diff options
Diffstat (limited to 'tests')
| -rw-r--r-- | tests/func/honeycomb/081_ietf_acl_traffic.robot | 226 |
1 files changed, 158 insertions, 68 deletions
diff --git a/tests/func/honeycomb/081_ietf_acl_traffic.robot b/tests/func/honeycomb/081_ietf_acl_traffic.robot index be6ea16947..93a0e70330 100644 --- a/tests/func/honeycomb/081_ietf_acl_traffic.robot +++ b/tests/func/honeycomb/081_ietf_acl_traffic.robot @@ -22,7 +22,9 @@ | ${acl_name_l2}= | acl_l2 | ${acl_name_l3_ip4}= | acl_l3_ip4 | ${acl_name_l3_ip6}= | acl_l3_ip6 +| ${acl_name_l4}= | acl_l4 | ${acl_name_mixed}= | acl_mixed +| ${acl_name_multirule}= | acl_multirule *** Settings *** | Resource | resources/libraries/robot/default.robot @@ -47,7 +49,7 @@ | Force Tags | Honeycomb_sanity *** Test Cases *** -| TC01: Honeycomb can configure L2 ACL MAC filtering through IETF-ACL node +| TC01: L2 ACL MAC filtering through IETF-ACL node | | [Documentation] | | ... | [Top] TG=DUT1=TG. | | ... | [Enc] Eth-IPv4-TCP. @@ -57,33 +59,69 @@ | | ... | using different MACs. Receive all packets except those with\ | | ... | MACs in the filtered ranges. | | [Teardown] | Run Keywords -| | ... | Clear IETF-ACL settings | ${node} | ${dut_to_tg_if1} | AND -| | ... | Show Packet Trace on All DUTs | ${nodes} | AND -| | ... | Honeycomb removes all bridge domains +| | ... | Clear IETF-ACL Settings | ${node} | ${dut_to_tg_if1} | AND +| | ... | Show Packet Trace On All DUTs | ${nodes} | AND +| | ... | Honeycomb Removes All Bridge Domains | | ... | ${node} | ${dut_to_tg_if1} | ${dut_to_tg_if2} -| | Given Setup interfaces and bridge domain for ietf-ACL test +| | Given Setup Interfaces And Bridge Domain For IETF-ACL Test | | ... | L2 | ${acl_name_l2} -| | When Honeycomb creates ACL chain through IETF node +| | When Honeycomb Creates ACL Chain Through IETF Node | | ... | ${dut_node} | ${acl_name_l2} | L2 | ${acl_settings} -| | And Honeycomb assigns IETF-ACL chain to interface +| | And Honeycomb Assigns IETF-ACL Chain To Interface | | ... | ${dut_node} | ${dut_to_tg_if1} | L2 | ingress | ${acl_name_l2} | | ... | permit -| | Then Send TCP or UDP packet | ${tg_node} | ${src_ip} | ${dst_ip} +| | Then Send TCP Or UDP Packet | ${tg_node} | ${src_ip} | ${dst_ip} | | ... | ${tg_to_dut_if1} | ${src_mac} | | ... | ${tg_to_dut_if2} | ${dst_mac} | | ... | TCP | ${src_port} | ${dst_port} -| | And Run keyword and expect error | TCP/UDP Rx timeout -| | ... | Send TCP or UDP packet | ${tg_node} | ${src_ip} | ${dst_ip} +| | And Run Keyword And Expect Error | TCP/UDP Rx timeout +| | ... | Send TCP Or UDP Packet | ${tg_node} | ${src_ip} | ${dst_ip} | | ... | ${tg_to_dut_if1} | ${classify_src} | | ... | ${tg_to_dut_if2} | ${classify_dst} | | ... | TCP | ${src_port} | ${dst_port} -| | And Run keyword and expect error | TCP/UDP Rx timeout -| | ... | Send TCP or UDP packet | ${tg_node} | ${src_ip} | ${dst_ip} +| | And Run Keyword And Expect Error | TCP/UDP Rx timeout +| | ... | Send TCP Or UDP Packet | ${tg_node} | ${src_ip} | ${dst_ip} | | ... | ${tg_to_dut_if1} | ${classify_src2} | | ... | ${tg_to_dut_if2} | ${classify_dst2} | | ... | TCP | ${src_port} | ${dst_port} -| TC02: Honeycomb can configure L3 ACL IPv4 filtering through IETF-ACL node +| TC02: L2 ACL MAC filtering through IETF-ACL node on egress interface +| | [Documentation] +| | ... | [Top] TG=DUT1=TG. +| | ... | [Enc] Eth-IPv4-TCP. +| | ... | [Cfg] (Using Honeycomb API) On DUT1 bridge both interfaces to TG\ +| | ... | and configure L2 MAC ACL on egress interface. +| | ... | [Ver] Send simple TCP packets from one