aboutsummaryrefslogtreecommitdiffstats
path: root/resources/libraries/python/autogen
AgeCommit message (Collapse)AuthorFilesLines
2024-05-31feat(jobspecs): Add more soak testsVratko Polak1-3/+0
+ Add l2xcbase. + Add 200k scale, both ip4 and ip6. + Test 200k and l2bdmaclearn also on: + Primary NIC with secondary driver. + Secondary NIC and its primary driver. + Add 1518B memif test cases, for 2n-spr also with DMA (including 64B). + This needed an edit in autogen. + Switch crypto tests to drv_vfio_pci as AVF has bad RSS on those. + Add two SRv6 cases to 3n-icx as it does not support hwasync crypto. + Repair name of UDP ASTF tests. Change-Id: I91e20ec80dc4984c55d39b5f5ad38f26b48da33e Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2024-03-14feat(tests): Fix scaling of 6p3nicoper-240318pmikus1-22/+10
Signed-off-by: Peter Mikus <peter.mikus@protonmail.ch> Change-Id: I84d9cf2892423e62b116b07982d3e87120b66271
2024-01-31fix(autogen): Do not set nic_code from nic_nameVratko Polak1-8/+1
This should fix some suites wrongly using nic_pfs=6. Change-Id: Ifb7bd24b9a2d1764634eea4a43b4509f16e03da2 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2023-12-11feat(job_specs): Add 200ge6p3cx7veat testspmikus1-15/+15
Signed-off-by: Peter Mikus <peter.mikus@protonmail.ch> Change-Id: Ia713b9a0b962820b014bad3582bc095ec802380c
2023-11-21fix(core): Suite generatorpmikus1-37/+36
Signed-off-by: Peter Mikus <peter.mikus@protonmail.ch> Change-Id: Ie47a2d736f90000741204bec144cbf2e4052bb2c
2023-11-03feat(tests): 6p3nic ip4 testsoper-231106pmikus1-0/+28
Signed-off-by: Peter Mikus <peter.mikus@protonmail.ch> Change-Id: I69ee305b25b9e05d2305cb82aba71ef6418780ab
2023-05-24feat(reassembly): add few suites for ip reassemblyVratko Polak1-3/+7
In tunneling scenarios, VPP needs to reassembly packet fragments before decapsulation. Conveniently, VPP also fragments the packets after encapsulation (at least for some encapsulation protocols) if they do not fit into MTU. So this change adds few suites, adapted from existing 3-node ones which additionally lower MTU on DUT1-DUT2 link. The intended packet size is 1518B. 64B packets will fit, and most of IMIX packets will also fit without fragmentation. VPP refuses to reassembly 9000B packets as they have too many fragments. + Add a keyword so suites need only one additional line of code. + Add new test tag REASSEMBLY for the added suites. + Tell autogen the one soak test case for reaseembly should be 1518B. - It is possible to increase fragment limit for 9000B, not done yet. - Ipsec policy suites are added but they should not be used. - VPP does fragmentation twice (before and after encapsulation). - VPP does not perform reassembly (only last fragment is decrypted). - TRex does not realize the packet from VPP is only a fragment. - The result is false pass with unfairly good performance. + Suites still included, to simplify verifying VPP fixes for the above. Change-Id: If33c60d767fea161d9e4ffabb8ded3d81c8f39ed Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2022-05-03feat(astf): Support framesizes for ASTFVratko Polak1-20/+44
- No support for IMIX. + Fix a bad bug in padding (most ASTF profiles had wrong frame sizes). + Fix a big typo in TCP PPS profiles (s->c was not data, just RST). + Control transaction size via ASTF_N_DATA_FRAMES env variable. - Default value 5 leads to transactions smaller than before. + It ensures transaction is one burst (per direction) even for jumbo. + Edit autogen to set supported frame sizes based on suite id. + Both TCP and UDP use the same values: + 64B for CPS (exact for UDP, nominal for TCP). + 100B, 1518B and 9000B for TPUT and PPS. - TCP TPUT achievable minimum is 70B. + Used 100B to leave room for possible IPv6 ASTF tests. + Separate function for code reused by vpp and trex tests. - I do not really like the new "copy and edit" approach added here. + But it is a quick edit, better autogen refactor is low priority. + Consider