aboutsummaryrefslogtreecommitdiffstats
path: root/resources/libraries/python
AgeCommit message (Collapse)AuthorFilesLines
2016-05-09Interface VxLAN testTibor Frank1-0/+26
JIRA: CSIT-45 - add test: Honeycomb modifies interface configuration - VxLAN - add keywords used in these tests to set and verify configuration - add method and vat template for dumping an interface's configured VxLAN - fixed requirements.txt Change-Id: I6d6c360a4d478a0e40eecf7c0235969e7c06f7a9 Signed-off-by: Tibor Frank <tifrank@cisco.com> Signed-off-by: C.J. Collier <cjcollier@linuxfoundation.org>
2016-05-06Add Honeycomb interface management tests (ipv4, ipv6, ethernet, routing)selias2-0/+50
- add test cases for managing ipv4, ipv6, ethernet and routing configuration on VPP interface - add keywords used in these tests to set and verify configuration - add method and vat template for dumping an interface's configured IP addresses - add method for converting between ipv4 netmasks and network prefixes - clean up documentation of older Honeycomb keywords Note: Test cases are tagged with a placeholder tag to allow manual test runs locally. It should be replaced with the appropriate environment tags once Honeycomb service is deployed on virl. Change-Id: I99ce1e72c8550f520f8c35ef4a93eaebb530db78 Signed-off-by: selias <samelias@cisco.com> Signed-off-by: Matej Klotton <mklotton@cisco.com>
2016-05-06Honeycomb API keywords - interface, bridge domainTibor Frank5-673/+1186
- add keywords to manipulate data using Honeycomb REST API to configure interfaces and bridge domains - remove "add_vpp_to_honeycomb_network_topology" method from HoneycombSetup.py - remove "parse_json_response" from HoneycombUtil.py - add methods to manipulate data from Honeycomb REST API Change-Id: I5e6f87097fe9bfccffa3d4aae21f63281353cf29 Signed-off-by: Tibor Frank <tifrank@cisco.com>
2016-05-06Add "show error" output into vpp statsPeter Mikus1-0/+10
- Add "show error" debug output into VPP show stats as verbose subcommand is not parsed correctly in output of vpp_api_test Change-Id: I924c54bb86375e43770fd449b8d6aaa7a3413bcb Signed-off-by: Peter Mikus <pmikus@cisco.com>
2016-05-04Update T-rex version to v2.00pmikus1-9/+13
- JIRA: CSIT-14 - Update T-rex version to v2.00 with latest API - Compatibility fixes of affected libraries and robot files - T-rex performance tuning Change-Id: I3a90553032d6d82e6e03df7e0b52e205d3f6ba4e Signed-off-by: pmikus <pmikus@cisco.com>
2016-05-02Add vpp_create_loopbackMatus Fabian1-0/+16
Change-Id: If934d7ec28f86b070a0cafa0ee56d0bcf4e2ac6d Signed-off-by: Matus Fabian <matfabia@cisco.com>
2016-04-26Add qinq through xconnect tests.Patrik Hrnciar2-0/+69
Change-Id: Ia20f5959dab41290bf60490ead830f0e37ecff0d Signed-off-by: Patrik Hrnciar <phrnciar@cisco.com>
2016-04-26Extend host topology with NIC type filteringMiroslav Miklus2-8/+46
JIRA: CSIT-1 Changes to allow filtering based on NIC model. Switched xconnect perf test to use filtered topology. Change-Id: Id526f47dc28f92bf26d070e54819ad29bccc0440 Signed-off-by: Miroslav Miklus <mmiklus@cisco.com>
2016-04-26Honeycomb interface state management testselias2-35/+35
- add simple test for interface management through Honeycomb API - add status code 500 to honeycomb startup check whitelist, due to Honeycomb changes in https://gerrit.fd.io/r/772 - increase timeout value for Honeycomb startup check - modify Honeycomb setup keywords to allow starting Honeycomb on individual nodes - remove sanity test suite, tests now sorted by functional areas such as interfaces, bridge domains, VXlan,... Change-Id: I87f9cf69577706f3b00e24a8d2c01df52fc707c6 Signed-off-by: selias <samuel.elias@pantheon.tech>
