Age | Commit message (Collapse) | Author | Files | Lines |
|
+ Add functions for creating rdma interface
+ Fix traffic generator
Signed-off-by: Peter Mikus <pmikus@cisco.com>
Change-Id: I81787b72ff5ee926ed652d350888c4f86da766f1
|
|
+ Restore alphabetic order in yaml.
+ Mark the lisp messages verified to be covered by dev instead of virl.
+ Mark the GBP messages verified by devicetest now.
+ Mark acl_add_replace as dev and create_subif as perf.
+ Mark ip_probe_neighbor as unused L1.
+ Improve loadbalancer comments.
- Nat4 testcase is described, even if not merged yet.
+ Forget reported CRC after initial dir report,
and report them again (once) in test cases (if hit).
With this, single run (with fail on crc off) gives full info.
+ Small improvements to CRC library docstrings and messages.
Change-Id: Ic1cfad45e10d437be827af2a89eac49e25267b59
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
+ Small bugfixes in various suites
Signed-off-by: Peter Mikus <pmikus@cisco.com>
Change-Id: I051af0a6da7340fe3f617400370c3846ca5241ab
|
|
+ Instead of transferring large files, post-process directly
via CSIT. Extract backtrace as a start point.
Signed-off-by: Peter Mikus <pmikus@cisco.com>
Change-Id: I79ad760d310c95d807242ad1997dd657d5142459
|
|
Change-Id: I61555ba566efef0a2151db9a30bf7f5d9ccad1df
Signed-off-by: haiyanx1.zhang <haiyanx1.zhang@intel.com>
|
|
- Should fix the read/write to socket for LXC
Signed-off-by: Peter Mikus <pmikus@cisco.com>
Change-Id: I56a84145cf2fb95742423789681ca2e24ddf0c98
|
|
Change-Id: Ia395cfbc5325d292bf8c32bb24e9a1478c140780
Signed-off-by: Jan Gelety <jgelety@cisco.com>
|
|
- use new vpp ref build - ubuntu 16.04:
20.01-rc0~324-g66a332c~b8122
- use new vpp ref build - ubuntu 18.04:
20.01-rc0~324-g66a332cf1
- use new vpp ref build - centos7:
20.01-rc0~324_g66a332c~b7936
Change-Id: I82c6032742939417914f5210b1fba4464ab1e70d
Signed-off-by: Jan Gelety <jgelety@cisco.com>
|
|
- it will avoid situation that corresponding port is not up and
its sw_if_index value in topology file is None that is interpreted
as 0 in vpp api so it set flag for local0 interface
Change-Id: I9145077d787ddde50a29bcd4091035e95077f946
Signed-off-by: Jan Gelety <jgelety@cisco.com>
|
|
Change-Id: I6c7eff8d9cbb196ccb684a45579ac59942351cfe
Signed-off-by: premkumarv <preym17@gmail.com>
|
|
+ Enable hdrh in trex server.
+ Append hdrh coded output after min/avg/max/.
+ Read (not show nor decode) hdrh value in PAL.
+ Also, remove old ndrpdrdisc code.
Change-Id: I99d99f10386a621772b5419ca1f36080fa15aca7
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
TRex does not zero the server counters.
It copies the values to use as reference,
and subtracts them when asked for results.
But the reference is stored in the client (not the server).
And CSIT uses different scripts to start and stop async traffic,
which means different clients.
This patch introduces a workaround.
Async start will return xstats objects to use as reference,
and async stop will use the objects to compute the correct results.
The xstats objects are stored in TrafficGenerator instance.
Sync measurement does not export the counters, to shorten logs.
Other improvements:
+ Make stop_traffic_on_tg return measurement results directly.
+ Rename --async to --async_start as "async" is reserved in Python 3.7
+ Minor pylint, docstring and typo fixes.
Change-Id: I5fc56a0763afb7d62cfa7c0651f96b6867de3e15
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
cover API changes in VPP: https://gerrit.fd.io/r/c/vpp/+/21458
Change-Id: I596cfcd192bf48b0d0a91b1953746a484e2c9793
Signed-off-by: Jan Gelety <jgelety@cisco.com>
|
|
Change-Id: I0c2bee5a1ff8ad29e47c4f947388e7b97dd17fff
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
- Attempt to repair IPsec LispGpe perf suite.
+ Collection name to reflect the current stable vpp.
+ Add messages found in CSIT L1 keywords.
- Uncommented (instead of deleted) untestable messages. Reasons:
- Honeycomb.
- Messages used by unused keywords.
+ Listed reasons. Honeycomb not mentioned if both reasons apply.
+ Delete CRC items for commands not found in keywords anymore.
+ Add CRCs from .json.api files (as teardown is hard to execute).
+ Define and restore alphabetical order.
+ Add hints to find used API commands (not entirely reliable).
+ Move used commands to "cmd = " form so hints find them.
+ Argument to run_cli_command changed from "cmd" to "cli_cmd".
+ Except also struct.error where IOError is excepted.
