aboutsummaryrefslogtreecommitdiffstats
path: root/resources/libraries/robot
AgeCommit message (Collapse)AuthorFilesLines
2021-03-23Geneve: Re-write the creation of tunnels in pythonTibor Frank1-37/+4
Change-Id: I8b20134ad10abd9c021270b98c3110bd186946d5 Signed-off-by: Tibor Frank <tifrank@cisco.com>
2021-03-22MLRsearch: Support other than just two ratiosVratko Polak2-23/+20
+ Change some method names and argument types: + Do not mention NDR and PDR, except as examples. + Return list of ReceiveRateInterval instead of NdrPdrResult. + The resulting intervals can be degenerate when hitting min/max rate. + Rename quantity name parts from "fraction" to "ratio". + Intervals are no longer tracked for each target ratio. + They are found dynamically from known results. + Add effective_loss_ratio field to avoid loss inversion effects. + Move some functions to separate files. + Bound search logic moved to MeasurementDatabase.py + ProgressState moved to its file. + WidthArithmetics.py holds small computation functions. + Use parameter expansion_coefficient instead of "doublings". + Do uneven bisect to save time when width is not power of two times goal. + Timeout now correctly tracked for the whole search, not just the current phase. + Make logging (debug) function pluggable. + Added debug log messages for initial phase. + Do not mark as subclass if contructor signature differs. + Avoid re-measure on scale-limited (ASTF) profiles. + Remove outdated comments. + Bump copyright years. Change-Id: I93f693b4f186f59030ee5ac21b78acc890109813 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2021-02-19Add test suites for crypto sw scheduler engineYulong Pei2-1/+62
This patch is to add test suites for vpp plugin crypto_sw_scheduler, IPsec sync mode is to do crypto and packet forward work in same worker cores, crypto_sw_scheduler can schedule crypto work to other async crypto cores to improve whole crypto processing capability. This test suites configure fixed 1 rx queues per port, then measure IPsec performance with 1, 2, 3 crypto cores. This patchset include 1, 2, 4, 8 ipsec tunnels test cases. +Vratko help to change to count total physical cores instead of previous only count crypto cores in test cases. Change-Id: I0e67182e3d13273890a23703d838101900e25126 Signed-off-by: Yulong Pei <yulong.pei@intel.com> Signed-off-by: Vratko Polak <vrpolak@cisco.com> Signed-off-by: pmikus <pmikus@cisco.com>
2021-02-19Framework: GSO testpmikus1-0/+69
Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I874568aebbe50c38e634438eb1201ca737bd18ad
2021-02-05NAT44ed: Add pure throuhput bidir testsVratko Polak3-40/+87
+ With ramp-up, without reset, with session verification. + Uses the same profile as pps tests. + Ramp up duration is not specified, as duration is computed. + Timeout tracking with automated ramp-up. + Correct computation of next duration. + Checking both early and late sessions. + No loss measurement also acts as a ramp-up. + Return ReceiveRateMeasurement from send_traffic_on_tg_internal, as that is needed for detecting whether trial is ok as ramp up. - Udp needs quite low ramp-up rate after recent regression. - Max scale has higher rate (so failing) to avoid session timeouts. + Bump copyright year. Change-Id: I50c928659cd5b985b490a2e5fb69c5cd790600b0 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2021-01-21Reconf: Fix bidir/unidir mismatchVratko Polak1-14/+15
Results if NDR search is in TPS (so unidir) since https://gerrit.fd.io/r/c/csit/+/28208 The bug was causing all reconf tests report zero loss, as they used half of NDR load during reconfiguration. + Small improvements to descriptions of other traffic keywords. Change-Id: Ib9af5861cc09e698eb762feb3f0a019571d17962 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2021-01-14perf: GENEVE tunnel test, l3 modeJan Gelety2-3/+5
Jira: CSIT-1768 Change-Id: I888ae1a5754fa07297d4cdf65c2be0e3e49d89a5 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2021-01-11tests: add 2n1l l2 acl tests, update 2n-tx2 specsJuraj Linkeš1-7/+12
Modify initialize L2BD ACL keywords to be usable for both 2-node and 3-node topologies and update testsuites accordingly. Add the missing macip T-rex profile. Add classifier tests to 2n-tx2 job specs. Change-Id: I17b84b8fc18ef9a6f275ae0238a0665ac2017f01 Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
2020-12-21fix: geneveJan Gelety1-3/+3
Change-Id: I23541e1c07a42b4baa560c343ffeed3b963fe694 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2021-01-04API: deprecated COP APIsTomas Alexy1-1/+1
