aboutsummaryrefslogtreecommitdiffstats
path: root/resources/libraries/robot/ip
AgeCommit message (Collapse)AuthorFilesLines
2022-08-16fix(robot): replace Run Keyword UnlessVratko Polak2-17/+17
Use Run Keyword If, with the condition negated. This silences the deprecation warning seen since Robot version bump. Change-Id: I9a88ff551994df3e129d71327f08207133a958a6 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2022-02-16chore(api): use the non-deprecated nat init callVratko Polak1-2/+3
Change-Id: Ic1949c46aa339e66a47a0ebbc428499c5cf9305e Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2021-06-17Core: Rework CPU allocationpmikus1-1/+1
Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I6826add7b3032041632c3952c45a3c64409400b0
2021-06-10FIX: Pylint reducepmikus2-2/+2
Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I909942dbb920df7f0fe15c0c92cda92c3cd8d8ad
2021-03-23Geneve: Re-write the creation of tunnels in pythonTibor Frank1-37/+4
Change-Id: I8b20134ad10abd9c021270b98c3110bd186946d5 Signed-off-by: Tibor Frank <tifrank@cisco.com>
2021-02-05NAT44ed: Add pure throuhput bidir testsVratko Polak1-5/+5
+ With ramp-up, without reset, with session verification. + Uses the same profile as pps tests. + Ramp up duration is not specified, as duration is computed. + Timeout tracking with automated ramp-up. + Correct computation of next duration. + Checking both early and late sessions. + No loss measurement also acts as a ramp-up. + Return ReceiveRateMeasurement from send_traffic_on_tg_internal, as that is needed for detecting whether trial is ok as ramp up. - Udp needs quite low ramp-up rate after recent regression. - Max scale has higher rate (so failing) to avoid session timeouts. + Bump copyright year. Change-Id: I50c928659cd5b985b490a2e5fb69c5cd790600b0 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2021-01-14perf: GENEVE tunnel test, l3 modeJan Gelety1-2/+2
Jira: CSIT-1768 Change-Id: I888ae1a5754fa07297d4cdf65c2be0e3e49d89a5 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-12-21fix: geneveJan Gelety1-3/+3
Change-Id: I23541e1c07a42b4baa560c343ffeed3b963fe694 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-12-03vpp-device: GENEVE tunnel test, l3 modeJan Gelety1-0/+74
Jira: CSIT-1769 Change-Id: I98510cd8e627d7347f77d0032b7bac28f2e36c61 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-12-08Revert "vpp-device: GENEVE tunnel test, l3 mode"Peter Mikus1-74/+0
This reverts commit a9f54ca5080aeef17686f300a6807bf9b46b7c90. Reason for revert: DO NOT MERGE BROKEN TESTS!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! https://logs.fd.io/production/vex-yul-rot-jenkins-1/csit-vpp-device-master-ubuntu1804-1n-skx/9918/archives/log.html.gz Change-Id: I2ce2970a43e5dd7487eeb54d1ccbb149e06cf8fa Signed-off-by: pmikus <pmikus@cisco.com>
2020-12-03vpp-device: GENEVE tunnel test, l3 modeJan Gelety1-0/+74
Jira: CSIT-1769 Change-Id: I0ab906966f760b809b8431530c010a8f0835d62c Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-10-29Support existing test types with ASTFVratko Polak1-2/+25
+ Add UDP_CPS, TCP_CPS, UDP_PPS and TCP_PPS suites. + Update existing cps traffic profiles. + Add missing traffic profiles. + UDP: + Single burst of 32 packets was confirmed as safe enough for TRex. + Maybe 64 could work, but not enough testing for that. + Multiple bursts have lead to reduced TRex performance, as overlaping bursts (from different client instances) tend to fill up the buffers. + TCP: + Data size set to 11111 bytes, completely arbitrarily. + Results look reasonable, so I have kept that. - MSS not set at all - No tested support for frame size other than 64B. - Frame size does not even factor into TCP profiles. + So other frame sizes are skipped