aboutsummaryrefslogtreecommitdiffstats
path: root/tests
diff options
context:
space:
mode:
Diffstat (limited to 'tests')
-rw-r--r--tests/vpp/device/container_memif/eth2p-ethicmpv4-ip4base-eth-2memif-1dcr-dev.robot10
-rw-r--r--tests/vpp/device/container_memif/eth2p-ethicmpv4-l2bdbasemaclrn-eth-2memif-1dcr-dev.robot9
-rw-r--r--tests/vpp/device/container_memif/eth2p-ethicmpv4-l2xcbase-eth-2memif-1dcr-dev.robot10
-rw-r--r--tests/vpp/device/container_memif/eth2p-ethicmpv6-ip6base-eth-2memif-1dcr-dev.robot10
-rw-r--r--tests/vpp/device/crypto/eth2p-ethip4ipsec1tnlsw-ip4base-policy-aes-128-cbc-sha-512-256-dev.robot10
-rw-r--r--tests/vpp/device/crypto/eth2p-ethip4ipsec1tptsw-ip4base-policy-aes-128-cbc-sha-512-256-dev.robot10
-rw-r--r--tests/vpp/device/crypto/eth2p-ethip6ipsec1tnlsw-ip6base-policy-aes-128-cbc-sha-512-256-dev.robot10
-rw-r--r--tests/vpp/device/crypto/eth2p-ethip6ipsec1tptsw-ip6base-policy-aes-128-cbc-sha-512-256-dev.robot10
-rw-r--r--tests/vpp/device/interfaces/eth2p-ethicmpv4-ip4base-eth-1tap-dev.robot9
-rw-r--r--tests/vpp/device/interfaces/eth2p-ethicmpv4-ip4base-eth-1tap-namespace-dev.robot8
-rw-r--r--tests/vpp/device/interfaces/eth2p-ethicmpv4-l2bdbasemaclrn-eth-2tap-dev.robot9
-rw-r--r--tests/vpp/device/ip4/eth2p-ethicmpv4-ip4base-dev.robot10
-rw-r--r--tests/vpp/device/ip4/eth2p-ethip4-ip4base-copblklistbase-dev.robot10
-rw-r--r--tests/vpp/device/ip4/eth2p-ethip4-ip4base-copwhtlistbase-dev.robot10
-rw-r--r--tests/vpp/device/ip4/eth2p-ethip4-ip4base-iacldstbase-dev.robot10
-rw-r--r--tests/vpp/device/ip4/eth2p-ethip4-ip4base-ipolicemarkbase-dev.robot10
-rw-r--r--tests/vpp/device/ip4_tunnels/eth2p-ethip4vxlan-l2bdbasemaclrn-dev.robot8
-rw-r--r--tests/vpp/device/ip4_tunnels/eth2p-ethip4vxlan-l2xcbase-dev.robot8
-rw-r--r--tests/vpp/device/ip4_tunnels/lisp/eth2p-ethip4lisp-ip4base-dev.robot11
-rw-r--r--tests/vpp/device/ip4_tunnels/lisp/eth2p-ethip4lispgpe-ip4base-dev.robot11
-rw-r--r--tests/vpp/device/ip4_tunnels/lisp/eth2p-ethip4lispgpe-ip6base-dev.robot11
-rw-r--r--tests/vpp/device/ip6/eth2p-ethicmpv6-ip6base-dev.robot10
-rw-r--r--tests/vpp/device/ip6/eth2p-ethip6-ip6base-copblklistbase-dev.robot10
-rw-r--r--tests/vpp/device/ip6/eth2p-ethip6-ip6base-copwhtlistbase-dev.robot10
-rw-r--r--tests/vpp/device/ip6/eth2p-ethip6-ip6base-iacldstbase-dev.robot10
-rw-r--r--tests/vpp/device/ip6/eth2p-ethip6-ip6base-ipolicemarkbase-dev.robot10
-rw-r--r--tests/vpp/device/ip6_tunnels/lisp/eth2p-ethip6lispgpe-ip4base-dev.robot11
-rw-r--r--tests/vpp/device/ip6_tunnels/lisp/eth2p-ethip6lispgpe-ip6base-dev.robot11
-rw-r--r--tests/vpp/device/l2bd/eth2p-avf-dot1q-l2bdbasemaclrn-gbp-dev.robot12
-rw-r--r--tests/vpp/device/l2bd/eth2p-avf-dot1qip4-l2bdbasemaclrn-dev.robot11
-rw-r--r--tests/vpp/device/l2bd/eth2p-ethicmpv4-l2bdbasemaclrn-dev.robot9
-rw-r--r--tests/vpp/device/l2xc/eth2p-ethicmpv4-l2xcbase-dev.robot10
-rw-r--r--tests/vpp/device/vm_vhost/ip4/eth2p-ethicmpv4-ip4base-eth-2vhost-1vm-dev.robot10
-rw-r--r--tests/vpp/device/vm_vhost/ip6/eth2p-ethicmpv6-ip6base-eth-2vhost-1vm-dev.robot10
-rw-r--r--tests/vpp/device/vm_vhost/l2bd/eth2p-ethicmpv4-l2bdbasemaclrn-eth-2vhost-1vm-dev.robot8
-rw-r--r--tests/vpp/device/vm_vhost/l2xc/eth2p-ethicmpv4-l2xcbase-eth-2vhost-1vm-dev.robot10
-rw-r--r--tests/vpp/perf/container_memif/10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/container_memif/10ge2p1x710-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrpdr.robot8
-rw-r--r--tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-2memif-1dcr-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-2memif-1lxc-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/container_memif/10ge2p1x710-ethip4-ip4base-eth-2memif-1dcr-ndrpdr.robot10
-rw-r--r--tests/vpp/perf/container_memif/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/container_memif/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr.robot8
-rw-r--r--tests/vpp/perf/container_memif/2n1l-10ge2p1x710-eth-l2xcbase-eth-2memif-1dcr-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/container_memif/2n1l-10ge2p1x710-ethip4-ip4base-eth-2memif-1dcr-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-int-aes128gcm-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-int-aes256gcm-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-policy-aes128gcm-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-policy-aes256gcm-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-policy-aes128gcm-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-policy-aes256gcm-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-int-aes128gcm-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-int-aes256gcm-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-policy-aes128gcm-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-policy-aes256gcm-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128gcm-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes256gcm-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr.robot15
-rw-r--r--tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr.robot15
-rw-r--r--tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-policy-aes128gcm-ndrpdr.robot19
-rw-r--r--tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-policy-aes256gcm-ndrpdr.robot15
-rw-r--r--tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec20000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec20000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec20000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec20000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec400tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec400tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec400tnlsw-ip4base-int-aes128gcm-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec400tnlsw-ip4base-int-aes256gcm-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128gcm-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes256gcm-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128gcm-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes256gcm-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec60000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec60000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec60000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec60000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsectptlispgpe-ip4base-aes128cbc-hmac256sha-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-avf-dot1q-ip4base-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-avf-eth-ip4base-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-avf-ethip4-ip4scale200k-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-avf-ethip4-ip4scale20k-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-avf-ethip4-ip4scale2m-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-dot1q-ip4base-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-copwhtlistbase-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-iacldstbase-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-ipolicemarkbase-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale200k-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale20k-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale2m-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-100flows-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-100kflows-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-10kflows-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-100flows-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-100kflows-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-10kflows-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-100flows-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-100kflows-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-10kflows-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-100flows-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-100kflows-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-10kflows-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-100flows-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-100kflows-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-100flows-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-100kflows-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-nat44-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-100flows-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-100kflows-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-10kflows-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-100flows-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-100kflows-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-10kflows-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-100flows-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-100kflows-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-10kflows-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-100flows-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-100kflows-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-10kflows-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-100flows-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-100kflows-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-10kflows-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-100flows-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-100kflows-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-10kflows-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-udpsrcscale15-nat44-ndrpdr.robot15
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale10-udpsrcscale15-nat44-ndrpdr.robot16
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale100-udpsrcscale15-nat44-ndrpdr.robot16
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale1000-udpsrcscale15-nat44-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale2000-udpsrcscale15-nat44-ndrpdr.robot16
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale4000-udpsrcscale15-nat44-ndrpdr.robot13
-rw-r--r--tests/vpp/perf/ip4/2n1l-10ge2p1x710-avf-dot1q-ip4base-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/ip4/2n1l-10ge2p1x710-avf-ethip4-ip4base-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/ip4/2n1l-10ge2p1x710-avf-ethip4-ip4scale200k-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/ip4/2n1l-10ge2p1x710-avf-ethip4-ip4scale20k-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/ip4/2n1l-10ge2p1x710-avf-ethip4-ip4scale2m-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/ip4/2n1l-10ge2p1x710-dot1q-ip4base-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-copwhtlistbase-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-iacldstbase-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-ipolicemarkbase-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale200k-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale20k-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale2m-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl1sf-10kflows-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl1sl-10kflows-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-nat44-ndrpdr.robot13
-rw-r--r--tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-oacl50sf-10kflows-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-oacl50sl-10kflows-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale100l2bd100vlan100vxlan-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale10l2bd10vlan10vxlan-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale1kl2bd1kvlan1kvxlan-ndrpdr.robot13
-rw-r--r--tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale1l2bd1vlan1vxlan-ndrpdr.robot13
-rw-r--r--tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4lispip4-ip4base-ndrpdr.robot11
-rw-r--r--tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4lispip6-ip4base-ndrpdr.robot11
-rw-r--r--tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-ndrpdr.robot11
-rw-r--r--tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4vxlan-l2xcbase-ndrpdr.robot11
-rw-r--r--tests/vpp/perf/ip6/10ge2p1x710-avf-dot1q-ip6base-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/ip6/10ge2p1x710-avf-ethip6-ip6base-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/ip6/10ge2p1x710-avf-ethip6-ip6scale200k-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/ip6/10ge2p1x710-avf-ethip6-ip6scale20k-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/ip6/10ge2p1x710-avf-ethip6-ip6scale2m-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/ip6/10ge2p1x710-dot1q-ip6base-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-copwhtlistbase-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-iacldstbase-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale200k-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale20k-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale2m-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/ip6/2n1l-10ge2p1x710-avf-dot1q-ip6base-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/ip6/2n1l-10ge2p1x710-avf-ethip6-ip6base-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/ip6/2n1l-10ge2p1x710-avf-ethip6-ip6scale200k-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/ip6/2n1l-10ge2p1x710-avf-ethip6-ip6scale20k-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/ip6/2n1l-10ge2p1x710-avf-ethip6-ip6scale2m-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/ip6/2n1l-10ge2p1x710-dot1q-ip6base-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6base-copwhtlistbase-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6base-iacldstbase-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6base-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale200k-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale20k-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale2m-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/ip6_tunnels/10ge2p1x710-ethip6lispip4-ip6base-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/ip6_tunnels/10ge2p1x710-ethip6lispip6-ip6base-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/l2/10ge2p1x710-avf-dot1q-l2bdbasemaclrn-ndrpdr.robot16
-rw-r--r--tests/vpp/perf/l2/10ge2p1x710-avf-eth-l2bdbasemaclrn-ndrpdr.robot15
-rw-r--r--tests/vpp/perf/l2/10ge2p1x710-avf-eth-l2patch-ndrpdr.robot16
-rw-r--r--tests/vpp/perf/l2/10ge2p1x710-avf-eth-l2xcbase-ndrpdr.robot16
-rw-r--r--tests/vpp/perf/l2/10ge2p1x710-dot1ad-l2xcbase-ndrpdr.robot15
-rw-r--r--tests/vpp/perf/l2/10ge2p1x710-dot1q-l2bdbasemaclrn-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/l2/10ge2p1x710-dot1q-l2xcbase-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-100flows-ndrpdr.robot16
-rw-r--r--tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-100kflows-ndrpdr.robot16
-rw-r--r--tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-10kflows-ndrpdr.robot16
-rw-r--r--tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-100flows-ndrpdr.robot16
-rw-r--r--tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-100kflows-ndrpdr.robot16
-rw-r--r--tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-10kflows-ndrpdr.robot16
-rw-r--r--tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-100flows-ndrpdr.robot16
-rw-r--r--tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-100kflows-ndrpdr.robot16
-rw-r--r--tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-10kflows-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-100flows-ndrpdr.robot16
-rw-r--r--tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-100kflows-ndrpdr.robot16
-rw-r--r--tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-10kflows-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-100flows-ndrpdr.robot16
-rw-r--r--tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-100kflows-ndrpdr.robot16
-rw-r--r--tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-100flows-ndrpdr.robot16
-rw-r--r--tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-100kflows-ndrpdr.robot16
-rw-r--r--tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-100flows-ndrpdr.robot16
-rw-r--r--tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-100kflows-ndrpdr.robot16
-rw-r--r--tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-10kflows-ndrpdr.robot16
-rw-r--r--tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-100flows-ndrpdr.robot16
-rw-r--r--tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-100kflows-ndrpdr.robot16
-rw-r--r--tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-10kflows-ndrpdr.robot16
-rw-r--r--tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-100flows-ndrpdr.robot16
-rw-r--r--tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-100kflows-ndrpdr.robot16
-rw-r--r--tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-ndrpdr.robot16
-rw-r--r--tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-ndrpdr.robot13
-rw-r--r--tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-100flows-ndrpdr.robot16
-rw-r--r--tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-100kflows-ndrpdr.robot16
-rw-r--r--tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-10kflows-ndrpdr.robot16
-rw-r--r--tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-100flows-ndrpdr.robot16
-rw-r--r--tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-100kflows-ndrpdr.robot16
-rw-r--r--tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-10kflows-ndrpdr.robot16
-rw-r--r--tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-100flows-ndrpdr.robot16
-rw-r--r--tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-100kflows-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-10kflows-ndrpdr.robot16
-rw-r--r--tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-100flows-ndrpdr.robot16
-rw-r--r--tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-100kflows-ndrpdr.robot16
-rw-r--r--tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-10kflows-ndrpdr.robot16
-rw-r--r--tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-100flows-ndrpdr.robot16
-rw-r--r--tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-100kflows-ndrpdr.robot16
-rw-r--r--tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-10kflows-ndrpdr.robot16
-rw-r--r--tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-100flows-ndrpdr.robot16
-rw-r--r--tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-100kflows-ndrpdr.robot16
-rw-r--r--tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-10kflows-ndrpdr.robot16
-rw-r--r--tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale100kmaclrn-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale10kmaclrn-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale1mmaclrn-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/l2/10ge2p1x710-eth-l2patch-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/l2/10ge2p1x710-eth-l2xcbase-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/l2/2n1l-10ge2p1x710-avf-dot1q-l2bdbasemaclrn-gbp-ndrpdr.robot16
-rw-r--r--tests/vpp/perf/l2/2n1l-10ge2p1x710-avf-dot1q-l2bdbasemaclrn-ndrpdr.robot15
-rw-r--r--tests/vpp/perf/l2/2n1l-10ge2p1x710-avf-eth-l2bdbasemaclrn-ndrpdr.robot15
-rw-r--r--tests/vpp/perf/l2/2n1l-10ge2p1x710-avf-eth-l2patch-ndrpdr.robot16
-rw-r--r--tests/vpp/perf/l2/2n1l-10ge2p1x710-avf-eth-l2xcbase-ndrpdr.robot16
-rw-r--r--tests/vpp/perf/l2/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-ndrpdr.robot13
-rw-r--r--tests/vpp/perf/l2/2n1l-10ge2p1x710-dot1q-l2xcbase-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-ndrpdr.robot13
-rw-r--r--tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale100kmaclrn-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale10kmaclrn-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale1mmaclrn-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2patch-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2xcbase-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/lb/2n1l-10ge2p1x710-ethip4-loadbalancer-maglev-ndrpdr.robot12
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-10ch-20mif-10dcr1t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-10ch-20mif-10dcr2t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-10ch-40mif-20dcr1t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-12mif-6dcr1t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-12mif-6dcr2t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-16mif-8dcr1t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-16mif-8dcr2t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-20mif-10dcr1t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-20mif-10dcr2t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-2mif-1dcr1t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-2mif-1dcr2t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-4mif-2dcr1t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-4mif-2dcr2t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-8mif-4dcr1t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-8mif-4dcr2t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-16mif-8dcr1t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-16mif-8dcr2t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-24mif-12dcr1t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-24mif-12dcr2t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-32mif-16dcr1t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-32mif-16dcr2t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-40mif-20dcr1t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-4mif-2dcr1t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-4mif-2dcr2t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-8mif-4dcr1t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-8mif-4dcr2t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-16mif-8dcr1t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-16mif-8dcr2t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-32mif-16dcr1t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-32mif-16dcr2t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-48mif-24dcr1t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-8mif-4dcr1t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-8mif-4dcr2t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-12mif-6dcr1t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-12mif-6dcr2t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-24mif-12dcr1t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-24mif-12dcr2t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-48mif-24dcr1t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-16mif-8dcr1t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-16mif-8dcr2t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-32mif-16dcr1t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-32mif-16dcr2t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-10pl-20mif-10dcr1t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-10pl-20mif-10dcr2t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-10pl-20mif-20dcr1t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-10dcr1t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-10dcr2t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-1dcr1t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-1dcr2t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-2dcr1t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-2dcr2t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-4dcr1t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-4dcr2t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-6dcr1t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-6dcr2t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-8dcr1t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-8dcr2t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-12dcr1t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-12dcr2t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-16dcr1t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-16dcr2t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-20dcr1t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-2dcr1t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-2dcr2t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-4dcr1t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-4dcr2t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-8dcr1t-vppip4-ndrpdr.robot11
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-8dcr2t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-8mif-4dcr1t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-8mif-4dcr2t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-16dcr1t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-16dcr2t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-24dcr1t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-8dcr1t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-8dcr2t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-12dcr1t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-12dcr2t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-24dcr1t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-6dcr1t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-6dcr2t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-16dcr1t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-16dcr2t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-8dcr1t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-8dcr2t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-10ch-20vh-10vm1t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-10ch-20vh-10vm2t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-10ch-40vh-20vm1t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-12vh-6vm1t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-12vh-6vm2t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-16vh-8vm1t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-16vh-8vm2t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-20vh-10vm1t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-20vh-10vm2t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-2vh-1vm1t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-2vh-1vm2t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-4vh-2vm1t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-4vh-2vm2t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-8vh-4vm1t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-8vh-4vm2t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-16vh-8vm1t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-16vh-8vm2t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-24vh-12vm1t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-24vh-12vm2t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-32vh-16vm1t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-32vh-16vm2t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-40vh-20vm1t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-4vh-2vm1t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-4vh-2vm2t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-8vh-4vm1t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-8vh-4vm2t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-16vh-8vm1t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-16vh-8vm2t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-32vh-16vm1t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-32vh-16vm2t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-48vh-24vm1t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-8vh-4vm1t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-8vh-4vm2t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-12vh-6vm1t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-12vh-6vm2t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-24vh-12vm1t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-24vh-12vm2t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-48vh-24vm1t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-8ch-16vh-8vm1t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-8ch-16vh-8vm2t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-8ch-32vh-16vm1t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-8ch-32vh-16vm2t-vppip4-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm1t-testpmd-reconf.robot9
-rw-r--r--tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm2t-testpmd-reconf.robot9
-rw-r--r--tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-10ch-20vh-10vm1t-testpmd-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-10ch-20vh-10vm2t-testpmd-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-1ch-1ach-2vh-1vm1t-testpmd-reconf.robot9
-rw-r--r--tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-1ch-1ach-2vh-1vm2t-testpmd-reconf.robot9
-rw-r--r--tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-1ch-2vh-1vm1t-testpmd-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-1ch-2vh-1vm2t-testpmd-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-2ch-1ach-4vh-2vm1t-testpmd-reconf.robot9
-rw-r--r--tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-2ch-1ach-4vh-2vm2t-testpmd-reconf.robot9
-rw-r--r--tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-2ch-4vh-2vm1t-testpmd-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-2ch-4vh-2vm2t-testpmd-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-4ch-1ach-8vh-4vm1t-testpmd-reconf.robot9
-rw-r--r--tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-4ch-1ach-8vh-4vm2t-testpmd-reconf.robot9
-rw-r--r--tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-4ch-8vh-4vm1t-testpmd-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-4ch-8vh-4vm2t-testpmd-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-6ch-12vh-6vm1t-testpmd-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-6ch-12vh-6vm2t-testpmd-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-6ch-1ach-12vh-6vm1t-testpmd-reconf.robot9
-rw-r--r--tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-6ch-1ach-12vh-6vm2t-testpmd-reconf.robot9
-rw-r--r--tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-8ch-16vh-8vm1t-testpmd-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-8ch-16vh-8vm2t-testpmd-ndrpdr.robot9
-rw-r--r--tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-8ch-1ach-16vh-8vm1t-testpmd-reconf.robot9
-rw-r--r--tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-8ch-1ach-16vh-8vm2t-testpmd-reconf.robot9
-rw-r--r--tests/vpp/perf/srv6/10ge2p1x710-ethip6ip6-ip6base-srv6enc1sid-ndrpdr.robot15
-rw-r--r--tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-dyn-ndrpdr.robot15
-rw-r--r--tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdr.robot15
-rw-r--r--tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-stat-ndrpdr.robot15
-rw-r--r--tests/vpp/perf/tcp/2n1l-10ge2p1x710-eth-ip4tcphttp-wrk8u8c50con-cps.robot13
-rw-r--r--tests/vpp/perf/tcp/2n1l-10ge2p1x710-eth-ip4tcphttp-wrk8u8c50con-rps.robot13
-rw-r--r--tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/vm_vhost/10ge2p1x710-2lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/vm_vhost/10ge2p1x710-2lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/vm_vhost/10ge2p1x710-2lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/vm_vhost/10ge2p1x710-2lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot13
-rw-r--r--tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot13
-rw-r--r--tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4-ip4base-eth-2vhostvr1024-1vm-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4-ip4base-eth-2vhostvr1024-1vm-vppip4-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot13
-rw-r--r--tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot13
-rw-r--r--tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-eth-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-eth-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-ethip4-ip4base-eth-2vhostvr1024-1vm-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-ethip4-ip4base-eth-2vhostvr1024-1vm-vppip4-ndrpdr.robot14
-rw-r--r--tests/vpp/perf/vts/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr.robot15
-rw-r--r--tests/vpp/perf/vts/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-ndrpdr.robot15
-rw-r--r--tests/vpp/perf/vts/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-ndrpdr.robot15
481 files changed, 3223 insertions, 2468 deletions
diff --git a/tests/vpp/device/container_memif/eth2p-ethicmpv4-ip4base-eth-2memif-1dcr-dev.robot b/tests/vpp/device/container_memif/eth2p-ethicmpv4-ip4base-eth-2memif-1dcr-dev.robot
index 2cbea18243..2c43924150 100644
--- a/tests/vpp/device/container_memif/eth2p-ethicmpv4-ip4base-eth-2memif-1dcr-dev.robot
+++ b/tests/vpp/device/container_memif/eth2p-ethicmpv4-ip4base-eth-2memif-1dcr-dev.robot
@@ -15,7 +15,7 @@
| Resource | resources/libraries/robot/shared/default.robot
| ...
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
-| ... | NIC_Virtual | ETH | IP4FWD | BASE | MEMIF | DOCKER
+| ... | NIC_Virtual | ETH | IP4FWD | BASE | MEMIF | DOCKER | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | scapy
| Test Setup | Setup test
@@ -41,6 +41,7 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
+| ${crypto_type}= | ${None}
| ${nic_name}= | virtual
| ${nic_driver}= | vfio-pci
| ${overhead}= | ${0}
@@ -64,11 +65,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Start containers for test | auto_scale=${False} | pinning=${False}
| | And Initialize IPv4 routing with memif pairs
| | Then Send packet and verify headers
diff --git a/tests/vpp/device/container_memif/eth2p-ethicmpv4-l2bdbasemaclrn-eth-2memif-1dcr-dev.robot b/tests/vpp/device/container_memif/eth2p-ethicmpv4-l2bdbasemaclrn-eth-2memif-1dcr-dev.robot
index ec49c7ab88..643879a086 100644
--- a/tests/vpp/device/container_memif/eth2p-ethicmpv4-l2bdbasemaclrn-eth-2memif-1dcr-dev.robot
+++ b/tests/vpp/device/container_memif/eth2p-ethicmpv4-l2bdbasemaclrn-eth-2memif-1dcr-dev.robot
@@ -15,7 +15,7 @@
| Resource | resources/libraries/robot/shared/default.robot
| ...
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
-| ... | NIC_Virtual | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER
+| ... | NIC_Virtual | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | scapy
| Test Setup | Setup test
@@ -40,6 +40,7 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
+| ${crypto_type}= | ${None}
| ${nic_name}= | virtual
| ${nic_driver}= | vfio-pci
| ${overhead}= | ${0}
@@ -63,9 +64,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/device/container_memif/eth2p-ethicmpv4-l2xcbase-eth-2memif-1dcr-dev.robot b/tests/vpp/device/container_memif/eth2p-ethicmpv4-l2xcbase-eth-2memif-1dcr-dev.robot
index 0c88aaef8e..83e9f8a81e 100644
--- a/tests/vpp/device/container_memif/eth2p-ethicmpv4-l2xcbase-eth-2memif-1dcr-dev.robot
+++ b/tests/vpp/device/container_memif/eth2p-ethicmpv4-l2xcbase-eth-2memif-1dcr-dev.robot
@@ -15,7 +15,7 @@
| Resource | resources/libraries/robot/shared/default.robot
| ...
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
-| ... | NIC_Virtual | ETH | L2XCFWD | BASE | MEMIF | DOCKER
+| ... | NIC_Virtual | ETH | L2XCFWD | BASE | MEMIF | DOCKER | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | scapy
| Test Setup | Setup test
@@ -39,6 +39,7 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
+| ${crypto_type}= | ${None}
| ${nic_name}= | virtual
| ${nic_driver}= | vfio-pci
| ${overhead}= | ${0}
@@ -62,11 +63,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Start containers for test | auto_scale=${False} | pinning=${False}
| | And Initialize L2 xconnect with memif pairs
| | Then Send ICMPv4 bidirectionally and verify received packets
diff --git a/tests/vpp/device/container_memif/eth2p-ethicmpv6-ip6base-eth-2memif-1dcr-dev.robot b/tests/vpp/device/container_memif/eth2p-ethicmpv6-ip6base-eth-2memif-1dcr-dev.robot
index 67812dd4f8..3d6836f3b2 100644
--- a/tests/vpp/device/container_memif/eth2p-ethicmpv6-ip6base-eth-2memif-1dcr-dev.robot
+++ b/tests/vpp/device/container_memif/eth2p-ethicmpv6-ip6base-eth-2memif-1dcr-dev.robot
@@ -15,7 +15,7 @@
| Resource | resources/libraries/robot/shared/default.robot
| ...
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
-| ... | NIC_Virtual | ETH | IP6FWD | BASE | MEMIF | DOCKER
+| ... | NIC_Virtual | ETH | IP6FWD | BASE | MEMIF | DOCKER | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | scapy
| Test Setup | Setup test
@@ -41,6 +41,7 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
+| ${crypto_type}= | ${None}
| ${nic_name}= | virtual
| ${nic_driver}= | vfio-pci
| ${overhead}= | ${0}
@@ -64,11 +65,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Start containers for test | auto_scale=${False} | pinning=${False}
| | And Set interfaces in path up
| | And Set up memif interfaces on DUT node
diff --git a/tests/vpp/device/crypto/eth2p-ethip4ipsec1tnlsw-ip4base-policy-aes-128-cbc-sha-512-256-dev.robot b/tests/vpp/device/crypto/eth2p-ethip4ipsec1tnlsw-ip4base-policy-aes-128-cbc-sha-512-256-dev.robot
index 648bb17fc7..72ba5935ff 100644
--- a/tests/vpp/device/crypto/eth2p-ethip4ipsec1tnlsw-ip4base-policy-aes-128-cbc-sha-512-256-dev.robot
+++ b/tests/vpp/device/crypto/eth2p-ethip4ipsec1tnlsw-ip4base-policy-aes-128-cbc-sha-512-256-dev.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
| ... | NIC_Virtual | IP4FWD | IPSEC | IPSECSW | IPSECTUN | IP4BASE
-| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES
+| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | scapy
| Test Setup | Setup test
@@ -38,6 +38,7 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so
| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
+| ${crypto_type}= | ${None}
| ${nic_name}= | virtual
| ${nic_driver}= | vfio-pci
| ${overhead}= | ${54}
@@ -70,11 +71,12 @@
| | ${encr_alg}= | Crypto Alg AES CBC 128
| | ${auth_alg}= | Integ Alg SHA 512 256
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Configure topology for IPv4 IPsec testing
| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg}
| | And Configure manual keyed connection for IPSec
diff --git a/tests/vpp/device/crypto/eth2p-ethip4ipsec1tptsw-ip4base-policy-aes-128-cbc-sha-512-256-dev.robot b/tests/vpp/device/crypto/eth2p-ethip4ipsec1tptsw-ip4base-policy-aes-128-cbc-sha-512-256-dev.robot
index 2e43f71284..84b38364e6 100644
--- a/tests/vpp/device/crypto/eth2p-ethip4ipsec1tptsw-ip4base-policy-aes-128-cbc-sha-512-256-dev.robot
+++ b/tests/vpp/device/crypto/eth2p-ethip4ipsec1tptsw-ip4base-policy-aes-128-cbc-sha-512-256-dev.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
| ... | NIC_Virtual | IP4FWD | IPSEC | IPSECSW | IPSECTPT | IP4BASE
-| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES
+| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | scapy
| Test Setup | Setup test
@@ -38,6 +38,7 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so
| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
+| ${crypto_type}= | ${None}
| ${nic_name}= | virtual
| ${nic_driver}= | vfio-pci
| ${overhead}= | ${54}
@@ -70,11 +71,12 @@
| | ${encr_alg}= | Crypto Alg AES CBC 128
| | ${auth_alg}= | Integ Alg SHA 512 256
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Configure topology for IPv4 IPsec testing
| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg}
| | And Configure manual keyed connection for IPSec
diff --git a/tests/vpp/device/crypto/eth2p-ethip6ipsec1tnlsw-ip6base-policy-aes-128-cbc-sha-512-256-dev.robot b/tests/vpp/device/crypto/eth2p-ethip6ipsec1tnlsw-ip6base-policy-aes-128-cbc-sha-512-256-dev.robot
index e4107084c7..f3a8ba1e86 100644
--- a/tests/vpp/device/crypto/eth2p-ethip6ipsec1tnlsw-ip6base-policy-aes-128-cbc-sha-512-256-dev.robot
+++ b/tests/vpp/device/crypto/eth2p-ethip6ipsec1tnlsw-ip6base-policy-aes-128-cbc-sha-512-256-dev.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
| ... | NIC_Virtual | IP6FWD | IPSEC | IPSECSW | IPSECTUN | IP6BASE
-| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES
+| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | scapy
| Test Setup | Setup test
@@ -38,6 +38,7 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so
| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
+| ${crypto_type}= | ${None}
| ${nic_name}= | virtual
| ${nic_driver}= | vfio-pci
| ${overhead}= | ${54}
@@ -71,11 +72,12 @@
| | ${encr_alg}= | Crypto Alg AES CBC 128
| | ${auth_alg}= | Integ Alg SHA 512 256
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Configure topology for IPv6 IPsec testing
| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg}
| | And Configure manual keyed connection for IPSec
diff --git a/tests/vpp/device/crypto/eth2p-ethip6ipsec1tptsw-ip6base-policy-aes-128-cbc-sha-512-256-dev.robot b/tests/vpp/device/crypto/eth2p-ethip6ipsec1tptsw-ip6base-policy-aes-128-cbc-sha-512-256-dev.robot
index 5e323edfcc..473cd001a9 100644
--- a/tests/vpp/device/crypto/eth2p-ethip6ipsec1tptsw-ip6base-policy-aes-128-cbc-sha-512-256-dev.robot
+++ b/tests/vpp/device/crypto/eth2p-ethip6ipsec1tptsw-ip6base-policy-aes-128-cbc-sha-512-256-dev.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
| ... | NIC_Virtual | IP6FWD | IPSEC | IPSECSW | IPSECTPT | IP6BASE
-| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES
+| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | scapy
| Test Setup | Setup test
@@ -38,6 +38,7 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so
| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
+| ${crypto_type}= | ${None}
| ${nic_name}= | virtual
| ${nic_driver}= | vfio-pci
| ${overhead}= | ${58}
@@ -71,11 +72,12 @@
| | ${encr_alg}= | Crypto Alg AES CBC 128
| | ${auth_alg}= | Integ Alg SHA 512 256
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Configure topology for IPv6 IPsec testing
| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg}
| | And Configure manual keyed connection for IPSec
diff --git a/tests/vpp/device/interfaces/eth2p-ethicmpv4-ip4base-eth-1tap-dev.robot b/tests/vpp/device/interfaces/eth2p-ethicmpv4-ip4base-eth-1tap-dev.robot
index 12d8304ae6..30af46ed3b 100644
--- a/tests/vpp/device/interfaces/eth2p-ethicmpv4-ip4base-eth-1tap-dev.robot
+++ b/tests/vpp/device/interfaces/eth2p-ethicmpv4-ip4base-eth-1tap-dev.robot
@@ -15,7 +15,7 @@
| Resource | resources/libraries/robot/shared/default.robot
| ...
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
-| ... | NIC_Virtual | ETH | IP4FWD | BASE | IP4BASE | 1TAP
+| ... | NIC_Virtual | ETH | IP4FWD | BASE | IP4BASE | 1TAP | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | scapy
| Test Setup | Setup test | namespace
@@ -39,6 +39,7 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
+| ${crypto_type}= | ${None}
| ${nic_name}= | virtual
| ${nic_driver}= | vfio-pci
| ${overhead}= | ${0}
@@ -67,9 +68,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/device/interfaces/eth2p-ethicmpv4-ip4base-eth-1tap-namespace-dev.robot b/tests/vpp/device/interfaces/eth2p-ethicmpv4-ip4base-eth-1tap-namespace-dev.robot
index 4d7a4f41e6..36fb0e92e5 100644
--- a/tests/vpp/device/interfaces/eth2p-ethicmpv4-ip4base-eth-1tap-namespace-dev.robot
+++ b/tests/vpp/device/interfaces/eth2p-ethicmpv4-ip4base-eth-1tap-namespace-dev.robot
@@ -16,6 +16,7 @@
| ...
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
| ... | NIC_Virtual | ETH | IP4FWD | BASE | IP4BASE | 1TAP | NAMESPACE
+| ... | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | scapy
| Test Setup | Setup test | namespace
@@ -39,6 +40,7 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
+| ${crypto_type}= | ${None}
| ${nic_name}= | virtual
| ${nic_driver}= | vfio-pci
| ${overhead}= | ${0}
@@ -68,9 +70,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/device/interfaces/eth2p-ethicmpv4-l2bdbasemaclrn-eth-2tap-dev.robot b/tests/vpp/device/interfaces/eth2p-ethicmpv4-l2bdbasemaclrn-eth-2tap-dev.robot
index 3bfe6e1709..1c3d543390 100644
--- a/tests/vpp/device/interfaces/eth2p-ethicmpv4-l2bdbasemaclrn-eth-2tap-dev.robot
+++ b/tests/vpp/device/interfaces/eth2p-ethicmpv4-l2bdbasemaclrn-eth-2tap-dev.robot
@@ -15,7 +15,7 @@
| Resource | resources/libraries/robot/shared/default.robot
| ...
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
-| ... | NIC_Virtual | ETH | L2BD | BASE | 2TAP
+| ... | NIC_Virtual | ETH | L2BD | BASE | 2TAP | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | scapy
| Test Setup | Setup test | namespace
@@ -40,6 +40,7 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
+| ${crypto_type}= | ${None}
| ${nic_name}= | virtual
| ${nic_driver}= | vfio-pci
| ${overhead}= | ${0}
@@ -60,9 +61,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/device/ip4/eth2p-ethicmpv4-ip4base-dev.robot b/tests/vpp/device/ip4/eth2p-ethicmpv4-ip4base-dev.robot
index 1ff7cd731b..858f4f388e 100644
--- a/tests/vpp/device/ip4/eth2p-ethicmpv4-ip4base-dev.robot
+++ b/tests/vpp/device/ip4/eth2p-ethicmpv4-ip4base-dev.robot
@@ -15,7 +15,7 @@
| Resource | resources/libraries/robot/shared/default.robot
| ...
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
-| ... | NIC_Virtual | ETH | IP4FWD | BASE | IP4BASE
+| ... | NIC_Virtual | ETH | IP4FWD | BASE | IP4BASE | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | scapy
| Test Setup | Setup test
@@ -38,6 +38,7 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
+| ${crypto_type}= | ${None}
| ${nic_name}= | virtual
| ${nic_driver}= | vfio-pci
| ${overhead}= | ${0}
@@ -57,11 +58,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv4 forwarding in circular topology
| | ... | remote_host1_ip=192.168.0.1 | remote_host2_ip=192.168.0.2
| | Then Send IPv4 ping packet and verify headers
diff --git a/tests/vpp/device/ip4/eth2p-ethip4-ip4base-copblklistbase-dev.robot b/tests/vpp/device/ip4/eth2p-ethip4-ip4base-copblklistbase-dev.robot
index 35eb142aab..463afe8528 100644
--- a/tests/vpp/device/ip4/eth2p-ethip4-ip4base-copblklistbase-dev.robot
+++ b/tests/vpp/device/ip4/eth2p-ethip4-ip4base-copblklistbase-dev.robot
@@ -15,7 +15,7 @@
| Resource | resources/libraries/robot/shared/default.robot
| ...
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
-| ... | NIC_Virtual | ETH | IP4FWD | FEATURE | COPBLKLIST
+| ... | NIC_Virtual | ETH | IP4FWD | FEATURE | COPBLKLIST | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | scapy
| Test Setup | Setup test
@@ -38,6 +38,7 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
+| ${crypto_type}= | ${None}
| ${nic_name}= | virtual
| ${nic_driver}= | vfio-pci
| ${overhead}= | ${0}
@@ -57,11 +58,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv4 forwarding in circular topology
| | And Add Fib Table | ${dut1} | 1
| | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=1 | local=${TRUE}
diff --git a/tests/vpp/device/ip4/eth2p-ethip4-ip4base-copwhtlistbase-dev.robot b/tests/vpp/device/ip4/eth2p-ethip4-ip4base-copwhtlistbase-dev.robot
index e99e91dccc..7095bdec62 100644
--- a/tests/vpp/device/ip4/eth2p-ethip4-ip4base-copwhtlistbase-dev.robot
+++ b/tests/vpp/device/ip4/eth2p-ethip4-ip4base-copwhtlistbase-dev.robot
@@ -15,7 +15,7 @@
| Resource | resources/libraries/robot/shared/default.robot
| ...
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
-| ... | NIC_Virtual | ETH | IP4FWD | FEATURE | COPWHLIST
+| ... | NIC_Virtual | ETH | IP4FWD | FEATURE | COPWHLIST | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | scapy
| Test Setup | Setup test
@@ -38,6 +38,7 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
+| ${crypto_type}= | ${None}
| ${nic_name}= | virtual
| ${nic_driver}= | vfio-pci
| ${overhead}= | ${0}
@@ -57,11 +58,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv4 forwarding in circular topology
| | And Add Fib Table | ${dut1} | 1
| | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=1 | local=${TRUE}
diff --git a/tests/vpp/device/ip4/eth2p-ethip4-ip4base-iacldstbase-dev.robot b/tests/vpp/device/ip4/eth2p-ethip4-ip4base-iacldstbase-dev.robot
index a44da15189..cad9436277 100644
--- a/tests/vpp/device/ip4/eth2p-ethip4-ip4base-iacldstbase-dev.robot
+++ b/tests/vpp/device/ip4/eth2p-ethip4-ip4base-iacldstbase-dev.robot
@@ -15,7 +15,7 @@
| Resource | resources/libraries/robot/shared/default.robot
| ...