Signed-off-by: Tomas Alexy <tomas.alexy@pantheon.tech> Change-Id: Ifb97088a26f3c2ab2ecee28ed43e6e957a844c64
2021-01-04GSO: TAP/VHOST use casepmikus6-29/+310
Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: Ibafaaca4438587284d1e255c764f0701002941e8
2020-12-18Keep robot example lines shortVratko Polak1-12/+12
Do not expand argument expressions into actual verbose values. Change-Id: I3d86cd826e9cd03cefefe2e197250f76414ac101 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2020-12-18API: deprecated bond APIsJan Gelety3-18/+19
Jira: CSIT-1597 Change-Id: I77b746584851331d46eca1caafd4468d18f1e78d Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-12-17PAPI: Cache connected client instancesVratko Polak1-0/+4
Disconnect+connect cycle is expensive and slow. This change tracks connected client instances so later "connect" to the same target uses it. Explicit disconnects are allowed (and executed before VPP ends), but once again disconnected instances are cached and reused, as creating a new instance is more expensive than just connect. + Add missing checks on interfaces being up to appropriate keyword. + Use appropriate keywords. + Add a comment explaining why a simpler keyword is not appropriate. + Improve VPP checks in containers. + Fix the vppctl check to actually work. + Add PAPI check to ensure VPP is really ready. + Delay/reorder checks to make them faster with multiple containers. + Leave some TODOs to improve various lifecycles later. + As we do not stop VPP in test/suite teardown: + One final disconnect is needed, added to __init__.robot teardowns. - Import of the final disconnect keyword is ugly, but it works. - We could use a hashable class for distinguishing node+socket pairs. - Are we connecting to VPP inside VMs? Change-Id: I49cd726740c3e8cae1591c7c84b85a447241228f Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2020-12-16API: deprecated IPSEC APIsJan Gelety1-0/+9
Jira: CSIT-1597 + add ipsec_sa tear down action Change-Id: I4d1e6f26c14e61e8ddc6f29fbf5528a034c84eb0 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-12-03vpp-device: GENEVE tunnel test, l3 modeJan Gelety3-87/+214
Jira: CSIT-1769 Change-Id: I98510cd8e627d7347f77d0032b7bac28f2e36c61 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-12-08Revert "vpp-device: GENEVE tunnel test, l3 mode"Peter Mikus3-214/+87
This reverts commit a9f54ca5080aeef17686f300a6807bf9b46b7c90. Reason for revert: DO NOT MERGE BROKEN TESTS!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! https://logs.fd.io/production/vex-yul-rot-jenkins-1/csit-vpp-device-master-ubuntu1804-1n-skx/9918/archives/log.html.gz Change-Id: I2ce2970a43e5dd7487eeb54d1ccbb149e06cf8fa Signed-off-by: pmikus <pmikus@cisco.com>
2020-12-03vpp-device: GENEVE tunnel test, l3 modeJan Gelety3-87/+214
Jira: CSIT-1769 Change-Id: I0ab906966f760b809b8431530c010a8f0835d62c Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-12-02API: deprecated NAT APIsJan Gelety1-4/+3
Jira: CSIT-1597 Change-Id: Ib48d20ba087bc9828970c3acc081ac6e4447c20c Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-11-25Add rxq_thr optionpmikus1-1/+2
Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I46750f8571d86dc13df95252e8894c4b988efd5c
2020-10-29Support existing test types with ASTFVratko Polak8-713/+1282
+ Add UDP_CPS, TCP_CPS, UDP_PPS and TCP_PPS suites. + Update existing cps traffic profiles. + Add missing traffic profiles. + UDP: + Single burst of 32 packets was confirmed as safe enough for TRex. + Maybe 64 could work, but not enough testing for that. + Multiple bursts have lead to reduced TRex performance, as overlaping bursts (from different client instances) tend to fill up the buffers. + TCP: + Data size set to 11111 bytes, completely arbitrarily. + Results look reasonable, so I have kept that. - MSS not set at all - No tested support for frame size other than 64B. - Frame size does not even factor into TCP profiles. + So other frame sizes are skipped in autogen. + Update tags in related suites. - HOSTS_{n} and SRC_USER_{n} should be unified. - Questionable clarification on difference between IP4BASE and SCALE. + Add NAT state resetters to tests that need them. + Resetter is called (if set) before each measurement. + If ramp-up is detected, resetter is not set. + Rename "mult" argument to "multiplier". + Abstracted from packets to transactions. + Transaction corresponds to profile. + TRex multiplier argument sets target rate in transactions per second. + The familiar STL traffic: + Bidirectional is considered to be 2 packets per