diff options
Diffstat (limited to 'tests/vpp')
96 files changed, 15736 insertions, 0 deletions
diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf.robot new file mode 100644 index 0000000000..cd6c0927f2 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf.robot @@ -0,0 +1,167 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | RECONF +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_10000 +| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | 1_ADDED_TUNNEL | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | and sends back to TG. +| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ +| ... | with zero packet loss tolerance, then measures loss at this load\ +| ... | while additional tunnels are configured.\ +| ... | Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains one L3 flow-groups +| ... | (flow-group per direction, number of flows per flow-group equals to +| ... | number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${62} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${10000} +| ${n_added_tunnels}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_256 config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA 256 128 +| | +| | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels} +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch +| | Start Traffic on Background | ${unidirectional_throughput} +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_tunnels} +| | ${result}= | Stop Running Traffic +| | Display Reconfig Test Message | ${result} + +*** Test Cases *** +| 64B-1c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf.robot new file mode 100644 index 0000000000..f7c2f01bb5 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf.robot @@ -0,0 +1,167 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | RECONF +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_10000 +| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | 1_ADDED_TUNNEL | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | and sends back to TG. +| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ +| ... | with zero packet loss tolerance, then measures loss at this load\ +| ... | while additional tunnels are configured.\ +| ... | Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains one L3 flow-groups +| ... | (flow-group per direction, number of flows per flow-group equals to +| ... | number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${78} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${10000} +| ${n_added_tunnels}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA 512 256 +| | +| | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels} +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch +| | Start Traffic on Background | ${unidirectional_throughput} +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_tunnels} +| | ${result}= | Stop Running Traffic +| | Display Reconfig Test Message | ${result} + +*** Test Cases *** +| 64B-1c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf.robot new file mode 100644 index 0000000000..145e80bc57 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf.robot @@ -0,0 +1,168 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | RECONF +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_10000 +| ... | AES_128_GCM | AES | 1_ADDED_TUNNEL | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128gcm-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | and sends back to TG. +| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ +| ... | with zero packet loss tolerance, then measures loss at this load\ +| ... | while additional tunnels are configured.\ +| ... | Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains one L3 flow-groups +| ... | (flow-group per direction, number of flows per flow-group equals to +| ... | number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${10000} +| ${n_added_tunnels}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES GCM 128 +| | ${auth_alg}= | Set Variable | ${NONE} +| | ${ipsec_proto} = | IPsec Proto ESP +| | +| | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels} +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch +| | Start Traffic on Background | ${unidirectional_throughput} +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_tunnels} +| | ${result}= | Stop Running Traffic +| | Display Reconfig Test Message | ${result} + +*** Test Cases *** +| 64B-1c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf.robot new file mode 100644 index 0000000000..69d1cd51c0 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf.robot @@ -0,0 +1,168 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | RECONF +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_10000 +| ... | AES_256_GCM | AES | 1_ADDED_TUNNEL | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes256gcm-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | and sends back to TG. +| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ +| ... | with zero packet loss tolerance, then measures loss at this load\ +| ... | while additional tunnels are configured.\ +| ... | Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains one L3 flow-groups +| ... | (flow-group per direction, number of flows per flow-group equals to +| ... | number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${10000} +| ${n_added_tunnels}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES GCM 256 +| | ${auth_alg}= | Set Variable | ${NONE} +| | ${ipsec_proto} = | IPsec Proto ESP +| | +| | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels} +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch +| | Start Traffic on Background | ${unidirectional_throughput} +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_tunnels} +| | ${result}= | Stop Running Traffic +| | Display Reconfig Test Message | ${result} + +*** Test Cases *** +| 64B-1c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr.robot new file mode 100644 index 0000000000..ec837e592d --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr.robot @@ -0,0 +1,159 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_10000 +| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | and sends back to TG. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on links to DUTs. +| ... | TG traffic profile contains one L3 flow-groups (number of flows +| ... | per flow-group equals to number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${62} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${10000} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_256 config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA 256 128 +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot new file mode 100644 index 0000000000..4213b37388 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot @@ -0,0 +1,159 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_10000 +| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | and sends back to TG. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on links to DUTs. +| ... | TG traffic profile contains one L3 flow-groups (number of flows +| ... | per flow-group equals to number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${78} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${10000} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA 512 256 +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot new file mode 100644 index 0000000000..7a7db62cba --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot @@ -0,0 +1,160 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_10000 +| ... | AES_128_GCM | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec10000tnlsw-ip4base-int-aes128gcm-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | and sends back to TG. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on links to DUTs. +| ... | TG traffic profile contains one L3 flow-groups (number of flows +| ... | per flow-group equals to number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${10000} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg} = | Crypto Alg AES GCM 128 +| | ${auth_alg} = | Set Variable | ${NONE} +| | ${ipsec_proto} = | IPsec Proto ESP +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec10000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec10000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec10000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec10000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec10000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec10000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec10000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec10000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec10000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec10000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec10000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec10000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot new file mode 100644 index 0000000000..a03456595a --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot @@ -0,0 +1,160 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_10000 +| ... | AES_256_GCM | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec10000tnlsw-ip4base-int-aes256gcm-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | and sends back to TG. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on links to DUTs. +| ... | TG traffic profile contains one L3 flow-groups (number of flows +| ... | per flow-group equals to number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${10000} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg} = | Crypto Alg AES GCM 256 +| | ${auth_alg} = | Set Variable | ${NONE} +| | ${ipsec_proto} = | IPsec Proto ESP +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec10000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec10000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec10000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec10000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec10000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec10000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec10000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec10000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec10000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec10000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec10000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec10000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf.robot new file mode 100644 index 0000000000..c48c06043b --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf.robot @@ -0,0 +1,167 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | RECONF +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_1000 +| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | 1_ADDED_TUNNEL | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | and sends back to TG. +| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ +| ... | with zero packet loss tolerance, then measures loss at this load\ +| ... | while additional tunnels are configured.\ +| ... | Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains one L3 flow-groups +| ... | (flow-group per direction, number of flows per flow-group equals to +| ... | number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${62} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${1000} +| ${n_added_tunnels}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_256 config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA 256 128 +| | +| | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels} +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch +| | Start Traffic on Background | ${unidirectional_throughput} +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_tunnels} +| | ${result}= | Stop Running Traffic +| | Display Reconfig Test Message | ${result} + +*** Test Cases *** +| 64B-1c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf.robot new file mode 100644 index 0000000000..aa637ea153 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf.robot @@ -0,0 +1,167 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | RECONF +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_1000 +| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | 1_ADDED_TUNNEL | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | and sends back to TG. +| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ +| ... | with zero packet loss tolerance, then measures loss at this load\ +| ... | while additional tunnels are configured.\ +| ... | Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains one L3 flow-groups +| ... | (flow-group per direction, number of flows per flow-group equals to +| ... | number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${78} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${1000} +| ${n_added_tunnels}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA 512 256 +| | +| | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels} +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch +| | Start Traffic on Background | ${unidirectional_throughput} +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_tunnels} +| | ${result}= | Stop Running Traffic +| | Display Reconfig Test Message | ${result} + +*** Test Cases *** +| 64B-1c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf.robot new file mode 100644 index 0000000000..bd6ee17689 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf.robot @@ -0,0 +1,168 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | RECONF +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_1000 +| ... | AES_128_GCM | AES | 1_ADDED_TUNNEL | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128gcm-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | and sends back to TG. +| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ +| ... | with zero packet loss tolerance, then measures loss at this load\ +| ... | while additional tunnels are configured.\ +| ... | Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains one L3 flow-groups +| ... | (flow-group per direction, number of flows per flow-group equals to +| ... | number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${1000} +| ${n_added_tunnels}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES GCM 128 +| | ${auth_alg}= | Set Variable | ${NONE} +| | ${ipsec_proto} = | IPsec Proto ESP +| | +| | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels} +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch +| | Start Traffic on Background | ${unidirectional_throughput} +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_tunnels} +| | ${result}= | Stop Running Traffic +| | Display Reconfig Test Message | ${result} + +*** Test Cases *** +| 64B-1c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf.robot new file mode 100644 index 0000000000..7558159839 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf.robot @@ -0,0 +1,168 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | RECONF +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_1000 +| ... | AES_256_GCM | AES | 1_ADDED_TUNNEL | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes256gcm-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | and sends back to TG. +| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ +| ... | with zero packet loss tolerance, then measures loss at this load\ +| ... | while additional tunnels are configured.\ +| ... | Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains one L3 flow-groups +| ... | (flow-group per direction, number of flows per flow-group equals to +| ... | number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${1000} +| ${n_added_tunnels}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES GCM 256 +| | ${auth_alg}= | Set Variable | ${NONE} +| | ${ipsec_proto} = | IPsec Proto ESP +| | +| | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels} +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch +| | Start Traffic on Background | ${unidirectional_throughput} +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_tunnels} +| | ${result}= | Stop Running Traffic +| | Display Reconfig Test Message | ${result} + +*** Test Cases *** +| 64B-1c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr.robot new file mode 100644 index 0000000000..062a341618 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr.robot @@ -0,0 +1,159 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_1000 +| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | and sends back to TG. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on links to DUTs. +| ... | TG traffic profile contains one L3 flow-groups (number of flows +| ... | per flow-group equals to number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${62} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${1000} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_256 config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA 256 128 +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot new file mode 100644 index 0000000000..92c4d19995 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot @@ -0,0 +1,159 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_1000 +| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | and sends back to TG. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on links to DUTs. +| ... | TG traffic profile contains one L3 flow-groups (number of flows +| ... | per flow-group equals to number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${78} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${1000} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA 512 256 +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot new file mode 100644 index 0000000000..b7588eb71c --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot @@ -0,0 +1,160 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_1000 +| ... | AES_128_GCM | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec1000tnlsw-ip4base-int-aes128gcm-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | and sends back to TG. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on links to DUTs. +| ... | TG traffic profile contains one L3 flow-groups (number of flows +| ... | per flow-group equals to number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${1000} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg} = | Crypto Alg AES GCM 128 +| | ${auth_alg} = | Set Variable | ${NONE} +| | ${ipsec_proto} = | IPsec Proto ESP +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec1000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec1000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec1000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec1000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec1000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec1000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec1000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec1000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec1000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec1000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec1000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec1000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot new file mode 100644 index 0000000000..b710ddd7e9 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot @@ -0,0 +1,160 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_1000 +| ... | AES_256_GCM | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec1000tnlsw-ip4base-int-aes256gcm-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | and sends back to TG. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on links to DUTs. +| ... | TG traffic profile contains one L3 flow-groups (number of flows +| ... | per flow-group equals to number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${1000} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg} = | Crypto Alg AES GCM 256 +| | ${auth_alg} = | Set Variable | ${NONE} +| | ${ipsec_proto} = | IPsec Proto ESP +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec1000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec1000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec1000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec1000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec1000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec1000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec1000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec1000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec1000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec1000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec1000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec1000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf.robot new file mode 100644 index 0000000000..bbd5b08488 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf.robot @@ -0,0 +1,167 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | RECONF +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | BASE | TNL_1 +| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | 1_ADDED_TUNNEL | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | and sends back to TG. +| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ +| ... | with zero packet loss tolerance, then measures loss at this load\ +| ... | while additional tunnels are configured.\ +| ... | Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains one L3 flow-groups +| ... | (flow-group per direction, number of flows per flow-group equals to +| ... | number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${62} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${1} +| ${n_added_tunnels}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_256 config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA 256 128 +| | +| | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels} +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch +| | Start Traffic on Background | ${unidirectional_throughput} +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_tunnels} +| | ${result}= | Stop Running Traffic +| | Display Reconfig Test Message | ${result} + +*** Test Cases *** +| 64B-1c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf.robot new file mode 100644 index 0000000000..7fec567c26 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf.robot @@ -0,0 +1,167 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | RECONF +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | BASE | TNL_1 +| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | 1_ADDED_TUNNEL | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | and sends back to TG. +| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ +| ... | with zero packet loss tolerance, then measures loss at this load\ +| ... | while additional tunnels are configured.\ +| ... | Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains one L3 flow-groups +| ... | (flow-group per direction, number of flows per flow-group equals to +| ... | number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${78} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${1} +| ${n_added_tunnels}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA 512 256 +| | +| | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels} +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch +| | Start Traffic on Background | ${unidirectional_throughput} +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_tunnels} +| | ${result}= | Stop Running Traffic +| | Display Reconfig Test Message | ${result} + +*** Test Cases *** +| 64B-1c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf.robot new file mode 100644 index 0000000000..9fe04a3438 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf.robot @@ -0,0 +1,168 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | RECONF +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | BASE | TNL_1 +| ... | AES_128_GCM | AES | 1_ADDED_TUNNEL | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128gcm-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | and sends back to TG. +| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ +| ... | with zero packet loss tolerance, then measures loss at this load\ +| ... | while additional tunnels are configured.\ +| ... | Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains one L3 flow-groups +| ... | (flow-group per direction, number of flows per flow-group equals to +| ... | number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${1} +| ${n_added_tunnels}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES GCM 128 +| | ${auth_alg}= | Set Variable | ${NONE} +| | ${ipsec_proto} = | IPsec Proto ESP +| | +| | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels} +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch +| | Start Traffic on Background | ${unidirectional_throughput} +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_tunnels} +| | ${result}= | Stop Running Traffic +| | Display Reconfig Test Message | ${result} + +*** Test Cases *** +| 64B-1c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf.robot new file mode 100644 index 0000000000..7082d19251 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf.robot @@ -0,0 +1,168 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | RECONF +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | BASE | TNL_1 +| ... | AES_256_GCM | AES | 1_ADDED_TUNNEL | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec1tnlsw-1atnl-ip4base-int-aes256gcm-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | and sends back to TG. +| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ +| ... | with zero packet loss tolerance, then measures loss at this load\ +| ... | while additional tunnels are configured.\ +| ... | Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains one L3 flow-groups +| ... | (flow-group per direction, number of flows per flow-group equals to +| ... | number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${1} +| ${n_added_tunnels}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES GCM 256 +| | ${auth_alg}= | Set Variable | ${NONE} +| | ${ipsec_proto} = | IPsec Proto ESP +| | +| | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels} +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch +| | Start Traffic on Background | ${unidirectional_throughput} +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_tunnels} +| | ${result}= | Stop Running Traffic +| | Display Reconfig Test Message | ${result} + +*** Test Cases *** +| 64B-1c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr.robot new file mode 100644 index 0000000000..31a0c5d2c2 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr.robot @@ -0,0 +1,159 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | BASE | TNL_1 +| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac256sha-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | and sends back to TG. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on links to DUTs. +| ... | TG traffic profile contains one L3 flow-groups (number of flows +| ... | per flow-group equals to number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${62} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_256 config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA 256 128 +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot new file mode 100644 index 0000000000..a890d115e3 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot @@ -0,0 +1,159 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | BASE | TNL_1 +| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | and sends back to TG. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on links to DUTs. +| ... | TG traffic profile contains one L3 flow-groups (number of flows +| ... | per flow-group equals to number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${78} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA 512 256 +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot new file mode 100644 index 0000000000..992360b3f0 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot @@ -0,0 +1,160 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | BASE | TNL_1 +| ... | AES_128_GCM | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec1tnlsw-ip4base-int-aes128gcm-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | and sends back to TG. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on links to DUTs. +| ... | TG traffic profile contains one L3 flow-groups (number of flows +| ... | per flow-group equals to number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg} = | Crypto Alg AES GCM 128 +| | ${auth_alg} = | Set Variable | ${NONE} +| | ${ipsec_proto} = | IPsec Proto ESP +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec1tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec1tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec1tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec1tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec1tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec1tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec1tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec1tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec1tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec1tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec1tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec1tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot new file mode 100644 index 0000000000..985d86179f --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot @@ -0,0 +1,160 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | BASE | TNL_1 +| ... | AES_256_GCM | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec1tnlsw-ip4base-int-aes256gcm-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | and sends back to TG. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on links to DUTs. +| ... | TG traffic profile contains one L3 flow-groups (number of flows +| ... | per flow-group equals to number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg} = | Crypto Alg AES GCM 256 +| | ${auth_alg} = | Set Variable | ${NONE} +| | ${ipsec_proto} = | IPsec Proto ESP +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec1tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec1tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec1tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec1tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec1tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec1tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec1tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec1tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec1tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec1tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec1tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec1tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr.robot new file mode 100644 index 0000000000..94e45a2d5b --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr.robot @@ -0,0 +1,166 @@ +# Copyright (c) 2021 Intel and/or its affiliates. +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | ASYNC | IPSECINT | NIC_Intel-X710 | BASE +| ... | SCHEDULER | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0| TNL_1 +| ... | ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128cbc-hmac256sha-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG, run with IPsec async mode and use crypto +| ... | sw scheduler engine to schedule crypto work to crypto cores. DUT gets +| ... | IPv4 traffic from TG, encrypts it and sends back to TG. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on links to DUTs. +| ... | TG traffic profile contains one L3 flow-groups (number of flows +| ... | per flow-group equals to number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_sw_scheduler_plugin.so +| ... | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${62} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${1} +| ${dp_cores}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_256 config.\ +| | ... | Each DUT uses one physical core for data plane workers +| | ... | and rest of ${phy_cores} physical core(s) for crypto workers. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Total number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${1}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${1} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA 256 128 +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Enable IPSec Async Mode on all VPP DUTs +| | And Disable Crypto Work of VPP Worker Threads on all VPP DUTs | ${dp_cores} +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-2c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-3c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 64B | 3C +| | frame_size=${64} | phy_cores=${3} + +| 64B-4c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-2c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-3c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 1518B | 3C +| | frame_size=${1518} | phy_cores=${3} + +| 1518B-4c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-2c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-3c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 9000B | 3C +| | frame_size=${9000} | phy_cores=${3} + +| 9000B-4c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-2c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-3c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | IMIX | 3C +| | frame_size=IMIX_v4_1 | phy_cores=${3} + +| IMIX-4c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot new file mode 100644 index 0000000000..d42adec82b --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot @@ -0,0 +1,166 @@ +# Copyright (c) 2021 Intel and/or its affiliates. +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | ASYNC | IPSECINT | NIC_Intel-X710 | BASE +| ... | SCHEDULER | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 | TNL_1 +| ... | ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG, run with IPsec async mode and use crypto +| ... | sw scheduler engine to schedule crypto work to crypto cores. DUT gets +| ... | IPv4 traffic from TG, encrypts it and sends back to TG. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on links to DUTs. +| ... | TG traffic profile contains one L3 flow-groups (number of flows +| ... | per flow-group equals to number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_sw_scheduler_plugin.so +| ... | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${78} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${1} +| ${dp_cores}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\ +| | ... | Each DUT uses one physical core for data plane workers +| | ... | and rest of ${phy_cores} physical core(s) for crypto workers. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Total number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${1}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${1} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA 512 256 +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Enable IPSec Async Mode on all VPP DUTs +| | And Disable Crypto Work of VPP Worker Threads on all VPP DUTs | ${dp_cores} +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-2c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-3c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 64B | 3C +| | frame_size=${64} | phy_cores=${3} + +| 64B-4c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-2c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-3c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 1518B | 3C +| | frame_size=${1518} | phy_cores=${3} + +| 1518B-4c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-2c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-3c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 9000B | 3C +| | frame_size=${9000} | phy_cores=${3} + +| 9000B-4c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-2c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-3c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | IMIX | 3C +| | frame_size=IMIX_v4_1 | phy_cores=${3} + +| IMIX-4c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr.robot new file mode 100644 index 0000000000..73c7eb1f80 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr.robot @@ -0,0 +1,166 @@ +# Copyright (c) 2021 Intel and/or its affiliates. +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | ASYNC | IPSECINT | NIC_Intel-X710 | BASE +| ... | SCHEDULER | AES_128_GCM | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 | TNL_1 +| ... | ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128gcm-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG, run with IPsec async mode and use crypto +| ... | sw scheduler engine to schedule crypto work to crypto cores. DUT gets +| ... | IPv4 traffic from TG, encrypts it and sends back to TG. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on links to DUTs. +| ... | TG traffic profile contains one L3 flow-groups (number of flows +| ... | per flow-group equals to number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_sw_scheduler_plugin.so +| ... | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${1} +| ${dp_cores}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\ +| | ... | Each DUT uses one physical core for data plane workers +| | ... | and rest of ${phy_cores} physical core(s) for crypto workers. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Total number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${1}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${1} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES GCM 128 +| | ${auth_alg}= | Set Variable | ${NONE} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Enable IPSec Async Mode on all VPP DUTs +| | And Disable Crypto Work of VPP Worker Threads on all VPP DUTs | ${dp_cores} +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-2c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-3c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 64B | 3C +| | frame_size=${64} | phy_cores=${3} + +| 64B-4c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-2c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-3c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 1518B | 3C +| | frame_size=${1518} | phy_cores=${3} + +| 1518B-4c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-2c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-3c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 9000B | 3C +| | frame_size=${9000} | phy_cores=${3} + +| 9000B-4c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-2c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-3c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | IMIX | 3C +| | frame_size=IMIX_v4_1 | phy_cores=${3} + +| IMIX-4c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr.robot new file mode 100644 index 0000000000..edc04a6ab1 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr.robot @@ -0,0 +1,166 @@ +# Copyright (c) 2021 Intel and/or its affiliates. +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | ASYNC | IPSECINT | NIC_Intel-X710 | BASE +| ... | SCHEDULER | AES_256_GCM | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 | TNL_1 +| ... | ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes256gcm-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG, run with IPsec async mode and use crypto +| ... | sw scheduler engine to schedule crypto work to crypto cores. DUT gets +| ... | IPv4 traffic from TG, encrypts it and sends back to TG. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on links to DUTs. +| ... | TG traffic profile contains one L3 flow-groups (number of flows +| ... | per flow-group equals to number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_sw_scheduler_plugin.so +| ... | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${1} +| ${dp_cores}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ +| | ... | Each DUT uses one physical core for data plane workers +| | ... | and rest of ${phy_cores} physical core(s) for crypto workers. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Total number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${1}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${1} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES GCM 256 +| | ${auth_alg}= | Set Variable | ${NONE} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Enable IPSec Async Mode on all VPP DUTs +| | And Disable Crypto Work of VPP Worker Threads on all VPP DUTs | ${dp_cores} +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-2c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-3c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 64B | 3C +| | frame_size=${64} | phy_cores=${3} + +| 64B-4c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-2c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-3c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 1518B | 3C +| | frame_size=${1518} | phy_cores=${3} + +| 1518B-4c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-2c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-3c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 9000B | 3C +| | frame_size=${9000} | phy_cores=${3} + +| 9000B-4c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-2c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-3c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | IMIX | 3C +| | frame_size=IMIX_v4_1 | phy_cores=${3} + +| IMIX-4c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf.robot new file mode 100644 index 0000000000..60044b4f16 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf.robot @@ -0,0 +1,167 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | RECONF +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_20000 +| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | 1_ADDED_TUNNEL | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | and sends back to TG. +| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ +| ... | with zero packet loss tolerance, then measures loss at this load\ +| ... | while additional tunnels are configured.\ +| ... | Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains one L3 flow-groups +| ... | (flow-group per direction, number of flows per flow-group equals to +| ... | number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${62} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${20000} +| ${n_added_tunnels}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_256 config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA 256 128 +| | +| | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels} +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch +| | Start Traffic on Background | ${unidirectional_throughput} +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_tunnels} +| | ${result}= | Stop Running Traffic +| | Display Reconfig Test Message | ${result} + +*** Test Cases *** +| 64B-1c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf.robot new file mode 100644 index 0000000000..a8ca72b8ad --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf.robot @@ -0,0 +1,167 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | RECONF +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_20000 +| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | 1_ADDED_TUNNEL | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | and sends back to TG. +| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ +| ... | with zero packet loss tolerance, then measures loss at this load\ +| ... | while additional tunnels are configured.\ +| ... | Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains one L3 flow-groups +| ... | (flow-group per direction, number of flows per flow-group equals to +| ... | number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${78} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${20000} +| ${n_added_tunnels}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA 512 256 +| | +| | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels} +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch +| | Start Traffic on Background | ${unidirectional_throughput} +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_tunnels} +| | ${result}= | Stop Running Traffic +| | Display Reconfig Test Message | ${result} + +*** Test Cases *** +| 64B-1c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf.robot new file mode 100644 index 0000000000..b7c27439a8 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf.robot @@ -0,0 +1,168 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | RECONF +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_20000 +| ... | AES_128_GCM | AES | 1_ADDED_TUNNEL | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128gcm-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | and sends back to TG. +| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ +| ... | with zero packet loss tolerance, then measures loss at this load\ +| ... | while additional tunnels are configured.\ +| ... | Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains one L3 flow-groups +| ... | (flow-group per direction, number of flows per flow-group equals to +| ... | number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${20000} +| ${n_added_tunnels}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES GCM 128 +| | ${auth_alg}= | Set Variable | ${NONE} +| | ${ipsec_proto} = | IPsec Proto ESP +| | +| | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels} +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch +| | Start Traffic on Background | ${unidirectional_throughput} +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_tunnels} +| | ${result}= | Stop Running Traffic +| | Display Reconfig Test Message | ${result} + +*** Test Cases *** +| 64B-1c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf.robot new file mode 100644 index 0000000000..1fdf4cd234 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf.robot @@ -0,0 +1,168 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | RECONF +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_20000 +| ... | AES_256_GCM | AES | 1_ADDED_TUNNEL | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes256gcm-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | and sends back to TG. +| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ +| ... | with zero packet loss tolerance, then measures loss at this load\ +| ... | while additional tunnels are configured.\ +| ... | Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains one L3 flow-groups +| ... | (flow-group per direction, number of flows per flow-group equals to +| ... | number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${20000} +| ${n_added_tunnels}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES GCM 256 +| | ${auth_alg}= | Set Variable | ${NONE} +| | ${ipsec_proto} = | IPsec Proto ESP +| | +| | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels} +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch +| | Start Traffic on Background | ${unidirectional_throughput} +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_tunnels} +| | ${result}= | Stop Running Traffic +| | Display Reconfig Test Message | ${result} + +*** Test Cases *** +| 64B-1c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec20000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec20000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr.robot new file mode 100644 index 0000000000..7430ea5eea --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec20000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr.robot @@ -0,0 +1,159 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_20000 +| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec20000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | and sends back to TG. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on links to DUTs. +| ... | TG traffic profile contains one L3 flow-groups (number of flows +| ... | per flow-group equals to number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${62} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${20000} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_256 config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA 256 128 +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec20000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec20000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec20000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec20000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec20000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec20000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec20000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec20000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec20000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec20000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec20000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec20000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec20000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec20000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot new file mode 100644 index 0000000000..1fe67ccf5c --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec20000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot @@ -0,0 +1,159 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_20000 +| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec20000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | and sends back to TG. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on links to DUTs. +| ... | TG traffic profile contains one L3 flow-groups (number of flows +| ... | per flow-group equals to number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${78} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${20000} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA 512 256 +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec20000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec20000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec20000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec20000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec20000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec20000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec20000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec20000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec20000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec20000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec20000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec20000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec20000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec20000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot new file mode 100644 index 0000000000..8032865797 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec20000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot @@ -0,0 +1,160 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_20000 +| ... | AES_128_GCM | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec20000tnlsw-ip4base-int-aes128gcm-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | and sends back to TG. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on links to DUTs. +| ... | TG traffic profile contains one L3 flow-groups (number of flows +| ... | per flow-group equals to number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${20000} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg} = | Crypto Alg AES GCM 128 +| | ${auth_alg} = | Set Variable | ${NONE} +| | ${ipsec_proto} = | IPsec Proto ESP +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec20000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec20000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec20000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec20000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec20000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec20000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec20000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec20000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec20000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec20000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec20000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec20000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec20000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec20000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot new file mode 100644 index 0000000000..08aea3dc75 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec20000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot @@ -0,0 +1,160 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_20000 +| ... | AES_256_GCM | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec20000tnlsw-ip4base-int-aes256gcm-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | and sends back to TG. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on links to DUTs. +| ... | TG traffic profile contains one L3 flow-groups (number of flows +| ... | per flow-group equals to number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${20000} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg} = | Crypto Alg AES GCM 256 +| | ${auth_alg} = | Set Variable | ${NONE} +| | ${ipsec_proto} = | IPsec Proto ESP +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec20000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec20000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec20000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec20000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec20000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec20000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec20000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec20000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec20000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec20000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec20000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec20000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr.robot new file mode 100644 index 0000000000..9a5a40deb7 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr.robot @@ -0,0 +1,166 @@ +# Copyright (c) 2021 Intel and/or its affiliates. +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | ASYNC | IPSECINT | NIC_Intel-X710 | SCALE +| ... | SCHEDULER | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0| TNL_2 +| ... | ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128cbc-hmac256sha-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG, run with IPsec async mode and use crypto +| ... | sw scheduler engine to schedule crypto work to crypto cores. DUT gets +| ... | IPv4 traffic from TG, encrypts it and sends back to TG. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on links to DUTs. +| ... | TG traffic profile contains one L3 flow-groups (number of flows +| ... | per flow-group equals to number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_sw_scheduler_plugin.so +| ... | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${62} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${2} +| ${dp_cores}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_256 config.\ +| | ... | Each DUT uses one physical core for data plane workers +| | ... | and rest of ${phy_cores} physical core(s) for crypto workers. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Total number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${1}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${1} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA 256 128 +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Enable IPSec Async Mode on all VPP DUTs +| | And Disable Crypto Work of VPP Worker Threads on all VPP DUTs | ${dp_cores} +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-2c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-3c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 64B | 3C +| | frame_size=${64} | phy_cores=${3} + +| 64B-4c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-2c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-3c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 1518B | 3C +| | frame_size=${1518} | phy_cores=${3} + +| 1518B-4c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-2c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-3c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 9000B | 3C +| | frame_size=${9000} | phy_cores=${3} + +| 9000B-4c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-2c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-3c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | IMIX | 3C +| | frame_size=IMIX_v4_1 | phy_cores=${3} + +| IMIX-4c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot new file mode 100644 index 0000000000..adfd92a128 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot @@ -0,0 +1,166 @@ +# Copyright (c) 2021 Intel and/or its affiliates. +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | ASYNC | IPSECINT | NIC_Intel-X710 | SCALE +| ... | SCHEDULER | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 | TNL_2 +| ... | ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG, run with IPsec async mode and use crypto +| ... | sw scheduler engine to schedule crypto work to crypto cores. DUT gets +| ... | IPv4 traffic from TG, encrypts it and sends back to TG. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on links to DUTs. +| ... | TG traffic profile contains one L3 flow-groups (number of flows +| ... | per flow-group equals to number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_sw_scheduler_plugin.so +| ... | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${78} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${2} +| ${dp_cores}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\ +| | ... | Each DUT uses one physical core for data plane workers +| | ... | and rest of ${phy_cores} physical core(s) for crypto workers. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Total number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${1}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${1} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA 512 256 +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Enable IPSec Async Mode on all VPP DUTs +| | And Disable Crypto Work of VPP Worker Threads on all VPP DUTs | ${dp_cores} +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-2c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-3c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 64B | 3C +| | frame_size=${64} | phy_cores=${3} + +| 64B-4c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-2c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-3c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 1518B | 3C +| | frame_size=${1518} | phy_cores=${3} + +| 1518B-4c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-2c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-3c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 9000B | 3C +| | frame_size=${9000} | phy_cores=${3} + +| 9000B-4c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-2c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-3c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | IMIX | 3C +| | frame_size=IMIX_v4_1 | phy_cores=${3} + +| IMIX-4c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr.robot new file mode 100644 index 0000000000..5166541a0e --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr.robot @@ -0,0 +1,166 @@ +# Copyright (c) 2021 Intel and/or its affiliates. +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | ASYNC | IPSECINT | NIC_Intel-X710 | SCALE +| ... | SCHEDULER | AES_128_GCM | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 | TNL_2 +| ... | ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128gcm-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG, run with IPsec async mode and use crypto +| ... | sw scheduler engine to schedule crypto work to crypto cores. DUT gets +| ... | IPv4 traffic from TG, encrypts it and sends back to TG. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on links to DUTs. +| ... | TG traffic profile contains one L3 flow-groups (number of flows +| ... | per flow-group equals to number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_sw_scheduler_plugin.so +| ... | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${2} +| ${dp_cores}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\ +| | ... | Each DUT uses one physical core for data plane workers +| | ... | and rest of ${phy_cores} physical core(s) for crypto workers. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Total number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${1}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${1} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES GCM 128 +| | ${auth_alg}= | Set Variable | ${NONE} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Enable IPSec Async Mode on all VPP DUTs +| | And Disable Crypto Work of VPP Worker Threads on all VPP DUTs | ${dp_cores} +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-2c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-3c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 64B | 3C +| | frame_size=${64} | phy_cores=${3} + +| 64B-4c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-2c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-3c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 1518B | 3C +| | frame_size=${1518} | phy_cores=${3} + +| 1518B-4c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-2c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-3c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 9000B | 3C +| | frame_size=${9000} | phy_cores=${3} + +| 9000B-4c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-2c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-3c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | IMIX | 3C +| | frame_size=IMIX_v4_1 | phy_cores=${3} + +| IMIX-4c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr.robot new file mode 100644 index 0000000000..10d7ae5e78 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr.robot @@ -0,0 +1,166 @@ +# Copyright (c) 2021 Intel and/or its affiliates. +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | ASYNC | IPSECINT | NIC_Intel-X710 | SCALE +| ... | SCHEDULER | AES_256_GCM | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 | TNL_2 +| ... | ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes256gcm-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG, run with IPsec async mode and use crypto +| ... | sw scheduler engine to schedule crypto work to crypto cores. DUT gets +| ... | IPv4 traffic from TG, encrypts it and sends back to TG. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on links to DUTs. +| ... | TG traffic profile contains one L3 flow-groups (number of flows +| ... | per flow-group equals to number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_sw_scheduler_plugin.so +| ... | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${2} +| ${dp_cores}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ +| | ... | Each DUT uses one physical core for data plane workers +| | ... | and rest of ${phy_cores} physical core(s) for crypto workers. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Total number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${1}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${1} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES GCM 256 +| | ${auth_alg}= | Set Variable | ${NONE} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Enable IPSec Async Mode on all VPP DUTs +| | And Disable Crypto Work of VPP Worker Threads on all VPP DUTs | ${dp_cores} +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-2c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-3c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 64B | 3C +| | frame_size=${64} | phy_cores=${3} + +| 64B-4c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-2c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-3c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 1518B | 3C +| | frame_size=${1518} | phy_cores=${3} + +| 1518B-4c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-2c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-3c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 9000B | 3C +| | frame_size=${9000} | phy_cores=${3} + +| 9000B-4c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-2c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-3c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | IMIX | 3C +| | frame_size=IMIX_v4_1 | phy_cores=${3} + +| IMIX-4c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf.robot new file mode 100644 index 0000000000..97ba9e99f6 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf.robot @@ -0,0 +1,167 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | RECONF +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_40000 +| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | 1_ADDED_TUNNEL | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | and sends back to TG. +| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ +| ... | with zero packet loss tolerance, then measures loss at this load\ +| ... | while additional tunnels are configured.\ +| ... | Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains one L3 flow-groups +| ... | (flow-group per direction, number of flows per flow-group equals to +| ... | number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${62} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${40000} +| ${n_added_tunnels}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_256 config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA 256 128 +| | +| | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels} +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch +| | Start Traffic on Background | ${unidirectional_throughput} +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_tunnels} +| | ${result}= | Stop Running Traffic +| | Display Reconfig Test Message | ${result} + +*** Test Cases *** +| 64B-1c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf.robot new file mode 100644 index 0000000000..2b8bb0efac --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf.robot @@ -0,0 +1,167 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | RECONF +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_40000 +| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | 1_ADDED_TUNNEL | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | and sends back to TG. +| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ +| ... | with zero packet loss tolerance, then measures loss at this load\ +| ... | while additional tunnels are configured.\ +| ... | Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains one L3 flow-groups +| ... | (flow-group per direction, number of flows per flow-group equals to +| ... | number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${78} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${40000} +| ${n_added_tunnels}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA 512 256 +| | +| | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels} +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch +| | Start Traffic on Background | ${unidirectional_throughput} +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_tunnels} +| | ${result}= | Stop Running Traffic +| | Display Reconfig Test Message | ${result} + +*** Test Cases *** +| 64B-1c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf.robot new file mode 100644 index 0000000000..5ad59a536b --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf.robot @@ -0,0 +1,168 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | RECONF +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_40000 +| ... | AES_128_GCM | AES | 1_ADDED_TUNNEL | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128gcm-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | and sends back to TG. +| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ +| ... | with zero packet loss tolerance, then measures loss at this load\ +| ... | while additional tunnels are configured.\ +| ... | Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains one L3 flow-groups +| ... | (flow-group per direction, number of flows per flow-group equals to +| ... | number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${40000} +| ${n_added_tunnels}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES GCM 128 +| | ${auth_alg}= | Set Variable | ${NONE} +| | ${ipsec_proto} = | IPsec Proto ESP +| | +| | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels} +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch +| | Start Traffic on Background | ${unidirectional_throughput} +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_tunnels} +| | ${result}= | Stop Running Traffic +| | Display Reconfig Test Message | ${result} + +*** Test Cases *** +| 64B-1c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf.robot new file mode 100644 index 0000000000..01626e7f37 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf.robot @@ -0,0 +1,168 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | RECONF +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_40000 +| ... | AES_256_GCM | AES | 1_ADDED_TUNNEL | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes256gcm-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | and sends back to TG. +| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ +| ... | with zero packet loss tolerance, then measures loss at this load\ +| ... | while additional tunnels are configured.\ +| ... | Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains one L3 flow-groups +| ... | (flow-group per direction, number of flows per flow-group equals to +| ... | number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${40000} +| ${n_added_tunnels}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES GCM 256 +| | ${auth_alg}= | Set Variable | ${NONE} +| | ${ipsec_proto} = | IPsec Proto ESP +| | +| | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels} +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch +| | Start Traffic on Background | ${unidirectional_throughput} +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_tunnels} +| | ${result}= | Stop Running Traffic +| | Display Reconfig Test Message | ${result} + +*** Test Cases *** +| 64B-1c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr.robot new file mode 100644 index 0000000000..466cd6b166 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr.robot @@ -0,0 +1,159 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_40000 +| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | and sends back to TG. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on links to DUTs. +| ... | TG traffic profile contains one L3 flow-groups (number of flows +| ... | per flow-group equals to number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${62} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${40000} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_256 config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA 256 128 +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot new file mode 100644 index 0000000000..c2d8e3dfbd --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot @@ -0,0 +1,159 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_40000 +| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | and sends back to TG. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on links to DUTs. +| ... | TG traffic profile contains one L3 flow-groups (number of flows +| ... | per flow-group equals to number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${78} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${40000} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA 512 256 +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot new file mode 100644 index 0000000000..e6857659d7 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot @@ -0,0 +1,160 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_40000 +| ... | AES_128_GCM | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec40000tnlsw-ip4base-int-aes128gcm-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | and sends back to TG. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on links to DUTs. +| ... | TG traffic profile contains one L3 flow-groups (number of flows +| ... | per flow-group equals to number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${40000} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg} = | Crypto Alg AES GCM 128 +| | ${auth_alg} = | Set Variable | ${NONE} +| | ${ipsec_proto} = | IPsec Proto ESP +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec40000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec40000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec40000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec40000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec40000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec40000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec40000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec40000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec40000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec40000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec40000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec40000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot new file mode 100644 index 0000000000..5b580a7cea --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot @@ -0,0 +1,160 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_40000 +| ... | AES_256_GCM | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec40000tnlsw-ip4base-int-aes256gcm-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | and sends back to TG. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on links to DUTs. +| ... | TG traffic profile contains one L3 flow-groups (number of flows +| ... | per flow-group equals to number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${40000} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg} = | Crypto Alg AES GCM 256 +| | ${auth_alg} = | Set Variable | ${NONE} +| | ${ipsec_proto} = | IPsec Proto ESP +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec40000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec40000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec40000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec40000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec40000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec40000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec40000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec40000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec40000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec40000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec40000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec40000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf.robot new file mode 100644 index 0000000000..8d8d548254 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf.robot @@ -0,0 +1,167 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | RECONF +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_400 +| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | 1_ADDED_TUNNEL | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | and sends back to TG. +| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ +| ... | with zero packet loss tolerance, then measures loss at this load\ +| ... | while additional tunnels are configured.\ +| ... | Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains one L3 flow-groups +| ... | (flow-group per direction, number of flows per flow-group equals to +| ... | number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${62} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${400} +| ${n_added_tunnels}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_256 config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA 256 128 +| | +| | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels} +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch +| | Start Traffic on Background | ${unidirectional_throughput} +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_tunnels} +| | ${result}= | Stop Running Traffic +| | Display Reconfig Test Message | ${result} + +*** Test Cases *** +| 64B-1c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf.robot new file mode 100644 index 0000000000..7b40d3e813 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf.robot @@ -0,0 +1,167 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | RECONF +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_400 +| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | 1_ADDED_TUNNEL | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | and sends back to TG. +| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ +| ... | with zero packet loss tolerance, then measures loss at this load\ +| ... | while additional tunnels are configured.