aboutsummaryrefslogtreecommitdiffstats
path: root/resources/libraries/python
AgeCommit message (Collapse)AuthorFilesLines
2016-05-30Update Honeycomb testsselias1-2/+2
- add new test cases based on reported bugs - minor fixes Change-Id: I8b7464bc1f4e786e3a0ef67ba64d81e1c25ae5cf Signed-off-by: selias <samelias@cisco.com>
2016-05-26Find PDR using binary searchPeter Mikus2-6/+98
- JIRA: CSIT-72 - modify libraries for PDR search evaluation - write robot framework keywords for PDR search - write Performance Test Cases using PDR Change-Id: Id06a2a7f78fe8626c221afe4178c5c30cc599762 Signed-off-by: Peter Mikus <pmikus@cisco.com>
2016-05-24Add test cases with "dpdk no-multi-seg" in vpp startup configPeter Mikus1-1/+41
- JIRA: CSIT-73 - Add ability to configure no-multi-seg parameter in VPP startup configuration - Add keywords to selectively configure parameters in startup configuration - Modify testcases Change-Id: I3c5c0a1cc2b1156d5a87ff36628b50793dd9ac5f Signed-off-by: Peter Mikus <pmikus@cisco.com>
2016-05-23Add temporary fix for CSIT-90 by flushing QGA's input bufferCarsten Koester1-0/+16
This is not a final fix. The final fix SHOULD send a "guest-sync" request as per" http://wiki.qemu.org/Features/QAPI/GuestAgent#QEMU_Guest_Agent_Protocol However, this temporary fix will eliminate the nested VM startup failures triggered by the nested VM's guest-agent receiving a partial guest-ping request. Change-Id: Ice409b7c966a527b03cb71c042b476e1771676d0 Signed-off-by: Carsten Koester <ckoester@cisco.com>
2016-05-23Capture VPP stats for Long and Short testsMiroslav Miklus1-0/+22
JIRA: CSIT-71 - remove warmup for short runs - clear and collect stats for short run - run short test with no failure for long test with NDR/PDR rate Change-Id: I1b8879c3b891165072822207d0781687d8159336 Signed-off-by: Miroslav Miklus <mmiklus@cisco.com>
2016-05-23Patch: Start binary search from max range ratePeter Mikus1-7/+13
- JIRA: CSIT-96 - Add option to start binary search with max range rate value first and then continue the binary search of half interval. Change-Id: Ia6d2f4aa6fc20ca2ee4d43d0ddb3966422b28144 Signed-off-by: Peter Mikus <pmikus@cisco.com>
2016-05-20Add Honeycomb TAP interface testselias1-2/+26
JIRA: CSIT-75 - add test suite for TAP interface management through Honeycomb - add keywords required for TAP interface tests - move Honeycomb suite setup and teardown to new __init__ file - cleanup unused imports in Honeycomb test case files - modify "...should be empty" keywords to allow more reuse Change-Id: Ie3dc9069678b60c359f69c5a216e452e856a0107 Signed-off-by: selias <samelias@cisco.com>
2016-05-20Tests for vhost-user interface configurationTibor Frank2-0/+16
JIRA: CSIT-76 - add tests for vhost-user interface manipulation: - create, modify, delete - add negative tests: - wrong interface type - wrong configuration Change-Id: I09239ef099a6f9672895f9540762e5044123f7ec Signed-off-by: Tibor Frank <tifrank@cisco.com>
2016-05-18T-REX stl traffic send improvement for async callsMiroslav Miklus2-22/+100
JIRA: CSIT-68 - show runtime statistics with running traffic - T-REX driver async. driver Change-Id: Ie5eb7021f610fb58383b033dda5b1b867f7d3d2c Signed-off-by: Miroslav Miklus <mmiklus@cisco.com>
2016-05-18Patch: Detection of running t-rex instance before initializingPeter Mikus1-0/+3
- JIRA: CSIT-89 - Add detection of running t-rex traffic generator before new instance is initialized. Change-Id: I77009b0c5e83bb6e162b9800d02b4e5a2abd541f Signed-off-by: Peter Mikus <pmikus@cisco.com>