in autogen. + Update tags in related suites. - HOSTS_{n} and SRC_USER_{n} should be unified. - Questionable clarification on difference between IP4BASE and SCALE. + Add NAT state resetters to tests that need them. + Resetter is called (if set) before each measurement. + If ramp-up is detected, resetter is not set. + Rename "mult" argument to "multiplier". + Abstracted from packets to transactions. + Transaction corresponds to profile. + TRex multiplier argument sets target rate in transactions per second. + The familiar STL traffic: + Bidirectional is considered to be 2 packets per transaction. + Unidirectional is considered to be 1 packet per transaction. + The newer ASTF traffic: + 4 subtypes, each has different number of packets per transaction. + For max rate computation: + Packets in the more numerous direction are considered. + Rely on TRex reported traffic duration for ASTF: + Use the server side value. - Client side value is higher by an overhead. - TRex is not sending traffic during that time. + Remove delays from traffic profiles. - Those delays would increase the reprted traffic time. + Support for scale lmited trials. + Only for ASTF profiles, each ASTF profile has limited scale. + Scale defined in suite variables. + For TRex to send all transactions provided duration value is ignored. + The appropriate value is computed in TrafficGenerator. + An ad-hoc time constant is added to match the TRex client side time overhead. + The profile driver receives the computed duration. + Measurement for PLRsearch add a sleep if the computed duration is smaller. + Alternative argument for search algos if scale is limited. + Both need higher timeout to accomodate big scales. + MLRsearch can afford fewer phases. + Added a parameter to optionally shorten the duration. + Use short duration for runtime stats trial and failure stats trial. + Use very large keepalive values in udp profiles to avoid ka packets. + No polling in ASTF profile driver. - Polling could eliminate the time overhead value. + But polling proved to introduce some loss, affecting the results. + Handle duration stretching in ASTF by stopping traffic. + The stop has several steps so that: + The traffic is really stopped entirely. + Late packets do not count (maybe as errors). + Stats are preserved to read for results (and cleared afterwards). + Several quantities added to ReceiveRateMeasurement: + Original target duration is preserved (algos need that). + Input estimate (tps) for early search iterations. + Output estimate (maybe pps) for MRR output. + Strict result (unsent counts as loss) for NDR. + Use L2 counters (opackets, ipackets) where possible. - TRex has trouble processing packets for the L7 ones at high loads. + Remove warmup from profile drivers and keywords. + Suites should call "Send ramp-up traffic" explicitly if needed. + Added parsing for few more counters. + Both to use in formulas or just for debug purposes. - Only 64B cases in autogen, framesize support to be added later. + Latency streams during search can be enabled via PERF_USE_LATENCY env var. + MLRsearch improvments: + Rename argument names to min_rate and max_rate. + Use relative receive rate in initial phase. + PLRsearch improvements: + Careful computation when output (pps) does not match input (tps). + Use geometric distribution (instead of Poisson). + Helps agains math errors. + This should improve estimate stability. - But in practice big losses still lead to significant jumps. + Traffic generator improvements: + send_traffic_on_tg now calls the full set_rate_provider_defaults. + _send_traffic_on_tg_internal for the logic without provider defaults. + As the internal function is re-used by measure() without