aboutsummaryrefslogtreecommitdiffstats
path: root/resources/libraries/python
AgeCommit message (Collapse)AuthorFilesLines
2020-10-19FIX: disable sending IPv6 RA messages from VMsJuraj Linkeš1-9/+10
There were occasional Router Advertisement packets received in a Traffic Generator in VM testcases. Fix by adding config that disables sending IPv6 RA messages on interfaces in VM VPP config before enabling them. Also rename related keywords and change descriptions based on https://docs.fd.io/vpp/21.01/db/d4c/clicmd_src_vnet_ip6-nd.html#clicmd_ip6_nd Change-Id: I1c2a33337ac91f6039d287b4c2aac388e3a52383 Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
2020-10-19Tests: Remove GBPpmikus1-346/+0
- Specs - Tests - Library - TODO: PAL Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I8890940d56c7a9924d4a5f9365b6bb881610db14
2020-09-12Test: Add ramp-up phase to nat44ed-udir testsJan Gelety1-2/+28
Change-Id: I3aa50ec1ef9b0445014daa31e767323060f4a03f Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-09-30test: compute max_translations_per_thread based on worker threads numberJan Gelety1-0/+16
Change-Id: I1c638aef886bf37a9feb4a29e4949c7c8f19b717 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-09-28Constants: Lower Mellanox pps limitVratko Polak1-1/+7
The previous 60 Mpps stil leads to ~30% duration stretching. + Add comment on why 36 Mpps was chosen as the new limit. Change-Id: Ic11e8ece03939bdc8680cd7bc4122373583a2f17 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2020-09-25FIX: Workaround AVF interface down until VPP-1934pmikus1-1/+7
- Follow up https://jira.fd.io/browse/VPP-1934 Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: Id0a26c5f67f229480332530a8531401d954f4422
2020-09-24test: nat44det - add session number checkJan Gelety1-1/+33
- some tests need to reduce rate for ramp-up phase - some tests need to extend trail duration in ramp-up phase - removed 2n1l-10ge2p1x710-ethip4udp-nat44det-h1-p63-s63 suite as nat out ports are randomly selected from available port range so T-Rex stateless is not able to provide required out2in traffic Change-Id: I1145496610d202f81d911e68aa819844d7600918 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-09-23FIX: Race conditionpmikus1-0/+12
avf tests works, but vfio-pci tests are following, the interfaces must be in down state (ideally unbind, as vpp cannot pick them). Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I77af85ec4239059a5455ef68683ca129548bd7bd
2020-09-23FIX: Mellanox handlingpmikus1-2/+2
- From 2n-zn2 testing Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I9b1f0916f0f1d90a223918cfe48409d29f2ee773
2020-09-23Framework: AVFpmikus1-0/+22
Fix 1/3: Explicitly put PF interface up (this patch) Fix 2/3: Done on TB Fix 3/3: VPP bug displaying VF up if underlying PF is not up Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I45d66986ec76e6e14eebaad6828ef72724c626ab
2020-09-22Framework: Heapsize configurationpmikus4-22/+32
- https://gerrit.fd.io/r/c/vpp/+/28829 - https://gerrit.fd.io/r/c/vpp/+/28896 - ip6 to be added later Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I7b03b8ace5c5c7582d4a2f66bfd788a3ec80a916
2020-09-11Add ipsec async mode performance test casesYulong Pei1-0/+19
In VPP 20.05, vpp added async crypto engine that support to use QAT hardware to do encryption and decryption, vnet/ipsec enabled async mode to use async crypto engine. Current async crypto engine also use dpdk_cryptodev as async handlers, in the future it may add other native QAT driver as async handlers. Note that async crypto engine is to support vnet/ipsec, it is different with current existing dpdk backend which itself has ESP implementation in plugins/dpdk/ipsec. Change-Id: I4e6eaa7ca1eddb8b1c45212de0684fb26907119b Signed-off-by: Yulong Pei <yulong.pei@intel.com>
2020-09-03Framework: Code aligmentspmikus4-24/+284