2016-05-16CSIT-18: Add GRE tunnel libraries and tests.Matej Klotton1-1/+34
Change-Id: I91ccd65a26ea1782611bccc3badd91e64366a162 Signed-off-by: Matej Klotton <mklotton@cisco.com>
2016-05-16Add keyword to manipulate vhost-user parametersTibor Frank1-0/+68
JIRA: CSIT-70 - add a keyword to be able to: - configure all vhost-user parameters at once - configure vhost-user parameters one by one - remove a vhost-user parameter - remove all vhost-user parameters at once - add a keyword which adds a new vhost-user interface Change-Id: I144bc035b959a1e4eb37c6a3d554e6843ddab4a7 Signed-off-by: Tibor Frank <tifrank@cisco.com>
2016-05-13CSIT-65: Add new test for LISP APIAndrej Kozemcak2-0/+665
Test set and unset this API: lisp_add_del_locator_set lisp_add_del_locator lisp_add_del_local_eid lisp_add_del_map_resolver lisp_gpe_add_del_iface Change-Id: I9c701fc421d4106147891a7e75e5d68885b9ba59 Signed-off-by: Andrej Kozemcak <akozemca@cisco.com>
2016-05-13Add keyword to manipulate interface TAP parametersTibor Frank1-0/+67
JIRA: CSIT-69 - add a keyword to be able to: - configure all TAP parameters at once - configure TAP parameters one by one - remove a TAP parameter - remove all TAP parameters at once - add a keyword which adds a new TAP interface Change-Id: I5620adc3f777f7a337bbd737e685891b425d4e09 Signed-off-by: Tibor Frank <tifrank@cisco.com>
2016-05-13Add possibility to create a VxLAN interface.Tibor Frank2-12/+85
JIRA: CSIT-51 - add a keyword which adds a new VxLAN interface - change InterfaceUtil.vxlan_dump to be able to return info about all VxLAN interfaces. Change-Id: I8ad3dc1d414924e74ea1ecea1f316ca5c648e2d0 Signed-off-by: Tibor Frank <tifrank@cisco.com>
2016-05-12Add possibility to change VxLAN parameters at onceTibor Frank1-12/+20
JIRA: CSIT-51 - modify existing keyword "configure_interface_vxlan" to be able to: - configure all VxLAN parameters at once - configure VxLAN parameters one by one - remove a parameter - remove all parameters at once Change-Id: I50551fbc3ae5c6aa147d531fc66b583af36bb541 Signed-off-by: Tibor Frank <tifrank@cisco.com>
2016-05-12Update Honeycomb interface IPv4 testselias2-15/+30
- add verification of ipv4 subnet prefix support - modify keywords to allow setting ipv4 address with network prefix - fix variable definitions to evaluate numbers as ints, not strings - add exception to ipv4 netmask/prefix conversion method Change-Id: I9343ceb35856ddb33674d7067f1def6d40e99acc Signed-off-by: selias <samelias@cisco.com>
2016-05-12Add functions to get interface name or index from JSON interface dump.Matej Klotton1-0/+54
Change-Id: I4778c9fa72e418f6fea427f88fd9aa1ea579ac99 Signed-off-by: Matej Klotton <mklotton@cisco.com>
2016-05-11Performance IPv6 library and short/long test casespmikus2-0/+34
- JIRA: CSIT-2 - Create IPv6 test cases for long/short/singlethread/multithread performance testing - Create robot KWs for IPv6 performance testing - Add T-Rex IPv6 profile Change-Id: I306d5c894d9b9287bf91929764aeb1c7083d802c Signed-off-by: pmikus <pmikus@cisco.com> Signed-off-by: Peter Mikus <pmikus@cisco.com>
2016-05-11Move Honeycomb libraries to honeycomb subdirectory.Tibor Frank5-12/+31
- move all Honeycomb related libraries written in python to new directory resources/libraries/python/honeycomb - update all related includes in all source files Change-Id: Ifa96b8f670b456b14421929d6020ddf8e02d9cbc Signed-off-by: Tibor Frank <tifrank@cisco.com>
