diff options
Diffstat (limited to 'tests')
13 files changed, 1482 insertions, 0 deletions
diff --git a/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-gtpu-scapy.robot b/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-gtpu-scapy.robot new file mode 100644 index 0000000000..0b8e44ade6 --- /dev/null +++ b/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-gtpu-scapy.robot @@ -0,0 +1,123 @@ +# Copyright (c) 2021 Intel and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY +| ... | NIC_Intel-X710 | ETH | IP4FWD | FLOW | GTPU | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4-flow-ip4-gtpu +| +| Suite Setup | Setup suite topology interfaces | scapy +| Test Setup | Setup test +| Test Teardown | Tear down test | packet_trace | telemetry +| +| Test Template | Local Template +| +| Documentation | *IP4_GTPU flow test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1 2-node topology with one link\ +| ... | between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IP4-GTPU. +| ... | *[Cfg] DUT configuration:* DUT is configured with IP4_GTPU flow. +| ... | *[Ver] TG verification:* Verify if the flow action is correct. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${overhead}= | ${0} +| ${src_ip}= | 1.1.1.1 +| ${dst_ip}= | 2.2.2.2 +| ${teid}= | ${12345} +| ${rxq}= | ${4} +# Telemetry +| ${telemetry_profile}= | vpp_test_teardown + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Ver] Make TG send IP4-GTPU packet routed over DUT1 interfaces.\ +| | ... | Make VPP verify flow packet is correct. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer. Type: integer +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${rxq} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs | with_trace=${True} +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | +| | Clear Packet Trace On Dut | ${dut1} +| | Vpp Enable Traces On Dut | ${dut1} +| | ${flow_index} = | And Vpp Create Ip4 Gtpu Flow | ${dut1} +| | ... | ${src_ip} | ${dst_ip} | teid=${teid} +| | ... | action=redirect-to-queue | value=${${rxq}-1} +| | And Vpp Flow Enable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index} +| | Then Send flow packet and verify action +| | ... | ${tg} | ${TG_pf1}[0] | ${DUT1_${int}1_mac}[0] +| | ... | flow_type=IP4 | proto=GTPU +| | ... | src_ip=${src_ip} | dst_ip=${dst_ip} +| | ... | value=${teid} +| | ... | action=redirect-to-queue | action_value=${${rxq}-1} +| | And Vpp Flow Disable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index} +| | And Vpp Flow Del | ${dut1} | ${flow_index} +| | +| | Clear Packet Trace On Dut | ${dut1} +| | Vpp Enable Traces On Dut | ${dut1} +| | ${flow_index} = | And Vpp Create Ip4 Gtpu Flow | ${dut1} +| | ... | ${src_ip} | ${dst_ip} | teid=${teid} +| | ... | action=drop +| | And Vpp Flow Enable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index} +| | Then Send flow packet and verify action +| | ... | ${tg} | ${TG_pf1}[0] | ${DUT1_${int}1_mac}[0] +| | ... | flow_type=IP4 | proto=GTPU +| | ... | src_ip=${src_ip} | dst_ip=${dst_ip} +| | ... | value=${teid} +| | ... | action=drop +| | And Vpp Flow Disable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index} +| | And Vpp Flow Del | ${dut1} | ${flow_index} +| | +| | Clear Packet Trace On Dut | ${dut1} +| | Vpp Enable Traces On Dut | ${dut1} +| | ${flow_index} = | And Vpp Create Ip4 Gtpu Flow | ${dut1} +| | ... | ${src_ip} | ${dst_ip} | teid=${teid} +| | ... | action=mark | value=${7} +| | And Vpp Flow Enable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index} +| | Then Send flow packet and verify action +| | ... | ${tg} | ${TG_pf1}[0] | ${DUT1_${int}1_mac}[0] +| | ... | flow_type=IP4 | proto=GTPU +| | ... | src_ip=${src_ip} | dst_ip=${dst_ip} +| | ... | value=${teid} +| | ... | action=mark +| | And Vpp Flow Disable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index} +| | And Vpp Flow Del | ${dut1} | ${flow_index} + +*** Test Cases *** +| 64B-0c-ethip4-flow-ip4-gtpu-scapy +| | [Tags] | 64B | 0C +| | frame_size=${64} | phy_cores=${0} diff --git a/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-ipsec-ah-scapy.robot b/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-ipsec-ah-scapy.robot new file mode 100644 index 0000000000..64829d914f --- /dev/null +++ b/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-ipsec-ah-scapy.robot @@ -0,0 +1,123 @@ +# Copyright (c) 2021 Intel and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY +| ... | NIC_Intel-X710 | ETH | IP4FWD | FLOW | IPSEC | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4-flow-ip4-ipsec-ah +| +| Suite Setup | Setup suite topology interfaces | scapy +| Test Setup | Setup test +| Test Teardown | Tear down test | packet_trace | telemetry +| +| Test Template | Local Template +| +| Documentation | *IP4_IPSEC flow test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1 2-node topology with one link\ +| ... | between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IP4-AH. +| ... | *[Cfg] DUT configuration:* DUT is configured with IP4_IPSEC flow. +| ... | *[Ver] TG verification:* Verify if the flow action is correct. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${overhead}= | ${0} +| ${src_ip}= | 1.1.1.1 +| ${dst_ip}= | 2.2.2.2 +| ${spi}= | ${12345} +| ${rxq}= | ${4} +# Telemetry +| ${telemetry_profile}= | vpp_test_teardown + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Ver] Make TG send IP4-IPSEC packet routed over DUT1 interfaces.\ +| | ... | Make VPP verify flow packet is correct. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer. Type: integer +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${rxq} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs | with_trace=${True} +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | +| | Clear Packet Trace On Dut | ${dut1} +| | Vpp Enable Traces On Dut | ${dut1} +| | ${flow_index} = | And Vpp Create IP4 Ipsec Flow | ${dut1} +| | ... | proto=AH | spi=${spi} +| | ... | action=redirect-to-queue | value=${${rxq}-1} +| | And Vpp Flow Enable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index} +| | Then Send flow packet and verify action +| | ... | ${tg} | ${TG_pf1}[0] | ${DUT1_${int}1_mac}[0] +| | ... | flow_type=IP4 | proto=AH +| | ... | src_ip=${src_ip} | dst_ip=${dst_ip} +| | ... | value=${spi} +| | ... | action=redirect-to-queue | action_value=${${rxq}-1} +| | And Vpp Flow Disable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index} +| | And Vpp Flow Del | ${dut1} | ${flow_index} +| | +| | Clear Packet Trace On Dut | ${dut1} +| | Vpp Enable Traces On Dut | ${dut1} +| | ${flow_index} = | And Vpp Create IP4 Ipsec Flow | ${dut1} +| | ... | proto=AH | spi=${spi} +| | ... | action=drop +| | And Vpp Flow Enable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index} +| | Then Send flow packet and verify action +| | ... | ${tg} | ${TG_pf1}[0] | ${DUT1_${int}1_mac}[0] +| | ... | flow_type=IP4 | proto=AH +| | ... | src_ip=${src_ip} | dst_ip=${dst_ip} +| | ... | value=${spi} +| | ... | action=drop +| | And Vpp Flow Disable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index} +| | And Vpp Flow Del | ${dut1} | ${flow_index} +| | +| | Clear Packet Trace On Dut | ${dut1} +| | Vpp Enable Traces On Dut | ${dut1} +| | ${flow_index} = | And Vpp Create IP4 Ipsec Flow | ${dut1} +| | ... | proto=AH | spi=${spi} +| | ... | action=mark | value=${7} +| | And Vpp Flow Enable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index} +| | Then Send flow packet and verify action +| | ... | ${tg} | ${TG_pf1}[0] | ${DUT1_${int}1_mac}[0] +| | ... | flow_type=IP4 | proto=AH +| | ... | src_ip=${src_ip} | dst_ip=${dst_ip} +| | ... | value=${spi} +| | ... | action=mark +| | And Vpp Flow Disable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index} +| | And Vpp Flow Del | ${dut1} | ${flow_index} + +*** Test Cases *** +| 64B-0c-ethip4-flow-ip4-ipsec-ah-scapy +| | [Tags] | 64B | 0C +| | frame_size=${64} | phy_cores=${0} diff --git a/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-ipsec-esp-scapy.robot b/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-ipsec-esp-scapy.robot new file mode 100644 index 0000000000..e1c93bf7ee --- /dev/null +++ b/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-ipsec-esp-scapy.robot @@ -0,0 +1,123 @@ +# Copyright (c) 2021 Intel and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY +| ... | NIC_Intel-X710 | ETH | IP4FWD | FLOW | IPSEC | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4-flow-ip4-ipsec-esp +| +| Suite Setup | Setup suite topology interfaces | scapy +| Test Setup | Setup test +| Test Teardown | Tear down test | packet_trace | telemetry +| +| Test Template | Local Template +| +| Documentation | *IP4_IPSEC flow test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1 2-node topology with one link\ +| ... | between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IP4-ESP. +| ... | *[Cfg] DUT configuration:* DUT is configured with IP4_IPSEC flow. +| ... | *[Ver] TG verification:* Verify if the flow action is correct. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${overhead}= | ${0} +| ${src_ip}= | 1.1.1.1 +| ${dst_ip}= | 2.2.2.2 +| ${spi}= | ${12345} +| ${rxq}= | ${4} +# Telemetry +| ${telemetry_profile}= | vpp_test_teardown + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Ver] Make TG send IP4-IPSEC packet routed over DUT1 interfaces.\ +| | ... | Make VPP verify flow packet is correct. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer. Type: integer +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${rxq} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs | with_trace=${True} +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | +| | Clear Packet Trace On Dut | ${dut1} +| | Vpp Enable Traces On Dut | ${dut1} +| | ${flow_index} = | And Vpp Create IP4 Ipsec Flow | ${dut1} +| | ... | proto=ESP | spi=${spi} +| | ... | action=redirect-to-queue | value=${${rxq}-1} +| | And Vpp Flow Enable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index} +| | Then Send flow packet and verify action +| | ... | ${tg} | ${TG_pf1}[0] | ${DUT1_${int}1_mac}[0] +| | ... | flow_type=IP4 | proto=ESP +| | ... | src_ip=${src_ip} | dst_ip=${dst_ip} +| | ... | value=${spi} +| | ... | action=redirect-to-queue | action_value=${${rxq}-1} +| | And Vpp Flow Disable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index} +| | And Vpp Flow Del | ${dut1} | ${flow_index} +| | +| | Clear Packet Trace On Dut | ${dut1} +| | Vpp Enable Traces On Dut | ${dut1} +| | ${flow_index} = | And Vpp Create IP4 Ipsec Flow | ${dut1} +| | ... | proto=ESP | spi=${spi} +| | ... | action=drop +| | And Vpp Flow Enable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index} +| | Then Send flow packet and verify action +| | ... | ${tg} | ${TG_pf1}[0] | ${DUT1_${int}1_mac}[0] +| | ... | flow_type=IP4 | proto=ESP +| | ... | src_ip=${src_ip} | dst_ip=${dst_ip} +| | ... | value=${spi} +| | ... | action=drop +| | And Vpp Flow Disable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index} +| | And Vpp Flow Del | ${dut1} | ${flow_index} +| | +| | Clear Packet Trace On Dut | ${dut1} +| | Vpp Enable Traces On Dut | ${dut1} +| | ${flow_index} = | And Vpp Create IP4 Ipsec Flow | ${dut1} +| | ... | proto=ESP | spi=${spi} +| | ... | action=mark | value=${7} +| | And Vpp Flow Enable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index} +| | Then Send flow packet and verify action +| | ... | ${tg} | ${TG_pf1}[0] | ${DUT1_${int}1_mac}[0] +| | ... | flow_type=IP4 | proto=ESP +| | ... | src_ip=${src_ip} | dst_ip=${dst_ip} +| | ... | value=${spi} +| | ... | action=mark +| | And Vpp Flow Disable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index} +| | And Vpp Flow Del | ${dut1} | ${flow_index} + +*** Test Cases *** +| 64B-0c-ethip4-flow-ip4-ipsec-esp-scapy +| | [Tags] | 64B | 0C +| | frame_size=${64} | phy_cores=${0} diff --git a/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-l2tpv3oip-scapy.robot b/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-l2tpv3oip-scapy.robot new file mode 100644 index 0000000000..c10af0cbb2 --- /dev/null +++ b/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-l2tpv3oip-scapy.robot @@ -0,0 +1,123 @@ +# Copyright (c) 2021 Intel and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY +| ... | NIC_Intel-X710 | ETH | IP4FWD | FLOW | L2TPV3 | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4-flow-ip4-l2tpv3oip +| +| Suite Setup | Setup suite topology interfaces | scapy +| Test Setup | Setup test +| Test Teardown | Tear down test | packet_trace | telemetry +| +| Test Template | Local Template +| +| Documentation | *IP4_L2TPV3OIP flow test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1 2-node topology with one link\ +| ... | between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IP4-L2TPV3. +| ... | *[Cfg] DUT configuration:* DUT is configured with IP4_L2TPV3OIP flow. +| ... | *[Ver] TG verification:* Verify if the flow action is correct. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${overhead}= | ${0} +| ${src_ip}= | 1.1.1.1 +| ${dst_ip}= | 2.2.2.2 +| ${session_id}= | ${12345} +| ${rxq}= | ${4} +# Telemetry +| ${telemetry_profile}= | vpp_test_teardown + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Ver] Make TG send IP4-L2TPV3OIP packet routed over DUT1 interfaces.\ +| | ... | Make VPP verify flow packet is correct. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer. Type: integer +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${rxq} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs | with_trace=${True} +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | +| | Clear Packet Trace On Dut | ${dut1} +| | Vpp Enable Traces On Dut | ${dut1} +| | ${flow_index} = | And Vpp Create IP4 L2tp Flow | ${dut1} +| | ... | session_id=${session_id} +| | ... | action=redirect-to-queue | value=${${rxq}-1} +| | And Vpp Flow Enable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index} +| | Then Send flow packet and verify action +| | ... | ${tg} | ${TG_pf1}[0] | ${DUT1_${int}1_mac}[0] +| | ... | flow_type=IP4 | proto=L2TPV3 +| | ... | src_ip=${src_ip} | dst_ip=${dst_ip} +| | ... | value=${session_id} +| | ... | action=redirect-to-queue | action_value=${${rxq}-1} +| | And Vpp Flow Disable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index} +| | And Vpp Flow Del | ${dut1} | ${flow_index} +| | +| | Clear Packet Trace On Dut | ${dut1} +| | Vpp Enable Traces On Dut | ${dut1} +| | ${flow_index} = | And Vpp Create IP4 L2tp Flow | ${dut1} +| | ... | session_id=${session_id} +| | ... | action=drop +| | And Vpp Flow Enable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index} +| | Then Send flow packet and verify action +| | ... | ${tg} | ${TG_pf1}[0] | ${DUT1_${int}1_mac}[0] +| | ... | flow_type=IP4 | proto=L2TPV3 +| | ... | src_ip=${src_ip} | dst_ip=${dst_ip} +| | ... | value=${session_id} +| | ... | action=drop +| | And Vpp Flow Disable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index} +| | And Vpp Flow Del | ${dut1} | ${flow_index} +| | +| | Clear Packet Trace On Dut | ${dut1} +| | Vpp Enable Traces On Dut | ${dut1} +| | ${flow_index} = | And Vpp Create IP4 L2tp Flow | ${dut1} +| | ... | session_id=${session_id} +| | ... | action=mark | value=${7} +| | And Vpp Flow Enable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index} +| | Then Send flow packet and verify action +| | ... | ${tg} | ${TG_pf1}[0] | ${DUT1_${int}1_mac}[0] +| | ... | flow_type=IP4 | proto=L2TPV3 +| | ... | src_ip=${src_ip} | dst_ip=${dst_ip} +| | ... | value=${session_id} +| | ... | action=mark +| | And Vpp Flow Disable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index} +| | And Vpp Flow Del | ${dut1} | ${flow_index} + +*** Test Cases *** +| 64B-0c-ethip4-flow-ip4-l2tpv3oip-scapy +| | [Tags] | 64B | 0C +| | frame_size=${64} | phy_cores=${0} diff --git a/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-ntuple-tcp-scapy.robot b/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-ntuple-tcp-scapy.robot new file mode 100644 index 0000000000..6aee4a89a7 --- /dev/null +++ b/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-ntuple-tcp-scapy.robot @@ -0,0 +1,124 @@ +# Copyright (c) 2021 Intel and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY +| ... | NIC_Intel-X710 | ETH | IP4FWD | FLOW | NTUPLE | TCP | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4-flow-ip4-ntuple-tcp +| +| Suite Setup | Setup suite topology interfaces | scapy +| Test Setup | Setup test +| Test Teardown | Tear down test | packet_trace | telemetry +| +| Test Template | Local Template +| +| Documentation | *IP4_N_TUPLE flow test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1 2-node topology with one link\ +| ... | between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IP4-TCP. +| ... | *[Cfg] DUT configuration:* DUT is configured with IP4_N_TUPLE flow. +| ... | *[Ver] TG verification:* Verify if the flow action is correct. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${overhead}= | ${0} +| ${src_ip}= | 1.1.1.1 +| ${dst_ip}= | 2.2.2.2 +| ${src_port}= | ${100} +| ${dst_port}= | ${200} +| ${rxq}= | ${4} +# Telemetry +| ${telemetry_profile}= | vpp_test_teardown + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Ver] Make TG send IP4 packet routed over DUT1 interfaces.\ +| | ... | Make VPP verify flow packet is correct. