aboutsummaryrefslogtreecommitdiffstats
path: root/resources/libraries/robot/shared
AgeCommit message (Collapse)AuthorFilesLines
2023-02-24Fix: detaches the attached XDP/BPF program before af_xdp test runYulong Pei1-0/+2
When call create af_xdp interface api, it will load default xdp program (xsk_def_prog.o) on the NIC interface, the program will be unloaded when call delete af_xdp interface api, but current csit config did not call delete api for af_xdp test cases, that will cause af_xdp test case fails to run on Intel E810 NIC when the interface already have xdp program attached, so this patch is to fix this issue by to detach any attached XDP/BPF program on the interface before af_xdp test case run. Signed-off-by: Yulong Pei <yulong.pei@intel.com> Change-Id: I1a557b4c4a7e88c5715cec771a001df29ac4ae6f Signed-off-by: Yulong Pei <yulong.pei@intel.com> (cherry picked from commit 1fbfcbcb15bc51b7b689df44ae338a1c7db6269c)
2023-01-12feat(core): Add mlx5_core driver testspmikus1-1/+30
Signed-off-by: pmikus <peter.mikus@protonmail.ch> Change-Id: I23f2ab678e6666a1423620fa373261d822030bc8
2022-12-06feat(model): Cleanup and introduce telemetrypmikus1-1/+1
- Due to divergence from original design path the RAW was never consumed. It adds too much code complexity and requires processing on both storage and compute. Removing entirely to make modeling efficient. - log (apparently SSH) section will never be consumed in the way it is coded in model. This section is also not part of model schema itself due to the point above. - Introducing telemetry section that is going to carry telemetry items required for CDash. Signed-off-by: pmikus <peter.mikus@protonmail.ch> Change-Id: I7e0256c6c9715de8ee559eed29dce96329aac97d
2022-11-23Fix: Nginx check simplifiedViliam Luc1-1/+1
Signed-off-by: Viliam Luc <vluc@cisco.com> Change-Id: Icd8a5e892bb2c31c01851f731482c692cea4d70a
2022-09-30Add VPP wireguard async mode test suiteYulong Pei1-1/+2
Add VPP wireguard async mode test suite to use QAT device for crypto. Also change keyword ipsechw to cryptohw in suite_setup.robot since currently crypto device is not only used by IPSec. Signed-off-by: Yulong Pei <yulong.pei@intel.com> Signed-off-by: xinfeng zhao <xinfengx.zhao@intel.com> Change-Id: Ibdadb3b09c04b7181415ffd4a248abddc6289075
2022-08-16fix: add missing closing ENDViliam Luc1-1/+0
Signed-off-by: Viliam Luc <vluc@cisco.com> Change-Id: I5352181e9cc427378ca919bf7459f0b7d1a62bd3
2022-08-16fix(robot): replace Run Keyword UnlessVratko Polak1-2/+2
Use Run Keyword If, with the condition negated. This silences the deprecation warning seen since Robot version bump. Change-Id: I9a88ff551994df3e129d71327f08207133a958a6 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2022-08-12fix(hoststack): add a missing endVratko Polak1-0/+1
Change-Id: I07de784de4bfd1e1fa4230567331e55a72d1a7de Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2022-06-14fix(vlan): do not apply strip offloadVratko Polak2-23/+1
Some tests (bonding) are failing as VPP refuses startup.conf. That is because the config parameter support has been removed: https://gerrit.fd.io/r/c/vpp/+/34822 That is VPP commit 8c8531c15c9195c2c82695eff6e70887de67fd88. According to commit message, it was just a workaround for Cisco ENIC cards, which are no longer tested in CSIT. + Delete 1 robot and 1 python keyword as they become unused. Change-Id: If53e324a27cfbd4659e49ab8bcd03253642dde96 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2022-06-01fix(core): TG exportPeter Mikus1-0/+1
Signed-off-by: Peter Mikus <pmikus@cisco.com> Change-Id: I80f9f32f10d46eccf1157949a184ec4467d071cd
2022-05-26fix(core): TG exportPeter Mikus1-1/+1
Signed-off-by: Peter Mikus <pmikus@cisco.com> Change-Id: I60313cd62a878bb713832f14121a938a81c954ed
2022-05-24fix(uti): Add TG type exportPeter Mikus2-17/+33
- This is actually bug not a feature. - AB to be added later - Tested on TREX and iPerf3 Signed-off-by: Peter Mikus <pmikus@cisco.com> Change-Id: Ib6f2d13e3b9401a9fb5759e42a8a310ee11b9d41
2022-04-07Revert "feat(core): Add dpdk log level"Peter Mikus1-2/+2
This reverts commit 22bfd741614145d86751df2d61ff77af9db63627. Reason for revert: OMFG this patch is causing 90% perf degradation on AWS Change-Id: Id081f61ae849678b6b877fbf03309c4b1b0c6df6 Signed-off-by: Peter Mikus <pmikus@cisco.com>
2022-04-05VppConfigGenerator: disable vpp cli pagerDave Wallace1-1/+2
