aboutsummaryrefslogtreecommitdiffstats
path: root/resources/libraries/robot
AgeCommit message (Collapse)AuthorFilesLines
2023-06-21feat(infra): update 3n-alt cx6 iterative testsJuraj Linkeš1-0/+8
Add ipsec reassembly test cases to bring in line with 3n-icx. Add ipsec policy test cases with flow cache enabled for both inbound and outbound traffic. Remove GTPU hardware tests as the NIC doesn't support GTPU offload RX. Change-Id: I7b18914f983d5974b390f995ec638a64b9bbccbb Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
2023-06-16Add cryptodev device 4xxxYulong Pei2-2/+3
QAT_4xxx is integrated QAT device on SPR platform. Signed-off-by: xinfeng zhao <xinfengx.zhao@intel.com> Signed-off-by: Yulong Pei <yulong.pei@intel.com> Change-Id: If1d4b3d72a2c66855ac8c1c42516f0cb78bdfab2
2023-06-15fix(tests): Hoststack 2n-xyzpmikus1-6/+19
Signed-off-by: pmikus <peter.mikus@protonmail.ch> Change-Id: I85de04e4a0ed1a642c40c8ca6840cbc1977b10be
2023-05-31"fix(test): Hoststack"Peter Mikus1-2/+0
Change-Id: I6ec27d787b59d4bc13b8c04f4217302cc3021581 Signed-off-by: pmikus <peter.mikus@protonmail.ch>
2023-05-30fix(tests): Hoststack compatibilitypmikus1-0/+2
Signed-off-by: pmikus <peter.mikus@protonmail.ch> Change-Id: I198fe62ddba8910c6bd8256739cc2503b87dfc75
2023-05-24feat(reassembly): add few suites for ip reassemblyVratko Polak1-0/+20
In tunneling scenarios, VPP needs to reassembly packet fragments before decapsulation. Conveniently, VPP also fragments the packets after encapsulation (at least for some encapsulation protocols) if they do not fit into MTU. So this change adds few suites, adapted from existing 3-node ones which additionally lower MTU on DUT1-DUT2 link. The intended packet size is 1518B. 64B packets will fit, and most of IMIX packets will also fit without fragmentation. VPP refuses to reassembly 9000B packets as they have too many fragments. + Add a keyword so suites need only one additional line of code. + Add new test tag REASSEMBLY for the added suites. + Tell autogen the one soak test case for reaseembly should be 1518B. - It is possible to increase fragment limit for 9000B, not done yet. - Ipsec policy suites are added but they should not be used. - VPP does fragmentation twice (before and after encapsulation). - VPP does not perform reassembly (only last fragment is decrypted). - TRex does not realize the packet from VPP is only a fragment. - The result is false pass with unfairly good performance. + Suites still included, to simplify verifying VPP fixes for the above. Change-Id: If33c60d767fea161d9e4ffabb8ded3d81c8f39ed Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2023-05-22feat(interface): apply MTU for dpdk plugin ifacesVratko Polak5-41/+28
When changing MTU on a running VPP, the interface has to be down. - Other plugins (rdma, avf, af_xdp) need vastly different logic, so support for them will be added later. + Mlx5-core does not need to set MTU on Linux interface. + MTU setting now does not happen at final setting path up, it happens in driver initialization layer instead E.g. AVF tests will not attempt to change MTU. + MTU edit removed from some non-hardware interfaces (including memif) e.g. bond interfaces. MTU on parent hw interface seems to be enough. + The non-jumbo MTU value used is 1800, so 1518B tests with additional encapsulation can still work. + When VPP MTU setting fails, the failure is now propagated. Previously, the failure was just logged and ignored, but now there is no reason to hide it. Ticket: CSIT-1797 Change-Id: I3b853f1faf90001d544cbbb87b2affbb882ffba0 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2023-05-15fix(core): Container entropypmikus1-2/+1
Signed-off-by: pmikus <peter.mikus@protonmail.ch> Change-Id: I45760143ae0ccb0cc0edf0931ad47f5cf48ec968
