aboutsummaryrefslogtreecommitdiffstats
path: root/resources/libraries/robot
AgeCommit message (Collapse)AuthorFilesLines
2020-10-23CSIT-1597 NAT44 API: dynamic configJan Gelety1-0/+3
- cover API changes in VPP: https://gerrit.fd.io/r/c/vpp/+/29463 - update vpp stable to version 21.01-rc0~283-g5f4f2081c Change-Id: I079c10e4537448c3b078f22c3fe4ed266a5e2e2c Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-10-19FIX: disable sending IPv6 RA messages from VMsJuraj Linkeš4-10/+10
There were occasional Router Advertisement packets received in a Traffic Generator in VM testcases. Fix by adding config that disables sending IPv6 RA messages on interfaces in VM VPP config before enabling them. Also rename related keywords and change descriptions based on https://docs.fd.io/vpp/21.01/db/d4c/clicmd_src_vnet_ip6-nd.html#clicmd_ip6_nd Change-Id: I1c2a33337ac91f6039d287b4c2aac388e3a52383 Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
2020-10-19Tests: Remove GBPpmikus2-101/+0
- Specs - Tests - Library - TODO: PAL Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I8890940d56c7a9924d4a5f9365b6bb881610db14
2020-09-12Test: Add ramp-up phase to nat44ed-udir testsJan Gelety1-1/+33
Change-Id: I3aa50ec1ef9b0445014daa31e767323060f4a03f Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-09-30Framework: Add possibility to send ramp-up trafficJan Gelety2-22/+43
Change-Id: Ie24184ca4ac2d6c7abc32f0f103e10bc402ad93b Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-09-30Framework: main heap size value multiplicationJan Gelety2-1/+5
- default value for main heap size set to 2G - allow allocation of n x 2G in tests that need it Change-Id: I02dafe6bc61649d2823486a3e983f66f5a213a88 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-09-24test: nat44det - add session number checkJan Gelety3-4/+37
- some tests need to reduce rate for ramp-up phase - some tests need to extend trail duration in ramp-up phase - removed 2n1l-10ge2p1x710-ethip4udp-nat44det-h1-p63-s63 suite as nat out ports are randomly selected from available port range so T-Rex stateless is not able to provide required out2in traffic Change-Id: I1145496610d202f81d911e68aa819844d7600918 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-09-23FIX: Race conditionpmikus1-0/+2
avf tests works, but vfio-pci tests are following, the interfaces must be in down state (ideally unbind, as vpp cannot pick them). Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I77af85ec4239059a5455ef68683ca129548bd7bd
2020-09-22Framework: Heapsize configurationpmikus1-3/+4
- https://gerrit.fd.io/r/c/vpp/+/28829 - https://gerrit.fd.io/r/c/vpp/+/28896 - ip6 to be added later Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I7b03b8ace5c5c7582d4a2f66bfd788a3ec80a916
2020-09-11Add ipsec async mode performance test casesYulong Pei1-0/+8
In VPP 20.05, vpp added async crypto engine that support to use QAT hardware to do encryption and decryption, vnet/ipsec enabled async mode to use async crypto engine. Current async crypto engine also use dpdk_cryptodev as async handlers, in the future it may add other native QAT driver as async handlers. Note that async crypto engine is to support vnet/ipsec, it is different with current existing dpdk backend which itself has ESP implementation in plugins/dpdk/ipsec. Change-Id: I4e6eaa7ca1eddb8b1c45212de0684fb26907119b Signed-off-by: Yulong Pei <yulong.pei@intel.com>
2020-09-07VPP-DEV API COV: Add NAT44-ED testsJan Gelety2-1/+54
Jira: CSIT-1755 Change-Id: I34baa22a49f44da3fa80d91fa2f4132c982fe610 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-09-03Framework: Code aligmentspmikus3-6/+18
+ Unifying code structures - To easily plug another DUT + New PCI PassThrough templates + Improved perf stat on cores allocated in test. Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I325f17b977314f93cb91818feddfddf3e607eb8a
2020-09-03Framework: Bump DPDK 20.08pmikus2-4/+10
+ DPDK 20.08 + Migrate make -> meson + Fix all trending issues Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I31dcb22627c0f8d17ec63c5b138a2da958b006f4
2020-08-08Fix: NAT44 deterministic moved to separate det44 pluginJan Gelety2-47/+88