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer. Type: integer +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${rxq} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs | with_trace=${True} +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | +| | Clear Packet Trace On Dut | ${dut1} +| | Vpp Enable Traces On Dut | ${dut1} +| | ${flow_index} = | And Vpp Create Ip4 N Tuple Flow | ${dut1} +| | ... | ${src_ip} | ${dst_ip} | ${src_port} | ${dst_port} +| | ... | proto=TCP | action=redirect-to-queue | value=${${rxq}-1} +| | And Vpp Flow Enable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index} +| | Then Send flow packet and verify action +| | ... | ${tg} | ${TG_pf1}[0] | ${DUT1_${int}1_mac}[0] +| | ... | flow_type=IP4 | proto=TCP +| | ... | src_ip=${src_ip} | dst_ip=${dst_ip} +| | ... | src_port=${src_port} | dst_port=${dst_port} +| | ... | action=redirect-to-queue | action_value=${${rxq}-1} +| | And Vpp Flow Disable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index} +| | And Vpp Flow Del | ${dut1} | ${flow_index} +| | +| | Clear Packet Trace On Dut | ${dut1} +| | Vpp Enable Traces On Dut | ${dut1} +| | ${flow_index} = | And Vpp Create Ip4 N Tuple Flow | ${dut1} +| | ... | ${src_ip} | ${dst_ip} | ${src_port} | ${dst_port} +| | ... | proto=TCP | action=drop +| | And Vpp Flow Enable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index} +| | Then Send flow packet and verify action +| | ... | ${tg} | ${TG_pf1}[0] | ${DUT1_${int}1_mac}[0] +| | ... | flow_type=IP4 | proto=TCP +| | ... | src_ip=${src_ip} | dst_ip=${dst_ip} +| | ... | src_port=${src_port} | dst_port=${dst_port} +| | ... | action=drop +| | And Vpp Flow Disable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index} +| | And Vpp Flow Del | ${dut1} | ${flow_index} +| | +| | Clear Packet Trace On Dut | ${dut1} +| | Vpp Enable Traces On Dut | ${dut1} +| | ${flow_index} = | And Vpp Create Ip4 N Tuple Flow | ${dut1} +| | ... | ${src_ip} | ${dst_ip} | ${src_port} | ${dst_port} +| | ... | proto=TCP | action=mark | value=${7} +| | And Vpp Flow Enable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index} +| | Then Send flow packet and verify action +| | ... | ${tg} | ${TG_pf1}[0] | ${DUT1_${int}1_mac}[0] +| | ... | flow_type=IP4 | proto=TCP +| | ... | src_ip=${src_ip} | dst_ip=${dst_ip} +| | ... | src_port=${src_port} | dst_port=${dst_port} +| | ... | action=mark +| | And Vpp Flow Disable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index} +| | And Vpp Flow Del | ${dut1} | ${flow_index} + +*** Test Cases *** +| 64B-0c-ethip4-flow-ip4-ntuple-tcp-scapy +| | [Tags] | 64B | 0C +| | frame_size=${64} | phy_cores=${0} diff --git a/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-ntuple-udp-scapy.robot b/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-ntuple-udp-scapy.robot new file mode 100644 index 0000000000..f9e747641e --- /dev/null +++ b/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-ntuple-udp-scapy.robot @@ -0,0 +1,124 @@ +# Copyright (c) 2021 Intel and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY +| ... | NIC_Intel-X710 | ETH | IP4FWD | FLOW | NTUPLE | UDP | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4-flow-ip4-ntuple-udp +| +| Suite Setup | Setup suite topology interfaces | scapy +| Test Setup | Setup test +| Test Teardown | Tear down test | packet_trace | telemetry +| +| Test Template | Local Template +| +| Documentation | *IP4_N_TUPLE flow test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1 2-node topology with one link\ +| ... | between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IP4-UDP. +| ... | *[Cfg] DUT configuration:* DUT is configured with IP4_N_TUPLE flow. +| ... | *[Ver] TG verification:* Verify if the flow action is correct. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${overhead}= | ${0} +| ${src_ip}= | 1.1.1.1 +| ${dst_ip}= | 2.2.2.2 +| ${src_port}= | ${100} +| ${dst_port}= | ${200} +| ${rxq}= | ${4} +# Telemetry +| ${telemetry_profile}= | vpp_test_teardown + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Ver] Make TG send IP4 packet routed over DUT1 interfaces.\ +| | ... | Make VPP verify flow packet is correct. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer. Type: integer +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${rxq} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs | with_trace=${True} +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | +| | Clear Packet Trace On Dut | ${dut1} +| | Vpp Enable Traces On Dut | ${dut1} +| | ${flow_index} = | And Vpp Create Ip4 N Tuple Flow | ${dut1} +| | ... | ${src_ip} | ${dst_ip} | ${src_port} | ${dst_port} +| | ... | proto=UDP | action=redirect-to-queue | value=${${rxq}-1} +| | And Vpp Flow Enable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index} +| | Then Send flow packet and verify action +| | ... | ${tg} | ${TG_pf1}[0] | ${DUT1_${int}1_mac}[0] +| | ... | flow_type=IP4 | proto=UDP +| | ... | src_ip=${src_ip} | dst_ip=${dst_ip} +| | ... | src_port=${src_port} | dst_port=${dst_port} +| | ... | action=redirect-to-queue | action_value=${${rxq}-1} +| | And Vpp Flow Disable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index} +| | And Vpp Flow Del | ${dut1} | ${flow_index} +| | +| | Clear Packet Trace On Dut | ${dut1} +| | Vpp Enable Traces On Dut | ${dut1} +| | ${flow_index} = | And Vpp Create Ip4 N Tuple Flow | ${dut1} +| | ... | ${src_ip} | ${dst_ip} | ${src_port} | ${dst_port} +| | ... | proto=UDP | action=drop +| | And Vpp Flow Enable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index} +| | Then Send flow packet and verify action +| | ... | ${tg} | ${TG_pf1}[0] | ${DUT1_${int}1_mac}[0] +| | ... | flow_type=IP4 | proto=UDP +| | ... | src_ip=${src_ip} | dst_ip=${dst_ip} +| | ... | src_port=${src_port} | dst_port=${dst_port} +| | ... | action=drop +| | And Vpp Flow Disable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index} +| | And Vpp Flow Del | ${dut1} | ${flow_index} +| | +| | Clear Packet Trace On Dut | ${dut1} +| | Vpp Enable Traces On Dut | ${dut1} +| | ${flow_index} = | And Vpp Create Ip4 N Tuple Flow | ${dut1} +| | ... | ${src_ip} | ${dst_ip} | ${src_port} | ${dst_port} +| | ... | proto=UDP | action=mark | value=${7} +| | And Vpp Flow Enable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index} +| | Then Send flow packet and verify action +| | ... | ${tg} | ${TG_pf1}[0] | ${DUT1_${int}1_mac}[0] +| | ... | flow_type=IP4 | proto=UDP +| | ... | src_ip=${src_ip} | dst_ip=${dst_ip} +| | ... | src_port=${src_port} | dst_port=${dst_port} +| | ... | action=mark +| | And Vpp Flow Disable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index} +| | And Vpp Flow Del | ${dut1} | ${flow_index} + +*** Test Cases *** +| 64B-0c-ethip4-flow-ip4-ntuple-udp-scapy +| | [Tags] | 64B | 0C +| | frame_size=${64} | phy_cores=${0} diff --git a/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-tcp-scapy.robot