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
-| ... | NIC_Virtual | ETH | IP4FWD | FEATURE | IACLDST
+| ... | NIC_Virtual | ETH | IP4FWD | FEATURE | IACLDST | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | scapy
| Test Setup | Setup test
@@ -38,6 +38,7 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
+| ${crypto_type}= | ${None}
| ${nic_name}= | virtual
| ${nic_driver}= | vfio-pci
| ${overhead}= | ${0}
@@ -58,11 +59,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv4 forwarding in circular topology
| | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3
| | ... | ${dut1} | ip4 | dst | 255.255.255.255
diff --git a/tests/vpp/device/ip4/eth2p-ethip4-ip4base-ipolicemarkbase-dev.robot b/tests/vpp/device/ip4/eth2p-ethip4-ip4base-ipolicemarkbase-dev.robot
index 5ed80aafde..04e3321957 100644
--- a/tests/vpp/device/ip4/eth2p-ethip4-ip4base-ipolicemarkbase-dev.robot
+++ b/tests/vpp/device/ip4/eth2p-ethip4-ip4base-ipolicemarkbase-dev.robot
@@ -15,7 +15,7 @@
| Resource | resources/libraries/robot/shared/default.robot
| ...
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
-| ... | NIC_Virtual | ETH | IP4FWD | FEATURE | POLICE_MARK
+| ... | NIC_Virtual | ETH | IP4FWD | FEATURE | POLICE_MARK | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | scapy
| Test Setup | Setup test
@@ -37,6 +37,7 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
+| ${crypto_type}= | ${None}
| ${nic_name}= | virtual
| ${nic_driver}= | vfio-pci
| ${overhead}= | ${0}
@@ -61,11 +62,12 @@
| | Set Test Variable | \${cb} | ${frame_size}
| | Set Test Variable | \${eb} | ${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv4 forwarding in circular topology
| | And Initialize IPv4 policer 2r3c-'ca' in circular topology
| | Then Send packet and verify marking
diff --git a/tests/vpp/device/ip4_tunnels/eth2p-ethip4vxlan-l2bdbasemaclrn-dev.robot b/tests/vpp/device/ip4_tunnels/eth2p-ethip4vxlan-l2bdbasemaclrn-dev.robot
index 19a6c40a7f..5a3b097fb0 100644
--- a/tests/vpp/device/ip4_tunnels/eth2p-ethip4vxlan-l2bdbasemaclrn-dev.robot
+++ b/tests/vpp/device/ip4_tunnels/eth2p-ethip4vxlan-l2bdbasemaclrn-dev.robot
@@ -16,6 +16,7 @@
| ...
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
| ... | NIC_Virtual | L2BDMACLRN | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY
+| ... | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | scapy
| Test Setup | Setup test
@@ -39,6 +40,7 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
+| ${crypto_type}= | ${None}
| ${nic_name}= | virtual
| ${nic_driver}= | vfio-pci
| ${overhead}= | ${50}
@@ -58,9 +60,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/device/ip4_tunnels/eth2p-ethip4vxlan-l2xcbase-dev.robot b/tests/vpp/device/ip4_tunnels/eth2p-ethip4vxlan-l2xcbase-dev.robot
index c905386e3c..e3fb0c9c07 100644
--- a/tests/vpp/device/ip4_tunnels/eth2p-ethip4vxlan-l2xcbase-dev.robot
+++ b/tests/vpp/device/ip4_tunnels/eth2p-ethip4vxlan-l2xcbase-dev.robot
@@ -16,6 +16,7 @@
| ...
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
| ... | NIC_Virtual | L2XCBASE | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY
+| ... | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | scapy
| Test Setup | Setup test
@@ -38,6 +39,7 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
+| ${crypto_type}= | ${None}
| ${nic_name}= | virtual
| ${nic_driver}= | vfio-pci
| ${overhead}= | ${50}
@@ -57,9 +59,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/device/ip4_tunnels/lisp/eth2p-ethip4lisp-ip4base-dev.robot b/tests/vpp/device/ip4_tunnels/lisp/eth2p-ethip4lisp-ip4base-dev.robot
index 813b77a112..2c95bfa9cb 100644
--- a/tests/vpp/device/ip4_tunnels/lisp/eth2p-ethip4lisp-ip4base-dev.robot
+++ b/tests/vpp/device/ip4_tunnels/lisp/eth2p-ethip4lisp-ip4base-dev.robot
@@ -14,11 +14,10 @@
*** Settings ***
| Resource | resources/libraries/robot/shared/default.robot
| ...
-# Import configuration and test data:
| Variables | resources/test_data/lisp/lisp.py
| ...
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
-| ... | NIC_Virtual | IP4FWD | LISP_IP4o4
+| ... | NIC_Virtual | IP4FWD | LISP_IP4o4 | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | scapy
| Test Setup | Setup test
@@ -44,6 +43,7 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
+| ${crypto_type}= | ${None}
| ${nic_name}= | virtual
| ${nic_driver}= | vfio-pci
| ${overhead}= | ${54}
@@ -62,11 +62,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Configure topology for IPv4 LISP testing
| | And Configure LISP in 2-node circular topology
| | ... | ${dut1} | ${dut1_if2} | ${NONE}
diff --git a/tests/vpp/device/ip4_tunnels/lisp/eth2p-ethip4lispgpe-ip4base-dev.robot b/tests/vpp/device/ip4_tunnels/lisp/eth2p-ethip4lispgpe-ip4base-dev.robot
index 8d7126c680..866e31c17c 100644
--- a/tests/vpp/device/ip4_tunnels/lisp/eth2p-ethip4lispgpe-ip4base-dev.robot
+++ b/tests/vpp/device/ip4_tunnels/lisp/eth2p-ethip4lispgpe-ip4base-dev.robot
@@ -14,11 +14,10 @@
*** Settings ***
| Resource | resources/libraries/robot/shared/default.robot
| ...
-# Import configuration and test data:
| Variables | resources/test_data/lisp/lisp.py
| ...
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
-| ... | NIC_Virtual | IP4FWD | LISPGPE_IP4o4
+| ... | NIC_Virtual | IP4FWD | LISPGPE_IP4o4 | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | scapy
| Test Setup | Setup test
@@ -44,6 +43,7 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
+| ${crypto_type}= | ${None}
| ${nic_name}= | virtual
| ${nic_driver}= | vfio-pci
| ${overhead}= | ${54}
@@ -63,11 +63,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Configure topology for IPv4 LISP testing
| | And Configure LISP in 2-node circular topology
| | ... | ${dut1} | ${dut1_if2} | ${NONE}
diff --git a/tests/vpp/device/ip4_tunnels/lisp/eth2p-ethip4lispgpe-ip6base-dev.robot b/tests/vpp/device/ip4_tunnels/lisp/eth2p-ethip4lispgpe-ip6base-dev.robot
index 5beaa33e11..8a556b12bd 100644
--- a/tests/vpp/device/ip4_tunnels/lisp/eth2p-ethip4lispgpe-ip6base-dev.robot
+++ b/tests/vpp/device/ip4_tunnels/lisp/eth2p-ethip4lispgpe-ip6base-dev.robot
@@ -14,11 +14,10 @@
*** Settings ***
| Resource | resources/libraries/robot/shared/default.robot
| ...
-# import additional Lisp settings from resource file
| Variables | resources/test_data/lisp/lisp.py
| ...
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
-| ... | NIC_Virtual | IP4FWD | LISPGPE_IP6o4
+| ... | NIC_Virtual | IP4FWD | LISPGPE_IP6o4 | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | scapy
| Test Setup | Setup test
@@ -44,6 +43,7 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
+| ${crypto_type}= | ${None}
| ${nic_name}= | virtual
| ${nic_driver}= | vfio-pci
| ${overhead}= | ${54}
@@ -64,11 +64,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Configure topology for IPv6 LISPoIP4 testing
| | And Vpp All RA Suppress Link Layer | ${nodes}
| | And Configure LISP in 2-node circular topology
diff --git a/tests/vpp/device/ip6/eth2p-ethicmpv6-ip6base-dev.robot b/tests/vpp/device/ip6/eth2p-ethicmpv6-ip6base-dev.robot
index 051f206e5a..9a045f80cf 100644
--- a/tests/vpp/device/ip6/eth2p-ethicmpv6-ip6base-dev.robot
+++ b/tests/vpp/device/ip6/eth2p-ethicmpv6-ip6base-dev.robot
@@ -15,7 +15,7 @@
| Resource | resources/libraries/robot/shared/default.robot
| ...
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
-| ... | NIC_Virtual | ETH | IP6FWD | BASE | IP6BASE
+| ... | NIC_Virtual | ETH | IP6FWD | BASE | IP6BASE | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | scapy
| Test Setup | Setup test
@@ -38,6 +38,7 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
+| ${crypto_type}= | ${None}
| ${nic_name}= | virtual
| ${nic_driver}= | vfio-pci
| ${overhead}= | ${0}
@@ -57,11 +58,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv6 forwarding in circular topology
| | ... | remote_host1_ip=3ffe:5f::1 | remote_host2_ip=3ffe:5f::2
| | Then Send IPv6 echo request packet and verify headers
diff --git a/tests/vpp/device/ip6/eth2p-ethip6-ip6base-copblklistbase-dev.robot b/tests/vpp/device/ip6/eth2p-ethip6-ip6base-copblklistbase-dev.robot
index c9a3309eaa..ec7a4b3dd7 100644
--- a/tests/vpp/device/ip6/eth2p-ethip6-ip6base-copblklistbase-dev.robot
+++ b/tests/vpp/device/ip6/eth2p-ethip6-ip6base-copblklistbase-dev.robot
@@ -15,7 +15,7 @@
| Resource | resources/libraries/robot/shared/default.robot
| ...
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
-| ... | NIC_Virtual | ETH | IP6FWD | FEATURE | COPBLKLIST
+| ... | NIC_Virtual | ETH | IP6FWD | FEATURE | COPBLKLIST | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | scapy
| Test Setup | Setup test
@@ -38,6 +38,7 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
+| ${crypto_type}= | ${None}
| ${nic_name}= | virtual
| ${nic_driver}= | vfio-pci
| ${overhead}= | ${0}
@@ -57,11 +58,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv6 forwarding in circular topology
| | And Add Fib Table | ${dut1} | 1 | ipv6=${True}
| | And Vpp Route Add | ${dut1} | 2002:1::0 | 64 | vrf=1 | local=${True}
diff --git a/tests/vpp/device/ip6/eth2p-ethip6-ip6base-copwhtlistbase-dev.robot b/tests/vpp/device/ip6/eth2p-ethip6-ip6base-copwhtlistbase-dev.robot
index fa017059ef..991494de69 100644
--- a/tests/vpp/device/ip6/eth2p-ethip6-ip6base-copwhtlistbase-dev.robot
+++ b/tests/vpp/device/ip6/eth2p-ethip6-ip6base-copwhtlistbase-dev.robot
@@ -15,7 +15,7 @@
| Resource | resources/libraries/robot/shared/default.robot
| ...
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
-| ... | NIC_Virtual | ETH | IP6FWD | FEATURE | COPWHLIST
+| ... | NIC_Virtual | ETH | IP6FWD | FEATURE | COPWHLIST | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | scapy
| Test Setup | Setup test
@@ -38,6 +38,7 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
+| ${crypto_type}= | ${None}
| ${nic_name}= | virtual
| ${nic_driver}= | vfio-pci
| ${overhead}= | ${0}
@@ -57,11 +58,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv6 forwarding in circular topology
| | And Add Fib Table | ${dut1} | 1 | ipv6=${TRUE}
| | And Vpp Route Add | ${dut1} | 2001:1:: | 64 | vrf=1 | local=${TRUE}
diff --git a/tests/vpp/device/ip6/eth2p-ethip6-ip6base-iacldstbase-dev.robot b/tests/vpp/device/ip6/eth2p-ethip6-ip6base-iacldstbase-dev.robot
index a214bc50b1..649731c172 100644
--- a/tests/vpp/device/ip6/eth2p-ethip6-ip6base-iacldstbase-dev.robot
+++ b/tests/vpp/device/ip6/eth2p-ethip6-ip6base-iacldstbase-dev.robot
@@ -15,7 +15,7 @@
| Resource | resources/libraries/robot/shared/default.robot
| ...
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
-| ... | NIC_Virtual | ETH | IP6FWD | FEATURE | IACLDST
+| ... | NIC_Virtual | ETH | IP6FWD | FEATURE | IACLDST | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | scapy
| Test Setup | Setup test
@@ -38,6 +38,7 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
+| ${crypto_type}= | ${None}
| ${nic_name}= | virtual
| ${nic_driver}= | vfio-pci
| ${overhead}= | ${0}
@@ -58,11 +59,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv6 forwarding in circular topology
| | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3
| | ... | ${dut1} | ip6 | dst | ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
diff --git a/tests/vpp/device/ip6/eth2p-ethip6-ip6base-ipolicemarkbase-dev.robot b/tests/vpp/device/ip6/eth2p-ethip6-ip6base-ipolicemarkbase-dev.robot
index f87030f724..dc2e7dbfc2 100644
--- a/tests/vpp/device/ip6/eth2p-ethip6-ip6base-ipolicemarkbase-dev.robot
+++ b/tests/vpp/device/ip6/eth2p-ethip6-ip6base-ipolicemarkbase-dev.robot
@@ -15,7 +15,7 @@
| Resource | resources/libraries/robot/shared/default.robot
| ...
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
-| ... | NIC_Virtual | ETH | IP6FWD | FEATURE | POLICE_MARK
+| ... | NIC_Virtual | ETH | IP6FWD | FEATURE | POLICE_MARK | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | scapy
| Test Setup | Setup test
@@ -37,6 +37,7 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
+| ${crypto_type}= | ${None}
| ${nic_name}= | virtual
| ${nic_driver}= | vfio-pci
| ${overhead}= | ${0}
@@ -61,11 +62,12 @@
| | Set Test Variable | \${cb} | ${frame_size}
| | Set Test Variable | \${eb} | ${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv6 forwarding in circular topology
| | And Initialize IPv6 policer 2r3c-'ca' in circular topology
| | Then Send packet and verify marking
diff --git a/tests/vpp/device/ip6_tunnels/lisp/eth2p-ethip6lispgpe-ip4base-dev.robot b/tests/vpp/device/ip6_tunnels/lisp/eth2p-ethip6lispgpe-ip4base-dev.robot
index 1147a663d9..f80338e779 100644
--- a/tests/vpp/device/ip6_tunnels/lisp/eth2p-ethip6lispgpe-ip4base-dev.robot
+++ b/tests/vpp/device/ip6_tunnels/lisp/eth2p-ethip6lispgpe-ip4base-dev.robot
@@ -14,11 +14,10 @@
*** Settings ***
| Resource | resources/libraries/robot/shared/default.robot
| ...
-# Import configuration and test data:
| Variables | resources/test_data/lisp/lisp.py
| ...
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
-| ... | NIC_Virtual | IP6FWD | LISPGPE_IP4o6
+| ... | NIC_Virtual | IP6FWD | LISPGPE_IP4o6 | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | scapy
| Test Setup | Setup test
@@ -43,6 +42,7 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
+| ${crypto_type}= | ${None}
| ${nic_name}= | virtual
| ${nic_driver}= | vfio-pci
| ${overhead}= | ${54}
@@ -63,11 +63,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Configure topology for IPv4 LISPoIP6 testing
| | And Vpp All RA Suppress Link Layer | ${nodes}
| | And Configure LISP in 2-node circular topology
diff --git a/tests/vpp/device/ip6_tunnels/lisp/eth2p-ethip6lispgpe-ip6base-dev.robot b/tests/vpp/device/ip6_tunnels/lisp/eth2p-ethip6lispgpe-ip6base-dev.robot
index 0ea8d6ed4a..b1430d9d6a 100644
--- a/tests/vpp/device/ip6_tunnels/lisp/eth2p-ethip6lispgpe-ip6base-dev.robot
+++ b/tests/vpp/device/ip6_tunnels/lisp/eth2p-ethip6lispgpe-ip6base-dev.robot
@@ -14,11 +14,10 @@
*** Settings ***
| Resource | resources/libraries/robot/shared/default.robot
| ...
-# Import configuration and test data:
| Variables | resources/test_data/lisp/lisp.py
| ...
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
-| ... | NIC_Virtual | IP6FWD | LISPGPE_IP6o6
+| ... | NIC_Virtual | IP6FWD | LISPGPE_IP6o6 | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | scapy
| Test Setup | Setup test
@@ -44,6 +43,7 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
+| ${crypto_type}= | ${None}
| ${nic_name}= | virtual
| ${nic_driver}= | vfio-pci
| ${overhead}= | ${54}
@@ -63,11 +63,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Configure topology for IPv6 LISP testing
| | And Configure LISP in 2-node circular topology
| | ... | ${dut1} | ${dut1_if2} | ${NONE}
diff --git a/tests/vpp/device/l2bd/eth2p-avf-dot1q-l2bdbasemaclrn-gbp-dev.robot b/tests/vpp/device/l2bd/eth2p-avf-dot1q-l2bdbasemaclrn-gbp-dev.robot
index 52830e6d1b..6fb6da40a7 100644
--- a/tests/vpp/device/l2bd/eth2p-avf-dot1q-l2bdbasemaclrn-gbp-dev.robot
+++ b/tests/vpp/device/l2bd/eth2p-avf-dot1q-l2bdbasemaclrn-gbp-dev.robot
@@ -18,7 +18,7 @@
| ... | NIC_Virtual | DOT1Q | L2BDMACLRN | BASE | DRV_AVF | GBP
| ...
| Suite Setup | Setup suite single link | avf | scapy
-| Suite Teardown | Tear down suite | vifs
+| Suite Teardown | Tear down suite
| Test Setup | Setup test
| Test Teardown | Tear down test | packet_trace
| ...
@@ -46,8 +46,8 @@
| ... | *[Ref] Applicable standard specifications:* IEEE 802.1q.
*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so | avf_plugin.so | gbp_plugin.so
-| ... | acl_plugin.so
+| @{plugins_to_enable}= | avf_plugin.so | gbp_plugin.so | acl_plugin.so
+| ${crypto_type}= | ${None}
| ${nic_name}= | virtual
| ${nic_driver}= | avf
| ${overhead}= | ${4}
@@ -69,9 +69,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add DPDK no PCI to all DUTs
-| | And Set Max Rate And Jumbo
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/device/l2bd/eth2p-avf-dot1qip4-l2bdbasemaclrn-dev.robot b/tests/vpp/device/l2bd/eth2p-avf-dot1qip4-l2bdbasemaclrn-dev.robot
index 807933d4cc..55e56ba932 100644
--- a/tests/vpp/device/l2bd/eth2p-avf-dot1qip4-l2bdbasemaclrn-dev.robot
+++ b/tests/vpp/device/l2bd/eth2p-avf-dot1qip4-l2bdbasemaclrn-dev.robot
@@ -18,7 +18,7 @@
| ... | NIC_Virtual | ETH | IP4FWD | BASE | DOT1Q | IP4BASE | DRV_AVF
| ...
| Suite Setup | Setup suite single link | avf | scapy
-| Suite Teardown | Tear down suite | vifs
+| Suite Teardown | Tear down suite
| Test Setup | Setup test
| Test Teardown | Tear down test | packet_trace
| ...
@@ -38,7 +38,8 @@
| ... | *[Ref] Applicable standard specifications:* IEEE 802.1q.
*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so | avf_plugin.so
+| @{plugins_to_enable}= | avf_plugin.so
+| ${crypto_type}= | ${None}
| ${nic_name}= | virtual
| ${nic_driver}= | avf
| ${overhead}= | ${4}
@@ -59,9 +60,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add DPDK no PCI to all DUTs
-| | And Set Max Rate And Jumbo
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/device/l2bd/eth2p-ethicmpv4-l2bdbasemaclrn-dev.robot b/tests/vpp/device/l2bd/eth2p-ethicmpv4-l2bdbasemaclrn-dev.robot
index 033f5c4192..69430d2f85 100644
--- a/tests/vpp/device/l2bd/eth2p-ethicmpv4-l2bdbasemaclrn-dev.robot
+++ b/tests/vpp/device/l2bd/eth2p-ethicmpv4-l2bdbasemaclrn-dev.robot
@@ -15,7 +15,7 @@
| Resource | resources/libraries/robot/shared/default.robot
| ...
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
-| ... | NIC_Virtual | ETH | L2BDMACLRN | BASE | ICMP
+| ... | NIC_Virtual | ETH | L2BDMACLRN | BASE | ICMP | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | scapy
| Test Setup | Setup test
@@ -39,6 +39,7 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
+| ${crypto_type}= | ${None}
| ${nic_name}= | virtual
| ${nic_driver}= | vfio-pci
| ${overhead}= | ${0}
@@ -59,9 +60,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/device/l2xc/eth2p-ethicmpv4-l2xcbase-dev.robot b/tests/vpp/device/l2xc/eth2p-ethicmpv4-l2xcbase-dev.robot
index e12eb29dd0..3a6a1ecd26 100644
--- a/tests/vpp/device/l2xc/eth2p-ethicmpv4-l2xcbase-dev.robot
+++ b/tests/vpp/device/l2xc/eth2p-ethicmpv4-l2xcbase-dev.robot
@@ -15,7 +15,7 @@
| Resource | resources/libraries/robot/shared/default.robot
| ...
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
-| ... | NIC_Virtual | ETH | L2XCFWD | BASE | ICMP
+| ... | NIC_Virtual | ETH | L2XCFWD | BASE | ICMP | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | scapy
| Test Setup | Setup test
@@ -39,6 +39,7 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
+| ${crypto_type}= | ${None}
| ${nic_name}= | virtual
| ${nic_driver}= | vfio-pci
| ${overhead}= | ${0}
@@ -59,11 +60,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize L2 xconnect in 2-node circular topology
| | Then Send ICMPv4 bidirectionally and verify received packets
| | ... | ${tg} | ${tg_if1} | ${tg_if2}
diff --git a/tests/vpp/device/vm_vhost/ip4/eth2p-ethicmpv4-ip4base-eth-2vhost-1vm-dev.robot b/tests/vpp/device/vm_vhost/ip4/eth2p-ethicmpv4-ip4base-eth-2vhost-1vm-dev.robot
index eb86da9107..ecdbc19e4b 100644
--- a/tests/vpp/device/vm_vhost/ip4/eth2p-ethicmpv4-ip4base-eth-2vhost-1vm-dev.robot
+++ b/tests/vpp/device/vm_vhost/ip4/eth2p-ethicmpv4-ip4base-eth-2vhost-1vm-dev.robot
@@ -15,7 +15,7 @@
| Resource | resources/libraries/robot/shared/default.robot
| ...
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
-| ... | NIC_Virtual | ETH | IP4FWD | BASE | VHOST | 1VM
+| ... | NIC_Virtual | ETH | IP4FWD | BASE | VHOST | 1VM | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | scapy
| Test Setup | Setup test
@@ -40,8 +40,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
+| ${crypto_type}= | ${None}
| ${nic_name}= | virtual
| ${nic_driver}= | vfio-pci
+| ${overhead}= | ${0}
| ${nf_chains}= | ${1}
| ${nf_nodes}= | ${1}
| ${nf_dtc} | ${1}
@@ -66,10 +68,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv4 forwarding with vhost in 2-node circular topology
| | ... | nf_nodes=${nf_nodes}
| | And Configure chains of NFs connected via vhost-user
diff --git a/tests/vpp/device/vm_vhost/ip6/eth2p-ethicmpv6-ip6base-eth-2vhost-1vm-dev.robot b/tests/vpp/device/vm_vhost/ip6/eth2p-ethicmpv6-ip6base-eth-2vhost-1vm-dev.robot
index 28dcc07d91..8e4cf4e6cb 100644
--- a/tests/vpp/device/vm_vhost/ip6/eth2p-ethicmpv6-ip6base-eth-2vhost-1vm-dev.robot
+++ b/tests/vpp/device/vm_vhost/ip6/eth2p-ethicmpv6-ip6base-eth-2vhost-1vm-dev.robot
@@ -15,7 +15,7 @@
| Resource | resources/libraries/robot/shared/default.robot
| ...
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
-| ... | NIC_Virtual | ETH | IP6FWD | BASE | VHOST | 1VM
+| ... | NIC_Virtual | ETH | IP6FWD | BASE | VHOST | 1VM | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | scapy
| Test Setup | Setup test
@@ -40,8 +40,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
+| ${crypto_type}= | ${None}
| ${nic_name}= | virtual
| ${nic_driver}= | vfio-pci
+| ${overhead}= | ${0}
| ${nf_chains}= | ${1}
| ${nf_nodes}= | ${1}
| ${nf_dtc} | ${1}
@@ -66,10 +68,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv6 forwarding with vhost in 2-node circular topology
| | ... | nf_nodes=${nf_nodes}
| | And Configure chains of NFs connected via vhost-user
diff --git a/tests/vpp/device/vm_vhost/l2bd/eth2p-ethicmpv4-l2bdbasemaclrn-eth-2vhost-1vm-dev.robot b/tests/vpp/device/vm_vhost/l2bd/eth2p-ethicmpv4-l2bdbasemaclrn-eth-2vhost-1vm-dev.robot
index 0070d39ef6..6b0e4853e0 100644
--- a/tests/vpp/device/vm_vhost/l2bd/eth2p-ethicmpv4-l2bdbasemaclrn-eth-2vhost-1vm-dev.robot
+++ b/tests/vpp/device/vm_vhost/l2bd/eth2p-ethicmpv4-l2bdbasemaclrn-eth-2vhost-1vm-dev.robot
@@ -16,6 +16,7 @@
| ...
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
| ... | NIC_Virtual | ETH | L2BDMACLRN | BASE | ICMP | VHOST | 1VM
+| ... | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | scapy
| Test Setup | Setup test
@@ -42,8 +43,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
+| ${crypto_type}= | ${None}
| ${nic_name}= | virtual
| ${nic_driver}= | vfio-pci
+| ${overhead}= | ${0}
| ${nf_chains}= | ${1}
| ${nf_nodes}= | ${1}
| ${nf_dtc} | ${1}
@@ -68,8 +71,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/device/vm_vhost/l2xc/eth2p-ethicmpv4-l2xcbase-eth-2vhost-1vm-dev.robot b/tests/vpp/device/vm_vhost/l2xc/eth2p-ethicmpv4-l2xcbase-eth-2vhost-1vm-dev.robot
index b50256791c..c9b2e40d4f 100644
--- a/tests/vpp/device/vm_vhost/l2xc/eth2p-ethicmpv4-l2xcbase-eth-2vhost-1vm-dev.robot
+++ b/tests/vpp/device/vm_vhost/l2xc/eth2p-ethicmpv4-l2xcbase-eth-2vhost-1vm-dev.robot
@@ -15,7 +15,7 @@
| Resource | resources/libraries/robot/shared/default.robot
| ...
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
-| ... | NIC_Virtual | ETH | L2XCFWD | BASE | ICMP | VHOST | 1VM
+| ... | NIC_Virtual | ETH | L2XCFWD | BASE | ICMP | VHOST | 1VM | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | scapy
| Test Setup | Setup test
@@ -41,8 +41,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
+| ${crypto_type}= | ${None}
| ${nic_name}= | virtual
| ${nic_driver}= | vfio-pci
+| ${overhead}= | ${0}
| ${nf_chains}= | ${1}
| ${nf_nodes}= | ${1}
| ${nf_dtc} | ${1}
@@ -67,10 +69,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize L2 xconnect with Vhost-User | nf_nodes=${nf_nodes}
| | And Configure chains of NFs connected via vhost-user
| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | vnf=vpp_chain_l2xc
diff --git a/tests/vpp/perf/container_memif/10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr.robot b/tests/vpp/perf/container_memif/10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr.robot
index d13d3bc2d0..3d5688818f 100644
--- a/tests/vpp/perf/container_memif/10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr.robot
+++ b/tests/vpp/perf/container_memif/10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr.robot
@@ -16,6 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | DOT1Q | L2BDMACLRN | BASE | MEMIF | DOCKER
+| ... | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -52,6 +53,7 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
| ${osi_layer}= | L2
@@ -83,11 +85,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Start containers for test
| | And Initialize L2 Bridge Domain with memif pairs and VLAN in circular topology
| | ... | ${bd_id1} | ${bd_id2} | ${subid} | ${tag_rewrite}
diff --git a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrpdr.robot b/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrpdr.robot
index fa9080567b..37a8d09d22 100644
--- a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrpdr.robot
+++ b/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrpdr.robot
@@ -16,6 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | LXC
+| ... | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -48,6 +49,7 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
| ${osi_layer}= | L2
@@ -75,9 +77,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-2memif-1dcr-ndrpdr.robot b/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-2memif-1dcr-ndrpdr.robot
index 9424efdad3..9df8533ee9 100644
--- a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-2memif-1dcr-ndrpdr.robot
+++ b/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-2memif-1dcr-ndrpdr.robot
@@ -16,6 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | L2XCFWD | BASE | MEMIF | DOCKER
+| ... | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -48,6 +49,7 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
| ${osi_layer}= | L2
@@ -75,11 +77,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Start containers for test
| | And Initialize L2 xconnect with memif pairs
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-2memif-1lxc-ndrpdr.robot b/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-2memif-1lxc-ndrpdr.robot
index 47cebd686a..91cfaeb2ff 100644
--- a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-2memif-1lxc-ndrpdr.robot
+++ b/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-2memif-1lxc-ndrpdr.robot
@@ -16,6 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | L2XCFWD | BASE | MEMIF | LXC
+| ... | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -47,6 +48,7 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
| ${osi_layer}= | L2
@@ -74,11 +76,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Start containers for test
| | And Initialize L2 xconnect with memif pairs
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/container_memif/10ge2p1x710-ethip4-ip4base-eth-2memif-1dcr-ndrpdr.robot b/tests/vpp/perf/container_memif/10ge2p1x710-ethip4-ip4base-eth-2memif-1dcr-ndrpdr.robot
index 0559353732..0e480ba091 100644
--- a/tests/vpp/perf/container_memif/10ge2p1x710-ethip4-ip4base-eth-2memif-1dcr-ndrpdr.robot
+++ b/tests/vpp/perf/container_memif/10ge2p1x710-ethip4-ip4base-eth-2memif-1dcr-ndrpdr.robot
@@ -15,7 +15,7 @@
| Resource | resources/libraries/robot/shared/default.robot
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | IP4FWD | BASE | MEMIF | DOCKER
+| ... | NIC_Intel-X710 | ETH | IP4FWD | BASE | MEMIF | DOCKER | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -48,6 +48,7 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
| ${osi_layer}= | L3
@@ -75,11 +76,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Start containers for test
| | And Initialize IPv4 routing with memif pairs
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr.robot b/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr.robot
index b63b82ef48..9eb3ca9c3a 100644
--- a/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr.robot
+++ b/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr.robot
@@ -16,6 +16,7 @@
| ...
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | DOT1Q | L2BDMACLRN | BASE | MEMIF | DOCKER
+| ... | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -52,6 +53,7 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
| ${osi_layer}= | L2
@@ -83,11 +85,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Start containers for test
| | And Initialize L2 Bridge Domain with memif pairs and VLAN in circular topology
| | ... | ${bd_id1} | ${bd_id2} | ${subid} | ${tag_rewrite}
diff --git a/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr.robot b/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr.robot
index 7a0b8cdfe7..8e1cf61df0 100644
--- a/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr.robot
+++ b/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr.robot
@@ -16,6 +16,7 @@
| ...
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER
+| ... | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -48,6 +49,7 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
| ${osi_layer}= | L2
@@ -75,9 +77,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-eth-l2xcbase-eth-2memif-1dcr-ndrpdr.robot b/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-eth-l2xcbase-eth-2memif-1dcr-ndrpdr.robot
index 314a9b7d4c..b21005bd2e 100644
--- a/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-eth-l2xcbase-eth-2memif-1dcr-ndrpdr.robot
+++ b/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-eth-l2xcbase-eth-2memif-1dcr-ndrpdr.robot
@@ -16,6 +16,7 @@
| ...
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | L2XCFWD | BASE | MEMIF | DOCKER
+| ... | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -48,6 +49,7 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
| ${osi_layer}= | L2
@@ -75,11 +77,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Start containers for test
| | And Initialize L2 xconnect with memif pairs
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-ethip4-ip4base-eth-2memif-1dcr-ndrpdr.robot b/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-ethip4-ip4base-eth-2memif-1dcr-ndrpdr.robot
index 1a37872af0..d14b96b65b 100644
--- a/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-ethip4-ip4base-eth-2memif-1dcr-ndrpdr.robot
+++ b/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-ethip4-ip4base-eth-2memif-1dcr-ndrpdr.robot
@@ -16,6 +16,7 @@
| ...
