diff options
Diffstat (limited to 'tests')
| -rw-r--r-- | tests/func/vlan/eth2p-dot1q-l2bdbasemaclrn-eth-2vhost-1vm-func.robot | 145 |
1 files changed, 145 insertions, 0 deletions
diff --git a/tests/func/vlan/eth2p-dot1q-l2bdbasemaclrn-eth-2vhost-1vm-func.robot b/tests/func/vlan/eth2p-dot1q-l2bdbasemaclrn-eth-2vhost-1vm-func.robot new file mode 100644 index 0000000000..e2f0e3d9fd --- /dev/null +++ b/tests/func/vlan/eth2p-dot1q-l2bdbasemaclrn-eth-2vhost-1vm-func.robot @@ -0,0 +1,145 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/default.robot +| Resource | resources/libraries/robot/bridge_domain.robot +| Resource | resources/libraries/robot/testing_path.robot +| Resource | resources/libraries/robot/tagging.robot +| Resource | resources/libraries/robot/l2_traffic.robot +| Resource | resources/libraries/robot/qemu.robot +| Resource | resources/libraries/robot/double_qemu_setup.robot +| Library | resources.libraries.python.Trace +| Force Tags | 3_NODE_DOUBLE_LINK_TOPO | HW_ENV | VM_ENV | VPP_VM_ENV +| Test Setup | Func Test Setup +| Test Teardown | Run Keywords | Show Packet Trace on All DUTs | ${nodes} +| ... | AND | Show vpp trace dump on all DUTs +| ... | AND | Stop and Clear QEMU | ${dut_node} | ${vm_node} +| ... | AND | Check VPP PID in Teardown +| Documentation | *L2 bridge domain with VLAN tag over VM test cases* +| ... +| ... | *[Top] Network Topologies:* TG=DUT 2-node circular topology +| ... | with double links between nodes. +| ... | *[Enc] Packet encapsulations:* Eth-dot1q-IPv4-ICMPv4 or +| ... | Eth-dot1q-IPv6-ICMPv6 on TG=DUT and on DUT=VM. +| ... | *[Cfg] DUT configuration:* DUT is configured with two bridge domains +| ... | (L2BD) with MAC learning enabled; each one with added VLAN +| ... | sub-interface towards TG and vhost-user interface to local VM. Configure +| ... | linux bridge on VM to pass traffic between both vhost-user interfaces. +| ... | *[Ver] TG verification:* Make TG send ICMPv4/ICMPv6 Echo Req between two +| ... | of its interfaces to be switched by DUT via VM; verify packets are +| ... | switched between these TG interfaces; on receive TG verifies packets for +| ... | correctness and their IPv4 src-addr, dst-addr, MAC addresses and +| ... | VLAN tag. +| ... | *[Ref] Applicable standard specifications:* IEEE 802.1q. + +*** Variables *** +| ${bd_id1}= | 1 +| ${bd_id2}= | 2 + +| ${vlan_id1}= | 110 +| ${vlan_wrong}= | 150 + +| ${sock1}= | /tmp/sock1 +| ${sock2}= | /tmp/sock2 + +| ${ip4_1}= | 192.168.100.1 +| ${ip4_2}= | 192.168.100.2 + +| ${ip6_1}= | 3ffe:63::1 +| ${ip6_2}= | 3ffe:63::2 + +*** Test Cases *** +| TC01: eth2p-dot1q-l2bdbasemaclrn-eth-2vhost-1vm - ipv4 +| | [Documentation] +| | ... | [Top] TG=DUT. +| | ... | [Enc] Eth-dot1q-IPv4-ICMPv4 on TG=DUT and on DUT=VM. +| | ... | [Cfg] On DUT configure two L2BDs (MAC learning enabled); first L2BD +| | ... | with Dot1Q tagged interface to TG-if1 and vhost-user interface to +| | ... | local VM, second one with vhost-user interface to local VM and Dot1Q +| | ... | tagged interface towards TG-if2. Configure linux bridge on VM to pass +| | ... | traffic between both vhost-user interfaces. +| | ... | [Ver] Make TG send ICMPv4 Echo Req tagged with one Dot1q tag +| | ... | from one of its interfaces to another one via DUT and VM; verify +| | ... | that packet is received. +| | ... | [Ref] IEEE 802.1q +| | ... +| | Given Path for 