2023-05-10feat(infra): Remove system.d dependencypmikus1-4/+3
Signed-off-by: pmikus <peter.mikus@protonmail.ch> Change-Id: Icb7b6124dcba7bb57c18ceb91120284f6fe02c2e
2023-05-05fix(core): Docker detectionpmikus1-3/+4
Signed-off-by: pmikus <peter.mikus@protonmail.ch> Change-Id: I976f96410b06b4f4d7500b03b1f5dd54486bbf42
2023-04-05fix(telemetry): Enable MRRpmikus1-1/+1
Signed-off-by: pmikus <peter.mikus@protonmail.ch> Change-Id: I11896900a73f97194a2935202343dc28756cbb28
2023-04-03Enable IPsec policy fast path inboundYulong Pei1-3/+6
This will greatly improve the performance of IPsec policy cases Signed-off-by: xinfeng zhao <xinfengx.zhao@intel.com> Signed-off-by: Yulong Pei <yulong.pei@intel.com> Change-Id: Ib42b5650791be7fcc8649873eaf12616aeba5aec
2023-02-24Fix: detaches the attached XDP/BPF program before af_xdp test runYulong Pei1-0/+2
When call create af_xdp interface api, it will load default xdp program (xsk_def_prog.o) on the NIC interface, the program will be unloaded when call delete af_xdp interface api, but current csit config did not call delete api for af_xdp test cases, that will cause af_xdp test case fails to run on Intel E810 NIC when the interface already have xdp program attached, so this patch is to fix this issue by to detach any attached XDP/BPF program on the interface before af_xdp test case run. Signed-off-by: Yulong Pei <yulong.pei@intel.com> Change-Id: I1a557b4c4a7e88c5715cec771a001df29ac4ae6f Signed-off-by: Yulong Pei <yulong.pei@intel.com>
2023-02-22fix(core): log but not export from teardownpmikus3-6/+12
Signed-off-by: pmikus <peter.mikus@protonmail.ch> Change-Id: I0f5f1000f55110455e86db4c461fba3c87fb198e
2023-02-02fix(perf/hoststack/quic): enable plugin_crypto_openssl.soDave Wallace1-6/+4
- convert hoststack tests to use app-api-socket instead of vpp-api-socket Change-Id: Ibcd87f3624e33168ed3afcb30267262efc927e7c Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2023-01-24Tune host stack performance testsFilip Tehlar1-27/+51
* remove evt_qs_memfd_seg and evt_qs_seg_size as they are obsolete * use app socket api instead of vpp's api * apply rx and tx descriptors constraints * increase event queue size for nginx tests Signed-off-by: Filip Tehlar <ftehlar@cisco.com> Change-Id: Ie7ac12b8f587e0b1962884127e8eb68a4e588aee Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2023-01-23fix(core): Telemetry for iperf3pmikus1-1/+2
Signed-off-by: pmikus <peter.mikus@protonmail.ch> Change-Id: I16469204c9bb9d521f0ca01bc3ed21ecba2d8824
2023-01-19Add 40k tunnels ipsec policy mode with fastpath enabled test suiteYulong Pei1-2/+3
In order to compare performance number with existed routing based ipip interface mode 40k tunnels ipsec test. Signed-off-by: xinfeng zhao <xinfengx.zhao@intel.com> Signed-off-by: Yulong Pei <yulong.pei@intel.com> Change-Id: I94816a8c18f08b539114d6ca9d4e1218a2b6ea5f
2023-01-12feat(core): Add mlx5_core driver testspmikus1-1/+30
Signed-off-by: pmikus <peter.mikus@protonmail.ch> Change-Id: I23f2ab678e6666a1423620fa373261d822030bc8
2022-12-12fix(core): Telemetry oloadpmikus2-8/+8
Signed-off-by: pmikus <peter.mikus@protonmail.ch> Change-Id: I1c13afd8cb377c76d65f7099b9652b96613ad087
2022-12-09feat(model): Reconf typepmikus1-2/+2
Signed-off-by: pmikus <peter.mikus@protonmail.ch> Change-Id: Ibfab25ee82eaa207987f4070cf2386ea9d0781cd
2022-12-06feat(telemetry): Add telemetry exportpmikus2-1/+10
Signed-off-by: pmikus <peter.mikus@protonmail.ch> Change-Id: Ibb8a59fd4e08bc736494c7ab18e689a55f7a98dc
2022-12-06feat(model): Cleanup and introduce telemetrypmikus1-1/+1
