aboutsummaryrefslogtreecommitdiffstats
path: root/resources/libraries/robot/shared/default.robot
AgeCommit message (Collapse)AuthorFilesLines
2024-03-14feat(tests): Fix scaling of 6p3nicoper-240318pmikus1-4/+4
Signed-off-by: Peter Mikus <peter.mikus@protonmail.ch> Change-Id: I84d9cf2892423e62b116b07982d3e87120b66271
2023-09-21feat(core): Multilink backendpmikus1-0/+1
Signed-off-by: pmikus <peter.mikus@protonmail.ch> Change-Id: I8d168979ab9722e0056e97edb228f29cbfa245e3
2023-08-11feat(core): QAT initialization refactorpmikus1-23/+0
Signed-off-by: pmikus <peter.mikus@protonmail.ch> Change-Id: Idc91da55ab0b5c6b8eb53e8b4ce4da18a1ae891c
2023-08-04fix(core): QAT VF bindpmikus1-1/+1
Signed-off-by: pmikus <peter.mikus@protonmail.ch> Change-Id: Iafae1a1f538b928d3bb80bf9610a0bf7de646f8a
2023-07-27fix(core): QAT initializationpmikus1-0/+1
Signed-off-by: pmikus <peter.mikus@protonmail.ch> Change-Id: I28af64b7d39a97bbb84f9d987a3f5d3a2d02701b
2023-07-27feat(core): Core allocationpmikus1-7/+20
Signed-off-by: pmikus <peter.mikus@protonmail.ch> Change-Id: I782b87190dbee6e0a12c97f616b80539cd6614bd
2023-06-16Add cryptodev device 4xxxYulong Pei1-2/+2
QAT_4xxx is integrated QAT device on SPR platform. Signed-off-by: xinfeng zhao <xinfengx.zhao@intel.com> Signed-off-by: Yulong Pei <yulong.pei@intel.com> Change-Id: If1d4b3d72a2c66855ac8c1c42516f0cb78bdfab2
2023-05-10feat(infra): Remove system.d dependencypmikus1-4/+3
Signed-off-by: pmikus <peter.mikus@protonmail.ch> Change-Id: Icb7b6124dcba7bb57c18ceb91120284f6fe02c2e
2022-12-06feat(model): Cleanup and introduce telemetrypmikus1-1/+1
- Due to divergence from original design path the RAW was never consumed. It adds too much code complexity and requires processing on both storage and compute. Removing entirely to make modeling efficient. - log (apparently SSH) section will never be consumed in the way it is coded in model. This section is also not part of model schema itself due to the point above. - Introducing telemetry section that is going to carry telemetry items required for CDash. Signed-off-by: pmikus <peter.mikus@protonmail.ch> Change-Id: I7e0256c6c9715de8ee559eed29dce96329aac97d
2022-06-14fix(vlan): do not apply strip offloadVratko Polak1-18/+0
Some tests (bonding) are failing as VPP refuses startup.conf. That is because the config parameter support has been removed: https://gerrit.fd.io/r/c/vpp/+/34822 That is VPP commit 8c8531c15c9195c2c82695eff6e70887de67fd88. According to commit message, it was just a workaround for Cisco ENIC cards, which are no longer tested in CSIT. + Delete 1 robot and 1 python keyword as they become unused. Change-Id: If53e324a27cfbd4659e49ab8bcd03253642dde96 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2022-05-24fix(uti): Add TG type exportPeter Mikus1-10/+0
- This is actually bug not a feature. - AB to be added later - Tested on TREX and iPerf3 Signed-off-by: Peter Mikus <pmikus@cisco.com> Change-Id: Ib6f2d13e3b9401a9fb5759e42a8a310ee11b9d41
2022-04-05VppConfigGenerator: disable vpp cli pagerDave Wallace1-1/+2
- Robot framework logs contain 'show pci' output from VPP that is truncated due to the VPP cli pager. Add UNIX cli-no-pager configuration to the default startup config to fix this issue. Signed-off-by: Dave Wallace <dwallacelf@gmail.com> Change-Id: I80f2cd045063245098f22eb638a9796c5031fecf
2021-12-15UTI: Export resultsVratko Polak1-0/+11
+ Model version 1.0.0. - Only some result types are exported. + MRR, NDRPDR and SOAK. - Other result types to be added later. + In contrast, all test types are detected. + Convert custom classes to JSON-serializable equivalents. + Sort dict keys before converting to JSON. + Override the order for some known keys. + Export sets as sorted arrays. + Convert to info content from serialized raw content. + Also export outputs for suite setups and teardowns. + Info files for setup/teardown exist only temporarily. + The data is merged into suite.info.json file. + This simplifies presentation of total suite duration. + Define model via JSON schema: - Just test case, suite setup/teardown/suite to be added later. - Just info, raw to be added