- Robot framework logs contain 'show pci' output from VPP that is truncated due to the VPP cli pager. Add UNIX cli-no-pager configuration to the default startup config to fix this issue. Signed-off-by: Dave Wallace <dwallacelf@gmail.com> Change-Id: I80f2cd045063245098f22eb638a9796c5031fecf
2022-03-21feat(core): Add dpdk log levelPeter Mikus1-2/+2
Signed-off-by: Peter Mikus <pmikus@cisco.com> Change-Id: I8af9bae81ec83a3195ae83febd978882ebc2474d
2022-01-17fix(IPsec): fix policy testsJuraj Linkeš1-2/+12
Replace the hardcoded SPD inbound/outbound ranges with values derived from test inputs. Add the necessary routes now that the tunnel endpoints are not in the same subnet. Also add ip neighbor entry on DUT2 for the same reason. Also replace ipsec sa dump with show ipsec all in teardown of tests where both SAs and SPDs are configured to improve troubleshooting. Change-Id: I7d89a99fcf457a701c87bf6ac07364b62802677d Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
2021-12-15UTI: Export resultsVratko Polak5-2/+28
+ Model version 1.0.0. - Only some result types are exported. + MRR, NDRPDR and SOAK. - Other result types to be added later. + In contrast, all test types are detected. + Convert custom classes to JSON-serializable equivalents. + Sort dict keys before converting to JSON. + Override the order for some known keys. + Export sets as sorted arrays. + Convert to info content from serialized raw content. + Also export outputs for suite setups and teardowns. + Info files for setup/teardown exist only temporarily. + The data is merged into suite.info.json file. + This simplifies presentation of total suite duration. + Define model via JSON schema: - Just test case, suite setup/teardown/suite to be added later. - Just info, raw to be added later. + Proper descriptions. + Json is generated from yaml. + This is a convenience for maintainers. + The officially used schema is the .json one. + TODOs written into a separate .txt file. + Validate exported instance against the schema. + Include format checking. + Update CSIT requirements for validation dependencies. + This needs python-dateutil==2.8.2, only a patch bump. + Compute bandwidth also for soak tests. + This unifies with NDRPDR to simplify schema definition. - PAL may need an update for parsing soak test message. + Include SSH log items, raw output only. + Generate all outputs in a single filesystem tree. + Move raw outputs into test_output_raw.tar.xz. + Rename existing tar with suites to generated_robot_files.tar.xz. Change-Id: I69ff7b330ed1a14dc435fd0ef008e753c0d7f78c Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2021-12-01feat(Performance): Add 2M/1G hugepagespmikus3-6/+8
+ Add ability to switch between hugepages. Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I84d8eae28ed414a32e5ba82e6c9ed10d7f0ef9cb
2021-11-08vpp_device: bind to vfio-pci before running testsJuraj Linkeš1-1/+2
In rare cases, binding the whole /dev/vfio folder will result in unusable VFs: notice dpdk EAL: Cannot open /dev/vfio/151: Device or resource busy [0], section 4.3.1. provides some clues as to what's going on and how to avoid the failure. Mounting /dev/vfio reset the file descriptors of all devices under /dev/vfio. Vfio-pci creates a device when an interface is bound to it. The rare failure then occurs when /dev/vfio is mounted while a process is using the file descriptors result in that process using invalid file descriptors (or file descriptors belonging to a different VF). Fix the issue by binding i40e and ice VFs to vfio-pci before containers are created and make sure that the VFs are not unbound later in testing. Only bind DUT VFs since the TG uses the kernel driver. [0]: https://connect.redhat.com/sites/default/files/2021-03/Cloud Native Network Function Requirements.pdf Ticket: CSIT-1794 Change-Id: I83db91b29d16669fb034b141ad247f6f796fdf64 Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
2021-10-08Add flow test suitesxinfeng zhao2-0/+56
The comms DDP package needs to be installed to support all flow protocols Signed-off-by: xinfeng zhao <xinfengx.zhao@intel.com> Change-Id: I6ab1bd8beb9edb8c9889a0ed9a999080ca3cef3d
2021-09-10back-to-back tests: add TG testsViliam Luc1-0/+32
Change-Id: I9d028294deb1e31b6d185deb1c7523e0226a0ada Signed-off-by: Viliam Luc <vluc@cisco.com>
2021-08-24Telemetry: vpp devicepmikus2-30/+7
Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I80efb278cf824dd8b1d38bb3ff3df43366e7295a
2021-08-24Fix DPDK nb_cores allocationpmikus1-1/+1