- Due to divergence from original design path the RAW was never consumed. It adds too much code complexity and requires processing on both storage and compute. Removing entirely to make modeling efficient. - log (apparently SSH) section will never be consumed in the way it is coded in model. This section is also not part of model schema itself due to the point above. - Introducing telemetry section that is going to carry telemetry items required for CDash. Signed-off-by: pmikus <peter.mikus@protonmail.ch> Change-Id: I7e0256c6c9715de8ee559eed29dce96329aac97d
2022-11-23Fix: Nginx check simplifiedViliam Luc1-1/+1
Signed-off-by: Viliam Luc <vluc@cisco.com> Change-Id: Icd8a5e892bb2c31c01851f731482c692cea4d70a
2022-10-03Add 10k tunnels IPSec policy mode test suitesYulong Pei1-0/+14
Also add 10k tunnels IPSec policy mode test with spd fast path enabled. spd fast path is to reduce policy adding time, refer to patchset [1] & [2] for details. [1] https://gerrit.fd.io/r/c/vpp/+/36095 [2] https://gerrit.fd.io/r/c/vpp/+/36097 Signed-off-by: xinfeng zhao <xinfengx.zhao@intel.com> Signed-off-by: yulong pei <yulong.pei@intel.com> Change-Id: I211b38a60d273c46e68a5b5f712090037977c6e6
2022-09-30Add VPP wireguard async mode test suiteYulong Pei2-1/+10
Add VPP wireguard async mode test suite to use QAT device for crypto. Also change keyword ipsechw to cryptohw in suite_setup.robot since currently crypto device is not only used by IPSec. Signed-off-by: Yulong Pei <yulong.pei@intel.com> Signed-off-by: xinfeng zhao <xinfengx.zhao@intel.com> Change-Id: Ibdadb3b09c04b7181415ffd4a248abddc6289075
2022-09-30feat(soak): add warmup and statsVratko Polak1-0/+24
Specifically on 2n-icx, soak tests are suffering from the first search trial (at half of max rate) reporting unsent packets, thus polluting the results, see CSIT-1867. This adds a plain trial (no stats, result ignored), fixing the issue. To keep the structure similar to NDRPDR tests, stats trial is done after the search, at the discovered critical rate. Ticket: CSIT-1867 Change-Id: I12ff6f58c4eb174594e667bfa86ba1585164b8ef Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2022-09-28telemetry: linux telemetry with perf-statViliam Luc1-0/+72
Signed-off-by: Viliam Luc <vluc@cisco.com> Change-Id: I17ced17a309cc0ac21c5fc94e570c89a456339e2
2022-08-16fix: add missing closing ENDViliam Luc2-2/+2
Signed-off-by: Viliam Luc <vluc@cisco.com> Change-Id: I5352181e9cc427378ca919bf7459f0b7d1a62bd3
2022-08-16fix(robot): replace Run Keyword UnlessVratko Polak9-39/+39
Use Run Keyword If, with the condition negated. This silences the deprecation warning seen since Robot version bump. Change-Id: I9a88ff551994df3e129d71327f08207133a958a6 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2022-08-12fix(hoststack): add a missing endVratko Polak1-0/+1
Change-Id: I07de784de4bfd1e1fa4230567331e55a72d1a7de Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2022-07-27fix: start testpmd and l3fwd in 3 cyclesViliam Luc1-93/+0
Signed-off-by: Viliam Luc <vluc@cisco.com> Change-Id: I935ee5cf5bd7e760ef29fdc338f981e4e7cc333f
2022-06-28feat(telemetry): ReworkPeter Mikus1-4/+4
Signed-off-by: Peter Mikus <pmikus@cisco.com> Change-Id: I0a84ce88b318c488ba2d519b20237c88b9f9f1e6
2022-06-20fix(uti): export correct units in cps ndrpdrVratko Polak1-1/+1
Compute Bandwidth keyword returns value in Gbps, as that is convenient for test messages. Export Search Bound keyword expects value in bps, as that is convenient for JSON export. While the conversion was present in Display Single PPS Bound keyword, it was missing from Display Single CPS Bound keyword. Now added. Change-Id: I5bb5934beeecfa2ee1b77dd1b1bfc788d034c845 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2022-06-20style(robot): capitalize two keywords properlyVratko Polak1-6/+6