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | IP4FWD | BASE | MEMIF | DOCKER
+| ... | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -48,6 +49,7 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
| ${osi_layer}= | L3
@@ -75,11 +77,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Start containers for test
| | And Initialize IPv4 routing with memif pairs
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot
index 2910877115..0b9905ee53 100644
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot
@@ -17,7 +17,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_10000
| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE
-| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES
+| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -53,9 +53,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so
| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${58}
| ${tg_if1_ip4}= | 192.168.10.2
| ${dut1_if1_ip4}= | 192.168.10.1
@@ -91,11 +92,12 @@
| | ${encr_alg}= | Crypto Alg AES CBC 128
| | ${auth_alg}= | Integ Alg SHA 256 128
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPSec in 3-node circular topology
| | And VPP IPsec Create Tunnel Interfaces
| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot
index a343996a36..db287f994c 100644
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot
@@ -17,7 +17,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_10000
| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE
-| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES
+| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -53,9 +53,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so
| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${58}
| ${tg_if1_ip4}= | 192.168.10.2
| ${dut1_if1_ip4}= | 192.168.10.1
@@ -91,11 +92,12 @@
| | ${encr_alg}= | Crypto Alg AES CBC 128
| | ${auth_alg}= | Integ Alg SHA 512 256
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPSec in 3-node circular topology
| | And VPP IPsec Create Tunnel Interfaces
| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot
index a9a61c7305..025e4ecd89 100644
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot
@@ -17,7 +17,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_10000
| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE
-| ... | AES_128_GCM | AES
+| ... | AES_128_GCM | AES | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -53,9 +53,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so
| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${54}
| ${tg_if1_ip4}= | 192.168.10.2
| ${dut1_if1_ip4}= | 192.168.10.1
@@ -91,11 +92,12 @@
| | ${encr_alg}= | Crypto Alg AES GCM 128
| | ${auth_alg}= | Set Variable | ${NONE}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPSec in 3-node circular topology
| | And VPP IPsec Create Tunnel Interfaces
| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot
index 95de63cac8..0fafd5a628 100644
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot
@@ -17,7 +17,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_10000
| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE
-| ... | AES_256_GCM | AES
+| ... | AES_256_GCM | AES | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -53,9 +53,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so
| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${54}
| ${tg_if1_ip4}= | 192.168.10.2
| ${dut1_if1_ip4}= | 192.168.10.1
@@ -91,11 +92,12 @@
| | ${encr_alg}= | Crypto Alg AES GCM 256
| | ${auth_alg}= | Set Variable | ${NONE}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPSec in 3-node circular topology
| | And VPP IPsec Create Tunnel Interfaces
| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot
index 295f5198cf..84d1b571cf 100644
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot
@@ -17,7 +17,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | SCALE | NDRPDR
| ... | IP4FWD | IPSEC | IPSECHW | IPSECINT | NIC_Intel-X710 | TNL_1000
-| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES
+| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance | ipsechw
| Suite Teardown | Tear down suite | performance
@@ -53,10 +53,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so
| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
-| ${osi_layer}= | L3
| ${crypto_type}= | HW_DH895xcc
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${58}
| ${tg_if1_ip4}= | 192.168.10.2
| ${dut1_if1_ip4}= | 192.168.10.1
@@ -92,12 +92,14 @@
| | ${encr_alg}= | Crypto Alg AES CBC 128
| | ${auth_alg}= | Integ Alg SHA 256 128
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Add cryptodev to all DUTs | ${phy_cores}
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
+| | And VPP IPsec Select Backend | ${dut1} | ${ipsec_proto} | index=${1}
+| | And VPP IPsec Select Backend | ${dut2} | ${ipsec_proto} | index=${1}
| | And Initialize IPSec in 3-node circular topology
| | And VPP IPsec Create Tunnel Interfaces
| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot
index 981ce29ab0..d90e5f291b 100644
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot
@@ -17,7 +17,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | SCALE | NDRPDR
| ... | IP4FWD | IPSEC | IPSECHW | IPSECINT | NIC_Intel-X710 | TNL_1000
-| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES
+| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance | ipsechw
| Suite Teardown | Tear down suite | performance
@@ -53,10 +53,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so
| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
-| ${osi_layer}= | L3
| ${crypto_type}= | HW_DH895xcc
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${58}
| ${tg_if1_ip4}= | 192.168.10.2
| ${dut1_if1_ip4}= | 192.168.10.1
@@ -92,12 +92,14 @@
| | ${encr_alg}= | Crypto Alg AES CBC 128
| | ${auth_alg}= | Integ Alg SHA 512 256
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Add cryptodev to all DUTs | ${phy_cores}
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
+| | And VPP IPsec Select Backend | ${dut1} | ${ipsec_proto} | index=${1}
+| | And VPP IPsec Select Backend | ${dut2} | ${ipsec_proto} | index=${1}
| | And Initialize IPSec in 3-node circular topology
| | And VPP IPsec Create Tunnel Interfaces
| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-int-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-int-aes128gcm-ndrpdr.robot
index 646ede08b8..a459bfb14d 100644
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-int-aes128gcm-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-int-aes128gcm-ndrpdr.robot
@@ -17,7 +17,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | SCALE | NDRPDR
| ... | IP4FWD | IPSEC | IPSECHW | IPSECINT | NIC_Intel-X710 | TNL_1000
-| ... | AES_128_GCM | AES
+| ... | AES_128_GCM | AES | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance | ipsechw
| Suite Teardown | Tear down suite | performance
@@ -53,10 +53,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so
| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
-| ${osi_layer}= | L3
| ${crypto_type}= | HW_DH895xcc
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${54}
| ${tg_if1_ip4}= | 192.168.10.2
| ${dut1_if1_ip4}= | 192.168.10.1
@@ -93,14 +93,14 @@
| | ${auth_alg}= | Set Variable | ${NONE}
| | ${ipsec_proto}= | IPsec Proto ESP
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Add cryptodev to all DUTs | ${phy_cores}
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And VPP IPsec Select Backend | ${dut1} | ${ipsec_proto} | index=${1}
| | And VPP IPsec Select Backend | ${dut2} | ${ipsec_proto} | index=${1}
-| | When Initialize layer driver | ${nic_driver}
| | And Initialize IPSec in 3-node circular topology
| | And VPP IPsec Create Tunnel Interfaces
| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-int-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-int-aes256gcm-ndrpdr.robot
index f647ab53f0..8cc1c31e78 100644
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-int-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-int-aes256gcm-ndrpdr.robot
@@ -17,7 +17,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | SCALE | NDRPDR
| ... | IP4FWD | IPSEC | IPSECHW | IPSECINT | NIC_Intel-X710 | TNL_1000
-| ... | AES_256_GCM | AES
+| ... | AES_256_GCM | AES | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance | ipsechw
| Suite Teardown | Tear down suite | performance
@@ -53,10 +53,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so
| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
-| ${osi_layer}= | L3
| ${crypto_type}= | HW_DH895xcc
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${54}
| ${tg_if1_ip4}= | 192.168.10.2
| ${dut1_if1_ip4}= | 192.168.10.1
@@ -93,14 +93,14 @@
| | ${auth_alg}= | Set Variable | ${NONE}
| | ${ipsec_proto}= | IPsec Proto ESP
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Add cryptodev to all DUTs | ${phy_cores}
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And VPP IPsec Select Backend | ${dut1} | ${ipsec_proto} | index=${1}
| | And VPP IPsec Select Backend | ${dut2} | ${ipsec_proto} | index=${1}
-| | When Initialize layer driver | ${nic_driver}
| | And Initialize IPSec in 3-node circular topology
| | And VPP IPsec Create Tunnel Interfaces
| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr.robot
index 8bdd5f6078..e9b8c29d28 100644
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr.robot
@@ -17,7 +17,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | SCALE | NDRPDR
| ... | IP4FWD | IPSEC | IPSECHW | IPSECTUN | NIC_Intel-X710 | TNL_1000
-| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES
+| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance | ipsechw
| Suite Teardown | Tear down suite | performance
@@ -53,10 +53,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so
| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
-| ${osi_layer}= | L3
| ${crypto_type}= | HW_DH895xcc
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${58}
| ${tg_if1_ip4}= | 192.168.10.2
| ${dut1_if1_ip4}= | 192.168.10.1
@@ -93,12 +93,14 @@
| | ${encr_alg}= | Crypto Alg AES CBC 128
| | ${auth_alg}= | Integ Alg SHA 256 128
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Add cryptodev to all DUTs | ${phy_cores}
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
+| | And VPP IPsec Select Backend | ${dut1} | ${ipsec_proto} | index=${1}
+| | And VPP IPsec Select Backend | ${dut2} | ${ipsec_proto} | index=${1}
| | And Initialize IPSec in 3-node circular topology
| | And VPP IPsec Add Multiple Tunnels
| | ... | ${nodes} | ${dut1_if2} | ${dut2_if1} | ${n_tunnels}
diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr.robot
index 63bb8fc81f..a1a368e75a 100644
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr.robot
@@ -17,7 +17,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | SCALE | NDRPDR
| ... | IP4FWD | IPSEC | IPSECHW | IPSECTUN | NIC_Intel-X710 | TNL_1000
-| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES
+| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance | ipsechw
| Suite Teardown | Tear down suite | performance
@@ -53,10 +53,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so
| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
-| ${osi_layer}= | L3
| ${crypto_type}= | HW_DH895xcc
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${58}
| ${tg_if1_ip4}= | 192.168.10.2
| ${dut1_if1_ip4}= | 192.168.10.1
@@ -93,12 +93,14 @@
| | ${encr_alg}= | Crypto Alg AES CBC 128
| | ${auth_alg}= | Integ Alg SHA 512 256
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Add cryptodev to all DUTs | ${phy_cores}
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
+| | And VPP IPsec Select Backend | ${dut1} | ${ipsec_proto} | index=${1}
+| | And VPP IPsec Select Backend | ${dut2} | ${ipsec_proto} | index=${1}
| | And Initialize IPSec in 3-node circular topology
| | And VPP IPsec Add Multiple Tunnels
| | ... | ${nodes} | ${dut1_if2} | ${dut2_if1} | ${n_tunnels}
diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-policy-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-policy-aes128gcm-ndrpdr.robot
index 82f4aa1a29..25290a89a9 100644
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-policy-aes128gcm-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-policy-aes128gcm-ndrpdr.robot
@@ -17,7 +17,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | SCALE | NDRPDR
| ... | IP4FWD | IPSEC | IPSECHW | IPSECTUN | NIC_Intel-X710 | TNL_1000
-| ... | AES_128_GCM | AES
+| ... | AES_128_GCM | AES | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance | ipsechw
| Suite Teardown | Tear down suite | performance
@@ -53,10 +53,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so
| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
-| ${osi_layer}= | L3
| ${crypto_type}= | HW_DH895xcc
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${54}
| ${tg_if1_ip4}= | 192.168.10.2
| ${dut1_if1_ip4}= | 192.168.10.1
@@ -93,14 +93,14 @@
| | ${auth_alg}= | Set Variable | ${NONE}
| | ${ipsec_proto}= | IPsec Proto ESP
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Add cryptodev to all DUTs | ${phy_cores}
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And VPP IPsec Select Backend | ${dut1} | ${ipsec_proto} | index=${1}
| | And VPP IPsec Select Backend | ${dut2} | ${ipsec_proto} | index=${1}
-| | When Initialize layer driver | ${nic_driver}
| | And Initialize IPSec in 3-node circular topology
| | And VPP IPsec Add Multiple Tunnels
| | ... | ${nodes} | ${dut1_if2} | ${dut2_if1} | ${n_tunnels}
diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-policy-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-policy-aes256gcm-ndrpdr.robot
index fef0397e99..077597cb41 100644
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-policy-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-policy-aes256gcm-ndrpdr.robot
@@ -17,7 +17,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | SCALE | NDRPDR
| ... | IP4FWD | IPSEC | IPSECHW | IPSECTUN | NIC_Intel-X710 | TNL_1000
-| ... | AES_256_GCM | AES
+| ... | AES_256_GCM | AES | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance | ipsechw
| Suite Teardown | Tear down suite | performance
@@ -53,10 +53,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so
| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
-| ${osi_layer}= | L3
| ${crypto_type}= | HW_DH895xcc
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${54}
| ${tg_if1_ip4}= | 192.168.10.2
| ${dut1_if1_ip4}= | 192.168.10.1
@@ -93,14 +93,14 @@
| | ${auth_alg}= | Set Variable | ${NONE}
| | ${ipsec_proto}= | IPsec Proto ESP
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Add cryptodev to all DUTs | ${phy_cores}
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And VPP IPsec Select Backend | ${dut1} | ${ipsec_proto} | index=${1}
| | And VPP IPsec Select Backend | ${dut2} | ${ipsec_proto} | index=${1}
-| | When Initialize layer driver | ${nic_driver}
| | And Initialize IPSec in 3-node circular topology
| | And VPP IPsec Add Multiple Tunnels
| | ... | ${nodes} | ${dut1_if2} | ${dut2_if1} | ${n_tunnels}
diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot
index c8c8e274e8..137d08df7c 100644
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot
@@ -17,7 +17,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1000
| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE
-| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES
+| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -53,9 +53,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so
| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${58}
| ${tg_if1_ip4}= | 192.168.10.2
| ${dut1_if1_ip4}= | 192.168.10.1
@@ -91,11 +92,12 @@
| | ${encr_alg}= | Crypto Alg AES CBC 128
| | ${auth_alg}= | Integ Alg SHA 256 128
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPSec in 3-node circular topology
| | And VPP IPsec Create Tunnel Interfaces
| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot
index 0af89bdb12..590ed6be68 100644
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot
@@ -17,7 +17,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1000
| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE
-| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES
+| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -53,9 +53,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so
| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${58}
| ${tg_if1_ip4}= | 192.168.10.2
| ${dut1_if1_ip4}= | 192.168.10.1
@@ -91,11 +92,12 @@
| | ${encr_alg}= | Crypto Alg AES CBC 128
| | ${auth_alg}= | Integ Alg SHA 512 256
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPSec in 3-node circular topology
| | And VPP IPsec Create Tunnel Interfaces
| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot
index d0acae2143..1496acb3b5 100644
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot
@@ -17,7 +17,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1000
| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE
-| ... | AES_128_GCM | AES
+| ... | AES_128_GCM | AES | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -53,9 +53,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so
| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${54}
| ${tg_if1_ip4}= | 192.168.10.2
| ${dut1_if1_ip4}= | 192.168.10.1
@@ -92,11 +93,12 @@
| | ${auth_alg}= | Set Variable | ${NONE}
| | ${ipsec_proto} = | IPsec Proto ESP
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPSec in 3-node circular topology
| | And VPP IPsec Create Tunnel Interfaces
| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot
index c14ea1f309..dca71657d9 100644
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot
@@ -17,7 +17,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1000
| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE
-| ... | AES_256_GCM | AES
+| ... | AES_256_GCM | AES | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -53,9 +53,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so
| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${54}
| ${tg_if1_ip4}= | 192.168.10.2
| ${dut1_if1_ip4}= | 192.168.10.1
@@ -92,11 +93,12 @@
| | ${auth_alg}= | Set Variable | ${NONE}
| | ${ipsec_proto} = | IPsec Proto ESP
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPSec in 3-node circular topology
| | And VPP IPsec Create Tunnel Interfaces
| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr.robot
index c520654026..965ad220aa 100644
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr.robot
@@ -17,7 +17,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1000
| ... | IP4FWD | IPSEC | IPSECSW | IPSECTUN | NIC_Intel-X710 | SCALE
-| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES
+| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -53,9 +53,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so
| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${58}
| ${tg_if1_ip4}= | 192.168.10.2
| ${dut1_if1_ip4}= | 192.168.10.1
@@ -94,11 +95,12 @@
| | ${encr_alg}= | Crypto Alg AES CBC 128
| | ${auth_alg}= | Integ Alg SHA 256 128
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPSec in 3-node circular topology
| | And VPP IPsec Add Multiple Tunnels
| | ... | ${nodes} | ${dut1_if2} | ${dut2_if1} | ${n_tunnels}
diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr.robot
index 9d4513e520..6dc3ee89ba 100644
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr.robot
@@ -17,7 +17,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1000
| ... | IP4FWD | IPSEC | IPSECSW | IPSECTUN | NIC_Intel-X710 | SCALE
-| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES
+| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -53,9 +53,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so
| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${58}
| ${tg_if1_ip4}= | 192.168.10.2
| ${dut1_if1_ip4}= | 192.168.10.1
@@ -94,11 +95,12 @@
| | ${encr_alg}= | Crypto Alg AES CBC 128
| | ${auth_alg}= | Integ Alg SHA 512 256
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPSec in 3-node circular topology
| | And VPP IPsec Add Multiple Tunnels
| | ... | ${nodes} | ${dut1_if2} | ${dut2_if1} | ${n_tunnels}
diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-policy-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-policy-aes128gcm-ndrpdr.robot
index e719bd3d76..6085062f67 100644
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-policy-aes128gcm-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-policy-aes128gcm-ndrpdr.robot
@@ -17,7 +17,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1000
| ... | IP4FWD | IPSEC | IPSECSW | IPSECTUN | NIC_Intel-X710 | SCALE
-| ... | AES_128_GCM | AES
+| ... | AES_128_GCM | AES | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -53,9 +53,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so
| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${54}
| ${tg_if1_ip4}= | 192.168.10.2
| ${dut1_if1_ip4}= | 192.168.10.1
@@ -95,11 +96,12 @@
| | ${auth_alg}= | Set Variable | ${NONE}
| | ${ipsec_proto}= | IPsec Proto ESP
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPSec in 3-node circular topology
| | And VPP IPsec Add Multiple Tunnels
| | ... | ${nodes} | ${dut1_if2} | ${dut2_if1} | ${n_tunnels}
diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-policy-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-policy-aes256gcm-ndrpdr.robot
index 6db79ee9ad..1bf48469fd 100644
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-policy-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-policy-aes256gcm-ndrpdr.robot
@@ -17,7 +17,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1000
| ... | IP4FWD | IPSEC | IPSECSW | IPSECTUN | NIC_Intel-X710 | SCALE
-| ... | AES_256_GCM | AES
+| ... | AES_256_GCM | AES | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -53,9 +53,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so
| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${54}
| ${tg_if1_ip4}= | 192.168.10.2
| ${dut1_if1_ip4}= | 192.168.10.1
@@ -95,11 +96,12 @@
| | ${auth_alg}= | Set Variable | ${NONE}
| | ${ipsec_proto}= | IPsec Proto ESP
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPSec in 3-node circular topology
| | And VPP IPsec Add Multiple Tunnels
| | ... | ${nodes} | ${dut1_if2} | ${dut2_if1} | ${n_tunnels}
diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot
index 1152e32ef9..e3b8e7a71f 100644
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot
@@ -17,7 +17,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1
| ... | IP4FWD | IPSEC | IPSECHW | IPSECINT | NIC_Intel-X710 | BASE
-| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES
+| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance | ipsechw
| Suite Teardown | Tear down suite | performance
@@ -53,10 +53,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so
| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
-| ${osi_layer}= | L3
| ${crypto_type}= | HW_DH895xcc
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${58}
| ${tg_if1_ip4}= | 192.168.10.2
| ${dut1_if1_ip4}= | 192.168.10.1
@@ -92,12 +92,14 @@
| | ${encr_alg}= | Crypto Alg AES CBC 128
| | ${auth_alg}= | Integ Alg SHA 256 128
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Add cryptodev to all DUTs | ${phy_cores}
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
+| | And VPP IPsec Select Backend | ${dut1} | ${ipsec_proto} | index=${1}
+| | And VPP IPsec Select Backend | ${dut2} | ${ipsec_proto} | index=${1}
| | And Initialize IPSec in 3-node circular topology
| | And VPP IPsec Create Tunnel Interfaces
| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot
index ae770c1665..4596255125 100644
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot
@@ -17,7 +17,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1
| ... | IP4FWD | IPSEC | IPSECHW | IPSECINT | NIC_Intel-X710 | BASE
-| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES
+| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance | ipsechw
| Suite Teardown | Tear down suite | performance
@@ -53,10 +53,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so
| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
-| ${osi_layer}= | L3
| ${crypto_type}= | HW_DH895xcc
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${58}
| ${tg_if1_ip4}= | 192.168.10.2
| ${dut1_if1_ip4}= | 192.168.10.1
@@ -92,12 +92,14 @@
| | ${encr_alg}= | Crypto Alg AES CBC 128
| | ${auth_alg}= | Integ Alg SHA 512 256
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Add cryptodev to all DUTs | ${phy_cores}
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
+| | And VPP IPsec Select Backend | ${dut1} | ${ipsec_proto} | index=${1}
+| | And VPP IPsec Select Backend | ${dut2} | ${ipsec_proto} | index=${1}
| | And Initialize IPSec in 3-node circular topology
| | And VPP IPsec Create Tunnel Interfaces
| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-int-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-int-aes128gcm-ndrpdr.robot
index 06687e0f9e..51446ca1da 100644
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-int-aes128gcm-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-int-aes128gcm-ndrpdr.robot
@@ -17,7 +17,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1
| ... | IP4FWD | IPSEC | IPSECHW | IPSECINT | NIC_Intel-X710 | BASE
-| ... | AES_128_GCM | AES
+| ... | AES_128_GCM | AES | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance | ipsechw
| Suite Teardown | Tear down suite | performance
@@ -53,10 +53,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so
| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
-| ${osi_layer}= | L3
| ${crypto_type}= | HW_DH895xcc
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${54}
| ${tg_if1_ip4}= | 192.168.10.2
| ${dut1_if1_ip4}= | 192.168.10.1
@@ -93,14 +93,14 @@
| | ${auth_alg}= | Set Variable | ${NONE}
| | ${ipsec_proto}= | IPsec Proto ESP
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Add cryptodev to all DUTs | ${phy_cores}
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And VPP IPsec Select Backend | ${dut1} | ${ipsec_proto} | index=${1}
| | And VPP IPsec Select Backend | ${dut2} | ${ipsec_proto} | index=${1}
-| | When Initialize layer driver | ${nic_driver}
| | And Initialize IPSec in 3-node circular topology
| | And VPP IPsec Create Tunnel Interfaces
| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-int-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-int-aes256gcm-ndrpdr.robot
index 39a90d73bc..ab16567408 100644
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-int-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-int-aes256gcm-ndrpdr.robot
@@ -17,7 +17,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1
| ... | IP4FWD | IPSEC | IPSECHW | IPSECINT | NIC_Intel-X710 | BASE
-| ... | AES_256_GCM | AES
+| ... | AES_256_GCM | AES | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance | ipsechw
| Suite Teardown | Tear down suite | performance
@@ -53,10 +53,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so
| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
-| ${osi_layer}= | L3
| ${crypto_type}= | HW_DH895xcc
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${54}
| ${tg_if1_ip4}= | 192.168.10.2
| ${dut1_if1_ip4}= | 192.168.10.1
@@ -93,14 +93,14 @@
| | ${auth_alg}= | Set Variable | ${NONE}
| | ${ipsec_proto}= | IPsec Proto ESP
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Add cryptodev to all DUTs | ${phy_cores}
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And VPP IPsec Select Backend | ${dut1} | ${ipsec_proto} | index=${1}
| | And VPP IPsec Select Backend | ${dut2} | ${ipsec_proto} | index=${1}
-| | When Initialize layer driver | ${nic_driver}
| | And Initialize IPSec in 3-node circular topology
| | And VPP IPsec Create Tunnel Interfaces
| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr.robot
index 410d0f2249..cc2d2e4d4f 100644
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr.robot
@@ -17,7 +17,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1
| ... | IP4FWD | IPSEC | IPSECHW | IPSECTUN | NIC_Intel-X710 | BASE |
-| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES
+| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance | ipsechw
| Suite Teardown | Tear down suite | performance
@@ -52,10 +52,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so
| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
-| ${osi_layer}= | L3
| ${crypto_type}= | HW_DH895xcc
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${58}
| ${tg_if1_ip4}= | 192.168.10.2
| ${dut1_if1_ip4}= | 192.168.10.1
@@ -92,12 +92,14 @@
| | ${encr_alg}= | Crypto Alg AES CBC 128
| | ${auth_alg}= | Integ Alg SHA 256 128
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Add cryptodev to all DUTs | ${phy_cores}
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
+| | And VPP IPsec Select Backend | ${dut1} | ${ipsec_proto} | index=${1}
+| | And VPP IPsec Select Backend | ${dut2} | ${ipsec_proto} | index=${1}
| | And Initialize IPSec in 3-node circular topology
| | And VPP IPsec Add Multiple Tunnels
| | ... | ${nodes} | ${dut1_if2} | ${dut2_if1} | ${n_tunnels}
diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr.robot
index 503b034ab9..18341b7c0a 100644
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr.robot
@@ -17,7 +17,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1
| ... | IP4FWD | IPSEC | IPSECHW | IPSECTUN | NIC_Intel-X710 | BASE |
-| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES
+| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance | ipsechw
| Suite Teardown | Tear down suite | performance
@@ -52,10 +52,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so
| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
-| ${osi_layer}= | L3
| ${crypto_type}= | HW_DH895xcc
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${58}
| ${tg_if1_ip4}= | 192.168.10.2
| ${dut1_if1_ip4}= | 192.168.10.1
@@ -92,12 +92,14 @@
| | ${encr_alg}= | Crypto Alg AES CBC 128
| | ${auth_alg}= | Integ Alg SHA 512 256
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Add cryptodev to all DUTs | ${phy_cores}
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
+| | And VPP IPsec Select Backend | ${dut1} | ${ipsec_proto} | index=${1}
+| | And VPP IPsec Select Backend | ${dut2} | ${ipsec_proto} | index=${1}
| | And Initialize IPSec in 3-node circular topology
| | And VPP IPsec Add Multiple Tunnels
| | ... | ${nodes} | ${dut1_if2} | ${dut2_if1} | ${n_tunnels}
diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-policy-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-policy-aes128gcm-ndrpdr.robot
index 066a7704dc..aac023c408 100644
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-policy-aes128gcm-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-policy-aes128gcm-ndrpdr.robot
@@ -17,7 +17,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1
| ... | IP4FWD | IPSEC | IPSECHW | IPSECTUN | NIC_Intel-X710 | BASE
-| ... | AES_128_GCM | AES
+| ... | AES_128_GCM | AES | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance | ipsechw
| Suite Teardown | Tear down suite | performance
@@ -53,10 +53,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so
| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
-| ${osi_layer}= | L3
| ${crypto_type}= | HW_DH895xcc
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${54}
| ${tg_if1_ip4}= | 192.168.10.2
| ${dut1_if1_ip4}= | 192.168.10.1
@@ -93,14 +93,14 @@
| | ${auth_alg}= | Set Variable | ${NONE}
| | ${ipsec_proto}= | IPsec Proto ESP
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Add cryptodev to all DUTs | ${phy_cores}
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And VPP IPsec Select Backend | ${dut1} | ${ipsec_proto} | index=${1}
| | And VPP IPsec Select Backend | ${dut2} | ${ipsec_proto} | index=${1}
-| | When Initialize layer driver | ${nic_driver}
| | And Initialize IPSec in 3-node circular topology
| | And VPP IPsec Add Multiple Tunnels
| | ... | ${nodes} | ${dut1_if2} | ${dut2_if1} | ${n_tunnels}
diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-policy-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-policy-aes256gcm-ndrpdr.robot
index 54e00e2c1b..e697d3187e 100644
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-policy-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-policy-aes256gcm-ndrpdr.robot
@@ -17,7 +17,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1
| ... | IP4FWD | IPSEC | IPSECHW | IPSECTUN | NIC_Intel-X710 | BASE
-| ... | AES_256_GCM | AES
+| ... | AES_256_GCM | AES | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance | ipsechw
| Suite Teardown | Tear down suite | performance
@@ -53,10 +53,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so
| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
-| ${osi_layer}= | L3
| ${crypto_type}= | HW_DH895xcc
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${54}
| ${tg_if1_ip4}= | 192.168.10.2
| ${dut1_if1_ip4}= | 192.168.10.1
@@ -93,14 +93,14 @@
| | ${auth_alg}= | Set Variable | ${NONE}
| | ${ipsec_proto}= | IPsec Proto ESP
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Add cryptodev to all DUTs | ${phy_cores}
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And VPP IPsec Select Backend | ${dut1} | ${ipsec_proto} | index=${1}
| | And VPP IPsec Select Backend | ${dut2} | ${ipsec_proto} | index=${1}
-| | When Initialize layer driver | ${nic_driver}
| | And Initialize IPSec in 3-node circular topology
| | And VPP IPsec Add Multiple Tunnels
| | ... | ${nodes} | ${dut1_if2} | ${dut2_if1} | ${n_tunnels}
diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot
index 048cd74f24..3586b7a4c0 100644
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot
@@ -17,7 +17,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1
| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | BASE
-| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES
+| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -53,9 +53,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so
| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${58}
| ${tg_if1_ip4}= | 192.168.10.2
| ${dut1_if1_ip4}= | 192.168.10.1
@@ -91,11 +92,12 @@
| | ${encr_alg}= | Crypto Alg AES CBC 128
| | ${auth_alg}= | Integ Alg SHA 256 128
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPSec in 3-node circular topology
| | And VPP IPsec Create Tunnel Interfaces
| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot
index 9914769388..6c6c4215d3 100644
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot
@@ -17,7 +17,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1
| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | BASE
-| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES
+| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -53,9 +53,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so
| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${58}
| ${tg_if1_ip4}= | 192.168.10.2
| ${dut1_if1_ip4}= | 192.168.10.1
@@ -91,11 +92,12 @@
| | ${encr_alg}= | Crypto Alg AES CBC 128
| | ${auth_alg}= | Integ Alg SHA 512 256
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPSec in 3-node circular topology
| | And VPP IPsec Create Tunnel Interfaces
| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128gcm-ndrpdr.robot
index 4b9b27b231..018991dfc1 100644
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128gcm-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128gcm-ndrpdr.robot
@@ -17,7 +17,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1
| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | BASE
-| ... | AES_128_GCM | AES
+| ... | AES_128_GCM | AES | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -53,9 +53,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so
| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${54}
| ${tg_if1_ip4}= | 192.168.10.2
| ${dut1_if1_ip4}= | 192.168.10.1
@@ -92,11 +93,12 @@
| | ${auth_alg} = | Set Variable | ${NONE}
| | ${ipsec_proto} = | IPsec Proto ESP
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPSec in 3-node circular topology
| | And VPP IPsec Create Tunnel Interfaces
| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes256gcm-ndrpdr.robot
index 9c52849a07..b13328add0 100644
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes256gcm-ndrpdr.robot
@@ -17,7 +17,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1
| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | BASE
-| ... | AES_256_GCM | AES
+| ... | AES_256_GCM | AES | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -53,9 +53,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so
| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${54}
| ${tg_if1_ip4}= | 192.168.10.2
| ${dut1_if1_ip4}= | 192.168.10.1
@@ -92,11 +93,12 @@
| | ${auth_alg} = | Set Variable | ${NONE}
| | ${ipsec_proto} = | IPsec Proto ESP
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPSec in 3-node circular topology
| | And VPP IPsec Create Tunnel Interfaces
| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr.robot
index c93a8046a1..3a0b964ee5 100644
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr.robot
@@ -17,7 +17,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1
| ... | IP4FWD | IPSEC | IPSECSW | IPSECTUN | NIC_Intel-X710 | BASE
-| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES
+| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -53,9 +53,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so
| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${58}
| ${tg_if1_ip4}= | 192.168.10.2
| ${dut1_if1_ip4}= | 192.168.10.1
@@ -81,10 +82,7 @@
| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
| | ... | Type: integer, string
| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - search_type - NDR or PDR. Type: string
| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| | ... | - min_rate - Min rate for binary search, default value: ${50000}.
-| | ... | Type: integer
| | ...
| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
| | ...
@@ -94,11 +92,12 @@
| | ${encr_alg}= | Crypto Alg AES CBC 128
| | ${auth_alg}= | Integ Alg SHA 256 128
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPSec in 3-node circular topology
| | And VPP IPsec Add Multiple Tunnels
| | ... | ${nodes} | ${dut1_if2} | ${dut2_if1} | ${n_tunnels}
diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr.robot
index 8d1e1e5d99..c431a137ba 100644
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr.robot
@@ -17,7 +17,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1
| ... | IP4FWD | IPSEC | IPSECSW | IPSECTUN | NIC_Intel-X710 | BASE
-| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES
+| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -53,9 +53,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so
| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${58}
| ${tg_if1_ip4}= | 192.168.10.2
| ${dut1_if1_ip4}= | 192.168.10.1
@@ -81,10 +82,7 @@
| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
| | ... | Type: integer, string
| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - search_type - NDR or PDR. Type: string
| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| | ... | - min_rate - Min rate for binary search, default value: ${50000}.
-| | ... | Type: integer
| | ...
| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
| | ...
@@ -94,11 +92,12 @@
| | ${encr_alg}= | Crypto Alg AES CBC 128
| | ${auth_alg}= | Integ Alg SHA 512 256
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPSec in 3-node circular topology
| | And VPP IPsec Add Multiple Tunnels
| | ... | ${nodes} | ${dut1_if2} | ${dut2_if1} | ${n_tunnels}
diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-policy-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-policy-aes128gcm-ndrpdr.robot
index c45341d763..75650dbd33 100644
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-policy-aes128gcm-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-policy-aes128gcm-ndrpdr.robot
@@ -17,7 +17,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1
| ... | IP4FWD | IPSEC | IPSECSW | IPSECTUN | NIC_Intel-X710 | BASE
-| ... | AES_128_GCM | AES
+| ... | AES_128_GCM | AES | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -53,9 +53,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so
| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${54}
| ${tg_if1_ip4}= | 192.168.10.2
| ${dut1_if1_ip4}= | 192.168.10.1
@@ -81,10 +82,7 @@
| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
| | ... | Type: integer, string
| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - search_type - NDR or PDR. Type: string
| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| | ... | - min_rate - Min rate for binary search, default value: ${50000}.
-| | ... | Type: integer
| | ...
| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
| | ...
@@ -95,11 +93,12 @@
| | ${auth_alg}= | Set Variable | ${NONE}
| | ${ipsec_proto}= | IPsec Proto ESP
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
-| | When Initialize layer driver | ${nic_driver}
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply Startup configuration on all VPP DUTs
+| | And Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPSec in 3-node circular topology
| | And VPP IPsec Add Multiple Tunnels
| | ... | ${nodes} | ${dut1_if2} | ${dut2_if1} | ${n_tunnels}
diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-policy-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-policy-aes256gcm-ndrpdr.robot
index 551c3f3779..7ce41364c0 100644
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-policy-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-policy-aes256gcm-ndrpdr.robot
@@ -17,7 +17,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1
| ... | IP4FWD | IPSEC | IPSECSW | IPSECTUN | NIC_Intel-X710 | BASE
-| ... | AES_256_GCM | AES
+| ... | AES_256_GCM | AES | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -53,9 +53,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so
| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${54}
| ${tg_if1_ip4}= | 192.168.10.2
| ${dut1_if1_ip4}= | 192.168.10.1
@@ -81,10 +82,7 @@
| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
| | ... | Type: integer, string
| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - search_type - NDR or PDR. Type: string
| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| | ... | - min_rate - Min rate for binary search, default value: ${50000}.
-| | ... | Type: integer
| | ...
| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
| | ...
@@ -95,11 +93,12 @@
| | ${auth_alg}= | Set Variable | ${NONE}
| | ${ipsec_proto}= | IPsec Proto ESP
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPSec in 3-node circular topology
| | And VPP IPsec Add Multiple Tunnels
| | ... | ${nodes} | ${dut1_if2} | ${dut2_if1} | ${n_tunnels}
diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec20000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec20000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot
index 1c7d4c3f83..12d1bda7a4 100644
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec20000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec20000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot
@@ -17,7 +17,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_20000
| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE
-| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES
+| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -53,9 +53,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so
| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${54}
| ${tg_if1_ip4}= | 192.168.10.2
| ${dut1_if1_ip4}= | 192.168.10.1
@@ -91,11 +92,12 @@
| | ${encr_alg}= | Crypto Alg AES CBC 128
| | ${auth_alg}= | Set Variable | ${NONE}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPSec in 3-node circular topology
| | And VPP IPsec Create Tunnel Interfaces
| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec20000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec20000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot
index 384b4f0d47..fd09efdd20 100644
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec20000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec20000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot
@@ -17,7 +17,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_20000
| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE
-| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES
+| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -53,9 +53,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so
| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${54}
| ${tg_if1_ip4}= | 192.168.10.2
| ${dut1_if1_ip4}= | 192.168.10.1
@@ -91,11 +92,12 @@
| | ${encr_alg}= | Crypto Alg AES CBC 128
| | ${auth_alg}= | Set Variable | ${NONE}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPSec in 3-node circular topology
| | And VPP IPsec Create Tunnel Interfaces
| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec20000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec20000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot
index 4d2b85024e..71180cfee0 100644
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec20000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec20000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot
@@ -17,7 +17,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_20000
| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE
-| ... | AES_128_GCM | AES
+| ... | AES_128_GCM | AES | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -53,9 +53,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so
| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${54}
| ${tg_if1_ip4}= | 192.168.10.2
| ${dut1_if1_ip4}= | 192.168.10.1
@@ -91,11 +92,12 @@
| | ${encr_alg}= | Crypto Alg AES GCM 128
| | ${auth_alg}= | Set Variable | ${NONE}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPSec in 3-node circular topology
| | And VPP IPsec Create Tunnel Interfaces
| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec20000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec20000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot
index e0fbb0f88d..d91ea1983a 100644
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec20000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec20000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot
@@ -17,7 +17,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_20000
| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE
-| ... | AES_256_GCM | AES
+| ... | AES_256_GCM | AES | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -53,9 +53,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so
| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${54}
| ${tg_if1_ip4}= | 192.168.10.2
| ${dut1_if1_ip4}= | 192.168.10.1
@@ -91,11 +92,12 @@
| | ${encr_alg}= | Crypto Alg AES GCM 256
| | ${auth_alg}= | Set Variable | ${NONE}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPSec in 3-node circular topology
| | And VPP IPsec Create Tunnel Interfaces
| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot
index e8ee80eff5..b8bec7dfea 100644
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot
@@ -17,7 +17,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_40000
| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE
-| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES
+| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -53,9 +53,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so
| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${54}
| ${tg_if1_ip4}= | 192.168.10.2
| ${dut1_if1_ip4}= | 192.168.10.1
@@ -91,11 +92,12 @@
| | ${encr_alg}= | Crypto Alg AES CBC 128
| | ${auth_alg}= | Integ Alg SHA 256 128
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPSec in 3-node circular topology
| | And VPP IPsec Create Tunnel Interfaces
| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot
index f4870617cf..06a69f111a 100644
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot
@@ -17,7 +17,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_40000
| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE
-| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES
+| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -53,9 +53,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so
| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${54}
| ${tg_if1_ip4}= | 192.168.10.2
| ${dut1_if1_ip4}= | 192.168.10.1
@@ -91,11 +92,12 @@
| | ${encr_alg}= | Crypto Alg AES CBC 128
| | ${auth_alg}= | Integ Alg SHA 512 256
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPSec in 3-node circular topology
| | And VPP IPsec Create Tunnel Interfaces
| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot
index f09cf6bcdf..2b23460c06 100644
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot
@@ -17,7 +17,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_40000
| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE
-| ... | AES_128_GCM | AES
+| ... | AES_128_GCM | AES | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -53,9 +53,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so
| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${54}
| ${tg_if1_ip4}= | 192.168.10.2
| ${dut1_if1_ip4}= | 192.168.10.1
@@ -92,11 +93,12 @@
| | ${auth_alg}= | Set Variable | ${NONE}
| | ${ipsec_proto} = | IPsec Proto ESP
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPSec in 3-node circular topology
| | And VPP IPsec Create Tunnel Interfaces
| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot
index 3942e78dde..37340785f1 100644
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot
@@ -17,7 +17,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_40000
| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE
-| ... | AES_256_GCM | AES
+| ... | AES_256_GCM | AES | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -53,9 +53,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so
| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${54}
| ${tg_if1_ip4}= | 192.168.10.2
| ${dut1_if1_ip4}= | 192.168.10.1
@@ -92,11 +93,12 @@
| | ${auth_alg}= | Set Variable | ${NONE}
| | ${ipsec_proto} = | IPsec Proto ESP
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPSec in 3-node circular topology
| | And VPP IPsec Create Tunnel Interfaces
| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec400tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec400tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot
index 00cf2b087d..15e8a2a926 100644
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec400tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec400tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot
@@ -17,7 +17,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_400
| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE
-| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES
+| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -53,9 +53,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so
| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${58}
| ${tg_if1_ip4}= | 192.168.10.2
| ${dut1_if1_ip4}= | 192.168.10.1
@@ -91,11 +92,12 @@
| | ${encr_alg}= | Crypto Alg AES CBC 128
| | ${auth_alg}= | Integ Alg SHA 256 128
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPSec in 3-node circular topology
| | And VPP IPsec Create Tunnel Interfaces
| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec400tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec400tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot
index 07e99fb089..a7223eb141 100644
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec400tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec400tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot
@@ -17,7 +17,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_400
| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE
-| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES
+| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -53,9 +53,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so
| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${58}
| ${tg_if1_ip4}= | 192.168.10.2
| ${dut1_if1_ip4}= | 192.168.10.1
@@ -91,11 +92,12 @@
| | ${encr_alg}= | Crypto Alg AES CBC 128
| | ${auth_alg}= | Integ Alg SHA 512 256
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPSec in 3-node circular topology
| | And VPP IPsec Create Tunnel Interfaces
| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec400tnlsw-ip4base-int-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec400tnlsw-ip4base-int-aes128gcm-ndrpdr.robot
index 910e721168..1e6c442f76 100644
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec400tnlsw-ip4base-int-aes128gcm-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec400tnlsw-ip4base-int-aes128gcm-ndrpdr.robot
@@ -17,7 +17,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_400
| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE
-| ... | AES_128_GCM | AES
+| ... | AES_128_GCM | AES | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -53,9 +53,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so
| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${54}
| ${tg_if1_ip4}= | 192.168.10.2
| ${dut1_if1_ip4}= | 192.168.10.1
@@ -92,11 +93,12 @@
| | ${auth_alg}= | Set Variable | ${NONE}
| | ${ipsec_proto} = | IPsec Proto ESP
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPSec in 3-node circular topology
| | And VPP IPsec Create Tunnel Interfaces
| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec400tnlsw-ip4base-int-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec400tnlsw-ip4base-int-aes256gcm-ndrpdr.robot
index 363ac74656..055541ce9a 100644
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec400tnlsw-ip4base-int-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec400tnlsw-ip4base-int-aes256gcm-ndrpdr.robot
@@ -17,7 +17,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_400
| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE
-| ... | AES_256_GCM | AES
+| ... | AES_256_GCM | AES | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -53,9 +53,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so
| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${54}
| ${tg_if1_ip4}= | 192.168.10.2
| ${dut1_if1_ip4}= | 192.168.10.1
@@ -92,11 +93,12 @@
| | ${auth_alg}= | Set Variable | ${NONE}
| | ${ipsec_proto} = | IPsec Proto ESP
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPSec in 3-node circular topology
| | And VPP IPsec Create Tunnel Interfaces
| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot
index 65c94dfe9f..31be8facdc 100644
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot
@@ -17,7 +17,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_40
| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE
-| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES
+| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -53,9 +53,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so
| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${58}
| ${tg_if1_ip4}= | 192.168.10.2
| ${dut1_if1_ip4}= | 192.168.10.1
@@ -91,11 +92,12 @@
| | ${encr_alg}= | Crypto Alg AES CBC 128
| | ${auth_alg}= | Integ Alg SHA 256 128
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPSec in 3-node circular topology
| | And VPP IPsec Create Tunnel Interfaces
| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot
index 1d25f2298e..8501b7787a 100644
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot
@@ -17,7 +17,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_40
| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE
-| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES
+| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -53,9 +53,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so
| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${58}
| ${tg_if1_ip4}= | 192.168.10.2
| ${dut1_if1_ip4}= | 192.168.10.1
@@ -91,11 +92,12 @@
| | ${encr_alg}= | Crypto Alg AES CBC 128
| | ${auth_alg}= | Integ Alg SHA 512 256
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPSec in 3-node circular topology
| | And VPP IPsec Create Tunnel Interfaces
| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128gcm-ndrpdr.robot
index 2e54a8c41b..29a4db5b22 100644
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128gcm-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128gcm-ndrpdr.robot
@@ -17,7 +17,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_40
| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE
-| ... | AES_128_GCM | AES
+| ... | AES_128_GCM | AES | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -53,9 +53,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so
| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${54}
| ${tg_if1_ip4}= | 192.168.10.2
| ${dut1_if1_ip4}= | 192.168.10.1
@@ -92,11 +93,12 @@
| | ${auth_alg}= | Set Variable | ${NONE}
| | ${ipsec_proto} = | IPsec Proto ESP
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPSec in 3-node circular topology
| | And VPP IPsec Create Tunnel Interfaces
| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes256gcm-ndrpdr.robot
index 95e03b26af..aead875a13 100644
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes256gcm-ndrpdr.robot
@@ -17,7 +17,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_40
| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE
-| ... | AES_256_GCM | AES
+| ... | AES_256_GCM | AES | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -53,9 +53,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so
| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${54}
| ${tg_if1_ip4}= | 192.168.10.2
| ${dut1_if1_ip4}= | 192.168.10.1
@@ -92,11 +93,12 @@
| | ${auth_alg}= | Set Variable | ${NONE}
| | ${ipsec_proto} = | IPsec Proto ESP
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPSec in 3-node circular topology
| | And VPP IPsec Create Tunnel Interfaces
| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot
index 4916d495c3..a232781e29 100644
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot
@@ -17,7 +17,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_4
| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE
-| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES
+| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -53,9 +53,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so
| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${58}
| ${tg_if1_ip4}= | 192.168.10.2
| ${dut1_if1_ip4}= | 192.168.10.1
@@ -91,11 +92,12 @@
| | ${encr_alg}= | Crypto Alg AES CBC 128
| | ${auth_alg}= | Integ Alg SHA 256 128
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPSec in 3-node circular topology
| | And VPP IPsec Create Tunnel Interfaces
| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot
index a9c46a0f7e..629766182e 100644
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot
@@ -17,7 +17,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_4
| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE
-| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES
+| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -53,9 +53,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so
| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${58}
| ${tg_if1_ip4}= | 192.168.10.2
| ${dut1_if1_ip4}= | 192.168.10.1
@@ -91,11 +92,12 @@
| | ${encr_alg}= | Crypto Alg AES CBC 128
| | ${auth_alg}= | Integ Alg SHA 512 256
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPSec in 3-node circular topology
| | And VPP IPsec Create Tunnel Interfaces
| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128gcm-ndrpdr.robot
index 6737de460a..c3e46c74a7 100644
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128gcm-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128gcm-ndrpdr.robot
@@ -17,7 +17,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_4
| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE
-| ... | AES_128_GCM | AES
+| ... | AES_128_GCM | AES | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -53,9 +53,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so
| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${54}
| ${tg_if1_ip4}= | 192.168.10.2
| ${dut1_if1_ip4}= | 192.168.10.1
@@ -92,11 +93,12 @@
| | ${auth_alg}= | Set Variable | ${NONE}
| | ${ipsec_proto} = | IPsec Proto ESP
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPSec in 3-node circular topology
| | And VPP IPsec Create Tunnel Interfaces
| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes256gcm-ndrpdr.robot
index 344c05e76d..4b58e4d06e 100644
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes256gcm-ndrpdr.robot
@@ -17,7 +17,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_4
| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE
-| ... | AES_256_GCM | AES
+| ... | AES_256_GCM | AES | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -53,9 +53,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so
| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${54}
| ${tg_if1_ip4}= | 192.168.10.2
| ${dut1_if1_ip4}= | 192.168.10.1
@@ -92,11 +93,12 @@
| | ${auth_alg}= | Set Variable | ${NONE}
| | ${ipsec_proto} = | IPsec Proto ESP
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPSec in 3-node circular topology
| | And VPP IPsec Create Tunnel Interfaces
| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot
index f64cf84caf..f000e78e3f 100644
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot
@@ -17,7 +17,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_5000
| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE
-| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES
+| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -53,9 +53,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so
| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${58}
| ${tg_if1_ip4}= | 192.168.10.2
| ${dut1_if1_ip4}= | 192.168.10.1
@@ -91,11 +92,12 @@
| | ${encr_alg}= | Crypto Alg AES CBC 128
| | ${auth_alg}= | Integ Alg SHA 256 128
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPSec in 3-node circular topology
| | And VPP IPsec Create Tunnel Interfaces
| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot
index 4b3880b077..3b42be5715 100644
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot
@@ -17,7 +17,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_5000
| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE
-| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES
+| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -53,9 +53,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so
| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${58}
| ${tg_if1_ip4}= | 192.168.10.2
| ${dut1_if1_ip4}= | 192.168.10.1
@@ -91,11 +92,12 @@
| | ${encr_alg}= | Crypto Alg AES CBC 128
| | ${auth_alg}= | Integ Alg SHA 512 256
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPSec in 3-node circular topology
| | And VPP IPsec Create Tunnel Interfaces
| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot
index 4b597ba011..85f9a667db 100644
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot
@@ -17,7 +17,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_5000
| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE
-| ... | AES_128_GCM | AES
+| ... | AES_128_GCM | AES | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -53,9 +53,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so
| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${54}
| ${tg_if1_ip4}= | 192.168.10.2
| ${dut1_if1_ip4}= | 192.168.10.1
@@ -91,11 +92,12 @@
| | ${encr_alg}= | Crypto Alg AES GCM 128
| | ${auth_alg}= | Set Variable | ${NONE}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPSec in 3-node circular topology
| | And VPP IPsec Create Tunnel Interfaces
| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot
index 0cc1f17085..b671996041 100644
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot
@@ -17,7 +17,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_5000
| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE
-| ... | AES_256_GCM | AES
+| ... | AES_256_GCM | AES | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -53,9 +53,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so
| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${54}
| ${tg_if1_ip4}= | 192.168.10.2
| ${dut1_if1_ip4}= | 192.168.10.1
@@ -91,11 +92,12 @@
| | ${encr_alg}= | Crypto Alg AES GCM 256
| | ${auth_alg}= | Set Variable | ${NONE}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPSec in 3-node circular topology
| | And VPP IPsec Create Tunnel Interfaces
| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec60000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec60000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot
index f29e52e4ad..2106d70520 100644
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec60000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec60000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot
@@ -17,7 +17,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_60000
| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE
-| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES
+| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -53,9 +53,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so
| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${54}
| ${tg_if1_ip4}= | 192.168.10.2
| ${dut1_if1_ip4}= | 192.168.10.1
@@ -91,11 +92,12 @@
| | ${encr_alg}= | Crypto Alg AES CBC 128
| | ${auth_alg}= | Integ Alg SHA 256 128
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPSec in 3-node circular topology
| | And VPP IPsec Create Tunnel Interfaces
| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec60000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec60000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot
index 7b9bd0847c..9ae28050fa 100644
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec60000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec60000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot
@@ -17,7 +17,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_60000
| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE
-| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES
+| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -53,9 +53,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so
| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${54}
| ${tg_if1_ip4}= | 192.168.10.2
| ${dut1_if1_ip4}= | 192.168.10.1
@@ -91,11 +92,12 @@
| | ${encr_alg}= | Crypto Alg AES CBC 128
| | ${auth_alg}= | Integ Alg SHA 512 256
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPSec in 3-node circular topology
| | And VPP IPsec Create Tunnel Interfaces
| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec60000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec60000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot
index d1e58f13f0..134fd14cb7 100644
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec60000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec60000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot
@@ -17,7 +17,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_60000
| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE
-| ... | AES_128_GCM | AES
+| ... | AES_128_GCM | AES | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -53,9 +53,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so
| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${54}
| ${tg_if1_ip4}= | 192.168.10.2
| ${dut1_if1_ip4}= | 192.168.10.1
@@ -92,11 +93,12 @@
| | ${auth_alg}= | Set Variable | ${NONE}
| | ${ipsec_proto} = | IPsec Proto ESP
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPSec in 3-node circular topology
| | And VPP IPsec Create Tunnel Interfaces
| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec60000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec60000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot
index bb7dd4d765..aac71a0066 100644
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec60000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec60000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot
@@ -17,7 +17,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_60000
| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE
-| ... | AES_256_GCM | AES
+| ... | AES_256_GCM | AES | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -53,9 +53,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so
| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${54}
| ${tg_if1_ip4}= | 192.168.10.2
| ${dut1_if1_ip4}= | 192.168.10.1
@@ -92,11 +93,12 @@
| | ${auth_alg}= | Set Variable | ${NONE}
| | ${ipsec_proto} = | IPsec Proto ESP
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPSec in 3-node circular topology
| | And VPP IPsec Create Tunnel Interfaces
| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsectptlispgpe-ip4base-aes128cbc-hmac256sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsectptlispgpe-ip4base-aes128cbc-hmac256sha-ndrpdr.robot
index e7c31254cc..5b2431b28c 100644
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsectptlispgpe-ip4base-aes128cbc-hmac256sha-ndrpdr.robot
+++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsectptlispgpe-ip4base-aes128cbc-hmac256sha-ndrpdr.robot
@@ -19,7 +19,7 @@
| Variables | resources/test_data/lisp/performance/lisp_static_adjacency.py
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | IP4FWD
| ... | LISPGPE | IPSEC | IPSECHW | IPSECTRAN | ENCAP | IP4UNRLAY | IP4OVRLAY
-| ... | NIC_Intel-X710 | AES_128_CBC | HMAC_SHA_256 | HMAC | AES
+| ... | NIC_Intel-X710 | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -57,10 +57,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so
| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
-| ${osi_layer}= | L3
| ${crypto_type}= | HW_DH895xcc
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${58}
| ${dut2_spi}= | ${1000}
| ${dut1_spi}= | ${1001}
@@ -95,12 +95,12 @@
| | ${encr_alg}= | Crypto Alg AES CBC 128
| | ${auth_alg}= | Integ Alg SHA 256 128
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Add cryptodev to all DUTs | ${phy_cores}
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg}
| | And Initialize LISP GPE IPv4 over IPsec in 3-node circular topology
| | ... | ${encr_alg} | ${auth_alg}
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-avf-dot1q-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-avf-dot1q-ip4base-ndrpdr.robot
index ea891fd960..458d803f17 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-avf-dot1q-ip4base-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-avf-dot1q-ip4base-ndrpdr.robot
@@ -18,7 +18,7 @@
| ... | NIC_Intel-X710 | ETH | IP4FWD | BASE | DOT1Q | IP4BASE | DRV_AVF
| ...
