aboutsummaryrefslogtreecommitdiffstats
path: root/tests/vpp
diff options
context:
space:
mode:
Diffstat (limited to 'tests/vpp')
-rw-r--r--tests/vpp/func/__init__.robot37
-rw-r--r--tests/vpp/func/l2xc/eth2p-dot1ad-l2xcbase-func.robot70
2 files changed, 0 insertions, 107 deletions
diff --git a/tests/vpp/func/__init__.robot b/tests/vpp/func/__init__.robot
deleted file mode 100644
index aaf7ac01ba..0000000000
--- a/tests/vpp/func/__init__.robot
+++ /dev/null
@@ -1,37 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/shared/default.robot
-| Resource | resources/libraries/robot/shared/interfaces.robot
-|
-| Library | resources.libraries.python.SetupFramework
-| Library | resources.libraries.python.SetupFramework.CleanupFramework
-|
-| Suite Setup | Run Keywords | Setup Functional Global Variables
-| ... | AND | Setup Framework | ${nodes}
-| ... | AND | Install Vpp On All Duts | ${nodes} | ${VPP_PKG_DIR}
-| ... | AND | Verify Vpp On All Duts | ${nodes}
-| ... | AND | Update All Interface Data On All Nodes | ${nodes}
-|
-| Suite Teardown | Cleanup Framework | ${nodes}
-
-*** Keywords ***
-| Setup Functional Global Variables
-| | [Documentation]
-| | ... | Setup suite Variables. Variables are used across functional testing.
-| | ...
-| | ... | _NOTE:_ This KW sets following suite variables:
-| | ... | - vpp_pkg_dir - Path to directory where VPP packages are stored.
-| |
-| | Set Global Variable | ${VPP_PKG_DIR} | /scratch/vpp/
diff --git a/tests/vpp/func/l2xc/eth2p-dot1ad-l2xcbase-func.robot b/tests/vpp/func/l2xc/eth2p-dot1ad-l2xcbase-func.robot
deleted file mode 100644
index 3492d84029..0000000000
--- a/tests/vpp/func/l2xc/eth2p-dot1ad-l2xcbase-func.robot
+++ /dev/null
@@ -1,70 +0,0 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/shared/default.robot
-| Resource | resources/libraries/robot/shared/testing_path.robot
-| Resource | resources/libraries/robot/l2/tagging.robot
-| Resource | resources/libraries/robot/l2/l2_traffic.robot
-| Library | resources.libraries.python.Trace
-| Force Tags | 3_NODE_SINGLE_LINK_TOPO | HW_ENV | VM_ENV
-| Test Setup | Set up functional test
-| Test Teardown | Tear down functional test
-| Documentation | *L2 cross-connect with QinQ test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet encapsulations:* Eth-dot1ad-IPv4-ICMPv4 on DUT1-DUT2,
-| ... | Eth-IPv4-ICMPv4 on TG-DUTn for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2
-| ... | cross-connect (L2XC) switching with 802.1ad QinQ VLAN tag push and pop.
-| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are
-| ... | sent in both directions by TG on links to DUT1 and DUT2; on receive TG
-| ... | verifies packets for correctness and their IPv4 src-addr, dst-addr and
-| ... | MAC addresses.
-| ... | *[Ref] Applicable standard specifications:* IEEE 802.1ad.
-
-*** Variables ***
-| ${subid}= | 10
-| ${outer_vlan_id}= | 100
-| ${inner_vlan_id}= | 200
-| ${type_subif}= | two_tags
-| ${tag_rewrite_method}= | pop-2
-
-*** Test Cases ***
-| TC01: DUT1 and DUT2 with L2XC and two VLAN push-pop switch ICMPv4 between two TG links
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv4-ICMPv4 on \
-| | ... | DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUTn. [Cfg] On DUT1 and DUT2
-| | ... | configure L2 cross-connect (L2XC), each with one interface to TG
-| | ... | and one Ethernet interface towards the other DUT; each DUT
-| | ... | pushes two VLAN tags on packets received from local TG, and
-| | ... | popping two VLAN tags on packets transmitted to local TG. [Ver]
-| | ... | Make TG send ICMPv4 Echo Req in both directions between two of
-| | ... | its interfaces to be switched by DUT1 and DUT2; verify all
-| | ... | packets are received. [Ref] IEEE 802.1ad.
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | When Initialize VLAN sub-interfaces in 3-node circular topology
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut2_node} | ${dut2_to_dut1} | ${subid}
-| | ... | ${outer_vlan_id} | ${inner_vlan_id} | ${type_subif}
-| | And Configure L2 tag rewrite method on interfaces
-| | ... | ${dut1_node} | ${subif_index_1} | ${dut2_node} | ${subif_index_2}
-| | ... | ${tag_rewrite_method}
-| | And Configure L2XC
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${subif_index_1}
-| | And Configure L2XC
-| | ... | ${dut2_node} | ${dut2_to_tg} | ${subif_index_2}
-| | Then Send ICMP packet and verify received packet
-| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2}