+ Unifying code structures - To easily plug another DUT + New PCI PassThrough templates + Improved perf stat on cores allocated in test. Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I325f17b977314f93cb91818feddfddf3e607eb8a
2020-09-03Framework: Bump DPDK 20.08pmikus3-7/+3
+ DPDK 20.08 + Migrate make -> meson + Fix all trending issues Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I31dcb22627c0f8d17ec63c5b138a2da958b006f4
2020-08-24T-Rex: 2.82, core pin, 8 workerspmikus1-2/+2
+ Bump T-Rex version. We need new features for ASTF test. + Apply core pining. Results in a more stable performance. + Tweak the number of T-Rex workers. + We need an even value to achieve ymmetric performance with pinning. + Value 8 was selected as a best compromise. This is a combination of 3 commits. This is the 1st commit message: T-Rex: 2.82 This is the commit message #2: Change Trex to CORE_MASK_PIN mode to improve performance https://trex-tgn.cisco.com/trex/doc/trex_stateless.html#_core_masking_per_interface Above link have below explaination, "When the profile is symmetric, performance can be improved by pinning half of the cores to port 0, and half of the cores to port 1, thus avoiding cache trashing and bouncing." The reason to change this is that to run CSIT with 100G NIC often failed with "TRex stateless runtime error timeout", it caused by Trex can not send enough traffic within the fixed duration. by change to CORE_MASK_PIN mode fix the issue. Not editing ASTF, as that supports different options. This is the commit message #3: Experiment: Vary number of TRex workers With CORE_MASK_PIN, we can get more predictable time distribution. Decided to use 8 workers, that gives good results both for high end (RDMA-core l2patch) and low end (vhost) tests. Change-Id: I5c61127799e0624464e960fcb980ad1c4058e744 Signed-off-by: pmikus <pmikus@cisco.com> Signed-off-by: Yulong Pei <yulong.pei@intel.com> Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2020-08-24Framework: Qemu alignmentspmikus2-17/+28
Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I2781e85f44acffb4f8d7f02326ba2ca668dad0c5
2020-08-08Fix: NAT44 deterministic moved to separate det44 pluginJan Gelety1-44/+96
- align CSIT code with VPP code changes for NAT44 deterministic (DET44) feature - align test names according to snat44ed tests - remove obsolete 3-node nat tests - remove 2n1l-10ge2p1x710-ethip4udp-snat44det-h1048576-p63-s66060288 tests (not enough memory for such high number of sessions) Change-Id: I9a22b99b4cfa56d18e9c7ef9c58296e202567d42 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-08-20Framework: use 'stl' in trex stateless profile namesJan Gelety1-3/+2
Change-Id: I74641cc89d2f25d50b67d51bf2567082b420aabb Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-08-19Add Intel E810CQ 100G NIC configurationYulong Pei2-2/+7
for Intel E810CQ 100G NIC, kernel driver of PF is ice, kernel driver of VF is iavf, its VF hardware support VPP native avf driver. Signed-off-by: Yulong Pei <yulong.pei@intel.com> Change-Id: Ic8d86e5ee00057bbbcd09df619a38bd1371c8fd7
2020-08-07Perf: NAT44 endpoint-dependent mode - udp, part IJan Gelety5-50/+212
- continuation of https://gerrit.fd.io/r/c/csit/+/26898 as there was reached limit of changes (1000) Jira: CSIT-1711 - udp synthetic profiles w/o data packets - udp cps perf tests, phase I (no special "search cps" KW) Part I means that we are using MRR tests to collect traffic data until there is ready new CPS test type with corresponding algorithm. Change-Id: I0d30feb9ecf1d0bff937152656f8eb422f831378 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-08-18Framework: Qemu alignmentspmikus1-8/+21
Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I20098fca8fb513accef3edc9a72bfd3c56bf9be2
2020-08-18Framework: Alignmentspmikus1-2/+2
Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I1b535ea61ab68f6e37989ffc942979cdfd24f55e
