diff options
Diffstat (limited to 'tests')
8 files changed, 0 insertions, 1364 deletions
diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot deleted file mode 100644 index cc579bc215..0000000000 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot +++ /dev/null @@ -1,169 +0,0 @@ -# Copyright (c) 2023 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | SCALE | NDRPDR -| ... | IP4FWD | IPSEC | IPSECHW | IPSECINT | NIC_Intel-X710 | TNL_1000 -| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec1000tnlhw-ip4base-int-aes128cbc-hmac512sha -| -| Suite Setup | Setup suite topology interfaces | performance | cryptohw -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | ipsec_sa -| -| Test Template | Local Template -| -| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** -| ... | -| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ -| ... | topology with single links between nodes. -| ... | -| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ -| ... | Eth-IPv4-IPSec on DUT1-DUT2. -| ... | -| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ -| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ -| ... | encrypt it and send to another DUT, where packets are decrypted and \ -| ... | sent back to TG. -| ... | -| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ -| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ -| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ -| ... | expressed in percentage of packets transmitted. NDR and PDR are \ -| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ -| ... | library. -| ... | Test packets are generated by TG on \ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ -| ... | (flow-group per direction, number of flows per flow-group equals to \ -| ... | number of IPSec tunnels) with all packets \ -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ -| ... | static payload. MAC addresses are matching MAC addresses of the TG \ -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ -| ... | is applied to both streams. -| ... | -| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so -| ... | crypto_native_plugin.so -| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so -| ${crypto_type}= | HW_DH895xcc -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${78} -| ${tg_if1_ip4}= | 192.168.10.254 -| ${dut1_if1_ip4}= | 192.168.10.11 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.102 -| ${dut2_if2_ip4}= | 192.168.20.11 -| ${tg_if2_ip4}= | 192.168.20.254 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${24} -| ${n_tunnels}= | ${1000} -# Traffic profile: -| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \ -| | ... | config. Each DUT uses ${phy_cores} physical core(s) for worker \ -| | ... | threads. -| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA 512 256 -| | -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| 64B-1c-ethip4ipsec1000tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| 64B-2c-ethip4ipsec1000tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| 64B-4c-ethip4ipsec1000tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| 1518B-1c-ethip4ipsec1000tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-ethip4ipsec1000tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-ethip4ipsec1000tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-ethip4ipsec1000tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-ethip4ipsec1000tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-ethip4ipsec1000tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-ethip4ipsec1000tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-ethip4ipsec1000tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-ethip4ipsec1000tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-int-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-int-aes128gcm-ndrpdr.robot deleted file mode 100644 index ae2968e118..0000000000 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-int-aes128gcm-ndrpdr.robot +++ /dev/null @@ -1,171 +0,0 @@ -# Copyright (c) 2023 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | SCALE | NDRPDR -| ... | IP4FWD | IPSEC | IPSECHW | IPSECINT | NIC_Intel-X710 | TNL_1000 -| ... | AES_128_GCM | AES | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec1000tnlhw-ip4base-int-aes128gcm -| -| Suite Setup | Setup suite topology interfaces | performance | cryptohw -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | ipsec_sa -| -| Test Template | Local Template -| -| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** -| ... | -| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ -| ... | topology with single links between nodes. -| ... | -| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ -| ... | Eth-IPv4-IPSec on DUT1-DUT2. -| ... | -| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ -| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ -| ... | encrypt it and send to another DUT, where packets are decrypted and \ -| ... | sent back to TG. -| ... | -| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ -| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ -| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ -| ... | expressed in percentage of packets transmitted. NDR and PDR are \ -| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ -| ... | library. -| ... | Test packets are generated by TG on \ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ -| ... | (flow-group per direction, number of flows per flow-group equals to \ -| ... | number of IPSec tunnels) with all packets \ -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ -| ... | static payload. MAC addresses are matching MAC addresses of the TG \ -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ -| ... | is applied to both streams. -| ... | -| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so -| ... | crypto_native_plugin.so -| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so -| ${crypto_type}= | HW_DH895xcc -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${54} -| ${tg_if1_ip4}= | 192.168.10.254 -| ${dut1_if1_ip4}= | 192.168.10.11 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.102 -| ${dut2_if2_ip4}= | 192.168.20.11 -| ${tg_if2_ip4}= | 192.168.20.254 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${24} -| ${n_tunnels}= | ${1000} -# Traffic profile: -| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES GCM 128 -| | ${auth_alg}= | Set Variable | ${NONE} -| | ${ipsec_proto}= | IPsec Proto ESP -| | -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | And VPP IPsec Select Backend | ${dut1} | ${ipsec_proto} | index=${1} -| | And VPP IPsec Select Backend | ${dut2} | ${ipsec_proto} | index=${1} -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| 64B-1c-ethip4ipsec1000tnlhw-ip4base-int-aes128gcm-ndrpdr -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| 64B-2c-ethip4ipsec1000tnlhw-ip4base-int-aes128gcm-ndrpdr -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| 64B-4c-ethip4ipsec1000tnlhw-ip4base-int-aes128gcm-ndrpdr -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| 1518B-1c-ethip4ipsec1000tnlhw-ip4base-int-aes128gcm-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-ethip4ipsec1000tnlhw-ip4base-int-aes128gcm-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-ethip4ipsec1000tnlhw-ip4base-int-aes128gcm-ndrpdr -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-ethip4ipsec1000tnlhw-ip4base-int-aes128gcm-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-ethip4ipsec1000tnlhw-ip4base-int-aes128gcm-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-ethip4ipsec1000tnlhw-ip4base-int-aes128gcm-ndrpdr -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-ethip4ipsec1000tnlhw-ip4base-int-aes128gcm-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-ethip4ipsec1000tnlhw-ip4base-int-aes128gcm-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-ethip4ipsec1000tnlhw-ip4base-int-aes128gcm-ndrpdr -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-int-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-int-aes256gcm-ndrpdr.robot deleted file mode 100644 index c00c16abf0..0000000000 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-int-aes256gcm-ndrpdr.robot +++ /dev/null @@ -1,171 +0,0 @@ -# Copyright (c) 2023 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | SCALE | NDRPDR -| ... | IP4FWD | IPSEC | IPSECHW | IPSECINT | NIC_Intel-X710 | TNL_1000 -| ... | AES_256_GCM | AES | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec1000tnlhw-ip4base-int-aes256gcm -| -| Suite Setup | Setup suite topology interfaces | performance | cryptohw -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | ipsec_sa -| -| Test Template | Local Template -| -| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** -| ... | -| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ -| ... | topology with single links between nodes. -| ... | -| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ -| ... | Eth-IPv4-IPSec on DUT1-DUT2. -| ... | -| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ -| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ -| ... | encrypt it and send to another DUT, where packets are decrypted and \ -| ... | sent back to TG. -| ... | -| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ -| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ -| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ -| ... | expressed in percentage of packets transmitted. NDR and PDR are \ -| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ -| ... | library. -| ... | Test packets are generated by TG on \ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ -| ... | (flow-group per direction, number of flows per flow-group equals to \ -| ... | number of IPSec tunnels) with all packets \ -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ -| ... | static payload. MAC addresses are matching MAC addresses of the TG \ -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ -| ... | is applied to both streams. -| ... | -| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so -| ... | crypto_native_plugin.so -| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so -| ${crypto_type}= | HW_DH895xcc -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${54} -| ${tg_if1_ip4}= | 192.168.10.254 -| ${dut1_if1_ip4}= | 192.168.10.11 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.102 -| ${dut2_if2_ip4}= | 192.168.20.11 -| ${tg_if2_ip4}= | 192.168.20.254 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${24} -| ${n_tunnels}= | ${1000} -# Traffic profile: -| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES GCM 256 -| | ${auth_alg}= | Set Variable | ${NONE} -| | ${ipsec_proto}= | IPsec Proto ESP -| | -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | And VPP IPsec Select Backend | ${dut1} | ${ipsec_proto} | index=${1} -| | And VPP IPsec Select Backend | ${dut2} | ${ipsec_proto} | index=${1} -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| 64B-1c-ethip4ipsec1000tnlhw-ip4base-int-aes256gcm-ndrpdr -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| 