+ Migrate the call to main python util Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I8d00165071d4764121740c1c77819b8ffc65b3ba
2021-07-20FIX: Mellanoxpmikus1-5/+6
Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I6aba0123c1f79e5c2acbac07503f74fc0050f472
2021-06-17Core: Rework CPU allocationpmikus3-138/+24
Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I6826add7b3032041632c3952c45a3c64409400b0
2021-06-10FIX: Pylint reducepmikus3-3/+3
Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I909942dbb920df7f0fe15c0c92cda92c3cd8d8ad
2021-06-10Dpdk in VM: Increase num_mbufsVratko Polak1-3/+4
Since switching to rxq ratio 1:1, the previous value was not enough for 4c vhost tests. + Set the 1:1 rxq ratio also for DPDK (outside vhost) tests. - Still not sure why those tests were not failing. + Set the 1:1 rxq ratio also for VPP container tests. Ticket: CSIT-1783 Change-Id: Id9d136a638eb212a8105a6288e7847f3c35fefb0 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2021-06-04Performance: Add AF_XDP testspmikus3-6/+67
- enabling for fortville, columbiaville - enabling experimental for mlx Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I1b7ceb54769f4a0089ac7309350499e60c5cca0a
2021-05-26Add dpdk max-simd-bitwidth configuration.xinfeng zhao1-0/+1
Signed-off-by: xinfeng zhao <xinfengx.zhao@intel.com> Reviewed-by: Yulong Pei <yulong.pei@intel.com> Change-Id: Ie7b9912eacdb60689012936580d3d774f7e470ae
2021-05-26rxq_ratio default value changed to 1viliam.luc1-2/+2
Change-Id: I0c973ceffc13f4f3c5f959d56cb0890b87091a82 Signed-off-by: Viliam Luc <viliam.luc@pantheon.tech>
2021-05-20perf: add TCP Nginx+LDPRELOAD suitesxizhanx3-2/+59
1. Suite steup add download nginx 2. Add nginx-1.14.2/1.15.0 ldp test suite 3. Add NginxUtils,NginxConfigGenerator method 4. Taskset the PID of nginx to the unused cores in VPP and these cores are under NIC's NUMA ID 5. cleanup add Kill Processes - nohup Signed-off-by: xizhanx <xix.zhang@intel.com> Change-Id: Idbf0e4ec3bf63e88281a8e3e34f52e00a6801c85 Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2021-03-31Device: Add stats test with AVFVratko Polak1-0/+28
+ Extract the stats keyword into a library. Change-Id: Icfaaa32c2a97d479ba0339acf34b865006949a89 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2021-02-19Add test suites for crypto sw scheduler engineYulong Pei1-0/+23
This patch is to add test suites for vpp plugin crypto_sw_scheduler, IPsec sync mode is to do crypto and packet forward work in same worker cores, crypto_sw_scheduler can schedule crypto work to other async crypto cores to improve whole crypto processing capability. This test suites configure fixed 1 rx queues per port, then measure IPsec performance with 1, 2, 3 crypto cores. This patchset include 1, 2, 4, 8 ipsec tunnels test cases. +Vratko help to change to count total physical cores instead of previous only count crypto cores in test cases. Change-Id: I0e67182e3d13273890a23703d838101900e25126 Signed-off-by: Yulong Pei <yulong.pei@intel.com> Signed-off-by: Vratko Polak <vrpolak@cisco.com> Signed-off-by: pmikus <pmikus@cisco.com>
2021-02-19Framework: GSO testpmikus1-0/+69
Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I874568aebbe50c38e634438eb1201ca737bd18ad
2021-01-04API: deprecated COP APIsTomas Alexy1-1/+1
Signed-off-by: Tomas Alexy <tomas.alexy@pantheon.tech> Change-Id: Ifb97088a26f3c2ab2ecee28ed43e6e957a844c64
2021-01-04GSO: TAP/VHOST use casepmikus4-27/+142
Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: Ibafaaca4438587284d1e255c764f0701002941e8
2020-12-18API: deprecated bond APIsJan Gelety1-2/+2
Jira: CSIT-1597 Change-Id: I77b746584851331d46eca1caafd4468d18f1e78d Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-12-16API: deprecated IPSEC APIsJan Gelety1-0/+9
Jira: CSIT-1597 + add ipsec_sa tear down action Change-Id: I4d1e6f26c14e61e8ddc6f29fbf5528a034c84eb0 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-12-03vpp-device: GENEVE tunnel test, l3 modeJan Gelety2-87/+140
Jira: CSIT-1769 Change-Id: I98510cd8e627d7347f77d0032b7bac28f2e36c61 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-12-08Revert "vpp-device: GENEVE tunnel test, l3 mode"Peter Mikus2-140/+87
This reverts commit a9f54ca5080aeef17686f300a6807bf9b46b7c90. Reason for revert: DO NOT MERGE BROKEN TESTS!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! https://logs.fd.io/production/vex-yul-rot-jenkins-1/csit-vpp-device-master-ubuntu1804-1n-skx/9918/archives/log.html.gz Change-Id: I2ce2970a43e5dd7487eeb54d1ccbb149e06cf8fa Signed-off-by: pmikus <pmikus@cisco.com>