b/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-tcp-scapy.robot new file mode 100644 index 0000000000..b5d3548e1d --- /dev/null +++ b/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-tcp-scapy.robot @@ -0,0 +1,119 @@ +# Copyright (c) 2021 Intel and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY +| ... | NIC_Intel-X710 | ETH | IP4FWD | FLOW | TCP | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4-flow-ip4-tcp +| +| Suite Setup | Setup suite topology interfaces | scapy +| Test Setup | Setup test +| Test Teardown | Tear down test | packet_trace | telemetry +| +| Test Template | Local Template +| +| Documentation | *IP4 flow test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1 2-node topology with one link\ +| ... | between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IP4-TCP. +| ... | *[Cfg] DUT configuration:* DUT is configured with IP4 flow. +| ... | *[Ver] TG verification:* Verify if the flow action is correct. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${overhead}= | ${0} +| ${src_ip}= | 1.1.1.1 +| ${dst_ip}= | 2.2.2.2 +| ${rxq}= | ${4} +# Telemetry +| ${telemetry_profile}= | vpp_test_teardown + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Ver] Make TG send IP4 packet routed over DUT1 interfaces.\ +| | ... | Make VPP verify flow packet is correct. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer. Type: integer +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${rxq} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs | with_trace=${True} +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | +| | Clear Packet Trace On Dut | ${dut1} +| | Vpp Enable Traces On Dut | ${dut1} +| | ${flow_index} = | And Vpp Create Ip4 Flow | ${dut1} +| | ... | ${src_ip} | ${dst_ip} | proto=TCP +| | ... | action=redirect-to-queue | value=${${rxq}-1} +| | And Vpp Flow Enable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index} +| | Then Send flow packet and verify action +| | ... | ${tg} | ${TG_pf1}[0] | ${DUT1_${int}1_mac}[0] +| | ... | flow_type=IP4 | proto=TCP +| | ... | src_ip=${src_ip} | dst_ip=${dst_ip} +| | ... | action=redirect-to-queue | action_value=${${rxq}-1} +| | And Vpp Flow Disable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index} +| | And Vpp Flow Del | ${dut1} | ${flow_index} +| | +| | Clear Packet Trace On Dut | ${dut1} +| | Vpp Enable Traces On Dut | ${dut1} +| | ${flow_index} = | And Vpp Create Ip4 Flow | ${dut1} +| | ... | ${src_ip} | ${dst_ip} | proto=TCP +| | ... | action=drop +| | And Vpp Flow Enable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index} +| | Then Send flow packet and verify action +| | ... | ${tg} | ${TG_pf1}[0] | ${DUT1_${int}1_mac}[0] +| | ... | flow_type=IP4 | proto=TCP +| | ... | src_ip=${src_ip} | dst_ip=${dst_ip} +| | ... | action=drop +| | And Vpp Flow Disable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index} +| | And Vpp Flow Del | ${dut1} | ${flow_index} +| | +| | Clear Packet Trace On Dut | ${dut1} +| | Vpp Enable Traces On Dut | ${dut1} +| | ${flow_index} = | And Vpp Create Ip4 Flow | ${dut1} +| | ... | ${src_ip} | ${dst_ip} | proto=TCP +| | ... | action=mark | value=${7} +| | And Vpp Flow Enable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index} +| | Then Send flow packet and verify action +| | ... | ${tg} | ${TG_pf1}[0] | ${DUT1_${int}1_mac}[0] +| | ... | flow_type=IP4 | proto=TCP +| | ... | src_ip=${src_ip} | dst_ip=${dst_ip} +| | ... | action=mark +| | And Vpp Flow Disable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index} +| | And Vpp Flow Del | ${dut1} | ${flow_index} + +*** Test Cases *** +| 64B-0c-ethip4-flow-ip4-tcp-scapy +| | [Tags] | 64B | 0C +| | frame_size=${64} | phy_cores=${0} diff --git a/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-udp-scapy.robot b/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-udp-scapy.robot new file mode 100644 index 0000000000..47f625cc02 --- /dev/null +++ b/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-udp-scapy.robot @@ -0,0 +1,119 @@ +# Copyright (c) 2021 Intel and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY +| ... | NIC_Intel-X710 | ETH | IP4FWD | FLOW | UDP | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4-flow-ip4-udp +| +| Suite Setup | Setup suite topology interfaces | scapy +| Test Setup | Setup test +| Test Teardown | Tear down test | packet_trace | telemetry +| +| Test Template | Local Template +| +| Documentation | *IP4 flow test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1 2-node topology with one link\ +| ... | between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IP4-UDP. +| ... | *[Cfg] DUT configuration:* DUT is configured with IP4 flow. +| ... | *[Ver] TG verification:* Verify if the flow action is correct. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${overhead}= | ${0} +| ${src_ip}= | 1.1.1.1 +| ${dst_ip}= | 2.2.2.2 +| ${rxq}= | ${4} +# Telemetry +| ${telemetry_profile}= | vpp_test_teardown + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Ver] Make TG send IP4 packet routed over DUT1 interfaces.\ +| | ... | Make VPP verify flow packet is correct. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer. Type: integer +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${rxq} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs | with_trace=${True} +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | +| | Clear Packet Trace On Dut | ${dut1} +| | Vpp Enable Traces On Dut | ${dut1} +| | ${flow_index} = | And Vpp Create Ip4 Flow | ${dut1} +| | ... | ${src_ip} | ${dst_ip} | proto=UDP +| | ... | action=redirect-to-queue | value=${${rxq}-1} +| | And Vpp Flow Enable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index} +| | Then Send flow packet and verify action +| | ... | ${tg} | ${TG_pf1}[0] | ${DUT1_${int}1_mac}[0] +| | ... | flow_type=IP4 | proto=UDP +| | ... | src_ip=${src_ip} | dst_ip=${dst_ip} +| | ... | action=redirect-to-queue | action_value=${${rxq}-1} +| | And Vpp Flow Disable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index} +| | And Vpp Flow Del | ${dut1} | ${flow_index} +| | +| | Clear Packet Trace On Dut | ${dut1} +| | Vpp Enable Traces On Dut | ${dut1} +| | ${flow_index} = | And Vpp Create Ip4 Flow | ${dut1} +| | ... | ${src_ip} | ${dst_ip} | proto=UDP +| | ... | action=drop +| | And Vpp Flow Enable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index} +| | Then Send flow packet and verify action +| | ... | ${tg} | ${TG_pf1}[0] | ${DUT1_${int}1_mac}[0] +| | ... | flow_type=IP4 | proto=UDP +| | ... | src_ip=${src_ip} | dst_ip=${dst_ip} +| | ... | action=drop +| | And Vpp Flow Disable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index} +| | And Vpp Flow Del | ${dut1} | ${flow_index} +| | +| | Clear Packet Trace On Dut | ${dut1} +| | Vpp Enable Traces On Dut | ${dut1} +| | ${flow_index} = | And Vpp Create Ip4 Flow | ${dut1} +| | ... | ${src_ip} | ${dst_ip} | proto=UDP +| | ... | action=mark | value=${7} +| | And Vpp Flow Enable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index} +| | Then Send flow packet and verify action +| | ... | ${tg} | ${TG_pf1}[0] | ${DUT1_${int}1_mac}[0] +| | ... | flow_type=IP4 | proto=UDP +| | ... | src_ip=${src_ip} | dst_ip=${dst_ip} +| | ... | action=mark +| | And Vpp Flow Disable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index} +| | And Vpp Flow Del | ${dut1} | ${flow_index} + +*** Test Cases *** +| 64B-0c-ethip4-flow-ip4-udp-scapy +| | [Tags] | 64B | 0C +| | frame_size=${64} | phy_cores=${0} diff --git a/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip6-flow-ip6-ntuple-tcp-scapy.robot b/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip6-flow-ip6-ntuple-tcp-scapy.robot new file mode 100644 index 0000000000..4c4e862461 --- /dev/null +++ b/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip6-flow-ip6-ntuple-tcp-scapy.robot @@ -0,0 +1,124 @@ +# Copyright (c) 2021 Intel and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY +| ... | NIC_Intel-X710 | ETH | IP6FWD | FLOW | NTUPLE | TCP | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip6-flow-ip6-ntuple-tcp +| +| Suite Setup | Setup suite topology interfaces | scapy +| Test Setup | Setup test +| Test Teardown | Tear down test | packet_trace | telemetry +| +| Test Template | Local Template +| +| Documentation | *IP6_N_TUPLE flow test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1 2-node topology with one link\ +| ... | between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IP6-TCP. +| ... | *[Cfg] DUT configuration:* DUT is configured with IP6_N_TUPLE flow. +| ... | *[Ver] TG verification:* Verify if the flow action is correct. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${overhead}= | ${0} +| ${src_ip}= | 2001:0db8:3c4d:0015:0000:0000:1a2f:1a2b +| ${dst_ip}= | 1011:2022:3033:4044:5055:6066:7077:8088 +| ${src_port}= | ${100} +| ${dst_port}= | ${200} +| ${rxq}= | ${4} +# Telemetry +| ${telemetry_profile}= | vpp_test_teardown + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Ver] Make TG send IP6 packet routed over DUT1 interfaces.\ +| | ... | Make VPP verify flow packet is correct. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer. Type: integer +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${rxq} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs | with_trace=${True} +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | +| | Clear Packet Trace On Dut | ${dut1} +| | Vpp Enable Traces On Dut | ${dut1} +| | ${flow_index} = | And Vpp Create Ip6 N Tuple Flow | ${dut1} +| | ... | ${src_ip} | ${dst_ip} | ${src_port} | ${dst_port} +| | ... | proto=TCP | action=redirect-to-queue | value=${${rxq}-1} +| | And Vpp Flow Enable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index} +| | Then Send flow packet and verify action +| | ... | ${tg} | ${TG_pf1}[0] | ${DUT1_${int}1_mac}[0] +| | ... | flow_type=IP6 | proto=TCP +| | ... | src_ip=${src_ip} | dst_ip=${dst_ip} +| | ... | src_port=${src_port} | dst_port=${dst_port} +| | ... | action=redirect-to-queue | action_value=${${rxq}-1} +| | And Vpp Flow Disable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index} +| | And Vpp Flow Del | ${dut1} | ${flow_index} +| | +| | Clear Packet Trace On Dut | ${dut1} +| | Vpp Enable Traces On Dut | ${dut1} +| | ${flow_index} = | And Vpp Create Ip6 N Tuple Flow | ${dut1} +| | ... | ${src_ip} | ${dst_ip} | ${src_port} | ${dst_port} +| | ... | proto=TCP | action=drop +| | And Vpp Flow Enable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index} +| | Then Send flow packet and verify action +| | ... | ${tg} | ${TG_pf1}[0] | ${DUT1_${int}1_mac}[0] +| | ... | flow_type=IP6 | proto=TCP +| | ... | src_ip=${src_ip} | dst_ip=${dst_ip} +| | ... | src_port=${src_port} | dst_port=${dst_port} +| | ... | action=drop +| | And Vpp Flow Disable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index} +| | And Vpp Flow Del | ${dut1} | ${flow_index} +| | +| | Clear Packet Trace On Dut | ${dut1} +| | Vpp Enable Traces On Dut | ${dut1} +| | ${flow_index} = | And Vpp Create Ip6 N Tuple Flow | ${dut1} +| | ... | ${src_ip} | ${dst_ip} | ${src_port} | ${dst_port} +| | ... | proto=TCP | action=mark | value=${7} +| | And Vpp Flow Enable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index} +| | Then Send flow packet and verify action +| | ... | ${tg} | ${TG_pf1}[0] | ${DUT1_${int}1_mac}[0] +| | ... | flow_type=IP6 | proto=TCP +| | ... | src_ip=${src_ip} | dst_ip=${dst_ip} +| | ... | src_port=${src_port} | dst_port=${dst_port} +| | ... | action=mark +| | And Vpp Flow Disable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index} +| | And Vpp Flow Del | ${dut1} | ${flow_index} + +*** Test Cases *** +| 64B-0c-ethip6-flow-ip6-ntuple-tcp-scapy +| | [Tags] | 64B | 0C +| | frame_size=${64} | phy_cores=${0} diff --git a/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip6-flow-ip6-ntuple-udp-scapy.robot b/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip6-flow-ip6-ntuple-udp-scapy.robot new file mode 100644 index 0000000000..8f27b4cf83 --- /dev/null +++ b/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip6-flow-ip6-ntuple-udp-scapy.robot @@ -0,0 +1,124 @@ +# Copyright (c) 2021 Intel and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY +| ... | NIC_Intel-X710 | ETH | IP6FWD | FLOW | NTUPLE | UDP | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip6-flow-ip6-ntuple-udp +| +| Suite Setup | Setup suite topology interfaces | scapy +| Test Setup | Setup test +| Test Teardown | Tear down test | packet_trace | telemetry +| +| Test Template | Local Template +| +| Documentation | *IP6_N_TUPLE flow test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1 2-node topology with one link\ +| ... | between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IP6-UDP. +| ... | *[Cfg] DUT configuration:* DUT is configured with IP6_N_TUPLE flow. +| ... | *[Ver] TG verification:* Verify if the flow action is correct. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${overhead}= | ${0} +| ${src_ip}= | 2001:0db8:3c4d:0015:0000:0000:1a2f:1a2b +| ${dst_ip}= | 1011:2022:3033:4044:5055:6066:7077:8088 +| ${src_port}= | ${100} +| ${dst_port}= | ${200} +| ${rxq}= | ${4} +# Telemetry +| ${telemetry_profile}= | vpp_test_teardown + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Ver] Make TG send IP6 packet routed over DUT1 interfaces.\ +| | ... | Make VPP verify flow packet is correct. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer. Type: integer +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${rxq} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs | with_trace=${True} +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | +| | Clear Packet Trace On Dut | ${dut1} +| | Vpp Enable Traces On Dut | ${dut1} +| | ${flow_index} = | And Vpp Create Ip6 N Tuple Flow | ${dut1} +| | ... | ${src_ip} | ${dst_ip} | ${src_port} | ${dst_port} +| | ... | proto=UDP | action=redirect-to-queue | value=${${rxq}-1} +| | And Vpp Flow Enable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index} +| | Then Send flow packet and verify action +| | ... | ${tg} | ${TG_pf1}[0] | ${DUT1_${int}1_mac}[0] +| | ... | flow_type=IP6 | proto=UDP +| | ... | src_ip=${src_ip} | dst_ip=${dst_ip} +| | ... | src_port=${src_port} | dst_port=${dst_port} +| | ... | action=redirect-to-queue | action_value=${${rxq}-1} +| | And Vpp Flow Disable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index} +| | And Vpp Flow Del | ${dut1} | ${flow_index} +| | +| | Clear Packet Trace On Dut | ${dut1} +| | Vpp Enable Traces On Dut | ${dut1} +| | ${flow_index} = | And Vpp Create Ip6 N Tuple Flow | ${dut1} +| | ... | ${src_ip} | ${dst_ip} | ${src_port} | ${dst_port} +| | ... | proto=UDP | action=drop +| | And Vpp Flow Enable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index} +| | Then Send flow packet and verify action +| | ... | ${tg} | ${TG_pf1}[0] | ${DUT1_${int}1_mac}[0] +| | ... | flow_type=IP6 | proto=UDP +| | ... | src_ip=${src_ip} | dst_ip=${dst_ip} +| | ... | src_port=${src_port} | dst_port=${dst_port} +| | ... | action=drop +| | And Vpp Flow Disable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index} +| | And Vpp Flow Del | ${dut1} | ${flow_index} +| | +| | Clear Packet Trace On Dut | ${dut1} +| | Vpp Enable Traces On Dut | ${dut1} +| | ${flow_index} = | And Vpp Create Ip6 N Tuple Flow | ${dut1} +| | ... | ${src_ip} | ${dst_ip} | ${src_port} | ${dst_port} +| | ... | proto=UDP | action=mark | value=${7} +| | And Vpp Flow Enable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index} +| | Then Send flow packet and verify action +| | ... | ${tg} | ${TG_pf1}[0] | ${DUT1_${int}1_mac}[0] +| | ... | flow_type=IP6 | proto=UDP +| | ... | src_ip=${src_ip} | dst_ip=${dst_ip} +| | ... | src_port=${src_port} | dst_port=${dst_port} +| | ... | action=mark +| | And Vpp Flow Disable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index} +| | And Vpp Flow Del | ${dut1} | ${flow_index} + +*** Test Cases *** +| 64B-0c-ethip6-flow-ip6-ntuple-udp-scapy +| | [Tags] | 64B | 0C +| | frame_size=${64} | phy_cores=${0} diff --git a/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip6-flow-ip6-tcp-scapy.robot b/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip6-flow-ip6-tcp-scapy.robot new file mode 100644 index 0000000000..9e50a278e7 --- /dev/null +++ b/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip6-flow-ip6-tcp-scapy.robot @@ -0,0 +1,119 @@ +# Copyright (c) 2021 Intel and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY +| ... | NIC_Intel-X710 | ETH | IP6FWD | FLOW | TCP | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip6-flow-ip6-tcp +| +| Suite Setup | Setup suite topology interfaces | scapy +| Test Setup | Setup test +| Test Teardown | Tear down test | packet_trace | telemetry +| +| Test Template | Local Template +| +| Documentation | *IP6 flow test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1 2-node topology with one link\ +| ... | between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IP6-TCP. +| ... | *[Cfg] DUT configuration:* DUT is configured with IP6 flow. +| ... | *[Ver] TG verification:* Verify if the flow action is correct. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${overhead}= | ${0} +| ${src_ip}= | 2001:0db8:3c4d:0015:0000:0000:1a2f:1a2b +| ${dst_ip}= | 1011:2022:3033:4044:5055:6066:7077:8088 +| ${rxq}= | ${4} +# Telemetry +| ${telemetry_profile}= | vpp_test_teardown + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Ver] Make TG send IP6 packet routed over DUT1 interfaces.\ +| | ... | Make VPP verify flow packet is correct. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer. Type: integer +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${rxq} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs | with_trace=${True} +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | +| | Clear Packet Trace On Dut | ${dut1} +| | Vpp Enable Traces On Dut | ${dut1} +| | ${flow_index} = | And Vpp Create Ip6 Flow | ${dut1} +| | ... | ${src_ip} | ${dst_ip} | proto=TCP +| | ... | action=redirect-to-queue | value=${${rxq}-1} +| | And Vpp Flow Enable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index} +| | Then Send flow packet and verify action +| | ... | ${tg} | ${TG_pf1}[0] | ${DUT1_${int}1_mac}[0] +| | ... | flow_type=IP6 | proto=TCP +| | ... | src_ip=${src_ip} | dst_ip=${dst_ip} +| | ... | action=redirect-to-queue | action_value=${${rxq}-1} +| | And Vpp Flow Disable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index} +| | And Vpp Flow Del | ${dut1} | ${flow_index} +| | +| | Clear Packet Trace On Dut | ${dut1} +| | Vpp Enable Traces On Dut | ${dut1} +| | ${flow_index} = | And Vpp Create Ip6 Flow | ${dut1} +| | ... | ${src_ip} | ${dst_ip} | proto=TCP +| | ... | action=drop +| | And Vpp Flow Enable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index} +| | Then Send flow packet and verify action +| | ... | ${tg} | ${TG_pf1}[0] | ${DUT1_${int}1_mac}[0] +| | ... | flow_type=IP6 | proto=TCP +| | ... | src_ip=${src_ip} | dst_ip=${dst_ip} +| | ... | action=drop +| | And Vpp Flow Disable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index} +| | And Vpp Flow Del | ${dut1} | ${flow_index} +| | +| | Clear Packet Trace On Dut | ${dut1} +| | Vpp Enable Traces On Dut | ${dut1} +| | ${flow_index} = | And Vpp Create Ip6 Flow | ${dut1} +| | ... | ${src_ip} | ${dst_ip} | proto=TCP +| | ... | action=mark | value=${7} +| | And Vpp Flow Enable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index} +| | Then Send flow packet and verify action +| | ... | ${tg} | ${TG_pf1}[0] | ${DUT1_${int}1_mac}[0] +| | ... | flow_type=IP6 | proto=TCP +| | ... | src_ip=${src_ip} | dst_ip=${dst_ip} +| | ... | action=mark +| | And Vpp Flow Disable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index} +| | And Vpp Flow Del | ${dut1} | ${flow_index} + +*** Test Cases *** +| 64B-0c-ethip6-flow-ip6-tcp-scapy +| | [Tags] | 64B | 0C +| | frame_size=${64} | phy_cores=${0} diff --git a/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip6-flow-ip6-udp-scapy.robot b/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip6-flow-ip6-udp-scapy.robot new file mode 100644 index 0000000000..996a631713 --- /dev/null +++ b/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip6-flow-ip6-udp-scapy.robot @@ -0,0 +1,119 @@ +# Copyright (c) 2021 Intel and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY +| ... | NIC_Intel-X710 | ETH | IP6FWD | FLOW | UDP | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip6-flow-ip6-udp +| +| Suite Setup | Setup suite topology interfaces | scapy +| Test Setup | Setup test +| Test Teardown | Tear down test | packet_trace | telemetry +| +| Test Template | Local Template +| +| Documentation | *IP6 flow test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1 2-node topology with one link\ +| ... | between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IP6-UDP. +| ... | *[Cfg] DUT configuration:* DUT is configured with IP6 flow. +| ... | *[Ver] TG verification:* Verify if the flow action is correct. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${overhead}= | ${0} +| ${src_ip}= | 2001:0db8:3c4d:0015:0000:0000:1a2f:1a2b +| ${dst_ip}= | 1011:2022:3033:4044:5055:6066:7077:8088 +| ${rxq}= | ${4} +# Telemetry +| ${telemetry_profile}= | vpp_test_teardown + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Ver] Make TG send IP6 packet routed over DUT1 interfaces.\ +| | ... | Make VPP verify flow packet is correct. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer. Type: integer +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${rxq} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs | with_trace=${True} +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | +| | Clear Packet Trace On Dut | ${dut1} +| | Vpp Enable Traces On Dut | ${dut1} +| | ${flow_index} = | And Vpp Create Ip6 Flow | ${dut1} +| | ... | ${src_ip} | ${dst_ip} | proto=UDP +| | ... | action=redirect-to-queue | value=${${rxq}-1} +| | And Vpp Flow Enable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index} +| | Then Send flow packet and verify action +| | ... | ${tg} | ${TG_pf1}[0] | ${DUT1_${int}1_mac}[0] +| | ... | flow_type=IP6 | proto=UDP +| | ... | src_ip=${src_ip} | dst_ip=${dst_ip} +| | ... | action=redirect-to-queue | action_value=${${rxq}-1} +| | And Vpp Flow Disable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index} +| | And Vpp Flow Del | ${dut1} | ${flow_index} +| | +| | Clear Packet Trace On Dut | ${dut1} +| | Vpp Enable Traces On Dut | ${dut1} +| | ${flow_index} = | And Vpp Create Ip6 Flow | ${dut1} +| | ... | ${src_ip} | ${dst_ip} | proto=UDP +| | ... | action=drop +| | And Vpp Flow Enable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index} +| | Then Send flow packet and verify action +| | ... | ${tg} | ${TG_pf1}[0] | ${DUT1_${int}1_mac}[0] +| | ... | flow_type=IP6 | proto=UDP +| | ... | src_ip=${src_ip} | dst_ip=${dst_ip} +| | ... | action=drop +| | And Vpp Flow Disable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index} +| | And Vpp Flow Del | ${dut1} | ${flow_index} +| | +| | Clear Packet Trace On Dut | ${dut1} +| | Vpp Enable Traces On Dut | ${dut1} +| | ${flow_index} = | And Vpp Create Ip6 Flow | ${dut1} +| | ... | ${src_ip} | ${dst_ip} | proto=UDP +| | ... | action=mark | value=${7} +| | And Vpp Flow Enable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index} +| | Then Send flow packet and verify action +| | ... | ${tg} | ${TG_pf1}[0] | ${DUT1_${int}1_mac}[0] +| | ... | flow_type=IP6 | proto=UDP +| | ... | src_ip=${src_ip} | dst_ip=${dst_ip} +| | ... | action=mark +| | And Vpp Flow Disable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index} +| | And Vpp Flow Del | ${dut1} | ${flow_index} + +*** Test Cases *** +| 64B-0c-ethip6-flow-ip6-udp-scapy +| | [Tags] | 64B | 0C +| | frame_size=${64} | phy_cores=${0} diff --git a/tests/vpp/device/flow/regenerate_testcases.py b/tests/vpp/device/flow/regenerate_testcases.py new file mode 100755 index 0000000000..87521e662d --- /dev/null +++ b/tests/vpp/device/flow/regenerate_testcases.py @@ -0,0 +1,18 @@ +#!/usr/bin/env python3 + +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +from resources.libraries.python.autogen.Regenerator import Regenerator + +Regenerator().regenerate_glob(u"*.robot") |