TG interface to the other,\ +| | ... | using different MACs. Receive all packets except those with\ +| | ... | MACs in the filtered ranges. +| | [Teardown] | Run Keywords +| | ... | Clear IETF-ACL Settings | ${node} | ${dut_to_tg_if2} | AND +| | ... | Show Packet Trace On All DUTs | ${nodes} | AND +| | ... | Honeycomb Removes All Bridge Domains +| | ... | ${node} | ${dut_to_tg_if1} | ${dut_to_tg_if2} +| | Given Setup Interfaces And Bridge Domain For IETF-ACL Test +| | ... | L2 | ${acl_name_l2} +| | When Honeycomb Creates ACL Chain Through IETF Node +| | ... | ${dut_node} | ${acl_name_l2} | L2 | ${acl_settings} +| | And Honeycomb Assigns IETF-ACL Chain To Interface +| | ... | ${dut_node} | ${dut_to_tg_if2} | L2 | egress | ${acl_name_l2} +| | ... | permit +| | Then Send TCP Or UDP Packet | ${tg_node} | ${src_ip} | ${dst_ip} +| | ... | ${tg_to_dut_if1} | ${src_mac} +| | ... | ${tg_to_dut_if2} | ${dst_mac} +| | ... | TCP | ${src_port} | ${dst_port} +| | And Run Keyword And Expect Error | TCP/UDP Rx timeout +| | ... | Send TCP Or UDP Packet | ${tg_node} | ${src_ip} | ${dst_ip} +| | ... | ${tg_to_dut_if1} | ${classify_src} +| | ... | ${tg_to_dut_if2} | ${classify_dst} +| | ... | TCP | ${src_port} | ${dst_port} +| | And Run Keyword And Expect Error | TCP/UDP Rx timeout +| | ... | Send TCP Or UDP Packet | ${tg_node} | ${src_ip} | ${dst_ip} +| | ... | ${tg_to_dut_if1} | ${classify_src2} +| | ... | ${tg_to_dut_if2} | ${classify_dst2} +| | ... | TCP | ${src_port} | ${dst_port} + +| TC03: L3 ACL IPv4 filtering through IETF-ACL node | | [Documentation] | | ... | [Top] TG=DUT1=TG. | | ... | [Enc] Eth-IPv4-TCP. @@ -93,31 +131,31 @@ | | ... | [Ver] Send simple TCP and UDP packets from one TG interface\ | | ... | to the other, using different IPv4 IPs. Receive all packets except\ | | ... | those with IPs in the filtered ranges and UDP protocol payload. -| | Given Setup interface IPs and routes for IPv4 ietf-ACL test +| | Given Setup Interface IPs And Routes For IPv4 IETF-ACL Test | | ... | L3_IP4 | ${acl_name_l3_ip4} -| | When Honeycomb creates ACL chain through IETF node +| | When Honeycomb Creates ACL Chain Through IETF Node | | ... | ${dut_node} | ${acl_name_l3_ip4} | L3_IP4 | ${acl_settings} -| | And Honeycomb assigns IETF-ACL chain to interface +| | And Honeycomb Assigns IETF-ACL Chain To Interface | | ... | ${dut_node} | ${dut_to_tg_if1} | L3_IP4 | ingress | ${acl_name_l3_ip4} | | ... | permit -| | Then Send TCP or UDP packet | ${tg_node} +| | Then Send TCP Or UDP Packet | ${tg_node} | | ... | ${src_ip} | ${dst_ip} | | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} | | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} | | ... | UDP | ${src_port} | ${dst_port} -| | And Send TCP or UDP packet | ${tg_node} +| | And Send TCP Or UDP Packet | ${tg_node} | | ... | ${classify_src} | ${classify_dst} | | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} | | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} | | ... | TCP | ${src_port} | ${dst_port} -| | And Run keyword and expect error | TCP/UDP Rx timeout -| | ... | Send TCP or UDP packet | ${tg_node} +| | And Run Keyword And Expect Error | TCP/UDP Rx timeout +| | ... | Send TCP Or UDP Packet | ${tg_node} | | ... | ${classify_src} | ${classify_dst} | | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} | | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} | | ... | UDP | ${src_port} | ${dst_port} -| TC03: Honeycomb can configure L3 ACL IPv6 filtering through IETF-ACL node +| TC04: L3 ACL IPv6 filtering through IETF-ACL