2020-12-03vpp-device: GENEVE tunnel test, l3 modeJan Gelety2-87/+140
Jira: CSIT-1769 Change-Id: I0ab906966f760b809b8431530c010a8f0835d62c Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-12-02API: deprecated NAT APIsJan Gelety1-4/+3
Jira: CSIT-1597 Change-Id: Ib48d20ba087bc9828970c3acc081ac6e4447c20c Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-11-25Add rxq_thr optionpmikus1-1/+2
Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I46750f8571d86dc13df95252e8894c4b988efd5c
2020-10-29Support existing test types with ASTFVratko Polak2-6/+35
+ Add UDP_CPS, TCP_CPS, UDP_PPS and TCP_PPS suites. + Update existing cps traffic profiles. + Add missing traffic profiles. + UDP: + Single burst of 32 packets was confirmed as safe enough for TRex. + Maybe 64 could work, but not enough testing for that. + Multiple bursts have lead to reduced TRex performance, as overlaping bursts (from different client instances) tend to fill up the buffers. + TCP: + Data size set to 11111 bytes, completely arbitrarily. + Results look reasonable, so I have kept that. - MSS not set at all - No tested support for frame size other than 64B. - Frame size does not even factor into TCP profiles. + So other frame sizes are skipped in autogen. + Update tags in related suites. - HOSTS_{n} and SRC_USER_{n} should be unified. - Questionable clarification on difference between IP4BASE and SCALE. + Add NAT state resetters to tests that need them. + Resetter is called (if set) before each measurement. + If ramp-up is detected, resetter is not set. + Rename "mult" argument to "multiplier". + Abstracted from packets to transactions. + Transaction corresponds to profile. + TRex multiplier argument sets target rate in transactions per second. + The familiar STL traffic: + Bidirectional is considered to be 2 packets per transaction. + Unidirectional is considered to be 1 packet per transaction. + The newer ASTF traffic: + 4 subtypes, each has different number of packets per transaction. + For max rate computation: + Packets in the more numerous direction are considered. + Rely on TRex reported traffic duration for ASTF: + Use the server side value. - Client side value is higher by an overhead. - TRex is not sending traffic during that time. + Remove delays from traffic profiles. - Those delays would increase the reprted traffic time. + Support for scale lmited trials. + Only for ASTF profiles, each ASTF profile has limited scale. + Scale defined in suite variables. + For TRex to send all transactions provided duration value is ignored. + The appropriate value is computed in TrafficGenerator. + An ad-hoc time constant is added to match the TRex client side time overhead. + The profile driver receives the computed duration. + Measurement for PLRsearch add a sleep if the computed duration is smaller. + Alternative argument for search algos if scale is limited. + Both need higher timeout to accomodate big scales. + MLRsearch can afford fewer phases. + Added a parameter to optionally shorten the duration. + Use short duration for runtime stats trial and failure stats trial. + Use very large keepalive values in udp profiles to avoid ka packets. + No polling in ASTF profile driver. - Polling could eliminate the time overhead value. + But polling proved to introduce some loss, affecting the results. + Handle duration stretching in ASTF by stopping traffic. + The stop has several steps so that: + The traffic is really stopped entirely. + Late packets do not count (maybe as errors). + Stats are preserved to read for results (and cleared afterwards). + Several quantities added to ReceiveRateMeasurement: + Original target duration is preserved (algos need that). + Input estimate (tps) for early search iterations. + Output estimate (maybe pps) for MRR output. + Strict result (unsent counts as loss) for NDR. + Use L2 counters (opackets, ipackets) where possible. - TRex has trouble processing packets for the L7 ones at high loads. + Remove warmup from profile drivers and keywords. + Suites should call "Send ramp-up traffic" explicitly if needed. + Added parsing for few more counters. + Both to use in formulas or just for debug purposes. - Only 64B cases in autogen, framesize support to be added later. + Latency streams during search can be enabled via PERF_USE_LATENCY env var. + MLRsearch improvments: + Rename argument names to min_rate and max_rate. + Use relative