both established and transitory sessions as valid. - Mostly for compatibility with 2202 behavior and to avoid ramp-ups. - Assuming both session states have similar enough VPP CPU overhead. + Added a TODO to investigate and maybe reconsider later. + Update the state timeout value to 240s. + That is the default for TCP (for transitory state). - UDP could keep using 300s. + But I prefer UDP and TCP to behave as similarly as possible. + Use TRex tunables to get the exact frame size (for data packets). - It is not clear why the recipe for MSS has to be this complicated. + Move code away from profile init, as frame size is not known there. + Change internal profile API, so values related to MSS are passed. + Lower ramp-up rate for TCP TPUT tests. + Because without lower rate, jumbo fails on packet loss in ramp-up. + UDP TPUT ramp-up rate also lowered (just to keep suites more similar). + Distinguish one-direction and aggregated average frame size. + Update keyword documentation where the distiction matters. + One-direction is needed for turning bandwidth limit to TPS limit. + Aggregated is needed for correct NDRPDR bandwidth result value. - TCP TPUT will always be few percent below bidirectional maximum. + That is unavoidable, as one direction sends more control packets. + Add runtime consistency checks so future refactors are safer. + Fail if padding requested would be negative. + Fail if suite claims unexpected values for packets per transaction. + Edit the 4 types of ASTF profiles to keep them similar to each other. + Move UDP TPUT limit value from a field back to direct argument. + Stop pretending first UDP packet is not data. + Apply small improvements where convenient. + Replace "aggregate" with "aggregated" where possible. + To lower probability of any future typos in variable names. + Avoid calling Set Numeric Frame Sizes twice. + Code formatting, keyword documentation, code comments, ... + Add TODOs for less important code quality improvements. - Postpone updating of methodology pages to a subsequent change. Change-Id: I4b381e5210e69669f972326202fdcc5a2c9c923b Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2022-02-08feat(autogen): generate gso suites for all nicsVratko Polak1-15/+16
Previously, only x710 was generated, but ICX has xxv710 instead. Nic drivers (tap or vhost) remain hardcoded. Change-Id: I0ed3abb60258d74622995a8910f67ae4500ace56 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2021-11-02fix(autogen): VSAP testcase namingpmikus1-0/+1
Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: Ic6d440ffdf7e27c9e6ce65605178163652758f77
2021-10-28fix(Autogen): VSAP driver combinationspmikus1-8/+39
Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: Ieac8cd32009bebbd1a3324a81becfbf3abb814ab
2021-10-06docstring: Docstring warnings fixed.Viliam Luc1-1/+1
Change-Id: I8679c819b7c6ecd9e680bdc6edeafd2124def0b5 Signed-off-by: Viliam Luc <vluc@cisco.com>
2021-09-14back-to-back: add tg n2n suitesViliam Luc1-4/+16
Change-Id: I911e121475221fbf5449ed49dc6236caf13742b0 Signed-off-by: Viliam Luc <vluc@cisco.com>
2021-09-10back-to-back tests: add TG testsViliam Luc2-3/+106
Change-Id: I9d028294deb1e31b6d185deb1c7523e0226a0ada Signed-off-by: Viliam Luc <vluc@cisco.com>
2021-08-19vpp_device: Multiple NICs (suitegen)pmikus1-0/+75
Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I81958fbf6ef240d53a0fb8708ca882baf02f606c
2021-06-10FIX: Pylint reducepmikus3-5/+5
Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I909942dbb920df7f0fe15c0c92cda92c3cd8d8ad
2021-05-20perf: add TCP Nginx+LDPRELOAD suitesxizhanx2-2/+23
1. Suite steup add download nginx 2. Add nginx-1.14.2/1.15.0 ldp test suite 3. Add NginxUtils,NginxConfigGenerator method 4. Taskset the PID of nginx to the unused cores in VPP and these cores are under NIC's NUMA ID 5. cleanup add Kill Processes - nohup Signed-off-by: xizhanx <xix.zhang@intel.com> Change-Id: Idbf0e4ec3bf63e88281a8e3e34f52e00a6801c85 Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2021-02-19Add test suites for crypto sw scheduler engineYulong Pei1-1/+24
