aboutsummaryrefslogtreecommitdiffstats
path: root/tests
diff options
context:
space:
mode:
Diffstat (limited to 'tests')
-rw-r--r--tests/honeycomb/func/mgmt-cfg-acl-apihc-apivat-func.robot30
-rw-r--r--tests/vpp/func/ip4/eth2p-ethip4-ip4base-iaclbase-func.robot372
-rw-r--r--tests/vpp/func/ip6/eth2p-ethip6-ip6base-iaclbase-func.robot427
-rw-r--r--tests/vpp/func/l2xc/eth2p-eth-l2xcbase-iaclbase-func.robot63
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-iacldstbase-ndrpdr.robot10
5 files changed, 90 insertions, 812 deletions
diff --git a/tests/honeycomb/func/mgmt-cfg-acl-apihc-apivat-func.robot b/tests/honeycomb/func/mgmt-cfg-acl-apihc-apivat-func.robot
index 3f209e3562..86e8788044 100644
--- a/tests/honeycomb/func/mgmt-cfg-acl-apihc-apivat-func.robot
+++ b/tests/honeycomb/func/mgmt-cfg-acl-apihc-apivat-func.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2017 Cisco and/or its affiliates.
+# Copyright (c) 2019 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
@@ -81,22 +81,22 @@
| | ... | ${node} | ${hc_acl_table['name']} | ${hc_acl_session}
| | Then ACL session from Honeycomb should be
| | ... | ${node} | ${hc_acl_table['name']} | ${hc_acl_session}
-| | And ACL session from VAT should be
-| | ... | ${node} | ${table_index} | ${session_index} | ${vat_acl_session}
+| | And ACL session from PAPI should be
+| | ... | ${node} | ${table_index} | ${vat_acl_session}
| TC05: Honeycomb can remove ACL session
| | [Documentation] | Check if Honeycomb API can remove an ACL session.
| | ...
| | Given ACL session from Honeycomb should be
| | ... | ${node} | ${hc_acl_table['name']} | ${hc_acl_session}
-| | And ACL session from VAT should be
-| | ... | ${node} | ${table_index} | ${session_index} | ${vat_acl_session}
+| | And ACL session from PAPI should be
+| | ... | ${node} | ${table_index} | ${vat_acl_session}
| | When Honeycomb removes ACL session
| | ... | ${node} | ${hc_acl_table['name']} | ${hc_acl_session['match']}
| | Then ACL session from Honeycomb should not exist
| | ... | ${node} | ${hc_acl_table['name']} | ${hc_acl_session['match']}
-| | And ACL session from VAT should not exist
-| | ... | ${node} | ${table_index} | ${session_index}
+| | And ACL session from PAPI should not exist
+| | ... | ${node} | ${table_index}
| TC06: Honeycomb manages more than one ACL session on one table
| | [Documentation] | Check if Honeycomb API can add another ACL session\
@@ -104,20 +104,20 @@
| | ...
| | Given ACL session from Honeycomb should not exist
| | ... | ${node} | ${hc_acl_table['name']} | ${hc_acl_session['match']}
-| | And ACL session from VAT should not exist
-| | ... | ${node} | ${table_index} | ${session_index}
+| | And ACL session from PAPI should not exist
+| | ... | ${node} | ${table_index}
| | When Honeycomb adds ACL session
| | ... | ${node} | ${hc_acl_table['name']} | ${hc_acl_session}
| | And Honeycomb adds ACL session
| | ... | ${node} | ${hc_acl_table['name']} | ${hc_acl_session2}
| | Then ACL session from Honeycomb should be
| | ... | ${node} | ${hc_acl_table['name']} | ${hc_acl_session}
-| | And ACL session from VAT should be
-| | ... | ${node} | ${table_index} | ${session_index} | ${vat_acl_session}
+| | And ACL session from PAPI should be
+| | ... | ${node} | ${table_index} | ${vat_acl_session}
| | And ACL session from Honeycomb should be
| | ... | ${node} | ${hc_acl_table['name']} | ${hc_acl_session2}
-| | And ACL session from VAT should be
-| | ... | ${node} | ${table_index} | ${session_index2} | ${vat_acl_session2}
+| | And ACL session from PAPI should be
+| | ... | ${node} | ${table_index} | ${vat_acl_session2}
| TC07: Honeycomb enables ACL on interface
| | [Documentation] | Check if Honeycomb API can enable ACL on an interface.
@@ -127,8 +127,8 @@
| | ... | ${node} | ${table_index} | ${vat_acl_table}
| | And ACL session from Honeycomb should be
| | ... | ${node} | ${hc_acl_table['name']} | ${hc_acl_session}
-| | And ACL session from VAT should be
-| | ... | ${node} | ${table_index} | ${session_index} | ${vat_acl_session}
+| | And ACL session from PAPI should be
+| | ... | ${node} | ${table_index} | ${vat_acl_session}
| | When Honeycomb enables ACL on interface
| | ... | ${node} | ${interface} | ${hc_acl_table['name']}
| | Then Interface ACL configuration from Honeycomb should be
diff --git a/tests/vpp/func/ip4/eth2p-ethip4-ip4base-iaclbase-func.robot b/tests/vpp/func/ip4/eth2p-ethip4-ip4base-iaclbase-func.robot
index edc9480260..b8528f36d1 100644
--- a/tests/vpp/func/ip4/eth2p-ethip4-ip4base-iaclbase-func.robot
+++ b/tests/vpp/func/ip4/eth2p-ethip4-ip4base-iaclbase-func.robot
@@ -36,10 +36,10 @@
| ... | ingress ACL (iACL) tests use 3-node topology TG - DUT1 - DUT2 - TG with
| ... | one link between the nodes. DUT1 and DUT2 are configured with IPv4
| ... | routing and static routes. DUT1 is configured with iACL on link to TG,
-| ... | iACL classification and permit/deny action are configured on a per test
+| ... | iACL classification and permit action are configured on a per test
| ... | case basis. Test ICMPv4 Echo Request packets are sent in one direction
| ... | by TG on link to DUT1 and received on TG link to DUT2. On receive TG
-| ... | verifies if packets are dropped, or if received verifies packet IPv4
+| ... | verifies if packets are accepted, or if received verifies packet IPv4
| ... | src-addr, dst-addr and MAC addresses.
*** Variables ***
@@ -55,101 +55,10 @@
| ${l2_table}= | l2
*** Test Cases ***
-| TC01: DUT with iACL IPv4 src-addr drops matching pkts
-| | [Documentation]
-| | ... | On DUT1 add source IPv4 address to classify table with 'deny'.\
-| | ... | Make TG verify matching packets are dropped.
