diff options
Diffstat (limited to 'tests/vpp')
20 files changed, 3018 insertions, 0 deletions
diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot new file mode 100644 index 0000000000..f2f29037c6 --- /dev/null +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot @@ -0,0 +1,151 @@ +# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2020 Intel and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1000 +| ... | IP4FWD | IPSEC | IPSECHW | ASYNC | IPSECINT | NIC_Intel-X710 | SCALE +| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec1000tnlhwasync-ip4base-int-aes128cbc-hmac256sha +| +| Suite Setup | Setup suite topology interfaces | performance | ipsechw +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, +| ... | Eth-IPv4-IPSec on DUT1-DUT2 +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple +| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it +| ... | and send to another DUT, where packets are decrypted and sent back to TG +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, number of flows per flow-group equals to +| ... | number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to both streams. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | HW_DH895xcc +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${62} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${dut1_if2_ip4}= | 100.0.0.1 +| ${dut2_if1_ip4}= | 200.0.0.2 +| ${dut2_if2_ip4}= | 192.168.20.1 +| ${tg_if2_ip4}= | 192.168.20.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${1000} +# Traffic profile: +| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_256 config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA 256 128 +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Enable IPSec Async Mode on all VPP DUTs +| | And Initialize IPSec in 3-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] +| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec1000tnlhwasync-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec1000tnlhwasync-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec1000tnlhwasync-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec1000tnlhwasync-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec1000tnlhwasync-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec1000tnlhwasync-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec1000tnlhwasync-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec1000tnlhwasync-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec1000tnlhwasync-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot new file mode 100644 index 0000000000..66eb21c139 --- /dev/null +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot @@ -0,0 +1,151 @@ +# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2020 Intel and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1000 +| ... | IP4FWD | IPSEC | IPSECHW | ASYNC | IPSECINT | NIC_Intel-X710 | SCALE +| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec1000tnlhwasync-ip4base-int-aes128cbc-hmac512sha +| +| Suite Setup | Setup suite topology interfaces | performance | ipsechw +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, +| ... | Eth-IPv4-IPSec on DUT1-DUT2 +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple +| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it +| ... | and send to another DUT, where packets are decrypted and sent back to TG +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, number of flows per flow-group equals to +| ... | number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to both streams. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | HW_DH895xcc +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${78} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${dut1_if2_ip4}= | 100.0.0.1 +| ${dut2_if1_ip4}= | 200.0.0.2 +| ${dut2_if2_ip4}= | 192.168.20.1 +| ${tg_if2_ip4}= | 192.168.20.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${1000} +# Traffic profile: +| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA 512 256 +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Enable IPSec Async Mode on all VPP DUTs +| | And Initialize IPSec in 3-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] +| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec1000tnlhwasync-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec1000tnlhwasync-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec1000tnlhwasync-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec1000tnlhwasync-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec1000tnlhwasync-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec1000tnlhwasync-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec1000tnlhwasync-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec1000tnlhwasync-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec1000tnlhwasync-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-int-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-int-aes128gcm-ndrpdr.robot new file mode 100644 index 0000000000..eb587d4984 --- /dev/null +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-int-aes128gcm-ndrpdr.robot @@ -0,0 +1,151 @@ +# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2020 Intel and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | SCALE | NDRPDR +| ... | IP4FWD | IPSEC | IPSECHW | ASYNC | IPSECINT | NIC_Intel-X710 | TNL_1000 +| ... | AES_128_GCM | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec1000tnlhwasync-ip4base-int-aes128gcm +| +| Suite Setup | Setup suite topology interfaces | performance | ipsechw +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, +| ... | Eth-IPv4-IPSec on DUT1-DUT2 +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple +| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it +| ... | and send to another DUT, where packets are decrypted and sent back to TG +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, number of flows per flow-group equals to +| ... | number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to both streams. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | HW_DH895xcc +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${dut1_if2_ip4}= | 100.0.0.1 +| ${dut2_if1_ip4}= | 200.0.0.2 +| ${dut2_if2_ip4}= | 192.168.20.1 +| ${tg_if2_ip4}= | 192.168.20.