transaction. + Unidirectional is considered to be 1 packet per transaction. + The newer ASTF traffic: + 4 subtypes, each has different number of packets per transaction. + For max rate computation: + Packets in the more numerous direction are considered. + Rely on TRex reported traffic duration for ASTF: + Use the server side value. - Client side value is higher by an overhead. - TRex is not sending traffic during that time. + Remove delays from traffic profiles. - Those delays would increase the reprted traffic time. + Support for scale lmited trials. + Only for ASTF profiles, each ASTF profile has limited scale. + Scale defined in suite variables. + For TRex to send all transactions provided duration value is ignored. + The appropriate value is computed in TrafficGenerator. + An ad-hoc time constant is added to match the TRex client side time overhead. + The profile driver receives the computed duration. + Measurement for PLRsearch add a sleep if the computed duration is smaller. + Alternative argument for search algos if scale is limited. + Both need higher timeout to accomodate big scales. + MLRsearch can afford fewer phases. + Added a parameter to optionally shorten the duration. + Use short duration for runtime stats trial and failure stats trial. + Use very large keepalive values in udp profiles to avoid ka packets. + No polling in ASTF profile driver. - Polling could eliminate the time overhead value. + But polling proved to introduce some loss, affecting the results. + Handle duration stretching in ASTF by stopping traffic. + The stop has several steps so that: + The traffic is really stopped entirely. + Late packets do not count (maybe as errors). + Stats are preserved to read for results (and cleared afterwards). + Several quantities added to ReceiveRateMeasurement: + Original target duration is preserved (algos need that). + Input estimate (tps) for early search iterations. + Output estimate (maybe pps) for MRR output. + Strict result (unsent counts as loss) for NDR. + Use L2 counters (opackets, ipackets) where possible. - TRex has trouble processing packets for the L7 ones at high loads. + Remove warmup from profile drivers and keywords. + Suites should call "Send ramp-up traffic" explicitly if needed. + Added parsing for few more counters. + Both to use in formulas or just for debug purposes. - Only 64B cases in autogen, framesize support to be added later. + Latency streams during search can be enabled via PERF_USE_LATENCY env var. + MLRsearch improvments: + Rename argument names to min_rate and max_rate. + Use relative receive rate in initial phase. + PLRsearch improvements: + Careful computation when output (pps) does not match input (tps). + Use geometric distribution (instead of Poisson). + Helps agains math errors. + This should improve estimate stability. - But in practice big losses still lead to significant jumps. + Traffic generator improvements: + send_traffic_on_tg now calls the full set_rate_provider_defaults. + _send_traffic_on_tg_internal for the logic without provider defaults. + As the internal function is re-used by measure() without affecting defaults. + Move _parse_traffic_results just before get_measurement_result. + As the latter uses fields set bu the former, it is now easier to read. + Multiple sources for approximate duration. + Tried from more precise to more available. + Includes logic for _pps tests (added in later change). + Move explicit type conversions to earlier occurences. + Profile driver output field uses semicolons to simplify parsing. + Performance Robot lib file split to several smaller ones. + performance_actions.robot: + Hosts Additional Statistics Action For * keywords. + performance_display.robot: + Hosts keyword for displaying and verifying results. + Change test message to use the correct unit (pps or cps). + performance_limits.robot renamed to performance_vars.robot + Added many keywords, mostly for accessing test variables. + Moved variables for Policer into a new keyword there. + Some keywords need sophisticated logic. - Other are basically Get Variable Value. + But in future more logic can be added, without editing callers. + Documentation for the new keywords acts as a documentation for test variables. + performance_utils.robot has the rest. + Eliminated arguments if the value is in test variable. + Small improvements to documentation. - Still not enough cleanup with respect to arguments and test variables. + Keywords are sorted alphabetically now in each one. + Suites: + Unified variables table: + No