aboutsummaryrefslogtreecommitdiffstats
path: root/tests
diff options
context:
space:
mode:
Diffstat (limited to 'tests')
-rw-r--r--tests/vpp/perf/l2/10ge2p1x520-eth-l2xcbase-eth-2memif-1lxc-ndrpdrdisc.robot233
1 files changed, 233 insertions, 0 deletions
diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2xcbase-eth-2memif-1lxc-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2xcbase-eth-2memif-1lxc-ndrpdrdisc.robot
new file mode 100644
index 0000000000..f9cbeb4ca9
--- /dev/null
+++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2xcbase-eth-2memif-1lxc-ndrpdrdisc.robot
@@ -0,0 +1,233 @@
+# Copyright (c) 2017 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/performance/performance_setup.robot
+| ...
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC
+| ... | NIC_Intel-X520-DA2 | ETH | L2XCFWD | BASE | MEMIF | LXC
+| ...
+| Suite Setup | Run Keywords | Set up 3-node performance topology with DUT's NIC model
+| ... | L2 | Intel-X520-DA2
+| ... | AND | Create '${lxc_count}' LXC containers on all DUT nodes with '${lxc_cpu}' cpus
+| ... | AND | Install VPP on '${lxc_count}' LXC containers on all DUT nodes
+| ... | AND | Create memif VPP configuration on '${lxc_count}' LXC containers on all DUT nodes
+| ... | AND | Create startup configuration of VPP on '${lxc_count}' LXC containers on all DUT nodes
+| Suite Teardown | Tear down 3-node performance topology with LXC
+| ...
+| Test Setup | Set up performance test
+| ...
+| Test Teardown | Tear down performance discovery test | ${min_rate}pps
+| ... | ${framesize} | ${traffic_profile}
+| ...
+| Documentation | *RFC2544: Pkt throughput L2XC test cases*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect.
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross-
+| ... | connect. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel.
+| ... | LXC is connected to VPP via Memif interface. LXC is running same VPP
+| ... | version as running on DUT. LXC is limited via cgroup to use 3 cores
+| ... | allocated from pool of isolated CPUs. There are no memory contraints.
+| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop
+| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop
+| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage
+| ... | of packets transmitted. NDR and PDR are discovered for different
+| ... | Ethernet L2 frame sizes using either binary search or linear search
+| ... | algorithms with configured starting rate and final step that determines
+| ... | throughput measurement resolution. Test packets are generated by TG on
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
+| ... | (flow-group per direction, 253 flows per flow-group) with all packets
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static
+| ... | payload. MAC addresses are matching MAC addresses of the TG node
+| ... | interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC2544.
+
+*** Variables ***
+| ${avg_imix_framesize}= | ${357.833}
+# X520-DA2 bandwidth limit
+| ${s_limit} | ${10000000000}
+# Traffic profile:
+| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254
+# LXC container
+| ${lxc_base_name} | slave
+| ${lxc_count} | ${1}
+| ${lxc_cpu} | ${4}
+# CPU settings
+| ${system_cpus}= | ${1}
+| ${vpp_cpus}= | ${5}
+
+*** Keywords ***
+| L2 Cross Connect with Memif Binary Search
+| | [Arguments] | ${framesize} | ${min_rate} | ${wt} | ${rxq} | ${search_type}
+| | Set Test Variable | ${framesize}
+| | Set Test Variable | ${min_rate}
+| | ${frame_size}= | Set Variable If
+| | ... | "${framesize}" == "IMIX_v4_1" | ${avg_imix_framesize} | ${framesize}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
+| | ${binary_min}= | Set Variable | ${min_rate}
+| | ${binary_max}= | Set Variable | ${max_rate}
+| | ${threshold}= | Set Variable | ${min_rate}
+| | Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology
+| | Add PCI Devices To DUTs In 3-node Single Link Topology
+| | ${get_framesize}= | Get Frame Size | ${framesize}
+| | Run Keyword If | ${get_framesize} < ${1522} | Add No Multi Seg to all DUTs
+| | Apply startup configuration on all VPP DUTs
+| | Initialize L2 xconnect for '1' memif pairs in 3-node circular topology
+| | Run Keyword If | '${search_type}' == 'NDR'
+| | ... | Find NDR using binary search and pps
+| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile}
+| | ... | ${min_rate} | ${max_rate} | ${threshold}
+| | ... | ELSE IF | '${search_type}' == 'PDR'
+| | ... | Find PDR using binary search and pps
+| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile}
+| | ... | ${min_rate} | ${max_rate} | ${threshold}
+| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type}
+
+*** Test Cases ***
+| tc01-64B-1t1c-eth-l2xcbase-eth-2memif-1lxc-ndrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\
+| | ... | linerate, step 100kpps.
+| | ...
+| | [Tags] | 64B | 1T1C | STHREAD | NDRDISC
+| | [Template] | L2 Cross Connect with Memif Binary Search
+| | framesize=${64} | min_rate=${100000} | wt=1 | rxq=1 | search_type=NDR
+
+| tc02-64B-1t1c-eth-l2xcbase-eth-2memif-1lxc-pdrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\
+| | ... | linerate, step 100kpps, LT=0.5%.