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${1000} +# Traffic profile: +| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES GCM 128 +| | ${auth_alg}= | Set Variable | ${NONE} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Enable IPSec Async Mode on all VPP DUTs +| | And Initialize IPSec in 3-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] +| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec1000tnlhwasync-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec1000tnlhwasync-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec1000tnlhwasync-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec1000tnlhwasync-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec1000tnlhwasync-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec1000tnlhwasync-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec1000tnlhwasync-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec1000tnlhwasync-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec1000tnlhwasync-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-int-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-int-aes256gcm-ndrpdr.robot new file mode 100644 index 0000000000..2e00e6d053 --- /dev/null +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-int-aes256gcm-ndrpdr.robot @@ -0,0 +1,151 @@ +# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2020 Intel and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | SCALE | NDRPDR +| ... | IP4FWD | IPSEC | IPSECHW | ASYNC | IPSECINT | NIC_Intel-X710 | TNL_1000 +| ... | AES_256_GCM | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec1000tnlhwasync-ip4base-int-aes256gcm +| +| Suite Setup | Setup suite topology interfaces | performance | ipsechw +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, +| ... | Eth-IPv4-IPSec on DUT1-DUT2 +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple +| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it +| ... | and send to another DUT, where packets are decrypted and sent back to TG +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, number of flows per flow-group equals to +| ... | number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to both streams. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | HW_DH895xcc +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${dut1_if2_ip4}= | 100.0.0.1 +| ${dut2_if1_ip4}= | 200.0.0.2 +| ${dut2_if2_ip4}= | 192.168.20.1 +| ${tg_if2_ip4}= | 192.168.20.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${1000} +# Traffic profile: +| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES GCM 256 +| | ${auth_alg}= | Set Variable | ${NONE} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Enable IPSec Async Mode on all VPP DUTs +| | And Initialize IPSec in 3-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] +| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec1000tnlhwasync-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec1000tnlhwasync-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec1000tnlhwasync-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec1000tnlhwasync-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec1000tnlhwasync-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec1000tnlhwasync-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec1000tnlhwasync-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec1000tnlhwasync-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec1000tnlhwasync-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128cbc-hmac256sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128cbc-hmac256sha-ndrpdr.robot new file mode 100644 index 0000000000..a784544ea2 --- /dev/null +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128cbc-hmac256sha-ndrpdr.robot @@ -0,0 +1,151 @@ +# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2020 Intel and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | SCALE | NDRPDR +| ... | IP4FWD | IPSEC | IPSECHW | ASYNC | IPSECTUN | NIC_Intel-X710 | TNL_1000 +| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec1000tnlhwasync-ip4base-policy-aes128cbc-hmac256sha +| +| Suite Setup | Setup suite topology interfaces | performance | ipsechw +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance +| +| Test Template | Local Template +| +| Documentation | *IPv4 IPsec tunnel mode performance test suite.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, +| ... | Eth-IPv4-IPSec on DUT1-DUT2 +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple +| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it +| ... | and send to another DUT, where packets are decrypted and sent back to TG +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, number of flows per flow-group equals to +| ... | number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to both streams. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | HW_DH895xcc +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${62} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${dut1_if2_ip4}= | 100.0.0.1 +| ${dut2_if1_ip4}= | 100.0.0.2 +| ${dut2_if2_ip4}= | 192.168.20.1 +| ${tg_if2_ip4}= | 192.168.20.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${1000} +# Traffic profile: +| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUTs runs IPsec tunneling AES_128_CBC / HMAC_SHA_256 config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA 256 128 +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Enable IPSec Async Mode on all VPP DUTs +| | And Initialize IPSec in 3-node circular topology +| | And VPP IPsec Add Multiple Tunnels +| | ... | ${nodes} | ${DUT1_${int}2}[0] | ${DUT2_${int}1}[0] | ${n_tunnels} +| | ... | ${encr_alg} | ${auth_alg} | ${dut1_if2_ip4} | ${dut2_if1_ip4} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128cbc-hmac256sha-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128cbc-hmac256sha-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128cbc-hmac256sha-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128cbc-hmac256sha-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128cbc-hmac256sha-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128cbc-hmac256sha-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128cbc-hmac256sha-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128cbc-hmac256sha-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128cbc-hmac256sha-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128cbc-hmac512sha-ndrpdr.robot new file mode 100644 index 0000000000..ac659ebd19 --- /dev/null +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128cbc-hmac512sha-ndrpdr.robot @@ -0,0 +1,151 @@ +# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2020 Intel and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | SCALE | NDRPDR +| ... | IP4FWD | IPSEC | IPSECHW | ASYNC | IPSECTUN | NIC_Intel-X710 | TNL_1000 +| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec1000tnlhwasync-ip4base-policy-aes128cbc-hmac512sha +| +| Suite Setup | Setup suite topology interfaces | performance | ipsechw +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance +| +| Test Template | Local Template +| +| Documentation | *IPv4 IPsec tunnel mode performance test suite.