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And VPP Interface Set IP Address | ${dut1_node}
-| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And VPP Interface Set IP Address | ${dut1_node}
-| | ... | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length}
-| | And VPP Add IP Neighbor
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW}
-| | ... | ${tg_to_dut2_mac}
-| | And Vpp Route Add
-| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length}
-| | ... | gateway=${dut1_to_dut2_ip_GW} | interface=${dut1_to_dut2}
-| | And Configure L2XC
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
-| | Then Send packet and verify headers | ${tg_node}
-| | ... | ${non_drop_src_ip} | ${test_dst_ip} | ${tg_to_dut1}
-| | ... | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} | ${tg_to_dut2}
-| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
-| | And Send packet and verify headers | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${dut1_to_tg_mac} | ${tg_to_dut2}
-| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
-| | ${table_index} | ${skip_n} | ${match_n}=
-| | ... | When Vpp Creates Classify Table L3 | ${dut1_node}
-| | ... | ${ip_version} | src
-| | And Vpp Configures Classify Session L3
-| | ... | ${dut1_node} | deny | ${table_index} | ${skip_n} | ${match_n}
-| | ... | ${ip_version} | src | ${test_src_ip}
-| | And Vpp Enable Input Acl Interface
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index}
-| | Then Packet transmission from port to port should fail | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${dut1_to_tg_mac} | ${tg_to_dut2}
-| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
-| | And Send packet and verify headers | ${tg_node}
-| | ... | ${non_drop_src_ip} | ${test_dst_ip} | ${tg_to_dut1}
-| | ... | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} | ${tg_to_dut2}
-| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
-
-| TC02: DUT with iACL IPv4 dst-addr drops matching pkts
-| | [Documentation]
-| | ... | On DUT1 add destination IPv4 address to classify table with 'deny'.\
-| | ... | Make TG verify matching packets are dropped.
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And VPP Interface Set IP Address | ${dut1_node}
-| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And VPP Interface Set IP Address | ${dut1_node}
-| | ... | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length}
-| | And VPP Add IP Neighbor
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW}
-| | ... | ${tg_to_dut2_mac}
-| | And Vpp Route Add
-| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length}
-| | ... | gateway=${dut1_to_dut2_ip_GW} | interface=${dut1_to_dut2}
-| | And Vpp Route Add
-| | ... | ${dut1_node} | ${non_drop_dst_ip} | ${prefix_length}
-| | ... | gateway=${dut1_to_dut2_ip_GW} | interface=${dut1_to_dut2}
-| | And Configure L2XC
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
-| | Then Send packet and verify headers | ${tg_node}
-| | ... | ${test_src_ip} | ${non_drop_dst_ip} | ${tg_to_dut1}
-| | ... | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} | ${tg_to_dut2}
-| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
-| | And Send packet and verify headers | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${dut1_to_tg_mac} | ${tg_to_dut2}
-| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
-| | ${table_index} | ${skip_n} | ${match_n}=
-| | ... | When Vpp Creates Classify Table L3 | ${dut1_node}
-| | ... | ${ip_version} | dst
-| | And Vpp Configures Classify Session L3
-| | ... | ${dut1_node} | deny | ${table_index} | ${skip_n} | ${match_n}
-| | ... | ${ip_version} | dst | ${test_dst_ip}
-| | And Vpp Enable Input Acl Interface
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index}
-| | Then Packet transmission from port to port should fail | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${dut1_to_tg_mac} | ${tg_to_dut2}
-| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
-| | And Send packet and verify headers | ${tg_node}
-| | ... | ${test_src_ip} | ${non_drop_dst_ip} | ${tg_to_dut1}
-| | ... | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} | ${tg_to_dut2}
-| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
-
-| TC03: DUT with iACL IPv4 src-addr and dst-addr drops matching pkts
+| TC01: DUT with iACL IPv4 src-addr and dst-addr accepts matching pkts
| | [Documentation]
| | ... | On DUT1 add source and destination IPv4 addresses to classify table\
-| | ... | with 'deny'. Make TG verify matching packets are dropped.
+| | ... | with 'permit'.
| | Given Configure path in 3-node circular topology
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
| | And Set interfaces in 3-node circular topology up
@@ -178,20 +87,21 @@
| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
| | ${table_index_1} | ${skip_n_1} | ${match_n_1}=
| | ... | When Vpp Creates Classify Table L3 | ${dut1_node}
-| | ... | ${ip_version} | src
+| | ... | ${ip_version} | src | ${test_src_ip}
| | ${table_index_2} | ${skip_n_2} | ${match_n_2}=
-| | ... | And Vpp Creates Classify Table L3 | ${dut1_node} | ${ip_version} | dst
+| | ... | And Vpp Creates Classify Table L3 | ${dut1_node} | ${ip_version}
+| | ... | dst | ${test_dst_ip}
| | And Vpp Configures Classify Session L3
-| | ... | ${dut1_node} | deny | ${table_index_1} | ${skip_n_1} | ${match_n_1}
+| | ... | ${dut1_node} | permit | ${table_index_1}
| | ... | ${ip_version} | src | ${test_src_ip}
| | And Vpp Configures Classify Session L3
-| | ... | ${dut1_node} | deny | ${table_index_2} | ${skip_n_2} | ${match_n_2}
+| | ... | ${dut1_node} | permit | ${table_index_2}
| | ... | ${ip_version} | dst | ${test_dst_ip}
| | And Vpp Enable Input Acl Interface
| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index_1}
| | And Vpp Enable Input Acl Interface
| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index_2}
-| | Then Packet transmission from port to port should fail | ${tg_node}
+| | Then Send packet and verify headers | ${tg_node}
| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
| | ... | ${dut1_to_tg_mac} | ${tg_to_dut2}
| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
@@ -200,172 +110,10 @@
| | ... | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} | ${tg_to_dut2}
| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
-| TC04: DUT with iACL IPv4 protocol set to TCP drops matching pkts
-| | [Documentation]
-| | ... | On DUT1 add protocol mask and TCP protocol (0x06) to classify table\
-| | ... | with 'deny'. Make TG verify matching packets are dropped.
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And VPP Interface Set IP Address | ${dut1_node}
-| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And VPP Interface Set IP Address | ${dut1_node}
-| | ... | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length}
-| | And VPP Add IP Neighbor
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW}
-| | ... | ${tg_to_dut2_mac}
-| | And Vpp Route Add
-| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length}
-| | ... | gateway=${dut1_to_dut2_ip_GW} | interface=${dut1_to_dut2}
-| | And Configure L2XC
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
-| | Then Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 80 | 20
-| | And Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 80 | 20
-| | ${table_index} | ${skip_n} | ${match_n}=
-| | ... | When Vpp Creates Classify Table Hex
-| | ... | ${dut1_node} | 0000000000000000000000000000000000000000000000FF
-| | And Vpp Configures Classify Session Hex
-| | ... | ${dut1_node} | deny | ${table_index} | ${skip_n} | ${match_n}
-| | ... | 000000000000000000000000000000000000000000000006
-| | And Vpp Enable Input Acl Interface
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index}
-| | Then TCP or UDP packet transmission should fail | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 80 | 20
-| | And Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 80 | 20
-
-| TC05: DUT with iACL IPv4 protocol set to UDP drops matching pkts
-| | [Documentation]
-| | ... | On DUT1 add protocol mask and UDP protocol (0x11) to classify table\
-| | ... | with 'deny'. Make TG verify matching packets are dropped.