This patch is to add test suites for vpp plugin crypto_sw_scheduler, IPsec sync mode is to do crypto and packet forward work in same worker cores, crypto_sw_scheduler can schedule crypto work to other async crypto cores to improve whole crypto processing capability. This test suites configure fixed 1 rx queues per port, then measure IPsec performance with 1, 2, 3 crypto cores. This patchset include 1, 2, 4, 8 ipsec tunnels test cases. +Vratko help to change to count total physical cores instead of previous only count crypto cores in test cases. Change-Id: I0e67182e3d13273890a23703d838101900e25126 Signed-off-by: Yulong Pei <yulong.pei@intel.com> Signed-off-by: Vratko Polak <vrpolak@cisco.com> Signed-off-by: pmikus <pmikus@cisco.com>
2021-02-19FIX: Naming convention compliancepmikus1-1/+1
Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: Idcee623abbc5568fc6ca49113bc2ff8add179046
2021-02-05NAT44ed: Add pure throuhput bidir testsVratko Polak1-1/+5
+ With ramp-up, without reset, with session verification. + Uses the same profile as pps tests. + Ramp up duration is not specified, as duration is computed. + Timeout tracking with automated ramp-up. + Correct computation of next duration. + Checking both early and late sessions. + No loss measurement also acts as a ramp-up. + Return ReceiveRateMeasurement from send_traffic_on_tg_internal, as that is needed for detecting whether trial is ok as ramp up. - Udp needs quite low ramp-up rate after recent regression. - Max scale has higher rate (so failing) to avoid session timeouts. + Bump copyright year. Change-Id: I50c928659cd5b985b490a2e5fb69c5cd790600b0 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2021-01-04GSO: TAP/VHOST use casepmikus2-2/+69
Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: Ibafaaca4438587284d1e255c764f0701002941e8
2020-11-26Re-enable 9000B tests for ipsecVratko Polak1-4/+0
Ticket: CSIT-1771 VPP-1207 VPP-1675 Change-Id: I8ba2d62054361e72b833943327434ea071e7e568 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2020-10-29Support existing test types with ASTFVratko Polak1-0/+3
+ Add UDP_CPS, TCP_CPS, UDP_PPS and TCP_PPS suites. + Update existing cps traffic profiles. + Add missing traffic profiles. + UDP: + Single burst of 32 packets was confirmed as safe enough for TRex. + Maybe 64 could work, but not enough testing for that. + Multiple bursts have lead to reduced TRex performance, as overlaping bursts (from different client instances) tend to fill up the buffers. + TCP: + Data size set to 11111 bytes, completely arbitrarily. + Results look reasonable, so I have kept that. - MSS not set at all - No tested support for frame size other than 64B. - Frame size does not even factor into TCP profiles. + So other frame sizes are skipped in autogen. + Update tags in related suites. - HOSTS_{n} and SRC_USER_{n} should be unified. - Questionable clarification on difference between IP4BASE and SCALE. + Add NAT state resetters to tests that need them. + Resetter is called (if set) before each measurement. + If ramp-up is detected, resetter is not set. + Rename "mult" argument to "multiplier". + Abstracted from packets to transactions. + Transaction corresponds to profile. + TRex multiplier argument sets target rate in transactions per second. + The familiar STL traffic: + Bidirectional is considered to be 2 packets per transaction. + Unidirectional is considered to be 1 packet per transaction. + The newer ASTF traffic: + 4 subtypes, each has different number of packets per transaction. + For max rate computation: + Packets in the more numerous direction are considered. + Rely on TRex reported traffic duration for ASTF: + Use the server side value. - Client side value is higher by an overhead. - TRex is not sending traffic during that time. + Remove delays from traffic