later. + Proper descriptions. + Json is generated from yaml. + This is a convenience for maintainers. + The officially used schema is the .json one. + TODOs written into a separate .txt file. + Validate exported instance against the schema. + Include format checking. + Update CSIT requirements for validation dependencies. + This needs python-dateutil==2.8.2, only a patch bump. + Compute bandwidth also for soak tests. + This unifies with NDRPDR to simplify schema definition. - PAL may need an update for parsing soak test message. + Include SSH log items, raw output only. + Generate all outputs in a single filesystem tree. + Move raw outputs into test_output_raw.tar.xz. + Rename existing tar with suites to generated_robot_files.tar.xz. Change-Id: I69ff7b330ed1a14dc435fd0ef008e753c0d7f78c Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2021-12-01feat(Performance): Add 2M/1G hugepagespmikus1-2/+4
+ Add ability to switch between hugepages. Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I84d8eae28ed414a32e5ba82e6c9ed10d7f0ef9cb
2021-10-08Add flow test suitesxinfeng zhao1-0/+1
The comms DDP package needs to be installed to support all flow protocols Signed-off-by: xinfeng zhao <xinfengx.zhao@intel.com> Change-Id: I6ab1bd8beb9edb8c9889a0ed9a999080ca3cef3d
2021-08-24Telemetry: vpp devicepmikus1-28/+0
Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I80efb278cf824dd8b1d38bb3ff3df43366e7295a
2021-08-24Fix DPDK nb_cores allocationpmikus1-1/+1
+ Migrate the call to main python util Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I8d00165071d4764121740c1c77819b8ffc65b3ba
2021-06-17Core: Rework CPU allocationpmikus1-133/+19
Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I6826add7b3032041632c3952c45a3c64409400b0
2021-06-04Performance: Add AF_XDP testspmikus1-0/+1
- enabling for fortville, columbiaville - enabling experimental for mlx Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I1b7ceb54769f4a0089ac7309350499e60c5cca0a
2021-05-26rxq_ratio default value changed to 1viliam.luc1-2/+2
Change-Id: I0c973ceffc13f4f3c5f959d56cb0890b87091a82 Signed-off-by: Viliam Luc <viliam.luc@pantheon.tech>
2021-03-31Device: Add stats test with AVFVratko Polak1-0/+28
+ Extract the stats keyword into a library. Change-Id: Icfaaa32c2a97d479ba0339acf34b865006949a89 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2021-02-19Add test suites for crypto sw scheduler engineYulong Pei1-0/+23
This patch is to add test suites for vpp plugin crypto_sw_scheduler, IPsec sync mode is to do crypto and packet forward work in same worker cores, crypto_sw_scheduler can schedule crypto work to other async crypto cores to improve whole crypto processing capability. This test suites configure fixed 1 rx queues per port, then measure IPsec performance with 1, 2, 3 crypto cores. This patchset include 1, 2, 4, 8 ipsec tunnels test cases. +Vratko help to change to count total physical cores instead of previous only count crypto cores in test cases. Change-Id: I0e67182e3d13273890a23703d838101900e25126 Signed-off-by: Yulong Pei <yulong.pei@intel.com> Signed-off-by: Vratko Polak <vrpolak@cisco.com> Signed-off-by: pmikus <pmikus@cisco.com>
2021-02-19Framework: GSO testpmikus1-0/+69
Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I874568aebbe50c38e634438eb1201ca737bd18ad
2021-01-04API: deprecated COP APIsTomas Alexy1-1/+1
Signed-off-by: Tomas Alexy <tomas.alexy@pantheon.tech> Change-Id: Ifb97088a26f3c2ab2ecee28ed43e6e957a844c64
2021-01-04GSO: TAP/VHOST use casepmikus1-1/+2
Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: Ibafaaca4438587284d1e255c764f0701002941e8
2020-11-25Add rxq_thr optionpmikus1-1/+2
Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I46750f8571d86dc13df95252e8894c4b988efd5c
2020-10-29Support existing test types with ASTFVratko Polak1-1/+20