+| | ...
+| | [Tags] | 64B | 1T1C | STHREAD | PDRDISC
+| | [Template] | L2 Cross Connect with Memif Binary Search
+| | framesize=${64} | min_rate=${100000} | wt=1 | rxq=1 | search_type=PDR
+
+| tc03-IMIX-1t1c-eth-l2xcbase-eth-2memif-1lxc-ndrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\
+| | ... | linerate, step 10kpps.
+| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
+| | ...
+| | [Tags] | IMIX | 1T1C | STHREAD | NDRDISC
+| | [Template] | L2 Cross Connect with Memif Binary Search
+| | framesize=IMIX_v4_1 | min_rate=${10000} | wt=1 | rxq=1 | search_type=NDR
+
+| tc04-IMIX-1t1c-eth-l2xcbase-eth-2memif-1lxc-pdrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\
+| | ... | linerate, step 10kpps, LT=0.5%.
+| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
+| | ...
+| | [Tags] | IMIX | 1T1C | STHREAD | PDRDISC
+| | [Template] | L2 Cross Connect with Memif Binary Search
+| | framesize=IMIX_v4_1 | min_rate=${10000} | wt=1 | rxq=1 | search_type=PDR
+
+| tc05-1518B-1t1c-eth-l2xcbase-eth-2memif-1lxc-ndrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\
+| | ... | linerate, step 10kpps.
+| | ...
+| | [Tags] | 1518B | 1T1C | STHREAD | NDRDISC
+| | [Template] | L2 Cross Connect with Memif Binary Search
+| | framesize=${1518} | min_rate=${10000} | wt=1 | rxq=1 | search_type=NDR
+
+| tc06-1518B-1t1c-eth-l2xcbase-eth-2memif-1lxc-pdrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\
+| | ... | linerate, step 10kpps, LT=0.5%.
+| | ...
+| | [Tags] | 1518B | 1T1C | STHREAD | PDRDISC
+| | [Template] | L2 Cross Connect with Memif Binary Search
+| | framesize=${1518} | min_rate=${10000} | wt=1 | rxq=1 | search_type=PDR
+
+| tc07-64B-2t2c-eth-l2xcbase-eth-2memif-1lxc-ndrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2XC switching config with 2 thread, 2 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\
+| | ... | linerate, step 100kpps.
+| | ...
+| | [Tags] | 64B | 2T2C | MTHREAD | NDRDISC
+| | [Template] | L2 Cross Connect with Memif Binary Search
+| | framesize=${64} | min_rate=${100000} | wt=2 | rxq=1 | search_type=NDR
+
+| tc08-64B-2t2c-eth-l2xcbase-eth-2memif-1lxc-pdrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2XC switching config with 2 thread, 2 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\
+| | ... | linerate, step 100kpps, LT=0.5%.
+| | ...
+| | [Tags] | 64B | 2T2C | MTHREAD | PDRDISC
+| | [Template] | L2 Cross Connect with Memif Binary Search
+| | framesize=${64} | min_rate=${100000} | wt=2 | rxq=1 | search_type=PDR
+
+| tc09-IMIX-2t2c-eth-l2xcbase-eth-2memif-1lxc-ndrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2XC switching config with 2 thread, 2 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\
+| | ... | linerate, step 10kpps.
+| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
+| | ...
+| | [Tags] | IMIX | 2T2C | MTHREAD | NDRDISC
+| | [Template] | L2 Cross Connect with Memif Binary Search
+| | framesize=IMIX_v4_1 | min_rate=${10000} | wt=2 | rxq=1 | search_type=NDR
+
+| tc10-IMIX-2t2c-eth-l2xcbase-eth-2memif-1lxc-pdrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2XC switching config with 2 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\
+| | ... | linerate, step 10kpps, LT=0.5%.
+| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
+| | ...
+| | [Tags] | IMIX | 2T2C | MTHREAD | PDRDISC
+| | [Template] | L2 Cross Connect with Memif Binary Search
+| | framesize=IMIX_v4_1 | min_rate=${10000} | wt=2 | rxq=1 | search_type=PDR
+
+| tc11-1518B-2t2c-eth-l2xcbase-eth-2memif-1lxc-ndrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2XC switching config with 2 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\
+| | ... | linerate, step 10kpps.
+| | ...
+| | [Tags] | 1518B | 2T2C | MTHREAD | NDRDISC
+| | [Template] | L2 Cross Connect with Memif Binary Search
+| | framesize=${1518} | min_rate=${10000} | wt=2 | rxq=1 | search_type=NDR
+
+| tc12-1518B-2t2c-eth-l2xcbase-eth-2memif-1lxc-pdrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2XC switching config with 2 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\
+| | ... | linerate, step 10kpps, LT=0.5%.
+| | ...
+| | [Tags] | 1518B | 2T2C | MTHREAD | PDRDISC
+| | [Template] | L2 Cross Connect with Memif Binary Search
+| | framesize=${1518} | min_rate=${10000} | wt=2 | rxq=1 | search_type=PDR \ No newline at end of file