receive rate in initial phase. + PLRsearch improvements: + Careful computation when output (pps) does not match input (tps). + Use geometric distribution (instead of Poisson). + Helps agains math errors. + This should improve estimate stability. - But in practice big losses still lead to significant jumps. + Traffic generator improvements: + send_traffic_on_tg now calls the full set_rate_provider_defaults. + _send_traffic_on_tg_internal for the logic without provider defaults. + As the internal function is re-used by measure() without affecting defaults. + Move _parse_traffic_results just before get_measurement_result. + As the latter uses fields set bu the former, it is now easier to read. + Multiple sources for approximate duration. + Tried from more precise to more available. + Includes logic for _pps tests (added in later change). + Move explicit type conversions to earlier occurences. + Profile driver output field uses semicolons to simplify parsing. + Performance Robot lib file split to several smaller ones. + performance_actions.robot: + Hosts Additional Statistics Action For * keywords. + performance_display.robot: + Hosts keyword for displaying and verifying results. + Change test message to use the correct unit (pps or cps). + performance_limits.robot renamed to performance_vars.robot + Added many keywords, mostly for accessing test variables. + Moved variables for Policer into a new keyword there. + Some keywords need sophisticated logic. - Other are basically Get Variable Value. + But in future more logic can be added, without editing callers. + Documentation for the new keywords acts as a documentation for test variables. + performance_utils.robot has the rest. + Eliminated arguments if the value is in test variable. + Small improvements to documentation. - Still not enough cleanup with respect to arguments and test variables. + Keywords are sorted alphabetically now in each one. + Suites: + Unified variables table: + No colons in comments. + ${n_hosts}, ${n_ports} and use them instead hardcoded numbers. + Add -cps to existing cps suite names. + Remove "trial data overwrite". + Compute max rate as in STL suites. + Each NAT suite has ip4base suite to compare results to. - Those act as indirect TRex calibration. - VPP does not lose packets in those. + Latency in ASTF suites is disabled hard. - As we do not support latency in ASTF profiles yet. + Unidirectional tests governed by suite variable, not an argument. + Write long argument lists vertically. + Prefer to use argument names. + In Python, also the last argument is followed by comma. + It makes renaming and reordering easier. + Similarly applies to prints with long lists of values. + A TODO to update api crc file comments. Change-Id: I84729355edbec051298a9de1162107f88ff5737d Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2020-10-29tests: Add GSO enabled testsMartin Balaz2-5/+6
Change-Id: I409b060f64ae7c6787448ae519fd76d8384e9ffb Signed-off-by: Martin Balaz <martin.balaz@pantheon.tech>
2020-10-19Tests: Remove GBPpmikus1-1/+0
- Specs - Tests - Library - TODO: PAL Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I8890940d56c7a9924d4a5f9365b6bb881610db14
2020-09-30Framework: main heap size value multiplicationJan Gelety1-1/+1
- default value for main heap size set to 2G - allow allocation of n x 2G in tests that need it Change-Id: I02dafe6bc61649d2823486a3e983f66f5a213a88 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-09-24test: nat44det - add session number checkJan Gelety1-1/+1
- some tests need to reduce rate for ramp-up phase - some tests need to extend trail duration in ramp-up phase - removed 2n1l-10ge2p1x710-ethip4udp-nat44det-h1-p63-s63 suite as nat out ports are randomly selected from available port range so T-Rex stateless is not able to provide required out2in traffic Change-Id: I1145496610d202f81d911e68aa819844d7600918 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-09-23FIX: Race conditionpmikus1-0/+2
avf tests works, but vfio-pci tests are following, the interfaces must be in down state (ideally unbind, as vpp cannot pick them). Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I77af85ec4239059a5455ef68683ca129548bd7bd
2020-09-22Framework: Heapsize configurationpmikus1-3/+4
- https://gerrit.fd.io/r/c/vpp/+/28829 - https://gerrit.fd.io/r/c/vpp/+/28896 - ip6 to be added later Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I7b03b8ace5c5c7582d4a2f66bfd788a3ec80a916