affecting defaults. + Move _parse_traffic_results just before get_measurement_result. + As the latter uses fields set bu the former, it is now easier to read. + Multiple sources for approximate duration. + Tried from more precise to more available. + Includes logic for _pps tests (added in later change). + Move explicit type conversions to earlier occurences. + Profile driver output field uses semicolons to simplify parsing. + Performance Robot lib file split to several smaller ones. + performance_actions.robot: + Hosts Additional Statistics Action For * keywords. + performance_display.robot: + Hosts keyword for displaying and verifying results. + Change test message to use the correct unit (pps or cps). + performance_limits.robot renamed to performance_vars.robot + Added many keywords, mostly for accessing test variables. + Moved variables for Policer into a new keyword there. + Some keywords need sophisticated logic. - Other are basically Get Variable Value. + But in future more logic can be added, without editing callers. + Documentation for the new keywords acts as a documentation for test variables. + performance_utils.robot has the rest. + Eliminated arguments if the value is in test variable. + Small improvements to documentation. - Still not enough cleanup with respect to arguments and test variables. + Keywords are sorted alphabetically now in each one. + Suites: + Unified variables table: + No colons in comments. + ${n_hosts}, ${n_ports} and use them instead hardcoded numbers. + Add -cps to existing cps suite names. + Remove "trial data overwrite". + Compute max rate as in STL suites. + Each NAT suite has ip4base suite to compare results to. - Those act as indirect TRex calibration. - VPP does not lose packets in those. + Latency in ASTF suites is disabled hard. - As we do not support latency in ASTF profiles yet. + Unidirectional tests governed by suite variable, not an argument. + Write long argument lists vertically. + Prefer to use argument names. + In Python, also the last argument is followed by comma. + It makes renaming and reordering easier. + Similarly applies to prints with long lists of values. + A TODO to update api crc file comments. Change-Id: I84729355edbec051298a9de1162107f88ff5737d Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2020-10-29tests: Add GSO enabled testsMartin Balaz2-1/+13
Change-Id: I409b060f64ae7c6787448ae519fd76d8384e9ffb Signed-off-by: Martin Balaz <martin.balaz@pantheon.tech>
2020-10-23CSIT-1597 NAT44 API: dynamic configJan Gelety1-0/+3
- cover API changes in VPP: https://gerrit.fd.io/r/c/vpp/+/29463 - update vpp stable to version 21.01-rc0~283-g5f4f2081c Change-Id: I079c10e4537448c3b078f22c3fe4ed266a5e2e2c Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-10-19FIX: disable sending IPv6 RA messages from VMsJuraj Linkeš1-4/+4
There were occasional Router Advertisement packets received in a Traffic Generator in VM testcases. Fix by adding config that disables sending IPv6 RA messages on interfaces in VM VPP config before enabling them. Also rename related keywords and change descriptions based on https://docs.fd.io/vpp/21.01/db/d4c/clicmd_src_vnet_ip6-nd.html#clicmd_ip6_nd Change-Id: I1c2a33337ac91f6039d287b4c2aac388e3a52383 Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
2020-09-12Test: Add ramp-up phase to nat44ed-udir testsJan Gelety1-1/+33
Change-Id: I3aa50ec1ef9b0445014daa31e767323060f4a03f Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-09-30Framework: Add possibility to send ramp-up trafficJan Gelety1-0/+6
Change-Id: Ie24184ca4ac2d6c7abc32f0f103e10bc402ad93b Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-09-24test: nat44det - add session number checkJan Gelety1-0/+17