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And VPP Interface Set IP Address | ${dut1_node}
-| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And VPP Interface Set IP Address | ${dut1_node}
-| | ... | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length}
-| | And VPP Add IP Neighbor
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW}
-| | ... | ${tg_to_dut2_mac}
-| | And Vpp Route Add
-| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length}
-| | ... | gateway=${dut1_to_dut2_ip_GW} | interface=${dut1_to_dut2}
-| | And Configure L2XC
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
-| | Then Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 80 | 20
-| | And Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 80 | 20
-| | ${table_index} | ${skip_n} | ${match_n}=
-| | ... | When Vpp Creates Classify Table Hex
-| | ... | ${dut1_node} | 0000000000000000000000000000000000000000000000FF
-| | And Vpp Configures Classify Session Hex
-| | ... | ${dut1_node} | deny | ${table_index} | ${skip_n} | ${match_n}
-| | ... | 000000000000000000000000000000000000000000000011
-| | And Vpp Enable Input Acl Interface
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index}
-| | Then TCP or UDP packet transmission should fail | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 80 | 20
-| | And Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 80 | 20
-
-| TC06: DUT with iACL IPv4 TCP src-ports drops matching pkts
-| | [Documentation]
-| | ... | On DUT1 add TCP source ports to classify table with 'deny'.\
-| | ... | Make TG verify matching packets are dropped.
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And VPP Interface Set IP Address | ${dut1_node}
-| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And VPP Interface Set IP Address | ${dut1_node}
-| | ... | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length}
-| | And VPP Add IP Neighbor
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW}
-| | ... | ${tg_to_dut2_mac}
-| | And Vpp Route Add
-| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length}
-| | ... | gateway=${dut1_to_dut2_ip_GW} | interface=${dut1_to_dut2}
-| | And Configure L2XC
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
-| | Then Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 110 | 20
-| | And Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 80 | 20
-| | ${hex_mask}= | Compute Classify Hex Mask | ${ip_version} | TCP | source
-| | ${hex_value}= | Compute Classify Hex Value | ${hex_mask} | 80 | 0
-| | ${table_index} | ${skip_n} | ${match_n}=
-| | ... | When Vpp Creates Classify Table Hex | ${dut1_node} | ${hex_mask}
-| | And Vpp Configures Classify Session Hex
-| | ... | ${dut1_node} | deny | ${table_index} | ${skip_n} | ${match_n}
-| | ... | ${hex_value}
-| | And Vpp Enable Input Acl Interface
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index}
-| | Then TCP or UDP packet transmission should fail | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 80 | 20
-| | And Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 110 | 20
-
-| TC07: DUT with iACL IPv4 TCP dst-ports drops matching pkts
-| | [Documentation]
-| | ... | On DUT1 add TCP destination ports to classify table with 'deny'.\
-| | ... | Make TG verify matching packets are dropped.
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And VPP Interface Set IP Address | ${dut1_node}
-| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And VPP Interface Set IP Address | ${dut1_node}
-| | ... | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length}
-| | And VPP Add IP Neighbor
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW}
-| | ... | ${tg_to_dut2_mac}
-| | And Vpp Route Add
-| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length}
-| | ... | gateway=${dut1_to_dut2_ip_GW} | interface=${dut1_to_dut2}
-| | And Configure L2XC
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
-| | Then Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 20 | 110
-| | And Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 20 | 80
-| | ${hex_mask}= | Compute Classify Hex Mask | ${ip_version} | TCP | destination
-| | ${hex_value}= | Compute Classify Hex Value | ${hex_mask} | 0 | 80
-| | ${table_index} | ${skip_n} | ${match_n}=
-| | ... | When Vpp Creates Classify Table Hex | ${dut1_node} | ${hex_mask}
-| | And Vpp Configures Classify Session Hex
-| | ... | ${dut1_node} | deny | ${table_index} | ${skip_n} | ${match_n}
-| | ... | ${hex_value}
-| | And Vpp Enable Input Acl Interface
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index}
-| | Then TCP or UDP packet transmission should fail | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 20 | 80
-| | And Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 20 | 110
-
-| TC08: DUT with iACL IPv4 TCP src-ports and dst-ports drops matching pkts
+| TC02: DUT with iACL IPv4 TCP src-ports and dst-ports accepts matching pkts
| | [Documentation]
| | ... | On DUT1 add TCP source and destination ports to classify table\
-| | ... | with 'deny'. Make TG verify matching packets are dropped.
+| | ... | with 'permit'.
| | Given Configure path in 3-node circular topology
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
| | And Set interfaces in 3-node circular topology up
@@ -393,103 +141,20 @@
| | ${table_index} | ${skip_n} | ${match_n}=
| | ... | When Vpp Creates Classify Table Hex | ${dut1_node} | ${hex_mask}
| | And Vpp Configures Classify Session Hex
-| | ... | ${dut1_node} | deny | ${table_index} | ${skip_n} | ${match_n}
-| | ... | ${hex_value}
+| | ... | ${dut1_node} | permit | ${table_index} | ${hex_value}
| | And Vpp Enable Input Acl Interface
| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index}
-| | Then TCP or UDP packet transmission should fail | ${tg_node}
+| | Then Send TCP or UDP packet and verify received packet | ${tg_node}
| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 80 | 20
| | And Send TCP or UDP packet and verify received packet | ${tg_node}
| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 110 | 25
-| TC09: DUT with iACL IPv4 UDP src-ports drops matching pkts
-| | [Documentation]
-| | ... | On DUT1 add UDP source ports to classify table with 'deny'.\
-| | ... | Make TG verify matching packets are dropped.