profiles. - Those delays would increase the reprted traffic time. + Support for scale lmited trials. + Only for ASTF profiles, each ASTF profile has limited scale. + Scale defined in suite variables. + For TRex to send all transactions provided duration value is ignored. + The appropriate value is computed in TrafficGenerator. + An ad-hoc time constant is added to match the TRex client side time overhead. + The profile driver receives the computed duration. + Measurement for PLRsearch add a sleep if the computed duration is smaller. + Alternative argument for search algos if scale is limited. + Both need higher timeout to accomodate big scales. + MLRsearch can afford fewer phases. + Added a parameter to optionally shorten the duration. + Use short duration for runtime stats trial and failure stats trial. + Use very large keepalive values in udp profiles to avoid ka packets. + No polling in ASTF profile driver. - Polling could eliminate the time overhead value. + But polling proved to introduce some loss, affecting the results. + Handle duration stretching in ASTF by stopping traffic. + The stop has several steps so that: + The traffic is really stopped entirely. + Late packets do not count (maybe as errors). + Stats are preserved to read for results (and cleared afterwards). + Several quantities added to ReceiveRateMeasurement: + Original target duration is preserved (algos need that). + Input estimate (tps) for early search iterations. + Output estimate (maybe pps) for MRR output. + Strict result (unsent counts as loss) for NDR. + Use L2 counters (opackets, ipackets) where possible. - TRex has trouble processing packets for the L7 ones at high loads. + Remove warmup from profile drivers and keywords. + Suites should call "Send ramp-up traffic" explicitly if needed. + Added parsing for few more counters. + Both to use in formulas or just for debug purposes. - Only 64B cases in autogen, framesize support to be added later. + Latency streams during search can be enabled via PERF_USE_LATENCY env var. + MLRsearch improvments: + Rename argument names to min_rate and max_rate. + Use relative receive rate in initial phase. + PLRsearch improvements: + Careful computation when output (pps) does not match input (tps). + Use geometric distribution (instead of Poisson). + Helps agains math errors. + This should improve estimate stability. - But in practice big losses still lead to significant jumps. + Traffic generator improvements: + send_traffic_on_tg now calls the full set_rate_provider_defaults. + _send_traffic_on_tg_internal for the logic without provider defaults. + As the internal function is re-used by measure() without affecting defaults. + Move _parse_traffic_results just before get_measurement_result. + As the latter uses fields set bu the former, it is now easier to read. + Multiple sources for approximate duration. + Tried from more precise to more available. + Includes logic for _pps tests (added in later change). + Move explicit type conversions to earlier occurences. + Profile driver output field uses semicolons to simplify parsing. + Performance Robot lib file split to several smaller ones. + performance_actions.robot: + Hosts Additional Statistics Action For * keywords. + performance_display.robot: + Hosts keyword for displaying and verifying results. + Change test message to use the correct unit (pps or cps). + performance_limits.robot renamed to performance_vars.robot + Added many keywords, mostly for accessing test variables. + Moved variables for Policer into a new keyword there. + Some keywords need sophisticated logic. - Other are basically Get Variable Value. + But in future more logic can be added, without editing callers. + Documentation for the new keywords acts as a documentation for test variables. + performance_utils.robot has the rest. + Eliminated arguments if the value is in test variable. + Small improvements to documentation. - Still not enough