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, +| ... | Eth-IPv4-IPSec on DUT1-DUT2 +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple +| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it +| ... | and send to another DUT, where packets are decrypted and sent back to TG +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, number of flows per flow-group equals to +| ... | number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to both streams. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | HW_DH895xcc +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${78} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${dut1_if2_ip4}= | 100.0.0.1 +| ${dut2_if1_ip4}= | 100.0.0.2 +| ${dut2_if2_ip4}= | 192.168.20.1 +| ${tg_if2_ip4}= | 192.168.20.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${1000} +# Traffic profile: +| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUTs runs IPsec tunneling AES_128_CBC / HMAC_SHA_512 config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA 512 256 +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Enable IPSec Async Mode on all VPP DUTs +| | And Initialize IPSec in 3-node circular topology +| | And VPP IPsec Add Multiple Tunnels +| | ... | ${nodes} | ${DUT1_${int}2}[0] | ${DUT2_${int}1}[0] | ${n_tunnels} +| | ... | ${encr_alg} | ${auth_alg} | ${dut1_if2_ip4} | ${dut2_if1_ip4} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128gcm-ndrpdr.robot new file mode 100644 index 0000000000..877875dc3d --- /dev/null +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128gcm-ndrpdr.robot @@ -0,0 +1,151 @@ +# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2020 Intel and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | SCALE | NDRPDR +| ... | IP4FWD | IPSEC | IPSECHW | ASYNC | IPSECTUN | NIC_Intel-X710 | TNL_1000 +| ... | AES_128_GCM | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec1000tnlhwasync-ip4base-policy-aes128gcm +| +| Suite Setup | Setup suite topology interfaces | performance | ipsechw +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance +| +| Test Template | Local Template +| +| Documentation | *IPv4 IPsec tunnel mode performance test suite.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, +| ... | Eth-IPv4-IPSec on DUT1-DUT2 +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple +| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it +| ... | and send to another DUT, where packets are decrypted and sent back to TG +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, number of flows per flow-group equals to +| ... | number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to both streams. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | HW_DH895xcc +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${dut1_if2_ip4}= | 100.0.0.1 +| ${dut2_if1_ip4}= | 100.0.0.2 +| ${dut2_if2_ip4}= | 192.168.20.1 +| ${tg_if2_ip4}= | 192.168.20.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${1000} +# Traffic profile: +| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUTs runs IPsec tunneling AES_128_GCM config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES GCM 128 +| | ${auth_alg}= | Set Variable | ${NONE} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Enable IPSec Async Mode on all VPP DUTs +| | And Initialize IPSec in 3-node circular topology +| | And VPP IPsec Add Multiple Tunnels +| | ... | ${nodes} | ${DUT1_${int}2}[0] | ${DUT2_${int}1}[0] | ${n_tunnels} +| | ... | ${encr_alg} | ${auth_alg} | ${dut1_if2_ip4} | ${dut2_if1_ip4} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128gcm-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128gcm-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128gcm-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128gcm-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128gcm-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128gcm-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128gcm-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128gcm-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128gcm-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-policy-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-policy-aes256gcm-ndrpdr.robot new file mode 100644 index 0000000000..14a234f1d4 --- /dev/null +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-policy-aes256gcm-ndrpdr.robot @@ -0,0 +1,151 @@ +# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2020 Intel and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | SCALE | NDRPDR +| ... | IP4FWD | IPSEC | IPSECHW | ASYNC | IPSECTUN | NIC_Intel-X710 | TNL_1000 +| ... | AES_256_GCM | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec1000tnlhwasync-ip4base-policy-aes256gcm +| +| Suite Setup | Setup suite topology interfaces | performance | ipsechw +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance +| +| Test Template | Local Template +| +| Documentation | *IPv4 IPsec tunnel mode performance test suite.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, +| ... | Eth-IPv4-IPSec on DUT1-DUT2 +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple +| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it +| ... | and send to another DUT, where packets are decrypted and sent back to TG +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, number of flows per flow-group equals to +| ... | number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to both streams. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | HW_DH895xcc +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${dut1_if2_ip4}= | 100.0.0.1 +| ${dut2_if1_ip4}= | 100.0.0.2 +| ${dut2_if2_ip4}= | 192.168.20.1 +| ${tg_if2_ip4}= | 192.168.20.