2020-08-17Framework: Profiles loadpmikus2-139/+200
Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: Iab84aff31a23bb9d8e1165f5314004803fd8a501
2020-08-17Measure latency only in special casesVratko Polak1-6/+14
+ Measure latency in 90/50/10/0% PDR loads in ndrpdr tests. + Do not measure latency anywhere else. - Needs manual editing to re-enable in soak tests. Change-Id: I69fa11bfcf71012f683061c5effea52a1be91620 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2020-07-23T-Rex: Add advanced stateful modeJan Gelety2-151/+351
- provide base routines to run T-Rex in advanced stateful mode Change-Id: Ib0dc5f2919c370753335f6446860683dc4b12d93 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-07-31Framework: Perf stat capturingPeter Mikus2-2/+67
Change-Id: I3bbe1fe0073ddeead5219993675f24955e8c3dfd Signed-off-by: Peter Mikus <pmikus@cisco.com>
2020-07-30Introduce per DUT configurable statspmikus1-0/+3
- test/suite/global - binary logic is not working Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: Ia3d81cbf2c5f04d1093a0a408c84a9ffc6f3eef0
2020-07-28Soak: Avoid a possible deadlock.Vratko Polak1-3/+5
Change-Id: I31c2d7744b5cd3021132fb188480b8edec74986c Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2020-07-23FIX: Log required cli_cmd not "cli_inband"Jan Gelety1-2/+2
Change-Id: If0975b1d54882390c5be418927e2961d0f4c8429 Signed-off-by: Jan Gelety <jgelety@cisco.com> Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2020-07-16Remove remains of WRK testsTibor Frank3-88/+0
Change-Id: If61783fb717757c6189f06924412bd079e15a08f Signed-off-by: Tibor Frank <tifrank@cisco.com>
2020-07-13Soak: Do not allow negative lossVratko Polak2-2/+11
Change-Id: I6da359d25edc415e44263d3f85f166369e564987 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2020-07-13Soak: Fix worker exception passingVratko Polak1-2/+10
Change-Id: I636f020e97df1b37ac8b6a30af511eebe611b56f Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2020-06-30make graph node variant can be configured from gerrit triggerYulong Pei2-1/+19
for example, below will trigger VPP with default code path test in CSIT, "csit-2n-clx-perftest mrrAND64bANDnic_intel-xxv710ANDeth-l2bdbasemaclrnNOTdrv_avf" and below will trigger VPP with avx512 code path test in CSIT, "csit-2n-clx-perftest icl mrrAND64bANDnic_intel-xxv710ANDeth-l2bdbasemaclrnNOTdrv_avf" Change-Id: Id3abf932203ce00f34f8643c5bc4d5fc4d3e6efb Signed-off-by: Yulong Pei <yulong.pei@intel.com>
2020-06-23Revert "Tweak TRex cores and RDMA pps limit"Vratko Polak1-6/+2
This reverts commit 925c5bfcffb2bc6b833a8e64b7f3a06bbca52197. It was affecting 2005 performance, confusing comparisons. The revert includes the RDMA limit. Change-Id: I9c31b061ee59bc5cb14d623ac98a65763ef75f1c Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2020-06-09Remove leading tc[nn] from test namesJuraj Linkeš2-14/+8
The test names are unique without it and the information doesn't add anything extra. Change-Id: Idc7d6d1d21c8c05691e1757227a0a3787406d370 Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
2020-05-26FIX: do not fail when skipping patch for l3fwdJan Gelety1-2/+4
Change-Id: I1159fb29d43f61628922cdbd51313f710aa72f4a Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-05-15Performance: Tests with virtio driver in VMPeter Mikus1-7/+8
Signed-off-by: Peter Mikus <pmikus@cisco.com> Change-Id: I20e01dfe83a961dc8202d33783a678d38e71cff2
2020-05-14Execute also show runtime CLIVratko Polak1-0/+2
Example of a test with missing info: https://logs.fd.io/production/vex-yul-rot-jenkins-1/csit-vpp-perf-mrr-daily-master-2n-clx/287/archives/log.html.gz#s1-s1-s1-s4-s8-t3-k2-k9-k1-k1-k4-k1 - Missing any -outpt and -tx nodes. - Zeros in vectors in rdma-input node (even though calls are there). Placing the CLI call after the stats one, to confirm stats does not "break" the CLI. + Using an earlier parent, to dodge some test failures. Change-Id: I79072b54b6bf964dab4f21428e186394bafda72a Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2020-05-11CSIT-1597 API cleanup: ipsecJan Gelety1-2/+6