2016-05-11Add iACL IPv4/IPv6 tests.Patrik Hrnciar4-1/+138
- IPv4: CSIT-15 - IPv6: CSIT-16 Change-Id: I6e66aa853dfaebf1388f1191dbb63f5216820325 Signed-off-by: Patrik Hrnciar <phrnciar@cisco.com>
2016-05-11Add Max TX Queues configuration to VppConfigGeneratorpmikus1-1/+44
- Add ability to configure max-tx-queus parameter in VPP startup configuration Change-Id: Iaf857ed037c934fbda46eda6bfe1be4ef7faba15 Signed-off-by: pmikus <pmikus@cisco.com>
2016-05-09CSIT-9: COP Whitelist/blacklistZdeno4-3/+105
- Included are also IPv6 tests - JIRA: CSIT-17 Change-Id: I89ae6c38cdc6742a597c0dc24ed1c033c1b5d155 Signed-off-by: Zdeno <zolsovsk@cisco.com>
2016-05-09CSIT-19: MAC split-horizon groupJan Gelety1-1/+4
- test case to test MAC split-horizon group functionality Change-Id: Iadee707f3670e5fc9c209bd8b072a65ea1af27cd Signed-off-by: Jan Gelety <jgelety@cisco.com>
2016-05-09QEMU VM guest-ping fixMatus Fabian1-1/+4
JIRA: CSIT-62 Change-Id: I0affda16af8f983895c50fbc306f45f30fbb69cd Signed-off-by: Matus Fabian <matfabia@cisco.com>
2016-05-09Interface VxLAN testTibor Frank1-0/+26
JIRA: CSIT-45 - add test: Honeycomb modifies interface configuration - VxLAN - add keywords used in these tests to set and verify configuration - add method and vat template for dumping an interface's configured VxLAN - fixed requirements.txt Change-Id: I6d6c360a4d478a0e40eecf7c0235969e7c06f7a9 Signed-off-by: Tibor Frank <tifrank@cisco.com> Signed-off-by: C.J. Collier <cjcollier@linuxfoundation.org>
2016-05-06Add Honeycomb interface management tests (ipv4, ipv6, ethernet, routing)selias2-0/+50
- add test cases for managing ipv4, ipv6, ethernet and routing configuration on VPP interface - add keywords used in these tests to set and verify configuration - add method and vat template for dumping an interface's configured IP addresses - add method for converting between ipv4 netmasks and network prefixes - clean up documentation of older Honeycomb keywords Note: Test cases are tagged with a placeholder tag to allow manual test runs locally. It should be replaced with the appropriate environment tags once Honeycomb service is deployed on virl. Change-Id: I99ce1e72c8550f520f8c35ef4a93eaebb530db78 Signed-off-by: selias <samelias@cisco.com> Signed-off-by: Matej Klotton <mklotton@cisco.com>
2016-05-06Honeycomb API keywords - interface, bridge domainTibor Frank5-673/+1186
- add keywords to manipulate data using Honeycomb REST API to configure interfaces and bridge domains - remove "add_vpp_to_honeycomb_network_topology" method from HoneycombSetup.py - remove "parse_json_response" from HoneycombUtil.py - add methods to manipulate data from Honeycomb REST API Change-Id: I5e6f87097fe9bfccffa3d4aae21f63281353cf29 Signed-off-by: Tibor Frank <tifrank@cisco.com>
2016-05-06Add "show error" output into vpp statsPeter Mikus1-0/+10
- Add "show error" debug output into VPP show stats as verbose subcommand is not parsed correctly in output of vpp_api_test Change-Id: I924c54bb86375e43770fd449b8d6aaa7a3413bcb Signed-off-by: Peter Mikus <pmikus@cisco.com>
2016-05-04Update T-rex version to v2.00pmikus1-9/+13
- JIRA: CSIT-14 - Update T-rex version to v2.00 with latest API - Compatibility fixes of affected libraries and robot files - T-rex performance tuning Change-Id: I3a90553032d6d82e6e03df7e0b52e205d3f6ba4e Signed-off-by: pmikus <pmikus@cisco.com>
2016-05-02Add vpp_create_loopbackMatus Fabian1-0/+16