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${1000} +# Traffic profile: +| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUTs runs IPsec tunneling AES_256_GCM config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES GCM 256 +| | ${auth_alg}= | Set Variable | ${NONE} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Enable IPSec Async Mode on all VPP DUTs +| | And Initialize IPSec in 3-node circular topology +| | And VPP IPsec Add Multiple Tunnels +| | ... | ${nodes} | ${DUT1_${int}2}[0] | ${DUT2_${int}1}[0] | ${n_tunnels} +| | ... | ${encr_alg} | ${auth_alg} | ${dut1_if2_ip4} | ${dut2_if1_ip4} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes256gcm-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes256gcm-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes256gcm-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes256gcm-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes256gcm-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes256gcm-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes256gcm-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes256gcm-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes256gcm-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot new file mode 100644 index 0000000000..9f7af11259 --- /dev/null +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot @@ -0,0 +1,151 @@ +# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2020 Intel and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1 +| ... | IP4FWD | IPSEC | IPSECHW | ASYNC | IPSECINT | NIC_Intel-X710 | BASE +| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec1tnlhwasync-ip4base-int-aes128cbc-hmac256sha +| +| Suite Setup | Setup suite topology interfaces | performance | ipsechw +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, +| ... | Eth-IPv4-IPSec on DUT1-DUT2 +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple +| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it +| ... | and send to another DUT, where packets are decrypted and sent back to TG +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, number of flows per flow-group equals to +| ... | number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to both streams. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | HW_DH895xcc +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${62} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${dut1_if2_ip4}= | 100.0.0.1 +| ${dut2_if1_ip4}= | 200.0.0.2 +| ${dut2_if2_ip4}= | 192.168.20.1 +| ${tg_if2_ip4}= | 192.168.20.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_256 config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA 256 128 +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Enable IPSec Async Mode on all VPP DUTs +| | And Initialize IPSec in 3-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] +| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec1tnlhwasync-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec1tnlhwasync-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec1tnlhwasync-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec1tnlhwasync-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec1tnlhwasync-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec1tnlhwasync-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec1tnlhwasync-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec1tnlhwasync-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec1tnlhwasync-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot new file mode 100644 index 0000000000..1ee9820d43 --- /dev/null +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot @@ -0,0 +1,151 @@ +# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2020 Intel and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1 +| ... | IP4FWD | IPSEC | IPSECHW | ASYNC | IPSECINT | NIC_Intel-X710 | BASE +| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec1tnlhwasync-ip4base-int-aes128cbc-hmac512sha +| +| Suite Setup | Setup suite topology interfaces | performance | ipsechw +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, +| ... | Eth-IPv4-IPSec on DUT1-DUT2 +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple +| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it +| ... | and send to another DUT, where packets are decrypted and sent back to TG +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, number of flows per flow-group equals to +| ... | number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to both streams. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | HW_DH895xcc +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${78} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${dut1_if2_ip4}= | 100.0.0.1 +| ${dut2_if1_ip4}= | 200.0.0.2 +| ${dut2_if2_ip4}= | 192.168.20.1 +| ${tg_if2_ip4}= | 192.168.20.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA 512 256 +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Enable IPSec Async Mode on all VPP DUTs +| | And Initialize IPSec in 3-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] +| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec1tnlhwasync-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec1tnlhwasync-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec1tnlhwasync-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec1tnlhwasync-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec1tnlhwasync-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec1tnlhwasync-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec1tnlhwasync-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec1tnlhwasync-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec1tnlhwasync-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-int-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-int-aes128gcm-ndrpdr.robot new file mode 100644 index 0000000000..00fb8f7e10 --- /dev/null +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-int-aes128gcm-ndrpdr.robot @@ -0,0 +1,151 @@ +# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2020 Intel and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1 +| ... | IP4FWD | IPSEC | IPSECHW | ASYNC | IPSECINT | NIC_Intel-X710 | BASE +| ... | AES_128_GCM | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec1tnlhwasync-ip4base-int-aes128gcm +| +| Suite Setup | Setup suite topology interfaces | performance | ipsechw +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, +| ... | Eth-IPv4-IPSec on DUT1-DUT2 +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple +| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it +| ... | and send to another DUT, where packets are decrypted and sent back to TG +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, number of flows per flow-group equals to +| ... | number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to both streams. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | HW_DH895xcc +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${dut1_if2_ip4}= | 100.0.0.1 +| ${dut2_if1_ip4}= | 200.0.0.2 +| ${dut2_if2_ip4}= | 192.168.20.1 +| ${tg_if2_ip4}= | 192.168.20.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES GCM 128 +| | ${auth_alg}= | Set Variable | ${NONE} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Enable IPSec Async Mode on all VPP DUTs +| | And Initialize IPSec in 3-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] +| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec1tnlhwasync-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec1tnlhwasync-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec1tnlhwasync-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec1tnlhwasync-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec1tnlhwasync-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec1tnlhwasync-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec1tnlhwasync-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec1tnlhwasync-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec1tnlhwasync-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-int-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-int-aes256gcm-ndrpdr.robot new file mode 100644 index 0000000000..533fd1370a --- /dev/null +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-int-aes256gcm-ndrpdr.robot @@ -0,0 +1,151 @@ +# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2020 Intel and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1 +| ... | IP4FWD | IPSEC | IPSECHW | ASYNC | IPSECINT | NIC_Intel-X710 | BASE +| ... | AES_256_GCM | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec1tnlhwasync-ip4base-int-aes256gcm +| +| Suite Setup | Setup suite topology interfaces | performance | ipsechw +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, +| ... | Eth-IPv4-IPSec on DUT1-DUT2 +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple +| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it +| ... | and send to another DUT, where packets are decrypted and sent back to TG +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, number of flows per flow-group equals to +| ... | number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to both streams. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | HW_DH895xcc +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${dut1_if2_ip4}= | 100.0.0.1 +| ${dut2_if1_ip4}= | 200.0.0.2 +| ${dut2_if2_ip4}= | 192.168.20.1 +| ${tg_if2_ip4}= | 192.168.20.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES GCM 256 +| | ${auth_alg}= | Set Variable | ${NONE} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Enable IPSec Async Mode on all VPP DUTs +| | And Initialize IPSec in 3-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] +| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec1tnlhwasync-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec1tnlhwasync-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec1tnlhwasync-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec1tnlhwasync-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec1tnlhwasync-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec1tnlhwasync-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec1tnlhwasync-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec1tnlhwasync-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec1tnlhwasync-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-policy-aes128cbc-hmac256sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-policy-aes128cbc-hmac256sha-ndrpdr.robot new file mode 100644 index 0000000000..fcacee3d40 --- /dev/null +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-policy-aes128cbc-hmac256sha-ndrpdr.robot @@ -0,0 +1,150 @@ +# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2020 Intel and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1 +| ... | IP4FWD | IPSEC | IPSECHW | ASYNC | IPSECTUN | NIC_Intel-X710 | BASE +| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec1tnlhwasync-ip4base-policy-aes128cbc-hmac256sha +| +| Suite Setup | Setup suite topology interfaces | performance | ipsechw +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance +| +| Test Template | Local Template +| +| Documentation | *IPv4 IPsec tunnel mode performance test suite.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, +| ... | Eth-IPv4-IPSec on DUT1-DUT2 +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple +| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it +| ... | and send to another DUT, where packets are decrypted and sent back to TG +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, number of flows per flow-group equals to +| ... | number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to both streams. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | HW_DH895xcc +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${62} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${dut1_if2_ip4}= | 100.0.0.1 +| ${dut2_if1_ip4}= | 100.0.0.2 +| ${dut2_if2_ip4}= | 192.168.20.1 +| ${tg_if2_ip4}= | 192.168.20.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUTs runs IPsec tunneling AES_CBC_128 / HMAC_256_SHA config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA 256 128 +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Enable IPSec Async Mode on all VPP DUTs +| | And Initialize IPSec in 3-node circular topology +| | And VPP IPsec Add Multiple Tunnels +| | ... | ${nodes} | ${DUT1_${int}2}[0] | ${DUT2_${int}1}[0] | ${n_tunnels} +| | ... | ${encr_alg} | ${auth_alg} | ${dut1_if2_ip4} | ${dut2_if1_ip4} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec1tnlhwasync-ip4base-policy-aes128cbc-hmac256sha-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec1tnlhwasync-ip4base-policy-aes128cbc-hmac256sha-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec1tnlhwasync-ip4base-policy-aes128cbc-hmac256sha-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec1tnlhwasync-ip4base-policy-aes128cbc-hmac256sha-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec1tnlhwasync-ip4base-policy-aes128cbc-hmac256sha-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec1tnlhwasync-ip4base-policy-aes128cbc-hmac256sha-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec1tnlhwasync-ip4base-policy-aes128cbc-hmac256sha-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec1tnlhwasync-ip4base-policy-aes128cbc-hmac256sha-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec1tnlhwasync-ip4base-policy-aes128cbc-hmac256sha-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-policy-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-policy-aes128cbc-hmac512sha-ndrpdr.robot