- cover API changes in VPP: https://gerrit.fd.io/r/c/vpp/+/26276 - update vpp stable to version 20.05-rc0~727 Change-Id: I39a0b5e60fac6a74aff2426f6a448c0e117ab647 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-05-07perf: refactor 'setup suite topology interfaces'Dave Wallace1-15/+46
- and 'setup suite topology interfaces no tg' to use a common keyword to create suite variables using the required topology information. Change-Id: I46894948bc86eb7ce72d036e5b84f09c5c1385db Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2020-05-06Separate files needing GPL licenseVratko Polak4-449/+39
+ Keep apache license for now, until this is completed: https://wiki.fd.io/view/TSC/Relicensing_Procedure + Add utilities for switching license comment blocks. - They do not preserve attributes, so executable flag is lost. + Move the affected files to GPL/. + Update paths so files are executed from the new location. + Change the way scripts are started to do not require executable flag. + Employ OptionString when constructing longer command lines. + Move also PacketVerifier.py and TrafficScriptArg.py as they are linked with traffic scripts. + That means the two files are outside "resources" package tree now. + Added __init__.py files so relative imports work in new package tree. + Start traffic scripts as python modules to allow relative imports. + Once again needed because they are outside the default PYTHONPATH. Change-Id: Ieb135629e890adbaf5b79497570f3be25b746f9f Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2020-05-06Performance: Fix l3fwd in 3nodepmikus1-1/+2
Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I32fd935078fb117bb1570e20a11baa2de46447e8
2020-05-04VPP-DEV API Coverages: SRv6Jan Gelety1-6/+6
Jira: CSIT-1698 Change-Id: I6d9154284990df8877850e4014716510016e485b Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-04-28CSIT-1597 API cleanup: lispJan Gelety2-800/+110
- cover API changes in VPP: https://gerrit.fd.io/r/c/vpp/+/24663 - update vpp stable to version 20.05-rc0~637 - remove unused L1 and L2 lisp KWs Change-Id: I2672b6a375ad70c82f331dcc991c145e868108b9 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-04-27Performance: MLX best practicePeter Mikus1-2/+41
- Part II Signed-off-by: Peter Mikus <pmikus@cisco.com> Change-Id: I869a3d7e051dcbae3a230d4646219e70e5de2e87
2020-04-27Performance: TRex approximatedDuration and approximateRatePeter Mikus1-2/+17
- API to provide duration for send and receive traffic Signed-off-by: Peter Mikus <pmikus@cisco.com> Change-Id: Id186a200be66b7703348e6fd3099ffd405e915ae
2020-04-23FIX: Mellanox jumbo framesPeter Mikus1-34/+9
Signed-off-by: Peter Mikus <pmikus@cisco.com> Change-Id: I84b3c07e22a313e96ac59fc7818960c502507651
2020-04-23Performance: DPDK refactorPeter Mikus8-225/+436
+ Rework BASH scripts (more code to python). + Move BASH into libraries. + Allows RDMA usage. + Fix 9000B tests. + Rename confusing l2fwd -> testpmd. + Fix suite setup. + Fix PCI whitelist to not accidentally pickup wrong interface. + Fix deprecated DPDK cli arguments. - MLX5 jumbo are disabled on NIC (i will increase separately). https://jenkins.fd.io/job/csit-dpdk-perf-verify-master-2n-clx/6/console (l3fwd still broken) - MLX5 IMIX seems to be some TRex issue with IMIX for mlx5 (i will handle separately) Signed-off-by: Peter Mikus <pmikus@cisco.com> Change-Id: I31d1b67305fa247cb5e1f57e739d3ef30dc1a04b
2020-04-22FIX: NF_density MAC addressesPeter Mikus2-18/+18
Signed-off-by: Peter Mikus <pmikus@cisco.com> Change-Id: I0e773060c344fda7b06937a81a53863a96a4373a
2020-04-17FIX: Proper NUMA computePeter Mikus1-0/+3
+ FIX for Vratko's FIX Change-Id: Ia6ff137120d84bdd2b9e02e3e935c62d1c732b7b Signed-off-by: Peter Mikus <pmikus@cisco.com>