Change-Id: I61058dbe1e33296908aabd0c13433bb16cfa6adf
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
- Mount is affecting only LXC container
Signed-off-by: Peter Mikus <pmikus@cisco.com>
Change-Id: I84140ea5e48120792fc84182a97eb7d06c954a84
|
|
Also, use double quotes, so the dict is shown
not only as a valid Python code, but also a valid JSON.
This should make it easier to handle big CRC changes such as:
https://logs.fd.io/production/vex-yul-rot-jenkins-1
/vpp-csit-verify-api-crc-master/646/console.log.gz
+ Log indented message about CRC conflict to console even on failure,
as in the exception, endlines are escaped.
Change-Id: If4fe3003f612d4b0c156004a0aa2dab088e50723
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
+ Rename bool unidirection to int traffic_directions.
+ Rename "untagged" to "initial" for bandwidth calculation.
+ Fix latency measurement for unidirectional traffic.
+ Remove duplicate colon in soak test message.
+ Edit PAL to accept both forms.
+ Fix minor documentation issues.
Change-Id: I6c76f2dc090ae493f2fbd7e9ccd45229d2306dea
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
During https://gerrit.fd.io/r/c/ci-management/+/21955
we decided this new default is more convenient for development.
Change-Id: I07f10cbb586e79f6ac714ad635dda35561c07125
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
- HDRhistogram can be rebased and used in separate patch.
Signed-off-by: Peter Mikus <pmikus@cisco.com>
Change-Id: Ic7ce752344c6e1791af7cf7b7effde65ac2be680
|
|
The VPP change got a temporary -1,
as other change has higher priority.
Bumping stable VPP version, so this passes verify right away.
This reverts commit ae62a4348f7de53cfb91a5ae25a10723d5f9b398.
Change-Id: If2813b0e41451a3a9e7f8b1512521cf508ac92c7
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
cover API changes in VPP: https://gerrit.fd.io/r/c/vpp/+/21706
Change-Id: I16b3e3e29e7e7491cd19c067e8f3d8ced4947852
Signed-off-by: Jan Gelety <jgelety@cisco.com>
|
|
Change-Id: I7c2a29cfe48eee521cce5fcc3506cef39d51d37b
Signed-off-by: Jan Gelety <jgelety@cisco.com>
|
|
Signed-off-by: Peter Mikus <pmikus@cisco.com>
Change-Id: I5ab8fe05074a842301a511bbd3ab5e67f8d1a9f0
|
|
+ Ability to get stats from CNF via SocketPAPI
- Remove obsolete functions
Signed-off-by: Peter Mikus <pmikus@cisco.com>
Change-Id: I4d1b32a7279244592be96644e4f8a530c4f29a15
|
|
Change-Id: I4a2d4719dfa7c993c54b278a0093ea833307bb87
Signed-off-by: Jan Gelety <jgelety@cisco.com>
|
|
Instead of using EnsureGlobalVariable,
which is clunky to use from Python.
As a consequence, all caps variables from Constants.py are used directly
and tests/__init__.robot and robot_enhancements.robot are deleted.
+ Rename the CRC global kill switch based on ci-man review.
Change-Id: I10723792475bc83352bf8c3b7f7946ecf885a194
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
The plan is to override the default in some (but not all) jobs.
The csit-vpp jobs shall do the checking, but vpp-csit jobs shall not
(except api-crc job of course) in order to confirm benign changes.
Change-Id: If59d17991de3fb0e847113a87e0533a8ee62af7f
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
Change-Id: I291c3dc852e7c1bde6fb6102a9168cfec9992682
Signed-off-by: Jan Gelety <jgelety@cisco.com>
|
|
Ticket: VPP-1207
Change-Id: I506b4a24dfa6b10578407b261926f37215a714f4
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
Trim both Python (L1) and Robot (L2) keywords,
as no test performs SR related deletions.
Change-Id: Ic76d870c3f58e927ea222b350e149d0770985072
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
- Added new traffic profiles.
Signed-off-by: Ludovit Mikula <ludovit.mikula@pantheon.tech>
Change-Id: Ie06b7a1cf4d9df403d098b7a495219fd95e5869e
|
|
This is a partial fix for:
Ticket: CSIT-1434
and should fix one pylint violation.
Many files to remove SSH() from remain.
+ Use -E (together with previous -S) in ssh.py when sudo=True.
Needed in some cases, no downsides expected.
Change-Id: Ie2ad03b3c656a4d3965a61a1e5435276f99a28c0
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
Ticket: CSIT-1551
+ Config copied from other suites.
+ Layer keywords prepared for additional chains.
+ Renamed "create" argument to "vlan_per_chain".
+ TrafficGenerator result extraction improvements.
+ Also unified TG type and subtype checking.
+ Throughput estimated as PDR for zero PLR.
+ Actual Qemu start is skipped.
+ Parse xstats instead of stats in trex stop scipt.
- Because stats are unconditionally cleared on each script connect.
+ Remember start values to get better ReceiveMeasurementResult at stop.
+ Expose loss count and time as appropriate test message.
+ Autogen support.
+ Multiple chain amounts and core densities.