+ Add UDP_CPS, TCP_CPS, UDP_PPS and TCP_PPS suites. + Update existing cps traffic profiles. + Add missing traffic profiles. + UDP: + Single burst of 32 packets was confirmed as safe enough for TRex. + Maybe 64 could work, but not enough testing for that. + Multiple bursts have lead to reduced TRex performance, as overlaping bursts (from different client instances) tend to fill up the buffers. + TCP: + Data size set to 11111 bytes, completely arbitrarily. + Results look reasonable, so I have kept that. - MSS not set at all - No tested support for frame size other than 64B. - Frame size does not even factor into TCP profiles. + So other frame sizes are skipped in autogen. + Update tags in related suites. - HOSTS_{n} and SRC_USER_{n} should be unified. - Questionable clarification on difference between IP4BASE and SCALE. + Add NAT state resetters to tests that need them. + Resetter is called (if set) before each measurement. + If ramp-up is detected, resetter is not set. + Rename "mult" argument to "multiplier". + Abstracted from packets to transactions. + Transaction corresponds to profile. + TRex multiplier argument sets target rate in transactions per second. + The familiar STL traffic: + Bidirectional is considered to be 2 packets per transaction. + Unidirectional is considered to be 1 packet per transaction. + The newer ASTF traffic: + 4 subtypes, each has different number of packets per transaction. + For max rate computation: + Packets in the more numerous direction are considered. + Rely on TRex reported traffic duration for ASTF: + Use the server side value. - Client side value is higher by an overhead. - TRex is not sending traffic during that time. + Remove delays from traffic profiles. - Those delays would increase the reprted traffic time. + Support for scale lmited trials. + Only for ASTF profiles, each ASTF profile has limited scale. + Scale defined in suite variables. + For TRex to send all transactions provided duration value is ignored. + The appropriate value is computed in TrafficGenerator. + An ad-hoc time constant is added to match the TRex client side time overhead. + The profile driver receives the computed duration. + Measurement for PLRsearch add a sleep if the computed duration is smaller. + Alternative argument for search algos if scale is limited. + Both need higher timeout to accomodate big scales. + MLRsearch can afford fewer phases. + Added a parameter to optionally shorten the duration. + Use short duration for runtime stats trial and failure stats trial. + Use very large keepalive values in udp profiles to avoid ka packets. + No polling in ASTF profile driver. - Polling could eliminate the time overhead value. + But polling proved to introduce some loss, affecting the results. + Handle duration stretching in ASTF by stopping traffic. + The stop has several steps so that: + The traffic is really stopped entirely. + Late packets do not count (maybe as errors). + Stats are preserved to read for results (and cleared afterwards). + Several quantities added to ReceiveRateMeasurement: + Original target duration is preserved (algos need that). + Input estimate (tps) for early search iterations. + Output estimate (maybe pps) for MRR output. + Strict result (unsent counts as loss) for NDR. + Use L2 counters (opackets, ipackets) where possible. - TRex has trouble processing packets for the L7 ones at high loads. + Remove warmup from profile drivers and keywords. + Suites should call "Send ramp-up traffic" explicitly if needed. + Added parsing for few more counters. + Both to use in formulas or just for debug purposes. - Only 64B cases in autogen, framesize support to be added later. + Latency streams during search can be enabled via PERF_USE_LATENCY env var. + MLRsearch improvments: + Rename argument names to min_rate and max_rate. + Use relative receive rate in initial phase. + PLRsearch improvements: + Careful computation when output (pps) does not match input (tps). + Use geometric distribution (instead of Poisson). + Helps agains math errors. + This should improve estimate stability. - But in practice big losses still lead to significant jumps. + Traffic generator improvements: + send_traffic_on_tg now calls the full set_rate_provider_defaults. + _send_traffic_on_tg_internal for the logic without provider defaults. + As the internal function is re-used by measure() without affecting defaults. + Move _parse_traffic_results just before