aboutsummaryrefslogtreecommitdiffstats
path: root/resources/libraries/robot
AgeCommit message (Collapse)AuthorFilesLines
2020-08-07Perf: NAT44 endpoint-dependent mode - udp, part IJan Gelety6-185/+313
- continuation of https://gerrit.fd.io/r/c/csit/+/26898 as there was reached limit of changes (1000) Jira: CSIT-1711 - udp synthetic profiles w/o data packets - udp cps perf tests, phase I (no special "search cps" KW) Part I means that we are using MRR tests to collect traffic data until there is ready new CPS test type with corresponding algorithm. Change-Id: I0d30feb9ecf1d0bff937152656f8eb422f831378 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-08-17Framework: Profiles loadpmikus2-1/+64
Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: Iab84aff31a23bb9d8e1165f5314004803fd8a501
2020-08-17Measure latency only in special casesVratko Polak1-1/+1
+ Measure latency in 90/50/10/0% PDR loads in ndrpdr tests. + Do not measure latency anywhere else. - Needs manual editing to re-enable in soak tests. Change-Id: I69fa11bfcf71012f683061c5effea52a1be91620 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2020-07-23T-Rex: Add advanced stateful modeJan Gelety3-27/+32
- provide base routines to run T-Rex in advanced stateful mode Change-Id: Ib0dc5f2919c370753335f6446860683dc4b12d93 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-07-31Framework: Perf stat capturingPeter Mikus2-8/+17
Change-Id: I3bbe1fe0073ddeead5219993675f24955e8c3dfd Signed-off-by: Peter Mikus <pmikus@cisco.com>
2020-07-30Introduce per DUT configurable statspmikus1-17/+65
- test/suite/global - binary logic is not working Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: Ia3d81cbf2c5f04d1093a0a408c84a9ffc6f3eef0
2020-07-24NDRPDR: Allow smaller min_rate, 9001 ppsVratko Polak1-12/+16
+ Latency measurements need more than 9000 pps. - Previously 0% measurement used 9500 pps. Change-Id: Ic0841de096dfa8a61329f98aa1ba6d3f0ce60c66 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2020-07-16Remove remains of WRK testsTibor Frank4-189/+0
Change-Id: If61783fb717757c6189f06924412bd079e15a08f Signed-off-by: Tibor Frank <tifrank@cisco.com>
2020-07-13Soak: Fix failure conditionVratko Polak1-3/+3
Previously, number of directions was not taken into account. Also, ideally PLRsearch never reports value under the hard minimum, so successful results are now required to be more than 10% better. Change-Id: I8622726b97bd1da3e139c8044a2932837fc268b7 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2020-07-09Framework: Allow change of MRR settingspmikus1-24/+39
Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: Ie88f0df239725a4de62d727e1923cdb3ad040809
2020-06-30make graph node variant can be configured from gerrit triggerYulong Pei1-0/+1
for example, below will trigger VPP with default code path test in CSIT, "csit-2n-clx-perftest mrrAND64bANDnic_intel-xxv710ANDeth-l2bdbasemaclrnNOTdrv_avf" and below will trigger VPP with avx512 code path test in CSIT, "csit-2n-clx-perftest icl mrrAND64bANDnic_intel-xxv710ANDeth-l2bdbasemaclrnNOTdrv_avf" Change-Id: Id3abf932203ce00f34f8643c5bc4d5fc4d3e6efb Signed-off-by: Yulong Pei <yulong.pei@intel.com>
2020-06-10NAT44 EI testsMaros Mullner1-18/+46
Signed-off-by: Maros Mullner <maros.mullner@pantheon.tech> Change-Id: Ib5f58f60a1409ed139e2846793bf52fdc02a6571
2020-06-03FIX: IP4 IP6 3n-onlypmikus2-3/+3
ARP not resolved as ARP plugin is not in use. Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I655d39794f99e32a2f3905154d78e83853356ccf
2020-05-07FIX: SRv6 encapJan Gelety1-1/+2
Change-Id: I4b75b343fc144489d81f82dbb4917b4a70a9911b Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-05-07perf: refactor 'setup suite topology interfaces'Dave Wallace1-58/+33