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And VPP Interface Set IP Address | ${dut1_node}
-| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And VPP Interface Set IP Address | ${dut1_node}
-| | ... | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length}
-| | And VPP Add IP Neighbor
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW}
-| | ... | ${tg_to_dut2_mac}
-| | And Vpp Route Add
-| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length}
-| | ... | gateway=${dut1_to_dut2_ip_GW} | interface=${dut1_to_dut2}
-| | And Configure L2XC
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
-| | Then Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 110 | 20
-| | And Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 80 | 20
-| | ${hex_mask}= | Compute Classify Hex Mask | ${ip_version} | UDP | source
-| | ${hex_value}= | Compute Classify Hex Value | ${hex_mask} | 80 | 0
-| | ${table_index} | ${skip_n} | ${match_n}=
-| | ... | When Vpp Creates Classify Table Hex | ${dut1_node} | ${hex_mask}
-| | And Vpp Configures Classify Session Hex
-| | ... | ${dut1_node} | deny | ${table_index} | ${skip_n} | ${match_n}
-| | ... | ${hex_value}
-| | And Vpp Enable Input Acl Interface
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index}
-| | Then TCP or UDP packet transmission should fail | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 80 | 20
-| | And Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 110 | 20
-
-| TC10: DUT with iACL IPv4 UDP dst-ports drops matching pkts
-| | [Documentation]
-| | ... | On DUT1 add TCP destination ports to classify table with 'deny'.\
-| | ... | Make TG verify matching packets are dropped.
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And VPP Interface Set IP Address | ${dut1_node}
-| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And VPP Interface Set IP Address | ${dut1_node}
-| | ... | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length}
-| | And VPP Add IP Neighbor
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW}
-| | ... | ${tg_to_dut2_mac}
-| | And Vpp Route Add
-| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length}
-| | ... | gateway=${dut1_to_dut2_ip_GW} | interface=${dut1_to_dut2}
-| | And Configure L2XC
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
-| | Then Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 20 | 110
-| | And Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 20 | 80
-| | ${hex_mask}= | Compute Classify Hex Mask | ${ip_version} | UDP | destination
-| | ${hex_value}= | Compute Classify Hex Value | ${hex_mask} | 0 | 80
-| | ${table_index} | ${skip_n} | ${match_n}=
-| | ... | When Vpp Creates Classify Table Hex | ${dut1_node} | ${hex_mask}
-| | And Vpp Configures Classify Session Hex
-| | ... | ${dut1_node} | deny | ${table_index} | ${skip_n} | ${match_n}
-| | ... | ${hex_value}
-| | And Vpp Enable Input Acl Interface
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index}
-| | Then TCP or UDP packet transmission should fail | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 20 | 80
-| | And Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 20 | 110
-
-| TC11: DUT with iACL IPv4 UDP src-ports and dst-ports drops matching pkts
+| TC03: DUT with iACL IPv4 UDP src-ports and dst-ports accepts matching pkts
| | [Documentation]
| | ... | On DUT1 add UDP source and destination ports to classify table\
-| | ... | with 'deny'. Make TG verify matching packets are dropped.
+| | ... | with 'permit'.
| | Given Configure path in 3-node circular topology
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
| | And Set interfaces in 3-node circular topology up
@@ -517,11 +182,10 @@
| | ${table_index} | ${skip_n} | ${match_n}=
| | ... | When Vpp Creates Classify Table Hex | ${dut1_node} | ${hex_mask}
| | And Vpp Configures Classify Session Hex
-| | ... | ${dut1_node} | deny | ${table_index} | ${skip_n} | ${match_n}
-| | ... | ${hex_value}
+| | ... | ${dut1_node} | permit | ${table_index} | ${hex_value}
| | And Vpp Enable Input Acl Interface
| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index}
-| | Then TCP or UDP packet transmission should fail | ${tg_node}
+| | Then Send TCP or UDP packet and verify received packet | ${tg_node}
| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 80 | 20
| | And Send TCP or UDP packet and verify received packet | ${tg_node}
diff --git a/tests/vpp/func/ip6/eth2p-ethip6-ip6base-iaclbase-func.robot b/tests/vpp/func/ip6/eth2p-ethip6-ip6base-iaclbase-func.robot
index 74a92d26ed..ad0d322948 100644
--- a/tests/vpp/func/ip6/eth2p-ethip6-ip6base-iaclbase-func.robot
+++ b/tests/vpp/func/ip6/eth2p-ethip6-ip6base-iaclbase-func.robot
@@ -36,10 +36,10 @@
| ... | ingress ACL (iACL) tests use 3-node topology TG - DUT1 - DUT2 - TG with
| ... | one link between the nodes. DUT1 and DUT2 are configured with IPv6
| ... | routing and static routes. DUT1 is configured with iACL on link to TG,
-| ... | iACL classification and permit/deny action are configured on a per test
+| ... | iACL classification and permit action are configured on a per test
| ... | case basis. Test ICMPv6 Echo Request packets are sent in one direction
| ... | by TG on link to DUT1 and received on TG link to DUT2. On receive TG
-| ... | verifies if packets are dropped, or if received verifies packet IPv6
+| ... | verifies if packets are accepted, or if received verifies packet IPv6
| ... | src-addr, dst-addr and MAC addresses.
*** Variables ***
@@ -57,103 +57,10 @@
| ${l2_table}= | l2
*** Test Cases ***
-| TC01: DUT with iACL IPv6 src-addr drops matching pkts
-| | [Documentation]
-| | ... | On DUT1 add source IPv6 address to classify table with 'deny'.\
-| | ... | Make TG verify matching packets are dropped.
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And VPP Interface Set IP Address
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And VPP Interface Set IP Address
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length}
-| | And VPP Add IP Neighbor
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW}
-| | ... | ${tg_to_dut2_mac}
-| | And Vpp Route Add
-| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length}
-| | ... | gateway=${dut1_to_dut2_ip_GW} | interface=${dut1_to_dut2}
-| | And Configure L2XC
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
-| | And Vpp All Ra Suppress Link Layer | ${nodes}
-| | Then Send packet and verify headers | ${tg_node}
-| | ... | ${non_drop_src_ip} | ${test_dst_ip} | ${tg_to_dut1}
-| | ... | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} | ${tg_to_dut2}
-| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
-| | And Send packet and verify headers | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${dut1_to_tg_mac} | ${tg_to_dut2}
-| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
-| | ${table_index} | ${skip_n} | ${match_n}=
-| | ... | When Vpp Creates Classify Table L3 | ${dut1_node}
-| | ... | ${ip_version} | src
-| | And Vpp Configures Classify Session L3
-| | ... | ${dut1_node} | deny | ${table_index} | ${skip_n} | ${match_n}
-| | ... | ${ip_version} | src | ${test_src_ip}
-| | And Vpp Enable Input Acl Interface
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index}
-| | Then Packet transmission from port to port should fail | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${dut1_to_tg_mac} | ${tg_to_dut2}
-| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
-| | And Send packet and verify headers | ${tg_node}
-| | ... | ${non_drop_src_ip} | ${test_dst_ip} | ${tg_to_dut1}
-| | ... | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} | ${tg_to_dut2}
-| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
-
-| TC02: DUT with iACL IPv6 dst-addr drops matching pkts
-| | [Documentation]
-| | ... | On DUT1 add destination IPv6 address to classify table with 'deny'.\
-| | ... | Make TG verify matching packets are dropped.