- Only 1 additional chain.
+ Proper TAGs. Documented.
+ Clarified min framesize tags are for TG-DUT.
+ Added a TODO concerning overhead values.
+ Added 118B tag.
+ Robot performance keywords improvements.
+ Added missing return value documentation.
+ Frame size as required test variable, not an explicit argument.
+ MLRsearch keyword to store result (not into test message).
- TODO: De-duplicate: main keyword to measure, minor to set test message.
- But implementation uses the fact default arguments are different.
+ Keywords for starting and stopping background traffic.
- No checks whether start-stop pair is complete.
+ Multiple minor indentation and logging improvements.
- Missing / TODOs:
- Support also vlan_per_chain=True?
- Support dot1q without vxlan?
- Support also deletion?
- How to package config steps so -reconf can be generated from -ndrpdr?
Change-Id: If0270697f9ffa837c34ef802917220a53f156703
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
Logic improvements for rls1908 and post-pylint fixes:
+ Reduce search time to 30 minutes.
+ Use average instead alternating loads.
+ Rework log/exp avg/stdev from two estimates.
+ Introduce and use pessimistic variance of dual trackers.
+ Introduce safe_exp to use when None does not skip code.
+ Use dot relative imports (instead of disabling pylint).
+ Complete docstrings for simpler functions.
+ Append docstrings to named tuples.
+ Somewhat unify docstrings related to the same arguments.
+ Slightly improve intentation.
+ State named tuples as rtype where used.
+ Add returns and rtype to __repr__ where missing.
+ Return what docstring say (or update them).
+ Explicit copying for vector and matrix values.
Change-Id: I884c68b4839c5df5e8bef95e463666599603a0ff
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
Signed-off-by: Miroslav Los <miroslav.los@pantheon.tech>
Change-Id: I7682d802f405070e34f72bc4a80cbe6a63b03619
|
|
CSIT code alignment with API changes in VPP introduced
by patch https://gerrit.fd.io/r/c/vpp/+/18361
Change-Id: Ib0357bba79f55d297ef1086fbf3b760caca16cdb
Signed-off-by: Jan Gelety <jgelety@cisco.com>
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
+ Put Regenerator internal functions ourside class.
+ Duplicate into _default_ and _tcp_ functions.
+ Rework Testcase to be a single class with two factories.
+ Improve suite and testcase naming.
Change-Id: I1f835b576c476c1a40c8c52469b1876695f9ae73
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
Signed-off-by: Miroslav Los <miroslav.los@pantheon.tech>
Change-Id: I86bc69f8b2f38b58cb3eb030bec7d0ce5c79d040
|
|
Signed-off-by: Miroslav Los <miroslav.los@pantheon.tech>
Change-Id: Ie2f19a2e3b37e8d85656ab31ece59b89c76bea25
|
|
Change-Id: Ia9ec0d420c8db9e71234f74e4013c21d039931b2
Signed-off-by: Tibor Frank <tifrank@cisco.com>
|
|
Change-Id: I90901c4ab14dfa76dc3e1f786a4b986479e0ba47
Signed-off-by: Jan Gelety <jgelety@cisco.com>
|
|
Change-Id: I2ff45926a754647c1be6263cf8e5e0c7cbfedfef
Signed-off-by: Tibor Frank <tifrank@cisco.com>
|
|
+ Fixed Qemu
- Broad Exception should be addressed
- Policer is about to be refactored
- Drop search to be refactored
Signed-off-by: Peter Mikus <pmikus@cisco.com>
Change-Id: I97eb992497ff6334057bf82a0f413387706e17fd
|
|
+ Still workaround for VPP bug not creating dir at startup
Signed-off-by: Peter Mikus <pmikus@cisco.com>
Change-Id: I8b87ac70e5f85d538a25058dcb5453f89e21498f
|
|
Change-Id: Ie728bc73eb7429d246e82dd195fc63191c3ac51d
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
- force a python2 environment in tox for pylint
- let pylint load some compiled modules for member checking
- allow locally enabled pylint rules
- ignore bad enum names
- ignore complexity for code to be refactored by other tickets
- broad excepts are acceptable sometimes
Signed-off-by: Miroslav Los <miroslav.los@pantheon.tech>
Change-Id: If4c3a1b85e8609f074e1de8ce91fc9c4fedbeb38
|
|
Needed to verify CSIT expects the correct CRCs.
This reverts commit d541b2b7d99651b53bd21ff75cd5fdacf8472a98.
This reverts commit 2dd27f5a638b5231c0f074ca61e6b67fed9d1faf.
+ Some pylint related improvements since then.
+ Less and better documented caching to class fields.
+ Global kill switch in Constants.
Change-Id: Id459800744cd93c578eab9c2e84cb9528235b064
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
https://lists.fd.io/g/csit-dev/message/2867
Change-Id: I8934218f2ccac9a458cec37e71e403db7d49281c
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
- Needed for trending
Change-Id: I3d576e39d6e3b91821050fbd4a8a95380275797b
Signed-off-by: Tibor Frank <tifrank@cisco.com>
|