2016-04-26Add optional args to traffic script arg parserMatus Fabian1-2/+10
Change-Id: I92e890e0c42da34e1e72a442f7a3bbe12fe9aef1 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2016-04-26Add IPsec utilities python libraryMatus Fabian1-0/+362
JIRA: CSIT-28 Change-Id: I9513f14a9920bfbdaf34c5cc5d4619d16a383ca2 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2016-04-25Honeycomb API keywordsTibor Frank2-26/+618
- add keywords to get, put post and delete configuration data using Honeycomb REST API - add keywords to get operational data using Honeycomb REST API Change-Id: If75221777e0e83a809c834addf82e95bbd540e21 Signed-off-by: Tibor Frank <tifrank@cisco.com>
2016-04-22Reformat python libraries.Matej Klotton30-660/+696
PEP8 reformat fix typos docstrings reformat Change-Id: Ic48ba4e06490630808b8e2ab1ab0b046ec7eeed7 Signed-off-by: Matej Klotton <mklotton@cisco.com>
2016-04-22VatExecutor updateMatus Fabian2-0/+38
Strip non-JSON data from VAT terminal output Add method for VAT command retval verification Change-Id: Ibe68020393cb1a700ad048dc78078f71064707b4 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2016-04-17Multicore VPP setup for performance testingpmikus1-3/+44
- add multithread TAGS documentation - add methods to VppConfigGenerator for RSS configuration - create KW for multithread setup - create sample test case using multithread vpp setup - add Documentation into TCs Change-Id: Id40862490d49380dc76d1d3ce39314603f983fd3 Signed-off-by: pmikus <pmikus@cisco.com>
2016-04-15Update Qemu libraryMatus Fabian1-7/+49
Incorporated changes from nested VM on VIRL. Change-Id: I76ceeb2dde635c2cf0d3a53d29bf24fed72a5437 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2016-04-13VXLAN test with dot1q tagging.Matej Klotton3-16/+61
Change-Id: I3dbd12983736e338d757c580570d91680aedd83f Signed-off-by: Matej Klotton <mklotton@cisco.com>
2016-04-13Move methods from topology.py to more appropriate place.Matej Klotton6-418/+341
Change-Id: I2612a9466095b3d79a4a9d938fcdbf9f93133f69 Signed-off-by: Matej Klotton <mklotton@cisco.com>
2016-04-13Honeycomb setup and utilsTibor3-242/+390
- re-implement HTTPCodes as IntEnum rather then dictionary - add methods to manipulate data using honeycomb - get, set, delete - change the name of url file from vpp_version.url to oper_vpp_version.url - improve checking of startup and shutdown state of honeycomb - PEP8 fixes - add docstrings in all modules and classes - move logging to the lowest possible level - improve logging in exceptions - add method exec_command_sudo_log to resources.libraries.python.ssh module Change-Id: I54e0c6b45313e3a3c11bafa475488ae2b1e605c2 Signed-off-by: Tibor Frank <tifrank@cisco.com>
2016-04-13Add keywords for Honeycomb testsselias2-20/+78
-add interface dump and bridge-domain dump to Vat command templates -add low level keywords to implement vat dump commands The resulting data dumps will be used in Honeycomb testing, to verify data retrieved through Honeycomb API. Change-Id: I2a913eaf23aa13d7223576220681821007672812 Signed-off-by: selias <samuel.elias@pantheon.tech>
2016-04-11Combined DropRateSearchpmikus1-82/+155
- combined search algorithm using linear and binary search - add KWs into performance library for binary and combined search - remove short_bridge_domain_binary.robot as binary and combined search KWs are in library for optional use - PEP8 fixes Change-Id: I4a6c3c07c82db4f855fb93214b0532ee0c783e0a Signed-off-by: pmikus <pmikus@cisco.com>
2016-04-08Add Vagrantfile for local testing.Stefan Kobza2-17/+65