- align CSIT code with VPP code changes for NAT44 deterministic (DET44) feature - align test names according to snat44ed tests - remove obsolete 3-node nat tests - remove 2n1l-10ge2p1x710-ethip4udp-snat44det-h1048576-p63-s66060288 tests (not enough memory for such high number of sessions) Change-Id: I9a22b99b4cfa56d18e9c7ef9c58296e202567d42 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-08-20Fix: Use new-style interface variablesVratko Polak2-6/+6
The old-style variables contain None in some places, mainly in SRv6 proxy tests. Change-Id: If3887a7dba051454c504b345a6a316d5d69d0139 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2020-08-07Perf: NAT44 endpoint-dependent mode - udp, part IJan Gelety6-185/+313
- continuation of https://gerrit.fd.io/r/c/csit/+/26898 as there was reached limit of changes (1000) Jira: CSIT-1711 - udp synthetic profiles w/o data packets - udp cps perf tests, phase I (no special "search cps" KW) Part I means that we are using MRR tests to collect traffic data until there is ready new CPS test type with corresponding algorithm. Change-Id: I0d30feb9ecf1d0bff937152656f8eb422f831378 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-08-17Framework: Profiles loadpmikus2-1/+64
Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: Iab84aff31a23bb9d8e1165f5314004803fd8a501
2020-08-17Measure latency only in special casesVratko Polak1-1/+1
+ Measure latency in 90/50/10/0% PDR loads in ndrpdr tests. + Do not measure latency anywhere else. - Needs manual editing to re-enable in soak tests. Change-Id: I69fa11bfcf71012f683061c5effea52a1be91620 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2020-07-23T-Rex: Add advanced stateful modeJan Gelety3-27/+32
- provide base routines to run T-Rex in advanced stateful mode Change-Id: Ib0dc5f2919c370753335f6446860683dc4b12d93 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-07-31Framework: Perf stat capturingPeter Mikus2-8/+17
Change-Id: I3bbe1fe0073ddeead5219993675f24955e8c3dfd Signed-off-by: Peter Mikus <pmikus@cisco.com>
2020-07-30Introduce per DUT configurable statspmikus1-17/+65
- test/suite/global - binary logic is not working Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: Ia3d81cbf2c5f04d1093a0a408c84a9ffc6f3eef0
2020-07-24NDRPDR: Allow smaller min_rate, 9001 ppsVratko Polak1-12/+16
+ Latency measurements need more than 9000 pps. - Previously 0% measurement used 9500 pps. Change-Id: Ic0841de096dfa8a61329f98aa1ba6d3f0ce60c66 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2020-07-16Remove remains of WRK testsTibor Frank4-189/+0
Change-Id: If61783fb717757c6189f06924412bd079e15a08f Signed-off-by: Tibor Frank <tifrank@cisco.com>
2020-07-13Soak: Fix failure conditionVratko Polak1-3/+3
Previously, number of directions was not taken into account. Also, ideally PLRsearch never reports value under the hard minimum, so successful results are now required to be more than 10% better. Change-Id: I8622726b97bd1da3e139c8044a2932837fc268b7 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2020-07-09Framework: Allow change of MRR settingspmikus1-24/+39
Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: Ie88f0df239725a4de62d727e1923cdb3ad040809
2020-06-30make graph node variant can be configured from gerrit triggerYulong Pei1-0/+1
for example, below will trigger VPP with default code path test in CSIT, "csit-2n-clx-perftest mrrAND64bANDnic_intel-xxv710ANDeth-l2bdbasemaclrnNOTdrv_avf" and below will trigger VPP with avx512 code path test in CSIT, "csit-2n-clx-perftest icl mrrAND64bANDnic_intel-xxv710ANDeth-l2bdbasemaclrnNOTdrv_avf" Change-Id: Id3abf932203ce00f34f8643c5bc4d5fc4d3e6efb Signed-off-by: Yulong Pei <yulong.pei@intel.com>
2020-06-10NAT44 EI testsMaros Mullner1-18/+46
Signed-off-by: Maros Mullner <maros.mullner@pantheon.tech> Change-Id: Ib5f58f60a1409ed139e2846793bf52fdc02a6571
2020-06-03FIX: IP4 IP6 3n-onlypmikus2-3/+3
ARP not resolved as ARP plugin is not in use. Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I655d39794f99e32a2f3905154d78e83853356ccf
2020-05-07FIX: SRv6 encapJan Gelety1-1/+2
Change-Id: I4b75b343fc144489d81f82dbb4917b4a70a9911b Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-05-07perf: refactor 'setup suite topology interfaces'Dave Wallace1-58/+33
- and 'setup suite topology interfaces no tg' to use a common keyword to create suite variables using the required topology information. Change-Id: I46894948bc86eb7ce72d036e5b84f09c5c1385db Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2020-05-06FIX: dot1q-ip6pmikus1-1/+1
Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: Ied48646bd9de41e5a55e0006440d057c5fddf694
2020-05-04FIX: IPsecvagrant1-4/+0
Signed-off-by: Peter Mikus <pmikus@cisco.com> Change-Id: Iacd7aa49d9832233033fe18fc228ccd45c12b4db
2020-05-04VPP-DEV API Coverages: SRv6Jan Gelety2-77/+198
Jira: CSIT-1698 Change-Id: I6d9154284990df8877850e4014716510016e485b Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-04-29FIX: dot1qip4vxlan-l2bdPeter Mikus1-2/+2
Signed-off-by: Peter Mikus <pmikus@cisco.com> Change-Id: Ia4415090263357d16cfd5f5bc93931ded5688557
2020-04-28CSIT-1597 API cleanup: lispJan Gelety3-503/+79
- cover API changes in VPP: https://gerrit.fd.io/r/c/vpp/+/24663 - update vpp stable to version 20.05-rc0~637 - remove unused L1 and L2 lisp KWs Change-Id: I2672b6a375ad70c82f331dcc991c145e868108b9 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-04-27Performance: MLX best practicePeter Mikus1-2/+11
- Part II Signed-off-by: Peter Mikus <pmikus@cisco.com> Change-Id: I869a3d7e051dcbae3a230d4646219e70e5de2e87
2020-04-27Performance: TRex approximatedDuration and approximateRatePeter Mikus1-2/+6
- API to provide duration for send and receive traffic Signed-off-by: Peter Mikus <pmikus@cisco.com> Change-Id: Id186a200be66b7703348e6fd3099ffd405e915ae
2020-04-27FIX: NF_density IPv4 profilePeter Mikus1-2/+2
Signed-off-by: Peter Mikus <pmikus@cisco.com> Change-Id: I471c0cb98c24416d893248b55b376b03a4b8830a
2020-04-27FIX: NAT44 3-node testsPeter Mikus1-1/+1
Signed-off-by: Peter Mikus <pmikus@cisco.com> Change-Id: I3d9074175e1aaf5afba4e351790644df4ad33914
2020-04-23Fix 3n ip4 scale initVratko Polak1-1/+1
Last argument to Vpp Add Ip Neighbor should be a MAC address. Change-Id: Ia93ddf68aa2b8647c66b6a72210db3a8a01b81fb Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2020-04-23FIX: Mellanox jumbo framesPeter Mikus1-0/+20
Signed-off-by: Peter Mikus <pmikus@cisco.com> Change-Id: I84b3c07e22a313e96ac59fc7818960c502507651
2020-04-23Performance: DPDK refactorPeter Mikus3-15/+15
+ Rework BASH scripts (more code to python). + Move BASH into libraries. + Allows RDMA usage. + Fix 9000B tests. + Rename confusing l2fwd -> testpmd. + Fix suite setup. + Fix PCI whitelist to not accidentally pickup wrong interface. + Fix deprecated DPDK cli arguments. - MLX5 jumbo are disabled on NIC (i will increase separately). https://jenkins.fd.io/job/csit-dpdk-perf-verify-master-2n-clx/6/console (l3fwd still broken) - MLX5 IMIX seems to be some TRex issue with IMIX for mlx5 (i will handle separately) Signed-off-by: Peter Mikus <pmikus@cisco.com> Change-Id: I31d1b67305fa247cb5e1f57e739d3ef30dc1a04b
2020-04-22FIX: NF_density MAC addressesPeter Mikus2-12/+12
Signed-off-by: Peter Mikus <pmikus@cisco.com> Change-Id: I0e773060c344fda7b06937a81a53863a96a4373a
2020-04-20FIX: NF_density testsPeter Mikus1-5/+7
Signed-off-by: Peter Mikus <pmikus@cisco.com> Change-Id: Ic305d135b14697332436d6afd76173eff0c3874b
2020-03-31FIX: ip4Jan Gelety1-1/+1
Change-Id: I57fcb06c72caf517231f09478d9d6089d2f46af4 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-04-17FIX: Proper NUMA computePeter Mikus1-1/+1
+ FIX for Vratko's FIX Change-Id: Ia6ff137120d84bdd2b9e02e3e935c62d1c732b7b Signed-off-by: Peter Mikus <pmikus@cisco.com>
2020-04-17Fix numa detectionVratko Polak1-1/+1
On 3n-hsw, xl-710 is numa 1. The old code returned 0, causing performance regression. Fixes: 14a71b74b414df7616ccb5ada3d50ecb90d96bae Change-Id: I81d3f711b6a37438f6411e29baafae9dec1c00a4 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2020-04-17VPP-DEV API Coverages: IPSEC interfaceJan Gelety2-9/+80
+ some pylint fixies Change-Id: I650ce16282ae953a1a5ee96e810702c01f71efd6 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-04-08FIX: Add show log output when test failed.Peter Mikus1-1/+3
Signed-off-by: Peter Mikus <pmikus@cisco.com> Change-Id: I6bdce8156ba214be210c195a9f3effd718301a86
2020-04-06Improve pf layerPeter Mikus24-1756/+1355
+ Merge single/double link + Introduce _pf{n}[0] variables so we can access physical function same way as virtual function + Cleanup code by moving complex logic to python + Prepare code for multiple vf functions Signed-off-by: Peter Mikus <pmikus@cisco.com> Change-Id: Ic2e74a38bfa146441357de8f0916aeb638941c49