- some tests need to reduce rate for ramp-up phase - some tests need to extend trail duration in ramp-up phase - removed 2n1l-10ge2p1x710-ethip4udp-nat44det-h1-p63-s63 suite as nat out ports are randomly selected from available port range so T-Rex stateless is not able to provide required out2in traffic Change-Id: I1145496610d202f81d911e68aa819844d7600918 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-09-07VPP-DEV API COV: Add NAT44-ED testsJan Gelety1-1/+1
Jira: CSIT-1755 Change-Id: I34baa22a49f44da3fa80d91fa2f4132c982fe610 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-08-08Fix: NAT44 deterministic moved to separate det44 pluginJan Gelety1-43/+83
- align CSIT code with VPP code changes for NAT44 deterministic (DET44) feature - align test names according to snat44ed tests - remove obsolete 3-node nat tests - remove 2n1l-10ge2p1x710-ethip4udp-snat44det-h1048576-p63-s66060288 tests (not enough memory for such high number of sessions) Change-Id: I9a22b99b4cfa56d18e9c7ef9c58296e202567d42 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-08-20Fix: Use new-style interface variablesVratko Polak1-2/+2
The old-style variables contain None in some places, mainly in SRv6 proxy tests. Change-Id: If3887a7dba051454c504b345a6a316d5d69d0139 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2020-08-07Perf: NAT44 endpoint-dependent mode - udp, part IJan Gelety2-71/+69
- continuation of https://gerrit.fd.io/r/c/csit/+/26898 as there was reached limit of changes (1000) Jira: CSIT-1711 - udp synthetic profiles w/o data packets - udp cps perf tests, phase I (no special "search cps" KW) Part I means that we are using MRR tests to collect traffic data until there is ready new CPS test type with corresponding algorithm. Change-Id: I0d30feb9ecf1d0bff937152656f8eb422f831378 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-07-23T-Rex: Add advanced stateful modeJan Gelety1-4/+4
- provide base routines to run T-Rex in advanced stateful mode Change-Id: Ib0dc5f2919c370753335f6446860683dc4b12d93 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-06-10NAT44 EI testsMaros Mullner1-18/+46
Signed-off-by: Maros Mullner <maros.mullner@pantheon.tech> Change-Id: Ib5f58f60a1409ed139e2846793bf52fdc02a6571
2020-06-03FIX: IP4 IP6 3n-onlypmikus2-3/+3
ARP not resolved as ARP plugin is not in use. Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I655d39794f99e32a2f3905154d78e83853356ccf
2020-05-06FIX: dot1q-ip6pmikus1-1/+1
Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: Ied48646bd9de41e5a55e0006440d057c5fddf694
2020-04-27FIX: NAT44 3-node testsPeter Mikus1-1/+1
Signed-off-by: Peter Mikus <pmikus@cisco.com> Change-Id: I3d9074175e1aaf5afba4e351790644df4ad33914
2020-04-23Fix 3n ip4 scale initVratko Polak1-1/+1
Last argument to Vpp Add Ip Neighbor should be a MAC address. Change-Id: Ia93ddf68aa2b8647c66b6a72210db3a8a01b81fb Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2020-03-31FIX: ip4Jan Gelety1-1/+1
Change-Id: I57fcb06c72caf517231f09478d9d6089d2f46af4 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-04-06Improve pf layerPeter Mikus3-135/+181
+ Merge single/double link + Introduce _pf{n}[0] variables so we can access physical function same way as virtual function + Cleanup code by moving complex logic to python + Prepare code for multiple vf functions Signed-off-by: Peter Mikus <pmikus@cisco.com> Change-Id: Ic2e74a38bfa146441357de8f0916aeb638941c49
2019-11-28Python3: resources and librariesJan Gelety3-117/+122
Change-Id: I1392c06b1d64f62b141d24c0d42a8e36913b15e2 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2019-09-05FIX: Use vhost macs when testpmd_mac forwarding used in VMJan Gelety1-8/+52