This is just to make the subsequent fix more readable. Change-Id: I7cebcaed3f658cd026f05713ea2f94dce60786c0 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2022-06-17fix: testpmd and l3fwd check stateViliam Luc1-1/+9
+ print testpmd and l3fwd pid after start Testpmd and l3fwd utility can be started but link might not be ready yet. This fix start the utility on all DUTs and do the check later. Signed-off-by: Viliam Luc <vluc@cisco.com> Change-Id: If476e22f206d9a6a0dd399879a88eafedca92bb6
2022-06-14fix(vlan): do not apply strip offloadVratko Polak2-23/+1
Some tests (bonding) are failing as VPP refuses startup.conf. That is because the config parameter support has been removed: https://gerrit.fd.io/r/c/vpp/+/34822 That is VPP commit 8c8531c15c9195c2c82695eff6e70887de67fd88. According to commit message, it was just a workaround for Cisco ENIC cards, which are no longer tested in CSIT. + Delete 1 robot and 1 python keyword as they become unused. Change-Id: If53e324a27cfbd4659e49ab8bcd03253642dde96 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2022-06-10fix(hoststack): distinguish two tcp tag typesVratko Polak1-4/+8
Previous change did not consider TCP_PPS and TCP_CPS robot tags are used by two different suite types (hoststack or ASTF). This fixes the unintended impact on hoststack. + Add HOSTSTACK tag to VSAP suites. - They could also get VSAP tag, but not needed for this Change. Fixes: 1daa6fdc0bae284dee1b61f34534e59b60b7526a Change-Id: Ic583b5ae336c9b74794706fefc232f221a243c87 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2022-06-09Add Test Suite for VPP WireGuardCui,Cheng1-0/+58
Signed-off-by: Cui,Cheng <cheng.cui@intel.com> Change-Id: I71e257e5f16a887a40ff83d782a9ebdee9d05c34 Signed-off-by: Cui,Cheng <cheng.cui@intel.com>
2022-06-01fix(core): TG exportPeter Mikus1-0/+1
Signed-off-by: Peter Mikus <pmikus@cisco.com> Change-Id: I80f9f32f10d46eccf1157949a184ec4467d071cd
2022-05-26fix(core): TG exportPeter Mikus1-1/+1
Signed-off-by: Peter Mikus <pmikus@cisco.com> Change-Id: I60313cd62a878bb713832f14121a938a81c954ed
2022-05-24fix(uti): Add TG type exportPeter Mikus2-17/+33
- This is actually bug not a feature. - AB to be added later - Tested on TREX and iPerf3 Signed-off-by: Peter Mikus <pmikus@cisco.com> Change-Id: Ib6f2d13e3b9401a9fb5759e42a8a310ee11b9d41
2022-05-18Add gtpu flow offload test suiteYulong Pei1-2/+15
The implementation of GTPU offload rx is to use ip4_gtpu flow MARK action of NIC and vpp flow REDIRECT_TO_NODE and BUFFER_ADVANCE fuction to direct received gtpu flow to gtpu4-flow-input graph node, skipped ethernet-input, ip4-input, ip4-lookup, ip4-local, ip4-udp-lookup normal graph node processing. Verified on 3n-clx and Intel E810 NIC environment, single core with 64B packet, performance improve ~33% that compare with pure software way. Signed-off-by: xinfeng zhao <xinfengx.zhao@intel.com> Signed-off-by: Yulong Pei <yulong.pei@intel.com> Change-Id: I2af4589448bdb1729e4ce206a8cf3a1239c61af8 Signed-off-by: Yulong Pei <yulong.pei@intel.com>
2022-05-03feat(astf): Support framesizes for ASTFVratko Polak3-75/+188
- No support for IMIX. + Fix a bad bug in padding (most ASTF profiles had wrong frame sizes). + Fix a big typo in TCP PPS profiles (s->c was not data, just RST). + Control transaction size via ASTF_N_DATA_FRAMES env variable. - Default value 5 leads to transactions smaller than before. + It ensures transaction is one burst (per direction) even for jumbo. + Edit autogen to set supported frame sizes based on suite id. + Both TCP and UDP use the same values: + 64B for CPS (exact for UDP, nominal for TCP). + 100B, 1518B and 9000B for TPUT and PPS. - TCP TPUT achievable minimum is 70B. + Used 100B to leave room for possible IPv6 ASTF tests. + Separate function for code reused by vpp and trex tests. - I