aboutsummaryrefslogtreecommitdiffstats
path: root/tests/vpp
diff options
context:
space:
mode:
Diffstat (limited to 'tests/vpp')
-rw-r--r--tests/vpp/perf/lb/2n1l-10ge2p1x710-ethip4-loadbalancer-l3dsr-ndrpdr.robot131
-rw-r--r--tests/vpp/perf/lb/2n1l-10ge2p1x710-ethip4-loadbalancer-maglev-ndrpdr.robot2
-rw-r--r--tests/vpp/perf/lb/2n1l-10ge2p1x710-ethip4-loadbalancer-nat4-ndrpdr.robot130
3 files changed, 262 insertions, 1 deletions
diff --git a/tests/vpp/perf/lb/2n1l-10ge2p1x710-ethip4-loadbalancer-l3dsr-ndrpdr.robot b/tests/vpp/perf/lb/2n1l-10ge2p1x710-ethip4-loadbalancer-l3dsr-ndrpdr.robot
new file mode 100644
index 0000000000..16e6e6011c
--- /dev/null
+++ b/tests/vpp/perf/lb/2n1l-10ge2p1x710-ethip4-loadbalancer-l3dsr-ndrpdr.robot
@@ -0,0 +1,131 @@
+# Copyright (c) 2019 Intel and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+| ...
+| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
+| ... | NIC_Intel-X710 | ETH | IP4 | LOADBALANCER_L3DSR | DRV_VFIO_PCI
+| ...
+| Suite Setup | Setup suite single link | performance
+| Suite Teardown | Tear down suite | performance
+| Test Setup | Setup test
+| Test Teardown | Tear down test | performance
+| ...
+| Test Template | Local Template
+| ...
+| Documentation | *RFC2544: Pkt throughput loadbalancer l3dsr test cases*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for LoadBalancer l3dsr.
+| ... | *[Cfg] DUT configuration:* DUT1 is configured with LoadBalancer\
+| ... | l3dsr and one static IPv4 /24 route entries. DUT1 tested with\
+| ... | ${nic_name}.
+| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
+| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
+| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
+| ... | of packets transmitted. NDR and PDR are discovered for different\
+| ... | Ethernet L2 frame sizes using MLRsearch library.\
+| ... | Test packets are generated by TG on links to DUT. TG traffic profile\
+| ... | contains two L4 flow-groups (l3dsr use flow-group is only from TG\
+| ... | to DUT, 6 flows for flow-group) with all packets containing Ethernet\
+| ... | header, IPv4 header with IP protocol=17 and static payload. MAC\
+| ... | addresses are matching MAC addresses of the TG node interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC2544.
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | lb_plugin.so
+| ${crypto_type}= | ${None}
+| ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
+| ${overhead}= | ${0}
+# Traffic profile:
+| ${traffic_profile}= | trex-sl-2n-ethip4udp-lb
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Cfg] DUT runs LoadBalancer l3dsr config.\
+| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
+| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ...
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
+| | ... | Type: integer, string
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| | ...
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| | ...
+| | Set Test Variable | \${frame_size}
+| | ...
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
+| | And Initialize loadbalancer l3dsr
+| | Then Find NDR and PDR intervals using optimized search
+| | ... | traffic_directions=${1}
+
+*** Test Cases ***
+| tc01-64B-1c-ethip4-loadbalancer-l3dsr-ndrpdr
+| | [Tags] | 64B | 1C
+| | frame_size=${64} | phy_cores=${1}
+
+| tc02-64B-2c-ethip4-loadbalancer-l3dsr-ndrpdr
+| | [Tags] | 64B | 2C
+| | frame_size=${64} | phy_cores=${2}
+
+| tc03-64B-4c-ethip4-loadbalancer-l3dsr-ndrpdr
+| | [Tags] | 64B | 4C
+| | frame_size=${64} | phy_cores=${4}
+
+| tc04-1518B-1c-ethip4-loadbalancer-l3dsr-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| tc05-1518B-2c-ethip4-loadbalancer-l3dsr-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| tc06-1518B-4c-ethip4-loadbalancer-l3dsr-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| tc07-9000B-1c-ethip4-loadbalancer-l3dsr-ndrpdr
+| | [Tags] | 9000B | 1C
+| | frame_size=${9000} | phy_cores=${1}
+
+| tc08-9000B-2c-ethip4-loadbalancer-l3dsr-ndrpdr
+| | [Tags] | 9000B | 2C
+| | frame_size=${9000} | phy_cores=${2}
+
+| tc09-9000B-4c-ethip4-loadbalancer-l3dsr-ndrpdr
+| | [Tags] | 9000B | 4C
+| | frame_size=${9000} | phy_cores=${4}
+
+| tc10-IMIX-1c-ethip4-loadbalancer-l3dsr-ndrpdr
+| | [Tags] | IMIX | 1C
+| | frame_size=IMIX_v4_1 | phy_cores=${1}
+
+| tc11-IMIX-2c-ethip4-loadbalancer-l3dsr-ndrpdr
+| | [Tags] | IMIX | 2C
+| | frame_size=IMIX_v4_1 | phy_cores=${2}
+
+| tc12-IMIX-4c-ethip4-loadbalancer-l3dsr-ndrpdr
+| | [Tags] | IMIX | 4C
+| | frame_size=IMIX_v4_1 | phy_cores=${4}
diff --git a/tests/vpp/perf/lb/2n1l-10ge2p1x710-ethip4-loadbalancer-maglev-ndrpdr.robot b/tests/vpp/perf/lb/2n1l-10ge2p1x710-ethip4-loadbalancer-maglev-ndrpdr.robot
index 4e26e7a188..e5d421ff86 100644
--- a/tests/vpp/perf/lb/2n1l-10ge2p1x710-ethip4-loadbalancer-maglev-ndrpdr.robot
+++ b/tests/vpp/perf/lb/2n1l-10ge2p1x710-ethip4-loadbalancer-maglev-ndrpdr.robot
@@ -15,7 +15,7 @@
| Resource | resources/libraries/robot/shared/default.robot
| ...