Vagrantfile contains 3 VMs as of now, 2 DUTs 1 TG, with these notes: - login is csit/csit - by default provision script installs all deb packages from the dir where Vagrantfile is - developed for, and only tested on vbox (someone can pick up vmware) - All nodes have 1 shared mgmt network: 192.168.255.0/24 - hosts have these IP addresses in host-only network TG : 192.168.255.100 DUT1 : 192.168.255.101 DUT2 : 192.168.255.102 - script created to download MAC address information - PCI addresses are always the same for vbox (not sure about vmware) HOWTO (will create a wiki page once one is created for CSIT project): - copy Vagrantfile to separate dir on host - vagrant up --parallel sit-back-and-relax - from VM that has access to the same host-only network (192.168.255.0 above) - copy your ssh-key to csit@192.168.255.{101,102,250} using ssh-copy-id - cd ${csit_dir} - virtualenv & pip as in README - export PYTHONPATH=${csit_dir} - resources/tools/topology/update_topology.py -v -f -o topologies/available/vagrant_pci.yaml \ topologies/available/vagrant.yaml - pybot -L TRACE \ -v TOPOLOGY_PATH:topologies/available/vagrant_pci.yaml -s \ "ipv4" tests - see tests results Change-Id: Ic27626605a9c820bca977b38f4e8ca37d1504ff5 Signed-off-by: Stefan Kobza <skobza@cisco.com>
2016-04-05Setup and check honeycomb on all DUTsselias4-2/+671
- methods implementing HTTP requests (PUT,GET,POST,DELETE) - methods for parsing HTTP responses - methods for honeycomb setup on DUT - updated constants.py - keywords for honeycomb setup and communication - simple honeycomb sanity test (not enabled for jenkins job runs) Change-Id: I589f0ca56cc01072b92fe9363aed16a4098aee40 Signed-off-by: selias <samuel.elias@pantheon.tech>
2016-04-01Add get_vhost_user_if_name_by_sockMatus Fabian1-0/+16
Change-Id: I1d7f2cdfcf29763ce94417c98d363021f1fb27a1 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2016-03-30Add linux_add/del_bridge and modify vpp_add_l2fib_entryMatus Fabian1-4/+39
linux_add_bridge - bridge two interfaces on linux node linux_del_bridge - delete bridge from linux node vpp_add_l2fib_entry - param interface should be interface name or sw_if_index Change-Id: Ia8030e24a0afe088df0dcb6c65a85ed341224206 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2016-03-30BestN/WorstN DropRateSearchpmikus1-29/+132
- implementation of Best-of-N/Worst-of-N result evaluation with max attempts per one rate step Change-Id: Ice1d6e93807d90761462c4df601cbe068011159a Signed-off-by: pmikus <pmikus@cisco.com>
2016-03-24Setup and run QEMU VMMatus Fabian1-2/+358
Change-Id: I22640caa9f13be09d2a837c6332d7b86cef77efc Signed-off-by: Matus Fabian <matfabia@cisco.com>
2016-03-24Add node type VM to set_interface_stateMatus Fabian1-1/+1
Change-Id: Ib70de73eec7c015f328f877fa34ead15e27eb254 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2016-03-24Binary DropRateSearchpmikus1-4/+69
- binary search - short perf bridge_domain with binary Change-Id: I50538738b356cc8fef4cfcb4974c43c5123827d1 Signed-off-by: pmikus <pmikus@cisco.com>
2016-03-18Remove apt-get call to install dependencies.Carsten Koester1-15/+0
Change-Id: I309a13bc857b89f1f342d659ab80b70d7a5fc686 Signed-off-by: Carsten Koester <ckoester@cisco.com>
2016-03-18Add SSH disconnectMatus Fabian1-0/+11
Change-Id: Ib0efec083aa9ee33b7d15680e5a15989827b8e57 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2016-03-18Fixed SSH exec_command timeoutMatus Fabian1-15/+6
Change-Id: I8cd2fcfbe774bd651ed57be0129c32d6ba68adcc Signed-off-by: Matus Fabian <matfabia@cisco.com>
2016-03-17DropRateSearch libraryMiroslav Miklus2-60/+406
- linear search - t-rex DropRateSearch implementation - long perf bridge_domain test - introduced PERFORMANCE_SHORT, PERFORMANCE_LONG test tags Change-Id: I497b72f3e6d58a67ca5a386403d1e84dcf433ec4 Signed-off-by: Miroslav Miklus <mmiklus@cisco.com>