node | | [Documentation] | | ... | [Top] TG=DUT1=TG. | | ... | [Enc] Eth-IPv4-TCP. @@ -146,104 +184,156 @@ | | ... | ${gateway} | interface=${dut_to_tg_if2} | use_sw_index=False | | And VPP Route Add | ${node} | ${classify_dst_net} | ${prefix_length} | | ... | ${gateway} | interface=${dut_to_tg_if2} | use_sw_index=False -| | When Honeycomb creates ACL chain through IETF node +| | When Honeycomb Creates ACL Chain Through IETF Node | | ... | ${dut_node} | ${acl_name_l3_ip6} | L3_IP6 | ${acl_settings} -| | And Honeycomb assigns IETF-ACL chain to interface +| | And Honeycomb Assigns IETF-ACL Chain To Interface | | ... | ${dut_node} | ${dut_to_tg_if1} | L3_IP6 | ingress | ${acl_name_l3_ip6} | | ... | permit -| | Then Send TCP or UDP packet | ${tg_node} +| | Then Send TCP Or UDP Packet | ${tg_node} | | ... | ${src_ip} | ${dst_ip} | | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} | | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} | | ... | UDP | ${src_port} | ${dst_port} -| | And Send TCP or UDP packet | ${tg_node} +| | And Send TCP Or UDP Packet | ${tg_node} | | ... | ${classify_src} | ${classify_dst} | | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} | | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} | | ... | TCP | ${src_port} | ${dst_port} -| | And Run keyword and expect error | TCP/UDP Rx timeout -| | ... | Send TCP or UDP packet | ${tg_node} +| | And Run Keyword And Expect Error | TCP/UDP Rx timeout +| | ... | Send TCP Or UDP Packet | ${tg_node} | | ... | ${classify_src} | ${classify_dst} | | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} | | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} | | ... | UDP | ${src_port} | ${dst_port} -| TC04: Honeycomb can configure L2 and L3 ACL on L2-mode interface +| TC05: L4 ACL port filtering through IETF-ACL node +| | [Documentation] +| | ... | [Top] TG=DUT1=TG. +| | ... | [Enc] Eth-IPv4-TCP. +| | ... | [Cfg] (Using Honeycomb API) On DUT1 set IPv4 addresses on both\ +| | ... | interfaces to TG, add ARP entry and routes, and configure L4 port ACL\ +| | ... | on ingress interface with src/dst port ranges. +| | ... | [Ver] Send simple TCP and UDP packets from one TG interface\ +| | ... | to the other, using different ports. Receive all packets except\ +| | ... | those with ports in the filtered ranges. +| | Given Setup Interface IPs And Routes For IPv4 IETF-ACL Test +| | ... | L4 | ${acl_name_l4} +| | When Honeycomb Creates ACL Chain Through IETF Node +| | ... | ${dut_node} | ${acl_name_l4} | mixed | ${acl_settings} +| | And Honeycomb Assigns IETF-ACL Chain To Interface +| | ... | ${dut_node} | ${dut_to_tg_if1} | mixed | ingress | ${acl_name_l4} +| | ... | permit | L3 +| | Then Send TCP Or UDP Packet | ${tg_node} +| | ... | ${src_ip} | ${dst_ip} +| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} +| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} +| | ... | TCP | ${src_port} | ${dst_port} +| | And Run Keyword And Expect Error | TCP/UDP Rx timeout +| | ... | Send TCP Or UDP Packet | ${tg_node} +| | ... | ${src_ip} | ${dst_ip} +| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} +| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} +| | ... | TCP | ${classify_src} | ${classify_dst} + +| TC06: L2,L3 and L4 ACL together on L2-mode interface | | [Documentation] | | ... | [Top] TG=DUT1=TG. | | ... | [Enc] Eth-IPv4-TCP. | | ... | [Cfg] (Using Honeycomb API) On DUT1 bridge both interfaces to TG\ -| | ... | and configure L2 and L3 ACL on ingress interface\ -| | ... | with src/dst MAC, src/dst