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And VPP Interface Set IP Address
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And VPP Interface Set IP Address
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length}
-| | And VPP Add IP Neighbor
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW}
-| | ... | ${tg_to_dut2_mac}
-| | And Vpp Route Add
-| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length}
-| | ... | gateway=${dut1_to_dut2_ip_GW} | interface=${dut1_to_dut2}
-| | And Vpp Route Add
-| | ... | ${dut1_node} | ${non_drop_dst_ip} | ${prefix_length}
-| | ... | gateway=${dut1_to_dut2_ip_GW} | interface=${dut1_to_dut2}
-| | And Configure L2XC
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
-| | And Vpp All Ra Suppress Link Layer | ${nodes}
-| | Then Send packet and verify headers | ${tg_node}
-| | ... | ${test_src_ip} | ${non_drop_dst_ip} | ${tg_to_dut1}
-| | ... | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} | ${tg_to_dut2}
-| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
-| | And Send packet and verify headers | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${dut1_to_tg_mac} | ${tg_to_dut2}
-| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
-| | ${table_index} | ${skip_n} | ${match_n}=
-| | ... | When Vpp Creates Classify Table L3 | ${dut1_node}
-| | ... | ${ip_version} | dst
-| | And Vpp Configures Classify Session L3
-| | ... | ${dut1_node} | deny | ${table_index} | ${skip_n} | ${match_n}
-| | ... | ${ip_version} | dst | ${test_dst_ip}
-| | And Vpp Enable Input Acl Interface
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index}
-| | Then Packet transmission from port to port should fail | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${dut1_to_tg_mac} | ${tg_to_dut2}
-| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
-| | And Send packet and verify headers | ${tg_node}
-| | ... | ${test_src_ip} | ${non_drop_dst_ip} | ${tg_to_dut1}
-| | ... | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} | ${tg_to_dut2}
-| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
-
-| TC03: DUT with iACL IPv6 src-addr and dst-addr drops matching pkts
+| TC01: DUT with iACL IPv6 src-addr and dst-addr accepts matching pkts
| | [Documentation]
| | ... | On DUT1 add source and destination IPv6 addresses to classify table\
-| | ... | with 'deny'. Make TG verify matching packets are dropped.
+| | ... | with 'permit'.
| | Given Configure path in 3-node circular topology
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
| | And Set interfaces in 3-node circular topology up
@@ -183,20 +90,21 @@
| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
| | ${table_index_1} | ${skip_n_1} | ${match_n_1}=
| | ... | When Vpp Creates Classify Table L3 | ${dut1_node}
-| | ... | ${ip_version} | src
+| | ... | ${ip_version} | src | ${test_src_ip}
| | ${table_index_2} | ${skip_n_2} | ${match_n_2}=
-| | ... | And Vpp Creates Classify Table L3 | ${dut1_node} | ${ip_version} | dst
+| | ... | And Vpp Creates Classify Table L3 | ${dut1_node} | ${ip_version}
+| | ... | dst | ${test_dst_ip}
| | And Vpp Configures Classify Session L3
-| | ... | ${dut1_node} | deny | ${table_index_1} | ${skip_n_1} | ${match_n_1}
+| | ... | ${dut1_node} | permit | ${table_index_1}
| | ... | ${ip_version} | src | ${test_src_ip}
| | And Vpp Configures Classify Session L3
-| | ... | ${dut1_node} | deny | ${table_index_2} | ${skip_n_2} | ${match_n_2}
+| | ... | ${dut1_node} | permit | ${table_index_2}
| | ... | ${ip_version} | dst | ${test_dst_ip}
| | And Vpp Enable Input Acl Interface
| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index_1}
| | And Vpp Enable Input Acl Interface
| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index_2}
-| | Then Packet transmission from port to port should fail | ${tg_node}
+| | Then Send packet and verify headers | ${tg_node}
| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
| | ... | ${dut1_to_tg_mac} | ${tg_to_dut2}
| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
@@ -205,183 +113,18 @@
| | ... | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} | ${tg_to_dut2}
| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
-| TC04: DUT with iACL IPv6 protocol set to TCP drops matching pkts
-| | [Documentation]
-| | ... | On DUT1 add protocol mask and TCP protocol (0x06) to classify table\
-| | ... | with 'deny'. Make TG verify matching packets are dropped.
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And VPP Interface Set IP Address
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And VPP Interface Set IP Address
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length}
-| | And VPP Add IP Neighbor
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW}
-| | ... | ${tg_to_dut2_mac}
-| | And Vpp Route Add
-| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length}
-| | ... | gateway=${dut1_to_dut2_ip_GW} | interface=${dut1_to_dut2}
-| | And Configure L2XC
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
-| | And Vpp All Ra Suppress Link Layer | ${nodes}
-| | Then Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 80 | 20
-| | And Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 80 | 20
-| | ${table_index} | ${skip_n} | ${match_n}=
-| | ... | When Vpp Creates Classify Table Hex
-| | ... | ${dut1_node} | 0000000000000000000000000000000000000000FF
-| | And Vpp Configures Classify Session Hex
-| | ... | ${dut1_node} | deny | ${table_index} | ${skip_n} | ${match_n}
-| | ... | 000000000000000000000000000000000000000006
-| | And Vpp Enable Input Acl Interface
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index}
-| | Then TCP or UDP packet transmission should fail | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 80 | 20
-| | And Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 80 | 20
-
-| TC05: DUT with iACL IPv6 protocol set to UDP drops matching pkts
-| | [Documentation]
-| | ... | On DUT1 add protocol mask and UDP protocol (0x11) to classify table\
-| | ... | with 'deny'. Make TG verify matching packets are dropped.
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And VPP Interface Set IP Address
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And VPP Interface Set IP Address
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length}
-| | And VPP Add IP Neighbor
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW}
-| | ... | ${tg_to_dut2_mac}
-| | And Vpp Route Add
-| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length}
-| | ... | gateway=${dut1_to_dut2_ip_GW} | interface=${dut1_to_dut2}
-| | And Configure L2XC
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
-| | And Vpp All Ra Suppress Link Layer | ${nodes}
-| | Then Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 80 | 20
-| | And Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 80 | 20
-| | ${table_index} | ${skip_n} | ${match_n}=
-| | ... | When Vpp Creates Classify Table Hex
-| | ... | ${dut1_node} | 0000000000000000000000000000000000000000FF
-| | And Vpp Configures Classify Session Hex
-| | ... | ${dut1_node} | deny | ${table_index} | ${skip_n} | ${match_n}
-| | ... | 000000000000000000000000000000000000000011
-| | And Vpp Enable Input Acl Interface
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index}
-| | Then TCP or UDP packet transmission should fail | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 80 | 20
-| | And Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 80 | 20
-
-| TC06: DUT with iACL IPv6 TCP src-ports drops matching pkts
-| | [Documentation]
-| | ... | On DUT1 add TCP source ports to classify table with 'deny'.\
-| | ... | Make TG verify matching packets are dropped.
