aboutsummaryrefslogtreecommitdiffstats
path: root/resources/api/vpp
AgeCommit message (Collapse)AuthorFilesLines
2023-08-17feat(swasync): switch to polling modeVratko Polak1-0/+379
Performance of adaptive mode is bad (different bug), keep continuity of ipsec swasync tests (when VPP allows). As 23.06-release does not have the new API message, the new CSIT code needs to be more careful around CRC checking. + Add new crc collection with the new API call used. + Also keep the old collection so older VPP does not fail. + Document how papi executor works with VPP without a message. + Prevent CRC checker from raising bodus errors with old VPP. Change-Id: I9ff933a8a9558289d22d55526905d63e7894378c Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2023-07-14feat(crc): bump messages for cycle after 2306Vratko Polak1-8/+115
The supported VPP code is 380c62d7040bf285d449f1d05692141c40089470 which is the latest commit before stable/2306 diverged from master. + Separate messages into blocks with paths to .api sources. + Prepare memif for use_dma (currently always false). + Use srv6 test teardown action in srv6 device tests. - Do not use sr_policy_add_v2 from 37258 yet. - Leave a TODO to do it eventually, for now inputs are too different. - Do not use index based policer calls from 37873. - The policer_add_del is not deprecated yet and inputs are different. Change-Id: I350138f09542ec12ce4bec140203175940ccf9d4 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2023-04-18fix(api): bump messages to 23.02 usageVratko Polak1-9/+9
New features are generally not used in CSIT, but some edits in code are needed to continue using defaults. 3 messages have newer versions: * bridge_domain_add_del_v2 * ipsec_spd_entry_add_del_v2 * lb_add_del_vip_v2 Change-Id: Ibcc089ccbf933c019b5e7188c06ef229e68d39a8 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2022-09-30Add wireguard multiple tunnels test suitesYulong Pei1-0/+2
Signed-off-by: Yulong Pei <yulong.pei@intel.com> Change-Id: I7abd546e67fdbe481b204bb6a1ec7e9c654dcdae
2022-08-18feat(papi): use newer API messagesVratko Polak1-20/+15
Updated for what is available in (last common ancestor of) 2206. (So newer messages such as ipsec_spd_entry_add_del_v2 are not used yet.) + Removed messgages documented as unused. - Did not check if more become unused. + Restored alphabetical order. Change-Id: I4191c3f8629106f52ce387d03f30f9f973ffbefe Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2022-06-09Add Test Suite for VPP WireGuardCui,Cheng1-1/+5
Signed-off-by: Cui,Cheng <cheng.cui@intel.com> Change-Id: I71e257e5f16a887a40ff83d782a9ebdee9d05c34 Signed-off-by: Cui,Cheng <cheng.cui@intel.com>
2022-05-18Add gtpu flow offload test suiteYulong Pei1-0/+2
The implementation of GTPU offload rx is to use ip4_gtpu flow MARK action of NIC and vpp flow REDIRECT_TO_NODE and BUFFER_ADVANCE fuction to direct received gtpu flow to gtpu4-flow-input graph node, skipped ethernet-input, ip4-input, ip4-lookup, ip4-local, ip4-udp-lookup normal graph node processing. Verified on 3n-clx and Intel E810 NIC environment, single core with 64B packet, performance improve ~33% that compare with pure software way. Signed-off-by: xinfeng zhao <xinfengx.zhao@intel.com> Signed-off-by: Yulong Pei <yulong.pei@intel.com> Change-Id: I2af4589448bdb1729e4ce206a8cf3a1239c61af8 Signed-off-by: Yulong Pei <yulong.pei@intel.com>
2022-02-16chore(api): use the non-deprecated nat init callVratko Polak1-3/+3
Change-Id: Ic1949c46aa339e66a47a0ebbc428499c5cf9305e Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2021-10-08Add flow test suitesxinfeng zhao1-0/+8
The comms DDP package needs to be installed to support all flow protocols Signed-off-by: xinfeng zhao <xinfengx.zhao@intel.com> Change-Id: I6ab1bd8beb9edb8c9889a0ed9a999080ca3cef3d
2021-09-28CRC: Sort messages and update the rest of commentsVratko Polak1-26/+19
Change-Id: Icd6510bfeb9cbad9eb47da5bed843d8455edc9f6 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2021-09-27CRC: trailing comments updatedViliam Luc1-97/+92
Change-Id: I54fd3116bd2191ab6870e1bba6b3b24f8117b899 Signed-off-by: Viliam Luc <vluc@cisco.com>
2021-09-14API: Use newer message versionsVratko Polak1-11/+11
