aboutsummaryrefslogtreecommitdiffstats
path: root/resources/libraries/robot/shared
AgeCommit message (Collapse)AuthorFilesLines
2024-05-31feat(hoststack): Enable L4 checksum RX offloadVratko Polak1-0/+5
As hoststack is never tested in container/VM (yet), configuration there does not check the new flag. Change-Id: Icac4837efcf035cad0f1e126e1bf90811aba16b2 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2024-05-31Revert "feat(hoststack): Enable L4 checksum RX offload"Peter Mikus1-5/+0
This reverts commit 4e897a7a91e8b4782da05a4c906392e62c8f8ab5. Reason for revert: Container/Qemu is not conditioned. Change-Id: I497caa2db24803f40811b3c60c359b4772cacda7 Signed-off-by: Peter Mikus <peter.mikus@protonmail.ch>
2024-05-30feat(hoststack): Enable L4 checksum RX offloadVratko Polak1-0/+5
Change-Id: I169b06433ae962811aafa91ce90fe169b0bc4c71 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2024-05-29fix(core): AWS interface initializationpmikus1-0/+6
Signed-off-by: pmikus <peter.mikus@protonmail.ch> Change-Id: I3ef110e8fec2fa8abafead1392a1b2af5e59f803
2024-04-11feat(tests): IPv6 scalepmikus1-2/+1
Signed-off-by: Peter Mikus <peter.mikus@protonmail.ch> Change-Id: I720b7c96a6ac9f328aff57437e51254364604911
2024-03-25fix(terraform): vpp-device filespmikus1-0/+1
Signed-off-by: Peter Mikus <peter.mikus@protonmail.ch> Change-Id: I7f640aa28ecf3a60696676b0cf8afb7a080e1b12
2024-03-14feat(tests): Fix scaling of 6p3nicoper-240318pmikus1-4/+4
Signed-off-by: Peter Mikus <peter.mikus@protonmail.ch> Change-Id: I84d9cf2892423e62b116b07982d3e87120b66271
2024-02-06Add memif with DMA test suitesxinfengx1-1/+5
Change-Id: I8c27b5956c0c26bb2de48321675e285ed961412f Signed-off-by: xinfengx <xinfengx.zhao@intel.com>
2023-11-03feat(tests): 6p3nic ip4 testsoper-231106pmikus1-2/+2
Signed-off-by: Peter Mikus <peter.mikus@protonmail.ch> Change-Id: I69ee305b25b9e05d2305cb82aba71ef6418780ab
2023-10-13fix(pylint): Minor warningspmikus1-1/+1
Signed-off-by: pmikus <peter.mikus@protonmail.ch> Change-Id: Id646ab09ae51d3153446f1ae334f62ba7710be14
2023-09-22fix(core): TRex self loop testspmikus1-1/+1
Signed-off-by: pmikus <peter.mikus@protonmail.ch> Change-Id: I8945daffd500f689b3eb630f1ce7e1dc4f05aca8
2023-09-21fix(core): String mappingpmikus1-1/+1
Signed-off-by: pmikus <peter.mikus@protonmail.ch> Change-Id: I4db3fc1b70469a966e51afe3bfa93cb4bcffa654
2023-09-21feat(core): Multilink backendpmikus2-11/+4
Signed-off-by: pmikus <peter.mikus@protonmail.ch> Change-Id: I8d168979ab9722e0056e97edb228f29cbfa245e3
2023-08-17fix(core): Variables for GSOpmikus1-4/+4
Signed-off-by: pmikus <peter.mikus@protonmail.ch> Change-Id: I6768f65551deb335ba7b9fc07bca164bca9381fe
2023-08-11feat(core): QAT initialization refactorpmikus2-30/+1
Signed-off-by: pmikus <peter.mikus@protonmail.ch> Change-Id: Idc91da55ab0b5c6b8eb53e8b4ce4da18a1ae891c
2023-08-04fix(core): QAT VF bindpmikus1-1/+1
Signed-off-by: pmikus <peter.mikus@protonmail.ch> Change-Id: Iafae1a1f538b928d3bb80bf9610a0bf7de646f8a
2023-07-27fix(core): QAT initializationpmikus2-1/+1
Signed-off-by: pmikus <peter.mikus@protonmail.ch> Change-Id: I28af64b7d39a97bbb84f9d987a3f5d3a2d02701b
2023-07-27feat(core): Core allocationpmikus2-10/+24
Signed-off-by: pmikus <peter.mikus@protonmail.ch> Change-Id: I782b87190dbee6e0a12c97f616b80539cd6614bd
2023-06-16Add cryptodev device 4xxxYulong Pei2-2/+3
QAT_4xxx is integrated QAT device on SPR platform. Signed-off-by: xinfeng zhao <xinfengx.zhao@intel.com> Signed-off-by: Yulong Pei <yulong.pei@intel.com> Change-Id: If1d4b3d72a2c66855ac8c1c42516f0cb78bdfab2
2023-06-15fix(tests): Hoststack 2n-xyzpmikus1-6/+19
Signed-off-by: pmikus <peter.mikus@protonmail.ch> Change-Id: I85de04e4a0ed1a642c40c8ca6840cbc1977b10be
2023-05-24feat(reassembly): add few suites for ip reassemblyVratko Polak1-0/+20