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And VPP Interface Set IP Address
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And VPP Interface Set IP Address
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length}
-| | And VPP Add IP Neighbor
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW}
-| | ... | ${tg_to_dut2_mac}
-| | And Vpp Route Add
-| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length}
-| | ... | gateway=${dut1_to_dut2_ip_GW} | interface=${dut1_to_dut2}
-| | And Configure L2XC
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
-| | And Vpp All Ra Suppress Link Layer | ${nodes}
-| | Then Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 110 | 20
-| | And Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 80 | 20
-| | ${hex_mask}= | Compute Classify Hex Mask | ${ip_version} | TCP | source
-| | ${hex_value}= | Compute Classify Hex Value | ${hex_mask} | 80 | 0
-| | ${table_index} | ${skip_n} | ${match_n}=
-| | ... | When Vpp Creates Classify Table Hex | ${dut1_node} | ${hex_mask}
-| | And Vpp Configures Classify Session Hex
-| | ... | ${dut1_node} | deny | ${table_index} | ${skip_n} | ${match_n}
-| | ... | ${hex_value}
-| | And Vpp Enable Input Acl Interface
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index}
-| | Then TCP or UDP packet transmission should fail | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 80 | 20
-| | And Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 110 | 20
-
-| TC07: DUT with iACL IPv6 TCP dst-ports drops matching pkts
-| | [Documentation]
-| | ... | On DUT1 add TCP destination ports to classify table with 'deny'.\
-| | ... | Make TG verify matching packets are dropped.
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And VPP Interface Set IP Address
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And VPP Interface Set IP Address
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length}
-| | And VPP Add IP Neighbor
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW}
-| | ... | ${tg_to_dut2_mac}
-| | And Vpp Route Add
-| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length}
-| | ... | gateway=${dut1_to_dut2_ip_GW} | interface=${dut1_to_dut2}
-| | And Configure L2XC
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
-| | And Vpp All Ra Suppress Link Layer | ${nodes}
-| | Then Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 20 | 110
-| | And Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 20 | 80
-| | ${hex_mask}= | Compute Classify Hex Mask | ${ip_version} | TCP | destination
-| | ${hex_value}= | Compute Classify Hex Value | ${hex_mask} | 0 | 80
-| | ${table_index} | ${skip_n} | ${match_n}=
-| | ... | When Vpp Creates Classify Table Hex | ${dut1_node} | ${hex_mask}
-| | And Vpp Configures Classify Session Hex
-| | ... | ${dut1_node} | deny | ${table_index} | ${skip_n} | ${match_n}
-| | ... | ${hex_value}
-| | And Vpp Enable Input Acl Interface
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index}
-| | Then TCP or UDP packet transmission should fail | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 20 | 80
-| | And Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 20 | 110
-
-| TC08: DUT with iACL IPv6 TCP src-ports and dst-ports drops matching pkts
+| TC02: DUT with iACL IPv6 TCP src-ports and dst-ports accepts matching pkts
| | [Documentation]
| | ... | On DUT1 add TCP source and destination ports to classify table\
-| | ... | with 'deny'. Make TG verify matching packets are dropped.
+| | ... | with 'permit'.
| | Given Configure path in 3-node circular topology
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
| | And Set interfaces in 3-node circular topology up
| | And VPP Interface Set IP Address
| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
| | And VPP Interface Set IP Address
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length}
+| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip}
+| | ... | ${prefix_length}
| | And VPP Add IP Neighbor
| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW}
| | ... | ${tg_to_dut2_mac}
@@ -403,112 +146,28 @@
| | ${table_index} | ${skip_n} | ${match_n}=
| | ... | When Vpp Creates Classify Table Hex | ${dut1_node} | ${hex_mask}
| | And Vpp Configures Classify Session Hex
-| | ... | ${dut1_node} | deny | ${table_index} | ${skip_n} | ${match_n}
-| | ... | ${hex_value}
+| | ... | ${dut1_node} | permit | ${table_index} | ${hex_value}
| | And Vpp Enable Input Acl Interface
| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index}
-| | Then TCP or UDP packet transmission should fail | ${tg_node}
+| | Then Send TCP or UDP packet and verify received packet | ${tg_node}
| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 80 | 20
| | And Send TCP or UDP packet and verify received packet | ${tg_node}
| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 110 | 25
-| TC09: DUT with iACL IPv6 UDP src-ports drops matching pkts
-| | [Documentation]
-| | ... | On DUT1 add UDP source ports to classify table with 'deny'.\
-| | ... | Make TG verify matching packets are dropped.
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And VPP Interface Set IP Address
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And VPP Interface Set IP Address
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length}
-| | And VPP Add IP Neighbor
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW}
-| | ... | ${tg_to_dut2_mac}
-| | And Vpp Route Add
-| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length}
-| | ... | gateway=${dut1_to_dut2_ip_GW} | interface=${dut1_to_dut2}
-| | And Configure L2XC
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
-| | And Vpp All Ra Suppress Link Layer | ${nodes}
-| | Then Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 110 | 20
-| | And Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 80 | 20
-| | ${hex_mask}= | Compute Classify Hex Mask | ${ip_version} | UDP | source
-| | ${hex_value}= | Compute Classify Hex Value | ${hex_mask} | 80 | 0
-| | ${table_index} | ${skip_n} | ${match_n}=
-| | ... | When Vpp Creates Classify Table Hex | ${dut1_node} | ${hex_mask}
-| | And Vpp Configures Classify Session Hex
-| | ... | ${dut1_node} | deny | ${table_index} | ${skip_n} | ${match_n}
-| | ... | ${hex_value}
-| | And Vpp Enable Input Acl Interface
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index}
-| | Then TCP or UDP packet transmission should fail | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 80 | 20
-| | And Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 110 | 20
-
-| TC10: DUT with iACL IPv6 UDP dst-ports drops matching pkts
-| | [Documentation]
-| | ... | On DUT1 add TCP destination ports to classify table with 'deny'.\
-| | ... | Make TG verify matching packets are dropped.