Based on latest common ancestor of master and stable/2106: 1372178e0e674143bfec14b17050d5e92e4fcf1a Only ipsec_sad_entry_add_del_v3 needs non-trivial argument edits. Change-Id: I813367292a830e5a1fac765e9f24057b6b0192ee Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2021-06-10Add gtpu sw performance test casesxinfeng zhao1-0/+2
Signed-off-by: xinfeng zhao <xinfengx.zhao@intel.com> Reviewed-by: Yulong Pei <yulong.pei@intel.com> Change-Id: Ibe4420529192559a3cdbb84e0a67859750a9e0d5
2021-06-04Performance: Add AF_XDP testspmikus1-0/+2
- enabling for fortville, columbiaville - enabling experimental for mlx Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I1b7ceb54769f4a0089ac7309350499e60c5cca0a
2021-05-05CRC: Remove the collection from before 30345Vratko Polak1-266/+2
Use current stable VPP version as collection label. Change-Id: I10552ca78f7496ccb94d4f05ff9af17df682acce Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2021-04-20CRC: Add collection for 30345Vratko Polak1-0/+264
30345 only afects CRC values, not what the messages do. Change-Id: I83b64a30d56e54164a5b3150101f702a9f2fba34 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2021-02-19Add test suites for crypto sw scheduler engineYulong Pei1-0/+2
This patch is to add test suites for vpp plugin crypto_sw_scheduler, IPsec sync mode is to do crypto and packet forward work in same worker cores, crypto_sw_scheduler can schedule crypto work to other async crypto cores to improve whole crypto processing capability. This test suites configure fixed 1 rx queues per port, then measure IPsec performance with 1, 2, 3 crypto cores. This patchset include 1, 2, 4, 8 ipsec tunnels test cases. +Vratko help to change to count total physical cores instead of previous only count crypto cores in test cases. Change-Id: I0e67182e3d13273890a23703d838101900e25126 Signed-off-by: Yulong Pei <yulong.pei@intel.com> Signed-off-by: Vratko Polak <vrpolak@cisco.com> Signed-off-by: pmikus <pmikus@cisco.com>
2021-02-19API: Use newer messagesVratko Polak1-6/+4
The mesages are the newest present in last common ancestor of master and rls2101 (so not yet ipsec_sad_entry_add_del_v3). Added a TODO for the RDMA create improvement, to be implemented in a separate change. Change-Id: I94bcd2f1bc109fb995c4dd6df44f8928865634f5 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2021-01-04API: deprecated COP APIsTomas Alexy1-5/+5
Signed-off-by: Tomas Alexy <tomas.alexy@pantheon.tech> Change-Id: Ifb97088a26f3c2ab2ecee28ed43e6e957a844c64
2020-12-18API: deprecated bond APIsJan Gelety1-10/+10
Jira: CSIT-1597 Change-Id: I77b746584851331d46eca1caafd4468d18f1e78d Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-12-11API: deprecated nsim APIsJan Gelety1-2/+2
Jira: CSIT-1597 Change-Id: Ice342d6cb7cd244d712c42a3d468c851c79739f4 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-12-16API: deprecated IPSEC APIsJan Gelety1-2/+8
Jira: CSIT-1597 + add ipsec_sa tear down action Change-Id: I4d1e6f26c14e61e8ddc6f29fbf5528a034c84eb0 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-12-03vpp-device: GENEVE tunnel test, l3 modeJan Gelety1-0/+8
Jira: CSIT-1769 Change-Id: I98510cd8e627d7347f77d0032b7bac28f2e36c61 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-12-08Revert "vpp-device: GENEVE tunnel test, l3 mode"Peter Mikus1-8/+0
This reverts commit a9f54ca5080aeef17686f300a6807bf9b46b7c90. Reason for revert: DO NOT MERGE BROKEN TESTS!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! https://logs.fd.io/production/vex-yul-rot-jenkins-1/csit-vpp-device-master-ubuntu1804-1n-skx/9918/archives/log.html.gz Change-Id: I2ce2970a43e5dd7487eeb54d1ccbb149e06cf8fa Signed-off-by: pmikus <pmikus@cisco.com>
2020-12-03vpp-device: GENEVE tunnel test, l3 modeJan Gelety1-0/+8
Jira: CSIT-1769 Change-Id: I0ab906966f760b809b8431530c010a8f0835d62c Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-12-02API: deprecated NAT APIsJan Gelety1-2/+2
Jira: CSIT-1597 Change-Id: Ib48d20ba087bc9828970c3acc081ac6e4447c20c Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-10-29Support existing test types with ASTFVratko Polak1-2/+2
