Age | Commit message (Collapse) | Author | Files | Lines |
|
Change-Id: I6202314a26fcba8cebc42eeebc3708732116caeb
Signed-off-by: Tibor Frank <tifrank@cisco.com>
|
|
- 2n-icx and
- 2n-spr
Change-Id: I6c1ebcd38081b86209a27fdf224923b236179ee4
Signed-off-by: Tibor Frank <tifrank@cisco.com>
|
|
We already deleted the job and the suites.
Change-Id: I0d9c4da14651884d6eeb3e200277b0ef5823df60
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
They are broken for more than two years
and they relied on CLIs that changed in VPP anyway.
Ticket: CSIT-1856
Change-Id: I0f278ff61a9da5e6040e08bf3e92049cb33c8a93
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
Change-Id: I1e874ad107dd961e886e544f7d7017086523f894
Signed-off-by: Tibor Frank <tifrank@cisco.com>
|
|
Change-Id: I46a6cf74da419e85b5b22a93a5703709a677a8ad
Signed-off-by: Tibor Frank <tifrank@cisco.com>
|
|
Added 9 common tests (only one for non-default NIC+driver),
4 specific to nodeness (ASTF for 2-node, IPsec for 3-node).
+ First round, we can add more tests when duration is stable.
- Left TODOs for possible improvements.
Change-Id: I4724e3a05af0dfbf2ca0c146f1bbd4665d9e0cf0
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
Signed-off-by: Peter Mikus <peter.mikus@protonmail.ch>
Change-Id: I48240d2df2ee7908d07da86a4e4da359178d0b9e
|
|
+ Add 4c 1518B tests to all memif 2n-spr coverage suites.
+ Add 1518B cases to iterative, so recently added DMA can be compared.
Change-Id: I589fd7efe30bb70e0255bb5c94fa23c2782a7860
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
Change-Id: I82ccfc639f7652d9a2ac248200ed2d49f93947dc
Signed-off-by: Tibor Frank <tifrank@cisco.com>
|
|
Change-Id: I6530519eaab2d09a187dddd803815888606ff17d
Signed-off-by: Tibor Frank <tifrank@cisco.com>
|
|
Signed-off-by: Peter Mikus <peter.mikus@protonmail.ch>
Change-Id: I84d9cf2892423e62b116b07982d3e87120b66271
|
|
Update the jobspec according to the current Arm policy:
1. Run most of the tests on cx6, crypto coverage being the most
important,
2. Match the cx6 ipv4 crypto coverage with x710 with the DPDK driver,
3. Run basic ipv4 and l2 tests with x710 with borh DPDK and native (avf)
drivers.
The above is the policy used in performance testing where time is a
major constraint. The same is true for functional testing to some
extent, so it makes sense to apply the same logic for choosing the tests.
There are 10 tests which are failing on cx6 without an identified
reason. They are disabled until we find the root cause and address it.
In the meantime, the tests are enabled for x710 with the DPDK driver:
ethip4-l2xcbase-eth-2memif-1dcr
ethip4-l2bdbasemaclrn-eth-2memif-1dcr
ethip4-l2bdbasemaclrn-eth-2tap
ethip4-l2bdbasemaclrn
ethip4-l2bdbasemaclrn-iacl1sf
ethip4-l2bdbasemaclrn-iacl1sl
ethip4-l2bdbasemaclrn-oacl1sf
ethip4-l2bdbasemaclrn-oacl1sl
ethip4-l2patch
ethip4-l2xcbase
When the cx6 issue has been resolved, these should be enabled for cx6
and disabled for x710, with the exception of ethip4-l2bdbasemaclrn,
which should be running on both.