2016-03-14Add vxlan tests using xconnectPatrik Hrnciar4-13/+22
Change-Id: I190689d5a624f1c876df90ce29b05a2b0b8a2df4 Signed-off-by: Patrik Hrnciar <phrnciar@cisco.com>
2016-03-14Add VM to NodeTypeMatus Fabian1-0/+2
Change-Id: Ic3a313837f48a1c7bd1c70876c82799ac1994f2f Signed-off-by: Matus Fabian <matfabia@cisco.com>
2016-03-14SSH connect use port specified in node dictMatus Fabian1-1/+2
Change-Id: I4ed7d58466724e68dc7ad22f85f6e7703a6c7a64 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2016-03-11Add Vhost-user interfaces libraryMatus Fabian1-0/+39
Change-Id: I295e67b4a5622b1fff4fbe5d4a7e5753f3c4af57 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2016-03-11Add KW to build QEMU 2.2.1 on nodeMatus Fabian1-0/+40
Change-Id: I58271aff1ef558752f00593bbad5c3317d08288d Signed-off-by: Matus Fabian <matfabia@cisco.com>
2016-03-11Update VPP version downloaded from Nexus.Matej Klotton2-11/+23
Change-Id: Iae2ee6d576347262d9f3f9a9e9b9cc65dbc5bf5e Signed-off-by: Matej Klotton <mklotton@cisco.com>
2016-03-10Add library to generate VPP configuration fileCarsten Koester1-0/+331
Change-Id: Icc202c82b238a30735ffa3d0017c61e2dd8bd532 Signed-off-by: Carsten Koester <ckoester@cisco.com>
2016-03-07Modify sweep ping test casesJuraj Sloboda3-5/+83
- Write separate sweep ping test cases for jumbo frames - Compute sweep ping end size from reported MTU on DUT interface - Set MTU on TG according to MTU on DUT interface - Log VPP packet traces on IPv4 and IPv6 tests failure - Remove VM_ENV tag from sweep ping test cases for jumbo frames Change-Id: I47aa7977bcff9c4366c67578aef542924a1d055b Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2016-03-07change interface up calls to explicit keywordsselias2-5/+19
Remove implicit "set interface state" calls from ipv4 and ipv6 test keywords. Use robot keyword instead. Change-Id: I535a7a967910e77dded39eb167fb9c164187566e Signed-off-by: selias <samuel.elias@pantheon.tech>
2016-03-07Add with-statment support to VatTerminal.Matej Klotton6-81/+77
Change-Id: I7b4b32ce07b9247ccf80bf6b5d3339d00bc0999f Signed-off-by: Matej Klotton <mklotton@cisco.com>
2016-03-07Performance suite reorg, v4 testsMiroslav Miklus1-56/+93
- perf suite splitted to 1.xconnect 2.bridge-domain 3.IPv4 - IPv4 perf tests implemented - renamed perf tests prefix 2core -> 1core Change-Id: I9ef2dbdfcfdcb36e8865989e6255d69ced33269c Signed-off-by: Miroslav Miklus <mmiklus@cisco.com>
2016-03-04Add more IP networks to IPV4_NETWORKS and IPV6_NETWORKSMatej Klotton2-4/+2
Change-Id: If340a21aac02f94aaf8a282f7b689c0f5d9aa438 Signed-off-by: Matej Klotton <mklotton@cisco.com>
2016-03-02Transfer l2_xconnect setup to L2UtilPatrik Hrnciar2-46/+23
Change-Id: I7a661c9ce8b5f9ca8fbd36858f7a9cd6f1da8ffd Signed-off-by: Patrik Hrnciar <phrnciar@cisco.com>
2016-02-29Add VXLAN testMatej Klotton4-70/+139
Change-Id: Id1d37fda2697fbfb7aa7a79318f8316b80e96963 Signed-off-by: Matej Klotton <mklotton@cisco.com>
2016-02-27Fix checksum comparison in traffic scriptsJuraj Sloboda1-1/+23
Change-Id: Ibeff7c790ed4aba8b3a0534681912d0d5b826dbb Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2016-02-27Minor change in virtual env creationJan Gelety1-1/+3
- increase timeout for virtualenv creation - confirm successful virtualenv creation Change-Id: Ic973f97e23ccf35c677849f31251637bf8551fef Signed-off-by: Jan Gelety <jgelety@cisco.com>
2016-02-26T-REX: startup config generationMiroslav Miklus1-4/+47
- T-rex startup config generated based on computed path - move t-rex tooling to t-rex directory Change-Id: I3ac698f41f98934bcce4af35dc3a755a8948e887 Signed-off-by: Miroslav Miklus <mmiklus@cisco.com>