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And VPP Interface Set IP Address
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And VPP Interface Set IP Address
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length}
-| | And VPP Add IP Neighbor
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW}
-| | ... | ${tg_to_dut2_mac}
-| | And Vpp Route Add
-| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length}
-| | ... | gateway=${dut1_to_dut2_ip_GW} | interface=${dut1_to_dut2}
-| | And Configure L2XC
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
-| | And Vpp All Ra Suppress Link Layer | ${nodes}
-| | Then Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 20 | 110
-| | And Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 20 | 80
-| | ${hex_mask}= | Compute Classify Hex Mask | ${ip_version} | UDP | destination
-| | ${hex_value}= | Compute Classify Hex Value | ${hex_mask} | 0 | 80
-| | ${table_index} | ${skip_n} | ${match_n}=
-| | ... | When Vpp Creates Classify Table Hex | ${dut1_node} | ${hex_mask}
-| | And Vpp Configures Classify Session Hex
-| | ... | ${dut1_node} | deny | ${table_index} | ${skip_n} | ${match_n}
-| | ... | ${hex_value}
-| | And Vpp Enable Input Acl Interface
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index}
-| | Then TCP or UDP packet transmission should fail | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 20 | 80
-| | And Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 20 | 110
-
-| TC11: DUT with iACL IPv6 UDP src-ports and dst-ports drops matching pkts
+| TC03: DUT with iACL IPv6 UDP src-ports and dst-ports accepts matching pkts
| | [Documentation]
| | ... | On DUT1 add UDP source and destination ports to classify table\
-| | ... | with 'deny'. Make TG verify matching packets are dropped.
+| | ... | with 'permit'.
| | Given Configure path in 3-node circular topology
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
| | And Set interfaces in 3-node circular topology up
| | And VPP Interface Set IP Address
| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
| | And VPP Interface Set IP Address
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length}
+| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip}
+| | ... | ${prefix_length}
| | And VPP Add IP Neighbor
| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW}
| | ... | ${tg_to_dut2_mac}
@@ -530,54 +189,12 @@
| | ${table_index} | ${skip_n} | ${match_n}=
| | ... | When Vpp Creates Classify Table Hex | ${dut1_node} | ${hex_mask}
| | And Vpp Configures Classify Session Hex
-| | ... | ${dut1_node} | deny | ${table_index} | ${skip_n} | ${match_n}
-| | ... | ${hex_value}
+| | ... | ${dut1_node} | permit | ${table_index} | ${hex_value}
| | And Vpp Enable Input Acl Interface
| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index}
-| | Then TCP or UDP packet transmission should fail | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 80 | 20
-| | And Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 110 | 25
-
-| TC12: DUT with iACL MAC src-addr and iACL IPv6 UDP src-ports and dst-ports drops matching pkts
-| | [Documentation]
-| | ... | On DUT1 add source MAC address to classify (L2) table and add UDP\
-| | ... | source and destination ports to classify (hex) table with 'deny'.
-| | ... | Make TG verify matching packets are dropped.
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And Configure L2XC
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_tg}
-| | And Configure L2XC
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
-| | And Vpp All Ra Suppress Link Layer | ${nodes}
| | Then Send TCP or UDP packet and verify received packet | ${tg_node}
| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 110 | 25
-| | And Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 80 | 20
-| | ${table_index} | ${skip_n} | ${match_n}=
-| | ... | When Vpp Creates Classify Table L2 | ${dut1_node} | src
-| | And Vpp Configures Classify Session L2
-| | ... | ${dut1_node} | deny | ${table_index} | ${skip_n} | ${match_n}
-| | ... | src | ${tg_to_dut1_mac}
-| | ${hex_mask}= | Compute Classify Hex Mask | ${ip_version} | UDP
-| | ... | source + destination
-| | ${hex_value}= | Compute Classify Hex Value | ${hex_mask} | 80 | 20
-| | ${table_index} | ${skip_n} | ${match_n}=
-| | ... | When Vpp Creates Classify Table Hex | ${dut1_node} | ${hex_mask}
-| | And Vpp Configures Classify Session Hex
-| | ... | ${dut1_node} | deny | ${table_index} | ${skip_n} | ${match_n}
-| | ... | ${hex_value}
-| | And Vpp Enable Input Acl Interface
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${l2_table} | ${table_index}
-| | Then Send TCP or UDP packet and verify received packet | ${tg_node}
+| | And Send TCP or UDP packet and verify received packet | ${tg_node}
| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 110 | 25
-| | And TCP or UDP packet transmission should fail | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 80 | 20
diff --git a/tests/vpp/func/l2xc/eth2p-eth-l2xcbase-iaclbase-func.robot b/tests/vpp/func/l2xc/eth2p-eth-l2xcbase-iaclbase-func.robot
index b62f0f8731..c12a6100f4 100644
--- a/tests/vpp/func/l2xc/eth2p-eth-l2xcbase-iaclbase-func.robot
+++ b/tests/vpp/func/l2xc/eth2p-eth-l2xcbase-iaclbase-func.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
+# Copyright (c) 2019 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
@@ -31,17 +31,16 @@
| ... | DUT1 is configured with iACL classification on link to TG,
| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are sent
| ... | in one direction by TG on link to DUT1 and received on TG link
-| ... | to DUT2. On receive TG verifies if packets are dropped.
+| ... | to DUT2. On receive TG verifies if packets are accepted.
*** Variables ***
| ${l2_table}= | l2
*** Test Cases ***
-| TC01: DUT with iACL MAC src-addr drops matching pkts
+| TC01: DUT with iACL MAC src-addr accepts matching pkts
| | [Documentation]
| | ... | [Top] TG-DUT1-DUT2-TG.
-| | ... | [Cfg] On DUT1 add source MAC address to classify table with 'deny'.
-| | ... | [Ver] Make TG verify matching packets are dropped.
+| | ... | [Cfg] On DUT1 add source MAC address to classify table with 'permit'.
| | Given Configure path in 3-node circular topology
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
| | And Set interfaces in 3-node circular topology up
@@ -52,21 +51,21 @@
| | Then Send ICMP packet and verify received packet
| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2}
| | ${table_index} | ${skip_n} | ${match_n}=
-| | ... | When Vpp Creates Classify Table L2 | ${dut1_node} | src
-| | And Vpp Configures Classify Session L2
-| | ... | ${dut1_node} | deny | ${table_index} | ${skip_n} | ${match_n}
+| | ... | When Vpp Creates Classify Table L2 | ${dut1_node}
| | ... | src | ${tg_to_dut1_mac}
+| | And Vpp Configures Classify Session L2
+| | ... | ${dut1_node} | permit | ${table_index} | src | ${tg_to_dut1_mac}
| | And Vpp Enable Input ACL Interface
| | ... | ${dut1_node} | ${dut1_to_tg} | ${l2_table} | ${table_index}
-| | Then ICMP packet transmission should fail
+| | Then Send ICMP packet and verify received packet
| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2}
-| TC02: DUT with iACL MAC dst-addr drops matching pkts
+| TC02: DUT with iACL MAC dst-addr accepts matching pkts
| | [Documentation]
| | ... | [Top] TG-DUT1-DUT2-TG.
| | ... | [Cfg] On DUT1 add destination MAC address to classify
-| | ... | table with 'deny'.
