 | TXQ_SIZE_0
+| ... | ethip4ipsec10spe-cache-ip4base-policy-outbound-nocrypto
+|
+| Suite Setup | Setup suite topology interfaces | performance
+| Suite Teardown | Tear down suite | performance
+| Test Setup | Setup test | performance
+| Test Teardown | Tear down test | performance
+|
+| Test Template | Local Template
+|
+| Documentation | *RFC4301: SPD lookup performance*
+|
+| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing.
+| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing, two
+| ... | static IPv4 /24 route entries, one SPD on each outbound interface in
+| ... | each direction and ${rule amount} SPD entry(ies) in each SPD. Only
+| ... | outbound traffic is matched and only the last rule is the matching
+| ... | rule. SPD flow-cache for IPv4 outbound traffic is enabled.
+| ... | DUT1 tested with ${nic_name}.\
+| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
+| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
+| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
+| ... | of packets transmitted. NDR and PDR are discovered for different\
+| ... | Ethernet L2 frame sizes using MLRsearch library.\
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
+| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only
+| ... | the lowest priority rule matching the traffic. The action of the
+| ... | matching rule is BYPASS. No encryption or authentication is done.
+| ... | *[Ref] Applicable standard specifications:* RFC4301 and RFC2544.
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
+| ${crypto_type}= | ${None}
+| ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
+| ${nic_rxq_size}= | 0
+| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
+| ${osi_layer}= | L3
+| ${overhead}= | ${0}
+| ${remote_addr_range_ip4}= | 20.20.20.0/24
+| ${local_addr_range_ip4}= | 10.10.10.0/24
+| ${rule_amount}= | ${10}
+# Traffic profile
+| ${traffic_profile}= | trex-stl-2n-ethip4-ip4src253
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with IPsec SPD rules.\
+| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
+| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| |
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
+| | ... | Type: integer, string
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| |
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| |
+| | Set Test Variable | \${frame_size}
+| |
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Enable SPD flow cache IPv4 Outbound
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
+| | And Initialize IPv4 forwarding in circular topology
+| | And VPP IPsec create SPDs match nth entry
+| | ... | ${dut1} | ${DUT1_${int}2}[0] | ${DUT1_${int}1}[0] | ${rule_amount}
+| | ... | ${local_addr_range_ip4} | ${remote_addr_range_ip4}
+| | Then Find NDR and PDR intervals using optimized search
+
+*** Test Cases ***
+| 64B-1c-ethip4ipsec10spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | 64B | 1C
+| | frame_size=${64} | phy_cores=${1}
+
+| 64B-2c-ethip4ipsec10spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | 64B | 2C
+| | frame_size=${64} | phy_cores=${2}
+
+| 64B-4c-ethip4ipsec10spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | 64B | 4C
+| | frame_size=${64} | phy_cores=${4}
+
+| 1518B-1c-ethip4ipsec10spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| 1518B-2c-ethip4ipsec10spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| 1518B-4c-ethip4ipsec10spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| 9000B-1c-ethip4ipsec10spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | 9000B | 1C
+| | frame_size=${9000} | phy_cores=${1}
+
+| 9000B-2c-ethip4ipsec10spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | 9000B | 2C
+| | frame_size=${9000} | phy_cores=${2}
+
+| 9000B-4c-ethip4ipsec10spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | 9000B | 4C
+| | frame_size=${9000} | phy_cores=${4}
+
+| IMIX-1c-ethip4ipsec10spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | IMIX | 1C
+| | frame_size=IMIX_v4_1 | phy_cores=${1}
+
+| IMIX-2c-ethip4ipsec10spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | IMIX | 2C
+| | frame_size=IMIX_v4_1 | phy_cores=${2}
+
+| IMIX-4c-ethip4ipsec10spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | IMIX | 4C
+| | frame_size=IMIX_v4_1 | phy_cores=${4}
diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot
new file mode 100644
index 0000000000..dbc4bc4432
--- /dev/null
+++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot
@@ -0,0 +1,150 @@
+# Copyright (c) 2021 PANTHEON.tech s.r.o.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+| Resource | resources/libraries/robot/crypto/ipsec.robot
+|
+| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | IP4FWD
+| ... | BASE | IPSEC | IPSECSW | IPSECSPD | SPD_OUTBOUND | SPD_FLOW_CACHE
+| ... | SPE_1 | NOCRYPTO
+| ... | NIC_Intel-X710 | DRV_VFIO_PCI | RXQ_SIZE_0 | TXQ_SIZE_0
+| ... | ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto
+|
+| Suite Setup | Setup suite topology interfaces | performance
+| Suite Teardown | Tear down suite | performance
+| Test Setup | Setup test | performance
+| Test Teardown | Tear down test | performance
+|
+| Test Template | Local Template
+|
+| Documentation | *RFC4301: SPD lookup performance*
+|
+| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing.
+| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing, two
+| ... | static IPv4 /24 route entries, one SPD on each outbound interface in
+| ... | each direction and ${rule amount} SPD entry(ies) in each SPD. Only
+| ... | outbound traffic is matched and only the last rule is the matching
+| ... | rule. SPD flow-cache for IPv4 outbound traffic is enabled.
+| ... | DUT1 tested with ${nic_name}.\
+| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
+| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
+| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
+| ... | of packets transmitted. NDR and PDR are discovered for different\
+| ... | Ethernet L2 frame sizes using MLRsearch library.\
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
+| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only
+| ... | the lowest priority rule matching the traffic. The action of the
+| ... | matching rule is BYPASS. No encryption or authentication is done.
+| ... | *[Ref] Applicable standard specifications:* RFC4301 and RFC2544.
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
+| ${crypto_type}= | ${None}
+| ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
+| ${nic_rxq_size}= | 0
+| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
+| ${osi_layer}= | L3
+| ${overhead}= | ${0}
+| ${remote_addr_range_ip4}= | 20.20.20.0/24
+| ${local_addr_range_ip4}= | 10.10.10.0/24
+| ${rule_amount}= | ${1}
+# Traffic profile
+| ${traffic_profile}= | trex-stl-2n-ethip4-ip4src253
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with IPsec SPD rules.\
+| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
+| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| |
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
+| | ... | Type: integer, string
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| |
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| |
+| | Set Test Variable | \${frame_size}
+| |
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Enable SPD flow cache IPv4 Outbound
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
+| | And Initialize IPv4 forwarding in circular topology
+| | And VPP IPsec create SPDs match nth entry
+| | ... | ${dut1} | ${DUT1_${int}2}[0] | ${DUT1_${int}1}[0] | ${rule_amount}
+| | ... | ${local_addr_range_ip4} | ${remote_addr_range_ip4}
+| | Then Find NDR and PDR intervals using optimized search
+
+*** Test Cases ***
+| 64B-1c-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | 64B | 1C
+| | frame_size=${64} | phy_cores=${1}
+
+| 64B-2c-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | 64B | 2C
+| | frame_size=${64} | phy_cores=${2}
+
+| 64B-4c-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | 64B | 4C
+| | frame_size=${64} | phy_cores=${4}
+
+| 1518B-1c-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| 1518B-2c-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| 1518B-4c-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| 9000B-1c-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | 9000B | 1C
+| | frame_size=${9000} | phy_cores=${1}
+
+| 9000B-2c-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | 9000B | 2C
+| | frame_size=${9000} | phy_cores=${2}
+
+| 9000B-4c-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | 9000B | 4C
+| | frame_size=${9000} | phy_cores=${4}
+
+| IMIX-1c-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | IMIX | 1C
+| | frame_size=IMIX_v4_1 | phy_cores=${1}
+
+| IMIX-2c-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | IMIX | 2C
+| | frame_size=IMIX_v4_1 | phy_cores=${2}
+
+| IMIX-4c-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
+| | [Tags] | IMIX | 4C
+| | frame_size=IMIX_v4_1 | phy_cores=${4}