+ Add UDP_CPS, TCP_CPS, UDP_PPS and TCP_PPS suites. + Update existing cps traffic profiles. + Add missing traffic profiles. + UDP: + Single burst of 32 packets was confirmed as safe enough for TRex. + Maybe 64 could work, but not enough testing for that. + Multiple bursts have lead to reduced TRex performance, as overlaping bursts (from different client instances) tend to fill up the buffers. + TCP: + Data size set to 11111 bytes, completely arbitrarily. + Results look reasonable, so I have kept that. - MSS not set at all - No tested support for frame size other than 64B. - Frame size does not even factor into TCP profiles. + So other frame sizes are skipped in autogen. + Update tags in related suites. - HOSTS_{n} and SRC_USER_{n} should be unified. - Questionable clarification on difference between IP4BASE and SCALE. + Add NAT state resetters to tests that need them. + Resetter is called (if set) before each measurement. + If ramp-up is detected, resetter is not set. + Rename "mult" argument to "multiplier". + Abstracted from packets to transactions. + Transaction corresponds to profile. + TRex multiplier argument sets target rate in transactions per second. + The familiar STL traffic: + Bidirectional is considered to be 2 packets per transaction. + Unidirectional is considered to be 1 packet per transaction. + The newer ASTF traffic: + 4 subtypes, each has different number of packets per transaction. + For max rate computation: + Packets in the more numerous direction are considered. + Rely on TRex reported traffic duration for ASTF: + Use the server side value. - Client side value is higher by an overhead. - TRex is not sending traffic during that time. + Remove delays from traffic profiles. - Those delays would increase the reprted traffic time. + Support for scale lmited trials. + Only for ASTF profiles, each ASTF profile has limited scale. + Scale defined in suite variables. + For TRex to send all transactions provided duration value is ignored. + The appropriate value is computed in TrafficGenerator. + An ad-hoc time constant is added to match the TRex client side time overhead. + The profile driver receives the computed duration. + Measurement for PLRsearch add a sleep if the computed duration is smaller. + Alternative argument for search algos if scale is limited. + Both need higher timeout to accomodate big scales. + MLRsearch can afford fewer phases. + Added a parameter to optionally shorten the duration. + Use short duration for runtime stats trial and failure stats trial. + Use very large keepalive values in udp profiles to avoid ka packets. + No polling in ASTF profile driver. - Polling could eliminate the time overhead value. + But polling proved to introduce some loss, affecting the results. + Handle duration stretching in ASTF by stopping traffic. + The stop has several steps so that: + The traffic is really stopped entirely. + Late packets do not count (maybe as errors). + Stats are preserved to read for results (and cleared afterwards). + Several quantities added to ReceiveRateMeasurement: + Original target duration is preserved (algos need that). + Input estimate (tps) for early search iterations. + Output estimate (maybe pps) for MRR output. + Strict result (unsent counts as loss) for NDR. + Use L2 counters (opackets, ipackets) where possible. - TRex has trouble processing packets for the L7 ones at high loads. + Remove warmup from profile drivers and keywords. + Suites should call "Send ramp-up traffic" explicitly if needed. + Added parsing for few more counters. + Both to use in formulas or just for debug purposes. - Only 64B cases in autogen, framesize support to be added later. + Latency streams during search can be enabled via PERF_USE_LATENCY env var. + MLRsearch improvments: + Rename argument names to min_rate and max_rate. + Use relative receive rate in initial phase. + PLRsearch improvements: + Careful computation when output (pps) does not match input (tps). + Use geometric distribution (instead of Poisson). + Helps agains math errors. + This should improve estimate stability. - But in practice big losses still lead to significant jumps. + Traffic generator improvements: + send_traffic_on_tg now calls the full