colons in comments. + ${n_hosts}, ${n_ports} and use them instead hardcoded numbers. + Add -cps to existing cps suite names. + Remove "trial data overwrite". + Compute max rate as in STL suites. + Each NAT suite has ip4base suite to compare results to. - Those act as indirect TRex calibration. - VPP does not lose packets in those. + Latency in ASTF suites is disabled hard. - As we do not support latency in ASTF profiles yet. + Unidirectional tests governed by suite variable, not an argument. + Write long argument lists vertically. + Prefer to use argument names. + In Python, also the last argument is followed by comma. + It makes renaming and reordering easier. + Similarly applies to prints with long lists of values. + A TODO to update api crc file comments. Change-Id: I84729355edbec051298a9de1162107f88ff5737d Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2020-10-29tests: Add GSO enabled testsMartin Balaz6-12/+64
Change-Id: I409b060f64ae7c6787448ae519fd76d8384e9ffb Signed-off-by: Martin Balaz <martin.balaz@pantheon.tech>
2020-10-23CSIT-1597 NAT44 API: dynamic configJan Gelety1-0/+3
- cover API changes in VPP: https://gerrit.fd.io/r/c/vpp/+/29463 - update vpp stable to version 21.01-rc0~283-g5f4f2081c Change-Id: I079c10e4537448c3b078f22c3fe4ed266a5e2e2c Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-10-19FIX: disable sending IPv6 RA messages from VMsJuraj Linkeš4-10/+10
There were occasional Router Advertisement packets received in a Traffic Generator in VM testcases. Fix by adding config that disables sending IPv6 RA messages on interfaces in VM VPP config before enabling them. Also rename related keywords and change descriptions based on https://docs.fd.io/vpp/21.01/db/d4c/clicmd_src_vnet_ip6-nd.html#clicmd_ip6_nd Change-Id: I1c2a33337ac91f6039d287b4c2aac388e3a52383 Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
2020-10-19Tests: Remove GBPpmikus2-101/+0
- Specs - Tests - Library - TODO: PAL Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I8890940d56c7a9924d4a5f9365b6bb881610db14
2020-09-12Test: Add ramp-up phase to nat44ed-udir testsJan Gelety1-1/+33
Change-Id: I3aa50ec1ef9b0445014daa31e767323060f4a03f Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-09-30Framework: Add possibility to send ramp-up trafficJan Gelety2-22/+43
Change-Id: Ie24184ca4ac2d6c7abc32f0f103e10bc402ad93b Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-09-30Framework: main heap size value multiplicationJan Gelety2-1/+5
- default value for main heap size set to 2G - allow allocation of n x 2G in tests that need it Change-Id: I02dafe6bc61649d2823486a3e983f66f5a213a88 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-09-24test: nat44det - add session number checkJan Gelety3-4/+37
- some tests need to reduce rate for ramp-up phase - some tests need to extend trail duration in ramp-up phase - removed 2n1l-10ge2p1x710-ethip4udp-nat44det-h1-p63-s63 suite as nat out ports are randomly selected from available port range so T-Rex stateless is not able to provide required out2in traffic Change-Id: I1145496610d202f81d911e68aa819844d7600918 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-09-23FIX: Race conditionpmikus1-0/+2
avf tests works, but vfio-pci tests are following, the interfaces must be in down state (ideally unbind, as vpp cannot pick them). Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I77af85ec4239059a5455ef68683ca129548bd7bd
2020-09-22Framework: Heapsize configurationpmikus1-3/+4
- https://gerrit.fd.io/r/c/vpp/+/28829 - https://gerrit.fd.io/r/c/vpp/+/28896 - ip6 to be added later Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I7b03b8ace5c5c7582d4a2f66bfd788a3ec80a916
2020-09-11Add ipsec async mode performance test casesYulong Pei1-0/+8
In VPP 20.05, vpp added async crypto engine that support to use QAT hardware to do encryption and decryption, vnet/ipsec enabled async mode to use async crypto engine. Current async crypto engine also use dpdk_cryptodev as async handlers, in the future it may add other native QAT driver as async handlers. Note that async crypto engine is to support vnet/ipsec, it is different with current existing dpdk backend which itself has ESP implementation in plugins/dpdk/ipsec. Change-Id: I4e6eaa7ca1eddb8b1c45212de0684fb26907119b Signed-off-by: Yulong Pei <yulong.pei@intel.com>
2020-09-07VPP-DEV API COV: Add NAT44-ED testsJan Gelety2-1/+54
Jira: CSIT-1755 Change-Id: I34baa22a49f44da3fa80d91fa2f4132c982fe610 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-09-03Framework: Code aligmentspmikus3-6/+18