cleanup with respect to arguments and test variables. + Keywords are sorted alphabetically now in each one. + Suites: + Unified variables table: + No colons in comments. + ${n_hosts}, ${n_ports} and use them instead hardcoded numbers. + Add -cps to existing cps suite names. + Remove "trial data overwrite". + Compute max rate as in STL suites. + Each NAT suite has ip4base suite to compare results to. - Those act as indirect TRex calibration. - VPP does not lose packets in those. + Latency in ASTF suites is disabled hard. - As we do not support latency in ASTF profiles yet. + Unidirectional tests governed by suite variable, not an argument. + Write long argument lists vertically. + Prefer to use argument names. + In Python, also the last argument is followed by comma. + It makes renaming and reordering easier. + Similarly applies to prints with long lists of values. + A TODO to update api crc file comments. Change-Id: I84729355edbec051298a9de1162107f88ff5737d Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2020-07-16Remove remains of WRK testsTibor Frank1-5/+0
Change-Id: If61783fb717757c6189f06924412bd079e15a08f Signed-off-by: Tibor Frank <tifrank@cisco.com>
2020-06-09Remove leading tc[nn] from test namesJuraj Linkeš2-14/+8
The test names are unique without it and the information doesn't add anything extra. Change-Id: Idc7d6d1d21c8c05691e1757227a0a3787406d370 Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
2020-04-23Performance: DPDK refactorPeter Mikus1-5/+34
+ Rework BASH scripts (more code to python). + Move BASH into libraries. + Allows RDMA usage. + Fix 9000B tests. + Rename confusing l2fwd -> testpmd. + Fix suite setup. + Fix PCI whitelist to not accidentally pickup wrong interface. + Fix deprecated DPDK cli arguments. - MLX5 jumbo are disabled on NIC (i will increase separately). https://jenkins.fd.io/job/csit-dpdk-perf-verify-master-2n-clx/6/console (l3fwd still broken) - MLX5 IMIX seems to be some TRex issue with IMIX for mlx5 (i will handle separately) Signed-off-by: Peter Mikus <pmikus@cisco.com> Change-Id: I31d1b67305fa247cb5e1f57e739d3ef30dc1a04b
2020-04-06Improve pf layerPeter Mikus1-6/+6
+ Merge single/double link + Introduce _pf{n}[0] variables so we can access physical function same way as virtual function + Cleanup code by moving complex logic to python + Prepare code for multiple vf functions Signed-off-by: Peter Mikus <pmikus@cisco.com> Change-Id: Ic2e74a38bfa146441357de8f0916aeb638941c49
2020-03-12rls2001 perf: fix hoststack test packet sizesDave Wallace2-7/+13
- TCP packet size is 1460B not 9000B - QUIC packet size is 1280B not 9000B Change-Id: I6604a74fa533db4ac782782c85ea54038688627a Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2020-03-10Regenerator: Fix pylint errorsTibor Frank2-9/+7
Change-Id: I91458b897003f5d8f7f7ac9214aa824c113cecea Signed-off-by: Tibor Frank <tifrank@cisco.com>
2020-03-03perf: Clean up Hoststack testsDave Wallace2-75/+23
- Update test names with clients/streams - Convert test results to JSON output * iperf3 results include bits_per_second * vpp_echo results include both client and server output which includes time in seconds and rx_data/tx_data in bytes which can be used to calculate the average bits per second. Tx and Rx data will always be the same: BPS = (client tx_data * 8) / ((client time + server time) / 2) - Fix WRK test results data formatting errors Change-Id: Ie2aeb665e3cc0739b16f97ba2628eebe6e041d22 Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2020-02-03Autogen: Fix typo affecting DPDKVratko Polak1-1/+1
With the typo, only the first type+nic combination is generated. With fix, all combinations are generated. Change-Id: Ieb2db31cebed4940b063505b70f4d12a30da489c Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2020-01-30perf: Add hoststack NSIM+LDPRELOAD+IPERF3 test suiteDave Wallace1-4/+6
Change-Id: Ia7a876b1aa240676e1f2d23618c1d4e09ead14f0 Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2020-01-29perf: QUIC transport hoststack test suiteDave Wallace1-7/+7