\ +| ... | Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains one L3 flow-groups +| ... | (flow-group per direction, number of flows per flow-group equals to +| ... | number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${78} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${400} +| ${n_added_tunnels}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA 512 256 +| | +| | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels} +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch +| | Start Traffic on Background | ${unidirectional_throughput} +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_tunnels} +| | ${result}= | Stop Running Traffic +| | Display Reconfig Test Message | ${result} + +*** Test Cases *** +| 64B-1c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf.robot new file mode 100644 index 0000000000..0ed652b840 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf.robot @@ -0,0 +1,168 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | RECONF +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_400 +| ... | AES_128_GCM | AES | 1_ADDED_TUNNEL | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128gcm-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | and sends back to TG. +| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ +| ... | with zero packet loss tolerance, then measures loss at this load\ +| ... | while additional tunnels are configured.\ +| ... | Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains one L3 flow-groups +| ... | (flow-group per direction, number of flows per flow-group equals to +| ... | number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${400} +| ${n_added_tunnels}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES GCM 128 +| | ${auth_alg}= | Set Variable | ${NONE} +| | ${ipsec_proto} = | IPsec Proto ESP +| | +| | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels} +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch +| | Start Traffic on Background | ${unidirectional_throughput} +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_tunnels} +| | ${result}= | Stop Running Traffic +| | Display Reconfig Test Message | ${result} + +*** Test Cases *** +| 64B-1c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf.robot new file mode 100644 index 0000000000..dee4ecd2c6 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf.robot @@ -0,0 +1,168 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | RECONF +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_400 +| ... | AES_256_GCM | AES | 1_ADDED_TUNNEL | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec400tnlsw-1atnl-ip4base-int-aes256gcm-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | and sends back to TG. +| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ +| ... | with zero packet loss tolerance, then measures loss at this load\ +| ... | while additional tunnels are configured.\ +| ... | Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains one L3 flow-groups +| ... | (flow-group per direction, number of flows per flow-group equals to +| ... | number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${400} +| ${n_added_tunnels}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES GCM 256 +| | ${auth_alg}= | Set Variable | ${NONE} +| | ${ipsec_proto} = | IPsec Proto ESP +| | +| | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels} +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch +| | Start Traffic on Background | ${unidirectional_throughput} +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_tunnels} +| | ${result}= | Stop Running Traffic +| | Display Reconfig Test Message | ${result} + +*** Test Cases *** +| 64B-1c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec400tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec400tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr.robot new file mode 100644 index 0000000000..fc7db87bc5 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec400tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr.robot @@ -0,0 +1,159 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_400 +| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec400tnlsw-ip4base-int-aes128cbc-hmac256sha-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | and sends back to TG. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on links to DUTs. +| ... | TG traffic profile contains one L3 flow-groups (number of flows +| ... | per flow-group equals to number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${62} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${400} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_256 config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA 256 128 +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec400tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec400tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec400tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec400tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec400tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec400tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec400tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec400tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec400tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec400tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec400tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec400tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec400tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec400tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot new file mode 100644 index 0000000000..4e88ff8cfa --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec400tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot @@ -0,0 +1,159 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_400 +| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec400tnlsw-ip4base-int-aes128cbc-hmac512sha-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | and sends back to TG. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on links to DUTs. +| ... | TG traffic profile contains one L3 flow-groups (number of flows +| ... | per flow-group equals to number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${78} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${400} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA 512 256 +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec400tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec400tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec400tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec400tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec400tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec400tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec400tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec400tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec400tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec400tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec400tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec400tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec400tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec400tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot new file mode 100644 index 0000000000..12512a8c26 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec400tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot @@ -0,0 +1,160 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_400 +| ... | AES_128_GCM | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec400tnlsw-ip4base-int-aes128gcm-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | and sends back to TG. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on links to DUTs. +| ... | TG traffic profile contains one L3 flow-groups (number of flows +| ... | per flow-group equals to number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${400} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg} = | Crypto Alg AES GCM 128 +| | ${auth_alg} = | Set Variable | ${NONE} +| | ${ipsec_proto} = | IPsec Proto ESP +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec400tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec400tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec400tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec400tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec400tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec400tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec400tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec400tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec400tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec400tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec400tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec400tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec400tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec400tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot new file mode 100644 index 0000000000..5da49b42ee --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec400tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot @@ -0,0 +1,160 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_400 +| ... | AES_256_GCM | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec400tnlsw-ip4base-int-aes256gcm-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | and sends back to TG. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on links to DUTs. +| ... | TG traffic profile contains one L3 flow-groups (number of flows +| ... | per flow-group equals to number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${400} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg} = | Crypto Alg AES GCM 256 +| | ${auth_alg} = | Set Variable | ${NONE} +| | ${ipsec_proto} = | IPsec Proto ESP +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec400tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec400tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec400tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec400tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec400tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec400tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec400tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec400tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec400tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec400tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec400tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec400tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf.robot new file mode 100644 index 0000000000..f87e5e5048 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf.robot @@ -0,0 +1,167 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | RECONF +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_40 +| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | 1_ADDED_TUNNEL | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | and sends back to TG. +| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ +| ... | with zero packet loss tolerance, then measures loss at this load\ +| ... | while additional tunnels are configured.\ +| ... | Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains one L3 flow-groups +| ... | (flow-group per direction, number of flows per flow-group equals to +| ... | number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${62} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${40} +| ${n_added_tunnels}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_256 config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA 256 128 +| | +| | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels} +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch +| | Start Traffic on Background | ${unidirectional_throughput} +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_tunnels} +| | ${result}= | Stop Running Traffic +| | Display Reconfig Test Message | ${result} + +*** Test Cases *** +| 64B-1c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf.robot new file mode 100644 index 0000000000..a361ae74f0 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf.robot @@ -0,0 +1,167 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | RECONF +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_40 +| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | 1_ADDED_TUNNEL | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | and sends back to TG. +| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ +| ... | with zero packet loss tolerance, then measures loss at this load\ +| ... | while additional tunnels are configured.\ +| ... | Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains one L3 flow-groups +| ... | (flow-group per direction, number of flows per flow-group equals to +| ... | number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${78} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${40} +| ${n_added_tunnels}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA 512 256 +| | +| | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels} +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch +| | Start Traffic on Background | ${unidirectional_throughput} +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_tunnels} +| | ${result}= | Stop Running Traffic +| | Display Reconfig Test Message | ${result} + +*** Test Cases *** +| 64B-1c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf.robot new file mode 100644 index 0000000000..9b95f82473 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf.robot @@ -0,0 +1,168 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | RECONF +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_40 +| ... | AES_128_GCM | AES | 1_ADDED_TUNNEL | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128gcm-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | and sends back to TG. +| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ +| ... | with zero packet loss tolerance, then measures loss at this load\ +| ... | while additional tunnels are configured.\ +| ... | Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains one L3 flow-groups +| ... | (flow-group per direction, number of flows per flow-group equals to +| ... | number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${40} +| ${n_added_tunnels}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES GCM 128 +| | ${auth_alg}= | Set Variable | ${NONE} +| | ${ipsec_proto} = | IPsec Proto ESP +| | +| | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels} +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch +| | Start Traffic on Background | ${unidirectional_throughput} +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_tunnels} +| | ${result}= | Stop Running Traffic +| | Display Reconfig Test Message | ${result} + +*** Test Cases *** +| 64B-1c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf.robot new file mode 100644 index 0000000000..532982ec14 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf.robot @@ -0,0 +1,168 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | RECONF +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_40 +| ... | AES_256_GCM | AES | 1_ADDED_TUNNEL | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec40tnlsw-1atnl-ip4base-int-aes256gcm-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | and sends back to TG. +| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ +| ... | with zero packet loss tolerance, then measures loss at this load\ +| ... | while additional tunnels are configured.\ +| ... | Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains one L3 flow-groups +| ... | (flow-group per direction, number of flows per flow-group equals to +| ... | number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${40} +| ${n_added_tunnels}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES GCM 256 +| | ${auth_alg}= | Set Variable | ${NONE} +| | ${ipsec_proto} = | IPsec Proto ESP +| | +| | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels} +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch +| | Start Traffic on Background | ${unidirectional_throughput} +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_tunnels} +| | ${result}= | Stop Running Traffic +| | Display Reconfig Test Message | ${result} + +*** Test Cases *** +| 64B-1c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr.robot new file mode 100644 index 0000000000..981abacca5 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr.robot @@ -0,0 +1,159 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_40 +| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac256sha-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | and sends back to TG. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on links to DUTs. +| ... | TG traffic profile contains one L3 flow-groups (number of flows +| ... | per flow-group equals to number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${62} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${40} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_256 config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA 256 128 +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot new file mode 100644 index 0000000000..4e966bc4fe --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot @@ -0,0 +1,159 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_40 +| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac512sha-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | and sends back to TG. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on links to DUTs. +| ... | TG traffic profile contains one L3 flow-groups (number of flows +| ... | per flow-group equals to number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${78} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${40} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA 512 256 +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot new file mode 100644 index 0000000000..28584ac023 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot @@ -0,0 +1,160 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_40 +| ... | AES_128_GCM | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec40tnlsw-ip4base-int-aes128gcm-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | and sends back to TG. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on links to DUTs. +| ... | TG traffic profile contains one L3 flow-groups (number of flows +| ... | per flow-group equals to number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${40} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg} = | Crypto Alg AES GCM 128 +| | ${auth_alg} = | Set Variable | ${NONE} +| | ${ipsec_proto} = | IPsec Proto ESP +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec40tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec40tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec40tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec40tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec40tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec40tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec40tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec40tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec40tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec40tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec40tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec40tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot new file mode 100644 index 0000000000..60a180759a --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot @@ -0,0 +1,160 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_40 +| ... | AES_256_GCM | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec40tnlsw-ip4base-int-aes256gcm-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | and sends back to TG. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on links to DUTs. +| ... | TG traffic profile contains one L3 flow-groups (number of flows +| ... | per flow-group equals to number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${40} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg} = | Crypto Alg AES GCM 256 +| | ${auth_alg} = | Set Variable | ${NONE} +| | ${ipsec_proto} = | IPsec Proto ESP +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec40tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec40tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec40tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec40tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec40tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec40tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec40tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec40tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec40tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec40tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec40tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec40tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf.robot new file mode 100644 index 0000000000..5962f2b399 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf.robot @@ -0,0 +1,167 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | RECONF +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_4 +| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | 1_ADDED_TUNNEL | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | and sends back to TG. +| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ +| ... | with zero packet loss tolerance, then measures loss at this load\ +| ... | while additional tunnels are configured.\ +| ... | Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains one L3 flow-groups +| ... | (flow-group per direction, number of flows per flow-group equals to +| ... | number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${62} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${4} +| ${n_added_tunnels}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_256 config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA 256 128 +| | +| | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels} +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch +| | Start Traffic on Background | ${unidirectional_throughput} +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_tunnels} +| | ${result}= | Stop Running Traffic +| | Display Reconfig Test Message | ${result} + +*** Test Cases *** +| 64B-1c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf.robot new file mode 100644 index 0000000000..0fa3b0b373 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf.robot @@ -0,0 +1,167 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | RECONF +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_4 +| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | 1_ADDED_TUNNEL | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | and sends back to TG. +| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ +| ... | with zero packet loss tolerance, then measures loss at this load\ +| ... | while additional tunnels are configured.\ +| ... | Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains one L3 flow-groups +| ... | (flow-group per direction, number of flows per flow-group equals to +| ... | number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${78} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${4} +| ${n_added_tunnels}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA 512 256 +| | +| | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels} +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch +| | Start Traffic on Background | ${unidirectional_throughput} +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_tunnels} +| | ${result}= | Stop Running Traffic +| | Display Reconfig Test Message | ${result} + +*** Test Cases *** +| 64B-1c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf.robot new file mode 100644 index 0000000000..6f9399fe6f --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf.robot @@ -0,0 +1,168 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | RECONF +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_4 +| ... | AES_128_GCM | AES | 1_ADDED_TUNNEL | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128gcm-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | and sends back to TG. +| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ +| ... | with zero packet loss tolerance, then measures loss at this load\ +| ... | while additional tunnels are configured.\ +| ... | Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains one L3 flow-groups +| ... | (flow-group per direction, number of flows per flow-group equals to +| ... | number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${4} +| ${n_added_tunnels}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES GCM 128 +| | ${auth_alg}= | Set Variable | ${NONE} +| | ${ipsec_proto} = | IPsec Proto ESP +| | +| | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels} +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch +| | Start Traffic on Background | ${unidirectional_throughput} +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_tunnels} +| | ${result}= | Stop Running Traffic +| | Display Reconfig Test Message | ${result} + +*** Test Cases *** +| 64B-1c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf.robot new file mode 100644 index 0000000000..a7c746f67a --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf.robot @@ -0,0 +1,168 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | RECONF +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_4 +| ... | AES_256_GCM | AES | 1_ADDED_TUNNEL | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec4tnlsw-1atnl-ip4base-int-aes256gcm-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | and sends back to TG. +| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ +| ... | with zero packet loss tolerance, then measures loss at this load\ +| ... | while additional tunnels are configured.\ +| ... | Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains one L3 flow-groups +| ... | (flow-group per direction, number of flows per flow-group equals to +| ... | number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${4} +| ${n_added_tunnels}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES GCM 256 +| | ${auth_alg}= | Set Variable | ${NONE} +| | ${ipsec_proto} = | IPsec Proto ESP +| | +| | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels} +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch +| | Start Traffic on Background | ${unidirectional_throughput} +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_tunnels} +| | ${result}= | Stop Running Traffic +| | Display Reconfig Test Message | ${result} + +*** Test Cases *** +| 64B-1c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr.robot new file mode 100644 index 0000000000..7e6cfd8d6a --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr.robot @@ -0,0 +1,159 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_4 +| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac256sha-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | and sends back to TG. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on links to DUTs. +| ... | TG traffic profile contains one L3 flow-groups (number of flows +| ... | per flow-group equals to number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${62} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${4} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_256 config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA 256 128 +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot new file mode 100644 index 0000000000..52b8015cf2 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot @@ -0,0 +1,159 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_4 +| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac512sha-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | and sends back to TG. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on links to DUTs. +| ... | TG traffic profile contains one L3 flow-groups (number of flows +| ... | per flow-group equals to number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${78} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${4} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA 512 256 +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot new file mode 100644 index 0000000000..1edb3dac26 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot @@ -0,0 +1,160 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_4 +| ... | AES_128_GCM | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec4tnlsw-ip4base-int-aes128gcm-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | and sends back to TG. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on links to DUTs. +| ... | TG traffic profile contains one L3 flow-groups (number of flows +| ... | per flow-group equals to number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${4} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg} = | Crypto Alg AES GCM 128 +| | ${auth_alg} = | Set Variable | ${NONE} +| | ${ipsec_proto} = | IPsec Proto ESP +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec4tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec4tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec4tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec4tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec4tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec4tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec4tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec4tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec4tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec4tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec4tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec4tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot new file mode 100644 index 0000000000..f51169dc20 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot @@ -0,0 +1,160 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_4 +| ... | AES_256_GCM | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec4tnlsw-ip4base-int-aes256gcm-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | and sends back to TG. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on links to DUTs. +| ... | TG traffic profile contains one L3 flow-groups (number of flows +| ... | per flow-group equals to number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${4} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg} = | Crypto Alg AES GCM 256 +| | ${auth_alg} = | Set Variable | ${NONE} +| | ${ipsec_proto} = | IPsec Proto ESP +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec4tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec4tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec4tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec4tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec4tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec4tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec4tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec4tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec4tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec4tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec4tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec4tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr.robot new file mode 100644 index 0000000000..7fc6ec7d8e --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr.robot @@ -0,0 +1,166 @@ +# Copyright (c) 2021 Intel and/or its affiliates. +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | ASYNC | IPSECINT | NIC_Intel-X710 | SCALE +| ... | SCHEDULER | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0| TNL_4 +| ... | ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128cbc-hmac256sha-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG, run with IPsec async mode and use crypto +| ... | sw scheduler engine to schedule crypto work to crypto cores. DUT gets +| ... | IPv4 traffic from TG, encrypts it and sends back to TG. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on links to DUTs. +| ... | TG traffic profile contains one L3 flow-groups (number of flows +| ... | per flow-group equals to number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_sw_scheduler_plugin.so +| ... | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${62} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${4} +| ${dp_cores}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_256 config.\ +| | ... | Each DUT uses one physical core for data plane workers +| | ... | and rest of ${phy_cores} physical core(s) for crypto workers. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Total number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${1}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${1} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA 256 128 +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Enable IPSec Async Mode on all VPP DUTs +| | And Disable Crypto Work of VPP Worker Threads on all VPP DUTs | ${dp_cores} +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-2c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-3c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 64B | 3C +| | frame_size=${64} | phy_cores=${3} + +| 64B-4c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-2c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-3c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 1518B | 3C +| | frame_size=${1518} | phy_cores=${3} + +| 1518B-4c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-2c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-3c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 9000B | 3C +| | frame_size=${9000} | phy_cores=${3} + +| 9000B-4c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-2c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-3c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | IMIX | 3C +| | frame_size=IMIX_v4_1 | phy_cores=${3} + +| IMIX-4c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot new file mode 100644 index 0000000000..a61adea61f --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot @@ -0,0 +1,166 @@ +# Copyright (c) 2021 Intel and/or its affiliates. +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | ASYNC | IPSECINT | NIC_Intel-X710 | SCALE +| ... | SCHEDULER | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 | TNL_4 +| ... | ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG, run with IPsec async mode and use crypto +| ... | sw scheduler engine to schedule crypto work to crypto cores. DUT gets +| ... | IPv4 traffic from TG, encrypts it and sends back to TG. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on links to DUTs. +| ... | TG traffic profile contains one L3 flow-groups (number of flows +| ... | per flow-group equals to number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_sw_scheduler_plugin.so +| ... | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${78} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${4} +| ${dp_cores}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\ +| | ... | Each DUT uses one physical core for data plane workers +| | ... | and rest of ${phy_cores} physical core(s) for crypto workers. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Total number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${1}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${1} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA 512 256 +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Enable IPSec Async Mode on all VPP DUTs +| | And Disable Crypto Work of VPP Worker Threads on all VPP DUTs | ${dp_cores} +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-2c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-3c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 64B | 3C +| | frame_size=${64} | phy_cores=${3} + +| 64B-4c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-2c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-3c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 1518B | 3C +| | frame_size=${1518} | phy_cores=${3} + +| 1518B-4c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-2c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-3c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 9000B | 3C +| | frame_size=${9000} | phy_cores=${3} + +| 9000B-4c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-2c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-3c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | IMIX | 3C +| | frame_size=IMIX_v4_1 | phy_cores=${3} + +| IMIX-4c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr.robot new file mode 100644 index 0000000000..3dcc7586c0 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr.robot @@ -0,0 +1,166 @@ +# Copyright (c) 2021 Intel and/or its affiliates. +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | ASYNC | IPSECINT | NIC_Intel-X710 | SCALE +| ... | SCHEDULER | AES_128_GCM | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 | TNL_4 +| ... | ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128gcm-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG, run with IPsec async mode and use crypto +| ... | sw scheduler engine to schedule crypto work to crypto cores. DUT gets +| ... | IPv4 traffic from TG, encrypts it and sends back to TG. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on links to DUTs. +| ... | TG traffic profile contains one L3 flow-groups (number of flows +| ... | per flow-group equals to number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_sw_scheduler_plugin.so +| ... | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${4} +| ${dp_cores}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\ +| | ... | Each DUT uses one physical core for data plane workers +| | ... | and rest of ${phy_cores} physical core(s) for crypto workers. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Total number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${1}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${1} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES GCM 128 +| | ${auth_alg}= | Set Variable | ${NONE} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Enable IPSec Async Mode on all VPP DUTs +| | And Disable Crypto Work of VPP Worker Threads on all VPP DUTs | ${dp_cores} +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-2c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-3c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 64B | 3C +| | frame_size=${64} | phy_cores=${3} + +| 64B-4c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-2c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-3c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 1518B | 3C +| | frame_size=${1518} | phy_cores=${3} + +| 1518B-4c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-2c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-3c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 9000B | 3C +| | frame_size=${9000} | phy_cores=${3} + +| 9000B-4c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-2c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-3c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | IMIX | 3C +| | frame_size=IMIX_v4_1 | phy_cores=${3} + +| IMIX-4c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr.robot new file mode 100644 index 0000000000..bbff17e366 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr.robot @@ -0,0 +1,166 @@ +# Copyright (c) 2021 Intel and/or its affiliates. +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | ASYNC | IPSECINT | NIC_Intel-X710 | SCALE +| ... | SCHEDULER | AES_256_GCM | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 | TNL_4 +| ... | ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes256gcm-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG, run with IPsec async mode and use crypto +| ... | sw scheduler engine to schedule crypto work to crypto cores. DUT gets +| ... | IPv4 traffic from TG, encrypts it and sends back to TG. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on links to DUTs. +| ... | TG traffic profile contains one L3 flow-groups (number of flows +| ... | per flow-group equals to number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_sw_scheduler_plugin.so +| ... | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${4} +| ${dp_cores}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ +| | ... | Each DUT uses one physical core for data plane workers +| | ... | and rest of ${phy_cores} physical core(s) for crypto workers. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Total number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${1}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${1} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES GCM 256 +| | ${auth_alg}= | Set Variable | ${NONE} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Enable IPSec Async Mode on all VPP DUTs +| | And Disable Crypto Work of VPP Worker Threads on all VPP DUTs | ${dp_cores} +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-2c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-3c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 64B | 3C +| | frame_size=${64} | phy_cores=${3} + +| 64B-4c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-2c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-3c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 1518B | 3C +| | frame_size=${1518} | phy_cores=${3} + +| 1518B-4c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-2c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-3c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 9000B | 3C +| | frame_size=${9000} | phy_cores=${3} + +| 9000B-4c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-2c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-3c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | IMIX | 3C +| | frame_size=IMIX_v4_1 | phy_cores=${3} + +| IMIX-4c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf.robot new file mode 100644 index 0000000000..4724c7348c --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf.robot @@ -0,0 +1,167 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | RECONF +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_5000 +| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | 1_ADDED_TUNNEL | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | and sends back to TG. +| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ +| ... | with zero packet loss tolerance, then measures loss at this load\ +| ... | while additional tunnels are configured.\ +| ... | Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains one L3 flow-groups +| ... | (flow-group per direction, number of flows per flow-group equals to +| ... | number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${62} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${5000} +| ${n_added_tunnels}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_256 config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA 256 128 +| | +| | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels} +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch +| | Start Traffic on Background | ${unidirectional_throughput} +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_tunnels} +| | ${result}= | Stop Running Traffic +| | Display Reconfig Test Message | ${result} + +*** Test Cases *** +| 64B-1c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf.robot new file mode 100644 index 0000000000..1ec2f4bc81 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf.robot @@ -0,0 +1,167 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | RECONF +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_5000 +| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | 1_ADDED_TUNNEL | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | and sends back to TG. +| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ +| ... | with zero packet loss tolerance, then measures loss at this load\ +| ... | while additional tunnels are configured.\ +| ... | Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains one L3 flow-groups +| ... | (flow-group per direction, number of flows per flow-group equals to +| ... | number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${78} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${5000} +| ${n_added_tunnels}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA 512 256 +| | +| | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels} +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch +| | Start Traffic on Background | ${unidirectional_throughput} +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_tunnels} +| | ${result}= | Stop Running Traffic +| | Display Reconfig Test Message | ${result} + +*** Test Cases *** +| 64B-1c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf.robot new file mode 100644 index 0000000000..0db764b4bb --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf.robot @@ -0,0 +1,168 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | RECONF +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_5000 +| ... | AES_128_GCM | AES | 1_ADDED_TUNNEL | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128gcm-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | and sends back to TG. +| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ +| ... | with zero packet loss tolerance, then measures loss at this load\ +| ... | while additional tunnels are configured.\ +| ... | Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains one L3 flow-groups +| ... | (flow-group per direction, number of flows per flow-group equals to +| ... | number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${5000} +| ${n_added_tunnels}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES GCM 128 +| | ${auth_alg}= | Set Variable | ${NONE} +| | ${ipsec_proto} = | IPsec Proto ESP +| | +| | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels} +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch +| | Start Traffic on Background | ${unidirectional_throughput} +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_tunnels} +| | ${result}= | Stop Running Traffic +| | Display Reconfig Test Message | ${result} + +*** Test Cases *** +| 64B-1c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf.robot new file mode 100644 index 0000000000..89d4268dc3 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf.robot @@ -0,0 +1,168 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | RECONF +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_5000 +| ... | AES_256_GCM | AES | 1_ADDED_TUNNEL | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes256gcm-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | and sends back to TG. +| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ +| ... | with zero packet loss tolerance, then measures loss at this load\ +| ... | while additional tunnels are configured.\ +| ... | Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains one L3 flow-groups +| ... | (flow-group per direction, number of flows per flow-group equals to +| ... | number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${5000} +| ${n_added_tunnels}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES GCM 256 +| | ${auth_alg}= | Set Variable | ${NONE} +| | ${ipsec_proto} = | IPsec Proto ESP +| | +| | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels} +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch +| | Start Traffic on Background | ${unidirectional_throughput} +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_tunnels} +| | ${result}= | Stop Running Traffic +| | Display Reconfig Test Message | ${result} + +*** Test Cases *** +| 64B-1c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec5000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec5000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr.robot new file mode 100644 index 0000000000..232240e017 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec5000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr.robot @@ -0,0 +1,159 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_5000 +| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec5000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | and sends back to TG. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on links to DUTs. +| ... | TG traffic profile contains one L3 flow-groups (number of flows +| ... | per flow-group equals to number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${62} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${5000} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_256 config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA 256 128 +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec5000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec5000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec5000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec5000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec5000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec5000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec5000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec5000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec5000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec5000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec5000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec5000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec5000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec5000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot new file mode 100644 index 0000000000..a4ce0ab476 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec5000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot @@ -0,0 +1,159 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_5000 +| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec5000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | and sends back to TG. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on links to DUTs. +| ... | TG traffic profile contains one L3 flow-groups (number of flows +| ... | per flow-group equals to number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${78} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${5000} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA 512 256 +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec5000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec5000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec5000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec5000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec5000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec5000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec5000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec5000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec5000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec5000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec5000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec5000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec5000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec5000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot new file mode 100644 index 0000000000..904fc815a2 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec5000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot @@ -0,0 +1,160 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_5000 +| ... | AES_128_GCM | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec5000tnlsw-ip4base-int-aes128gcm-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | and sends back to TG. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on links to DUTs. +| ... | TG traffic profile contains one L3 flow-groups (number of flows +| ... | per flow-group equals to number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${5000} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg} = | Crypto Alg AES GCM 128 +| | ${auth_alg} = | Set Variable | ${NONE} +| | ${ipsec_proto} = | IPsec Proto ESP +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec5000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec5000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec5000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec5000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec5000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec5000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec5000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec5000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec5000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec5000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec5000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec5000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec5000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec5000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot new file mode 100644 index 0000000000..3bd57616cf --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec5000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot @@ -0,0 +1,160 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_5000 +| ... | AES_256_GCM | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec5000tnlsw-ip4base-int-aes256gcm-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | and sends back to TG. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on links to DUTs. +| ... | TG traffic profile contains one L3 flow-groups (number of flows +| ... | per flow-group equals to number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${5000} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg} = | Crypto Alg AES GCM 256 +| | ${auth_alg} = | Set Variable | ${NONE} +| | ${ipsec_proto} = | IPsec Proto ESP +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec5000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec5000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec5000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec5000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec5000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec5000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec5000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec5000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec5000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec5000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec5000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec5000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf.robot new file mode 100644 index 0000000000..247e98060b --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf.robot @@ -0,0 +1,167 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | RECONF +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_60000 +| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | 1_ADDED_TUNNEL | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | and sends back to TG. +| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ +| ... | with zero packet loss tolerance, then measures loss at this load\ +| ... | while additional tunnels are configured.\ +| ... | Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains one L3 flow-groups +| ... | (flow-group per direction, number of flows per flow-group equals to +| ... | number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${62} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${60000} +| ${n_added_tunnels}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_256 config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA 256 128 +| | +| | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels} +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch +| | Start Traffic on Background | ${unidirectional_throughput} +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_tunnels} +| | ${result}= | Stop Running Traffic +| | Display Reconfig Test Message | ${result} + +*** Test Cases *** +| 64B-1c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-udir-reconf +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf.robot new file mode 100644 index 0000000000..1a85029f6e --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf.robot @@ -0,0 +1,167 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | RECONF +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_60000 +| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | 1_ADDED_TUNNEL | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | and sends back to TG. +| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ +| ... | with zero packet loss tolerance, then measures loss at this load\ +| ... | while additional tunnels are configured.\ +| ... | Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains one L3 flow-groups +| ... | (flow-group per direction, number of flows per flow-group equals to +| ... | number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${78} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${60000} +| ${n_added_tunnels}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA 512 256 +| | +| | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels} +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch +| | Start Traffic on Background | ${unidirectional_throughput} +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_tunnels} +| | ${result}= | Stop Running Traffic +| | Display Reconfig Test Message | ${result} + +*** Test Cases *** +| 64B-1c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf.robot new file mode 100644 index 0000000000..9726460c84 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf.robot @@ -0,0 +1,168 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | RECONF +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_60000 +| ... | AES_128_GCM | AES | 1_ADDED_TUNNEL | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128gcm-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | and sends back to TG. +| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ +| ... | with zero packet loss tolerance, then measures loss at this load\ +| ... | while additional tunnels are configured.