+ Unifying code structures - To easily plug another DUT + New PCI PassThrough templates + Improved perf stat on cores allocated in test. Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I325f17b977314f93cb91818feddfddf3e607eb8a
2020-09-03Framework: Bump DPDK 20.08pmikus2-4/+10
+ DPDK 20.08 + Migrate make -> meson + Fix all trending issues Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I31dcb22627c0f8d17ec63c5b138a2da958b006f4
2020-08-08Fix: NAT44 deterministic moved to separate det44 pluginJan Gelety2-47/+88
- align CSIT code with VPP code changes for NAT44 deterministic (DET44) feature - align test names according to snat44ed tests - remove obsolete 3-node nat tests - remove 2n1l-10ge2p1x710-ethip4udp-snat44det-h1048576-p63-s66060288 tests (not enough memory for such high number of sessions) Change-Id: I9a22b99b4cfa56d18e9c7ef9c58296e202567d42 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-08-20Fix: Use new-style interface variablesVratko Polak2-6/+6
The old-style variables contain None in some places, mainly in SRv6 proxy tests. Change-Id: If3887a7dba051454c504b345a6a316d5d69d0139 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2020-08-07Perf: NAT44 endpoint-dependent mode - udp, part IJan Gelety6-185/+313
- continuation of https://gerrit.fd.io/r/c/csit/+/26898 as there was reached limit of changes (1000) Jira: CSIT-1711 - udp synthetic profiles w/o data packets - udp cps perf tests, phase I (no special "search cps" KW) Part I means that we are using MRR tests to collect traffic data until there is ready new CPS test type with corresponding algorithm. Change-Id: I0d30feb9ecf1d0bff937152656f8eb422f831378 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-08-17Framework: Profiles loadpmikus2-1/+64
Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: Iab84aff31a23bb9d8e1165f5314004803fd8a501
2020-08-17Measure latency only in special casesVratko Polak1-1/+1
+ Measure latency in 90/50/10/0% PDR loads in ndrpdr tests. + Do not measure latency anywhere else. - Needs manual editing to re-enable in soak tests. Change-Id: I69fa11bfcf71012f683061c5effea52a1be91620 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2020-07-23T-Rex: Add advanced stateful modeJan Gelety3-27/+32
- provide base routines to run T-Rex in advanced stateful mode Change-Id: Ib0dc5f2919c370753335f6446860683dc4b12d93 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-07-31Framework: Perf stat capturingPeter Mikus2-8/+17
Change-Id: I3bbe1fe0073ddeead5219993675f24955e8c3dfd Signed-off-by: Peter Mikus <pmikus@cisco.com>
2020-07-30Introduce per DUT configurable statspmikus1-17/+65
- test/suite/global - binary logic is not working Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: Ia3d81cbf2c5f04d1093a0a408c84a9ffc6f3eef0
2020-07-24NDRPDR: Allow smaller min_rate, 9001 ppsVratko Polak1-12/+16
+ Latency measurements need more than 9000 pps. - Previously 0% measurement used 9500 pps. Change-Id: Ic0841de096dfa8a61329f98aa1ba6d3f0ce60c66 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2020-07-16Remove remains of WRK testsTibor Frank4-189/+0
Change-Id: If61783fb717757c6189f06924412bd079e15a08f Signed-off-by: Tibor Frank <tifrank@cisco.com>
2020-07-13Soak: Fix failure conditionVratko Polak1-3/+3
Previously, number of directions was not taken into account. Also, ideally PLRsearch never reports value under the hard minimum, so successful results are now required to be more than 10% better. Change-Id: I8622726b97bd1da3e139c8044a2932837fc268b7 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2020-07-09Framework: Allow change of MRR settingspmikus1-24/+39
Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: Ie88f0df239725a4de62d727e1923cdb3ad040809
2020-06-30make graph node variant can be configured from gerrit triggerYulong Pei1-0/+1
for example, below will trigger VPP with default code path test in CSIT, "csit-2n-clx-perftest mrrAND64bANDnic_intel-xxv710ANDeth-l2bdbasemaclrnNOTdrv_avf" and below will trigger VPP with avx512 code path test in CSIT, "csit-2n-clx-perftest icl mrrAND64bANDnic_intel-xxv710ANDeth-l2bdbasemaclrnNOTdrv_avf" Change-Id: Id3abf932203ce00f34f8643c5bc4d5fc4d3e6efb Signed-off-by: Yulong Pei <yulong.pei@intel.com>
2020-06-10NAT44 EI testsMaros Mullner1-18/+46
Signed-off-by: Maros Mullner <maros.mullner@pantheon.tech> Change-Id: Ib5f58f60a1409ed139e2846793bf52fdc02a6571
2020-06-03FIX: IP4 IP6 3n-onlypmikus2-3/+3
ARP not resolved as ARP plugin is not in use. Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I655d39794f99e32a2f3905154d78e83853356ccf