IP and protocol. +| | ... | and configure L2, L3 and L4 ACL on ingress interface\ +| | ... | with src/dst MAC, src/dst IP, protocol and src/dst port ranges. | | ... | [Ver] Send simple TCP and UDP packets from one TG interface\ -| | ... | to the other, using different MACs and IPv4 IPs. Receive all packets\ -| | ... | except those with MACs and IPs in the filtered ranges and UDP\ -| | ... | protocol payload. +| | ... | to the other, using different MACs, IPv4 IPs and ports. Receive\ +| | ... | all packets except those with MACs, IPs and ports in the filtered\ +| | ... | ranges and UDP protocol payload. | | [Teardown] | Run Keywords -| | ... | Clear IETF-ACL settings | ${node} | ${dut_to_tg_if1} | AND -| | ... | Show Packet Trace on All DUTs | ${nodes} | AND -| | ... | Honeycomb removes all bridge domains +| | ... | Clear IETF-ACL Settings | ${node} | ${dut_to_tg_if1} | AND +| | ... | Show Packet Trace On All DUTs | ${nodes} | AND +| | ... | Honeycomb Removes All Bridge Domains | | ... | ${node} | ${dut_to_tg_if1} | ${dut_to_tg_if2} -| | Given Setup interfaces and bridge domain for ietf-ACL test +| | Given Setup Interfaces And Bridge Domain For IETF-ACL Test | | ... | mixed | ${acl_name_mixed} -| | When Honeycomb creates ACL chain through IETF node +| | When Honeycomb Creates ACL Chain Through IETF Node | | ... | ${dut_node} | ${acl_name_mixed} | mixed | ${acl_settings} -| | And Honeycomb assigns IETF-ACL chain to interface +| | And Honeycomb Assigns IETF-ACL Chain To Interface | | ... | ${dut_node} | ${dut_to_tg_if1} | mixed | ingress | ${acl_name_mixed} | | ... | permit | L2 -| | Then Send TCP or UDP packet | ${tg_node} | ${src_ip} | ${dst_ip} +| | Then Send TCP Or UDP Packet | ${tg_node} | ${src_ip} | ${dst_ip} | | ... | ${tg_to_dut_if1} | ${classify_src_mac} | | ... | ${tg_to_dut_if2} | ${classify_dst_mac} | | ... | TCP | ${src_port} | ${dst_port} -| | And Send TCP or UDP packet | ${tg_node} -| | ... | ${classify_src_ip} | ${classify_dst_ip} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | UDP | ${src_port} | ${dst_port} -| | And Run keyword and expect error | TCP/UDP Rx timeout -| | ... | Send TCP or UDP packet | ${tg_node} +| | And Run Keyword And Expect Error | TCP/UDP Rx timeout +| | ... | Send TCP Or UDP Packet | ${tg_node} | | ... | ${classify_src_ip} | ${classify_dst_ip} | | ... | ${tg_to_dut_if1} | ${classify_src_mac} | | ... | ${tg_to_dut_if2} | ${classify_dst_mac} -| | ... | UDP | ${src_port} | ${dst_port} +| | ... | UDP | ${classify_src_port} | ${classify_dst_port} -| TC05: Honeycomb can configure L2 and L3 ACL on L3-mode interface +| TC07: L2,L3 and L4 ACL together on L3-mode interface | | [Documentation] | | ... | [Top] TG=DUT1=TG. | | ... | [Enc] Eth-IPv4-TCP. | | ... | [Cfg] (Using Honeycomb API) On DUT1 set IPv4 addresses on both\ | | ... | interfaces to TG, add ARP entry and routes, and configure\ -| | ... | L2 and L3 ACL on ingress interface with src/dst MAC, src/dst IP\ -| | ... | and protocol. +| | ... | L2, L3 and L4 ACL on ingress interface with src/dst MAC, src/dst IP,\ +| | ... | protocol and src/dst port ranges. | | ... | [Ver] Send simple TCP and UDP packets from one TG interface\ -| | ... | to the other, using different MACs and IPv4 IPs. Receive all packets\ -| | ... | except those with MACs and IPs in the filtered ranges and UDP\ -| | ... | protocol payload. -| | Setup interface IPs and routes for IPv4 ietf-ACL test +| | ... | to the other, using different MACs, IPv4 IPs and ports. Receive\ +| | ... | all packets except those with