new file mode 100644 index 0000000000..5930590a92 --- /dev/null +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-policy-aes128cbc-hmac512sha-ndrpdr.robot @@ -0,0 +1,150 @@ +# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2020 Intel and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1 +| ... | IP4FWD | IPSEC | IPSECHW | ASYNC | IPSECTUN | NIC_Intel-X710 | BASE +| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec1tnlhwasync-ip4base-policy-aes128cbc-hmac512sha +| +| Suite Setup | Setup suite topology interfaces | performance | ipsechw +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance +| +| Test Template | Local Template +| +| Documentation | *IPv4 IPsec tunnel mode performance test suite.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, +| ... | Eth-IPv4-IPSec on DUT1-DUT2 +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple +| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it +| ... | and send to another DUT, where packets are decrypted and sent back to TG +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, number of flows per flow-group equals to +| ... | number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to both streams. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | HW_DH895xcc +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${78} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${dut1_if2_ip4}= | 100.0.0.1 +| ${dut2_if1_ip4}= | 100.0.0.2 +| ${dut2_if2_ip4}= | 192.168.20.1 +| ${tg_if2_ip4}= | 192.168.20.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUTs runs IPsec tunneling AES_CBC_128 / HMAC_512_SHA config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA 512 256 +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Enable IPSec Async Mode on all VPP DUTs +| | And Initialize IPSec in 3-node circular topology +| | And VPP IPsec Add Multiple Tunnels +| | ... | ${nodes} | ${DUT1_${int}2}[0] | ${DUT2_${int}1}[0] | ${n_tunnels} +| | ... | ${encr_alg} | ${auth_alg} | ${dut1_if2_ip4} | ${dut2_if1_ip4} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec1tnlhwasync-ip4base-policy-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec1tnlhwasync-ip4base-policy-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec1tnlhwasync-ip4base-policy-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec1tnlhwasync-ip4base-policy-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec1tnlhwasync-ip4base-policy-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec1tnlhwasync-ip4base-policy-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec1tnlhwasync-ip4base-policy-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec1tnlhwasync-ip4base-policy-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec1tnlhwasync-ip4base-policy-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-policy-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-policy-aes128gcm-ndrpdr.robot new file mode 100644 index 0000000000..55ef5abd30 --- /dev/null +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-policy-aes128gcm-ndrpdr.robot @@ -0,0 +1,151 @@ +# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2020 Intel and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1 +| ... | IP4FWD | IPSEC | IPSECHW | ASYNC | IPSECTUN | NIC_Intel-X710 | BASE +| ... | AES_128_GCM | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec1tnlhwasync-ip4base-policy-aes128gcm +| +| Suite Setup | Setup suite topology interfaces | performance | ipsechw +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance +| +| Test Template | Local Template +| +| Documentation | *IPv4 IPsec tunnel mode performance test suite.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, +| ... | Eth-IPv4-IPSec on DUT1-DUT2 +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple +| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it +| ... | and send to another DUT, where packets are decrypted and sent back to TG +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, number of flows per flow-group equals to +| ... | number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to both streams. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | HW_DH895xcc +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${dut1_if2_ip4}= | 100.0.0.1 +| ${dut2_if1_ip4}= | 100.0.0.2 +| ${dut2_if2_ip4}= | 192.168.20.1 +| ${tg_if2_ip4}= | 192.168.20.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUTs runs IPsec tunneling AES_128_GCM config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES GCM 128 +| | ${auth_alg}= | Set Variable | ${NONE} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Enable IPSec Async Mode on all VPP DUTs +| | And Initialize IPSec in 3-node circular topology +| | And VPP IPsec Add Multiple Tunnels +| | ... | ${nodes} | ${DUT1_${int}2}[0] | ${DUT2_${int}1}[0] | ${n_tunnels} +| | ... | ${encr_alg} | ${auth_alg} | ${dut1_if2_ip4} | ${dut2_if1_ip4} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec1tnlhwasync-ip4base-policy-aes128gcm-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec1tnlhwasync-ip4base-policy-aes128gcm-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec1tnlhwasync-ip4base-policy-aes128gcm-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec1tnlhwasync-ip4base-policy-aes128gcm-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec1tnlhwasync-ip4base-policy-aes128gcm-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec1tnlhwasync-ip4base-policy-aes128gcm-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec1tnlhwasync-ip4base-policy-aes128gcm-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec1tnlhwasync-ip4base-policy-aes128gcm-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec1tnlhwasync-ip4base-policy-aes128gcm-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-policy-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-policy-aes256gcm-ndrpdr.robot new file mode 100644 index 0000000000..5260d72538 --- /dev/null +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-policy-aes256gcm-ndrpdr.robot @@ -0,0 +1,151 @@ +# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2020 Intel and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1 +| ... | IP4FWD | IPSEC | IPSECHW | ASYNC | IPSECTUN | NIC_Intel-X710 | BASE +| ... | AES_256_GCM | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec1tnlhwasync-ip4base-policy-aes256gcm +| +| Suite Setup | Setup suite topology interfaces | performance | ipsechw +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance +| +| Test Template | Local Template +| +| Documentation | *IPv4 IPsec tunnel mode performance test suite.