Change-Id: If934d7ec28f86b070a0cafa0ee56d0bcf4e2ac6d Signed-off-by: Matus Fabian <matfabia@cisco.com>
2016-04-26Add qinq through xconnect tests.Patrik Hrnciar2-0/+69
Change-Id: Ia20f5959dab41290bf60490ead830f0e37ecff0d Signed-off-by: Patrik Hrnciar <phrnciar@cisco.com>
2016-04-26Extend host topology with NIC type filteringMiroslav Miklus2-8/+46
JIRA: CSIT-1 Changes to allow filtering based on NIC model. Switched xconnect perf test to use filtered topology. Change-Id: Id526f47dc28f92bf26d070e54819ad29bccc0440 Signed-off-by: Miroslav Miklus <mmiklus@cisco.com>
2016-04-26Honeycomb interface state management testselias2-35/+35
- add simple test for interface management through Honeycomb API - add status code 500 to honeycomb startup check whitelist, due to Honeycomb changes in https://gerrit.fd.io/r/772 - increase timeout value for Honeycomb startup check - modify Honeycomb setup keywords to allow starting Honeycomb on individual nodes - remove sanity test suite, tests now sorted by functional areas such as interfaces, bridge domains, VXlan,... Change-Id: I87f9cf69577706f3b00e24a8d2c01df52fc707c6 Signed-off-by: selias <samuel.elias@pantheon.tech>
2016-04-26Add optional args to traffic script arg parserMatus Fabian1-2/+10
Change-Id: I92e890e0c42da34e1e72a442f7a3bbe12fe9aef1 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2016-04-26Add IPsec utilities python libraryMatus Fabian1-0/+362
JIRA: CSIT-28 Change-Id: I9513f14a9920bfbdaf34c5cc5d4619d16a383ca2 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2016-04-25Honeycomb API keywordsTibor Frank2-26/+618
- add keywords to get, put post and delete configuration data using Honeycomb REST API - add keywords to get operational data using Honeycomb REST API Change-Id: If75221777e0e83a809c834addf82e95bbd540e21 Signed-off-by: Tibor Frank <tifrank@cisco.com>
2016-04-22Reformat python libraries.Matej Klotton30-660/+696
PEP8 reformat fix typos docstrings reformat Change-Id: Ic48ba4e06490630808b8e2ab1ab0b046ec7eeed7 Signed-off-by: Matej Klotton <mklotton@cisco.com>
2016-04-22VatExecutor updateMatus Fabian2-0/+38
Strip non-JSON data from VAT terminal output Add method for VAT command retval verification Change-Id: Ibe68020393cb1a700ad048dc78078f71064707b4 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2016-04-17Multicore VPP setup for performance testingpmikus1-3/+44
- add multithread TAGS documentation - add methods to VppConfigGenerator for RSS configuration - create KW for multithread setup - create sample test case using multithread vpp setup - add Documentation into TCs Change-Id: Id40862490d49380dc76d1d3ce39314603f983fd3 Signed-off-by: pmikus <pmikus@cisco.com>
2016-04-15Update Qemu libraryMatus Fabian1-7/+49
Incorporated changes from nested VM on VIRL. Change-Id: I76ceeb2dde635c2cf0d3a53d29bf24fed72a5437 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2016-04-13VXLAN test with dot1q tagging.Matej Klotton3-16/+61
Change-Id: I3dbd12983736e338d757c580570d91680aedd83f Signed-off-by: Matej Klotton <mklotton@cisco.com>
2016-04-13Move methods from topology.py to more appropriate place.Matej Klotton6-418/+341
Change-Id: I2612a9466095b3d79a4a9d938fcdbf9f93133f69 Signed-off-by: Matej Klotton <mklotton@cisco.com>
2016-04-13Honeycomb setup and utilsTibor3-242/+390