In tunneling scenarios, VPP needs to reassembly packet fragments before decapsulation. Conveniently, VPP also fragments the packets after encapsulation (at least for some encapsulation protocols) if they do not fit into MTU. So this change adds few suites, adapted from existing 3-node ones which additionally lower MTU on DUT1-DUT2 link. The intended packet size is 1518B. 64B packets will fit, and most of IMIX packets will also fit without fragmentation. VPP refuses to reassembly 9000B packets as they have too many fragments. + Add a keyword so suites need only one additional line of code. + Add new test tag REASSEMBLY for the added suites. + Tell autogen the one soak test case for reaseembly should be 1518B. - It is possible to increase fragment limit for 9000B, not done yet. - Ipsec policy suites are added but they should not be used. - VPP does fragmentation twice (before and after encapsulation). - VPP does not perform reassembly (only last fragment is decrypted). - TRex does not realize the packet from VPP is only a fragment. - The result is false pass with unfairly good performance. + Suites still included, to simplify verifying VPP fixes for the above. Change-Id: If33c60d767fea161d9e4ffabb8ded3d81c8f39ed Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2023-05-22feat(interface): apply MTU for dpdk plugin ifacesVratko Polak1-20/+14
When changing MTU on a running VPP, the interface has to be down. - Other plugins (rdma, avf, af_xdp) need vastly different logic, so support for them will be added later. + Mlx5-core does not need to set MTU on Linux interface. + MTU setting now does not happen at final setting path up, it happens in driver initialization layer instead E.g. AVF tests will not attempt to change MTU. + MTU edit removed from some non-hardware interfaces (including memif) e.g. bond interfaces. MTU on parent hw interface seems to be enough. + The non-jumbo MTU value used is 1800, so 1518B tests with additional encapsulation can still work. + When VPP MTU setting fails, the failure is now propagated. Previously, the failure was just logged and ignored, but now there is no reason to hide it. Ticket: CSIT-1797 Change-Id: I3b853f1faf90001d544cbbb87b2affbb882ffba0 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2023-05-15fix(core): Container entropypmikus1-2/+1
Signed-off-by: pmikus <peter.mikus@protonmail.ch> Change-Id: I45760143ae0ccb0cc0edf0931ad47f5cf48ec968
2023-05-10feat(infra): Remove system.d dependencypmikus1-4/+3
Signed-off-by: pmikus <peter.mikus@protonmail.ch> Change-Id: Icb7b6124dcba7bb57c18ceb91120284f6fe02c2e
2023-05-05fix(core): Docker detectionpmikus1-3/+4
Signed-off-by: pmikus <peter.mikus@protonmail.ch> Change-Id: I976f96410b06b4f4d7500b03b1f5dd54486bbf42
2023-02-24Fix: detaches the attached XDP/BPF program before af_xdp test runYulong Pei1-0/+2
When call create af_xdp interface api, it will load default xdp program (xsk_def_prog.o) on the NIC interface, the program will be unloaded when call delete af_xdp interface api, but current csit config did not call delete api for af_xdp test cases, that will cause af_xdp test case fails to run on Intel E810 NIC when the interface already have xdp program attached, so this patch is to fix this issue by to detach any attached XDP/BPF program on the interface before af_xdp test case run. Signed-off-by: Yulong Pei <yulong.pei@intel.com> Change-Id: I1a557b4c4a7e88c5715cec771a001df29ac4ae6f Signed-off-by: Yulong Pei <yulong.pei@intel.com>
2023-02-22fix(core): log but not export from teardownpmikus1-1/+3
Signed-off-by: pmikus <peter.mikus@protonmail.ch> Change-Id: I0f5f1000f55110455e86db4c461fba3c87fb198e
2023-01-12feat(core): Add mlx5_core driver testspmikus1-1/+30
Signed-off-by: pmikus <peter.mikus@protonmail.ch> Change-Id: I23f2ab678e6666a1423620fa373261d822030bc8
2022-12-06feat(model): Cleanup and introduce telemetrypmikus1-1/+1
