Age | Commit message (Collapse) | Author | Files | Lines |
|
- fix and update ipv4 and ipv6 tests
- add tests for ipv6 neighbor and vrf-id
- add tests for secondary IP address on ipv4, ipv6
Change-Id: I1e422e61108493a63a65ad91f649e69dfff0842f
Signed-off-by: selias <samelias@cisco.com>
|
|
Using pypcap's L2listen instead of standard AF_PACKET scapy can
see received Dot1Q tag.
Change-Id: Icb3dcb272a9611158a26a83fede7550bba3f367e
Signed-off-by: Matej Klotton <mklotton@cisco.com>
|
|
- replace nc to socat for comunicating with qemu QGA
- change disk type to use virtio driver
- add check to bind only network interface for testpmd
Change-Id: I19ab16cbd8fec1ec78263ccfb1309a144e5af845
Signed-off-by: Matej Klotton <mklotton@cisco.com>
|
|
Change-Id: I6a2fc503989576f806413ae98845e3e3676889b8
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I864f97b4559fc1d692bfba80266150a3d06dd6bb
Signed-off-by: Matej Klotton <mklotton@cisco.com>
|
|
Change-Id: Id13c7fd51e693a273637c80cb35a159434be4826
Signed-off-by: Tibor Frank <tifrank@cisco.com>
|
|
- update low level ACL based on yang model changes
- remove ietf-ACL test suite and test data and keywords
- add ACL-plugin test suite, test data and keywords
The ietf model of ACLs is no longer supported in Honeycomb. It has
been replaced by the ACL plugin.
Change-Id: Ic2c2a3e11c9717d1d3885275f6b868a0098343f9
Signed-off-by: selias <samelias@cisco.com>
|
|
- add protocol value to expected VAT data
- add protocol value to snat_static_mapping_dump parser
- add temp workaround for returned "error:misc" on Ubuntu14.04
Change-Id: I42776b62b04eac65d03dcae1ec6a386a765b2e52
Signed-off-by: selias <samelias@cisco.com>
|
|
Some VAT commands return "error:misc" in addition to their normal
JSON output. This causes the JSON parser to complain about extra data.
Change-Id: I0da9739f371998dd6e2e6d6f70c1e8a3d82b6350
Signed-off-by: selias <samelias@cisco.com>
|
|
- print list of VAT commands executed per DUT node during the test
case in the func test teardown
Change-Id: I18a750ebfb7560eff9f5c4f0826ef84c3f64b4a8
Signed-off-by: Jan Gelety <jgelety@cisco.com>
|
|
Change-Id: I982834de1fbe71cf5303808ea58d4b58e530ffcb
Signed-off-by: Tibor Frank <tifrank@cisco.com>
|
|
Change-Id: I8b918a3c1d8109fb64bfdeec8e5c9afe45a86d21
Signed-off-by: pmikus <pmikus@cisco.com>
|
|
Change-Id: Iff42549e3be610c88b7a7d5518ef2cbb88c75ed2
Signed-off-by: Tibor Frank <tifrank@cisco.com>
|
|
Change-Id: Ib5a1e207f1dec99747329a755c3c365fef4bd64c
Signed-off-by: Tibor Frank <tifrank@cisco.com>
|
|
- original commit at https://gerrit.fd.io/r/4683
Change-Id: I0b2d77f66830fbbc2d27e9015ec67ea9cd9a9885
Signed-off-by: selias <samelias@cisco.com>
|
|
- remove EXPECTED_FAILING tag from IPv4 neighbor, IPv6 address, MTU
- fix bridge domain removal with interfaces assigned, it should fail
- fix teardown of L2 FIB suite (bridge domain removal, see above)
- disable vhost-user "server" test cases (VPP bug)
- fix keyword verifying sub-interface state
- update ACL test data (yang model changes)
- remove EXPECTED_FAILING tag from ACL table removal test
- update Jira IDs and comments in failing Lisp test case
- remove EXPECTED_FAILING tag from Lisp removal test case
- use vhost-user "client" instead of "server" in persistence tests
Change-Id: I32eafb6013b4512090c0d9365e10c61029179d49
Signed-off-by: selias <samelias@cisco.com>
|
|
- add workaround for mismatched jvpp versions in deb packages
- disable NSH_SFC madule and test suite, it depends on outdated jvpp
- cleanup package download script used in hc2vpp-csit-verify job
Change-Id: I98526baa4de08bbbab2339c9e81f49cd189b57ac
Signed-off-by: selias <samelias@cisco.com>
|
|
Change-Id: Ic16f91beabdc2ac2e19ccc65c04790d36c15d477
Signed-off-by: Matej Klotton <mklotton@cisco.com>
|
|
Change-Id: I996847a4871ed994cd9b5edb459fb079ff39c86d
Signed-off-by: Fangyin Hu <fangyinx.hu@intel.com>
|
|
- add NAT test suite
- add keywords and methods for configuring and reading NAT settings
- add test data used in NAT suite
Change-Id: Iaa2ac1eb156bc9bcff41ec242318f6a973210d38
Signed-off-by: selias <samelias@cisco.com>
|
|
Change-Id: Iad743b3c0e2d1b57e7c6bcae521fe958fbb06ced
Signed-off-by: selias <samelias@cisco.com>
|
|
There is an issue that booting Nested VM is successful but
QGA guest-ping or flush returns partial response. This fix suppose
to do checking until an error or timeout occurs. In case of QGA
returns correct response it is success. In case of partial
response it will log an error and continue in checking.