Change-Id: Id48f450063e405b1faca57431676f91d62e829b9
Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
|
|
Change-Id: I9c9a6ecd6698cb58e7114543de54eb01549d4af0
Signed-off-by: Tibor Frank <tifrank@cisco.com>
|
|
Signed-off-by: Peter Mikus <peter.mikus@protonmail.ch>
Change-Id: Idca0738320b56196e98aeec3050312111a90609a
|
|
Signed-off-by: Peter Mikus <peter.mikus@protonmail.ch>
Change-Id: I3d2bb0408f15fd14989d1179d7f08710a3d86e67
|
|
Signed-off-by: Peter Mikus <peter.mikus@protonmail.ch>
Change-Id: I55421ca38df412950f4b2487e5db901a1850ed12
|
|
Signed-off-by: Peter Mikus <peter.mikus@protonmail.ch>
Change-Id: Ia713b9a0b962820b014bad3582bc095ec802380c
|
|
Signed-off-by: pmikus <peter.mikus@protonmail.ch>
Change-Id: I5276dbe7da224a677f7cfb07ef5b48326dd3e46f
|
|
Signed-off-by: Peter Mikus <peter.mikus@protonmail.ch>
Change-Id: I7f0eee8b94f65550eae68edeacf343ff982dd85a
|
|
Signed-off-by: pmikus <peter.mikus@protonmail.ch>
Change-Id: I0c333fe9954aaac7253064c33c9281e9246963f6
|
|
Change-Id: I0e4e4758b3abbfc2fe2e18200b85477293de218b
Signed-off-by: Naveen Joy <najoy@cisco.com>
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
Signed-off-by: Peter Mikus <peter.mikus@protonmail.ch>
Change-Id: I2b243aa33f41d267f83727f7747a9a28ffdd1c07
|
|
Signed-off-by: Peter Mikus <peter.mikus@protonmail.ch>
Change-Id: Ibddb430707510e2b3e803c892a7feeea6ab82ccd
|
|
Signed-off-by: pmikus <peter.mikus@protonmail.ch>
Change-Id: Ic4df3c303cd0758875dfcfdc3d0884a1b37448df
|
|
Signed-off-by: pmikus <peter.mikus@protonmail.ch>
Change-Id: Ia42f1bf77e2b88153922f3c0a387e60a9c63440b
|
|
Remove 4 tunnel flow cache test cases, as those don't benefit from flow
cache much.
Add mrr ipsec test cases for the XL710 Intel NIC to increase coverage.
Don't add ndrpdr for XL710, only add commented out counterparts to
align with the mrr list.
Also modify the existing flow cache configuration by adding the fast
path config as well. These are independent features, but the fast path
code added this dependency.
Change-Id: Ide88fd8c1abe96c577a86925dcc2dc4e63f897d4
Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
|
|
Also add IPsec 10000tnlhwasync int mode and 4tnlhwasync policy mode
test suites, in order to compare sw crypto and QAT crypto and IPsec
int mode and policy mode performance.
Signed-off-by: Yulong Pei <yulong.pei@intel.com>
Signed-off-by: xinfeng zhao <xinfengx.zhao@intel.com>
Change-Id: I0aed06a0c75c1a545720649d3561a0aa5a861db2
|
|
Signed-off-by: pmikus <peter.mikus@protonmail.ch>
Change-Id: I20e720302561f5f7d1f7a80a83548077a88025af
|
|
- 2n-spr, 2n-icx, 2n-clx
- fix 2n-clx
Change-Id: I4ad6da2c4c4a14c29f0f8f9b6af1cbc48f864795
Signed-off-by: Tibor Frank <tifrank@cisco.com>
|
|
Change-Id: I7ff782992ac6d5a9d585932df8986f3b457fc7e1
Signed-off-by: Tibor Frank <tifrank@cisco.com>
|
|
Change-Id: I3a96edf248dc6b0896cf68bdffbf9d40e73c8f61
Signed-off-by: Tibor Frank <tifrank@cisco.com>
|
|
Add ipsec reassembly test cases to bring in line with 3n-icx.
Add ipsec policy test cases with flow cache enabled for both inbound and
outbound traffic.
Remove GTPU hardware tests as the NIC doesn't support GTPU offload RX.
Change-Id: I7b18914f983d5974b390f995ec638a64b9bbccbb
Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
|
|
The lists prioritize the new Mellanox Connect-X6 NIC but retain a small
number of XL710 test cases to preserve at least some coverage.
They also add the avf driver for the XL710 NIC to ensure the driver is
tested in at a small amount.