64B-2c-ethip4ipsec1000tnlhw-ip4base-int-aes256gcm-ndrpdr -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| 64B-4c-ethip4ipsec1000tnlhw-ip4base-int-aes256gcm-ndrpdr -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| 1518B-1c-ethip4ipsec1000tnlhw-ip4base-int-aes256gcm-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-ethip4ipsec1000tnlhw-ip4base-int-aes256gcm-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-ethip4ipsec1000tnlhw-ip4base-int-aes256gcm-ndrpdr -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-ethip4ipsec1000tnlhw-ip4base-int-aes256gcm-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-ethip4ipsec1000tnlhw-ip4base-int-aes256gcm-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-ethip4ipsec1000tnlhw-ip4base-int-aes256gcm-ndrpdr -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-ethip4ipsec1000tnlhw-ip4base-int-aes256gcm-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-ethip4ipsec1000tnlhw-ip4base-int-aes256gcm-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-ethip4ipsec1000tnlhw-ip4base-int-aes256gcm-ndrpdr -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-policy-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-policy-aes256gcm-ndrpdr.robot deleted file mode 100644 index b8622cb62b..0000000000 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-policy-aes256gcm-ndrpdr.robot +++ /dev/null @@ -1,171 +0,0 @@ -# Copyright (c) 2023 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | SCALE | NDRPDR -| ... | IP4FWD | IPSEC | IPSECHW | IPSECTUN | NIC_Intel-X710 | TNL_1000 -| ... | AES_256_GCM | AES | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec1000tnlhw-ip4base-policy-aes256gcm -| -| Suite Setup | Setup suite topology interfaces | performance | cryptohw -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | ipsec_all -| -| Test Template | Local Template -| -| Documentation | **IPv4 IPsec tunnel mode performance test suite.** -| ... | -| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ -| ... | topology with single links between nodes. -| ... | -| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ -| ... | Eth-IPv4-IPSec on DUT1-DUT2. -| ... | -| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ -| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ -| ... | encrypt it and send to another DUT, where packets are decrypted and \ -| ... | sent back to TG. -| ... | -| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ -| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ -| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ -| ... | expressed in percentage of packets transmitted. NDR and PDR are \ -| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ -| ... | library. -| ... | Test packets are generated by TG on \ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ -| ... | (flow-group per direction, number of flows per flow-group equals to \ -| ... | number of IPSec tunnels) with all packets \ -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ -| ... | static payload. MAC addresses are matching MAC addresses of the TG \ -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ -| ... | is applied to both streams. -| ... | -| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so -| ... | crypto_native_plugin.so -| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so -| ${crypto_type}= | HW_DH895xcc -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${54} -| ${tg_if1_ip4}= | 192.168.10.254 -| ${dut1_if1_ip4}= | 192.168.10.11 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.102 -| ${dut2_if2_ip4}= | 192.168.20.11 -| ${tg_if2_ip4}= | 192.168.20.254 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${24} -| ${n_tunnels}= | ${1000} -# Traffic profile: -| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | - **[Cfg]** DUTs runs IPsec tunneling AES_256_GCM config. \ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES GCM 256 -| | ${auth_alg}= | Set Variable | ${NONE} -| | ${ipsec_proto}= | IPsec Proto ESP -| | -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | And VPP IPsec Select Backend | ${dut1} | ${ipsec_proto} | index=${1} -| | And VPP IPsec Select Backend | ${dut2} | ${ipsec_proto} | index=${1} -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Add Multiple Tunnels -| | ... | ${nodes} | ${DUT1_${int}2}[0] | ${DUT2_${int}1}[0] | ${n_tunnels} -| | ... | ${encr_alg} | ${auth_alg} | ${dut1_if2_ip4} | ${dut2_if1_ip4} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| 64B-1c-ethip4ipsec1000tnlhw-ip4base-policy-aes256gcm-ndrpdr -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| 64B-2c-ethip4ipsec1000tnlhw-ip4base-policy-aes256gcm-ndrpdr -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| 64B-4c-ethip4ipsec1000tnlhw-ip4base-policy-aes256gcm-ndrpdr -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| 1518B-1c-ethip4ipsec1000tnlhw-ip4base-policy-aes256gcm-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-ethip4ipsec1000tnlhw-ip4base-policy-aes256gcm-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-ethip4ipsec1000tnlhw-ip4base-policy-aes256gcm-ndrpdr -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-ethip4ipsec1000tnlhw-ip4base-policy-aes256gcm-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-ethip4ipsec1000tnlhw-ip4base-policy-aes256gcm-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-ethip4ipsec1000tnlhw-ip4base-policy-aes256gcm-ndrpdr -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-ethip4ipsec1000tnlhw-ip4base-policy-aes256gcm-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-ethip4ipsec1000tnlhw-ip4base-policy-aes256gcm-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-ethip4ipsec1000tnlhw-ip4base-policy-aes256gcm-ndrpdr -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot deleted file mode 100644 index 1af7008c2b..0000000000 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot +++ /dev/null @@ -1,169 +0,0 @@ -# Copyright (c) 2023 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1 -| ... | IP4FWD | IPSEC | IPSECHW | IPSECINT | NIC_Intel-X710 | BASE -| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec1tnlhw-ip4base-int-aes128cbc-hmac512sha -| -| Suite Setup | Setup suite topology interfaces | performance | cryptohw -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | ipsec_sa -| -| Test Template | Local Template -| -| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** -| ... | -| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ -| ... | topology with single links between nodes. -| ... | -| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ -| ... | Eth-IPv4-IPSec on DUT1-DUT2. -| ... | -| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ -| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ -| ... | encrypt it and send to another DUT, where packets are decrypted and \ -| ... | sent back to TG. -| ... | -| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ -| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ -| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ -| ... | expressed in percentage of packets transmitted. NDR and PDR are \ -| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ -| ... | library. -| ... | Test packets are generated by TG on \ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ -| ... | (flow-group per direction, number of flows per flow-group equals to \ -| ... | number of IPSec tunnels) with all packets \ -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ -| ... | static payload. MAC addresses are matching MAC addresses of the TG \ -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ -| ... | is applied to both streams. -| ... | -| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so -| ... | crypto_native_plugin.so -| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so -| ${crypto_type}= | HW_DH895xcc -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${78} -| ${tg_if1_ip4}= | 192.168.10.254 -| ${dut1_if1_ip4}= | 192.168.10.11 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.102 -| ${dut2_if2_ip4}= | 192.168.20.11 -| ${tg_if2_ip4}= | 192.168.20.254 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${24} -| ${n_tunnels}= | ${1} -# Traffic profile: -| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \ -| | ... | config. Each DUT uses ${phy_cores} physical core(s) for worker \ -| | ... | threads. -| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA 512 256 -| | -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| 64B-1c-ethip4ipsec1tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| 64B-2c-ethip4ipsec1tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| 64B-4c-ethip4ipsec1tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| 1518B-1c-ethip4ipsec1tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-ethip4ipsec1tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-ethip4ipsec1tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-ethip4ipsec1tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-ethip4ipsec1tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-ethip4ipsec1tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-ethip4ipsec1tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-ethip4ipsec1tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-ethip4ipsec1tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-int-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-int-aes128gcm-ndrpdr.robot deleted file mode 100644 index 20e7ce25a8..0000000000 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-int-aes128gcm-ndrpdr.robot +++ /dev/null @@ -1,171 +0,0 @@ -# Copyright (c) 2023 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1 -| ... | IP4FWD | IPSEC | IPSECHW | IPSECINT | NIC_Intel-X710 | BASE -| ... | AES_128_GCM | AES | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec1tnlhw-ip4base-int-aes128gcm -| -| Suite Setup | Setup suite topology interfaces | performance | cryptohw -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | ipsec_sa -| -| Test Template | Local Template -| -| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** -| ... | -| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ -| ... | topology with single links between nodes. -| ... | -| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ -| ... | Eth-IPv4-IPSec on DUT1-DUT2. -| ... | -| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ -| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ -| ... | encrypt it and send to another DUT, where packets are decrypted and \ -| ... | sent back to TG. -| ... | -| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ -| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ -| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ -| ... | expressed in percentage of packets transmitted. NDR and PDR are \ -| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ -| ... | library. -| ... | Test packets are generated by TG on \ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ -| ... | (flow-group per direction, number of flows per flow-group equals to \ -| ... | number of IPSec tunnels) with all packets \ -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ -| ... | static payload. MAC addresses are matching MAC addresses of the TG \ -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ -| ... | is applied to both streams. -| ... | -| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so -| ... | crypto_native_plugin.so -| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so -| ${crypto_type}= | HW_DH895xcc -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${54} -| ${tg_if1_ip4}= | 192.168.10.254 -| ${dut1_if1_ip4}= | 192.168.10.11 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.102 -| ${dut2_if2_ip4}= | 192.168.20.11 -| ${tg_if2_ip4}= | 192.168.20.254 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${24} -| ${n_tunnels}= | ${1} -# Traffic profile: -| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES GCM 128 -| | ${auth_alg}= | Set Variable | ${NONE} -| | ${ipsec_proto}= | IPsec Proto ESP -| | -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | And VPP IPsec Select Backend | ${dut1} | ${ipsec_proto} | index=${1} -| | And VPP IPsec Select Backend | ${dut2} | ${ipsec_proto} | index=${1} -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| 64B-1c-ethip4ipsec1tnlhw-ip4base-int-aes128gcm-ndrpdr -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| 64B-2c-ethip4ipsec1tnlhw-ip4base-int-aes128gcm-ndrpdr -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| 64B-4c-ethip4ipsec1tnlhw-ip4base-int-aes128gcm-ndrpdr -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| 1518B-1c-ethip4ipsec1tnlhw-ip4base-int-aes128gcm-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-ethip4ipsec1tnlhw-ip4base-int-aes128gcm-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-ethip4ipsec1tnlhw-ip4base-int-aes128gcm-ndrpdr -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-ethip4ipsec1tnlhw-ip4base-int-aes128gcm-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-ethip4ipsec1tnlhw-ip4base-int-aes128gcm-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-ethip4ipsec1tnlhw-ip4base-int-aes128gcm-ndrpdr -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-ethip4ipsec1tnlhw-ip4base-int-aes128gcm-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-ethip4ipsec1tnlhw-ip4base-int-aes128gcm-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-ethip4ipsec1tnlhw-ip4base-int-aes128gcm-ndrpdr -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-int-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-int-aes256gcm-ndrpdr.robot deleted file mode 100644 index 8e7010349a..0000000000 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-int-aes256gcm-ndrpdr.robot +++ /dev/null @@ -1,171 +0,0 @@ -# Copyright (c) 2023 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1 -| ... | IP4FWD | IPSEC | IPSECHW | IPSECINT | NIC_Intel-X710 | BASE -| ... | AES_256_GCM | AES | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec1tnlhw-ip4base-int-aes256gcm -| -| Suite Setup | Setup suite topology interfaces | performance | cryptohw -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | ipsec_sa -| -| Test Template | Local Template -| -| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** -| ... | -| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ -| ... | topology with single links between nodes. -| ... | -| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ -| ... | Eth-IPv4-IPSec on DUT1-DUT2. -| ... | -| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ -| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ -| ... | encrypt it and send to another DUT, where packets are decrypted and \ -| ... | sent back to TG. -| ... | -| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ -| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ -| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ -| ... | expressed in percentage of packets transmitted. NDR and PDR are \ -| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ -| ... | library. -| ... | Test packets are generated by TG on \ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ -| ... | (flow-group per direction, number of flows per flow-group equals to \ -| ... | number of IPSec tunnels) with all packets \ -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ -| ... | static payload. MAC addresses are matching MAC addresses of the TG \ -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ -| ... | is applied to both streams. -| ... | -| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so -| ... | crypto_native_plugin.so -| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so -| ${crypto_type}= | HW_DH895xcc -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${54} -| ${tg_if1_ip4}= | 192.168.10.254 -| ${dut1_if1_ip4}= | 192.168.10.11 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.102 -| ${dut2_if2_ip4}= | 192.168.20.11 -| ${tg_if2_ip4}= | 192.168.20.254 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${24} -| ${n_tunnels}= | ${1} -# Traffic profile: -| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES GCM 256 -| | ${auth_alg}= | Set Variable | ${NONE} -| | ${ipsec_proto}= | IPsec Proto ESP -| | -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | And VPP IPsec Select Backend | ${dut1} | ${ipsec_proto} | index=${1} -| | And VPP IPsec Select Backend | ${dut2} | ${ipsec_proto} | index=${1} -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| 64B-1c-ethip4ipsec1tnlhw-ip4base-int-aes256gcm-ndrpdr -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| 64B-2c-ethip4ipsec1tnlhw-ip4base-int-aes256gcm-ndrpdr -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| 