MACs, IPs and ports in the filtered\ +| | ... | ranges and UDP protocol payload. +| | Setup Interface IPs And Routes For IPv4 IETF-ACL Test | | ... | mixed | ${acl_name_mixed} -| | When Honeycomb creates ACL chain through IETF node +| | When Honeycomb Creates ACL Chain Through IETF Node | | ... | ${dut_node} | ${acl_name_mixed} | mixed | ${acl_settings} -| | And Honeycomb assigns IETF-ACL chain to interface +| | And Honeycomb Assigns IETF-ACL Chain To Interface | | ... | ${dut_node} | ${dut_to_tg_if1} | mixed | ingress | ${acl_name_mixed} | | ... | permit | L3 -| | Then Send TCP or UDP packet | ${tg_node} | ${src_ip} | ${dst_ip} +| | Then Send TCP Or UDP Packet | ${tg_node} | ${src_ip} | ${dst_ip} | | ... | ${tg_to_dut_if1} | ${classify_src_mac} | | ... | ${tg_to_dut_if2} | ${classify_dst_mac} | | ... | TCP | ${src_port} | ${dst_port} -| | And Send TCP or UDP packet | ${tg_node} -| | ... | ${classify_src_ip} | ${classify_dst_ip} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | UDP | ${src_port} | ${dst_port} -| | And Run keyword and expect error | TCP/UDP Rx timeout -| | ... | Send TCP or UDP packet | ${tg_node} +| | And Run Keyword And Expect Error | TCP/UDP Rx timeout +| | ... | Send TCP Or UDP Packet | ${tg_node} | | ... | ${classify_src_ip} | ${classify_dst_ip} | | ... | ${tg_to_dut_if1} | ${classify_src_mac} | | ... | ${tg_to_dut_if2} | ${classify_dst_mac} -| | ... | UDP | ${src_port} | ${dst_port} +| | ... | UDP | ${classify_src_port} | ${classify_dst_port} -# TODO: Test case for L4 ACL port-based filtering -# TODO: Test case for multiple classify rules and rule ordering +| TC08: Multiple classify rules in one ACL +| | [Documentation] +| | ... | [Top] TG=DUT1=TG. +| | ... | [Enc] Eth-IPv4-TCP. +| | ... | [Cfg] (Using Honeycomb API) On DUT1 bridge both interfaces to TG\ +| | ... | and configure a series of L2 MAC ACL rules on ingress interface. +| | ... | [Ver] Send simple TCP packets from one TG interface to the other,\ +| | ... | using different MACs. Receive all packets except those with\ +| | ... | MACs in the ranges filtered by any rule. +| | [Teardown] | Run Keywords +| | ... | Clear IETF-ACL Settings | ${node} | ${dut_to_tg_if1} | AND +| | ... | Show Packet Trace On All DUTs | ${nodes} | AND +| | ... | Honeycomb Removes All Bridge Domains +| | ... | ${node} | ${dut_to_tg_if1} | ${dut_to_tg_if2} +| | Given Setup Interfaces And Bridge Domain For IETF-ACL Test +| | ... | multirule | ${acl_name_multirule} +| | When Honeycomb Creates ACL Chain Through IETF Node +| | ... | ${dut_node} | ${acl_name_multirule} | L2 | ${acl_settings} +| | And Honeycomb Assigns IETF-ACL Chain To Interface +| | ... | ${dut_node} | ${dut_to_tg_if1} | L2 | ingress | ${acl_name_multirule} +| | ... | permit +| | Then Send TCP Or UDP Packet | ${tg_node} | ${src_ip} | ${dst_ip} +| | ... | ${tg_to_dut_if1} | ${src_mac} +| | ... | ${tg_to_dut_if2} | ${dst_mac} +| | ... | TCP | ${src_port} | ${dst_port} +| | And Run Keyword And Expect Error | TCP/UDP Rx timeout +| | ... | Send TCP Or UDP Packet | ${tg_node} | ${src_ip} | ${dst_ip} +| | ... | ${tg_to_dut_if1} | ${classify_src} +| | ... | ${tg_to_dut_if2} | ${classify_dst} +| | ... | TCP | ${src_port} | ${dst_port} +| | And Run Keyword And Expect Error | TCP/UDP Rx timeout +| | ... | Send TCP Or UDP Packet | ${tg_node} | ${src_ip} | ${dst_ip} +| | ... | ${tg_to_dut_if1} | ${classify_src2} +| | ... | ${tg_to_dut_if2} | ${classify_dst2} +| | ... | TCP | ${src_port} | ${dst_port} *** Keywords *** | Setup interface IPs and routes for IPv4 ietf-ACL test |