Change-Id: I73f4be7ea315c7a5dcce46e1bd3034bcb0a97ee2 Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2020-01-28perf: hoststack iperf3 test tuningDave Wallace2-16/+18
Change-Id: I53425f57fe9ecef9cff2c94642cc7cb24537a961 Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2020-01-17perf: add TCP Iperf3+LDPRELOAD test suiteDave Wallace2-19/+79
Change-Id: Icff49fb31cce342a2a4ae799e844ec91f9e5e366 Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2020-01-10Support suite tags in autogenVratko Polak2-22/+167
+ Include a script to add suite tags to many suites at once. + Add suite tags also to device tests (not covered by autogen). Change-Id: I514ee6178e22999b43460028fe2696738b012f04 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2020-01-10Autogen: Generate also NIC drivers.Vratko Polak1-27/+100
+ Disallowed -avf- (or -rdma-) as "template" suites. + GBP suite switched to DPDK driver in repo. + Each NIC has its own list of supported drivers, in Constants. + Updated tag expressions for daily jobs: + Feature, ipsec, memif, scale, srv6, tunnels, vhost and vts are tested only with vfio-pci. + Other (base, dot1q, dot1ad) tested with all drivers. + Setup actions currently depend on driver, generated. - The performance_rdma action is trivial for now. - Several tests fail, to be fixed later, e.g. by performance_rdma. + Reconf tests are also supported. + Added DRV_VFIO_PCI tags missing, mainly in density tests. - Vhost suites (density, reconf) are failing, but suites look good. - TCP suites do not support NIC drivers yet. - DPDK obviously not supported. + Use Python 3 in regenerate scripts. + Fix typos binded => bound. + File open modes set either u"rt" or u"wt" everywhere. + Remove a trailing space in an environment variable name. Change-Id: I290470675dc5c9e88b2eaa5ab6285ecd9ed7827a Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2019-11-28Python3: resources and librariesJan Gelety2-124/+140
Change-Id: I1392c06b1d64f62b141d24c0d42a8e36913b15e2 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2019-09-04Clarify why 9000B tests are skipped for IPsecVratko Polak1-1/+2
Ticket: VPP-1207 Change-Id: I506b4a24dfa6b10578407b261926f37215a714f4 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2019-08-27- Removed 9000B test cases from ipsec test suites.Ludovit Mikula1-0/+3
- Added new traffic profiles. Signed-off-by: Ludovit Mikula <ludovit.mikula@pantheon.tech> Change-Id: Ie06b7a1cf4d9df403d098b7a495219fd95e5869e
2019-08-23Introduce reconfig suites, for dot1q+ip4+vxlanVratko Polak1-1/+43
Ticket: CSIT-1551 + Config copied from other suites. + Layer keywords prepared for additional chains. + Renamed "create" argument to "vlan_per_chain". + TrafficGenerator result extraction improvements. + Also unified TG type and subtype checking. + Throughput estimated as PDR for zero PLR. + Actual Qemu start is skipped. + Parse xstats instead of stats in trex stop scipt. - Because stats are unconditionally cleared on each script connect. + Remember start values to get better ReceiveMeasurementResult at stop. + Expose loss count and time as appropriate test message. + Autogen support. + Multiple chain amounts and core densities. - Only 1 additional chain. + Proper TAGs. Documented. + Clarified min framesize tags are for TG-DUT. + Added a TODO concerning overhead values. + Added 118B tag. + Robot performance keywords improvements. + Added missing return value documentation. + Frame size as required test variable, not an explicit argument. + MLRsearch keyword to store result (not into test message). - TODO: De-duplicate: main keyword to measure, minor to set test message. - But implementation uses the fact default arguments are different. + Keywords for starting and stopping background traffic. - No checks whether start-stop pair is complete. + Multiple minor indentation and logging improvements. - Missing / TODOs: - Support also vlan_per_chain=True? - Support dot1q without vxlan? - Support also deletion? - How to package config steps so -reconf can be generated from -ndrpdr? Change-Id: If0270697f9ffa837c34ef802917220a53f156703 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2019-08-19Autogen: Create NICs for TCP suites.Vratko Polak3-245/+270