- re-implement HTTPCodes as IntEnum rather then dictionary - add methods to manipulate data using honeycomb - get, set, delete - change the name of url file from vpp_version.url to oper_vpp_version.url - improve checking of startup and shutdown state of honeycomb - PEP8 fixes - add docstrings in all modules and classes - move logging to the lowest possible level - improve logging in exceptions - add method exec_command_sudo_log to resources.libraries.python.ssh module Change-Id: I54e0c6b45313e3a3c11bafa475488ae2b1e605c2 Signed-off-by: Tibor Frank <tifrank@cisco.com>
2016-04-13Add keywords for Honeycomb testsselias2-20/+78
-add interface dump and bridge-domain dump to Vat command templates -add low level keywords to implement vat dump commands The resulting data dumps will be used in Honeycomb testing, to verify data retrieved through Honeycomb API. Change-Id: I2a913eaf23aa13d7223576220681821007672812 Signed-off-by: selias <samuel.elias@pantheon.tech>
2016-04-11Combined DropRateSearchpmikus1-82/+155
- combined search algorithm using linear and binary search - add KWs into performance library for binary and combined search - remove short_bridge_domain_binary.robot as binary and combined search KWs are in library for optional use - PEP8 fixes Change-Id: I4a6c3c07c82db4f855fb93214b0532ee0c783e0a Signed-off-by: pmikus <pmikus@cisco.com>
2016-04-08Add Vagrantfile for local testing.Stefan Kobza2-17/+65
Vagrantfile contains 3 VMs as of now, 2 DUTs 1 TG, with these notes: - login is csit/csit - by default provision script installs all deb packages from the dir where Vagrantfile is - developed for, and only tested on vbox (someone can pick up vmware) - All nodes have 1 shared mgmt network: 192.168.255.0/24 - hosts have these IP addresses in host-only network TG : 192.168.255.100 DUT1 : 192.168.255.101 DUT2 : 192.168.255.102 - script created to download MAC address information - PCI addresses are always the same for vbox (not sure about vmware) HOWTO (will create a wiki page once one is created for CSIT project): - copy Vagrantfile to separate dir on host - vagrant up --parallel sit-back-and-relax - from VM that has access to the same host-only network (192.168.255.0 above) - copy your ssh-key to csit@192.168.255.{101,102,250} using ssh-copy-id - cd ${csit_dir} - virtualenv & pip as in README - export PYTHONPATH=${csit_dir} - resources/tools/topology/update_topology.py -v -f -o topologies/available/vagrant_pci.yaml \ topologies/available/vagrant.yaml - pybot -L TRACE \ -v TOPOLOGY_PATH:topologies/available/vagrant_pci.yaml -s \ "ipv4" tests - see tests results Change-Id: Ic27626605a9c820bca977b38f4e8ca37d1504ff5 Signed-off-by: Stefan Kobza <skobza@cisco.com>
2016-04-05Setup and check honeycomb on all DUTsselias4-2/+671
- methods implementing HTTP requests (PUT,GET,POST,DELETE) - methods for parsing HTTP responses - methods for honeycomb setup on DUT - updated constants.py - keywords for honeycomb setup and communication - simple honeycomb sanity test (not enabled for jenkins job runs) Change-Id: I589f0ca56cc01072b92fe9363aed16a4098aee40 Signed-off-by: selias <samuel.elias@pantheon.tech>
2016-04-01Add get_vhost_user_if_name_by_sockMatus Fabian1-0/+16
Change-Id: I1d7f2cdfcf29763ce94417c98d363021f1fb27a1 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2016-03-30Add linux_add/del_bridge and modify vpp_add_l2fib_entryMatus Fabian1-4/+39
linux_add_bridge - bridge two interfaces on linux node linux_del_bridge - delete bridge from linux node vpp_add_l2fib_entry - param interface should be interface name or sw_if_index Change-Id: Ia8030e24a0afe088df0dcb6c65a85ed341224206 Signed-off-by: Matus Fabian <matfabia@cisco.com>