set_rate_provider_defaults. + _send_traffic_on_tg_internal for the logic without provider defaults. + As the internal function is re-used by measure() without affecting defaults. + Move _parse_traffic_results just before get_measurement_result. + As the latter uses fields set bu the former, it is now easier to read. + Multiple sources for approximate duration. + Tried from more precise to more available. + Includes logic for _pps tests (added in later change). + Move explicit type conversions to earlier occurences. + Profile driver output field uses semicolons to simplify parsing. + Performance Robot lib file split to several smaller ones. + performance_actions.robot: + Hosts Additional Statistics Action For * keywords. + performance_display.robot: + Hosts keyword for displaying and verifying results. + Change test message to use the correct unit (pps or cps). + performance_limits.robot renamed to performance_vars.robot + Added many keywords, mostly for accessing test variables. + Moved variables for Policer into a new keyword there. + Some keywords need sophisticated logic. - Other are basically Get Variable Value. + But in future more logic can be added, without editing callers. + Documentation for the new keywords acts as a documentation for test variables. + performance_utils.robot has the rest. + Eliminated arguments if the value is in test variable. + Small improvements to documentation. - Still not enough cleanup with respect to arguments and test variables. + Keywords are sorted alphabetically now in each one. + Suites: + Unified variables table: + No colons in comments. + ${n_hosts}, ${n_ports} and use them instead hardcoded numbers. + Add -cps to existing cps suite names. + Remove "trial data overwrite". + Compute max rate as in STL suites. + Each NAT suite has ip4base suite to compare results to. - Those act as indirect TRex calibration. - VPP does not lose packets in those. + Latency in ASTF suites is disabled hard. - As we do not support latency in ASTF profiles yet. + Unidirectional tests governed by suite variable, not an argument. + Write long argument lists vertically. + Prefer to use argument names. + In Python, also the last argument is followed by comma. + It makes renaming and reordering easier. + Similarly applies to prints with long lists of values. + A TODO to update api crc file comments. Change-Id: I84729355edbec051298a9de1162107f88ff5737d Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2020-10-23CSIT-1597 NAT44 API: dynamic configJan Gelety1-2/+4
- cover API changes in VPP: https://gerrit.fd.io/r/c/vpp/+/29463 - update vpp stable to version 21.01-rc0~283-g5f4f2081c Change-Id: I079c10e4537448c3b078f22c3fe4ed266a5e2e2c Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-10-19Tests: Remove GBPpmikus1-14/+0
- Specs - Tests - Library - TODO: PAL Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I8890940d56c7a9924d4a5f9365b6bb881610db14
2020-09-14Update of VPP_STABLE_VER filesJan Gelety1-267/+2
- use new vpp ref build - ubuntu 18.04: 21.01-rc0~170-g83143710e - use new vpp ref build - centos7: 21.01-rc0~170_g8314371~b72 Change-Id: I57ca5fceb64309ab645cead1a1b22fd0db61b7e4 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-09-11API: Add collection for 29037/3Jan Gelety1-0/+265
Change-Id: I98f85a76e24fc471bee520bdf03e4252e81675d0 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-09-11Add ipsec async mode performance test casesYulong Pei1-0/+2
In VPP 20.05, vpp added async crypto engine that support to use QAT hardware to do encryption and decryption, vnet/ipsec enabled async mode to use async crypto engine. Current async crypto engine also use dpdk_cryptodev as async handlers, in the future it may add other native QAT driver as async handlers. Note that async crypto engine is to support vnet/ipsec, it is different with current existing dpdk backend which itself has ESP implementation in plugins/dpdk/ipsec. Change-Id: I4e6eaa7ca1eddb8b1c45212de0684fb26907119b Signed-off-by: Yulong Pei <yulong.pei@intel.com>
2020-09-07VPP-DEV API COV: Add NAT44-ED testsJan Gelety1-20/+20
Jira: CSIT-1755 Change-Id: I34baa22a49f44da3fa80d91fa2f4132c982fe610 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-08-09job_specs: use test tag ethip4udp-snat44det-h1-p1-s1 not ethip4udp-ip4base-nat44Jan Gelety1-1/+1