| Suite Setup | Setup suite single link | performance_avf
-| Suite Teardown | Tear down suite | performance | vifs
+| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test
| Test Teardown | Tear down test | performance
| ...
@@ -48,10 +48,11 @@
| ... | *[Ref] Applicable standard specifications:* RFC2544.
*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so | avf_plugin.so
-| ${osi_layer}= | L3
+| @{plugins_to_enable}= | avf_plugin.so
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | avf
+| ${osi_layer}= | L3
| ${overhead}= | ${4}
| ${subid}= | 10
| ${tag_rewrite}= | pop-1
@@ -78,11 +79,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add DPDK no PCI to all DUTs
-| | And Set Max Rate And Jumbo
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv4 forwarding with VLAN dot1q sub-interfaces in circular topology
| | ... | ${tg_if1_net} | ${tg_if2_net} | ${subid} | ${tag_rewrite}
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-avf-eth-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-avf-eth-ip4base-ndrpdr.robot
index 6d239ef7ae..1c674be08c 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-avf-eth-ip4base-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-avf-eth-ip4base-ndrpdr.robot
@@ -18,7 +18,7 @@
| ... | NIC_Intel-X710 | ETH | IP4FWD | BASE | IP4BASE | DRV_AVF
| ...
| Suite Setup | Setup suite single link | performance_avf
-| Suite Teardown | Tear down suite | performance | vifs
+| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test
| Test Teardown | Tear down test | performance
| ...
@@ -45,10 +45,11 @@
| ... | *[Ref] Applicable standard specifications:* RFC2544.
*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so | avf_plugin.so
-| ${osi_layer}= | L3
+| @{plugins_to_enable}= | avf_plugin.so
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | avf
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
# Traffic profile:
| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src253
@@ -70,11 +71,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add DPDK no PCI to all DUTs
-| | And Set Max Rate And Jumbo
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv4 forwarding in circular topology
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-avf-ethip4-ip4scale200k-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-avf-ethip4-ip4scale200k-ndrpdr.robot
index 3e16fdc1d9..8e390b1e67 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-avf-ethip4-ip4scale200k-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-avf-ethip4-ip4scale200k-ndrpdr.robot
@@ -18,7 +18,7 @@
| ... | NIC_Intel-X710 | ETH | IP4FWD | SCALE | FIB_200K | DRV_AVF
| ...
| Suite Setup | Setup suite single link | performance_avf
-| Suite Teardown | Tear down suite | performance | vifs
+| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test
| Test Teardown | Tear down test | performance
| ...
@@ -45,10 +45,11 @@
| ... | *[Ref] Applicable standard specifications:* RFC2544.
*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so | avf_plugin.so
-| ${osi_layer}= | L3
+| @{plugins_to_enable}= | avf_plugin.so
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | avf
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${rts_per_flow}= | ${100000}
# Traffic profile:
@@ -72,11 +73,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add DPDK no PCI to all DUTs
-| | And Set Max Rate And Jumbo
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv4 forwarding with scaling in circular topology
| | ... | ${rts_per_flow}
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-avf-ethip4-ip4scale20k-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-avf-ethip4-ip4scale20k-ndrpdr.robot
index 95d63d49ab..69c057a857 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-avf-ethip4-ip4scale20k-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-avf-ethip4-ip4scale20k-ndrpdr.robot
@@ -18,7 +18,7 @@
| ... | NIC_Intel-X710 | ETH | IP4FWD | SCALE | FIB_20K | DRV_AVF
| ...
| Suite Setup | Setup suite single link | performance_avf
-| Suite Teardown | Tear down suite | performance | vifs
+| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test
| Test Teardown | Tear down test | performance
| ...
@@ -45,10 +45,11 @@
| ... | *[Ref] Applicable standard specifications:* RFC2544.
*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so | avf_plugin.so
-| ${osi_layer}= | L3
+| @{plugins_to_enable}= | avf_plugin.so
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | avf
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${rts_per_flow}= | ${10000}
# Traffic profile:
@@ -72,11 +73,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add DPDK no PCI to all DUTs
-| | And Set Max Rate And Jumbo
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv4 forwarding with scaling in circular topology
| | ... | ${rts_per_flow}
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-avf-ethip4-ip4scale2m-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-avf-ethip4-ip4scale2m-ndrpdr.robot
index 3813edc59c..0b8e1b3ab1 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-avf-ethip4-ip4scale2m-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-avf-ethip4-ip4scale2m-ndrpdr.robot
@@ -18,7 +18,7 @@
| ... | NIC_Intel-X710 | ETH | IP4FWD | SCALE | FIB_2M | DRV_AVF
| ...
| Suite Setup | Setup suite single link | performance_avf
-| Suite Teardown | Tear down suite | performance | vifs
+| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test
| Test Teardown | Tear down test | performance
| ...
@@ -45,10 +45,11 @@
| ... | *[Ref] Applicable standard specifications:* RFC2544.
*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so | avf_plugin.so
-| ${osi_layer}= | L3
+| @{plugins_to_enable}= | avf_plugin.so
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | avf
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${rts_per_flow}= | ${1000000}
# Traffic profile:
@@ -72,11 +73,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add DPDK no PCI to all DUTs
-| | And Set Max Rate And Jumbo
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv4 forwarding with scaling in circular topology
| | ... | ${rts_per_flow}
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-dot1q-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-dot1q-ip4base-ndrpdr.robot
index 95a3a24cb8..ac57e127e2 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-dot1q-ip4base-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-dot1q-ip4base-ndrpdr.robot
@@ -15,7 +15,7 @@
| Resource | resources/libraries/robot/shared/default.robot
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | IP4FWD | BASE | DOT1Q | IP4BASE
+| ... | NIC_Intel-X710 | ETH | IP4FWD | BASE | DOT1Q | IP4BASE | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -49,9 +49,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${4}
| ${subid}= | 10
| ${tag_rewrite}= | pop-1
@@ -78,11 +79,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv4 forwarding with VLAN dot1q sub-interfaces in circular topology
| | ... | ${tg_if1_net} | ${tg_if2_net} | ${subid} | ${tag_rewrite}
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-copwhtlistbase-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-copwhtlistbase-ndrpdr.robot
index ac8c58338d..23c2c7aa29 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-copwhtlistbase-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-copwhtlistbase-ndrpdr.robot
@@ -15,7 +15,7 @@
| Resource | resources/libraries/robot/shared/default.robot
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | COPWHLIST
+| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | COPWHLIST | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -47,9 +47,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
# Traffic profile:
| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src253
@@ -71,11 +72,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv4 forwarding in circular topology
| | And Add Fib Table | ${dut1} | 1
| | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=1 | local=${TRUE}
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-iacldstbase-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-iacldstbase-ndrpdr.robot
index 90ffb67b10..2bbbf3a8ea 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-iacldstbase-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-iacldstbase-ndrpdr.robot
@@ -15,7 +15,7 @@
| Resource | resources/libraries/robot/shared/default.robot
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | IACLDST
+| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | IACLDST | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -47,9 +47,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
# Traffic profile:
| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src253
@@ -71,11 +72,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv4 forwarding in circular topology
| | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3
| | ... | ${dut1} | ip4 | dst | 255.255.255.0
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-ipolicemarkbase-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-ipolicemarkbase-ndrpdr.robot
index 58f8aa5dff..6f8cd34d10 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-ipolicemarkbase-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-ipolicemarkbase-ndrpdr.robot
@@ -16,7 +16,7 @@
| Library | resources.libraries.python.Policer
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | IP4FWD | FEATURE | POLICE_MARK
+| ... | NIC_Intel-X710 | IP4FWD | FEATURE | POLICE_MARK | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -48,9 +48,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${cir}= | ${100}
| ${eir}= | ${150}
@@ -77,11 +78,12 @@
| | Set Test Variable | \${cb} | ${frame_size}
| | Set Test Variable | \${eb} | ${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv4 forwarding in circular topology
| | And Initialize IPv4 policer 2r3c-'ca' in circular topology
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-ndrpdr.robot
index 408ab742cc..d73f1229f0 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-ndrpdr.robot
@@ -15,7 +15,7 @@
| Resource | resources/libraries/robot/shared/default.robot
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | IP4FWD | BASE | IP4BASE
+| ... | NIC_Intel-X710 | ETH | IP4FWD | BASE | IP4BASE | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -46,9 +46,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
# Traffic profile:
| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src253
@@ -71,11 +72,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv4 forwarding in circular topology
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale200k-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale200k-ndrpdr.robot
index 6c465caca9..0ad036d756 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale200k-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale200k-ndrpdr.robot
@@ -15,7 +15,7 @@
| Resource | resources/libraries/robot/shared/default.robot
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | IP4FWD | SCALE | FIB_200K
+| ... | NIC_Intel-X710 | ETH | IP4FWD | SCALE | FIB_200K | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -46,9 +46,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${rts_per_flow}= | ${100000}
# Traffic profile:
@@ -72,11 +73,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv4 forwarding with scaling in circular topology
| | ... | ${rts_per_flow}
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale20k-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale20k-ndrpdr.robot
index 3d485d82f7..e44536ea2e 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale20k-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale20k-ndrpdr.robot
@@ -15,7 +15,7 @@
| Resource | resources/libraries/robot/shared/default.robot
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | IP4FWD | SCALE | FIB_20K
+| ... | NIC_Intel-X710 | ETH | IP4FWD | SCALE | FIB_20K | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -46,9 +46,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${rts_per_flow}= | ${10000}
# Traffic profile:
@@ -72,11 +73,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv4 forwarding with scaling in circular topology
| | ... | ${rts_per_flow}
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale2m-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale2m-ndrpdr.robot
index 9fb8fe258d..1b4f86e821 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale2m-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale2m-ndrpdr.robot
@@ -15,7 +15,7 @@
| Resource | resources/libraries/robot/shared/default.robot
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | IP4FWD | SCALE | FIB_2M
+| ... | NIC_Intel-X710 | ETH | IP4FWD | SCALE | FIB_2M | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -46,9 +46,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${rts_per_flow}= | ${1000000}
# Traffic profile:
@@ -72,11 +73,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv4 forwarding with scaling in circular topology
| | ... | ${rts_per_flow}
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-100flows-ndrpdr.robot
index 499478c43b..d9ef17a436 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-100flows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-100flows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATEFUL
-| ... | IACL | ACL10 | 100_FLOWS
+| ... | IACL | ACL10 | 100_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -48,9 +48,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit+reflect
@@ -72,7 +73,7 @@
*** Keywords ***
| Local Template
-| | [Documentation] | FIXME.
+| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing config.
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
@@ -87,11 +88,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
| | ... | ${ip_nr}
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-100kflows-ndrpdr.robot
index 624bd3aa7b..22f3013603 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-100kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-100kflows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATEFUL
-| ... | IACL | ACL10 | 100K_FLOWS
+| ... | IACL | ACL10 | 100K_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -48,9 +48,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit+reflect
@@ -72,7 +73,7 @@
*** Keywords ***
| Local Template
-| | [Documentation] | FIXME.
+| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing config.
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
@@ -87,11 +88,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
| | ... | ${ip_nr}
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-10kflows-ndrpdr.robot
index ffd5768b29..59958af3fc 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-10kflows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATEFUL
-| ... | IACL | ACL10 | 10K_FLOWS
+| ... | IACL | ACL10 | 10K_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -48,9 +48,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit+reflect
@@ -72,7 +73,7 @@
*** Keywords ***
| Local Template
-| | [Documentation] | FIXME.
+| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing config.
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
@@ -87,11 +88,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
| | ... | ${ip_nr}
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-100flows-ndrpdr.robot
index 9a17f8c974..528c3dd496 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-100flows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-100flows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATELESS
-| ... | IACL | ACL10 | 100_FLOWS
+| ... | IACL | ACL10 | 100_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -48,9 +48,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit
@@ -72,7 +73,7 @@
*** Keywords ***
| Local Template
-| | [Documentation] | FIXME.
+| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing config.
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
@@ -87,11 +88,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
| | ... | ${ip_nr}
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-100kflows-ndrpdr.robot
index cbc8432827..d1a34589da 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-100kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-100kflows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATELESS
-| ... | IACL | ACL10 | 100K_FLOWS
+| ... | IACL | ACL10 | 100K_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -48,9 +48,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit
@@ -72,7 +73,7 @@
*** Keywords ***
| Local Template
-| | [Documentation] | FIXME.
+| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing config.
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
@@ -87,11 +88,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
| | ... | ${ip_nr}
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-10kflows-ndrpdr.robot
index a3e467e04d..47364ad625 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-10kflows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATELESS
-| ... | IACL | ACL10 | 10K_FLOWS
+| ... | IACL | ACL10 | 10K_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -48,9 +48,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit
@@ -72,7 +73,7 @@
*** Keywords ***
| Local Template
-| | [Documentation] | FIXME.
+| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing config.
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
@@ -87,11 +88,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
| | ... | ${ip_nr}
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-100flows-ndrpdr.robot
index e444f0f083..5e9eef1c5e 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-100flows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-100flows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATEFUL
-| ... | IACL | ACL1 | 100_FLOWS
+| ... | IACL | ACL1 | 100_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -48,9 +48,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit+reflect
@@ -72,7 +73,7 @@
*** Keywords ***
| Local Template
-| | [Documentation] | FIXME.
+| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing config.
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
@@ -87,11 +88,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
| | ... | ${ip_nr}
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-100kflows-ndrpdr.robot
index 1e14af8b3f..1a0b3c431b 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-100kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-100kflows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATEFUL
-| ... | IACL | ACL1 | 100K_FLOWS
+| ... | IACL | ACL1 | 100K_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -48,9 +48,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit+reflect
@@ -72,7 +73,7 @@
*** Keywords ***
| Local Template
-| | [Documentation] | FIXME.
+| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing config.
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
@@ -87,11 +88,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
| | ... | ${ip_nr}
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-10kflows-ndrpdr.robot
index 66997c1fdc..b56d5fced3 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-10kflows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATEFUL
-| ... | IACL | ACL1 | 10K_FLOWS
+| ... | IACL | ACL1 | 10K_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -48,9 +48,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit+reflect
@@ -88,11 +89,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
| | ... | ${ip_nr}
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-100flows-ndrpdr.robot
index 7d25ff770c..014d631512 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-100flows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-100flows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATELESS
-| ... | IACL | ACL1 | 100_FLOWS
+| ... | IACL | ACL1 | 100_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -48,9 +48,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit
@@ -72,7 +73,7 @@
*** Keywords ***
| Local Template
-| | [Documentation] | FIXME.
+| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing config.
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
@@ -87,11 +88,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
| | ... | ${ip_nr}
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-100kflows-ndrpdr.robot
index 3d86088c2f..7c7d7cfd79 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-100kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-100kflows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATELESS
-| ... | IACL | ACL1 | 100K_FLOWS
+| ... | IACL | ACL1 | 100K_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -48,9 +48,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${ip_nr}= | ${100}
# ACL test setup
@@ -72,7 +73,7 @@
*** Keywords ***
| Local Template
-| | [Documentation] | FIXME.
+| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing config.
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
@@ -87,11 +88,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
| | ... | ${ip_nr}
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-10kflows-ndrpdr.robot
index 34b5498042..86bb72223c 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-10kflows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATELESS
-| ... | IACL | ACL1 | 10K_FLOWS
+| ... | IACL | ACL1 | 10K_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -48,9 +48,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit
@@ -88,11 +89,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
| | ... | ${ip_nr}
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-100flows-ndrpdr.robot
index 7323167e85..b59a578cad 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-100flows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-100flows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATEFUL
-| ... | IACL | ACL50 | 100_FLOWS
+| ... | IACL | ACL50 | 100_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -48,9 +48,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit+reflect
@@ -72,7 +73,7 @@
*** Keywords ***
| Local Template
-| | [Documentation] | FIXME.
+| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing config.
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
@@ -87,11 +88,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
| | ... | ${ip_nr}
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-100kflows-ndrpdr.robot
index 11da0998d2..dc14b9b4f7 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-100kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-100kflows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATEFUL
-| ... | IACL | ACL50 | 100K_FLOWS
+| ... | IACL | ACL50 | 100K_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -48,9 +48,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit+reflect
@@ -72,7 +73,7 @@
*** Keywords ***
| Local Template
-| | [Documentation] | FIXME.
+| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing config.
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
@@ -87,11 +88,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
| | ... | ${ip_nr}
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdr.robot
index c22eb73392..652689d89c 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATEFUL
-| ... | IACL | ACL50 | 10K_FLOWS
+| ... | IACL | ACL50 | 10K_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -48,9 +48,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit+reflect
@@ -88,11 +89,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
| | ... | ${ip_nr}
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-100flows-ndrpdr.robot
index 5a82ff00ed..934b6453d3 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-100flows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-100flows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATELESS
-| ... | IACL | ACL50 | 100_FLOWS
+| ... | IACL | ACL50 | 100_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -48,9 +48,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit
@@ -72,7 +73,7 @@
*** Keywords ***
| Local Template
-| | [Documentation] | FIXME.
+| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing config.
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
@@ -87,11 +88,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
| | ... | ${ip_nr}
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-100kflows-ndrpdr.robot
index 9058996bee..913df5142b 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-100kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-100kflows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATELESS
-| ... | IACL | ACL50 | 100K_FLOWS
+| ... | IACL | ACL50 | 100K_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -48,9 +48,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit
@@ -72,7 +73,7 @@
*** Keywords ***
| Local Template
-| | [Documentation] | FIXME.
+| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing config.
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
@@ -87,11 +88,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
| | ... | ${ip_nr}
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdr.robot
index eec8247e29..f366f7e140 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATELESS
-| ... | IACL | ACL50 | 10K_FLOWS
+| ... | IACL | ACL50 | 10K_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -48,9 +48,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit
@@ -88,11 +89,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
| | ... | ${ip_nr}
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-nat44-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-nat44-ndrpdr.robot
index 4ce93086ca..61a9b2d4e7 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-nat44-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-nat44-ndrpdr.robot
@@ -17,7 +17,7 @@
| Resource | resources/libraries/robot/shared/traffic.robot
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | NAT44 | BASE
+| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | NAT44 | BASE | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -48,9 +48,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | nat_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
# Traffic profile:
| ${traffic_profile}= | trex-sl-3n-ethip4udp-1u1p
@@ -73,12 +74,13 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Add NAT to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize NAT44 in circular topology
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-100flows-ndrpdr.robot
index 8284b6cfdf..ecc31963dd 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-100flows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-100flows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATEFUL
-| ... | OACL | ACL10 | 100_FLOWS
+| ... | OACL | ACL10 | 100_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -48,9 +48,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit+reflect
@@ -72,7 +73,7 @@
*** Keywords ***
| Local Template
-| | [Documentation] | FIXME.
+| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing config.
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
@@ -87,11 +88,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
| | ... | ${ip_nr}
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-100kflows-ndrpdr.robot
index 75e6f8545d..807358f270 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-100kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-100kflows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATEFUL
-| ... | OACL | ACL10 | 100K_FLOWS
+| ... | OACL | ACL10 | 100K_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -48,9 +48,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit+reflect
@@ -72,7 +73,7 @@
*** Keywords ***
| Local Template
-| | [Documentation] | FIXME.
+| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing config.
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
@@ -87,11 +88,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
| | ... | ${ip_nr}
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-10kflows-ndrpdr.robot
index f9deb9f49c..85d286dd45 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-10kflows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATEFUL
-| ... | OACL | ACL10 | 10K_FLOWS
+| ... | OACL | ACL10 | 10K_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -48,9 +48,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit+reflect
@@ -72,7 +73,7 @@
*** Keywords ***
| Local Template
-| | [Documentation] | FIXME.
+| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing config.
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
@@ -87,11 +88,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
| | ... | ${ip_nr}
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-100flows-ndrpdr.robot
index 188e99756c..06198e943c 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-100flows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-100flows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATELESS
-| ... | OACL | ACL10 | 100_FLOWS
+| ... | OACL | ACL10 | 100_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -48,9 +48,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit
@@ -72,7 +73,7 @@
*** Keywords ***
| Local Template
-| | [Documentation] | FIXME.
+| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing config.
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
@@ -87,11 +88,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
| | ... | ${ip_nr}
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-100kflows-ndrpdr.robot
index 46d3d8183a..deeafc9500 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-100kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-100kflows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATELESS
-| ... | OACL | ACL10 | 100K_FLOWS
+| ... | OACL | ACL10 | 100K_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -48,9 +48,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit
@@ -72,7 +73,7 @@
*** Keywords ***
| Local Template
-| | [Documentation] | FIXME.
+| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing config.
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
@@ -87,11 +88,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
| | ... | ${ip_nr}
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-10kflows-ndrpdr.robot
index 4a901bdab1..acd7c8778d 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-10kflows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATELESS
-| ... | OACL | ACL10 | 10K_FLOWS
+| ... | OACL | ACL10 | 10K_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -48,9 +48,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit
@@ -72,7 +73,7 @@
*** Keywords ***
| Local Template
-| | [Documentation] | FIXME.
+| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing config.
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
@@ -87,11 +88,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
| | ... | ${ip_nr}
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-100flows-ndrpdr.robot
index 475418138c..9e36cc0306 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-100flows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-100flows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATEFUL
-| ... | OACL | ACL1 | 100_FLOWS
+| ... | OACL | ACL1 | 100_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -48,9 +48,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit+reflect
@@ -72,7 +73,7 @@
*** Keywords ***
| Local Template
-| | [Documentation] | FIXME.
+| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing config.
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
@@ -87,11 +88,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
| | ... | ${ip_nr}
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-100kflows-ndrpdr.robot
index a345e3140f..a36cd5c295 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-100kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-100kflows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATEFUL
-| ... | OACL | ACL1 | 100K_FLOWS
+| ... | OACL | ACL1 | 100K_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -48,9 +48,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit+reflect
@@ -72,7 +73,7 @@
*** Keywords ***
| Local Template
-| | [Documentation] | FIXME.
+| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing config.
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
@@ -87,11 +88,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
| | ... | ${ip_nr}
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-10kflows-ndrpdr.robot
index 182bbd38e4..88b94d219e 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-10kflows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATEFUL
-| ... | OACL | ACL1 | 10K_FLOWS
+| ... | OACL | ACL1 | 10K_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -48,9 +48,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit+reflect
@@ -72,7 +73,7 @@
*** Keywords ***
| Local Template
-| | [Documentation] | FIXME.
+| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing config.
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
@@ -87,11 +88,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
| | ... | ${ip_nr}
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-100flows-ndrpdr.robot
index 60391be0fa..f125e82ced 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-100flows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-100flows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATELESS
-| ... | OACL | ACL1 | 100_FLOWS
+| ... | OACL | ACL1 | 100_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -48,9 +48,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit
@@ -72,7 +73,7 @@
*** Keywords ***
| Local Template
-| | [Documentation] | FIXME.
+| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing config.
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
@@ -87,11 +88,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
| | ... | ${ip_nr}
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-100kflows-ndrpdr.robot
index 864333647b..02dffe36bb 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-100kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-100kflows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATELESS
-| ... | OACL | ACL1 | 100K_FLOWS
+| ... | OACL | ACL1 | 100K_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -48,9 +48,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit
@@ -72,7 +73,7 @@
*** Keywords ***
| Local Template
-| | [Documentation] | FIXME.
+| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing config.
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
@@ -87,11 +88,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
| | ... | ${ip_nr}
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-10kflows-ndrpdr.robot
index b06819df0f..ea8c079296 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-10kflows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATELESS
-| ... | OACL | ACL1 | 10K_FLOWS
+| ... | OACL | ACL1 | 10K_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -48,9 +48,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit
@@ -72,7 +73,7 @@
*** Keywords ***
| Local Template
-| | [Documentation] | FIXME.
+| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing config.
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
@@ -87,11 +88,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
| | ... | ${ip_nr}
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-100flows-ndrpdr.robot
index 976726527d..0484f1cf9d 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-100flows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-100flows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATEFUL
-| ... | OACL | ACL50 | 100_FLOWS
+| ... | OACL | ACL50 | 100_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -48,9 +48,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit+reflect
@@ -72,7 +73,7 @@
*** Keywords ***
| Local Template
-| | [Documentation] | FIXME.
+| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing config.
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
@@ -87,11 +88,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
| | ... | ${ip_nr}
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-100kflows-ndrpdr.robot
index 1702f1f047..c9aba09d8a 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-100kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-100kflows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATEFUL
-| ... | OACL | ACL50 | 100K_FLOWS
+| ... | OACL | ACL50 | 100K_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -48,9 +48,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit+reflect
@@ -72,7 +73,7 @@
*** Keywords ***
| Local Template
-| | [Documentation] | FIXME.
+| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing config.
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
@@ -87,11 +88,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
| | ... | ${ip_nr}
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-10kflows-ndrpdr.robot
index d606479e11..43fd243a88 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-10kflows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATEFUL
-| ... | OACL | ACL50 | 10K_FLOWS
+| ... | OACL | ACL50 | 10K_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -48,9 +48,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit+reflect
@@ -72,7 +73,7 @@
*** Keywords ***
| Local Template
-| | [Documentation] | FIXME.
+| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing config.
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
@@ -87,11 +88,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
| | ... | ${ip_nr}
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-100flows-ndrpdr.robot
index 37a30775b8..1048118144 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-100flows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-100flows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATELESS
-| ... | OACL | ACL50 | 100_FLOWS
+| ... | OACL | ACL50 | 100_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -48,9 +48,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit
@@ -72,7 +73,7 @@
*** Keywords ***
| Local Template
-| | [Documentation] | FIXME.
+| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing config.
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
@@ -87,11 +88,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
| | ... | ${ip_nr}
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-100kflows-ndrpdr.robot
index 2a899b7a78..997b680c0e 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-100kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-100kflows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATELESS
-| ... | OACL | ACL50 | 100K_FLOWS
+| ... | OACL | ACL50 | 100K_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -48,9 +48,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit
@@ -72,7 +73,7 @@
*** Keywords ***
| Local Template
-| | [Documentation] | FIXME.
+| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing config.
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
@@ -87,11 +88,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
| | ... | ${ip_nr}
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-10kflows-ndrpdr.robot
index eaa84a374f..854dbac89f 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-10kflows-ndrpdr.robot
@@ -48,9 +48,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit
@@ -72,7 +73,7 @@
*** Keywords ***
| Local Template
-| | [Documentation] | FIXME.
+| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing config.
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
@@ -87,11 +88,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
| | ... | ${ip_nr}
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-udpsrcscale15-nat44-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-udpsrcscale15-nat44-ndrpdr.robot
index e3e267f13e..6231328d25 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-udpsrcscale15-nat44-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-udpsrcscale15-nat44-ndrpdr.robot
@@ -13,11 +13,10 @@
*** Settings ***
| Resource | resources/libraries/robot/shared/default.robot
-| Resource | resources/libraries/robot/ip/nat.robot
-| Resource | resources/libraries/robot/shared/traffic.robot
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | NAT44 | BASE | SRC_USER_1
+| ... | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -49,16 +48,17 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | nat_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
# Traffic profile:
| ${traffic_profile}= | trex-sl-3n-ethip4udp-1u15p
*** Keywords ***
| Local Template
-| | [Documentation] | FIXME.
+| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing config.
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
@@ -73,12 +73,13 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Add NAT to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize NAT44 in circular topology
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale10-udpsrcscale15-nat44-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale10-udpsrcscale15-nat44-ndrpdr.robot
index c1c081e0ff..c3bcb033e6 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale10-udpsrcscale15-nat44-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale10-udpsrcscale15-nat44-ndrpdr.robot
@@ -13,12 +13,10 @@
*** Settings ***
| Resource | resources/libraries/robot/shared/default.robot
-| Resource | resources/libraries/robot/ip/nat.robot
-| Resource | resources/libraries/robot/shared/traffic.robot
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | NAT44 | SRC_USER_10
-| ... | SCALE
+| ... | SCALE | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -50,16 +48,17 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | nat_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
# Traffic profile:
| ${traffic_profile}= | trex-sl-3n-ethip4udp-10u15p
*** Keywords ***
| Local Template
-| | [Documentation] | FIXME.
+| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing config.
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
@@ -74,12 +73,13 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Add NAT to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize NAT44 in circular topology
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale100-udpsrcscale15-nat44-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale100-udpsrcscale15-nat44-ndrpdr.robot
index e74d204c2b..d0fa9e3a3e 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale100-udpsrcscale15-nat44-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale100-udpsrcscale15-nat44-ndrpdr.robot
@@ -13,12 +13,10 @@
*** Settings ***
| Resource | resources/libraries/robot/shared/default.robot
-| Resource | resources/libraries/robot/ip/nat.robot
-| Resource | resources/libraries/robot/shared/traffic.robot
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | NAT44 | SRC_USER_100
-| ... | SCALE
+| ... | SCALE | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -50,16 +48,17 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | nat_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
# Traffic profile:
| ${traffic_profile}= | trex-sl-3n-ethip4udp-100u15p
*** Keywords ***
| Local Template
-| | [Documentation] | FIXME.
+| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing config.
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
@@ -74,12 +73,13 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Add NAT to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize NAT44 in circular topology
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale1000-udpsrcscale15-nat44-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale1000-udpsrcscale15-nat44-ndrpdr.robot
index 85c68c5998..96a1e78946 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale1000-udpsrcscale15-nat44-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale1000-udpsrcscale15-nat44-ndrpdr.robot
@@ -13,12 +13,10 @@
*** Settings ***
| Resource | resources/libraries/robot/shared/default.robot
-| Resource | resources/libraries/robot/ip/nat.robot
-| Resource | resources/libraries/robot/shared/traffic.robot
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | NAT44 | SRC_USER_1000
-| ... | SCALE
+| ... | SCALE | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -49,9 +47,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | nat_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
# Traffic profile:
| ${traffic_profile}= | trex-sl-3n-ethip4udp-1000u15p
@@ -74,12 +73,13 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Add NAT to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize NAT44 in circular topology
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale2000-udpsrcscale15-nat44-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale2000-udpsrcscale15-nat44-ndrpdr.robot
index d9ef112ff7..e54597ab71 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale2000-udpsrcscale15-nat44-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale2000-udpsrcscale15-nat44-ndrpdr.robot
@@ -13,12 +13,10 @@
*** Settings ***
| Resource | resources/libraries/robot/shared/default.robot
-| Resource | resources/libraries/robot/ip/nat.robot
-| Resource | resources/libraries/robot/shared/traffic.robot
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | NAT44 | SRC_USER_2000
-| ... | SCALE
+| ... | SCALE | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -50,16 +48,17 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | nat_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
# Traffic profile:
| ${traffic_profile}= | trex-sl-3n-ethip4udp-2000u15p
*** Keywords ***
| Local Template
-| | [Documentation] | FIXME.
+| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing config.
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
@@ -74,12 +73,13 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Add NAT to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize NAT44 in circular topology
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale4000-udpsrcscale15-nat44-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale4000-udpsrcscale15-nat44-ndrpdr.robot
index 78d2aab602..5f088c9af6 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale4000-udpsrcscale15-nat44-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale4000-udpsrcscale15-nat44-ndrpdr.robot
@@ -13,12 +13,10 @@
*** Settings ***
| Resource | resources/libraries/robot/shared/default.robot
-| Resource | resources/libraries/robot/ip/nat.robot
-| Resource | resources/libraries/robot/shared/traffic.robot
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | NAT44 | SRC_USER_4000
-| ... | SCALE
+| ... | SCALE | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -59,7 +57,7 @@
*** Keywords ***
| Local Template
-| | [Documentation] | FIXME.
+| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing config.
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
@@ -74,12 +72,13 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Add NAT to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize NAT44 in circular topology
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-avf-dot1q-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-avf-dot1q-ip4base-ndrpdr.robot
index d5ac16656e..e9bde213c9 100644
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-avf-dot1q-ip4base-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-avf-dot1q-ip4base-ndrpdr.robot
@@ -18,7 +18,7 @@
| ... | NIC_Intel-X710 | ETH | IP4FWD | BASE | DOT1Q | IP4BASE | DRV_AVF
| ...
| Suite Setup | Setup suite single link | performance_avf
-| Suite Teardown | Tear down suite | performance | vifs
+| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test
| Test Teardown | Tear down test | performance
| ...
@@ -48,10 +48,11 @@
| ... | *[Ref] Applicable standard specifications:* RFC2544.
*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so | avf_plugin.so
-| ${osi_layer}= | L3
+| @{plugins_to_enable}= | avf_plugin.so
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | avf
+| ${osi_layer}= | L3
| ${overhead}= | ${4}
| ${subid}= | 10
| ${tag_rewrite}= | pop-1
@@ -78,11 +79,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add DPDK no PCI to all DUTs
-| | And Set Max Rate And Jumbo
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv4 forwarding with VLAN dot1q sub-interfaces in circular topology
| | ... | ${tg_if1_net} | ${tg_if2_net} | ${subid} | ${tag_rewrite}
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-avf-ethip4-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-avf-ethip4-ip4base-ndrpdr.robot
index 9b149c8512..cee94c2ff4 100644
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-avf-ethip4-ip4base-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-avf-ethip4-ip4base-ndrpdr.robot
@@ -18,7 +18,7 @@
| ... | NIC_Intel-X710 | ETH | IP4FWD | BASE | IP4BASE | DRV_AVF
| ...
| Suite Setup | Setup suite single link | performance_avf
-| Suite Teardown | Tear down suite | performance | vifs
+| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test
| Test Teardown | Tear down test | performance
| ...
@@ -45,10 +45,11 @@
| ... | *[Ref] Applicable standard specifications:* RFC2544.
*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so | avf_plugin.so
-| ${osi_layer}= | L3
+| @{plugins_to_enable}= | avf_plugin.so
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | avf
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n-ethip4-ip4src253
@@ -70,11 +71,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add DPDK no PCI to all DUTs
-| | And Set Max Rate And Jumbo
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv4 forwarding in circular topology
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-avf-ethip4-ip4scale200k-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-avf-ethip4-ip4scale200k-ndrpdr.robot
index 69df2c4fd2..e1f374d6c7 100644
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-avf-ethip4-ip4scale200k-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-avf-ethip4-ip4scale200k-ndrpdr.robot
@@ -18,7 +18,7 @@
| ... | NIC_Intel-X710 | ETH | IP4FWD | SCALE | FIB_200k | DRV_AVF
| ...
| Suite Setup | Setup suite single link | performance_avf
-| Suite Teardown | Tear down suite | performance | vifs
+| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test
| Test Teardown | Tear down test | performance
| ...
@@ -45,10 +45,11 @@
| ... | *[Ref] Applicable standard specifications:* RFC2544.
*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so | avf_plugin.so
-| ${osi_layer}= | L3
+| @{plugins_to_enable}= | avf_plugin.so
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | avf
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${rts_per_flow}= | ${100000}
# Traffic profile:
@@ -72,11 +73,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add DPDK no PCI to all DUTs
-| | And Set Max Rate And Jumbo
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv4 forwarding with scaling in circular topology
| | ... | ${rts_per_flow}
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-avf-ethip4-ip4scale20k-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-avf-ethip4-ip4scale20k-ndrpdr.robot
index 4db460a8d3..0423a28ee3 100644
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-avf-ethip4-ip4scale20k-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-avf-ethip4-ip4scale20k-ndrpdr.robot
@@ -18,7 +18,7 @@
| ... | NIC_Intel-X710 | ETH | IP4FWD | SCALE | FIB_20k | DRV_AVF
| ...
| Suite Setup | Setup suite single link | performance_avf
-| Suite Teardown | Tear down suite | performance | vifs
+| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test
| Test Teardown | Tear down test | performance
| ...
@@ -45,10 +45,11 @@
| ... | *[Ref] Applicable standard specifications:* RFC2544.
*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so | avf_plugin.so
-| ${osi_layer}= | L3
+| @{plugins_to_enable}= | avf_plugin.so
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | avf
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${rts_per_flow}= | ${10000}
# Traffic profile:
@@ -72,11 +73,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add DPDK no PCI to all DUTs
-| | And Set Max Rate And Jumbo
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv4 forwarding with scaling in circular topology
| | ... | ${rts_per_flow}
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-avf-ethip4-ip4scale2m-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-avf-ethip4-ip4scale2m-ndrpdr.robot
index 03fa8384ad..918e1d85a4 100644
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-avf-ethip4-ip4scale2m-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-avf-ethip4-ip4scale2m-ndrpdr.robot
@@ -18,7 +18,7 @@
| ... | NIC_Intel-X710 | ETH | IP4FWD | SCALE | FIB_2M | DRV_AVF
| ...
| Suite Setup | Setup suite single link | performance_avf
-| Suite Teardown | Tear down suite | performance | vifs
+| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test
| Test Teardown | Tear down test | performance
| ...
@@ -45,10 +45,11 @@
| ... | *[Ref] Applicable standard specifications:* RFC2544.
*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so | avf_plugin.so
-| ${osi_layer}= | L3
+| @{plugins_to_enable}= | avf_plugin.so
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | avf
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${rts_per_flow}= | ${1000000}
# Traffic profile:
@@ -72,11 +73,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add DPDK no PCI to all DUTs
-| | And Set Max Rate And Jumbo
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv4 forwarding with scaling in circular topology
| | ... | ${rts_per_flow}
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-dot1q-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-dot1q-ip4base-ndrpdr.robot
index d6f7c25c1c..d4a6342eb5 100644
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-dot1q-ip4base-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-dot1q-ip4base-ndrpdr.robot
@@ -15,7 +15,7 @@
| Resource | resources/libraries/robot/shared/default.robot
| ...
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | IP4FWD | BASE | DOT1Q | IP4BASE
+| ... | NIC_Intel-X710 | ETH | IP4FWD | BASE | DOT1Q | IP4BASE | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -48,9 +48,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${4}
| ${subid}= | 10
| ${tag_rewrite}= | pop-1
@@ -77,11 +78,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv4 forwarding with VLAN dot1q sub-interfaces in circular topology
| | ... | ${tg_if1_net} | ${tg_if2_net} | ${subid} | ${tag_rewrite}
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-copwhtlistbase-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-copwhtlistbase-ndrpdr.robot
index 7a168aaf83..0b280537dd 100644
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-copwhtlistbase-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-copwhtlistbase-ndrpdr.robot
@@ -15,7 +15,7 @@
| Resource | resources/libraries/robot/shared/default.robot
| ...
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | COPWHLIST
+| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | COPWHLIST | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -47,9 +47,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n-ethip4-ip4src253
@@ -71,11 +72,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv4 forwarding in circular topology
| | And Add Fib Table | ${dut1} | 1
| | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=1 | local=${TRUE}
diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-iacldstbase-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-iacldstbase-ndrpdr.robot
index 6553888b22..ec6f6d24f6 100644
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-iacldstbase-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-iacldstbase-ndrpdr.robot
@@ -15,7 +15,7 @@
| Resource | resources/libraries/robot/shared/default.robot
| ...
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | IACLDST
+| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | IACLDST | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -47,9 +47,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n-ethip4-ip4src253
@@ -71,11 +72,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv4 forwarding in circular topology
| | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3
| | ... | ${dut1} | ip4 | dst | 255.255.255.0
diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-ipolicemarkbase-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-ipolicemarkbase-ndrpdr.robot
index d7ed461d74..9e40dac35d 100644
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-ipolicemarkbase-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-ipolicemarkbase-ndrpdr.robot
@@ -15,7 +15,7 @@
| Resource | resources/libraries/robot/shared/default.robot
| ...
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | IP4FWD | FEATURE | POLICE_MARK
+| ... | NIC_Intel-X710 | IP4FWD | FEATURE | POLICE_MARK | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -46,9 +46,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${cir}= | ${100}
| ${eir}= | ${150}
@@ -75,11 +76,12 @@
| | Set Test Variable | \${cb} | ${frame_size}
| | Set Test Variable | \${eb} | ${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv4 forwarding in circular topology
| | And Initialize IPv4 policer 2r3c-'ca' in circular topology
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-ndrpdr.robot
index 0b44a6249e..6e27f03738 100644
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-ndrpdr.robot
@@ -15,7 +15,7 @@
| Resource | resources/libraries/robot/shared/default.robot
| ...
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | IP4FWD | BASE | IP4BASE
+| ... | NIC_Intel-X710 | ETH | IP4FWD | BASE | IP4BASE | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -46,9 +46,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n-ethip4-ip4src253
@@ -70,11 +71,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv4 forwarding in circular topology
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale200k-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale200k-ndrpdr.robot
index 2b78f27af0..eb2303fe22 100644
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale200k-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale200k-ndrpdr.robot
@@ -15,7 +15,7 @@
| Resource | resources/libraries/robot/shared/default.robot
| ...
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | IP4FWD | SCALE | FIB_200k
+| ... | NIC_Intel-X710 | ETH | IP4FWD | SCALE | FIB_200k | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -45,9 +45,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${rts_per_flow}= | ${100000}
# Traffic profile:
@@ -71,11 +72,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv4 forwarding with scaling in circular topology
| | ... | ${rts_per_flow}
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale20k-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale20k-ndrpdr.robot
index 28eafa7a09..791c0e0993 100644
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale20k-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale20k-ndrpdr.robot
@@ -15,7 +15,7 @@
| Resource | resources/libraries/robot/shared/default.robot
| ...
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | IP4FWD | SCALE | FIB_20k
+| ... | NIC_Intel-X710 | ETH | IP4FWD | SCALE | FIB_20k | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -45,9 +45,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${rts_per_flow}= | ${10000}
# Traffic profile:
@@ -71,11 +72,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv4 forwarding with scaling in circular topology
| | ... | ${rts_per_flow}
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale2m-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale2m-ndrpdr.robot
index 8a25d47202..e0ade7e83a 100644
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale2m-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale2m-ndrpdr.robot
@@ -15,7 +15,7 @@
| Resource | resources/libraries/robot/shared/default.robot
| ...
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | IP4FWD | SCALE | FIB_2M
+| ... | NIC_Intel-X710 | ETH | IP4FWD | SCALE | FIB_2M | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -45,9 +45,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${rts_per_flow}= | ${1000000}
# Traffic profile:
@@ -71,11 +72,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv4 forwarding with scaling in circular topology
| | ... | ${rts_per_flow}
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl1sf-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl1sf-10kflows-ndrpdr.robot
index a6fb17a459..379dedc38a 100644
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl1sf-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl1sf-10kflows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATEFUL
-| ... | IACL | ACL1 | 10K_FLOWS
+| ... | IACL | ACL1 | 10K_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -47,9 +47,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit+reflect
@@ -87,11 +88,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
| | ... | ${ip_nr}
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl1sl-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl1sl-10kflows-ndrpdr.robot
index 07f89c7b05..2044275651 100644
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl1sl-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl1sl-10kflows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATELESS
-| ... | IACL | ACL1 | 10K_FLOWS
+| ... | IACL | ACL1 | 10K_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -47,9 +47,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit
@@ -87,11 +88,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
| | ... | ${ip_nr}
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdr.robot
index 203193e32e..baddcd098c 100644
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATEFUL
-| ... | IACL | ACL50 | 10K_FLOWS
+| ... | IACL | ACL50 | 10K_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -47,9 +47,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit+reflect
@@ -87,11 +88,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
| | ... | ${ip_nr}
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdr.robot
index 5a224d7351..1405611e6e 100644
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATELESS
-| ... | IACL | ACL50 | 10K_FLOWS
+| ... | IACL | ACL50 | 10K_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -47,9 +47,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit
@@ -87,11 +88,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
| | ... | ${ip_nr}
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-nat44-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-nat44-ndrpdr.robot
index 90262b5e1e..3ad106cfaf 100644
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-nat44-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-nat44-ndrpdr.robot
@@ -17,7 +17,7 @@
| Resource | resources/libraries/robot/shared/traffic.robot
| ...
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | NAT44 | BASE
+| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | NAT44 | BASE | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -48,9 +48,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | nat_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n-ethip4udp-1u1p
@@ -73,12 +74,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Add NAT to all DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize NAT44 in circular topology
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-oacl50sf-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-oacl50sf-10kflows-ndrpdr.robot
index 702227be3e..9f600e3d55 100644
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-oacl50sf-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-oacl50sf-10kflows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATEFUL
-| ... | OACL | ACL50 | 10K_FLOWS
+| ... | OACL | ACL50 | 10K_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -47,9 +47,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit+reflect
@@ -87,11 +88,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
| | ... | ${ip_nr}
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-oacl50sl-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-oacl50sl-10kflows-ndrpdr.robot
index dd03c224b5..95537602a3 100644
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-oacl50sl-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-oacl50sl-10kflows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATELESS
-| ... | OACL | ACL50 | 10K_FLOWS
+| ... | OACL | ACL50 | 10K_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -47,9 +47,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit
@@ -87,11 +88,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
| | ... | ${ip_nr}
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale100l2bd100vlan100vxlan-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale100l2bd100vlan100vxlan-ndrpdr.robot
index 4ec4b440af..65da751111 100644
--- a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale100l2bd100vlan100vxlan-ndrpdr.robot
+++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale100l2bd100vlan100vxlan-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | L2BDMACLRN | SCALE | L2BD_100 | DOT1Q | VLAN_100
-| ... | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY | VXLAN_100
+| ... | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY | VXLAN_100 | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -49,9 +49,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${50}
# Traffic profile:
| ${traffic_profile}= | trex-sl-3n-dot1qip4-vlan100ip4src254ip4dst254
@@ -76,11 +77,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize L2 bridge domain with VLAN and VXLANoIPv4 in 3-node circular topology
| | ... | vxlan_count=${vxlan_count}
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale10l2bd10vlan10vxlan-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale10l2bd10vlan10vxlan-ndrpdr.robot
index 38d7a0cb8d..7aa4fffa62 100644
--- a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale10l2bd10vlan10vxlan-ndrpdr.robot
+++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale10l2bd10vlan10vxlan-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | L2BDMACLRN | SCALE | L2BD_10 | DOT1Q | VLAN_10
-| ... | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY | VXLAN_10
+| ... | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY | VXLAN_10 | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -49,9 +49,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${50}
# Traffic profile:
| ${traffic_profile}= | trex-sl-3n-dot1qip4-vlan10ip4src254ip4dst254
@@ -76,11 +77,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize L2 bridge domain with VLAN and VXLANoIPv4 in 3-node circular topology
| | ... | vxlan_count=${vxlan_count}
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale1kl2bd1kvlan1kvxlan-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale1kl2bd1kvlan1kvxlan-ndrpdr.robot
index 25822c3663..8fcca4adb3 100644
--- a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale1kl2bd1kvlan1kvxlan-ndrpdr.robot
+++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale1kl2bd1kvlan1kvxlan-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | L2BDMACLRN | SCALE | L2BD_1K | DOT1Q | VLAN_1K
-| ... | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY | VXLAN_1K
+| ... | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY | VXLAN_1K | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -49,9 +49,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${50}
# Traffic profile:
| ${traffic_profile}= | trex-sl-3n-dot1qip4-vlan1kip4src254ip4dst254
@@ -60,7 +61,6 @@
*** Keywords ***
| Local Template
-| | ...
| | [Documentation]
| | ... | [Cfg] Each DUT runs L2BD forwarding config with VLAN and VXLAN and\
| | ... | uses ${phy_cores} physical core(s) for worker threads.
@@ -76,11 +76,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize L2 bridge domain with VLAN and VXLANoIPv4 in 3-node circular topology
| | ... | vxlan_count=${vxlan_count}
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale1l2bd1vlan1vxlan-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale1l2bd1vlan1vxlan-ndrpdr.robot
index 65c62dc238..5a5d8b8aef 100644
--- a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale1l2bd1vlan1vxlan-ndrpdr.robot
+++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale1l2bd1vlan1vxlan-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | L2BDMACLRN | SCALE | L2BD_1 | DOT1Q | VLAN_1
-| ... | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY | VXLAN_1
+| ... | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY | VXLAN_1 | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -49,9 +49,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${50}
# Traffic profile:
| ${traffic_profile}= | trex-sl-3n-dot1qip4-vlan1ip4src254ip4dst254
@@ -60,7 +61,6 @@
*** Keywords ***
| Local Template
-| | ...
| | [Documentation]
| | ... | [Cfg] Each DUT runs L2BD forwarding config with VLAN and VXLAN and\
| | ... | uses ${phy_cores} physical core(s) for worker threads.
@@ -76,11 +76,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize L2 bridge domain with VLAN and VXLANoIPv4 in 3-node circular topology
| | ... | vxlan_count=${vxlan_count}
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4lispip4-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4lispip4-ip4base-ndrpdr.robot
index 5b730d3943..4cc274513c 100644
--- a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4lispip4-ip4base-ndrpdr.robot
+++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4lispip4-ip4base-ndrpdr.robot
@@ -18,6 +18,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | IP4FWD | ENCAP | LISP | IP4UNRLAY | IP4OVRLAY
+| ... | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -49,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${8}
# Traffic profile:
| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src253
@@ -74,11 +76,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize LISP IPv4 forwarding in 3-node circular topology
| | ... | ${dut1_to_dut2_ip4} | ${dut1_to_tg_ip4} | ${dut2_to_dut1_ip4}
| | ... | ${dut2_to_tg_ip4} | ${prefix4}
diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4lispip6-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4lispip6-ip4base-ndrpdr.robot
index 725ea9df71..b93774ab04 100644
--- a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4lispip6-ip4base-ndrpdr.robot
+++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4lispip6-ip4base-ndrpdr.robot
@@ -18,6 +18,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | IP4FWD | ENCAP | LISP | IP6UNRLAY | IP4OVRLAY
+| ... | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -49,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${48}
# Traffic profile:
| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src253
@@ -74,11 +76,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology
| | ... | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6}
| | ... | ${dut2_to_tg_ip4o6} | ${tg_prefix4o6} | ${dut_prefix4o6}
diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-ndrpdr.robot
index 0e27771ded..59956e4893 100644
--- a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-ndrpdr.robot
+++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-ndrpdr.robot
@@ -16,6 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | L2BDMACLRN | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY
+| ... | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -47,9 +48,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${50}
# Traffic profile:
| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254
@@ -71,11 +73,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize L2 bridge domain with VXLANoIPv4 in 3-node circular topology
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4vxlan-l2xcbase-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4vxlan-l2xcbase-ndrpdr.robot
index 3510e99127..cd9ff7ef51 100644
--- a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4vxlan-l2xcbase-ndrpdr.robot
+++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4vxlan-l2xcbase-ndrpdr.robot
@@ -16,6 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | L2XCFWD | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY
+| ... | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -47,9 +48,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${50}
# Traffic profile:
| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254
@@ -71,11 +73,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize L2 xconnect with VXLANoIPv4 in 3-node circular topology
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip6/10ge2p1x710-avf-dot1q-ip6base-ndrpdr.robot b/tests/vpp/perf/ip6/10ge2p1x710-avf-dot1q-ip6base-ndrpdr.robot
index 7dd7d28014..be0e3a4db6 100644
--- a/tests/vpp/perf/ip6/10ge2p1x710-avf-dot1q-ip6base-ndrpdr.robot
+++ b/tests/vpp/perf/ip6/10ge2p1x710-avf-dot1q-ip6base-ndrpdr.robot
@@ -18,7 +18,7 @@
| ... | NIC_Intel-X710 | ETH | IP6FWD | BASE | DOT1Q | IP6BASE | DRV_AVF
| ...
| Suite Setup | Setup suite single link | performance_avf
-| Suite Teardown | Tear down suite | performance | vifs
+| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test
| Test Teardown | Tear down test | performance
| ...
@@ -48,10 +48,11 @@
| ... | *[Ref] Applicable standard specifications:* RFC2544.
*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so | avf_plugin.so
-| ${osi_layer}= | L3
+| @{plugins_to_enable}= | avf_plugin.so
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | avf
+| ${osi_layer}= | L3
| ${overhead}= | ${4}
| ${subid}= | 10
| ${tag_rewrite}= | pop-1
@@ -78,11 +79,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add DPDK no PCI to all DUTs
-| | And Set Max Rate And Jumbo
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv6 forwarding with VLAN dot1q sub-interfaces in circular topology
| | ... | ${tg_if1_net} | ${tg_if2_net} | ${subid} | ${tag_rewrite}
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip6/10ge2p1x710-avf-ethip6-ip6base-ndrpdr.robot b/tests/vpp/perf/ip6/10ge2p1x710-avf-ethip6-ip6base-ndrpdr.robot
index 76222b6265..558314f253 100644
--- a/tests/vpp/perf/ip6/10ge2p1x710-avf-ethip6-ip6base-ndrpdr.robot
+++ b/tests/vpp/perf/ip6/10ge2p1x710-avf-ethip6-ip6base-ndrpdr.robot
@@ -18,7 +18,7 @@
| ... | NIC_Intel-X710 | ETH | IP6FWD | BASE | IP6BASE | DRV_AVF
| ...
| Suite Setup | Setup suite single link | performance_avf
-| Suite Teardown | Tear down suite | performance | vifs
+| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test
| Test Teardown | Tear down test | performance
| ...
@@ -45,10 +45,11 @@
| ... | *[Ref] Applicable standard specifications:* RFC2544.
*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so | avf_plugin.so
-| ${osi_layer}= | L3
+| @{plugins_to_enable}= | dpdk_plugin.so
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | avf
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
# Traffic profile:
| ${traffic_profile}= | trex-sl-3n-ethip6-ip6src253
@@ -70,11 +71,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add DPDK no PCI to all DUTs
-| | And Set Max Rate And Jumbo
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv6 forwarding in circular topology
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip6/10ge2p1x710-avf-ethip6-ip6scale200k-ndrpdr.robot b/tests/vpp/perf/ip6/10ge2p1x710-avf-ethip6-ip6scale200k-ndrpdr.robot
index e1ca2c7efa..ad4239144e 100644
--- a/tests/vpp/perf/ip6/10ge2p1x710-avf-ethip6-ip6scale200k-ndrpdr.robot
+++ b/tests/vpp/perf/ip6/10ge2p1x710-avf-ethip6-ip6scale200k-ndrpdr.robot
@@ -18,7 +18,7 @@
| ... | NIC_Intel-X710 | ETH | IP6FWD | SCALE | FIB_200K | DRV_AVF
| ...
| Suite Setup | Setup suite single link | performance_avf
-| Suite Teardown | Tear down suite | performance | vifs
+| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test
| Test Teardown | Tear down test | performance
| ...
@@ -46,10 +46,11 @@
| ... | *[Ref] Applicable standard specifications:* RFC2544.
*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so | avf_plugin.so
-| ${osi_layer}= | L3
+| @{plugins_to_enable}= | avf_plugin.so
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | avf
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${rts_per_flow}= | ${100000}
# Traffic profile:
@@ -72,11 +73,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add DPDK no PCI to all DUTs
-| | And Set Max Rate And Jumbo
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv6 forwarding with scaling in circular topology
| | ... | ${rts_per_flow}
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip6/10ge2p1x710-avf-ethip6-ip6scale20k-ndrpdr.robot b/tests/vpp/perf/ip6/10ge2p1x710-avf-ethip6-ip6scale20k-ndrpdr.robot
index ae1a0f2343..d237362ea7 100644
--- a/tests/vpp/perf/ip6/10ge2p1x710-avf-ethip6-ip6scale20k-ndrpdr.robot
+++ b/tests/vpp/perf/ip6/10ge2p1x710-avf-ethip6-ip6scale20k-ndrpdr.robot
@@ -18,7 +18,7 @@
| ... | NIC_Intel-X710 | ETH | IP6FWD | SCALE | FIB_20K | DRV_AVF
| ...
| Suite Setup | Setup suite single link | performance_avf
-| Suite Teardown | Tear down suite | performance | vifs
+| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test
| Test Teardown | Tear down test | performance
| ...
@@ -46,10 +46,11 @@
| ... | *[Ref] Applicable standard specifications:* RFC2544.
*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so | avf_plugin.so
-| ${osi_layer}= | L3
+| @{plugins_to_enable}= | avf_plugin.so
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | avf
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${rts_per_flow}= | ${10000}
# Traffic profile:
@@ -72,11 +73,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add DPDK no PCI to all DUTs
-| | And Set Max Rate And Jumbo
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv6 forwarding with scaling in circular topology
| | ... | ${rts_per_flow}
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip6/10ge2p1x710-avf-ethip6-ip6scale2m-ndrpdr.robot b/tests/vpp/perf/ip6/10ge2p1x710-avf-ethip6-ip6scale2m-ndrpdr.robot
index 194870335f..f815e43558 100644
--- a/tests/vpp/perf/ip6/10ge2p1x710-avf-ethip6-ip6scale2m-ndrpdr.robot
+++ b/tests/vpp/perf/ip6/10ge2p1x710-avf-ethip6-ip6scale2m-ndrpdr.robot
@@ -18,7 +18,7 @@
| ... | NIC_Intel-X710 | ETH | IP6FWD | SCALE | FIB_2M | DRV_AVF
| ...
| Suite Setup | Setup suite single link | performance_avf
-| Suite Teardown | Tear down suite | performance | vifs
+| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test
| Test Teardown | Tear down test | performance
| ...
@@ -46,10 +46,11 @@
| ... | *[Ref] Applicable standard specifications:* RFC2544.
*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so | avf_plugin.so
-| ${osi_layer}= | L3
+| @{plugins_to_enable}= | avf_plugin.so
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | avf
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${rts_per_flow}= | ${1000000}
# Traffic profile:
@@ -72,11 +73,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add DPDK no PCI to all DUTs
-| | And Set Max Rate And Jumbo
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv6 forwarding with scaling in circular topology
| | ... | ${rts_per_flow}
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip6/10ge2p1x710-dot1q-ip6base-ndrpdr.robot b/tests/vpp/perf/ip6/10ge2p1x710-dot1q-ip6base-ndrpdr.robot
index 5051df558d..7e7bd45d22 100644
--- a/tests/vpp/perf/ip6/10ge2p1x710-dot1q-ip6base-ndrpdr.robot
+++ b/tests/vpp/perf/ip6/10ge2p1x710-dot1q-ip6base-ndrpdr.robot
@@ -15,7 +15,7 @@
| Resource | resources/libraries/robot/shared/default.robot
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | IP6FWD | BASE | DOT1Q | IP6BASE
+| ... | NIC_Intel-X710 | ETH | IP6FWD | BASE | DOT1Q | IP6BASE | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -49,9 +49,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${4}
| ${subid}= | 10
| ${tag_rewrite}= | pop-1
@@ -78,11 +79,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv6 forwarding with VLAN dot1q sub-interfaces in circular topology
| | ... | ${tg_if1_net} | ${tg_if2_net} | ${subid} | ${tag_rewrite}
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-copwhtlistbase-ndrpdr.robot b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-copwhtlistbase-ndrpdr.robot
index 9c5992b60a..3b18d1b53b 100644
--- a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-copwhtlistbase-ndrpdr.robot
+++ b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-copwhtlistbase-ndrpdr.robot
@@ -16,7 +16,7 @@
| Library | resources.libraries.python.Cop
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | IP6FWD | FEATURE | COPWHLIST
+| ... | NIC_Intel-X710 | ETH | IP6FWD | FEATURE | COPWHLIST | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -49,9 +49,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
# Traffic profile:
| ${traffic_profile}= | trex-sl-3n-ethip6-ip6src253
@@ -73,11 +74,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv6 forwarding in circular topology
| | And Add Fib Table | ${dut1} | 1 | ipv6=${TRUE}
| | And Vpp Route Add | ${dut1} | 2001:1:: | 64 | vrf=1 | local=${TRUE}
diff --git a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-iacldstbase-ndrpdr.robot b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-iacldstbase-ndrpdr.robot
index 40f41505de..ab0963b34a 100644
--- a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-iacldstbase-ndrpdr.robot
+++ b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-iacldstbase-ndrpdr.robot
@@ -15,7 +15,7 @@
| Resource | resources/libraries/robot/shared/default.robot
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | IP6FWD | FEATURE | IACLDST
+| ... | NIC_Intel-X710 | ETH | IP6FWD | FEATURE | IACLDST | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -47,9 +47,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
# Traffic profile:
| ${traffic_profile}= | trex-sl-3n-ethip6-ip6src253
@@ -71,11 +72,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv6 forwarding in circular topology
| | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3
| | ... | ${dut1} | ip6 | dst | ffff:ffff:ffff:ffff:ffff:ffff:ffff:0
diff --git a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-ndrpdr.robot b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-ndrpdr.robot
index 6af0d03179..5e0a0315b8 100644
--- a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-ndrpdr.robot
+++ b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-ndrpdr.robot
@@ -15,7 +15,7 @@
| Resource | resources/libraries/robot/shared/default.robot
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | IP6FWD | BASE | IP6BASE
+| ... | NIC_Intel-X710 | ETH | IP6FWD | BASE | IP6BASE | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -46,9 +46,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
# Traffic profile:
| ${traffic_profile}= | trex-sl-3n-ethip6-ip6src253
@@ -70,11 +71,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv6 forwarding in circular topology
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale200k-ndrpdr.robot b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale200k-ndrpdr.robot
index d1d9fa14d9..f5ee66f7eb 100644
--- a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale200k-ndrpdr.robot
+++ b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale200k-ndrpdr.robot
@@ -15,7 +15,7 @@
| Resource | resources/libraries/robot/shared/default.robot
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | IP6FWD | SCALE | FIB_200K
+| ... | NIC_Intel-X710 | ETH | IP6FWD | SCALE | FIB_200K | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -47,9 +47,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${rts_per_flow}= | ${100000}
# Traffic profile:
@@ -72,11 +73,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv6 forwarding with scaling in circular topology
| | ... | ${rts_per_flow}
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale20k-ndrpdr.robot b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale20k-ndrpdr.robot
index 4fd6303dac..1e62c9a169 100644
--- a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale20k-ndrpdr.robot
+++ b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale20k-ndrpdr.robot
@@ -15,7 +15,7 @@
| Resource | resources/libraries/robot/shared/default.robot
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | IP6FWD | SCALE | FIB_20K
+| ... | NIC_Intel-X710 | ETH | IP6FWD | SCALE | FIB_20K | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -47,9 +47,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${rts_per_flow}= | ${10000}
# Traffic profile:
@@ -72,11 +73,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv6 forwarding with scaling in circular topology
| | ... | ${rts_per_flow}
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale2m-ndrpdr.robot b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale2m-ndrpdr.robot
index 399f0c9f03..d5a1235fa7 100644
--- a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale2m-ndrpdr.robot
+++ b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale2m-ndrpdr.robot
@@ -15,7 +15,7 @@
| Resource | resources/libraries/robot/shared/default.robot
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | IP6FWD | SCALE | FIB_2M
+| ... | NIC_Intel-X710 | ETH | IP6FWD | SCALE | FIB_2M | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -47,9 +47,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${rts_per_flow}= | ${1000000}
# Traffic profile:
@@ -72,11 +73,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv6 forwarding with scaling in circular topology
| | ... | ${rts_per_flow}
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-avf-dot1q-ip6base-ndrpdr.robot b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-avf-dot1q-ip6base-ndrpdr.robot
index da2a09a5bf..b2b29b5dcd 100644
--- a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-avf-dot1q-ip6base-ndrpdr.robot
+++ b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-avf-dot1q-ip6base-ndrpdr.robot
@@ -18,7 +18,7 @@
| ... | NIC_Intel-X710 | ETH | IP6FWD | BASE | DOT1Q | IP6BASE | DRV_AVF
| ...
| Suite Setup | Setup suite single link | performance_avf
-| Suite Teardown | Tear down suite | performance | vifs
+| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test
| Test Teardown | Tear down test | performance
| ...
@@ -48,10 +48,11 @@
| ... | *[Ref] Applicable standard specifications:* RFC2544.
*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so | avf_plugin.so
-| ${osi_layer}= | L3
+| @{plugins_to_enable}= | avf_plugin.so
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | avf
+| ${osi_layer}= | L3
| ${overhead}= | ${4}
| ${subid}= | 10
| ${tag_rewrite}= | pop-1
@@ -78,11 +79,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add DPDK no PCI to all DUTs
-| | And Set Max Rate And Jumbo
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv6 forwarding with VLAN dot1q sub-interfaces in circular topology
| | ... | ${tg_if1_net} | ${tg_if2_net} | ${subid} | ${tag_rewrite}
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-avf-ethip6-ip6base-ndrpdr.robot b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-avf-ethip6-ip6base-ndrpdr.robot
index a12066d1e0..acaba9913a 100644
--- a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-avf-ethip6-ip6base-ndrpdr.robot
+++ b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-avf-ethip6-ip6base-ndrpdr.robot
@@ -18,7 +18,7 @@
| ... | NIC_Intel-X710 | ETH | IP6FWD | BASE | IP6BASE | DRV_AVF
| ...
| Suite Setup | Setup suite single link | performance_avf
-| Suite Teardown | Tear down suite | performance | vifs
+| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test
| Test Teardown | Tear down test | performance
| ...
@@ -45,10 +45,11 @@
| ... | *[Ref] Applicable standard specifications:* RFC2544.
*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so | avf_plugin.so
-| ${osi_layer}= | L3
+| @{plugins_to_enable}= | avf_plugin.so
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | avf
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n-ethip6-ip6src253
@@ -70,11 +71,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add DPDK no PCI to all DUTs
-| | And Set Max Rate And Jumbo
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv6 forwarding in circular topology
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-avf-ethip6-ip6scale200k-ndrpdr.robot b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-avf-ethip6-ip6scale200k-ndrpdr.robot
index 8739e3450d..10d5defe7a 100644
--- a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-avf-ethip6-ip6scale200k-ndrpdr.robot
+++ b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-avf-ethip6-ip6scale200k-ndrpdr.robot
@@ -18,7 +18,7 @@
| ... | NIC_Intel-X710 | ETH | IP6FWD | SCALE | FIB_200K | DRV_AVF
| ...
| Suite Setup | Setup suite single link | performance_avf
-| Suite Teardown | Tear down suite | performance | vifs
+| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test
| Test Teardown | Tear down test | performance
| ...
@@ -46,10 +46,11 @@
| ... | *[Ref] Applicable standard specifications:* RFC2544.
*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so | avf_plugin.so
-| ${osi_layer}= | L3
+| @{plugins_to_enable}= | avf_plugin.so
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | avf
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${rts_per_flow}= | ${100000}
# Traffic profile:
@@ -72,11 +73,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add DPDK no PCI to all DUTs
-| | And Set Max Rate And Jumbo
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv6 forwarding with scaling in circular topology
| | ... | ${rts_per_flow}
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-avf-ethip6-ip6scale20k-ndrpdr.robot b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-avf-ethip6-ip6scale20k-ndrpdr.robot
index d6ea0e7786..664b4b1df4 100644
--- a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-avf-ethip6-ip6scale20k-ndrpdr.robot
+++ b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-avf-ethip6-ip6scale20k-ndrpdr.robot
@@ -18,7 +18,7 @@
| ... | NIC_Intel-X710 | ETH | IP6FWD | SCALE | FIB_20K | DRV_AVF
| ...
| Suite Setup | Setup suite single link | performance_avf
-| Suite Teardown | Tear down suite | performance | vifs
+| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test
| Test Teardown | Tear down test | performance
| ...
@@ -46,10 +46,11 @@
| ... | *[Ref] Applicable standard specifications:* RFC2544.
*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so | avf_plugin.so
-| ${osi_layer}= | L3
+| @{plugins_to_enable}= | avf_plugin.so
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | avf
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${rts_per_flow}= | ${10000}
# Traffic profile:
@@ -72,11 +73,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add DPDK no PCI to all DUTs
-| | And Set Max Rate And Jumbo
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv6 forwarding with scaling in circular topology
| | ... | ${rts_per_flow}
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-avf-ethip6-ip6scale2m-ndrpdr.robot b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-avf-ethip6-ip6scale2m-ndrpdr.robot
index 5e63ee310f..b67ac97f27 100644
--- a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-avf-ethip6-ip6scale2m-ndrpdr.robot
+++ b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-avf-ethip6-ip6scale2m-ndrpdr.robot
@@ -18,7 +18,7 @@
| ... | NIC_Intel-X710 | ETH | IP6FWD | SCALE | FIB_2M | DRV_AVF
| ...
| Suite Setup | Setup suite single link | performance_avf
-| Suite Teardown | Tear down suite | performance | vifs
+| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test
| Test Teardown | Tear down test | performance
| ...
@@ -46,10 +46,11 @@
| ... | *[Ref] Applicable standard specifications:* RFC2544.
*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so | avf_plugin.so
-| ${osi_layer}= | L3
+| @{plugins_to_enable}= | avf_plugin.so
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | avf
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${rts_per_flow}= | ${1000000}
# Traffic profile:
@@ -72,11 +73,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add DPDK no PCI to all DUTs
-| | And Set Max Rate And Jumbo
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv6 forwarding with scaling in circular topology
| | ... | ${rts_per_flow}
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-dot1q-ip6base-ndrpdr.robot b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-dot1q-ip6base-ndrpdr.robot
index 37c67f15c6..73f046752d 100644
--- a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-dot1q-ip6base-ndrpdr.robot
+++ b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-dot1q-ip6base-ndrpdr.robot
@@ -15,7 +15,7 @@
| Resource | resources/libraries/robot/shared/default.robot
| ...
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | IP6FWD | BASE | DOT1Q | IP6BASE
+| ... | NIC_Intel-X710 | ETH | IP6FWD | BASE | DOT1Q | IP6BASE | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -48,9 +48,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${4}
| ${subid}= | 10
| ${tag_rewrite}= | pop-1
@@ -77,11 +78,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | When Initialize layer driver | ${nic_driver}
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | When Initialize IPv6 forwarding with VLAN dot1q sub-interfaces in circular topology
| | ... | ${tg_if1_net} | ${tg_if2_net} | ${subid} | ${tag_rewrite}
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6base-copwhtlistbase-ndrpdr.robot b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6base-copwhtlistbase-ndrpdr.robot
index e3190e6785..7cd93149df 100644
--- a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6base-copwhtlistbase-ndrpdr.robot
+++ b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6base-copwhtlistbase-ndrpdr.robot
@@ -16,7 +16,7 @@
| Library | resources.libraries.python.Cop
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | IP6FWD | FEATURE | COPWHLIST
+| ... | NIC_Intel-X710 | ETH | IP6FWD | FEATURE | COPWHLIST | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -49,9 +49,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n-ethip6-ip6src253
@@ -73,11 +74,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv6 forwarding in circular topology
| | And Add Fib Table | ${dut1} | 1 | ipv6=${TRUE}
| | And Vpp Route Add | ${dut1} | 2001:1:: | 64 | vrf=1 | local=${TRUE}
diff --git a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6base-iacldstbase-ndrpdr.robot b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6base-iacldstbase-ndrpdr.robot
index 26e21c598d..3bed647eb0 100644
--- a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6base-iacldstbase-ndrpdr.robot
+++ b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6base-iacldstbase-ndrpdr.robot
@@ -15,7 +15,7 @@
| Resource | resources/libraries/robot/shared/default.robot
| ...