Change-Id: Idb2c5e5ea54bfc1e118ff62dd15696a1797dfdd9
Signed-off-by: pmikus <pmikus@cisco.com>
|
|
- fix Map.py
Change-Id: I0241e655df12f8135884e48d14c8eea43c501323
Signed-off-by: pmikus <pmikus@cisco.com>
|
|
- add Lisp test suite
- add Lisp test data
- add keywords and methods used in Lisp tests
Change-Id: Ie7819e20cf48e7dac106d60cce316ce69ab75786
Signed-off-by: selias <samelias@cisco.com>
|
|
When comparing multi-level JSON trees, the exceptions raised
carry more useful information.
Keys and values not present in reference data are ignored.
No longer puts chunks of honeycomb's log file into robot report. The
entire log file will be archived after https://gerrit.fd.io/r/4171
Change-Id: Ib597080fa3d9b2c43463c76ee0d52f317ea072e7
Signed-off-by: selias <samelias@cisco.com>
|
|
- Fix PyLint errors
- Fix comments in touched python modules
Change-Id: I26db2d292a41969cf38b9b0bdd49c4fb15349102
Signed-off-by: Tibor Frank <tifrank@cisco.com>
|
|
Change-Id: I392eac7404d5e1793a7de9d7a44b9defb89e7b9d
Signed-off-by: selias <samelias@cisco.com>
|
|
There is an issue that booting Nested VM is successful but
QGA guest-ping returns partial response. This fix suppose to
do checking until an error or timeout occurs. In case of QGA
returns correct response it is success. In case of partial
response it will log an error and continue in checking.
Change-Id: I8a2469287abaa9398a9206988e579912840f20c4
Signed-off-by: pmikus <pmikus@cisco.com>
|
|
Add option to configure CFS scheduler priority for VPP
Change-Id: Id358ebe41d7e868fd412d554d886567f81894b86
Signed-off-by: pmikus <pmikus@cisco.com>
|
|
Add multi-queue support when starting qemu. Full implementation
will be following in near future.
Change-Id: I743bbde67254b26a4e4e98072bad57dde728845a
Signed-off-by: pmikus <pmikus@cisco.com>
|
|
Reading information from sysfs or proc files is randomly failing
returning empty string without any error.
This fix suppose to add the retries to read the hugepages
information multiple times and raise exception if reading failed.