\ +| ... | Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains one L3 flow-groups +| ... | (flow-group per direction, number of flows per flow-group equals to +| ... | number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${60000} +| ${n_added_tunnels}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES GCM 128 +| | ${auth_alg}= | Set Variable | ${NONE} +| | ${ipsec_proto} = | IPsec Proto ESP +| | +| | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels} +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch +| | Start Traffic on Background | ${unidirectional_throughput} +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_tunnels} +| | ${result}= | Stop Running Traffic +| | Display Reconfig Test Message | ${result} + +*** Test Cases *** +| 64B-1c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf.robot new file mode 100644 index 0000000000..de82276688 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf.robot @@ -0,0 +1,168 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | RECONF +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_60000 +| ... | AES_256_GCM | AES | 1_ADDED_TUNNEL | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes256gcm-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | and sends back to TG. +| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ +| ... | with zero packet loss tolerance, then measures loss at this load\ +| ... | while additional tunnels are configured.\ +| ... | Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains one L3 flow-groups +| ... | (flow-group per direction, number of flows per flow-group equals to +| ... | number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${60000} +| ${n_added_tunnels}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES GCM 256 +| | ${auth_alg}= | Set Variable | ${NONE} +| | ${ipsec_proto} = | IPsec Proto ESP +| | +| | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels} +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch +| | Start Traffic on Background | ${unidirectional_throughput} +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_tunnels} +| | ${result}= | Stop Running Traffic +| | Display Reconfig Test Message | ${result} + +*** Test Cases *** +| 64B-1c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec60000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec60000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr.robot new file mode 100644 index 0000000000..3b9ee45a33 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec60000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr.robot @@ -0,0 +1,159 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_60000 +| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec60000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | and sends back to TG. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on links to DUTs. +| ... | TG traffic profile contains one L3 flow-groups (number of flows +| ... | per flow-group equals to number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${62} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${60000} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_256 config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA 256 128 +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec60000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec60000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec60000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec60000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec60000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec60000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec60000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec60000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec60000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec60000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec60000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec60000tnlsw-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec60000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec60000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot new file mode 100644 index 0000000000..98a717fe1b --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec60000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot @@ -0,0 +1,159 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_60000 +| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec60000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | and sends back to TG. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on links to DUTs. +| ... | TG traffic profile contains one L3 flow-groups (number of flows +| ... | per flow-group equals to number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${78} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${60000} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA 512 256 +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec60000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec60000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec60000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec60000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec60000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec60000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec60000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec60000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec60000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec60000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec60000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec60000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec60000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec60000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot new file mode 100644 index 0000000000..7dadcb629c --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec60000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot @@ -0,0 +1,160 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_60000 +| ... | AES_128_GCM | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec60000tnlsw-ip4base-int-aes128gcm-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | and sends back to TG. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on links to DUTs. +| ... | TG traffic profile contains one L3 flow-groups (number of flows +| ... | per flow-group equals to number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${60000} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg} = | Crypto Alg AES GCM 128 +| | ${auth_alg} = | Set Variable | ${NONE} +| | ${ipsec_proto} = | IPsec Proto ESP +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec60000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec60000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec60000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec60000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec60000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec60000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec60000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec60000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec60000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec60000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec60000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec60000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec60000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec60000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot new file mode 100644 index 0000000000..3d82f5f433 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec60000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot @@ -0,0 +1,160 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_60000 +| ... | AES_256_GCM | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec60000tnlsw-ip4base-int-aes256gcm-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | and sends back to TG. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on links to DUTs. +| ... | TG traffic profile contains one L3 flow-groups (number of flows +| ... | per flow-group equals to number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${60000} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg} = | Crypto Alg AES GCM 256 +| | ${auth_alg} = | Set Variable | ${NONE} +| | ${ipsec_proto} = | IPsec Proto ESP +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec60000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec60000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec60000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec60000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec60000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec60000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec60000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec60000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec60000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec60000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec60000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec60000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr.robot new file mode 100644 index 0000000000..796a53f9fb --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr.robot @@ -0,0 +1,166 @@ +# Copyright (c) 2021 Intel and/or its affiliates. +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | ASYNC | IPSECINT | NIC_Intel-X710 | SCALE +| ... | SCHEDULER | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0| TNL_8 +| ... | ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128cbc-hmac256sha-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG, run with IPsec async mode and use crypto +| ... | sw scheduler engine to schedule crypto work to crypto cores. DUT gets +| ... | IPv4 traffic from TG, encrypts it and sends back to TG. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on links to DUTs. +| ... | TG traffic profile contains one L3 flow-groups (number of flows +| ... | per flow-group equals to number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_sw_scheduler_plugin.so +| ... | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${62} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${8} +| ${dp_cores}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_256 config.\ +| | ... | Each DUT uses one physical core for data plane workers +| | ... | and rest of ${phy_cores} physical core(s) for crypto workers. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Total number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${1}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${1} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA 256 128 +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Enable IPSec Async Mode on all VPP DUTs +| | And Disable Crypto Work of VPP Worker Threads on all VPP DUTs | ${dp_cores} +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-2c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-3c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 64B | 3C +| | frame_size=${64} | phy_cores=${3} + +| 64B-4c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-2c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-3c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 1518B | 3C +| | frame_size=${1518} | phy_cores=${3} + +| 1518B-4c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-2c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-3c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 9000B | 3C +| | frame_size=${9000} | phy_cores=${3} + +| 9000B-4c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-2c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-3c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | IMIX | 3C +| | frame_size=IMIX_v4_1 | phy_cores=${3} + +| IMIX-4c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128cbc-hmac256sha-udir-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot new file mode 100644 index 0000000000..01df734adc --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot @@ -0,0 +1,166 @@ +# Copyright (c) 2021 Intel and/or its affiliates. +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | ASYNC | IPSECINT | NIC_Intel-X710 | SCALE +| ... | SCHEDULER | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 | TNL_8 +| ... | ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG, run with IPsec async mode and use crypto +| ... | sw scheduler engine to schedule crypto work to crypto cores. DUT gets +| ... | IPv4 traffic from TG, encrypts it and sends back to TG. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on links to DUTs. +| ... | TG traffic profile contains one L3 flow-groups (number of flows +| ... | per flow-group equals to number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_sw_scheduler_plugin.so +| ... | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${78} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${8} +| ${dp_cores}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\ +| | ... | Each DUT uses one physical core for data plane workers +| | ... | and rest of ${phy_cores} physical core(s) for crypto workers. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Total number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${1}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${1} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA 512 256 +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Enable IPSec Async Mode on all VPP DUTs +| | And Disable Crypto Work of VPP Worker Threads on all VPP DUTs | ${dp_cores} +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-2c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-3c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 64B | 3C +| | frame_size=${64} | phy_cores=${3} + +| 64B-4c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-2c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-3c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 1518B | 3C +| | frame_size=${1518} | phy_cores=${3} + +| 1518B-4c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-2c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-3c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 9000B | 3C +| | frame_size=${9000} | phy_cores=${3} + +| 9000B-4c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-2c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-3c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | IMIX | 3C +| | frame_size=IMIX_v4_1 | phy_cores=${3} + +| IMIX-4c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr.robot new file mode 100644 index 0000000000..ad0c1b87bf --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr.robot @@ -0,0 +1,166 @@ +# Copyright (c) 2021 Intel and/or its affiliates. +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | ASYNC | IPSECINT | NIC_Intel-X710 | SCALE +| ... | SCHEDULER | AES_128_GCM | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 | TNL_8 +| ... | ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128gcm-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG, run with IPsec async mode and use crypto +| ... | sw scheduler engine to schedule crypto work to crypto cores. DUT gets +| ... | IPv4 traffic from TG, encrypts it and sends back to TG. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on links to DUTs. +| ... | TG traffic profile contains one L3 flow-groups (number of flows +| ... | per flow-group equals to number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_sw_scheduler_plugin.so +| ... | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${8} +| ${dp_cores}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\ +| | ... | Each DUT uses one physical core for data plane workers +| | ... | and rest of ${phy_cores} physical core(s) for crypto workers. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Total number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${1}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${1} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES GCM 128 +| | ${auth_alg}= | Set Variable | ${NONE} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Enable IPSec Async Mode on all VPP DUTs +| | And Disable Crypto Work of VPP Worker Threads on all VPP DUTs | ${dp_cores} +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-2c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-3c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 64B | 3C +| | frame_size=${64} | phy_cores=${3} + +| 64B-4c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-2c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-3c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 1518B | 3C +| | frame_size=${1518} | phy_cores=${3} + +| 1518B-4c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-2c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-3c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 9000B | 3C +| | frame_size=${9000} | phy_cores=${3} + +| 9000B-4c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-2c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-3c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | IMIX | 3C +| | frame_size=IMIX_v4_1 | phy_cores=${3} + +| IMIX-4c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr.robot new file mode 100644 index 0000000000..799292166c --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr.robot @@ -0,0 +1,166 @@ +# Copyright (c) 2021 Intel and/or its affiliates. +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | ASYNC | IPSECINT | NIC_Intel-X710 | SCALE +| ... | SCHEDULER | AES_256_GCM | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 | TNL_8 +| ... | ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes256gcm-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG, run with IPsec async mode and use crypto +| ... | sw scheduler engine to schedule crypto work to crypto cores. DUT gets +| ... | IPv4 traffic from TG, encrypts it and sends back to TG. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on links to DUTs. +| ... | TG traffic profile contains one L3 flow-groups (number of flows +| ... | per flow-group equals to number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_sw_scheduler_plugin.so +| ... | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${8} +| ${dp_cores}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ +| | ... | Each DUT uses one physical core for data plane workers +| | ... | and rest of ${phy_cores} physical core(s) for crypto workers. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Total number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${1}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${1} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES GCM 256 +| | ${auth_alg}= | Set Variable | ${NONE} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Enable IPSec Async Mode on all VPP DUTs +| | And Disable Crypto Work of VPP Worker Threads on all VPP DUTs | ${dp_cores} +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-2c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-3c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 64B | 3C +| | frame_size=${64} | phy_cores=${3} + +| 64B-4c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-2c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-3c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 1518B | 3C +| | frame_size=${1518} | phy_cores=${3} + +| 1518B-4c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-2c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-3c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 9000B | 3C +| | frame_size=${9000} | phy_cores=${3} + +| 9000B-4c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-2c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-3c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | IMIX | 3C +| | frame_size=IMIX_v4_1 | phy_cores=${3} + +| IMIX-4c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} |