diff options
Diffstat (limited to 'tests')
| -rw-r--r-- | tests/suites/cop/cop_whitelist_blacklist.robot | 105 | ||||
| -rw-r--r-- | tests/suites/cop/cop_whitelist_blacklist_IPv6.robot | 120 |
2 files changed, 225 insertions, 0 deletions
diff --git a/tests/suites/cop/cop_whitelist_blacklist.robot b/tests/suites/cop/cop_whitelist_blacklist.robot new file mode 100644 index 0000000000..ad02b4c499 --- /dev/null +++ b/tests/suites/cop/cop_whitelist_blacklist.robot @@ -0,0 +1,105 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Library | resources.libraries.python.topology.Topology +| Library | resources.libraries.python.NodePath +| Library | resources.libraries.python.Trace +| Resource | resources/libraries/robot/default.robot +| Resource | resources/libraries/robot/interfaces.robot +| Resource | resources/libraries/robot/ipv4.robot +| Resource | resources/libraries/robot/traffic.robot +| Resource | resources/libraries/robot/cop.robot +| Resource | resources/libraries/robot/l2_xconnect.robot +| Variables | resources/libraries/python/IPv4NodeAddress.py | ${nodes} +| Force Tags | HW_ENV | VM_ENV | 3_NODE_SINGLE_LINK_TOPO +| Suite Setup | Run Keywords | Setup all DUTs before test +| ... | AND | Setup all TGs before traffic script +| ... | AND | Update All Interface Data On All Nodes | ${nodes} +| Test Setup | Clear interface counters on all vpp nodes in topology | ${nodes} +| Test Teardown | Show packet trace on all DUTs | ${nodes} +| Documentation | *COP Blacklist and Whitelist Tests* +| ... +| ... | Test suite uses 3-node topology TG - DUT1 - DUT2 - TG +| ... | with one link between nodes where DUT2 has xconnect. +| ... | Test packets are sent only in one direction with COP set either as +| ... | whitelist or blacklist. Subsequently, packet's IP src/dst and +| ... | MAC addresses are checked. + +*** Variables *** +| ${tg_node}= | ${nodes['TG']} +| ${dut1_node}= | ${nodes['DUT1']} +| ${dut2_node}= | ${nodes['DUT2']} + +| ${dut1_if1_ip}= | 192.168.1.1 +| ${dut1_if2_ip}= | 192.168.2.1 +| ${dut1_if1_ip_GW}= | 192.168.1.2 +| ${dut1_if2_ip_GW}= | 192.168.2.2 + +| ${test_dst_ip}= | 32.0.0.1 +| ${test_src_ip}= | 16.0.0.1 + +| ${cop_dut_ip}= | 16.0.0.0 + +| ${ip_prefix}= | 24 +| ${nodes_ipv4_addresses}= | ${nodes_ipv4_addr} + +| ${fib_table_number}= | 1 + +*** Test Cases *** +| VPP permits packets based on IPv4 src addr +| | [Documentation] | COP Whitelist test with basic setup. +| | Given Setup Nodes And Variables | ${tg_node} | ${dut1_node} | ${dut2_node} +| | And L2 setup xconnect on DUT | ${dut2_node} | ${dut2_if1} | ${dut2_if2} +| | And Set Interface Address +| | ... | ${dut1_node} | ${dut1_if1} | ${dut1_if1_ip} | ${ip_prefix} +| | And Set Interface Address +| | ... | ${dut1_node} | ${dut1_if2} | ${dut1_if2_ip} | ${ip_prefix} +| | And Add Arp On Dut +| | ... | ${dut1_node} | ${dut1_if1} | ${dut1_if1_ip_GW} | ${tg_if1_mac} +| | And Add Arp On Dut +| | ... | ${dut1_node} | ${dut1_if2} | ${dut1_if2_ip_GW} | ${tg_if2_mac} +| | And Vpp Route Add | ${dut1_node} +| | ... | ${test_dst_ip} | ${ip_prefix} | ${dut1_if2_ip_GW} | ${dut1_if2} +| | And Add fib table | ${dut1_node} +| | ... | ${cop_dut_ip} | ${ip_prefix} | ${fib_table_number} | local +| | When COP Add whitelist Entry +| | ... | ${dut1_node} | ${dut1_if1} | ip4 | ${fib_table_number} +| | And COP interface enable or disable | ${dut1_node} | ${dut1_if1} | enable +| | Then Send Packet And Check Headers | ${tg_node} | +| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_if1} | ${tg_if1_mac} | +| | ... | ${dut1_if1_mac} | ${tg_if2} | ${dut1_if2_mac} | ${tg_if2_mac} + + +| VPP drops packets based on IPv4 src addr +| | [Documentation] | COP blacklist test with basic setup. +| | Given Setup Nodes And Variables | ${tg_node} | ${dut1_node} | ${dut2_node} +| | And L2 setup xconnect on DUT | ${dut2_node} | ${dut2_if1} | ${dut2_if2} +| | And Set Interface Address +| | ... | ${dut1_node} | ${dut1_if1} | ${dut1_if1_ip} | ${ip_prefix} +| | And Set Interface Address +| | ... | ${dut1_node} | ${dut1_if2} | ${dut1_if2_ip} | ${ip_prefix} +| | And Add Arp On Dut +| | ... | ${dut1_node} | ${dut1_if1} | ${dut1_if1_ip_GW} | ${tg_if1_mac} +| | And Add Arp On Dut +| | ... | ${dut1_node} | ${dut1_if2} | ${dut1_if2_ip_GW} | ${tg_if2_mac} +| | And Vpp Route Add | ${dut1_node} +| | ... | ${test_dst_ip} | ${ip_prefix} | ${dut1_if2_ip_GW} | ${dut1_if2} +| | And Add fib table | ${dut1_node} +| | ... | ${cop_dut_ip} | ${ip_prefix} | ${fib_table_number} | drop +| | When COP Add whitelist Entry +| | ... | ${dut1_node} | ${dut1_if1} | ip4 | ${fib_table_number} +| | And COP interface enable or disable | ${dut1_node} | ${dut1_if1} | enable +| | Then Send packet from Port to Port should failed | ${tg_node} | +| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_if1} | ${tg_if1_mac} | +| | ... | ${dut1_if1_mac} | ${tg_if2} | ${dut1_if2_mac} | ${tg_if2_mac} diff --git a/tests/suites/cop/cop_whitelist_blacklist_IPv6.robot b/tests/suites/cop/cop_whitelist_blacklist_IPv6.robot new file mode 100644 index 0000000000..a48ae01475 --- /dev/null +++ b/tests/suites/cop/cop_whitelist_blacklist_IPv6.robot @@ -0,0 +1,120 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Library | resources.libraries.python.topology.Topology +| Library | resources.libraries.python.NodePath +| Library | resources.libraries.python.Trace +| Resource | resources/libraries/robot/default.robot +| Resource | resources/libraries/robot/interfaces.robot +| Resource | resources/libraries/robot/ipv6.robot +| Resource | resources/libraries/robot/ipv4.robot +| Resource | resources/libraries/robot/traffic.robot +| Resource | resources/libraries/robot/cop.robot +| Resource | resources/libraries/robot/l2_xconnect.robot +| Variables | resources/libraries/python/IPv6NodesAddr.py | ${nodes} +| Force Tags | HW_ENV | VM_ENV | 3_NODE_SINGLE_LINK_TOPO +| Suite Setup | Run Keywords | Setup all DUTs before test +| ... | AND | Setup all TGs before traffic script +| ... | AND | Update All Interface Data On All Nodes | ${nodes} +| Test Setup | Clear interface counters on all vpp nodes in topology | ${nodes} +| Test Teardown | Show packet trace on all DUTs | ${nodes} +| Documentation | *COP Blacklist and Whitelist Tests* +| ... +| ... | Test suite uses 3-node topology TG - DUT1 - DUT2 - TG +| ... | with one link between nodes where DUT2 has xconnect. +| ... | Test packets are sent only in one direction with COP set either as +| ... | whitelist or blacklist. Subsequently, packet's IP src/dst and +| ... | MAC addresses are checked. + +*** Variables *** +| ${tg_node}= | ${nodes['TG']} +| ${dut1_node}= | ${nodes['DUT1']} +| ${dut2_node}= | ${nodes['DUT2']} + +| ${dut1_if1_ip}= | 3ffe:62::1 +| ${dut1_if2_ip}= | 3ffe:63::1 +| ${dut1_if1_ip_GW}= | 3ffe:62::2 +| ${dut1_if2_ip_GW}= | 3ffe:63::2 + +| ${dut2_if1_ip}= | 3ffe:72::1 +| ${dut2_if2_ip}= | 3ffe:73::1 + +| ${test_dst_ip}= | 3ffe:64::1 +| ${test_src_ip}= | 3ffe:61::1 + +| ${cop_dut_ip}= | 3ffe:61:: + +| ${ip_prefix}= | 64 + +| ${nodes_ipv6_addresses}= | ${nodes_ipv6_addr} + +| ${fib_table_number}= | 1 + +*** Test Cases *** +| VPP permits packets based on IPv6 src addr +| | [Documentation] | COP Whitelist test with basic setup. +| | Given Setup Nodes And Variables | ${tg_node} | ${dut1_node} | ${dut2_node} +| | And L2 setup xconnect on DUT | ${dut2_node} | ${dut2_if1} | ${dut2_if2} +| | And VPP Set IF IPv6 Addr +| | ... | ${dut1_node} | ${dut1_if1} | ${dut1_if1_ip} | ${ip_prefix} +| | And VPP Set IF IPv6 Addr +| | ... | ${dut1_node} | ${dut1_if2} | ${dut1_if2_ip} | ${ip_prefix} +| | And VPP Set IF IPv6 Addr +| | ... | ${dut2_node} | ${dut2_if1} | ${dut2_if1_ip} | ${ip_prefix} +| | And VPP Set IF IPv6 Addr +| | ... | ${dut2_node} | ${dut2_if2} | ${dut2_if2_ip} | ${ip_prefix} +| | And Add Arp On Dut +| | ... | ${dut1_node} | ${dut1_if1} | ${dut1_if1_ip_GW} | ${tg_if1_mac} +| | And Add Arp On Dut +| | ... | ${dut1_node} | ${dut1_if2} | ${dut1_if2_ip_GW} | ${tg_if2_mac} +| | And Vpp Route Add | ${dut1_node} +| | ... | ${test_dst_ip} | ${ip_prefix} | ${dut1_if2_ip_GW} | ${dut1_if2} +| | And Vpp All Ra Suppress Link Layer | ${nodes} +| | And Add fib table | ${dut1_node} | ${cop_dut_ip} | ${ip_prefix} | +| | ... | ${fib_table_number} | local +| | When COP Add whitelist Entry | ${dut1_node} | ${dut1_if1} | ip6 | +| | ... | ${fib_table_number} +| | And COP interface enable or disable | ${dut1_node} | ${dut1_if1} | enable +| | Then Send Packet And Check Headers | ${tg_node} | +| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_if1} | ${tg_if1_mac} | +| | ... | ${dut1_if1_mac} | ${tg_if2} | ${dut1_if2_mac} | ${tg_if2_mac} + + +| VPP drops packets based on IPv6 src addr +| | [Documentation] | COP blacklist test with basic setup. +| | Given Setup Nodes And Variables | ${tg_node} | ${dut1_node} | ${dut2_node} +| | And L2 setup xconnect on DUT | ${dut2_node} | ${dut2_if1} | ${dut2_if2} +| | And VPP Set IF IPv6 Addr +| | ... | ${dut1_node} | ${dut1_if1} | ${dut1_if1_ip} | ${ip_prefix} +| | And VPP Set IF IPv6 Addr +| | ... | ${dut1_node} | ${dut1_if2} | ${dut1_if2_ip} | ${ip_prefix} +| | And VPP Set IF IPv6 Addr +| | ... | ${dut2_node} | ${dut2_if1} | ${dut2_if1_ip} | ${ip_prefix} +| | And VPP Set IF IPv6 Addr +| | ... | ${dut2_node} | ${dut2_if2} | ${dut2_if2_ip} | ${ip_prefix} +| | And Add Arp On Dut +| | ... | ${dut1_node} | ${dut1_if1} | ${dut1_if1_ip_GW} | ${tg_if1_mac} +| | And Add Arp On Dut +| | ... | ${dut1_node} | ${dut1_if2} | ${dut1_if2_ip_GW} | ${tg_if2_mac} +| | And Vpp Route Add | ${dut1_node} +| | ... | ${test_dst_ip} | ${ip_prefix} | ${dut1_if2_ip_GW} | ${dut1_if2} +| | And Vpp All Ra Suppress Link Layer | ${nodes} +| | And Add fib table | ${dut1_node} +| | ... | ${cop_dut_ip} | ${ip_prefix} | ${fib_table_number} | drop +| | When COP Add whitelist Entry +| | ... | ${dut1_node} | ${dut1_if1} | ip6 | ${fib_table_number} +| | And COP interface enable or disable | ${dut1_node} | ${dut1_if1} | enable +| | Then Send packet from Port to Port should failed | ${tg_node} | +| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_if1} | ${tg_if1_mac} | +| | ... | ${dut1_if1_mac} | ${tg_if2} | ${dut1_if2_mac} | ${tg_if2_mac} |