Change-Id: I7c88504765c39b11c81f7a8e77e5b0e32b7225fe
Signed-off-by: pmikus <pmikus@cisco.com>
|
|
- add port mirroring test suite
- add relevant keywords
Change-Id: I4ff398dd2ab4323e2a53af2812bf07cbb7043252
Signed-off-by: selias <samelias@cisco.com>
|
|
- outdated due to HC project change - split to honeycomb and hc2vpp
Change-Id: If9e3c9baf7787067eff6a759be1ad9aa386c6e0f
Signed-off-by: selias <samelias@cisco.com>
|
|
Rework PBB tests to account for changes in:
https://gerrit.fd.io/r/2520
https://gerrit.fd.io/r/1833
Change-Id: Id18027c23e57180b76c8478b010a4e3a69a75e43
Signed-off-by: selias <samelias@cisco.com>
|
|
- See resources/tools/doc_gen/README.rst for details
Change-Id: Ie5704c93a41e456d65fcd6df2d9d8c96987deebb
Signed-off-by: Tibor Frank <tifrank@cisco.com>
|
|
- add keyword to enable optional modules in Honeycomb (including NSH)
- update honeycomb __init__.robot with the new keyword
- add python and robot libraries for NSH tests
- add NSH test suite (CRUD operations)
Change-Id: I869069a138a51d56d25522163c3a6deefb316f46
Signed-off-by: selias <samelias@cisco.com>
|
|
- Fix documentation to be comliant with sphinx
- Fix pylint errors
Change-Id: I64acaa6c330c5a3b2975efc4120260813a2b3a92
Signed-off-by: pmikus <pmikus@cisco.com>
|
|
Change-Id: I6ea568e15e5c5b3ec6d3fd1977fb5d4a5ce17484
Signed-off-by: pmikus <pmikus@cisco.com>
|
|
As of change https://gerrit.fd.io/r/3816, ip_address_dump returns
IP addresses properly.
Change-Id: If3b4a32e5166bd517beaa2ddb35262c406b1dcea
Signed-off-by: selias <samelias@cisco.com>
|
|
Add option to configure CFS scheduler priority for QEMU
Change-Id: I76da7f536e70a23a57cf5215ab60002f95532b19
Signed-off-by: pmikus <pmikus@cisco.com>
|
|
- set Honeycomb log level to TRACE before running Honeycomb tests
- on a failed restconf request, print the last few lines of the log
- show saved configuration during persistence suite restarts
Change-Id: I07ee37a5403cfca946fd7ef25a42861273248fbe
Signed-off-by: selias <samelias@cisco.com>
|
|
Modify VxLAN test cases to account for changes in Honeycomb.
Change-Id: If2db55548b5472350d128bdfbb5bdd5289e1deef
Signed-off-by: selias <samelias@cisco.com>
|
|
This test setup and teardown is aimed to be used with all functional
tests.
It does not include functionality to manipulate VMs (qemu).
Test setup includes:
- Setup all DUTs before test
- Save VPP PIDs
- Setup all TGs before traffic script
- Update All Interface Data On All Nodes
Test teardown includes:
- Show Packet Trace on All DUTs
- Show vpp trace dump on all DUTs
- Vpp Show Errors On All DUTs
- Check VPP PID in Teardown
Change-Id: Ifee0bd58b7865442c5b510852908fd8363e3c543
Signed-off-by: Tibor Frank <tifrank@cisco.com>
|
|
Issue retrieving numa node of NIC
Change-Id: Ia6f826c100a012b23e046e48fe1e505ed0c4c8e8
Signed-off-by: pmikus <pmikus@cisco.com>
|
|
- tag all not-implemented features with EXPECTED_FAILING
- add workarounds for known issues with VAT dump commands
- replace hardcoded test data with parametrized
- separate IP neighbor and IP address into two test cases
- support unordered lists with compare_data_structures keyword
Change-Id: I2c683162325cee720ba496489787fa50e9c72b8c
Signed-off-by: selias <samelias@cisco.com>
|
|
- encryption/integrity key update tests
Change-Id: Iddbe35e2f421b5048e60663bff2b0bf1968a9782
Signed-off-by: Patrik Hrnciar <phrnciar@cisco.com>
Signed-off-by: Matej Klotton <mklotton@cisco.com>
|
|
Systemd first send SIGTERM and wait 90s (default value)
to send SIGKILL to terminate the vpp service.
Change-Id: Ia582cfdc4bebc5d3530e82692856fe733d0b001e
Signed-off-by: Miroslav Miklus <mmiklus@cisco.com>
|
|
- Update TRex to v2.09
Change-Id: I53221aff346840e0438dd1385cedd1db57ca5f3b
Signed-off-by: pmikus <pmikus@cisco.com>
|
|
- Switch Qemu binary to default path and remove building qemu in performance jobs
Change-Id: I5e8bb510beb672d034699192a7c454c56f2d2581
Signed-off-by: pmikus <pmikus@cisco.com>
|
|
- add test cases for:
L4 port range ACLs
multiple classify rules
L2 ACL on egress interface
- add L4 configuration to mixed ACL test
- add test variables for new test cases
- update HTTPRequests to treat code 201 as a positive response
Change-Id: If43007545fec174af12dab594f8a1b15b2e4a536
Signed-off-by: selias <samelias@cisco.com>
|