Change-Id: I291c3dc852e7c1bde6fb6102a9168cfec9992682 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2019-08-12Clean: Various librariesPeter Mikus2-1/+143
- Remove translate TC as they have no perf opposite - Remove unused keywords - Merge similar keywords / rename - Move keywords from perf library to categories Signed-off-by: Peter Mikus <pmikus@cisco.com> Change-Id: I6433006136e2497ad8fb17193aa20c578d836999
2019-08-09Clean: L2 bridge domainPeter Mikus2-4/+4
Signed-off-by: Peter Mikus <pmikus@cisco.com> Change-Id: I3721900b91a9c8e9db8766bdcb9771b6bcf95bca
2019-08-09Clean: Interface KeywordsPeter Mikus1-312/+0
Signed-off-by: Peter Mikus <pmikus@cisco.com> Change-Id: Ideddcea56120cf770aec78ca24813baf7d05ba11
2019-08-07Clean: IPv6 keywordsPeter Mikus1-6/+200
+ Move all base ipv6 related KW to library + Remove useless KW to save space in output.xml + Remove cross dependency in ip6.robot Signed-off-by: Peter Mikus <pmikus@cisco.com> Change-Id: I8c5f72e9852c1017356ab6034c4d271cf7b53265
2019-08-07Clean: IPv4 keywordsPeter Mikus1-17/+511
+ Move all base ipv4 related KW to library + Remove useless KW to save space in output.xml + Remove cross dependency in ip4.robot Signed-off-by: Peter Mikus <pmikus@cisco.com> Change-Id: If1e3a6370d36caf4ce7411fb956a0b7d0f939b6b
2019-07-29Remove obsolete L2 KWPeter Mikus2-467/+0
Change-Id: I9a8aa6f5ccf95d632f4e677c8bf14f50b982d930 Signed-off-by: Peter Mikus <pmikus@cisco.com>
2019-06-19VAT-to-PAPI: NATUtilTibor Frank1-78/+0
Change-Id: Id64bbf899e78c7c55410a8ce608393c22fa596ab Signed-off-by: Tibor Frank <tifrank@cisco.com>
2019-06-18CSIT-1459: Migrate IP libraries from VAT to PAPIJan Gelety2-313/+38
Change-Id: Id84cf9c3afd53260b5bbf658a6a3870aa0c91333 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2019-05-31CSIT-1468: InterfaceUtil migration from VAT to PAPIJan Gelety2-0/+28
Change-Id: I0062710d58996be767a852dc00545fedd60a5c72 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2019-05-09Remove old VPP Restart sequencePeter Mikus1-1/+3
Change-Id: I7f71a9709ad55ce03d73e23cc8a9f5064947ed51 Signed-off-by: Peter Mikus <pmikus@cisco.com>
2019-01-24FIX: correct call of vpp_add_routeJan Gelety2-26/+38
Change-Id: I63a2b5f484ac627c020e30c9f01a868c57aacf42 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2018-12-19FIX: Avoid duplicated KW names in perf and func testsJan Gelety2-28/+28
Change-Id: I66c68edf6e26fa7baa7bdc5f5d60d4d4aa3af6b9 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2018-12-18FIX: do not use dump stats in IPv6 base testsJan Gelety1-5/+0
Change-Id: I9983b4aa1d6575f017bdfd69b6ab3b26206d9605 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2018-12-07VPP_Device - add baseline tests - part IJan Gelety2-64/+478
CSIT-1370 Add following baseline tests to VPP_Device: - ip4 eth2p-ethip4-ip4base-dev - ip6 eth2p-ethip6-ip6base-dev - l2bd eth2p-eth-l2bdbasemaclrn-dev Change-Id: Ic20000eb38c5511c27d020f3aa76b2620d7f7ef9 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2018-10-10Add VXLAN scale perf testsJan Gelety1-0/+7
Jira: CSIT-1273 Change-Id: Ic2a41661c158384a5aaa7d4e73f30ffca13ddf82 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2017-09-08CSIT-665: Re-write L1 robot keywords in pythonDasa Simkova1-12/+14
Change-Id: Iddd823375ddd17b9abd5f02ee3aea3bfcb625149 Signed-off-by: Dasa Simkova <dspropagacie@gmail.com>
2017-08-28FIX: SNAT -> NAT renaming of APIPeter Mikus1-33/+32
- Based on https://gerrit.fd.io/r/#/c/8146/ Change-Id: I774483c7e2b419a9b9b6be78812ecf53a5c91eab Signed-off-by: Peter Mikus <pmikus@cisco.com>
2017-06-29CSIT-687: Directory structure reorganizationTibor Frank4-0/+817
Change-Id: I772c9e214be2461adf58124998d272e7d795220f Signed-off-by: Tibor Frank <tifrank@cisco.com> Signed-off-by: Maciek Konstantynowicz <mkonstan@cisco.com>