Signed-off-by: Maciek Konstantynowicz <mkonstan@cisco.com>
Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
Change-Id: Id399d075d94344fdedbe4ab71d98a33fe37f913f
|
|
Signed-off-by: pmikus <peter.mikus@protonmail.ch>
Change-Id: Ie7b7401eb76e9f97f17d2f672a340ca617141388
|
|
Signed-off-by: pmikus <peter.mikus@protonmail.ch>
Change-Id: I8f8c97325cd2646415cfa62ef0436514b23fb701
|
|
A previous change has renamed the suites themselves,
so the replacement in jobspecs has to be done everywhere.
Fixes: cbdbc95ffc63a1eb2ffc170a979e11bfa0d4162a
Change-Id: I102e9b45d2e71b8cf99fb7d7dbdd19772de613c2
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
Signed-off-by: pmikus <peter.mikus@protonmail.ch>
Change-Id: Ic13b8cd3f2976c66d8956f0cee0784c3bae12a65
|
|
Signed-off-by: pmikus <peter.mikus@protonmail.ch>
Change-Id: Iea4c536a6e421efdaf493fb3cba0dde5abad162d
|
|
Signed-off-by: pmikus <peter.mikus@protonmail.ch>
Change-Id: Ia83a78299e279754352add230428102a8cee7772
|
|
Signed-off-by: pmikus <peter.mikus@protonmail.ch>
Change-Id: I74a23d1864a56c3906e08c70fd1d306d47b468da
|
|
+ Only to some 3node testbeds (alt, icx, snr and tsh).
+ Both MRR and NDRPDR.
+ 1518B only. All core counts.
+ Primary NIC only. Drv_vfio_pci only.
+ Only two suites:
+ ethip4ipsec1000tnlsw-ip4base-int-aes256gcm-reassembly
+ ethip4gtpusw-ip4base-reassembly
- This is expected to fail frequently due to VPP-2077.
+ Added to the end of crypto or ip4-tunnels section,
as the focus is on fragmentation and reassembly, not on encap/decap.
- Coverage not added here.
Change-Id: Ifca2a13e43b9d3b7ddc0eaa8fd6d3e1a56b90c7f
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
Change-Id: If7e00460fee4eee50479dc089c026670dcf3edf9
Signed-off-by: Tibor Frank <tifrank@cisco.com>
|
|
Signed-off-by: pmikus <peter.mikus@protonmail.ch>
Change-Id: I4704b18eb74847fa7c040a27b7296912d27d6ca5
|
|
Change-Id: I6ec27d787b59d4bc13b8c04f4217302cc3021581
Signed-off-by: pmikus <peter.mikus@protonmail.ch>
|
|
Change-Id: I947f961e665f5eb2f2f055a47cd0119011666b28
Signed-off-by: Tibor Frank <tifrank@cisco.com>
|
|
Change-Id: I56e62660053694e2b54467fed7c843ff5b201e1d
Signed-off-by: Tibor Frank <tifrank@cisco.com>
|
|
Signed-off-by: pmikus <peter.mikus@protonmail.ch>
Change-Id: Ib0e3be90cf5a15b24568a8bf05722d22e46fdd31
|
|
Signed-off-by: pmikus <peter.mikus@protonmail.ch>
Change-Id: I2e0feccef5c5b15b035490dfaf521c8c9a1795f8
|
|
- iterative, daily MRR, weekly NDRPDR:
- reduce* tests with xxv710 NIC for TBs:
- 2n-icx - reduction from 480 to 303 tests
- 3n-icx - reduction from 441 to 306 tests
- 2n-clx - reduction from 504 to 444 tests
- add tests tests with e810cq NIC for TB to ensure test coverage:
- 2n-clx
- coverage:
- add tests with e810cq NIC for TBs:
- 2n-icx
- 3n-icx
- 2n-clx
- reduce* tests with xxv710 NIC for TBs:
- 2n-icx
- 3n-icx
- 2n-clx
* Used the same approach as it was used for x710 some time ago:
- keep only base tests, prefer avf driver.
Signed-off-by: Tibor Frank <tifrank@cisco.com>
Change-Id: I63e950e1a5df18e5f7992aa7805b9b202ee75eb5
|