+ Put Regenerator internal functions ourside class. + Duplicate into _default_ and _tcp_ functions. + Rework Testcase to be a single class with two factories. + Improve suite and testcase naming. Change-Id: I1f835b576c476c1a40c8c52469b1876695f9ae73 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2019-07-24NF_density dot1qip4udpvxlanPeter Mikus1-1/+2
+ NF_density compatible + Baseline VM tests compatible + Scalability NxM - 3n variant is missing in VXLAN and DOT1Q due to requests to have it asymmetrical - TODO Change-Id: Ia817d7be00622b594b451bc07756240d1a379e04 Signed-off-by: Peter Mikus <pmikus@cisco.com>
2019-06-21Allow 9000b tests for AVFVratko Polak1-4/+0
See https://gerrit.fd.io/r/20148 Change-Id: I22856b14e3608348f2ccecb1d99d87209db2d776 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2019-05-27FIX: do not generate 9000B perf test in case of vic1385 nicJan Gelety1-0/+3
Change-Id: I7b8e30903a8bc012a3bb43bfb33755e08b56dc1d Signed-off-by: Jan Gelety <jgelety@cisco.com>
2019-05-09Add new higher density NF testsPeter Mikus1-0/+5
Change-Id: Ib2f3f3f8dc3e202dc1db53c739d9309be2ed8a60 Signed-off-by: Peter Mikus <pmikus@cisco.com>
2019-04-26NF density tests with dtc=0.5 and dtcr=2Peter Mikus1-1/+1
Change-Id: Icff556142280ad0b6261e0a2bfb71672ee6b3807 Signed-off-by: Peter Mikus <pmikus@cisco.com>
2019-04-08Upgrade autogen to NICs and search typesVratko Polak3-36/+128
+ All perf suites updated, as autogen change is backward incompatible. + Only x710 -ndrpdr suites remain in git repository. + Removed retry feature of run_tests. + Renamed topology_type and traffic_type to traffic_profile. + Renamed framesize to frame_size; nic_model to nic_name. + Reordered Variables table to start with nic_name and overhead. + Fixed wrong overhead value in some cbc-sha1 suites. + Fixed some suite tags. ++ Introduced tags to distinguish suites, such as IPSECINT. + Bound crypto hardware to NIC name. + Implemented NIC limit hiding. + Also search and teardown related arguments are now hidden. + Main measurement keywords updated to new arg handling. + Max rate related keywords moved to performance_limits.robot + Teardowns unified. + Generated tests are archived. ++ Generated directory is .gitignore-d. + Regenerator raises an exception on seeing non-compatible suite. ++ Relatively helpful message should be seen in exception. + Suite and template Documentation has generated parts. +- With short NIC names only. + Autogen checker also upgraded. + Tag expressions replaced with long files to ensure analogous tests. Change-Id: I60e9a999187e7da1f60d0eb4fb02afa14682aa46 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2019-02-27Add tox.ini and few checker scriptsVratko Polak2-35/+23
The plan is to change csit-validate-pylint-master job to fail if (and only if) tox fails. This will allow us to easily add checks, with or without the voting power. Each check produces log (ignored in .gitignore) the voting job can archive. + Made autogen quiet by default, to avoid spam in autogen checker. + Unified the way direct csit subdirectories are git-ignored. Change-Id: I6477b1ef7da6d3e30f68c5850d04900cc52f431e Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2019-02-19Adapt autogen for SFd testsVratko Polak1-12/+23
+ Make the skipping logic in autogen more flexible. + Do not emit 4c cases when there is too much VMs/containers. + Peter says the second -eth- should be renamed away from suites. + Regenerate suites so test case names match (new) suite names. Change-Id: I95ecc47ca07b8bae6693d5d4330811ff55672fc4 Signed-off-by: Vratko Polak <vrpolak@cisco.com>