get_measurement_result. + As the latter uses fields set bu the former, it is now easier to read. + Multiple sources for approximate duration. + Tried from more precise to more available. + Includes logic for _pps tests (added in later change). + Move explicit type conversions to earlier occurences. + Profile driver output field uses semicolons to simplify parsing. + Performance Robot lib file split to several smaller ones. + performance_actions.robot: + Hosts Additional Statistics Action For * keywords. + performance_display.robot: + Hosts keyword for displaying and verifying results. + Change test message to use the correct unit (pps or cps). + performance_limits.robot renamed to performance_vars.robot + Added many keywords, mostly for accessing test variables. + Moved variables for Policer into a new keyword there. + Some keywords need sophisticated logic. - Other are basically Get Variable Value. + But in future more logic can be added, without editing callers. + Documentation for the new keywords acts as a documentation for test variables. + performance_utils.robot has the rest. + Eliminated arguments if the value is in test variable. + Small improvements to documentation. - Still not enough cleanup with respect to arguments and test variables. + Keywords are sorted alphabetically now in each one. + Suites: + Unified variables table: + No colons in comments. + ${n_hosts}, ${n_ports} and use them instead hardcoded numbers. + Add -cps to existing cps suite names. + Remove "trial data overwrite". + Compute max rate as in STL suites. + Each NAT suite has ip4base suite to compare results to. - Those act as indirect TRex calibration. - VPP does not lose packets in those. + Latency in ASTF suites is disabled hard. - As we do not support latency in ASTF profiles yet. + Unidirectional tests governed by suite variable, not an argument. + Write long argument lists vertically. + Prefer to use argument names. + In Python, also the last argument is followed by comma. + It makes renaming and reordering easier. + Similarly applies to prints with long lists of values. + A TODO to update api crc file comments. Change-Id: I84729355edbec051298a9de1162107f88ff5737d Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2020-10-29tests: Add GSO enabled testsMartin Balaz1-0/+1
Change-Id: I409b060f64ae7c6787448ae519fd76d8384e9ffb Signed-off-by: Martin Balaz <martin.balaz@pantheon.tech>
2020-10-19Tests: Remove GBPpmikus1-1/+0
- Specs - Tests - Library - TODO: PAL Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I8890940d56c7a9924d4a5f9365b6bb881610db14
2020-09-30Framework: main heap size value multiplicationJan Gelety1-1/+1
- default value for main heap size set to 2G - allow allocation of n x 2G in tests that need it Change-Id: I02dafe6bc61649d2823486a3e983f66f5a213a88 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-09-24test: nat44det - add session number checkJan Gelety1-1/+1
- some tests need to reduce rate for ramp-up phase - some tests need to extend trail duration in ramp-up phase - removed 2n1l-10ge2p1x710-ethip4udp-nat44det-h1-p63-s63 suite as nat out ports are randomly selected from available port range so T-Rex stateless is not able to provide required out2in traffic Change-Id: I1145496610d202f81d911e68aa819844d7600918 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-09-22Framework: Heapsize configurationpmikus1-3/+4
- https://gerrit.fd.io/r/c/vpp/+/28829 - https://gerrit.fd.io/r/c/vpp/+/28896 - ip6 to be added later Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I7b03b8ace5c5c7582d4a2f66bfd788a3ec80a916
2020-09-03Framework: Code aligmentspmikus1-2/+8
+ Unifying code structures - To easily plug another DUT + New PCI PassThrough templates + Improved perf stat on cores allocated in test. Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I325f17b977314f93cb91818feddfddf3e607eb8a
2020-08-07Perf: NAT44 endpoint-dependent mode - udp, part IJan Gelety1-36/+65