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | IP6FWD | FEATURE | IACLDST
+| ... | NIC_Intel-X710 | ETH | IP6FWD | FEATURE | IACLDST | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -47,9 +47,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n-ethip6-ip6src253
@@ -71,11 +72,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv6 forwarding in circular topology
| | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3
| | ... | ${dut1} | ip6 | dst | ffff:ffff:ffff:ffff:ffff:ffff:ffff:0
diff --git a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6base-ndrpdr.robot b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6base-ndrpdr.robot
index 65ac618511..7b779e13b6 100644
--- a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6base-ndrpdr.robot
+++ b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6base-ndrpdr.robot
@@ -15,7 +15,7 @@
| Resource | resources/libraries/robot/shared/default.robot
| ...
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | IP6FWD | BASE | IP6BASE
+| ... | NIC_Intel-X710 | ETH | IP6FWD | BASE | IP6BASE | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -45,9 +45,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n-ethip6-ip6src253
@@ -69,11 +70,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv6 forwarding in circular topology
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale200k-ndrpdr.robot b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale200k-ndrpdr.robot
index ea574cb8ae..728b39c8ad 100644
--- a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale200k-ndrpdr.robot
+++ b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale200k-ndrpdr.robot
@@ -15,7 +15,7 @@
| Resource | resources/libraries/robot/shared/default.robot
| ...
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | IP6FWD | SCALE | FIB_200K
+| ... | NIC_Intel-X710 | ETH | IP6FWD | SCALE | FIB_200K | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -46,9 +46,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${rts_per_flow}= | ${100000}
# Traffic profile:
@@ -71,11 +72,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv6 forwarding with scaling in circular topology
| | ... | ${rts_per_flow}
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale20k-ndrpdr.robot b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale20k-ndrpdr.robot
index be1d861594..72aad63da9 100644
--- a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale20k-ndrpdr.robot
+++ b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale20k-ndrpdr.robot
@@ -15,7 +15,7 @@
| Resource | resources/libraries/robot/shared/default.robot
| ...
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | IP6FWD | SCALE | FIB_20K
+| ... | NIC_Intel-X710 | ETH | IP6FWD | SCALE | FIB_20K | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -46,9 +46,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${rts_per_flow}= | ${10000}
# Traffic profile:
@@ -71,11 +72,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv6 forwarding with scaling in circular topology
| | ... | ${rts_per_flow}
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale2m-ndrpdr.robot b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale2m-ndrpdr.robot
index c7f288110c..11965d990d 100644
--- a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale2m-ndrpdr.robot
+++ b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale2m-ndrpdr.robot
@@ -15,7 +15,7 @@
| Resource | resources/libraries/robot/shared/default.robot
| ...
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | IP6FWD | SCALE | FIB_2M
+| ... | NIC_Intel-X710 | ETH | IP6FWD | SCALE | FIB_2M | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -46,9 +46,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${rts_per_flow}= | ${1000000}
# Traffic profile:
@@ -71,11 +72,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv6 forwarding with scaling in circular topology
| | ... | ${rts_per_flow}
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/ip6_tunnels/10ge2p1x710-ethip6lispip4-ip6base-ndrpdr.robot b/tests/vpp/perf/ip6_tunnels/10ge2p1x710-ethip6lispip4-ip6base-ndrpdr.robot
index c1bc2655e5..576fa0ee3d 100644
--- a/tests/vpp/perf/ip6_tunnels/10ge2p1x710-ethip6lispip4-ip6base-ndrpdr.robot
+++ b/tests/vpp/perf/ip6_tunnels/10ge2p1x710-ethip6lispip4-ip6base-ndrpdr.robot
@@ -18,6 +18,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | IP6FWD | ENCAP | LISP | IP4UNRLAY | IP6OVRLAY
+| ... | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -44,10 +45,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
-# LISP overhead
+| ${osi_layer}= | L3
| ${overhead}= | 48
# Traffic profile:
| ${traffic_profile}= | trex-sl-3n-ethip6-ip6src253
@@ -70,11 +71,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize LISP IPv6 over IPv4 forwarding in 3-node circular topology
| | ... | ${dut1_to_dut2_ip6o4} | ${dut1_to_tg_ip6o4} | ${dut2_to_dut1_ip6o4}
| | ... | ${dut2_to_tg_ip6o4} | ${tg_prefix6o4} | ${dut_prefix6o4}
diff --git a/tests/vpp/perf/ip6_tunnels/10ge2p1x710-ethip6lispip6-ip6base-ndrpdr.robot b/tests/vpp/perf/ip6_tunnels/10ge2p1x710-ethip6lispip6-ip6base-ndrpdr.robot
index 482e1caceb..fe409f666f 100644
--- a/tests/vpp/perf/ip6_tunnels/10ge2p1x710-ethip6lispip6-ip6base-ndrpdr.robot
+++ b/tests/vpp/perf/ip6_tunnels/10ge2p1x710-ethip6lispip6-ip6base-ndrpdr.robot
@@ -18,6 +18,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | IP6FWD | ENCAP | LISP | IP6UNRLAY | IP6OVRLAY
+| ... | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -44,10 +45,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
-# LISP overhead
+| ${osi_layer}= | L3
| ${overhead}= | 8
# Traffic profile:
| ${traffic_profile}= | trex-sl-3n-ethip6-ip6src253
@@ -70,11 +71,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize LISP IPv6 forwarding in 3-node circular topology
| | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6}
| | ... | ${dut2_to_tg_ip6} | ${prefix6}
diff --git a/tests/vpp/perf/l2/10ge2p1x710-avf-dot1q-l2bdbasemaclrn-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-avf-dot1q-l2bdbasemaclrn-ndrpdr.robot
index 4ce69fea8a..78ec2bf124 100644
--- a/tests/vpp/perf/l2/10ge2p1x710-avf-dot1q-l2bdbasemaclrn-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-avf-dot1q-l2bdbasemaclrn-ndrpdr.robot
@@ -18,7 +18,7 @@
| ... | NIC_Intel-X710 | BASE | DOT1Q | L2BDMACLRN | DRV_AVF
| ...
| Suite Setup | Setup suite single link | performance_avf
-| Suite Teardown | Tear down suite | performance | vifs
+| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test
| Test Teardown | Tear down test | performance
| ...
@@ -47,10 +47,11 @@
| ... | *[Ref] Applicable standard specifications:* RFC2544.
*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so | avf_plugin.so
-| ${osi_layer}= | L2
+| @{plugins_to_enable}= | avf_plugin.so
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | avf
+| ${osi_layer}= | L2
| ${overhead}= | ${4}
| ${subid}= | 10
| ${tag_rewrite}= | pop-1
@@ -77,11 +78,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add DPDK no PCI to all DUTs
-| | And Set Max Rate And Jumbo
-| | And Apply startup configuration on all VPP DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply Startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize L2 bridge domains with VLAN dot1q sub-interfaces in circular topology
| | ... | ${bd_id1} | ${bd_id2} | ${subid} | ${tag_rewrite}
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/l2/10ge2p1x710-avf-eth-l2bdbasemaclrn-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-avf-eth-l2bdbasemaclrn-ndrpdr.robot
index d7c182dafe..f1cf436b8a 100644
--- a/tests/vpp/perf/l2/10ge2p1x710-avf-eth-l2bdbasemaclrn-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-avf-eth-l2bdbasemaclrn-ndrpdr.robot
@@ -18,7 +18,7 @@
| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | DRV_AVF
| ...
| Suite Setup | Setup suite single link | performance_avf
-| Suite Teardown | Tear down suite | performance | vifs
+| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test
| Test Teardown | Tear down test | performance
| ...
@@ -46,10 +46,11 @@
| ... | *[Ref] Applicable standard specifications:* RFC2544.
*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so | avf_plugin.so
-| ${osi_layer}= | L2
+| @{plugins_to_enable}= | avf_plugin.so
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | avf
+| ${osi_layer}= | L2
| ${overhead}= | ${0}
# Traffic profile:
| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254
@@ -70,10 +71,10 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add DPDK no PCI to all DUTs
-| | And Set Max Rate And Jumbo
-| | And Apply startup configuration on all VPP DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply Startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
| | And Initialize L2 bridge domain
diff --git a/tests/vpp/perf/l2/10ge2p1x710-avf-eth-l2patch-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-avf-eth-l2patch-ndrpdr.robot
index 894b3190ff..30a6b5dfeb 100644
--- a/tests/vpp/perf/l2/10ge2p1x710-avf-eth-l2patch-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-avf-eth-l2patch-ndrpdr.robot
@@ -18,7 +18,7 @@
| ... | NIC_Intel-X710 | ETH | L2PATCH | BASE | DRV_AVF
| ...
| Suite Setup | Setup suite single link | performance_avf
-| Suite Teardown | Tear down suite | performance | vifs
+| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test
| Test Teardown | Tear down test | performance
| ...
@@ -45,10 +45,11 @@
| ... | *[Ref] Applicable standard specifications:* RFC2544.
*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so | avf_plugin.so
-| ${osi_layer}= | L2
+| @{plugins_to_enable}= | avf_plugin.so
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | avf
+| ${osi_layer}= | L2
| ${overhead}= | ${0}
# Traffic profile:
| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254
@@ -70,11 +71,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add DPDK no PCI to all DUTs
-| | And Set Max Rate And Jumbo
-| | And Apply startup configuration on all VPP DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply Startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize L2 patch
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/l2/10ge2p1x710-avf-eth-l2xcbase-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-avf-eth-l2xcbase-ndrpdr.robot
index e0cabfa9b8..4302987c8a 100644
--- a/tests/vpp/perf/l2/10ge2p1x710-avf-eth-l2xcbase-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-avf-eth-l2xcbase-ndrpdr.robot
@@ -18,7 +18,7 @@
| ... | NIC_Intel-X710 | ETH | L2XCFWD | BASE | L2XCBASE | DRV_AVF
| ...
| Suite Setup | Setup suite single link | performance_avf
-| Suite Teardown | Tear down suite | performance | vifs
+| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test
| Test Teardown | Tear down test | performance
| ...
@@ -45,10 +45,11 @@
| ... | *[Ref] Applicable standard specifications:* RFC2544.
*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so | avf_plugin.so
-| ${osi_layer}= | L2
+| @{plugins_to_enable}= | avf_plugin.so
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | avf
+| ${osi_layer}= | L2
| ${overhead}= | ${0}
# Traffic profile:
| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254
@@ -70,11 +71,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add DPDK no PCI to all DUTs
-| | And Set Max Rate And Jumbo
-| | And Apply startup configuration on all VPP DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply Startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize L2 Xconnect In 3-node Circular Topology
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/l2/10ge2p1x710-dot1ad-l2xcbase-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-dot1ad-l2xcbase-ndrpdr.robot
index 8e4d777ada..a004ad4f37 100644
--- a/tests/vpp/perf/l2/10ge2p1x710-dot1ad-l2xcbase-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-dot1ad-l2xcbase-ndrpdr.robot
@@ -16,7 +16,7 @@
| Resource | resources/libraries/robot/l2/tagging.robot
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | L2XCFWD | BASE | DOT1AD
+| ... | NIC_Intel-X710 | L2XCFWD | BASE | DOT1AD | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -49,9 +49,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${8}
| ${subid}= | 10
| ${outer_vlan_id}= | 100
@@ -78,12 +79,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply Startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
-| | And Set interfaces in path up
+| | And Initialize layer interface
| | When Initialize VLAN sub-interfaces in 3-node circular topology
| | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid}
| | ... | ${outer_vlan_id} | ${inner_vlan_id} | ${type_subif}
diff --git a/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2bdbasemaclrn-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2bdbasemaclrn-ndrpdr.robot
index 32d95326d4..563dd9d29c 100644
--- a/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2bdbasemaclrn-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2bdbasemaclrn-ndrpdr.robot
@@ -15,7 +15,7 @@
| Resource | resources/libraries/robot/shared/default.robot
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | BASE | DOT1Q | L2BDMACLRN
+| ... | NIC_Intel-X710 | BASE | DOT1Q | L2BDMACLRN | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -48,9 +48,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${4}
| ${subid}= | 10
| ${tag_rewrite}= | pop-1
@@ -77,11 +78,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply Startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize L2 bridge domains with VLAN dot1q sub-interfaces in circular topology
| | ... | ${bd_id1} | ${bd_id2} | ${subid} | ${tag_rewrite}
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2xcbase-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2xcbase-ndrpdr.robot
index 75e1d7b187..3b65ac9388 100644
--- a/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2xcbase-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2xcbase-ndrpdr.robot
@@ -16,7 +16,7 @@
| Resource | resources/libraries/robot/l2/tagging.robot
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | L2XCFWD | BASE | DOT1Q
+| ... | NIC_Intel-X710 | L2XCFWD | BASE | DOT1Q | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -48,9 +48,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${4}
| ${subid}= | 10
| ${tag_rewrite}= | pop-1
@@ -74,11 +75,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply Startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize VLAN dot1q sub-interfaces in circular topology
| | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid}
| | And Configure L2 tag rewrite method on interfaces
diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-100flows-ndrpdr.robot
index b7f3d15585..9f855494c2 100644
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-100flows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-100flows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATEFUL
-| ... | IACL | ACL10 | 100_FLOWS
+| ... | IACL | ACL10 | 100_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -49,9 +49,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit+reflect
@@ -72,7 +73,7 @@
*** Keywords ***
| Local Template
-| | [Documentation] | FIXME.
+| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing config.
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
@@ -87,11 +88,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply Startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-100kflows-ndrpdr.robot
index 9e923609db..b09765e5d6 100644
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-100kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-100kflows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATEFUL
-| ... | IACL | ACL10 | 100K_FLOWS
+| ... | IACL | ACL10 | 100K_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -49,9 +49,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit+reflect
@@ -72,7 +73,7 @@
*** Keywords ***
| Local Template
-| | [Documentation] | FIXME.
+| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing config.
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
@@ -87,11 +88,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply Startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-10kflows-ndrpdr.robot
index cfbfc630af..b92cf9bee3 100644
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-10kflows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATEFUL
-| ... | IACL | ACL10 | 10K_FLOWS
+| ... | IACL | ACL10 | 10K_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -49,9 +49,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit+reflect
@@ -72,7 +73,7 @@
*** Keywords ***
| Local Template
-| | [Documentation] | FIXME.
+| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing config.
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
@@ -87,11 +88,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply Startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-100flows-ndrpdr.robot
index 2b7d9927c2..7fcfbf862b 100644
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-100flows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-100flows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATELESS
-| ... | IACL | ACL10 | 100_FLOWS
+| ... | IACL | ACL10 | 100_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -49,9 +49,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit
@@ -72,7 +73,7 @@
*** Keywords ***
| Local Template
-| | [Documentation] | FIXME.
+| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing config.
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
@@ -87,11 +88,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply Startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-100kflows-ndrpdr.robot
index 81e660a20c..0b0eaa8189 100644
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-100kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-100kflows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATELESS
-| ... | IACL | ACL10 | 100K_FLOWS
+| ... | IACL | ACL10 | 100K_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -49,9 +49,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit
@@ -72,7 +73,7 @@
*** Keywords ***
| Local Template
-| | [Documentation] | FIXME.
+| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing config.
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
@@ -87,11 +88,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply Startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-10kflows-ndrpdr.robot
index c15d58858d..f8f436b4db 100644
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-10kflows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATELESS
-| ... | IACL | ACL10 | 10K_FLOWS
+| ... | IACL | ACL10 | 10K_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -49,9 +49,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit
@@ -72,7 +73,7 @@
*** Keywords ***
| Local Template
-| | [Documentation] | FIXME.
+| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing config.
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
@@ -87,11 +88,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply Startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-100flows-ndrpdr.robot
index 0feec2956b..13c1ad170b 100644
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-100flows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-100flows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATEFUL
-| ... | IACL | ACL1 | 100_FLOWS
+| ... | IACL | ACL1 | 100_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -49,9 +49,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit+reflect
@@ -72,7 +73,7 @@
*** Keywords ***
| Local Template
-| | [Documentation] | FIXME.
+| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing config.
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
@@ -87,11 +88,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply Startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-100kflows-ndrpdr.robot
index 42239964e9..9ddf5bd851 100644
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-100kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-100kflows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATEFUL
-| ... | IACL | ACL1 | 100K_FLOWS
+| ... | IACL | ACL1 | 100K_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -49,9 +49,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit+reflect
@@ -72,7 +73,7 @@
*** Keywords ***
| Local Template
-| | [Documentation] | FIXME.
+| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing config.
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
@@ -87,11 +88,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply Startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-10kflows-ndrpdr.robot
index b0fefd59ad..448bdc4002 100644
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-10kflows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATEFUL
-| ... | IACL | ACL1 | 10K_FLOWS
+| ... | IACL | ACL1 | 10K_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -49,9 +49,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit+reflect
@@ -87,11 +88,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply Startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-100flows-ndrpdr.robot
index a27c3f4b53..3d373ba03a 100644
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-100flows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-100flows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATELESS
-| ... | IACL | ACL1 | 100_FLOWS
+| ... | IACL | ACL1 | 100_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -49,9 +49,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit
@@ -72,7 +73,7 @@
*** Keywords ***
| Local Template
-| | [Documentation] | FIXME.
+| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing config.
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
@@ -87,11 +88,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply Startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-100kflows-ndrpdr.robot
index c9d2662c86..e6d4fe0f64 100644
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-100kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-100kflows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATELESS
-| ... | IACL | ACL1 | 100K_FLOWS
+| ... | IACL | ACL1 | 100K_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -49,9 +49,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit
@@ -72,7 +73,7 @@
*** Keywords ***
| Local Template
-| | [Documentation] | FIXME.
+| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing config.
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
@@ -87,11 +88,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply Startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-10kflows-ndrpdr.robot
index d546e37dbc..b214e56711 100644
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-10kflows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATELESS
-| ... | IACL | ACL1 | 10K_FLOWS
+| ... | IACL | ACL1 | 10K_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -49,9 +49,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit
@@ -87,11 +88,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply Startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-100flows-ndrpdr.robot
index efc638ae06..52b35ac717 100644
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-100flows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-100flows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATEFUL
-| ... | IACL | ACL50 | 100_FLOWS
+| ... | IACL | ACL50 | 100_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -49,9 +49,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit+reflect
@@ -72,7 +73,7 @@
*** Keywords ***
| Local Template
-| | [Documentation] | FIXME.
+| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing config.
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
@@ -87,11 +88,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply Startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-100kflows-ndrpdr.robot
index 7f8050dd8a..8f6bbb6061 100644
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-100kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-100kflows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATEFUL
-| ... | IACL | ACL50 | 100K_FLOWS
+| ... | IACL | ACL50 | 100K_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -49,9 +49,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit+reflect
@@ -72,7 +73,7 @@
*** Keywords ***
| Local Template
-| | [Documentation] | FIXME.
+| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing config.
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
@@ -87,11 +88,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply Startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr.robot
index 21f41a9b62..5bc8ae7608 100644
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATEFUL
-| ... | IACL | ACL50 | 10K_FLOWS
+| ... | IACL | ACL50 | 10K_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -49,9 +49,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit+reflect
@@ -87,11 +88,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply Startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-100flows-ndrpdr.robot
index 11edddabe0..ad7c1f7694 100644
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-100flows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-100flows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATELESS
-| ... | IACL | ACL50 | 100_FLOWS
+| ... | IACL | ACL50 | 100_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -49,9 +49,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit
@@ -72,7 +73,7 @@
*** Keywords ***
| Local Template
-| | [Documentation] | FIXME.
+| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing config.
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
@@ -87,11 +88,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply Startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-100kflows-ndrpdr.robot
index b55092d9bf..3c00890a5a 100644
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-100kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-100kflows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATELESS
-| ... | IACL | ACL50 | 100K_FLOWS
+| ... | IACL | ACL50 | 100K_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -49,9 +49,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit
@@ -72,7 +73,7 @@
*** Keywords ***
| Local Template
-| | [Documentation] | FIXME.
+| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing config.
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
@@ -87,11 +88,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply Startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr.robot
index c8e20baa01..34a6f58ec4 100644
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATELESS
-| ... | IACL | ACL50 | 10K_FLOWS
+| ... | IACL | ACL50 | 10K_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -49,9 +49,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit
@@ -87,11 +88,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply Startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-100flows-ndrpdr.robot
index 7979b90f4b..19524e982b 100644
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-100flows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-100flows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | MACIP | ACL_STATELESS
-| ... | IACL | ACL10 | 100_FLOWS
+| ... | IACL | ACL10 | 100_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit
@@ -74,7 +75,7 @@
*** Keywords ***
| Local Template
-| | [Documentation] | FIXME.
+| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing config.
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
@@ -89,11 +90,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply Startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize L2 bridge domain with MACIP ACLs on DUT1 in 3-node circular topology
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-100kflows-ndrpdr.robot
index e7b561b3a7..e79f835880 100644
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-100kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-100kflows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | MACIP | ACL_STATELESS
-| ... | IACL | ACL10 | 100K_FLOWS
+| ... | IACL | ACL10 | 100K_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit
@@ -74,7 +75,7 @@
*** Keywords ***
| Local Template
-| | [Documentation] | FIXME.
+| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing config.
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
@@ -89,11 +90,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply Startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize L2 bridge domain with MACIP ACLs on DUT1 in 3-node circular topology
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-10kflows-ndrpdr.robot
index 45c0577b98..7e471fa86d 100644
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-10kflows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | MACIP | ACL_STATELESS
-| ... | IACL | ACL10 | 10K_FLOWS
+| ... | IACL | ACL10 | 10K_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit
@@ -74,7 +75,7 @@
*** Keywords ***
| Local Template
-| | [Documentation] | FIXME.
+| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing config.
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
@@ -89,11 +90,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply Startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize L2 bridge domain with MACIP ACLs on DUT1 in 3-node circular topology
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-100flows-ndrpdr.robot
index a6f6b8fd07..4e74b54940 100644
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-100flows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-100flows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | MACIP | ACL_STATELESS
-| ... | IACL | ACL1 | 100_FLOWS
+| ... | IACL | ACL1 | 100_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -49,9 +49,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit
@@ -73,7 +74,7 @@
*** Keywords ***
| Local Template
-| | [Documentation] | FIXME.
+| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing config.
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
@@ -88,11 +89,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply Startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize L2 bridge domain with MACIP ACLs on DUT1 in 3-node circular topology
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-100kflows-ndrpdr.robot
index 9232d2147a..4e54487061 100644
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-100kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-100kflows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | MACIP | ACL_STATELESS
-| ... | IACL | ACL1 | 100K_FLOWS
+| ... | IACL | ACL1 | 100K_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -49,9 +49,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit
@@ -73,7 +74,7 @@
*** Keywords ***
| Local Template
-| | [Documentation] | FIXME.
+| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing config.
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
@@ -88,11 +89,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply Startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize L2 bridge domain with MACIP ACLs on DUT1 in 3-node circular topology
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-10kflows-ndrpdr.robot
index db1012b18b..3634cb7bf8 100644
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-10kflows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | MACIP | ACL_STATELESS
-| ... | IACL | ACL1 | 10K_FLOWS
+| ... | IACL | ACL1 | 10K_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -49,9 +49,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit
@@ -73,7 +74,7 @@
*** Keywords ***
| Local Template
-| | [Documentation] | FIXME.
+| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing config.
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
@@ -88,11 +89,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply Startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize L2 bridge domain with MACIP ACLs on DUT1 in 3-node circular topology
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-100flows-ndrpdr.robot
index da7e12c9b8..a71a465799 100644
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-100flows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-100flows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | MACIP | ACL_STATELESS
-| ... | IACL | ACL50 | 100_FLOWS
+| ... | IACL | ACL50 | 100_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -49,9 +49,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit
@@ -73,7 +74,7 @@
*** Keywords ***
| Local Template
-| | [Documentation] | FIXME.
+| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing config.
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
@@ -88,11 +89,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply Startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize L2 bridge domain with MACIP ACLs on DUT1 in 3-node circular topology
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-100kflows-ndrpdr.robot
index 7e193557ff..6c502d6c05 100644
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-100kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-100kflows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | MACIP | ACL_STATELESS
-| ... | IACL | ACL50 | 100K_FLOWS
+| ... | IACL | ACL50 | 100K_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -49,9 +49,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit
@@ -73,7 +74,7 @@
*** Keywords ***
| Local Template
-| | [Documentation] | FIXME.
+| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing config.
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
@@ -88,11 +89,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply Startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize L2 bridge domain with MACIP ACLs on DUT1 in 3-node circular topology
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-ndrpdr.robot
index 8e68e77709..dc14784d1a 100644
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | MACIP | ACL_STATELESS
-| ... | IACL | ACL50 | 10K_FLOWS
+| ... | IACL | ACL50 | 10K_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -49,9 +49,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit
@@ -73,7 +74,7 @@
*** Keywords ***
| Local Template
-| | [Documentation] | FIXME.
+| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing config.
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
@@ -88,11 +89,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply Startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize L2 bridge domain with MACIP ACLs on DUT1 in 3-node circular topology
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-ndrpdr.robot
index 4bad45f188..019979416f 100644
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-ndrpdr.robot
@@ -15,7 +15,7 @@
| Resource | resources/libraries/robot/shared/default.robot
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | L2BDBASE
+| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | L2BDBASE | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -45,9 +45,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${0}
# Traffic profile:
| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254
@@ -69,10 +70,10 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply Startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
| | And Initialize L2 bridge domain
diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-100flows-ndrpdr.robot
index 1b26ed03c4..93e9f4c8fa 100644
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-100flows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-100flows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATEFUL
-| ... | OACL | ACL10 | 100_FLOWS
+| ... | OACL | ACL10 | 100_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -49,9 +49,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit+reflect
@@ -72,7 +73,7 @@
*** Keywords ***
| Local Template
-| | [Documentation] | FIXME.
+| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing config.
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
@@ -87,11 +88,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply Startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-100kflows-ndrpdr.robot
index c9489a5573..f2b73c51c2 100644
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-100kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-100kflows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATEFUL
-| ... | OACL | ACL10 | 100K_FLOWS
+| ... | OACL | ACL10 | 100K_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -49,9 +49,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit+reflect
@@ -72,7 +73,7 @@
*** Keywords ***
| Local Template
-| | [Documentation] | FIXME.
+| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing config.
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
@@ -87,11 +88,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply Startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-10kflows-ndrpdr.robot
index 13ce8de0be..c2beb2b79b 100644
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-10kflows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATEFUL
-| ... | OACL | ACL10 | 10K_FLOWS
+| ... | OACL | ACL10 | 10K_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -49,9 +49,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit+reflect
@@ -72,7 +73,7 @@
*** Keywords ***
| Local Template
-| | [Documentation] | FIXME.
+| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing config.
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
@@ -87,11 +88,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply Startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-100flows-ndrpdr.robot
index d731c587a4..c666a6cfd5 100644
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-100flows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-100flows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATELESS
-| ... | OACL | ACL10 | 100_FLOWS
+| ... | OACL | ACL10 | 100_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -49,9 +49,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit
@@ -72,7 +73,7 @@
*** Keywords ***
| Local Template
-| | [Documentation] | FIXME.
+| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing config.
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
@@ -87,11 +88,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply Startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-100kflows-ndrpdr.robot
index 0f86ea68c8..cb638073af 100644
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-100kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-100kflows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATELESS
-| ... | OACL | ACL10 | 100K_FLOWS
+| ... | OACL | ACL10 | 100K_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -49,9 +49,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit
@@ -72,7 +73,7 @@
*** Keywords ***
| Local Template
-| | [Documentation] | FIXME.
+| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing config.
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
@@ -87,11 +88,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply Startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-10kflows-ndrpdr.robot
index ea0333f254..26244a440e 100644
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-10kflows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATELESS
-| ... | OACL | ACL10 | 10K_FLOWS
+| ... | OACL | ACL10 | 10K_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -49,9 +49,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit
@@ -72,7 +73,7 @@
*** Keywords ***
| Local Template
-| | [Documentation] | FIXME.
+| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing config.
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
@@ -87,11 +88,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply Startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-100flows-ndrpdr.robot
index d91f710e9c..9155f7ea2c 100644
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-100flows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-100flows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATEFUL
-| ... | OACL | ACL1 | 100_FLOWS
+| ... | OACL | ACL1 | 100_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -49,9 +49,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit+reflect
@@ -72,7 +73,7 @@
*** Keywords ***
| Local Template
-| | [Documentation] | FIXME.
+| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing config.
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
@@ -87,11 +88,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply Startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-100kflows-ndrpdr.robot
index a9e21eaadc..0a2aba2e6f 100644
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-100kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-100kflows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATEFUL
-| ... | OACL | ACL1 | 100K_FLOWS
+| ... | OACL | ACL1 | 100K_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -49,9 +49,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit+reflect
@@ -87,11 +88,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply Startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-10kflows-ndrpdr.robot
index 1a5bb16e06..a800db734e 100644
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-10kflows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATEFUL
-| ... | OACL | ACL1 | 10K_FLOWS
+| ... | OACL | ACL1 | 10K_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -49,9 +49,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit+reflect
@@ -72,7 +73,7 @@
*** Keywords ***
| Local Template
-| | [Documentation] | FIXME.
+| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing config.
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
@@ -87,11 +88,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply Startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-100flows-ndrpdr.robot
index 8dbfe77c2c..431a0c5601 100644
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-100flows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-100flows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATELESS
-| ... | OACL | ACL1 | 100_FLOWS
+| ... | OACL | ACL1 | 100_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -49,9 +49,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit
@@ -72,7 +73,7 @@
*** Keywords ***
| Local Template
-| | [Documentation] | FIXME.
+| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing config.
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
@@ -87,11 +88,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply Startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-100kflows-ndrpdr.robot
index c97086d6d2..040611fa9a 100644
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-100kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-100kflows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATELESS
-| ... | OACL | ACL1 | 100K_FLOWS
+| ... | OACL | ACL1 | 100K_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -49,9 +49,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit
@@ -72,7 +73,7 @@
*** Keywords ***
| Local Template
-| | [Documentation] | FIXME.
+| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing config.
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
@@ -87,11 +88,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply Startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-10kflows-ndrpdr.robot
index f232714b88..fcb240eca5 100644
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-10kflows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATELESS
-| ... | OACL | ACL1 | 10K_FLOWS
+| ... | OACL | ACL1 | 10K_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -49,9 +49,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit
@@ -72,7 +73,7 @@
*** Keywords ***
| Local Template
-| | [Documentation] | FIXME.
+| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing config.
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
@@ -87,11 +88,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply Startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-100flows-ndrpdr.robot
index 182b38b8d1..17e08f0604 100644
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-100flows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-100flows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATEFUL
-| ... | OACL | ACL50 | 100_FLOWS
+| ... | OACL | ACL50 | 100_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -49,9 +49,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit+reflect
@@ -72,7 +73,7 @@
*** Keywords ***
| Local Template
-| | [Documentation] | FIXME.
+| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing config.
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
@@ -87,11 +88,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply Startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-100kflows-ndrpdr.robot
index 654985b4e7..1040a43177 100644
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-100kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-100kflows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATEFUL
-| ... | OACL | ACL50 | 100K_FLOWS
+| ... | OACL | ACL50 | 100K_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -49,9 +49,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit+reflect
@@ -72,7 +73,7 @@
*** Keywords ***
| Local Template
-| | [Documentation] | FIXME.
+| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing config.
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
@@ -87,11 +88,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply Startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-10kflows-ndrpdr.robot
index d6076c5a76..d4d34b57b0 100644
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-10kflows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATEFUL
-| ... | OACL | ACL50 | 10K_FLOWS
+| ... | OACL | ACL50 | 10K_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -49,9 +49,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit+reflect
@@ -72,7 +73,7 @@
*** Keywords ***
| Local Template
-| | [Documentation] | FIXME.
+| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing config.
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
@@ -87,11 +88,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply Startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-100flows-ndrpdr.robot
index 8647761536..89f62c67cb 100644
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-100flows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-100flows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATELESS
-| ... | OACL | ACL50 | 100_FLOWS
+| ... | OACL | ACL50 | 100_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -49,9 +49,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit
@@ -72,7 +73,7 @@
*** Keywords ***
| Local Template
-| | [Documentation] | FIXME.
+| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing config.
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
@@ -87,11 +88,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply Startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-100kflows-ndrpdr.robot
index 9f169de2a9..e7c2633d24 100644
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-100kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-100kflows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATELESS
-| ... | OACL | ACL50 | 100K_FLOWS
+| ... | OACL | ACL50 | 100K_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -49,9 +49,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit
@@ -72,7 +73,7 @@
*** Keywords ***
| Local Template
-| | [Documentation] | FIXME.
+| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing config.
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
@@ -87,11 +88,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply Startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-10kflows-ndrpdr.robot
index 7bb482e576..c52054c2ce 100644
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-10kflows-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-10kflows-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATELESS
-| ... | OACL | ACL50 | 10K_FLOWS
+| ... | OACL | ACL50 | 10K_FLOWS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -49,9 +49,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit
@@ -72,7 +73,7 @@
*** Keywords ***
| Local Template
-| | [Documentation] | FIXME.
+| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing config.
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
@@ -87,11 +88,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply Startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale100kmaclrn-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale100kmaclrn-ndrpdr.robot
index a0c6d33c26..361cddfbe2 100644
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale100kmaclrn-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale100kmaclrn-ndrpdr.robot
@@ -16,6 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | SCALE | L2BDSCALE | FIB_100K
+| ... | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -49,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${0}
# Traffic profile:
| ${traffic_profile}= | trex-sl-3n-ethip4-macsrc50kdst50k
@@ -73,10 +75,10 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply Startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
| | And Initialize L2 bridge domain
diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale10kmaclrn-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale10kmaclrn-ndrpdr.robot
index 0164ab9480..eccbdb45e0 100644
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale10kmaclrn-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale10kmaclrn-ndrpdr.robot
@@ -16,6 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | SCALE | L2BDSCALE | FIB_10K
+| ... | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -49,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${0}
# Traffic profile:
| ${traffic_profile}= | trex-sl-3n-ethip4-macsrc5kdst5k
@@ -73,10 +75,10 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply Startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
| | And Initialize L2 bridge domain
diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale1mmaclrn-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale1mmaclrn-ndrpdr.robot
index 45e2016c85..2ca32e1c36 100644
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale1mmaclrn-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale1mmaclrn-ndrpdr.robot
@@ -16,6 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | SCALE | L2BDSCALE | FIB_1M
+| ... | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -49,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${0}
# Traffic profile:
| ${traffic_profile}= | trex-sl-3n-ethip4-macsrc500kdst500k
@@ -73,10 +75,10 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply Startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
| | And Initialize L2 bridge domain
diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2patch-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2patch-ndrpdr.robot
index 25b93906d3..75bc40fa90 100644
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2patch-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2patch-ndrpdr.robot
@@ -15,7 +15,7 @@
| Resource | resources/libraries/robot/shared/default.robot
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | L2PATCH | BASE
+| ... | NIC_Intel-X710 | ETH | L2PATCH | BASE | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -45,9 +45,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${0}
# Traffic profile:
| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254
@@ -69,11 +70,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply Startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize L2 patch
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2xcbase-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2xcbase-ndrpdr.robot
index 2907a4fde8..83b252b2e3 100644
--- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2xcbase-ndrpdr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2xcbase-ndrpdr.robot
@@ -15,7 +15,7 @@
| Resource | resources/libraries/robot/shared/default.robot
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | L2XCFWD | BASE | L2XCBASE
+| ... | NIC_Intel-X710 | ETH | L2XCFWD | BASE | L2XCBASE | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -45,9 +45,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${0}
# Traffic profile:
| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254
@@ -69,11 +70,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply Startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize L2 xconnect in 3-node circular topology
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-avf-dot1q-l2bdbasemaclrn-gbp-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-avf-dot1q-l2bdbasemaclrn-gbp-ndrpdr.robot
index 7f59192428..3f406fb668 100644
--- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-avf-dot1q-l2bdbasemaclrn-gbp-ndrpdr.robot
+++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-avf-dot1q-l2bdbasemaclrn-gbp-ndrpdr.robot
@@ -18,7 +18,7 @@
| ... | NIC_Intel-X710 | DOT1Q | L2BDMACLRN | BASE | DRV_AVF | GBP
| ...
| Suite Setup | Setup suite single link | performance_avf
-| Suite Teardown | Tear down suite | performance | vifs
+| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test
| Test Teardown | Tear down test | performance
| ...
@@ -55,11 +55,11 @@
| ... | *[Ref] Applicable standard specifications:* RFC2544.
*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so | avf_plugin.so | gbp_plugin.so
-| ... | acl_plugin.so
-| ${osi_layer}= | L2
+| @{plugins_to_enable}= | avf_plugin.so | gbp_plugin.so | acl_plugin.so
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | avf
+| ${osi_layer}= | L2
| ${overhead}= | ${4}
# Traffic profile:
| ${traffic_profile}= | trex-sl-dot1qip4-vlan1ip4src254ip4dst254-bvi
@@ -81,10 +81,10 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add DPDK no PCI to all DUTs
-| | And Set Max Rate And Jumbo
-| | And Apply startup configuration on all VPP DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply Startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
| | And Initialize layer dot1q
diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-avf-dot1q-l2bdbasemaclrn-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-avf-dot1q-l2bdbasemaclrn-ndrpdr.robot
index d5d3596c8e..93f993838c 100644
--- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-avf-dot1q-l2bdbasemaclrn-ndrpdr.robot
+++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-avf-dot1q-l2bdbasemaclrn-ndrpdr.robot
@@ -18,7 +18,7 @@
| ... | NIC_Intel-X710 | DOT1Q | L2BDMACLRN | BASE | DRV_AVF
| ...
| Suite Setup | Setup suite single link | performance_avf
-| Suite Teardown | Tear down suite | performance | vifs
+| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test
| Test Teardown | Tear down test | performance
| ...
@@ -48,10 +48,11 @@
| ... | *[Ref] Applicable standard specifications:* RFC2544.
*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so | avf_plugin.so
-| ${osi_layer}= | L2
+| @{plugins_to_enable}= | avf_plugin.so
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | avf
+| ${osi_layer}= | L2
| ${overhead}= | ${4}
# Traffic profile:
| ${traffic_profile}= | trex-sl-dot1qip4-vlan1ip4src254ip4dst254
@@ -73,10 +74,10 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add DPDK no PCI to all DUTs
-| | And Set Max Rate And Jumbo
-| | And Apply startup configuration on all VPP DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply Startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
| | And Initialize layer dot1q
diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-avf-eth-l2bdbasemaclrn-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-avf-eth-l2bdbasemaclrn-ndrpdr.robot
index eaf267b145..3c591634f6 100644
--- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-avf-eth-l2bdbasemaclrn-ndrpdr.robot
+++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-avf-eth-l2bdbasemaclrn-ndrpdr.robot
@@ -18,7 +18,7 @@
| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | DRV_AVF
| ...
| Suite Setup | Setup suite single link | performance_avf
-| Suite Teardown | Tear down suite | performance | vifs
+| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test
| Test Teardown | Tear down test | performance
| ...
@@ -46,10 +46,11 @@
| ... | *[Ref] Applicable standard specifications:* RFC2544.