64B-4c-ethip4ipsec1tnlhw-ip4base-int-aes256gcm-ndrpdr -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| 1518B-1c-ethip4ipsec1tnlhw-ip4base-int-aes256gcm-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-ethip4ipsec1tnlhw-ip4base-int-aes256gcm-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-ethip4ipsec1tnlhw-ip4base-int-aes256gcm-ndrpdr -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-ethip4ipsec1tnlhw-ip4base-int-aes256gcm-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-ethip4ipsec1tnlhw-ip4base-int-aes256gcm-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-ethip4ipsec1tnlhw-ip4base-int-aes256gcm-ndrpdr -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-ethip4ipsec1tnlhw-ip4base-int-aes256gcm-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-ethip4ipsec1tnlhw-ip4base-int-aes256gcm-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-ethip4ipsec1tnlhw-ip4base-int-aes256gcm-ndrpdr -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-policy-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-policy-aes256gcm-ndrpdr.robot deleted file mode 100644 index 115575b294..0000000000 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-policy-aes256gcm-ndrpdr.robot +++ /dev/null @@ -1,171 +0,0 @@ -# Copyright (c) 2023 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1 -| ... | IP4FWD | IPSEC | IPSECHW | IPSECTUN | NIC_Intel-X710 | BASE -| ... | AES_256_GCM | AES | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec1tnlhw-ip4base-policy-aes256gcm -| -| Suite Setup | Setup suite topology interfaces | performance | cryptohw -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | ipsec_all -| -| Test Template | Local Template -| -| Documentation | **IPv4 IPsec tunnel mode performance test suite.** -| ... | -| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ -| ... | topology with single links between nodes. -| ... | -| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ -| ... | Eth-IPv4-IPSec on DUT1-DUT2. -| ... | -| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ -| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ -| ... | encrypt it and send to another DUT, where packets are decrypted and \ -| ... | sent back to TG. -| ... | -| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ -| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ -| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ -| ... | expressed in percentage of packets transmitted. NDR and PDR are \ -| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ -| ... | library. -| ... | Test packets are generated by TG on \ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ -| ... | (flow-group per direction, number of flows per flow-group equals to \ -| ... | number of IPSec tunnels) with all packets \ -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ -| ... | static payload. MAC addresses are matching MAC addresses of the TG \ -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ -| ... | is applied to both streams. -| ... | -| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so -| ... | crypto_native_plugin.so -| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so -| ${crypto_type}= | HW_DH895xcc -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${54} -| ${tg_if1_ip4}= | 192.168.10.254 -| ${dut1_if1_ip4}= | 192.168.10.11 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.102 -| ${dut2_if2_ip4}= | 192.168.20.11 -| ${tg_if2_ip4}= | 192.168.20.254 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${24} -| ${n_tunnels}= | ${1} -# Traffic profile: -| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | - **[Cfg]** DUTs runs IPsec tunneling AES_256_GCM config. \ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES GCM 256 -| | ${auth_alg}= | Set Variable | ${NONE} -| | ${ipsec_proto}= | IPsec Proto ESP -| | -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | And VPP IPsec Select Backend | ${dut1} | ${ipsec_proto} | index=${1} -| | And VPP IPsec Select Backend | ${dut2} | ${ipsec_proto} | index=${1} -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Add Multiple Tunnels -| | ... | ${nodes} | ${DUT1_${int}2}[0] | ${DUT2_${int}1}[0] | ${n_tunnels} -| | ... | ${encr_alg} | ${auth_alg} | ${dut1_if2_ip4} | ${dut2_if1_ip4} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| 64B-1c-ethip4ipsec1tnlhw-ip4base-policy-aes256gcm-ndrpdr -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| 64B-2c-ethip4ipsec1tnlhw-ip4base-policy-aes256gcm-ndrpdr -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| 64B-4c-ethip4ipsec1tnlhw-ip4base-policy-aes256gcm-ndrpdr -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| 1518B-1c-ethip4ipsec1tnlhw-ip4base-policy-aes256gcm-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-ethip4ipsec1tnlhw-ip4base-policy-aes256gcm-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-ethip4ipsec1tnlhw-ip4base-policy-aes256gcm-ndrpdr -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-ethip4ipsec1tnlhw-ip4base-policy-aes256gcm-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-ethip4ipsec1tnlhw-ip4base-policy-aes256gcm-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-ethip4ipsec1tnlhw-ip4base-policy-aes256gcm-ndrpdr -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-ethip4ipsec1tnlhw-ip4base-policy-aes256gcm-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-ethip4ipsec1tnlhw-ip4base-policy-aes256gcm-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-ethip4ipsec1tnlhw-ip4base-policy-aes256gcm-ndrpdr -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} |