- Due to divergence from original design path the RAW was never consumed. It adds too much code complexity and requires processing on both storage and compute. Removing entirely to make modeling efficient. - log (apparently SSH) section will never be consumed in the way it is coded in model. This section is also not part of model schema itself due to the point above. - Introducing telemetry section that is going to carry telemetry items required for CDash. Signed-off-by: pmikus <peter.mikus@protonmail.ch> Change-Id: I7e0256c6c9715de8ee559eed29dce96329aac97d
2022-11-23Fix: Nginx check simplifiedViliam Luc1-1/+1
Signed-off-by: Viliam Luc <vluc@cisco.com> Change-Id: Icd8a5e892bb2c31c01851f731482c692cea4d70a
2022-09-30Add VPP wireguard async mode test suiteYulong Pei1-1/+2
Add VPP wireguard async mode test suite to use QAT device for crypto. Also change keyword ipsechw to cryptohw in suite_setup.robot since currently crypto device is not only used by IPSec. Signed-off-by: Yulong Pei <yulong.pei@intel.com> Signed-off-by: xinfeng zhao <xinfengx.zhao@intel.com> Change-Id: Ibdadb3b09c04b7181415ffd4a248abddc6289075
2022-08-16fix: add missing closing ENDViliam Luc1-1/+0
Signed-off-by: Viliam Luc <vluc@cisco.com> Change-Id: I5352181e9cc427378ca919bf7459f0b7d1a62bd3
2022-08-16fix(robot): replace Run Keyword UnlessVratko Polak1-2/+2
Use Run Keyword If, with the condition negated. This silences the deprecation warning seen since Robot version bump. Change-Id: I9a88ff551994df3e129d71327f08207133a958a6 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2022-08-12fix(hoststack): add a missing endVratko Polak1-0/+1
Change-Id: I07de784de4bfd1e1fa4230567331e55a72d1a7de Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2022-06-14fix(vlan): do not apply strip offloadVratko Polak2-23/+1
Some tests (bonding) are failing as VPP refuses startup.conf. That is because the config parameter support has been removed: https://gerrit.fd.io/r/c/vpp/+/34822 That is VPP commit 8c8531c15c9195c2c82695eff6e70887de67fd88. According to commit message, it was just a workaround for Cisco ENIC cards, which are no longer tested in CSIT. + Delete 1 robot and 1 python keyword as they become unused. Change-Id: If53e324a27cfbd4659e49ab8bcd03253642dde96 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2022-06-01fix(core): TG exportPeter Mikus1-0/+1
Signed-off-by: Peter Mikus <pmikus@cisco.com> Change-Id: I80f9f32f10d46eccf1157949a184ec4467d071cd
2022-05-26fix(core): TG exportPeter Mikus1-1/+1
Signed-off-by: Peter Mikus <pmikus@cisco.com> Change-Id: I60313cd62a878bb713832f14121a938a81c954ed
2022-05-24fix(uti): Add TG type exportPeter Mikus2-17/+33
- This is actually bug not a feature. - AB to be added later - Tested on TREX and iPerf3 Signed-off-by: Peter Mikus <pmikus@cisco.com> Change-Id: Ib6f2d13e3b9401a9fb5759e42a8a310ee11b9d41
2022-04-07Revert "feat(core): Add dpdk log level"Peter Mikus1-2/+2
This reverts commit 22bfd741614145d86751df2d61ff77af9db63627. Reason for revert: OMFG this patch is causing 90% perf degradation on AWS Change-Id: Id081f61ae849678b6b877fbf03309c4b1b0c6df6 Signed-off-by: Peter Mikus <pmikus@cisco.com>
2022-04-05VppConfigGenerator: disable vpp cli pagerDave Wallace1-1/+2
- Robot framework logs contain 'show pci' output from VPP that is truncated due to the VPP cli pager. Add UNIX cli-no-pager configuration to the default startup config to fix this issue. Signed-off-by: Dave Wallace <dwallacelf@gmail.com> Change-Id: I80f2cd045063245098f22eb638a9796c5031fecf
2022-03-21feat(core): Add dpdk log levelPeter Mikus1-2/+2
Signed-off-by: Peter Mikus <pmikus@cisco.com> Change-Id: I8af9bae81ec83a3195ae83febd978882ebc2474d
2022-01-17fix(IPsec): fix policy testsJuraj Linkeš1-2/+12
Replace the hardcoded SPD inbound/outbound ranges with values derived from test inputs. Add the necessary routes now that the tunnel endpoints are not in the same subnet. Also add ip neighbor entry on DUT2 for the same reason. Also replace ipsec sa dump with show ipsec all in teardown of tests where both SAs and SPDs are configured to improve troubleshooting. Change-Id: I7d89a99fcf457a701c87bf6ac07364b62802677d Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