- continuation of https://gerrit.fd.io/r/c/csit/+/26898 as there was reached limit of changes (1000) Jira: CSIT-1711 - udp synthetic profiles w/o data packets - udp cps perf tests, phase I (no special "search cps" KW) Part I means that we are using MRR tests to collect traffic data until there is ready new CPS test type with corresponding algorithm. Change-Id: I0d30feb9ecf1d0bff937152656f8eb422f831378 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-06-30make graph node variant can be configured from gerrit triggerYulong Pei1-0/+1
for example, below will trigger VPP with default code path test in CSIT, "csit-2n-clx-perftest mrrAND64bANDnic_intel-xxv710ANDeth-l2bdbasemaclrnNOTdrv_avf" and below will trigger VPP with avx512 code path test in CSIT, "csit-2n-clx-perftest icl mrrAND64bANDnic_intel-xxv710ANDeth-l2bdbasemaclrnNOTdrv_avf" Change-Id: Id3abf932203ce00f34f8643c5bc4d5fc4d3e6efb Signed-off-by: Yulong Pei <yulong.pei@intel.com>
2020-05-04FIX: IPsecvagrant1-4/+0
Signed-off-by: Peter Mikus <pmikus@cisco.com> Change-Id: Iacd7aa49d9832233033fe18fc228ccd45c12b4db
2020-04-17FIX: Proper NUMA computePeter Mikus1-1/+1
+ FIX for Vratko's FIX Change-Id: Ia6ff137120d84bdd2b9e02e3e935c62d1c732b7b Signed-off-by: Peter Mikus <pmikus@cisco.com>
2020-04-17Fix numa detectionVratko Polak1-1/+1
On 3n-hsw, xl-710 is numa 1. The old code returned 0, causing performance regression. Fixes: 14a71b74b414df7616ccb5ada3d50ecb90d96bae Change-Id: I81d3f711b6a37438f6411e29baafae9dec1c00a4 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2020-04-06Improve pf layerPeter Mikus1-85/+15
+ Merge single/double link + Introduce _pf{n}[0] variables so we can access physical function same way as virtual function + Cleanup code by moving complex logic to python + Prepare code for multiple vf functions Signed-off-by: Peter Mikus <pmikus@cisco.com> Change-Id: Ic2e74a38bfa146441357de8f0916aeb638941c49
2020-01-28perf: hoststack iperf3 test tuningDave Wallace1-2/+1
Change-Id: I53425f57fe9ecef9cff2c94642cc7cb24537a961 Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2020-01-23FIX: Various issuesPeter Mikus1-0/+4
- TrafficProfile - IPsec jumbo - TDLK leftover - Trex scapy server Signed-off-by: Peter Mikus <pmikus@cisco.com> Change-Id: I0601ea75ed6e7318c46124fb02e9c61066089791
2020-01-15Hoststack perf infrastructure refactoringDave Wallace1-1/+26
- DUT only topology (hoststack test apps are co-located with vpp) - Make vpp app specific keywords generic where applicable - Add IP4 Prefix to topology file - Support running wrk in linux namespace - Refactor namespace cleanup - Remove redundant namespace creation code - Refactor test/keyword dirs: tcp -> hoststack - Add hoststack utility keywords - Refactor wrk suite setup/teardown - Update tests with recent perf infra changes Change-Id: Ia1cf07978d579393eef94923819a87c8c1f36f34 Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2019-12-11Introduce VPP-IPsec container tests.Ludovit Mikula1-3/+37
Change-Id: Ie64d662e81879bd52785e0188450d998bf056bda Signed-off-by: Ludovit Mikula <ludovit.mikula@pantheon.tech>
2019-12-03Remove: VIRLPeter Mikus1-28/+0
Signed-off-by: Peter Mikus <pmikus@cisco.com> Change-Id: I2b1672412e19f15cb46246fffa931351cd3d518b
2019-11-28Python3: resources and librariesJan Gelety1-44/+54
Change-Id: I1392c06b1d64f62b141d24c0d42a8e36913b15e2 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2019-11-13LIGATO: RemovePeter Mikus1-67/+0
Signed-off-by: Peter Mikus <pmikus@cisco.com> Change-Id: I0c9b8b07ed3a113e24a38faaddd5ed06fae67768
2019-10-25Introduce pre-initialize driver layerPeter Mikus1-217/+85
+ This will help unify driver base differences between TCs. + Decrease amount of logic needed for suite generator. Signed-off-by: Peter Mikus <pmikus@cisco.com> Change-Id: I1e84ba361dc1e829f0612c58a61096e2633ce0c5
2019-10-09Add vpp loadbalancer maglev mode test suitehaiyanX1.zhang1-0/+1
Change-Id: I61555ba566efef0a2151db9a30bf7f5d9ccad1df Signed-off-by: haiyanx1.zhang <haiyanx1.zhang@intel.com>
2019-09-26CSIT-1471: Policer - VAT API to PAPIpremkumarv1-1/+1
Change-Id: I6c7eff8d9cbb196ccb684a45579ac59942351cfe Signed-off-by: premkumarv <preym17@gmail.com>
2019-09-19LISP: 3-node (func) to 2-node (dev) converstionNidhy1-0/+8
Change-Id: I0fbe4d9ef1b30a1ac1382ea43b5b52aeb8a7d39f Signed-off-by: Nidhy <nidhyanandhan.a@hcl.com>