-| | ... | [Ver] Make TG verify matching packets are dropped.
+| | ... | table with 'permit'.
+| | ... | [Ver] Make TG verify matching packets are accepted.
| | Given Configure path in 3-node circular topology
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
| | And Set interfaces in 3-node circular topology up
@@ -77,21 +76,21 @@
| | Then Send ICMP packet and verify received packet
| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2}
| | ${table_index} | ${skip_n} | ${match_n}=
-| | ... | When Vpp Creates Classify Table L2 | ${dut1_node} | dst
-| | And Vpp Configures Classify Session L2
-| | ... | ${dut1_node} | deny | ${table_index} | ${skip_n} | ${match_n}
+| | ... | When Vpp Creates Classify Table L2 | ${dut1_node}
| | ... | dst | ${tg_to_dut2_mac}
+| | And Vpp Configures Classify Session L2
+| | ... | ${dut1_node} | permit | ${table_index} | dst | ${tg_to_dut2_mac}
| | And Vpp Enable Input ACL Interface
| | ... | ${dut1_node} | ${dut1_to_tg} | ${l2_table} | ${table_index}
-| | Then ICMP packet transmission should fail
+| | Then Send ICMP packet and verify received packet
| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2}
-| TC03: DUT with iACL MAC src-addr and dst-addr drops matching pkts
+| TC03: DUT with iACL MAC src-addr and dst-addr accepts matching pkts
| | [Documentation]
| | ... | [Top] TG-DUT1-DUT2-TG.
| | ... | [Cfg] On DUT1 add source and destination MAC address to classify
-| | ... | table with 'deny'.
-| | ... | [Ver] Make TG verify matching packets are dropped.
+| | ... | table with 'permit'.
+| | ... | [Ver] Make TG verify matching packets are accepted.
| | Given Configure path in 3-node circular topology
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
| | And Set interfaces in 3-node circular topology up
@@ -102,27 +101,28 @@
| | Then Send ICMP packet and verify received packet
| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2}
| | ${table_index_1} | ${skip_n_1} | ${match_n_1}=
-| | ... | When Vpp Creates Classify Table L2 | ${dut1_node} | src
-| | And Vpp Configures Classify Session L2
-| | ... | ${dut1_node} | deny | ${table_index_1} | ${skip_n_1} | ${match_n_1}
+| | ... | When Vpp Creates Classify Table L2 | ${dut1_node}
| | ... | src | ${tg_to_dut1_mac}
-| | ${table_index_2} | ${skip_n_2} | ${match_n_2}=
-| | ... | When Vpp Creates Classify Table L2 | ${dut1_node} | dst
| | And Vpp Configures Classify Session L2
-| | ... | ${dut1_node} | deny | ${table_index_2} | ${skip_n_2} | ${match_n_2}
+| | ... | ${dut1_node} | permit | ${table_index_1} | src | ${tg_to_dut1_mac}
+| | ${table_index_2} | ${skip_n_2} | ${match_n_2}=
+| | ... | When Vpp Creates Classify Table L2 | ${dut1_node}
| | ... | dst | ${tg_to_dut1_mac}
+| | And Vpp Configures Classify Session L2
+| | ... | ${dut1_node} | permit | ${table_index_2} | dst | ${tg_to_dut1_mac}
| | And Vpp Enable Input ACL Interface
| | ... | ${dut1_node} | ${dut1_to_tg} | ${l2_table} | ${table_index_1}
| | And Vpp Enable Input ACL Interface
| | ... | ${dut1_node} | ${dut1_to_tg} | ${l2_table} | ${table_index_2}
-| | Then ICMP packet transmission should fail
+| | Then Send ICMP packet and verify received packet
| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2}
-| TC04: DUT with iACL EtherType drops matching pkts
+| TC04: DUT with iACL EtherType accepts matching pkts
| | [Documentation]
| | ... | [Top] TG-DUT1-DUT2-TG.
-| | ... | [Cfg] On DUT1 add EtherType IPv4(0x0800) to classify table with 'deny'.
-| | ... | [Ver] Make TG verify matching packets are dropped.
+| | ... | [Cfg] On DUT1 add EtherType IPv4(0x0800) to classify table with
+| | ... | 'permit'.
+| | ... | [Ver] Make TG verify matching packets are accepted.
| | Given Configure path in 3-node circular topology
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
| | And Set interfaces in 3-node circular topology up
@@ -136,9 +136,8 @@
| | ... | When Vpp Creates Classify Table Hex
| | ... | ${dut1_node} | 000000000000000000000000ffff
| | And Vpp Configures Classify Session Hex
-| | ... | ${dut1_node} | deny | ${table_index} | ${skip_n} | ${match_n}
-| | ... | 0000000000000000000000000800
+| | ... | ${dut1_node} | permit | ${table_index} | 0000000000000000000000000800
| | And Vpp Enable Input ACL Interface
| | ... | ${dut1_node} | ${dut1_to_tg} | ${l2_table} | ${table_index}
-| | Then ICMP packet transmission should fail
+| | Then Send ICMP packet and verify received packet
| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2}
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-iacldstbase-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-iacldstbase-ndrpdr.robot
index a4a3fcaa4b..4a97f0f885 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-iacldstbase-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-iacldstbase-ndrpdr.robot
@@ -77,17 +77,15 @@
| | And Apply startup configuration on all VPP DUTs
| | When Initialize IPv4 forwarding in circular topology
| | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3
-| | ... | ${dut1} | ip4 | dst
+| | ... | ${dut1} | ip4 | dst | 20.20.20.2
| | And Vpp Configures Classify Session L3
-| | ... | ${dut1} | permit | ${table_idx} | ${skip_n} | ${match_n}
-| | ... | ip4 | dst | 20.20.20.2
+| | ... | ${dut1} | permit | ${table_idx} | ip4 | dst | 20.20.20.2
| | And Vpp Enable Input Acl Interface
| | ... | ${dut1} | ${dut1_if1} | ip4 | ${table_idx}
| | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3
-| | ... | ${dut2} | ip4 | dst
+| | ... | ${dut2} | ip4 | dst | 10.10.10.2
| | And Vpp Configures Classify Session L3
-| | ... | ${dut2} | permit | ${table_idx} | ${skip_n} | ${match_n}
-| | ... | ip4 | dst | 10.10.10.2
+| | ... | ${dut2} | permit | ${table_idx} | ip4 | dst | 10.10.10.2
| | And Vpp Enable Input Acl Interface
| | ... | ${dut2} | ${dut2_if2} | ip4 | ${table_idx}
| | Then Find NDR and PDR intervals using optimized search