*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so | avf_plugin.so
-| ${osi_layer}= | L2
+| @{plugins_to_enable}= | avf_plugin.so
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | avf
+| ${osi_layer}= | L2
| ${overhead}= | ${0}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n-ethip4-ip4src254
@@ -70,10 +71,10 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add DPDK no PCI to all DUTs
-| | And Set Max Rate And Jumbo
-| | And Apply startup configuration on all VPP DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply Startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
| | And Initialize L2 bridge domain
diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-avf-eth-l2patch-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-avf-eth-l2patch-ndrpdr.robot
index 079d58d292..e48b920277 100644
--- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-avf-eth-l2patch-ndrpdr.robot
+++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-avf-eth-l2patch-ndrpdr.robot
@@ -18,7 +18,7 @@
| ... | NIC_Intel-X710 | ETH | L2PATCH | BASE | DRV_AVF
| ...
| Suite Setup | Setup suite single link | performance_avf
-| Suite Teardown | Tear down suite | performance | vifs
+| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test
| Test Teardown | Tear down test | performance
| ...
@@ -45,10 +45,11 @@
| ... | *[Ref] Applicable standard specifications:* RFC2544.
*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so | avf_plugin.so
-| ${osi_layer}= | L2
+| @{plugins_to_enable}= | avf_plugin.so
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | avf
+| ${osi_layer}= | L2
| ${overhead}= | ${0}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n-ethip4-ip4src254
@@ -70,11 +71,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add DPDK no PCI to all DUTs
-| | And Set Max Rate And Jumbo
-| | And Apply startup configuration on all VPP DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply Startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize L2 patch
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-avf-eth-l2xcbase-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-avf-eth-l2xcbase-ndrpdr.robot
index 7419f824dc..87f80dca50 100644
--- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-avf-eth-l2xcbase-ndrpdr.robot
+++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-avf-eth-l2xcbase-ndrpdr.robot
@@ -18,7 +18,7 @@
| ... | NIC_Intel-X710 | ETH | L2XCFWD | BASE | L2XCBASE | DRV_AVF
| ...
| Suite Setup | Setup suite single link | performance_avf
-| Suite Teardown | Tear down suite | performance | vifs
+| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test
| Test Teardown | Tear down test | performance
| ...
@@ -44,10 +44,11 @@
| ... | *[Ref] Applicable standard specifications:* RFC2544.
*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so | avf_plugin.so
-| ${osi_layer}= | L2
+| @{plugins_to_enable}= | avf_plugin.so
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | avf
+| ${osi_layer}= | L2
| ${overhead}= | ${0}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n-ethip4-ip4src254
@@ -69,11 +70,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add DPDK no PCI to all DUTs
-| | And Set Max Rate And Jumbo
-| | And Apply startup configuration on all VPP DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply Startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize L2 Xconnect In 2-node Circular Topology
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-ndrpdr.robot
index 0166470762..14d1aeb5e0 100644
--- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-ndrpdr.robot
+++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-ndrpdr.robot
@@ -15,7 +15,7 @@
| Resource | resources/libraries/robot/shared/default.robot
| ...
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | BASE | DOT1Q | L2BDMACLRN
+| ... | NIC_Intel-X710 | BASE | DOT1Q | L2BDMACLRN | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -49,9 +49,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${4}
# Traffic profile:
| ${traffic_profile}= | trex-sl-dot1qip4-vlan1ip4src254ip4dst254
@@ -73,10 +74,10 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply Startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
| | And Initialize layer dot1q
diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-dot1q-l2xcbase-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-dot1q-l2xcbase-ndrpdr.robot
index 562c26de29..9cc1f19105 100644
--- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-dot1q-l2xcbase-ndrpdr.robot
+++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-dot1q-l2xcbase-ndrpdr.robot
@@ -16,7 +16,7 @@
| Resource | resources/libraries/robot/l2/tagging.robot
| ...
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | L2XCFWD | BASE | DOT1Q
+| ... | NIC_Intel-X710 | L2XCFWD | BASE | DOT1Q | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -48,9 +48,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${4}
| ${subid}= | 10
| ${tag_rewrite}= | pop-1
@@ -74,11 +75,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply Startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize VLAN dot1q sub-interfaces in circular topology
| | ... | ${dut1} | ${dut1_if2} | SUB_ID=${subid}
| | And Configure L2 tag rewrite method on interfaces
diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-ndrpdr.robot
index 77af4e6a88..5ec047b8c3 100644
--- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-ndrpdr.robot
+++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-ndrpdr.robot
@@ -15,7 +15,7 @@
| Resource | resources/libraries/robot/shared/default.robot
| ...
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | L2BDBASE
+| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | L2BDBASE | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -45,9 +45,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${0}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n-ethip4-ip4src254
@@ -69,10 +70,10 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply Startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
| | And Initialize L2 bridge domain
diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale100kmaclrn-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale100kmaclrn-ndrpdr.robot
index 9ce2d37579..9f0ae4755f 100644
--- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale100kmaclrn-ndrpdr.robot
+++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale100kmaclrn-ndrpdr.robot
@@ -16,6 +16,7 @@
| ...
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | SCALE | L2BDSCALE | FIB_100k
+| ... | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -49,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${0}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n-ethip4-macsrc50kdst50k
@@ -73,10 +75,10 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply Startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
| | And Initialize L2 bridge domain
diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale10kmaclrn-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale10kmaclrn-ndrpdr.robot
index 6f48822647..662594de96 100644
--- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale10kmaclrn-ndrpdr.robot
+++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale10kmaclrn-ndrpdr.robot
@@ -16,6 +16,7 @@
| ...
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | SCALE | L2BDSCALE | FIB_10k
+| ... | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -49,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${0}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n-ethip4-macsrc5kdst5k
@@ -73,10 +75,10 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply Startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
| | And Initialize L2 bridge domain
diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale1mmaclrn-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale1mmaclrn-ndrpdr.robot
index 1e70c0af87..5ccb0b0eb1 100644
--- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale1mmaclrn-ndrpdr.robot
+++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale1mmaclrn-ndrpdr.robot
@@ -16,6 +16,7 @@
| ...
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | SCALE | L2BDSCALE | FIB_1M
+| ... | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -49,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${0}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n-ethip4-macsrc500kdst500k
@@ -73,10 +75,10 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply Startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
| | And Initialize L2 bridge domain
diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2patch-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2patch-ndrpdr.robot
index fdd7cb953f..fe83f0ff9b 100644
--- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2patch-ndrpdr.robot
+++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2patch-ndrpdr.robot
@@ -15,7 +15,7 @@
| Resource | resources/libraries/robot/shared/default.robot
| ...
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | L2PATCH | BASE
+| ... | NIC_Intel-X710 | ETH | L2PATCH | BASE | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -45,9 +45,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${0}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n-ethip4-ip4src254
@@ -69,11 +70,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply Startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize L2 patch
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2xcbase-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2xcbase-ndrpdr.robot
index ce48d4ef15..44e0d70bc5 100644
--- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2xcbase-ndrpdr.robot
+++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2xcbase-ndrpdr.robot
@@ -15,7 +15,7 @@
| Resource | resources/libraries/robot/shared/default.robot
| ...
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | L2XCFWD | BASE | L2XCBASE
+| ... | NIC_Intel-X710 | ETH | L2XCFWD | BASE | L2XCBASE | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -45,9 +45,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${0}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n-ethip4-ip4src254
@@ -69,11 +70,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply Startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize L2 xconnect in 2-node circular topology
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/lb/2n1l-10ge2p1x710-ethip4-loadbalancer-maglev-ndrpdr.robot b/tests/vpp/perf/lb/2n1l-10ge2p1x710-ethip4-loadbalancer-maglev-ndrpdr.robot
index bf706f37c1..4e26e7a188 100644
--- a/tests/vpp/perf/lb/2n1l-10ge2p1x710-ethip4-loadbalancer-maglev-ndrpdr.robot
+++ b/tests/vpp/perf/lb/2n1l-10ge2p1x710-ethip4-loadbalancer-maglev-ndrpdr.robot
@@ -15,7 +15,7 @@
| Resource | resources/libraries/robot/shared/default.robot
| ...
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | IP4 | LOADBALANCER
+| ... | NIC_Intel-X710 | ETH | IP4 | LOADBALANCER | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -46,9 +46,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | lb_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n-ethip4udp-lb
@@ -70,11 +71,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize loadbalancer maglev
| | Then Find NDR and PDR intervals using optimized search
| | ... | traffic_directions=${1}
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-10ch-20mif-10dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-10ch-20mif-10dcr1t-vppip4-ndrpdr.robot
index e90415f8e5..ef9ee46c64 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-10ch-20mif-10dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-10ch-20mif-10dcr1t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
@@ -81,9 +82,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-10ch-20mif-10dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-10ch-20mif-10dcr2t-vppip4-ndrpdr.robot
index 44c1341198..13428f6a47 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-10ch-20mif-10dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-10ch-20mif-10dcr2t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -81,9 +82,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-10ch-40mif-20dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-10ch-40mif-20dcr1t-vppip4-ndrpdr.robot
index e5e0981cc8..5cdd7f4137 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-10ch-40mif-20dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-10ch-40mif-20dcr1t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
@@ -81,9 +82,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-12mif-6dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-12mif-6dcr1t-vppip4-ndrpdr.robot
index 167804ca39..b6af87c63d 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-12mif-6dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-12mif-6dcr1t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
@@ -81,9 +82,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-12mif-6dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-12mif-6dcr2t-vppip4-ndrpdr.robot
index eeb59ed8e9..751f676d1a 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-12mif-6dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-12mif-6dcr2t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -81,9 +82,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-16mif-8dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-16mif-8dcr1t-vppip4-ndrpdr.robot
index 3ec3801f1f..b297db11b2 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-16mif-8dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-16mif-8dcr1t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
@@ -81,9 +82,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-16mif-8dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-16mif-8dcr2t-vppip4-ndrpdr.robot
index 219a8783c4..7637d99bc8 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-16mif-8dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-16mif-8dcr2t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -81,9 +82,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-20mif-10dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-20mif-10dcr1t-vppip4-ndrpdr.robot
index c4092b0b55..c96104c8b5 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-20mif-10dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-20mif-10dcr1t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
@@ -81,9 +82,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-20mif-10dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-20mif-10dcr2t-vppip4-ndrpdr.robot
index cb1f7b2bee..1a3b35215b 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-20mif-10dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-20mif-10dcr2t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -81,9 +82,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-2mif-1dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-2mif-1dcr1t-vppip4-ndrpdr.robot
index 0446d10033..c8383168cf 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-2mif-1dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-2mif-1dcr1t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
@@ -81,9 +82,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-2mif-1dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-2mif-1dcr2t-vppip4-ndrpdr.robot
index fd9398cd17..fdba4d7515 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-2mif-1dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-2mif-1dcr2t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -81,9 +82,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-4mif-2dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-4mif-2dcr1t-vppip4-ndrpdr.robot
index ac97de5a17..be4d830c45 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-4mif-2dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-4mif-2dcr1t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
@@ -81,9 +82,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-4mif-2dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-4mif-2dcr2t-vppip4-ndrpdr.robot
index 353cf75cf6..0858370b1d 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-4mif-2dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-4mif-2dcr2t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -81,9 +82,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-8mif-4dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-8mif-4dcr1t-vppip4-ndrpdr.robot
index 1dfa8581eb..647bb1cd56 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-8mif-4dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-8mif-4dcr1t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
@@ -81,9 +82,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-8mif-4dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-8mif-4dcr2t-vppip4-ndrpdr.robot
index 23feb4ec18..c3d4cc60ce 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-8mif-4dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-8mif-4dcr2t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -81,9 +82,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-16mif-8dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-16mif-8dcr1t-vppip4-ndrpdr.robot
index cf408114d5..fbc69cc0fc 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-16mif-8dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-16mif-8dcr1t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
@@ -81,9 +82,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-16mif-8dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-16mif-8dcr2t-vppip4-ndrpdr.robot
index e5296c3849..060a4e14e8 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-16mif-8dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-16mif-8dcr2t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -81,9 +82,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-24mif-12dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-24mif-12dcr1t-vppip4-ndrpdr.robot
index e967975642..9676d3a2fc 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-24mif-12dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-24mif-12dcr1t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
@@ -81,9 +82,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-24mif-12dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-24mif-12dcr2t-vppip4-ndrpdr.robot
index ab71d20bf6..ae9b67ad8e 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-24mif-12dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-24mif-12dcr2t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -81,9 +82,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-32mif-16dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-32mif-16dcr1t-vppip4-ndrpdr.robot
index 2ee3efcce6..fe4ad05f2a 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-32mif-16dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-32mif-16dcr1t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
@@ -81,9 +82,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-32mif-16dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-32mif-16dcr2t-vppip4-ndrpdr.robot
index 7d867db234..e10c6be4d7 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-32mif-16dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-32mif-16dcr2t-vppip4-ndrpdr.robot
@@ -51,9 +51,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -82,9 +83,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-40mif-20dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-40mif-20dcr1t-vppip4-ndrpdr.robot
index e90c9c3da4..d2c72903ce 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-40mif-20dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-40mif-20dcr1t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
@@ -81,9 +82,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-4mif-2dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-4mif-2dcr1t-vppip4-ndrpdr.robot
index 7203f343a1..eaa25baa0a 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-4mif-2dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-4mif-2dcr1t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
@@ -81,9 +82,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-4mif-2dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-4mif-2dcr2t-vppip4-ndrpdr.robot
index 802f81e25d..1133e8173c 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-4mif-2dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-4mif-2dcr2t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -81,9 +82,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-8mif-4dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-8mif-4dcr1t-vppip4-ndrpdr.robot
index b43ba36af9..e29af87a9f 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-8mif-4dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-8mif-4dcr1t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
@@ -81,9 +82,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-8mif-4dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-8mif-4dcr2t-vppip4-ndrpdr.robot
index d00b76f181..ce8df60748 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-8mif-4dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-8mif-4dcr2t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -81,9 +82,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-16mif-8dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-16mif-8dcr1t-vppip4-ndrpdr.robot
index a9ceb47da0..6fa196e608 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-16mif-8dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-16mif-8dcr1t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
@@ -81,9 +82,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-16mif-8dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-16mif-8dcr2t-vppip4-ndrpdr.robot
index 7c1972f1db..72945a985b 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-16mif-8dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-16mif-8dcr2t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -81,9 +82,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-32mif-16dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-32mif-16dcr1t-vppip4-ndrpdr.robot
index 2e22143958..a22da7f98e 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-32mif-16dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-32mif-16dcr1t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
@@ -81,9 +82,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-32mif-16dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-32mif-16dcr2t-vppip4-ndrpdr.robot
index 1f7ba52989..842e2f9ad3 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-32mif-16dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-32mif-16dcr2t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -81,9 +82,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-48mif-24dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-48mif-24dcr1t-vppip4-ndrpdr.robot
index 414bae8e33..6a946044b3 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-48mif-24dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-48mif-24dcr1t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
@@ -81,9 +82,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-8mif-4dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-8mif-4dcr1t-vppip4-ndrpdr.robot
index bd19fa7309..2d2cd843ba 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-8mif-4dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-8mif-4dcr1t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
@@ -81,9 +82,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-8mif-4dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-8mif-4dcr2t-vppip4-ndrpdr.robot
index 0eed0a8a16..0c661c04c8 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-8mif-4dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-8mif-4dcr2t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -81,9 +82,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-12mif-6dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-12mif-6dcr1t-vppip4-ndrpdr.robot
index 693135706e..f166e62fc0 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-12mif-6dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-12mif-6dcr1t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
@@ -81,9 +82,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-12mif-6dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-12mif-6dcr2t-vppip4-ndrpdr.robot
index 85c3c62e89..5c2111ab65 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-12mif-6dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-12mif-6dcr2t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -81,9 +82,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-24mif-12dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-24mif-12dcr1t-vppip4-ndrpdr.robot
index 73d57bba20..4fe3b85869 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-24mif-12dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-24mif-12dcr1t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
@@ -81,9 +82,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-24mif-12dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-24mif-12dcr2t-vppip4-ndrpdr.robot
index d9c95c4af7..993a5f23ff 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-24mif-12dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-24mif-12dcr2t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -81,9 +82,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-48mif-24dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-48mif-24dcr1t-vppip4-ndrpdr.robot
index 99bfc25ea2..5b7fbe1d14 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-48mif-24dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-48mif-24dcr1t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
@@ -81,9 +82,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-16mif-8dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-16mif-8dcr1t-vppip4-ndrpdr.robot
index beede2b31e..61ff3d0bb4 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-16mif-8dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-16mif-8dcr1t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
@@ -81,9 +82,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-16mif-8dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-16mif-8dcr2t-vppip4-ndrpdr.robot
index 2379bb130d..7383211148 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-16mif-8dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-16mif-8dcr2t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -81,9 +82,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-32mif-16dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-32mif-16dcr1t-vppip4-ndrpdr.robot
index e934a7cc50..abfad09ba9 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-32mif-16dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-32mif-16dcr1t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
@@ -81,9 +82,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-32mif-16dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-32mif-16dcr2t-vppip4-ndrpdr.robot
index 7a5990c44d..cfb7d72f32 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-32mif-16dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-32mif-16dcr2t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -81,9 +82,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-10pl-20mif-10dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-10pl-20mif-10dcr1t-vppip4-ndrpdr.robot
index 4bcd1d3fd1..b4f3aa3097 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-10pl-20mif-10dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-10pl-20mif-10dcr1t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
@@ -81,9 +82,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-10pl-20mif-10dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-10pl-20mif-10dcr2t-vppip4-ndrpdr.robot
index 02793a4c31..c7943ee66b 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-10pl-20mif-10dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-10pl-20mif-10dcr2t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -81,9 +82,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-10pl-20mif-20dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-10pl-20mif-20dcr1t-vppip4-ndrpdr.robot
index 07f4ee8750..34bf3fd310 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-10pl-20mif-20dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-10pl-20mif-20dcr1t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
@@ -81,9 +82,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-10dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-10dcr1t-vppip4-ndrpdr.robot
index d072b576b5..f1d5ca2a55 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-10dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-10dcr1t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
@@ -81,9 +82,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-10dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-10dcr2t-vppip4-ndrpdr.robot
index 025b76acf0..97ed296ba1 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-10dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-10dcr2t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -81,9 +82,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-1dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-1dcr1t-vppip4-ndrpdr.robot
index 4f3277121e..54c77572dd 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-1dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-1dcr1t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
@@ -81,9 +82,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-1dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-1dcr2t-vppip4-ndrpdr.robot
index e5f3ce0591..10a2d17c69 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-1dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-1dcr2t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -81,9 +82,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-2dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-2dcr1t-vppip4-ndrpdr.robot
index 0d2cb15395..ad48e39470 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-2dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-2dcr1t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
@@ -81,9 +82,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-2dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-2dcr2t-vppip4-ndrpdr.robot
index 8d6ff46603..cd109e1ad2 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-2dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-2dcr2t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -81,9 +82,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-4dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-4dcr1t-vppip4-ndrpdr.robot
index 364cdb0a50..6ffdd3b744 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-4dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-4dcr1t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
@@ -81,9 +82,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-4dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-4dcr2t-vppip4-ndrpdr.robot
index 0fb745bdb7..70e7d4c906 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-4dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-4dcr2t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -81,9 +82,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-6dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-6dcr1t-vppip4-ndrpdr.robot
index 25adc80903..e87442303a 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-6dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-6dcr1t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
@@ -81,9 +82,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-6dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-6dcr2t-vppip4-ndrpdr.robot
index 346b64730c..60ae9f2044 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-6dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-6dcr2t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -81,9 +82,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-8dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-8dcr1t-vppip4-ndrpdr.robot
index 9f7bcd41fc..cdb1b3584d 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-8dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-8dcr1t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
@@ -81,9 +82,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-8dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-8dcr2t-vppip4-ndrpdr.robot
index 892c66a864..13f82c30ca 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-8dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-8dcr2t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -81,9 +82,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-12dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-12dcr1t-vppip4-ndrpdr.robot
index 719aaf6aad..815bc24998 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-12dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-12dcr1t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
@@ -81,9 +82,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-12dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-12dcr2t-vppip4-ndrpdr.robot
index 5f0687e72c..610486f13a 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-12dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-12dcr2t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -81,9 +82,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-16dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-16dcr1t-vppip4-ndrpdr.robot
index 9d294931a0..7faf1d0bd4 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-16dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-16dcr1t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
@@ -81,9 +82,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-16dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-16dcr2t-vppip4-ndrpdr.robot
index 4709d3358a..2ed6f39945 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-16dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-16dcr2t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -81,9 +82,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-20dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-20dcr1t-vppip4-ndrpdr.robot
index 40d0760c6a..43e2f245ea 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-20dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-20dcr1t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
@@ -81,9 +82,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-2dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-2dcr1t-vppip4-ndrpdr.robot
index d0b4a03c09..a0a11af66f 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-2dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-2dcr1t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
@@ -81,9 +82,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-2dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-2dcr2t-vppip4-ndrpdr.robot
index 519ae96fe2..edb86eb041 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-2dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-2dcr2t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -81,9 +82,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-4dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-4dcr1t-vppip4-ndrpdr.robot
index 7197a32607..fa960d37c5 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-4dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-4dcr1t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
@@ -81,9 +82,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-4dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-4dcr2t-vppip4-ndrpdr.robot
index a559ecf7cf..5ecc2f73d5 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-4dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-4dcr2t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -81,9 +82,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-8dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-8dcr1t-vppip4-ndrpdr.robot
index 632abb79c2..183252add9 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-8dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-8dcr1t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
@@ -81,12 +82,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
-| | And Initialize layer interface
+| | And Initialize layer interface
| | ... | count=${nf_chains}
| | And Start containers for test
| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | auto_scale=${False}
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-8dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-8dcr2t-vppip4-ndrpdr.robot
index ebd0c7b588..d649efda5c 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-8dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-8dcr2t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -81,9 +82,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-8mif-4dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-8mif-4dcr1t-vppip4-ndrpdr.robot
index ded732b30a..ee319cf976 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-8mif-4dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-8mif-4dcr1t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
@@ -81,9 +82,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-8mif-4dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-8mif-4dcr2t-vppip4-ndrpdr.robot
index e10935727d..20d05faa5f 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-8mif-4dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-8mif-4dcr2t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -81,9 +82,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-16dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-16dcr1t-vppip4-ndrpdr.robot
index 3ec676bf63..e4bf9cf6cc 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-16dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-16dcr1t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
@@ -81,9 +82,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-16dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-16dcr2t-vppip4-ndrpdr.robot
index 9ca0003e90..da3f27a58f 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-16dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-16dcr2t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -81,9 +82,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-24dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-24dcr1t-vppip4-ndrpdr.robot
index 9f0276d6e5..4b4c73b69c 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-24dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-24dcr1t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
@@ -81,9 +82,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-8dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-8dcr1t-vppip4-ndrpdr.robot
index bf8788587c..88a0daf405 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-8dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-8dcr1t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
@@ -81,9 +82,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-8dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-8dcr2t-vppip4-ndrpdr.robot
index 66dd8d6f00..5f649b3acb 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-8dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-8dcr2t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -81,9 +82,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-12dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-12dcr1t-vppip4-ndrpdr.robot
index 25de6ec86c..9a50e96330 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-12dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-12dcr1t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
@@ -81,9 +82,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-12dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-12dcr2t-vppip4-ndrpdr.robot
index fa5b236f74..14420fd936 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-12dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-12dcr2t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -81,9 +82,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-24dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-24dcr1t-vppip4-ndrpdr.robot
index 29a088fc9e..4ae39afabf 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-24dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-24dcr1t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
@@ -81,9 +82,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-6dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-6dcr1t-vppip4-ndrpdr.robot
index 7ba36e1ee3..24683ae189 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-6dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-6dcr1t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
@@ -81,9 +82,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-6dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-6dcr2t-vppip4-ndrpdr.robot
index 2f0b7163eb..b3359f078b 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-6dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-6dcr2t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -81,9 +82,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-16dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-16dcr1t-vppip4-ndrpdr.robot
index 31ec2d6e5a..ea9e4f96dc 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-16dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-16dcr1t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
@@ -81,9 +82,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-16dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-16dcr2t-vppip4-ndrpdr.robot
index e11ad92154..74e99d61c6 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-16dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-16dcr2t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -81,9 +82,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-8dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-8dcr1t-vppip4-ndrpdr.robot
index 34ff2c6527..c509ad5638 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-8dcr1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-8dcr1t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
@@ -81,9 +82,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-8dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-8dcr2t-vppip4-ndrpdr.robot
index 44af947b85..5dbbc2ff96 100644
--- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-8dcr2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-8dcr2t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -81,9 +82,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-10ch-20vh-10vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-10ch-20vh-10vm1t-vppip4-ndrpdr.robot
index efd4ecc9ee..165e80fc6a 100644
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-10ch-20vh-10vm1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-10ch-20vh-10vm1t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
@@ -78,9 +79,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-10ch-20vh-10vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-10ch-20vh-10vm2t-vppip4-ndrpdr.robot
index ff35283377..9f0398beb0 100644
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-10ch-20vh-10vm2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-10ch-20vh-10vm2t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -78,9 +79,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-10ch-40vh-20vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-10ch-40vh-20vm1t-vppip4-ndrpdr.robot
index bb0bd03104..8cce3d84b8 100644
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-10ch-40vh-20vm1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-10ch-40vh-20vm1t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
@@ -78,9 +79,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-12vh-6vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-12vh-6vm1t-vppip4-ndrpdr.robot
index d0355df44c..a814f7133e 100644
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-12vh-6vm1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-12vh-6vm1t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
@@ -78,9 +79,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-12vh-6vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-12vh-6vm2t-vppip4-ndrpdr.robot
index 4c34fe7f5d..4eeaeaddb2 100644
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-12vh-6vm2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-12vh-6vm2t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -78,9 +79,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-16vh-8vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-16vh-8vm1t-vppip4-ndrpdr.robot
index 5e52d6a302..6b55ec5d4d 100644
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-16vh-8vm1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-16vh-8vm1t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
@@ -78,9 +79,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-16vh-8vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-16vh-8vm2t-vppip4-ndrpdr.robot
index b5098254b0..cbc364c853 100644
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-16vh-8vm2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-16vh-8vm2t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -78,9 +79,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-20vh-10vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-20vh-10vm1t-vppip4-ndrpdr.robot
index 3fcac8e942..94a02a4df8 100644
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-20vh-10vm1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-20vh-10vm1t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
@@ -78,9 +79,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-20vh-10vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-20vh-10vm2t-vppip4-ndrpdr.robot
index 91c351b712..9ad5bb4bf1 100644
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-20vh-10vm2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-20vh-10vm2t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -78,9 +79,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-2vh-1vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-2vh-1vm1t-vppip4-ndrpdr.robot
index cc17c82383..5fa1b41305 100644
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-2vh-1vm1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-2vh-1vm1t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
@@ -78,9 +79,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-2vh-1vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-2vh-1vm2t-vppip4-ndrpdr.robot
index b4b20f64fe..8f77c4ea9b 100644
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-2vh-1vm2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-2vh-1vm2t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -78,9 +79,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-4vh-2vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-4vh-2vm1t-vppip4-ndrpdr.robot
index 3f1bd66104..80d42aaa38 100644
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-4vh-2vm1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-4vh-2vm1t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
@@ -78,9 +79,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-4vh-2vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-4vh-2vm2t-vppip4-ndrpdr.robot
index 8fa70d5aac..44cb9cc1ad 100644
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-4vh-2vm2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-4vh-2vm2t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -78,9 +79,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-8vh-4vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-8vh-4vm1t-vppip4-ndrpdr.robot
index dfedbacba5..9e62ec9976 100644
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-8vh-4vm1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-8vh-4vm1t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
@@ -78,9 +79,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-8vh-4vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-8vh-4vm2t-vppip4-ndrpdr.robot
index 47c3c27231..9bf2e39a9f 100644
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-8vh-4vm2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-8vh-4vm2t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -78,9 +79,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-16vh-8vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-16vh-8vm1t-vppip4-ndrpdr.robot
index 05569541cc..9fc462c728 100644
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-16vh-8vm1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-16vh-8vm1t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
@@ -78,9 +79,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-16vh-8vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-16vh-8vm2t-vppip4-ndrpdr.robot
index 62a956ac46..68f6d4af57 100644
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-16vh-8vm2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-16vh-8vm2t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -78,9 +79,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-24vh-12vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-24vh-12vm1t-vppip4-ndrpdr.robot
index d5253d06a9..33929b6d47 100644
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-24vh-12vm1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-24vh-12vm1t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
@@ -78,9 +79,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-24vh-12vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-24vh-12vm2t-vppip4-ndrpdr.robot
index b4b6e0e070..073e2e714b 100644
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-24vh-12vm2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-24vh-12vm2t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -78,9 +79,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-32vh-16vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-32vh-16vm1t-vppip4-ndrpdr.robot
index 0de75bbd1f..953dd68bb7 100644
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-32vh-16vm1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-32vh-16vm1t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
@@ -78,9 +79,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-32vh-16vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-32vh-16vm2t-vppip4-ndrpdr.robot
index 2d5763ab24..648fd0f8e6 100644
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-32vh-16vm2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-32vh-16vm2t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -78,9 +79,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-40vh-20vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-40vh-20vm1t-vppip4-ndrpdr.robot
index 4f617f3f47..6f90d0c6b1 100644
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-40vh-20vm1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-40vh-20vm1t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
@@ -78,9 +79,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-4vh-2vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-4vh-2vm1t-vppip4-ndrpdr.robot
index 01f092a411..1fc9e37621 100644
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-4vh-2vm1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-4vh-2vm1t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
@@ -78,9 +79,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-4vh-2vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-4vh-2vm2t-vppip4-ndrpdr.robot
index 451ad0ee57..ad81387735 100644
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-4vh-2vm2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-4vh-2vm2t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -78,9 +79,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-8vh-4vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-8vh-4vm1t-vppip4-ndrpdr.robot
index c8a4874723..7a7ea7327c 100644
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-8vh-4vm1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-8vh-4vm1t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
@@ -78,9 +79,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-8vh-4vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-8vh-4vm2t-vppip4-ndrpdr.robot
index 40546dd964..e0d31feebc 100644
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-8vh-4vm2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-8vh-4vm2t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -78,9 +79,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-16vh-8vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-16vh-8vm1t-vppip4-ndrpdr.robot
index 1293e86738..3a8033d616 100644
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-16vh-8vm1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-16vh-8vm1t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
@@ -78,9 +79,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-16vh-8vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-16vh-8vm2t-vppip4-ndrpdr.robot
index ccbef818ff..d7d2510de2 100644
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-16vh-8vm2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-16vh-8vm2t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -78,9 +79,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-32vh-16vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-32vh-16vm1t-vppip4-ndrpdr.robot
index b6a3175d66..9df79f75c9 100644
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-32vh-16vm1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-32vh-16vm1t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
@@ -78,9 +79,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-32vh-16vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-32vh-16vm2t-vppip4-ndrpdr.robot
index fc369c4725..c60c6b59e2 100644
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-32vh-16vm2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-32vh-16vm2t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -78,9 +79,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-48vh-24vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-48vh-24vm1t-vppip4-ndrpdr.robot
index daa2392cdc..700b26ab61 100644
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-48vh-24vm1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-48vh-24vm1t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
@@ -78,9 +79,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-8vh-4vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-8vh-4vm1t-vppip4-ndrpdr.robot
index 67026779dd..078f2761c3 100644
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-8vh-4vm1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-8vh-4vm1t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
@@ -78,9 +79,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-8vh-4vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-8vh-4vm2t-vppip4-ndrpdr.robot
index 7d83a4f6f0..ee698cd8b3 100644
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-8vh-4vm2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-8vh-4vm2t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -78,9 +79,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-12vh-6vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-12vh-6vm1t-vppip4-ndrpdr.robot
index 329ded90df..43e2ada6e2 100644
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-12vh-6vm1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-12vh-6vm1t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
@@ -78,9 +79,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-12vh-6vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-12vh-6vm2t-vppip4-ndrpdr.robot
index c127f53846..182a706e3b 100644
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-12vh-6vm2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-12vh-6vm2t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -78,9 +79,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-24vh-12vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-24vh-12vm1t-vppip4-ndrpdr.robot
index 327b4c9523..2a505914db 100644
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-24vh-12vm1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-24vh-12vm1t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
@@ -78,9 +79,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-24vh-12vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-24vh-12vm2t-vppip4-ndrpdr.robot
index f0f6cc4288..7c0680b6b8 100644
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-24vh-12vm2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-24vh-12vm2t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -78,9 +79,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-48vh-24vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-48vh-24vm1t-vppip4-ndrpdr.robot
index da60f130a1..5d613cd7e0 100644
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-48vh-24vm1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-48vh-24vm1t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
@@ -78,9 +79,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-8ch-16vh-8vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-8ch-16vh-8vm1t-vppip4-ndrpdr.robot
index d6fdf9f32b..07828d6633 100644
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-8ch-16vh-8vm1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-8ch-16vh-8vm1t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
@@ -78,9 +79,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-8ch-16vh-8vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-8ch-16vh-8vm2t-vppip4-ndrpdr.robot
index 2e61add2c9..95c1a789aa 100644
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-8ch-16vh-8vm2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-8ch-16vh-8vm2t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -78,9 +79,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-8ch-32vh-16vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-8ch-32vh-16vm1t-vppip4-ndrpdr.robot
index 37cc520162..ea579fcf1c 100644
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-8ch-32vh-16vm1t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-8ch-32vh-16vm1t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
@@ -78,9 +79,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-8ch-32vh-16vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-8ch-32vh-16vm2t-vppip4-ndrpdr.robot
index 5a875cdf69..00ea7d0709 100644
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-8ch-32vh-16vm2t-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-8ch-32vh-16vm2t-vppip4-ndrpdr.robot
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -78,9 +79,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm1t-testpmd-reconf.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm1t-testpmd-reconf.robot
index c8a4b59ca3..e345aa2977 100644
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm1t-testpmd-reconf.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm1t-testpmd-reconf.robot
@@ -51,9 +51,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${54}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
@@ -82,9 +83,9 @@
| | Set Test Variable | \${frame_size}
| | ...
| | ${nf_total_chains}= | Evaluate | ${nf_chains} + ${nf_added_chains}
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm2t-testpmd-reconf.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm2t-testpmd-reconf.robot
index 344c5ffe67..d9d333ad10 100644
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm2t-testpmd-reconf.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm2t-testpmd-reconf.robot
@@ -51,9 +51,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${54}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -82,9 +83,9 @@
| | Set Test Variable | \${frame_size}
| | ...
| | ${nf_total_chains}= | Evaluate | ${nf_chains} + ${nf_added_chains}
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-10ch-20vh-10vm1t-testpmd-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-10ch-20vh-10vm1t-testpmd-ndrpdr.robot
index ae6e1e3ab3..a183aba4fd 100644
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-10ch-20vh-10vm1t-testpmd-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-10ch-20vh-10vm1t-testpmd-ndrpdr.robot
@@ -53,9 +53,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${54}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
@@ -82,9 +83,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-10ch-20vh-10vm2t-testpmd-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-10ch-20vh-10vm2t-testpmd-ndrpdr.robot
index 795476bd73..adb8ddf077 100644
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-10ch-20vh-10vm2t-testpmd-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-10ch-20vh-10vm2t-testpmd-ndrpdr.robot
@@ -53,9 +53,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${54}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -82,9 +83,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-1ch-1ach-2vh-1vm1t-testpmd-reconf.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-1ch-1ach-2vh-1vm1t-testpmd-reconf.robot
index a5378d0773..0f23a6ad24 100644
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-1ch-1ach-2vh-1vm1t-testpmd-reconf.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-1ch-1ach-2vh-1vm1t-testpmd-reconf.robot
@@ -51,9 +51,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${54}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
@@ -82,9 +83,9 @@
| | Set Test Variable | \${frame_size}
| | ...
| | ${nf_total_chains}= | Evaluate | ${nf_chains} + ${nf_added_chains}
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-1ch-1ach-2vh-1vm2t-testpmd-reconf.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-1ch-1ach-2vh-1vm2t-testpmd-reconf.robot
index 4cff50ddd6..4a9006ea1c 100644
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-1ch-1ach-2vh-1vm2t-testpmd-reconf.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-1ch-1ach-2vh-1vm2t-testpmd-reconf.robot
@@ -51,9 +51,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${54}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -82,9 +83,9 @@
| | Set Test Variable | \${frame_size}
| | ...
| | ${nf_total_chains}= | Evaluate | ${nf_chains} + ${nf_added_chains}
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-1ch-2vh-1vm1t-testpmd-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-1ch-2vh-1vm1t-testpmd-ndrpdr.robot
index e2fa61d897..392cc0459c 100644
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-1ch-2vh-1vm1t-testpmd-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-1ch-2vh-1vm1t-testpmd-ndrpdr.robot
@@ -53,9 +53,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${54}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
@@ -82,9 +83,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-1ch-2vh-1vm2t-testpmd-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-1ch-2vh-1vm2t-testpmd-ndrpdr.robot
index 1ddae3f7f0..fb89050968 100644
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-1ch-2vh-1vm2t-testpmd-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-1ch-2vh-1vm2t-testpmd-ndrpdr.robot
@@ -53,9 +53,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${54}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -82,9 +83,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-2ch-1ach-4vh-2vm1t-testpmd-reconf.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-2ch-1ach-4vh-2vm1t-testpmd-reconf.robot
index 652be6b279..14ec29bfff 100644
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-2ch-1ach-4vh-2vm1t-testpmd-reconf.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-2ch-1ach-4vh-2vm1t-testpmd-reconf.robot
@@ -51,9 +51,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${54}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
@@ -82,9 +83,9 @@
| | Set Test Variable | \${frame_size}
| | ...
| | ${nf_total_chains}= | Evaluate | ${nf_chains} + ${nf_added_chains}
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-2ch-1ach-4vh-2vm2t-testpmd-reconf.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-2ch-1ach-4vh-2vm2t-testpmd-reconf.robot
index 6dc246a6d4..a89212e659 100644
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-2ch-1ach-4vh-2vm2t-testpmd-reconf.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-2ch-1ach-4vh-2vm2t-testpmd-reconf.robot
@@ -51,9 +51,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${54}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -82,9 +83,9 @@
| | Set Test Variable | \${frame_size}
| | ...
| | ${nf_total_chains}= | Evaluate | ${nf_chains} + ${nf_added_chains}
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-2ch-4vh-2vm1t-testpmd-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-2ch-4vh-2vm1t-testpmd-ndrpdr.robot
index 249aa96ddd..295be2779e 100644
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-2ch-4vh-2vm1t-testpmd-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-2ch-4vh-2vm1t-testpmd-ndrpdr.robot
@@ -53,9 +53,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${54}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
@@ -82,9 +83,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-2ch-4vh-2vm2t-testpmd-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-2ch-4vh-2vm2t-testpmd-ndrpdr.robot
index e9bbd125f8..7061a39b56 100644
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-2ch-4vh-2vm2t-testpmd-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-2ch-4vh-2vm2t-testpmd-ndrpdr.robot
@@ -53,9 +53,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${54}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -82,9 +83,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-4ch-1ach-8vh-4vm1t-testpmd-reconf.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-4ch-1ach-8vh-4vm1t-testpmd-reconf.robot
index 58583b15ab..4b60698cb8 100644
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-4ch-1ach-8vh-4vm1t-testpmd-reconf.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-4ch-1ach-8vh-4vm1t-testpmd-reconf.robot
@@ -51,9 +51,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${54}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
@@ -82,9 +83,9 @@
| | Set Test Variable | \${frame_size}
| | ...
| | ${nf_total_chains}= | Evaluate | ${nf_chains} + ${nf_added_chains}
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-4ch-1ach-8vh-4vm2t-testpmd-reconf.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-4ch-1ach-8vh-4vm2t-testpmd-reconf.robot
index afd983302e..e6e446b44c 100644
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-4ch-1ach-8vh-4vm2t-testpmd-reconf.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-4ch-1ach-8vh-4vm2t-testpmd-reconf.robot
@@ -51,9 +51,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${54}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -82,9 +83,9 @@
| | Set Test Variable | \${frame_size}
| | ...