2021-12-15UTI: Export resultsVratko Polak5-2/+28
+ Model version 1.0.0. - Only some result types are exported. + MRR, NDRPDR and SOAK. - Other result types to be added later. + In contrast, all test types are detected. + Convert custom classes to JSON-serializable equivalents. + Sort dict keys before converting to JSON. + Override the order for some known keys. + Export sets as sorted arrays. + Convert to info content from serialized raw content. + Also export outputs for suite setups and teardowns. + Info files for setup/teardown exist only temporarily. + The data is merged into suite.info.json file. + This simplifies presentation of total suite duration. + Define model via JSON schema: - Just test case, suite setup/teardown/suite to be added later. - Just info, raw to be added later. + Proper descriptions. + Json is generated from yaml. + This is a convenience for maintainers. + The officially used schema is the .json one. + TODOs written into a separate .txt file. + Validate exported instance against the schema. + Include format checking. + Update CSIT requirements for validation dependencies. + This needs python-dateutil==2.8.2, only a patch bump. + Compute bandwidth also for soak tests. + This unifies with NDRPDR to simplify schema definition. - PAL may need an update for parsing soak test message. + Include SSH log items, raw output only. + Generate all outputs in a single filesystem tree. + Move raw outputs into test_output_raw.tar.xz. + Rename existing tar with suites to generated_robot_files.tar.xz. Change-Id: I69ff7b330ed1a14dc435fd0ef008e753c0d7f78c Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2021-12-01feat(Performance): Add 2M/1G hugepagespmikus3-6/+8
+ Add ability to switch between hugepages. Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I84d8eae28ed414a32e5ba82e6c9ed10d7f0ef9cb
2021-11-08vpp_device: bind to vfio-pci before running testsJuraj Linkeš1-1/+2
In rare cases, binding the whole /dev/vfio folder will result in unusable VFs: notice dpdk EAL: Cannot open /dev/vfio/151: Device or resource busy [0], section 4.3.1. provides some clues as to what's going on and how to avoid the failure. Mounting /dev/vfio reset the file descriptors of all devices under /dev/vfio. Vfio-pci creates a device when an interface is bound to it. The rare failure then occurs when /dev/vfio is mounted while a process is using the file descriptors result in that process using invalid file descriptors (or file descriptors belonging to a different VF). Fix the issue by binding i40e and ice VFs to vfio-pci before containers are created and make sure that the VFs are not unbound later in testing. Only bind DUT VFs since the TG uses the kernel driver. [0]: https://connect.redhat.com/sites/default/files/2021-03/Cloud Native Network Function Requirements.pdf Ticket: CSIT-1794 Change-Id: I83db91b29d16669fb034b141ad247f6f796fdf64 Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
2021-10-08Add flow test suitesxinfeng zhao2-0/+56
The comms DDP package needs to be installed to support all flow protocols Signed-off-by: xinfeng zhao <xinfengx.zhao@intel.com> Change-Id: I6ab1bd8beb9edb8c9889a0ed9a999080ca3cef3d
2021-09-10back-to-back tests: add TG testsViliam Luc1-0/+32
Change-Id: I9d028294deb1e31b6d185deb1c7523e0226a0ada Signed-off-by: Viliam Luc <vluc@cisco.com>
2021-08-24Telemetry: vpp devicepmikus2-30/+7
Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I80efb278cf824dd8b1d38bb3ff3df43366e7295a
2021-08-24Fix DPDK nb_cores allocationpmikus1-1/+1
+ Migrate the call to main python util Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I8d00165071d4764121740c1c77819b8ffc65b3ba
2021-07-20FIX: Mellanoxpmikus1-5/+6
Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I6aba0123c1f79e5c2acbac07503f74fc0050f472