do not really like the new "copy and edit" approach added here. + But it is a quick edit, better autogen refactor is low priority. + Consider both established and transitory sessions as valid. - Mostly for compatibility with 2202 behavior and to avoid ramp-ups. - Assuming both session states have similar enough VPP CPU overhead. + Added a TODO to investigate and maybe reconsider later. + Update the state timeout value to 240s. + That is the default for TCP (for transitory state). - UDP could keep using 300s. + But I prefer UDP and TCP to behave as similarly as possible. + Use TRex tunables to get the exact frame size (for data packets). - It is not clear why the recipe for MSS has to be this complicated. + Move code away from profile init, as frame size is not known there. + Change internal profile API, so values related to MSS are passed. + Lower ramp-up rate for TCP TPUT tests. + Because without lower rate, jumbo fails on packet loss in ramp-up. + UDP TPUT ramp-up rate also lowered (just to keep suites more similar). + Distinguish one-direction and aggregated average frame size. + Update keyword documentation where the distiction matters. + One-direction is needed for turning bandwidth limit to TPS limit. + Aggregated is needed for correct NDRPDR bandwidth result value. - TCP TPUT will always be few percent below bidirectional maximum. + That is unavoidable, as one direction sends more control packets. + Add runtime consistency checks so future refactors are safer. + Fail if padding requested would be negative. + Fail if suite claims unexpected values for packets per transaction. + Edit the 4 types of ASTF profiles to keep them similar to each other. + Move UDP TPUT limit value from a field back to direct argument. + Stop pretending first UDP packet is not data. + Apply small improvements where convenient. + Replace "aggregate" with "aggregated" where possible. + To lower probability of any future typos in variable names. + Avoid calling Set Numeric Frame Sizes twice. + Code formatting, keyword documentation, code comments, ... + Add TODOs for less important code quality improvements. - Postpone updating of methodology pages to a subsequent change. Change-Id: I4b381e5210e69669f972326202fdcc5a2c9c923b Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2022-04-11feat(telemetry): T-Rex runtimePeter Mikus1-1/+36
Signed-off-by: Peter Mikus <pmikus@cisco.com> Change-Id: I2829b5931e5a63a33f524e1d14ffb20c27f4ce5a
2022-04-07Revert "feat(core): Add dpdk log level"Peter Mikus1-2/+2
This reverts commit 22bfd741614145d86751df2d61ff77af9db63627. Reason for revert: OMFG this patch is causing 90% perf degradation on AWS Change-Id: Id081f61ae849678b6b877fbf03309c4b1b0c6df6 Signed-off-by: Peter Mikus <pmikus@cisco.com>
2022-04-05VppConfigGenerator: disable vpp cli pagerDave Wallace1-1/+2
- Robot framework logs contain 'show pci' output from VPP that is truncated due to the VPP cli pager. Add UNIX cli-no-pager configuration to the default startup config to fix this issue. Signed-off-by: Dave Wallace <dwallacelf@gmail.com> Change-Id: I80f2cd045063245098f22eb638a9796c5031fecf
2022-03-21feat(core): Add dpdk log levelPeter Mikus1-2/+2
Signed-off-by: Peter Mikus <pmikus@cisco.com> Change-Id: I8af9bae81ec83a3195ae83febd978882ebc2474d
2022-03-09fix(lisp): repair a typoVratko Polak1-2/+2
+ Unify the order of interfaces, along 0-->1 path. Ticket: CSIT-1806 Fixes: 14a71b74b414df7616ccb5ada3d50ecb90d96bae Change-Id: Ia20d05b4e16daf60260fcbaea806406fa654a94e Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2022-02-16chore(api): use the non-deprecated nat init callVratko Polak1-2/+3
Change-Id: Ic1949c46aa339e66a47a0ebbc428499c5cf9305e Signed-off-by: Vratko Polak <vrpolak@cisco.com>