| | ${nf_total_chains}= | Evaluate | ${nf_chains} + ${nf_added_chains}
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-4ch-8vh-4vm1t-testpmd-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-4ch-8vh-4vm1t-testpmd-ndrpdr.robot
index 2ed6d8ac75..a302ee4bb5 100644
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-4ch-8vh-4vm1t-testpmd-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-4ch-8vh-4vm1t-testpmd-ndrpdr.robot
@@ -53,9 +53,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${54}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
@@ -82,9 +83,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-4ch-8vh-4vm2t-testpmd-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-4ch-8vh-4vm2t-testpmd-ndrpdr.robot
index a6f7805f98..28d7417bff 100644
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-4ch-8vh-4vm2t-testpmd-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-4ch-8vh-4vm2t-testpmd-ndrpdr.robot
@@ -53,9 +53,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${54}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -82,9 +83,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-6ch-12vh-6vm1t-testpmd-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-6ch-12vh-6vm1t-testpmd-ndrpdr.robot
index dd67361faf..34ec3629a7 100644
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-6ch-12vh-6vm1t-testpmd-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-6ch-12vh-6vm1t-testpmd-ndrpdr.robot
@@ -53,9 +53,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${54}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
@@ -82,9 +83,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-6ch-12vh-6vm2t-testpmd-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-6ch-12vh-6vm2t-testpmd-ndrpdr.robot
index d14983adfc..79398f2342 100644
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-6ch-12vh-6vm2t-testpmd-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-6ch-12vh-6vm2t-testpmd-ndrpdr.robot
@@ -53,9 +53,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${54}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -82,9 +83,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-6ch-1ach-12vh-6vm1t-testpmd-reconf.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-6ch-1ach-12vh-6vm1t-testpmd-reconf.robot
index 69727720f7..9156afaf8f 100644
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-6ch-1ach-12vh-6vm1t-testpmd-reconf.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-6ch-1ach-12vh-6vm1t-testpmd-reconf.robot
@@ -51,9 +51,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${54}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
@@ -82,9 +83,9 @@
| | Set Test Variable | \${frame_size}
| | ...
| | ${nf_total_chains}= | Evaluate | ${nf_chains} + ${nf_added_chains}
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-6ch-1ach-12vh-6vm2t-testpmd-reconf.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-6ch-1ach-12vh-6vm2t-testpmd-reconf.robot
index 85e15f54d3..e4191eccac 100644
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-6ch-1ach-12vh-6vm2t-testpmd-reconf.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-6ch-1ach-12vh-6vm2t-testpmd-reconf.robot
@@ -51,9 +51,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${54}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -82,9 +83,9 @@
| | Set Test Variable | \${frame_size}
| | ...
| | ${nf_total_chains}= | Evaluate | ${nf_chains} + ${nf_added_chains}
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-8ch-16vh-8vm1t-testpmd-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-8ch-16vh-8vm1t-testpmd-ndrpdr.robot
index 73fc61a101..56a700fe2e 100644
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-8ch-16vh-8vm1t-testpmd-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-8ch-16vh-8vm1t-testpmd-ndrpdr.robot
@@ -53,9 +53,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${54}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
@@ -82,9 +83,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-8ch-16vh-8vm2t-testpmd-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-8ch-16vh-8vm2t-testpmd-ndrpdr.robot
index e9417b1670..96341c45db 100644
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-8ch-16vh-8vm2t-testpmd-ndrpdr.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-8ch-16vh-8vm2t-testpmd-ndrpdr.robot
@@ -53,9 +53,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${54}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -82,9 +83,9 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-8ch-1ach-16vh-8vm1t-testpmd-reconf.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-8ch-1ach-16vh-8vm1t-testpmd-reconf.robot
index 3ee26c099d..196bf2addf 100644
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-8ch-1ach-16vh-8vm1t-testpmd-reconf.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-8ch-1ach-16vh-8vm1t-testpmd-reconf.robot
@@ -51,9 +51,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${54}
| ${nf_dtcr}= | ${2}
| ${nf_dtc}= | ${0.5}
@@ -82,9 +83,9 @@
| | Set Test Variable | \${frame_size}
| | ...
| | ${nf_total_chains}= | Evaluate | ${nf_chains} + ${nf_added_chains}
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-8ch-1ach-16vh-8vm2t-testpmd-reconf.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-8ch-1ach-16vh-8vm2t-testpmd-reconf.robot
index d5c54cc9ca..88337d2d2d 100644
--- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-8ch-1ach-16vh-8vm2t-testpmd-reconf.robot
+++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-8ch-1ach-16vh-8vm2t-testpmd-reconf.robot
@@ -51,9 +51,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${54}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -82,9 +83,9 @@
| | Set Test Variable | \${frame_size}
| | ...
| | ${nf_total_chains}= | Evaluate | ${nf_chains} + ${nf_added_chains}
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
diff --git a/tests/vpp/perf/srv6/10ge2p1x710-ethip6ip6-ip6base-srv6enc1sid-ndrpdr.robot b/tests/vpp/perf/srv6/10ge2p1x710-ethip6ip6-ip6base-srv6enc1sid-ndrpdr.robot
index 1bedcffd86..d91b9819f4 100644
--- a/tests/vpp/perf/srv6/10ge2p1x710-ethip6ip6-ip6base-srv6enc1sid-ndrpdr.robot
+++ b/tests/vpp/perf/srv6/10ge2p1x710-ethip6ip6-ip6base-srv6enc1sid-ndrpdr.robot
@@ -15,7 +15,7 @@
| Resource | resources/libraries/robot/shared/default.robot
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | IP6FWD | FEATURE | SRv6 | SRv6_1SID
+| ... | NIC_Intel-X710 | ETH | IP6FWD | FEATURE | SRv6 | SRv6_1SID | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -50,10 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
-# outer IPv6 header: 40B
+| ${osi_layer}= | L3
| ${overhead}= | ${40}
# SIDs
| ${dut1_sid1}= | 2002:1::
@@ -94,11 +94,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
-| | When Initialize layer driver | vfio-pci
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv6 forwarding over SRv6 with encapsulation with '1' x SID 'with' decapsulation in 3-node circular topology
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-ndrpdr.robot b/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-ndrpdr.robot
index 50e723e60a..ab6be185bf 100644
--- a/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-ndrpdr.robot
+++ b/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-ndrpdr.robot
@@ -16,6 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | IP6FWD | FEATURE | SRv6 | SRv6_2SID_DECAP
+| ... | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -50,10 +51,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
-# outer IPv6 header + SRH with 2 SIDs: 40+40B
+| ${osi_layer}= | L3
| ${overhead}= | ${80}
# SIDs
| ${dut1_sid1}= | 2002:1::
@@ -97,11 +98,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
-| | When Initialize layer driver | vfio-pci
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv6 forwarding over SRv6 with encapsulation with '2' x SID 'with' decapsulation in 3-node circular topology
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-ndrpdr.robot b/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-ndrpdr.robot
index dd46569cb6..655a418caa 100644
--- a/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-ndrpdr.robot
+++ b/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-ndrpdr.robot
@@ -16,6 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | IP6FWD | FEATURE | SRv6 | SRv6_2SID_NODECAP
+| ... | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -50,10 +51,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
-# outer IPv6 header + SRH with 2 SIDs: 40+40B
+| ${osi_layer}= | L3
| ${overhead}= | ${80}
# SIDs
| ${dut1_sid1}= | 2002:1::
@@ -97,11 +98,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
-| | When Initialize layer driver | vfio-pci
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv6 forwarding over SRv6 with encapsulation with '2' x SID 'without' decapsulation in 3-node circular topology
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-dyn-ndrpdr.robot b/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-dyn-ndrpdr.robot
index 72d6fe91d2..43fd06bc2f 100644
--- a/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-dyn-ndrpdr.robot
+++ b/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-dyn-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | SRv6 | IP6FWD | FEATURE | SRv6_PROXY
-| ... | SRv6_PROXY_DYN | MEMIF | LXC
+| ... | SRv6_PROXY_DYN | MEMIF | LXC | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -51,10 +51,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so | srv6ad_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
-# outer IPv6 header + SRH with 3 SIDs: 40+(8+3*16)B
+| ${osi_layer}= | L3
| ${overhead}= | ${96}
# SIDs
| ${dut1_sid1}= | 2002:1::
@@ -110,11 +110,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
-| | When Initialize layer driver | vfio-pci
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Start containers for test | nf_chains=${1} | nf_nodes=${1}
| | And Initialize IPv6 forwarding over SRv6 with endpoint to SR-unaware Service Function via 'dynamic_proxy' behaviour in 3-node circular topology
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdr.robot b/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdr.robot
index 76338a552d..b0f27432b4 100644
--- a/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdr.robot
+++ b/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | SRv6 | IP6FWD | FEATURE | SRv6_PROXY
-| ... | SRv6_PROXY_MASQ | MEMIF | LXC
+| ... | SRv6_PROXY_MASQ | MEMIF | LXC | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -51,10 +51,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so | srv6am_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
-# outer IPv6 header + SRH with 3 SIDs: 40+(8+3*16)B
+| ${osi_layer}= | L3
| ${overhead}= | ${96}
# SIDs
| ${dut1_sid1}= | 2002:1::
@@ -110,11 +110,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
-| | When Initialize layer driver | vfio-pci
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Start containers for test | nf_chains=${1} | nf_nodes=${1}
| | And Initialize IPv6 forwarding over SRv6 with endpoint to SR-unaware Service Function via 'masquerading' behaviour in 3-node circular topology
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-stat-ndrpdr.robot b/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-stat-ndrpdr.robot
index 2227b4c9b9..6216f4ec93 100644
--- a/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-stat-ndrpdr.robot
+++ b/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-stat-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | SRv6 | IP6FWD | FEATURE | SRv6_PROXY
-| ... | SRv6_PROXY_STAT | MEMIF | LXC
+| ... | SRv6_PROXY_STAT | MEMIF | LXC | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -51,10 +51,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so | srv6as_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
-# outer IPv6 header + SRH with 3 SIDs: 40+(8+3*16)B
+| ${osi_layer}= | L3
| ${overhead}= | ${96}
# SIDs
| ${dut1_sid1}= | 2002:1::
@@ -110,11 +110,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
-| | When Initialize layer driver | vfio-pci
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Start containers for test | nf_chains=${1} | nf_nodes=${1}
| | And Initialize IPv6 forwarding over SRv6 with endpoint to SR-unaware Service Function via 'static_proxy' behaviour in 3-node circular topology
| | Then Find NDR and PDR intervals using optimized search
diff --git a/tests/vpp/perf/tcp/2n1l-10ge2p1x710-eth-ip4tcphttp-wrk8u8c50con-cps.robot b/tests/vpp/perf/tcp/2n1l-10ge2p1x710-eth-ip4tcphttp-wrk8u8c50con-cps.robot
index af480b6efd..bc626c0f54 100644
--- a/tests/vpp/perf/tcp/2n1l-10ge2p1x710-eth-ip4tcphttp-wrk8u8c50con-cps.robot
+++ b/tests/vpp/perf/tcp/2n1l-10ge2p1x710-eth-ip4tcphttp-wrk8u8c50con-cps.robot
@@ -19,7 +19,7 @@
| Resource | resources/libraries/robot/tcp/tcp_setup.robot
| ...
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV
-| ... | HTTP | TCP | TCP_CPS | NIC_Intel-X710
+| ... | HTTP | TCP | TCP_CPS | NIC_Intel-X710 | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | wrk
| Suite Teardown | Tear down suite
@@ -40,6 +40,7 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | http_static_plugin.so
| ... | hs_apps_plugin.so
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
| ${traffic_profile}= | wrk-sf-2n-ethip4tcphttp-8u8c50con-cps
@@ -49,8 +50,9 @@
| Local template
| | [Arguments] | ${phy_cores} | ${rxq}=${None}
| | ...
-| | Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | Add PCI devices to all DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | :FOR | ${dut} | IN | @{duts}
| | | Import Library | resources.libraries.python.VppConfigGenerator
| | | ... | WITH NAME | ${dut}
@@ -66,8 +68,9 @@
| | | Run keyword | ${dut}.Add session v4 halfopen table memory | 3g
| | | Run keyword | ${dut}.Add session local endpoints table buckets | 2500000
| | | Run keyword | ${dut}.Add session local endpoints table memory | 3g
-| | Apply startup configuration on all VPP DUTs
-| | When Initialize layer driver | vfio-pci
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Set up HTTP server with parameters on the VPP node
| | ... | ${http_static_plugin} | 31000 | 64 | 4000m
| | Then Measure connections per second | ${traffic_profile}
diff --git a/tests/vpp/perf/tcp/2n1l-10ge2p1x710-eth-ip4tcphttp-wrk8u8c50con-rps.robot b/tests/vpp/perf/tcp/2n1l-10ge2p1x710-eth-ip4tcphttp-wrk8u8c50con-rps.robot
index 2998535804..1fc7077093 100644
--- a/tests/vpp/perf/tcp/2n1l-10ge2p1x710-eth-ip4tcphttp-wrk8u8c50con-rps.robot
+++ b/tests/vpp/perf/tcp/2n1l-10ge2p1x710-eth-ip4tcphttp-wrk8u8c50con-rps.robot
@@ -19,7 +19,7 @@
| Resource | resources/libraries/robot/tcp/tcp_setup.robot
| ...
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV
-| ... | HTTP | TCP | TCP_RPS | NIC_Intel-X710
+| ... | HTTP | TCP | TCP_RPS | NIC_Intel-X710 | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | wrk
| Suite Teardown | Tear down suite
@@ -40,6 +40,7 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | http_static_plugin.so
| ... | hs_apps_plugin.so
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
| ${traffic_profile}= | wrk-sf-2n-ethip4tcphttp-8u8c50con-rps
@@ -49,8 +50,9 @@
| Local template
| | [Arguments] | ${phy_cores} | ${rxq}=${None}
| | ...
-| | Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | Add PCI devices to all DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | :FOR | ${dut} | IN | @{duts}
| | | Import Library | resources.libraries.python.VppConfigGenerator
| | | ... | WITH NAME | ${dut}
@@ -66,8 +68,9 @@
| | | Run keyword | ${dut}.Add session v4 halfopen table memory | 3g
| | | Run keyword | ${dut}.Add session local endpoints table buckets | 2500000
| | | Run keyword | ${dut}.Add session local endpoints table memory | 3g
-| | Apply startup configuration on all VPP DUTs
-| | When Initialize layer driver | vfio-pci
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Set up HTTP server with parameters on the VPP node
| | ... | ${http_static_plugin} | 500000 | 4 | 4000m
| | Then Measure requests per second | ${traffic_profile}
diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot
index 9da3a8787d..98717be886 100644
--- a/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot
+++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot
@@ -17,7 +17,7 @@
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | DOT1Q | L2BDMACLRN | BASE | VHOST | 1VM
| ... | VHOST_1024 | LBOND | LBOND_VPP | LBOND_MODE_LACP | LBOND_LB_L34
-| ... | LBOND_1L | VM_TESTPMD
+| ... | LBOND_1L | VM_TESTPMD | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -53,9 +53,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | lacp_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${4}
| ${subid}= | 10
| ${tag_rewrite}= | pop-1
@@ -88,12 +89,13 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Add VLAN Strip Offload switch off between DUTs in 3-node single link topology
-| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
-| | When Initialize layer driver | vfio-pci
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize L2 bridge domains with Vhost-User and VLAN with VPP link bonding in a 3-node circular topology
| | ... | ${bd_id1} | ${bd_id2} | ${subid}
| | ... | ${tag_rewrite} | ${bond_mode} | ${lb_mode}
diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot
index c308a54535..aca6ad6d98 100644
--- a/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot
+++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot
@@ -17,7 +17,7 @@
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | DOT1Q | L2BDMACLRN | BASE | VHOST | 1VM
| ... | VHOST_1024 | LBOND | LBOND_VPP | LBOND_MODE_LACP | LBOND_LB_L34
-| ... | LBOND_1L | NF_VPPL2XC
+| ... | LBOND_1L | NF_VPPL2XC | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -53,9 +53,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | lacp_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${4}
| ${subid}= | 10
| ${tag_rewrite}= | pop-1
@@ -88,12 +89,13 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Add VLAN Strip Offload switch off between DUTs in 3-node single link topology
-| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
-| | When Initialize layer driver | vfio-pci
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize L2 bridge domains with Vhost-User and VLAN with VPP link bonding in a 3-node circular topology
| | ... | ${bd_id1} | ${bd_id2} | ${subid}
| | ... | ${tag_rewrite} | ${bond_mode} | ${lb_mode}
diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot
index a9c723b979..9ce108415f 100644
--- a/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot
+++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot
@@ -17,7 +17,7 @@
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | DOT1Q | L2XCFWD | BASE | VHOST | 1VM
| ... | VHOST_1024 | LBOND | LBOND_VPP | LBOND_MODE_LACP | LBOND_LB_L34
-| ... | LBOND_1L | NF_TESTPMD
+| ... | LBOND_1L | NF_TESTPMD | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -53,9 +53,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | lacp_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${4}
| ${subid}= | 10
| ${tag_rewrite}= | pop-1
@@ -86,12 +87,13 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Add VLAN Strip Offload switch off between DUTs in 3-node single link topology
-| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
-| | When Initialize layer driver | vfio-pci
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize L2 xconnect with Vhost-User and VLAN with VPP link bonding in 3-node circular topology
| | ... | ${subid} | ${tag_rewrite} | ${bond_mode} | ${lb_mode}
| | And Configure chains of NFs connected via vhost-user
diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot
index 6c753cbf1c..c57d10c851 100644
--- a/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot
+++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot
@@ -17,7 +17,7 @@
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | DOT1Q | L2XCFWD | BASE | VHOST | 1VM
| ... | VHOST_1024 | LBOND | LBOND_VPP | LBOND_MODE_LACP | LBOND_LB_L34
-| ... | LBOND_1L | NF_VPPL2XC
+| ... | LBOND_1L | NF_VPPL2XC | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -53,9 +53,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | lacp_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${4}
| ${subid}= | 10
| ${tag_rewrite}= | pop-1
@@ -86,12 +87,13 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Add VLAN Strip Offload switch off between DUTs in 3-node single link topology
-| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
-| | When Initialize layer driver | vfio-pci
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize L2 xconnect with Vhost-User and VLAN with VPP link bonding in 3-node circular topology
| | ... | ${subid} | ${tag_rewrite} | ${bond_mode} | ${lb_mode}
| | And Configure chains of NFs connected via vhost-user
diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-2lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-2lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot
index a40829235b..15915c1db9 100644
--- a/tests/vpp/perf/vm_vhost/10ge2p1x710-2lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot
+++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-2lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot
@@ -17,7 +17,7 @@
| Force Tags | 3_NODE_DOUBLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | DOT1Q | L2BDMACLRN | BASE | VHOST | 1VM
| ... | VHOST_1024 | LBOND | LBOND_VPP | LBOND_MODE_LACP | LBOND_LB_L34
-| ... | LBOND_2L | VM_TESTPMD
+| ... | LBOND_2L | VM_TESTPMD | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite double link | performance
| Suite Teardown | Tear down suite | performance
@@ -54,9 +54,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | lacp_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${4}
| ${subid}= | 10
| ${tag_rewrite}= | pop-1
@@ -89,12 +90,13 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Add VLAN Strip Offload switch off between DUTs in 3-node double link topology
-| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
-| | When Initialize layer driver | vfio-pci
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize L2 bridge domains with Vhost-User and VLAN with VPP link bonding in a 3-node circular topology
| | ... | ${bd_id1} | ${bd_id2} | ${subid}
| | ... | ${tag_rewrite} | ${bond_mode} | ${lb_mode}
diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-2lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-2lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot
index 5eca71c9df..8d3b48ea0c 100644
--- a/tests/vpp/perf/vm_vhost/10ge2p1x710-2lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot
+++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-2lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot
@@ -17,7 +17,7 @@
| Force Tags | 3_NODE_DOUBLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | DOT1Q | L2BDMACLRN | BASE | VHOST | 1VM
| ... | VHOST_1024 | LBOND | LBOND_VPP | LBOND_MODE_LACP | LBOND_LB_L34
-| ... | LBOND_2L | NF_VPPL2XC
+| ... | LBOND_2L | NF_VPPL2XC | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite double link | performance
| Suite Teardown | Tear down suite | performance
@@ -54,9 +54,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | lacp_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${4}
| ${subid}= | 10
| ${tag_rewrite}= | pop-1
@@ -89,12 +90,13 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Add VLAN Strip Offload switch off between DUTs in 3-node double link topology
-| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
-| | When Initialize layer driver | vfio-pci
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize L2 bridge domains with Vhost-User and VLAN with VPP link bonding in a 3-node circular topology
| | ... | ${bd_id1} | ${bd_id2} | ${subid}
| | ... | ${tag_rewrite} | ${bond_mode} | ${lb_mode}
diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-2lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-2lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot
index 7cf79c904c..c5d8e65fa0 100644
--- a/tests/vpp/perf/vm_vhost/10ge2p1x710-2lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot
+++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-2lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot
@@ -17,7 +17,7 @@
| Force Tags | 3_NODE_DOUBLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | DOT1Q | L2XCFWD | BASE | VHOST | 1VM
| ... | VHOST_1024 | LBOND | LBOND_VPP | LBOND_MODE_LACP | LBOND_LB_L34
-| ... | LBOND_2L | NF_TESTPMD
+| ... | LBOND_2L | NF_TESTPMD | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite double link | performance
| Suite Teardown | Tear down suite | performance
@@ -54,9 +54,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | lacp_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${4}
| ${subid}= | 10
| ${tag_rewrite}= | pop-1
@@ -87,12 +88,13 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Add VLAN Strip Offload switch off between DUTs in 3-node double link topology
-| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
-| | When Initialize layer driver | vfio-pci
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize L2 xconnect with Vhost-User and VLAN with VPP link bonding in 3-node circular topology
| | ... | ${subid} | ${tag_rewrite} | ${bond_mode} | ${lb_mode}
| | And Configure chains of NFs connected via vhost-user
diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-2lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-2lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot
index 2084d8f1da..3ec3d9c075 100644
--- a/tests/vpp/perf/vm_vhost/10ge2p1x710-2lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot
+++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-2lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot
@@ -17,7 +17,7 @@
| Force Tags | 3_NODE_DOUBLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | DOT1Q | L2XCFWD | BASE | VHOST | 1VM
| ... | VHOST_1024 | LBOND | LBOND_VPP | LBOND_MODE_LACP | LBOND_LB_L34
-| ... | LBOND_2L | NF_VPPL2XC
+| ... | LBOND_2L | NF_VPPL2XC | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite double link | performance
| Suite Teardown | Tear down suite | performance
@@ -54,9 +54,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | lacp_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${4}
| ${subid}= | 10
| ${tag_rewrite}= | pop-1
@@ -87,12 +88,13 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Add VLAN Strip Offload switch off between DUTs in 3-node double link topology
-| | And Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
-| | When Initialize layer driver | vfio-pci
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize L2 xconnect with Vhost-User and VLAN with VPP link bonding in 3-node circular topology
| | ... | ${subid} | ${tag_rewrite} | ${bond_mode} | ${lb_mode}
| | And Configure chains of NFs connected via vhost-user
diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot
index bdb0e17a42..28c2a06c04 100644
--- a/tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot
+++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | DOT1Q | L2BDMACLRN | BASE | VHOST | 1VM
-| ... | VHOST_1024 | NF_TESTPMD
+| ... | VHOST_1024 | NF_TESTPMD | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -52,9 +52,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${4}
| ${subid}= | 10
| ${tag_rewrite}= | pop-1
@@ -84,11 +85,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
-| | When Initialize layer driver | vfio-pci
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize L2 bridge domains with Vhost-User and VLAN in circular topology
| | ... | ${bd_id1} | ${bd_id2} | ${subid} | ${tag_rewrite}
| | And Configure chains of NFs connected via vhost-user
diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot
index 4751d14163..8dfe92171f 100644
--- a/tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot
+++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | DOT1Q | L2BDMACLRN | BASE | VHOST | 1VM
-| ... | VHOST_1024 | NF_VPPL2XC
+| ... | VHOST_1024 | NF_VPPL2XC | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -52,9 +52,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${4}
| ${subid}= | 10
| ${tag_rewrite}= | pop-1
@@ -84,11 +85,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
-| | When Initialize layer driver | vfio-pci
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize L2 bridge domains with Vhost-User and VLAN in circular topology
| | ... | ${bd_id1} | ${bd_id2} | ${subid} | ${tag_rewrite}
| | And Configure chains of NFs connected via vhost-user
diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot
index 3897e2228f..1f723fe38d 100644
--- a/tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot
+++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | DOT1Q | L2XCFWD | BASE | VHOST | 1VM | VHOST_1024
-| ... | NF_TESTPMD
+| ... | NF_TESTPMD | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${4}
| ${subid}= | 10
| ${tag_rewrite}= | pop-1
@@ -80,11 +81,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
-| | When Initialize layer driver | vfio-pci
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize L2 xconnect with Vhost-User and VLAN in 3-node circular topology
| | ... | ${subid} | ${tag_rewrite}
| | And Configure chains of NFs connected via vhost-user
diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot
index 8511069d6b..7e9af95798 100644
--- a/tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot
+++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | DOT1Q | L2XCFWD | BASE | VHOST | 1VM | VHOST_1024
-| ... | NF_VPPL2XC
+| ... | NF_VPPL2XC | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${4}
| ${subid}= | 10
| ${tag_rewrite}= | pop-1
@@ -80,11 +81,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
-| | When Initialize layer driver | vfio-pci
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize L2 xconnect with Vhost-User and VLAN in 3-node circular topology
| | ... | ${subid} | ${tag_rewrite}
| | And Configure chains of NFs connected via vhost-user
diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot
index ee1fe539c4..ef19a8253b 100644
--- a/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot
+++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | 1VM | VHOST_1024
-| ... | NF_TESTPMD
+| ... | NF_TESTPMD | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -78,11 +79,11 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
-| | When Initialize layer driver | vfio-pci
+| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
| | ... | count=${nf_chains}
| | And Initialize L2 bridge domains for multiple chains with Vhost-User
diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot
index 0a88172c48..d6fd922dd3 100644
--- a/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot
+++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | 1VM | VHOST_1024
-| ... | NF_VPPL2XC
+| ... | NF_VPPL2XC | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -78,11 +79,11 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
-| | When Initialize layer driver | vfio-pci
+| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
| | ... | count=${nf_chains}
| | And Initialize L2 bridge domains for multiple chains with Vhost-User
diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot
index a167933224..226231e6c1 100644
--- a/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot
+++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | L2XCFWD | BASE | VHOST | 1VM | VHOST_1024
-| ... | NF_TESTPMD
+| ... | NF_TESTPMD | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -49,9 +49,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -77,11 +78,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
-| | When Initialize layer driver | vfio-pci
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize L2 xconnect with Vhost-User | nf_nodes=${nf_nodes}
| | And Configure chains of NFs connected via vhost-user
| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | jumbo=${jumbo}
diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot
index 4a06f36e96..0f93baf698 100644
--- a/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot
+++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | L2XCFWD | BASE | VHOST | 1VM | VHOST_1024
-| ... | NF_VPPL2XC
+| ... | NF_VPPL2XC | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -49,9 +49,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -77,11 +78,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
-| | When Initialize layer driver | vfio-pci
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize L2 xconnect with Vhost-User | nf_nodes=${nf_nodes}
| | And Configure chains of NFs connected via vhost-user
| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | jumbo=${jumbo}
diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4-ip4base-eth-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4-ip4base-eth-2vhostvr1024-1vm-ndrpdr.robot
index f12fe17547..3ee2b60ffb 100644
--- a/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4-ip4base-eth-2vhostvr1024-1vm-ndrpdr.robot
+++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4-ip4base-eth-2vhostvr1024-1vm-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | IP4FWD | BASE | VHOST | 1VM | VHOST_1024
-| ... | NF_TESTPMD
+| ... | NF_TESTPMD | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -49,9 +49,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -77,11 +78,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
-| | When Initialize layer driver | vfio-pci
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv4 forwarding with vhost in 3-node circular topology
| | ... | nf_nodes=${nf_nodes} | testpmd_mac=${TRUE}
| | And Configure chains of NFs connected via vhost-user
diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4-ip4base-eth-2vhostvr1024-1vm-vppip4-ndrpdr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4-ip4base-eth-2vhostvr1024-1vm-vppip4-ndrpdr.robot
index 20f2beeb65..6d2ea070bf 100644
--- a/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4-ip4base-eth-2vhostvr1024-1vm-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4-ip4base-eth-2vhostvr1024-1vm-vppip4-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | IP4FWD | BASE | VHOST | 1VM | VHOST_1024
-| ... | NF_VPPIP4
+| ... | NF_VPPIP4 | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -49,9 +49,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -77,11 +78,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
-| | When Initialize layer driver | vfio-pci
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv4 forwarding with vhost in 3-node circular topology
| | ... | nf_nodes=${nf_nodes}
| | And Configure chains of NFs connected via vhost-user
diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot
index e5f7bf242c..55552ceca2 100644
--- a/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot
+++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | L2BDMACLRN | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY
-| ... | VHOST | 1VM | VHOST_1024 | NF_TESTPMD
+| ... | VHOST | 1VM | VHOST_1024 | NF_TESTPMD | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -51,9 +51,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${50}
| ${bd_id1}= | 1
| ${bd_id2}= | 2
@@ -81,11 +82,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
-| | When Initialize layer driver | vfio-pci
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize L2 bridge domains with Vhost-User and VXLANoIPv4 in 3-node circular topology
| | ... | ${bd_id1} | ${bd_id2}
| | And Configure chains of NFs connected via vhost-user
diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot
index e70db2e210..ab8f42e43e 100644
--- a/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot
+++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | L2BDMACLRN | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY
-| ... | VHOST | 1VM | VHOST_1024 | NF_VPPL2XC
+| ... | VHOST | 1VM | VHOST_1024 | NF_VPPL2XC | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -51,9 +51,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${50}
| ${bd_id1}= | 1
| ${bd_id2}= | 2
@@ -81,11 +82,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
-| | When Initialize layer driver | vfio-pci
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize L2 bridge domains with Vhost-User and VXLANoIPv4 in 3-node circular topology
| | ... | ${bd_id1} | ${bd_id2}
| | And Configure chains of NFs connected via vhost-user
diff --git a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot
index c7d5410913..d44ae9c909 100644
--- a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot
+++ b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | DOT1Q | L2BDMACLRN | BASE | VHOST | 1VM
-| ... | VHOST_1024 | NF_TESTPMD
+| ... | VHOST_1024 | NF_TESTPMD | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -51,9 +51,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${4}
| ${subid}= | 10
| ${tag_rewrite}= | pop-1
@@ -83,11 +84,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
-| | When Initialize layer driver | vfio-pci
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize L2 bridge domains with Vhost-User and VLAN in circular topology
| | ... | ${bd_id1} | ${bd_id2} | ${subid} | ${tag_rewrite}
| | And Configure chains of NFs connected via vhost-user
diff --git a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot
index 2a5c08297c..6a8d3466a8 100644
--- a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot
+++ b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | DOT1Q | L2BDMACLRN | BASE | VHOST | 1VM
-| ... | VHOST_1024 | NF_VPPL2XC
+| ... | VHOST_1024 | NF_VPPL2XC | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -51,9 +51,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${4}
| ${subid}= | 10
| ${tag_rewrite}= | pop-1
@@ -83,11 +84,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
-| | When Initialize layer driver | vfio-pci
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize L2 bridge domains with Vhost-User and VLAN in circular topology
| | ... | ${bd_id1} | ${bd_id2} | ${subid} | ${tag_rewrite}
| | And Configure chains of NFs connected via vhost-user
diff --git a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot
index 0b9c4422c7..9bfd07ea33 100644
--- a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot
+++ b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | 1VM | VHOST_1024
-| ... | NF_TESTPMD
+| ... | NF_TESTPMD | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -78,11 +79,11 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
-| | When Initialize layer driver | vfio-pci
+| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
| | ... | count=${nf_chains}
| | And Initialize L2 bridge domains for multiple chains with Vhost-User
diff --git a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot
index 31f29c94dc..45fbfe8233 100644
--- a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot
+++ b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | 1VM | VHOST_1024
-| ... | NF_VPPL2XC
+| ... | NF_VPPL2XC | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -50,9 +50,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -78,11 +79,11 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
-| | When Initialize layer driver | vfio-pci
+| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
| | ... | count=${nf_chains}
| | And Initialize L2 bridge domains for multiple chains with Vhost-User
diff --git a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-eth-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-eth-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot
index 92a05c51ca..559acc2467 100644
--- a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-eth-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot
+++ b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-eth-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | L2XCFWD | BASE | VHOST | 1VM | VHOST_1024
-| ... | NF_TESTPMD
+| ... | NF_TESTPMD | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -49,9 +49,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -77,11 +78,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
-| | When Initialize layer driver | vfio-pci
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize L2 xconnect with Vhost-User | nf_nodes=${nf_nodes}
| | And Configure chains of NFs connected via vhost-user
| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | jumbo=${jumbo}
diff --git a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-eth-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-eth-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot
index 1d9e309dda..4e26a4886b 100644
--- a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-eth-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot
+++ b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-eth-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | L2XCFWD | BASE | VHOST | 1VM | VHOST_1024
-| ... | NF_VPPL2XC
+| ... | NF_VPPL2XC | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -49,9 +49,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -77,11 +78,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
-| | When Initialize layer driver | vfio-pci
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize L2 xconnect with Vhost-User | nf_nodes=${nf_nodes}
| | And Configure chains of NFs connected via vhost-user
| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | jumbo=${jumbo}
diff --git a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-ethip4-ip4base-eth-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-ethip4-ip4base-eth-2vhostvr1024-1vm-ndrpdr.robot
index 1678b17b10..ae1b86ec05 100644
--- a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-ethip4-ip4base-eth-2vhostvr1024-1vm-ndrpdr.robot
+++ b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-ethip4-ip4base-eth-2vhostvr1024-1vm-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | IP4FWD | BASE | VHOST | 1VM | VHOST_1024
-| ... | NF_TESTPMD
+| ... | NF_TESTPMD | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -49,9 +49,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -77,11 +78,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
-| | When Initialize layer driver | vfio-pci
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv4 forwarding with vhost in 2-node circular topology
| | ... | nf_nodes=${nf_nodes} | testpmd_mac=${TRUE}
| | And Configure chains of NFs connected via vhost-user
diff --git a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-ethip4-ip4base-eth-2vhostvr1024-1vm-vppip4-ndrpdr.robot b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-ethip4-ip4base-eth-2vhostvr1024-1vm-vppip4-ndrpdr.robot
index 8e9f63389e..6cb2f016be 100644
--- a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-ethip4-ip4base-eth-2vhostvr1024-1vm-vppip4-ndrpdr.robot
+++ b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-ethip4-ip4base-eth-2vhostvr1024-1vm-vppip4-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | ETH | IP4FWD | BASE | VHOST | 1VM | VHOST_1024
-| ... | NF_VPPIP4
+| ... | NF_VPPIP4 | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -49,9 +49,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -77,11 +78,12 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
-| | When Initialize layer driver | vfio-pci
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize IPv4 forwarding with vhost in 2-node circular topology
| | ... | nf_nodes=${nf_nodes}
| | And Configure chains of NFs connected via vhost-user
diff --git a/tests/vpp/perf/vts/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vts/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr.robot
index 6f3eb7e27f..3b02285b0b 100644
--- a/tests/vpp/perf/vts/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr.robot
+++ b/tests/vpp/perf/vts/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | L2BDMACLRN | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY
-| ... | VHOST | VM | VHOST_1024 | VTS | ACL_PERMIT
+| ... | VHOST | VM | VHOST_1024 | VTS | ACL_PERMIT | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -52,9 +52,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${50}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -85,16 +86,16 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | &{vxlan1} = | Create Dictionary | vni=0 | vtep=172.17.0.2
| | &{vxlan2} = | Create Dictionary | vni=0 | vtep=172.27.0.2
| | @{dut1_vxlans} = | Create List | ${vxlan1}
| | @{dut2_vxlans} = | Create List | ${vxlan2}
-| | When Initialize layer driver | ${nic_driver}
-| | And Set interfaces in path up
| | When Init L2 bridge domains with single DUT with Vhost-User and VXLANoIPv4 in 3-node circular topology
| | ... | 172.16.0.1 | 16 | 172.26.0.1 | 16 | 172.16.0.2 | 172.26.0.2
| | ... | ${dut1_vxlans} | ${dut2_vxlans} | 172.17.0.0 | 16 | 172.27.0.0 | 16
diff --git a/tests/vpp/perf/vts/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vts/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-ndrpdr.robot
index 36528cb713..833c3869f5 100644
--- a/tests/vpp/perf/vts/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-ndrpdr.robot
+++ b/tests/vpp/perf/vts/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | L2BDMACLRN | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY
-| ... | VHOST | VM | VHOST_1024 | VTS | ACL_PERMIT_REFLECT
+| ... | VHOST | VM | VHOST_1024 | VTS | ACL_PERMIT_REFLECT | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -52,9 +52,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${50}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -85,16 +86,16 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | &{vxlan1} = | Create Dictionary | vni=0 | vtep=172.17.0.2
| | &{vxlan2} = | Create Dictionary | vni=0 | vtep=172.27.0.2
| | @{dut1_vxlans} = | Create List | ${vxlan1}
| | @{dut2_vxlans} = | Create List | ${vxlan2}
-| | When Initialize layer driver | ${nic_driver}
-| | And Set interfaces in path up
| | When Init L2 bridge domains with single DUT with Vhost-User and VXLANoIPv4 in 3-node circular topology
| | ... | 172.16.0.1 | 16 | 172.26.0.1 | 16 | 172.16.0.2 | 172.26.0.2
| | ... | ${dut1_vxlans} | ${dut2_vxlans} | 172.17.0.0 | 16 | 172.27.0.0 | 16
diff --git a/tests/vpp/perf/vts/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vts/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-ndrpdr.robot
index ad4c5ca8b8..1c77f93a4c 100644
--- a/tests/vpp/perf/vts/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-ndrpdr.robot
+++ b/tests/vpp/perf/vts/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-ndrpdr.robot
@@ -16,7 +16,7 @@
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | L2BDMACLRN | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY
-| ... | VHOST | VM | VHOST_1024 | VTS
+| ... | VHOST | VM | VHOST_1024 | VTS | DRV_VFIO_PCI
| ...
| Suite Setup | Setup suite single link | performance
| Suite Teardown | Tear down suite | performance
@@ -52,9 +52,10 @@
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L3
| ${overhead}= | ${50}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
@@ -85,16 +86,16 @@
| | ...
| | Set Test Variable | \${frame_size}
| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | &{vxlan1} = | Create Dictionary | vni=0 | vtep=172.17.0.2
| | &{vxlan2} = | Create Dictionary | vni=0 | vtep=172.27.0.2
| | @{dut1_vxlans} = | Create List | ${vxlan1}
| | @{dut2_vxlans} = | Create List | ${vxlan2}
-| | When Initialize layer driver | ${nic_driver}
-| | And Set interfaces in path up
| | When Init L2 bridge domains with single DUT with Vhost-User and VXLANoIPv4 in 3-node circular topology
| | ... | 172.16.0.1 | 16 | 172.26.0.1 | 16 | 172.16.0.2 | 172.26.0.2
| | ... | ${dut1_vxlans} | ${dut2_vxlans} | 172.17.0.0 | 16 | 172.27.0.0 | 16