2-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} +| | And Interfaces in 2-node path are up +| | ${vlan1_name} | ${vlan1_index}= | When Vlan Subinterface Created +| | ... | ${dut_node} | ${dut_to_tg_if1} | ${vlan_id1} +| | ${vlan2_name} | ${vlan2_index}= | And Vlan Subinterface Created +| | ... | ${dut_node} | ${dut_to_tg_if2} | ${vlan_id1} +| | And VPP Vhost interfaces for L2BD forwarding are setup +| | ... | ${dut_node} | ${sock1} | ${sock2} +| | And VM for Vhost L2BD forwarding is setup +| | ... | ${dut_node} | ${sock1} | ${sock2} +| | And Interface is added to bridge domain | ${dut_node} | ${vlan1_index} +| | ... | ${bd_id1} +| | And Interface is added to bridge domain | ${dut_node} | ${vhost_if1} +| | ... | ${bd_id1} +| | And Interface is added to bridge domain | ${dut_node} | ${vlan2_index} +| | ... | ${bd_id2} +| | And Interface is added to bridge domain | ${dut_node} | ${vhost_if2} +| | ... | ${bd_id2} +| | Then Send and receive ICMP Packet +| | ... | ${tg_node} | ${tg_to_dut_if1} | ${tg_to_dut_if2} | ${ip4_1} | ${ip4_2} +| | ... | encaps=Dot1q | vlan1=${vlan_id1} | encaps_rx=Dot1q +| | And Send and receive ICMP Packet +| | ... | ${tg_node} | ${tg_to_dut_if2} | ${tg_to_dut_if1} | ${ip4_2} | ${ip4_1} +| | ... | encaps=Dot1q | vlan1=${vlan_id1} | encaps_rx=Dot1q + +| TC01: eth2p-dot1q-l2bdbasemaclrn-eth-2vhost-1vm - ipv6 +| | [Documentation] +| | ... | [Top] TG=DUT. +| | ... | [Enc] Eth-dot1q-IPv6-ICMPv6 on TG=DUT and on DUT=VM. +| | ... | [Cfg] On DUT configure two L2BDs (MAC learning enabled); first L2BD +| | ... | with Dot1Q tagged interface to TG-if1 and vhost-user interface to +| | ... | local VM, second one with vhost-user interface to local VM and Dot1Q +| | ... | tagged interface towards TG-if2. Configure linux bridge on VM to pass +| | ... | traffic between both vhost-user interfaces. +| | ... | [Ver] Make TG send ICMPv6 Echo Req tagged with one Dot1q tag +| | ... | from one of its interfaces to another one via DUT and VM; verify +| | ... | that packet is received. +| | ... | [Ref] IEEE 802.1q +| | ... +| | Given Path for 2-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} +| | And Interfaces in 2-node path are up +| | ${vlan1_name} | ${vlan1_index}= | When Vlan Subinterface Created +| | ... | ${dut_node} | ${dut_to_tg_if1} | ${vlan_id1} +| | ${vlan2_name} | ${vlan2_index}= | And Vlan Subinterface Created +| | ... | ${dut_node} | ${dut_to_tg_if2} | ${vlan_id1} +| | And VPP Vhost interfaces for L2BD forwarding are setup +| | ... | ${dut_node} | ${sock1} | ${sock2} +| | And VM for Vhost L2BD forwarding is setup +| | ... | ${dut_node} | ${sock1} | ${sock2} +| | And Interface is added to bridge domain | ${dut_node} | ${vlan1_index} +| | ... | ${bd_id1} +| | And Interface is added to bridge domain | ${dut_node} | ${vhost_if1} +| | ... | ${bd_id1} +| | And Interface is added to bridge domain | ${dut_node} | ${vlan2_index} +| | ... | ${bd_id2} +| | And Interface is added to bridge domain | ${dut_node} | ${vhost_if2} +| | ... | ${bd_id2} +| | Then Send and receive ICMP Packet +| | ... | ${tg_node} | ${tg_to_dut_if1} | ${tg_to_dut_if2} | ${ip6_1} | ${ip6_2} +| | ... | encaps=Dot1q | vlan1=${vlan_id1} | encaps_rx=Dot1q +| | And Send and receive ICMP Packet +| | ... | ${tg_node} | ${tg_to_dut_if2} | ${tg_to_dut_if1} | ${ip6_2} | ${ip6_1} +| | ... | encaps=Dot1q | vlan1=${vlan_id1} | encaps_rx=Dot1q + + + + |