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | IP4 | LOADBALANCER | DRV_VFIO_PCI
+| ... | NIC_Intel-X710 | ETH | IP4 | LOADBALANCER_MAGLEV | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
diff --git a/tests/vpp/perf/lb/2n1l-10ge2p1x710-ethip4-loadbalancer-nat4-ndrpdr.robot b/tests/vpp/perf/lb/2n1l-10ge2p1x710-ethip4-loadbalancer-nat4-ndrpdr.robot
new file mode 100644
index 0000000000..8b7bd42d4a
--- /dev/null
+++ b/tests/vpp/perf/lb/2n1l-10ge2p1x710-ethip4-loadbalancer-nat4-ndrpdr.robot
@@ -0,0 +1,130 @@
+# Copyright (c) 2019 Intel and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+| ...
+| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
+| ... | NIC_Intel-X710 | ETH | IP4 | LOADBALANCER_NAT4 | DRV_VFIO_PCI
+| ...
+| Suite Setup | Setup suite single link | performance
+| Suite Teardown | Tear down suite | performance
+| Test Setup | Setup test
+| Test Teardown | Tear down test | performance
+| ...
+| Test Template | Local Template
+| ...
+| Documentation | *RFC2544: Pkt throughput loadbalancer nat4 test cases*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for LoadBalancer nat4.
+| ... | *[Cfg] DUT configuration:* DUT1 is configured with LoadBalancer\
+| ... | nat4 and two static IPv4 /24 route entries. DUT1 tested with\
+| ... | ${nic_name}.
+| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
+| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
+| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
+| ... | of packets transmitted. NDR and PDR are discovered for different\
+| ... | Ethernet L2 frame sizes using MLRsearch library.\
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
+| ... | contains two L4 flow-groups (flow-group per direction, 6 flows per\
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header\
+| ... | with IP protocol=17 and static payload. MAC addresses are matching MAC\
+| ... | addresses of the TG node interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC2544.
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | lb_plugin.so
+| ${crypto_type}= | ${None}
+| ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
+| ${overhead}= | ${0}
+# Traffic profile:
+| ${traffic_profile}= | trex-sl-2n-ethip4udp-lb
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Cfg] DUT runs LoadBalancer nat4 config.\
+| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
+| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| | ...
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
+| | ... | Type: integer, string
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| | ...
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| | ...
+| | Set Test Variable | \${frame_size}
+| | ...
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
+| | And Initialize loadbalancer nat4
+| | Then Find NDR and PDR intervals using optimized search
+
+*** Test Cases ***
+| tc01-64B-1c-ethip4-loadbalancer-nat4-ndrpdr
+| | [Tags] | 64B | 1C
+| | frame_size=${64} | phy_cores=${1}
+
+| tc02-64B-2c-ethip4-loadbalancer-nat4-ndrpdr
+| | [Tags] | 64B | 2C
+| | frame_size=${64} | phy_cores=${2}
+
+| tc03-64B-4c-ethip4-loadbalancer-nat4-ndrpdr
+| | [Tags] | 64B | 4C
+| | frame_size=${64} | phy_cores=${4}
+
+| tc04-1518B-1c-ethip4-loadbalancer-nat4-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| tc05-1518B-2c-ethip4-loadbalancer-nat4-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| tc06-1518B-4c-ethip4-loadbalancer-nat4-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| tc07-9000B-1c-ethip4-loadbalancer-nat4-ndrpdr
+| | [Tags] | 9000B | 1C
+| | frame_size=${9000} | phy_cores=${1}
+
+| tc08-9000B-2c-ethip4-loadbalancer-nat4-ndrpdr
+| | [Tags] | 9000B | 2C
+| | frame_size=${9000} | phy_cores=${2}
+
+| tc09-9000B-4c-ethip4-loadbalancer-nat4-ndrpdr
+| | [Tags] | 9000B | 4C
+| | frame_size=${9000} | phy_cores=${4}
+
+| tc10-IMIX-1c-ethip4-loadbalancer-nat4-ndrpdr
+| | [Tags] | IMIX | 1C
+| | frame_size=IMIX_v4_1 | phy_cores=${1}
+
+| tc11-IMIX-2c-ethip4-loadbalancer-nat4-ndrpdr
+| | [Tags] | IMIX | 2C
+| | frame_size=IMIX_v4_1 | phy_cores=${2}
+
+| tc12-IMIX-4c-ethip4-loadbalancer-nat4-ndrpdr
+| | [Tags] | IMIX | 4C
+| | frame_size=IMIX_v4_1 | phy_cores=${4}