Change-Id: Idb7b415995f0a3474e379b0c023f64a96e886a55 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-08-08Fix: NAT44 deterministic moved to separate det44 pluginJan Gelety1-2/+11
- align CSIT code with VPP code changes for NAT44 deterministic (DET44) feature - align test names according to snat44ed tests - remove obsolete 3-node nat tests - remove 2n1l-10ge2p1x710-ethip4udp-snat44det-h1048576-p63-s66060288 tests (not enough memory for such high number of sessions) Change-Id: I9a22b99b4cfa56d18e9c7ef9c58296e202567d42 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-08-07Perf: NAT44 endpoint-dependent mode - udp, part IJan Gelety1-0/+16
- continuation of https://gerrit.fd.io/r/c/csit/+/26898 as there was reached limit of changes (1000) Jira: CSIT-1711 - udp synthetic profiles w/o data packets - udp cps perf tests, phase I (no special "search cps" KW) Part I means that we are using MRR tests to collect traffic data until there is ready new CPS test type with corresponding algorithm. Change-Id: I0d30feb9ecf1d0bff937152656f8eb422f831378 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-05-11CSIT-1597 API cleanup: ipsecJan Gelety1-240/+2
- cover API changes in VPP: https://gerrit.fd.io/r/c/vpp/+/26276 - update vpp stable to version 20.05-rc0~727 Change-Id: I39a0b5e60fac6a74aff2426f6a448c0e117ab647 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-04-29API: Add collection for 26276/7Jan Gelety1-0/+238
Change-Id: Ib65e3268e04fd4a7908e3e7c3c4217807f47a38b Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-04-28CSIT-1597 API cleanup: lispJan Gelety1-258/+2
- cover API changes in VPP: https://gerrit.fd.io/r/c/vpp/+/24663 - update vpp stable to version 20.05-rc0~637 - remove unused L1 and L2 lisp KWs Change-Id: I2672b6a375ad70c82f331dcc991c145e868108b9 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-04-28FIX: crc for create_vhost_user_ifJan Gelety1-1/+1
Change-Id: Ia43679c440da62ba44ad74d4c1eb9003b4ba0a63 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-04-28API: Add collection for 24663/6Jan Gelety1-0/+247
Change-Id: I009df88e0a315603b5f9d72eb1d1a729d1a8a4cd Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-04-02CSIT-1597 API cleanup: virtioJan Gelety1-247/+2
- cover API changes in VPP: https://gerrit.fd.io/r/c/vpp/+/26086 - update vpp stable to version 20.05-rc0~630 Change-Id: I3e3f00ba81e62f07c5d287300dfaff6cee18a1b4 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-03-30API: Add collection for 26086/8Jan Gelety1-0/+245
Change-Id: I41867bdb395a72733c1f616b981e952087b017ef Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-03-29Update of VPP_STABLE_VER filesJan Gelety1-249/+2
- use new vpp ref build - ubuntu 18.04: 20.05-rc0~532-g4fde4ae03 - use new vpp ref build - centos7: 20.05-rc0~532_g4fde4ae~b9253 Change-Id: If6a5478ca9b89050beae8f2dc4ce4e91b328aa21 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-03-29API: Add collection for 26256/7Jan Gelety1-4/+4
Change-Id: Ib5d8f9f0c8e8920a2d19e89d4d5518f4882ff32d Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-03-26API: Add collection for 25923/9Jan Gelety1-0/+247
Change-Id: I48da04747ffcbdb0b4452d11ee52204e966eb78b Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-03-27CSIT-1597 API cleanup: aclJan Gelety1-249/+2
- cover API changes in VPP: https://gerrit.fd.io/r/c/vpp/+/26184 - update vpp stable to version 20.05-rc0~424 Change-Id: Ie621a29db25755151bfee76a045a423fd1267ada Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-03-25API: Add collection for 25787/15Jan Gelety1-0/+247
Change-Id: Id33dbc63832848f951fc6478472e9d6dd614bff9 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-03-24CSIT-1597 API cleanup: srv6Jan Gelety1-249/+2
- cover API changes in VPP: https://gerrit.fd.io/r/c/vpp/+/25647 - update vpp stable to version 20.05-rc0~398 Change-Id: I5ebc84a702264b0b37e3886b48ec0713d174f880 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-03-23API: Add collection for 25647/3Jan Gelety1-0/+247
Change-Id: I01398df1d8d0274ff7aafc4cef0f431f19bef099 Signed-off-by: Jan Gelety <jgelety@cisco.com>