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, +| ... | Eth-IPv4-IPSec on DUT1-DUT2 +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple +| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it +| ... | and send to another DUT, where packets are decrypted and sent back to TG +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, number of flows per flow-group equals to +| ... | number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to both streams. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | HW_DH895xcc +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${dut1_if2_ip4}= | 100.0.0.1 +| ${dut2_if1_ip4}= | 100.0.0.2 +| ${dut2_if2_ip4}= | 192.168.20.1 +| ${tg_if2_ip4}= | 192.168.20.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUTs runs IPsec tunneling AES_256_GCM config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES GCM 256 +| | ${auth_alg}= | Set Variable | ${NONE} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Enable IPSec Async Mode on all VPP DUTs +| | And Initialize IPSec in 3-node circular topology +| | And VPP IPsec Add Multiple Tunnels +| | ... | ${nodes} | ${DUT1_${int}2}[0] | ${DUT2_${int}1}[0] | ${n_tunnels} +| | ... | ${encr_alg} | ${auth_alg} | ${dut1_if2_ip4} | ${dut2_if1_ip4} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec1tnlhwasync-ip4base-policy-aes256gcm-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec1tnlhwasync-ip4base-policy-aes256gcm-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec1tnlhwasync-ip4base-policy-aes256gcm-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec1tnlhwasync-ip4base-policy-aes256gcm-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec1tnlhwasync-ip4base-policy-aes256gcm-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec1tnlhwasync-ip4base-policy-aes256gcm-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec1tnlhwasync-ip4base-policy-aes256gcm-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec1tnlhwasync-ip4base-policy-aes256gcm-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec1tnlhwasync-ip4base-policy-aes256gcm-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlhwasync-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlhwasync-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot new file mode 100644 index 0000000000..39f1047bc0 --- /dev/null +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlhwasync-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot @@ -0,0 +1,151 @@ +# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2020 Intel and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_4 +| ... | IP4FWD | IPSEC | IPSECHW | ASYNC | IPSECINT | NIC_Intel-X710 | SCALE +| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec4tnlhwasync-ip4base-int-aes128cbc-hmac256sha +| +| Suite Setup | Setup suite topology interfaces | performance | ipsechw +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, +| ... | Eth-IPv4-IPSec on DUT1-DUT2 +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple +| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it +| ... | and send to another DUT, where packets are decrypted and sent back to TG +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, number of flows per flow-group equals to +| ... | number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to both streams. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | HW_DH895xcc +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${62} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${dut1_if2_ip4}= | 100.0.0.1 +| ${dut2_if1_ip4}= | 200.0.0.2 +| ${dut2_if2_ip4}= | 192.168.20.1 +| ${tg_if2_ip4}= | 192.168.20.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${4} +# Traffic profile: +| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_256 config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA 256 128 +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Enable IPSec Async Mode on all VPP DUTs +| | And Initialize IPSec in 3-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] +| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec4tnlhwasync-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec4tnlhwasync-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec4tnlhwasync-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec4tnlhwasync-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec4tnlhwasync-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec4tnlhwasync-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec4tnlhwasync-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec4tnlhwasync-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec4tnlhwasync-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlhwasync-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlhwasync-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot new file mode 100644 index 0000000000..a11d872cee --- /dev/null +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlhwasync-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot @@ -0,0 +1,151 @@ +# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2020 Intel and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_4 +| ... | IP4FWD | IPSEC | IPSECHW | ASYNC | IPSECINT | NIC_Intel-X710 | SCALE +| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec4tnlhwasync-ip4base-int-aes128cbc-hmac512sha +| +| Suite Setup | Setup suite topology interfaces | performance | ipsechw +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, +| ... | Eth-IPv4-IPSec on DUT1-DUT2 +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple +| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it +| ... | and send to another DUT, where packets are decrypted and sent back to TG +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, number of flows per flow-group equals to +| ... | number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to both streams. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | HW_DH895xcc +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${78} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${dut1_if2_ip4}= | 100.0.0.1 +| ${dut2_if1_ip4}= | 200.0.0.2 +| ${dut2_if2_ip4}= | 192.168.20.1 +| ${tg_if2_ip4}= | 192.168.20.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${4} +# Traffic profile: +| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA 512 256 +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Enable IPSec Async Mode on all VPP DUTs +| | And Initialize IPSec in 3-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] +| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec4tnlhwasync-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec4tnlhwasync-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec4tnlhwasync-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec4tnlhwasync-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec4tnlhwasync-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec4tnlhwasync-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec4tnlhwasync-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec4tnlhwasync-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec4tnlhwasync-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlhwasync-ip4base-int-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlhwasync-ip4base-int-aes128gcm-ndrpdr.robot new file mode 100644 index 0000000000..8525f78698 --- /dev/null +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlhwasync-ip4base-int-aes128gcm-ndrpdr.robot @@ -0,0 +1,151 @@ +# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2020 Intel and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_4 +| ... | IP4FWD | IPSEC | IPSECHW | ASYNC | IPSECINT | NIC_Intel-X710 | SCALE +| ... | AES_128_GCM | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec4tnlhwasync-ip4base-int-aes128gcm +| +| Suite Setup | Setup suite topology interfaces | performance | ipsechw +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, +| ... | Eth-IPv4-IPSec on DUT1-DUT2 +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple +| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it +| ... | and send to another DUT, where packets are decrypted and sent back to TG +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, number of flows per flow-group equals to +| ... | number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to both streams. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | HW_DH895xcc +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${dut1_if2_ip4}= | 100.0.0.1 +| ${dut2_if1_ip4}= | 200.0.0.2 +| ${dut2_if2_ip4}= | 192.168.20.1 +| ${tg_if2_ip4}= | 192.168.20.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${4} +# Traffic profile: +| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES GCM 128 +| | ${auth_alg}= | Set Variable | ${NONE} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Enable IPSec Async Mode on all VPP DUTs +| | And Initialize IPSec in 3-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] +| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec4tnlhwasync-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec4tnlhwasync-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec4tnlhwasync-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec4tnlhwasync-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec4tnlhwasync-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec4tnlhwasync-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec4tnlhwasync-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec4tnlhwasync-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec4tnlhwasync-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlhwasync-ip4base-int-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlhwasync-ip4base-int-aes256gcm-ndrpdr.robot new file mode 100644 index 0000000000..89965f9904 --- /dev/null +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlhwasync-ip4base-int-aes256gcm-ndrpdr.robot @@ -0,0 +1,151 @@ +# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2020 Intel and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_4 +| ... | IP4FWD | IPSEC | IPSECHW | ASYNC | IPSECINT | NIC_Intel-X710 | SCALE +| ... | AES_256_GCM | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec4tnlhwasync-ip4base-int-aes256gcm +| +| Suite Setup | Setup suite topology interfaces | performance | ipsechw +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, +| ... | Eth-IPv4-IPSec on DUT1-DUT2 +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple +| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it +| ... | and send to another DUT, where packets are decrypted and sent back to TG +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, number of flows per flow-group equals to +| ... | number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to both streams. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | HW_DH895xcc +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${dut1_if2_ip4}= | 100.0.0.1 +| ${dut2_if1_ip4}= | 200.0.0.2 +| ${dut2_if2_ip4}= | 192.168.20.1 +| ${tg_if2_ip4}= | 192.168.20.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${4} +# Traffic profile: +| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES GCM 256 +| | ${auth_alg}= | Set Variable | ${NONE} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Enable IPSec Async Mode on all VPP DUTs +| | And Initialize IPSec in 3-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] +| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec4tnlhwasync-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec4tnlhwasync-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec4tnlhwasync-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec4tnlhwasync-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec4tnlhwasync-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec4tnlhwasync-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec4tnlhwasync-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec4tnlhwasync-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec4tnlhwasync-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} |