- and 'setup suite topology interfaces no tg' to use a common keyword to create suite variables using the required topology information. Change-Id: I46894948bc86eb7ce72d036e5b84f09c5c1385db Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2020-05-06FIX: dot1q-ip6pmikus1-1/+1
Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: Ied48646bd9de41e5a55e0006440d057c5fddf694
2020-05-04FIX: IPsecvagrant1-4/+0
Signed-off-by: Peter Mikus <pmikus@cisco.com> Change-Id: Iacd7aa49d9832233033fe18fc228ccd45c12b4db
2020-05-04VPP-DEV API Coverages: SRv6Jan Gelety2-77/+198
Jira: CSIT-1698 Change-Id: I6d9154284990df8877850e4014716510016e485b Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-04-29FIX: dot1qip4vxlan-l2bdPeter Mikus1-2/+2
Signed-off-by: Peter Mikus <pmikus@cisco.com> Change-Id: Ia4415090263357d16cfd5f5bc93931ded5688557
2020-04-28CSIT-1597 API cleanup: lispJan Gelety3-503/+79
- cover API changes in VPP: https://gerrit.fd.io/r/c/vpp/+/24663 - update vpp stable to version 20.05-rc0~637 - remove unused L1 and L2 lisp KWs Change-Id: I2672b6a375ad70c82f331dcc991c145e868108b9 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-04-27Performance: MLX best practicePeter Mikus1-2/+11
- Part II Signed-off-by: Peter Mikus <pmikus@cisco.com> Change-Id: I869a3d7e051dcbae3a230d4646219e70e5de2e87
2020-04-27Performance: TRex approximatedDuration and approximateRatePeter Mikus1-2/+6
- API to provide duration for send and receive traffic Signed-off-by: Peter Mikus <pmikus@cisco.com> Change-Id: Id186a200be66b7703348e6fd3099ffd405e915ae
2020-04-27FIX: NF_density IPv4 profilePeter Mikus1-2/+2
Signed-off-by: Peter Mikus <pmikus@cisco.com> Change-Id: I471c0cb98c24416d893248b55b376b03a4b8830a
2020-04-27FIX: NAT44 3-node testsPeter Mikus1-1/+1
Signed-off-by: Peter Mikus <pmikus@cisco.com> Change-Id: I3d9074175e1aaf5afba4e351790644df4ad33914
2020-04-23Fix 3n ip4 scale initVratko Polak1-1/+1
Last argument to Vpp Add Ip Neighbor should be a MAC address. Change-Id: Ia93ddf68aa2b8647c66b6a72210db3a8a01b81fb Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2020-04-23FIX: Mellanox jumbo framesPeter Mikus1-0/+20
Signed-off-by: Peter Mikus <pmikus@cisco.com> Change-Id: I84b3c07e22a313e96ac59fc7818960c502507651
2020-04-23Performance: DPDK refactorPeter Mikus3-15/+15
+ Rework BASH scripts (more code to python). + Move BASH into libraries. + Allows RDMA usage. + Fix 9000B tests. + Rename confusing l2fwd -> testpmd. + Fix suite setup. + Fix PCI whitelist to not accidentally pickup wrong interface. + Fix deprecated DPDK cli arguments. - MLX5 jumbo are disabled on NIC (i will increase separately). https://jenkins.fd.io/job/csit-dpdk-perf-verify-master-2n-clx/6/console (l3fwd still broken) - MLX5 IMIX seems to be some TRex issue with IMIX for mlx5 (i will handle separately) Signed-off-by: Peter Mikus <pmikus@cisco.com> Change-Id: I31d1b67305fa247cb5e1f57e739d3ef30dc1a04b
2020-04-22FIX: NF_density MAC addressesPeter Mikus2-12/+12
Signed-off-by: Peter Mikus <pmikus@cisco.com> Change-Id: I0e773060c344fda7b06937a81a53863a96a4373a
2020-04-20FIX: NF_density testsPeter Mikus1-5/+7
Signed-off-by: Peter Mikus <pmikus@cisco.com> Change-Id: Ic305d135b14697332436d6afd76173eff0c3874b
2020-03-31FIX: ip4Jan Gelety1-1/+1
Change-Id: I57fcb06c72caf517231f09478d9d6089d2f46af4 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-04-17FIX: Proper NUMA computePeter Mikus1-1/+1
+ FIX for Vratko's FIX Change-Id: Ia6ff137120d84bdd2b9e02e3e935c62d1c732b7b Signed-off-by: Peter Mikus <pmikus@cisco.com>
2020-04-17Fix numa detectionVratko Polak1-1/+1
On 3n-hsw, xl-710 is numa 1. The old code returned 0, causing performance regression. Fixes: 14a71b74b414df7616ccb5ada3d50ecb90d96bae Change-Id: I81d3f711b6a37438f6411e29baafae9dec1c00a4 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2020-04-17VPP-DEV API Coverages: IPSEC interfaceJan Gelety2-9/+80
+ some pylint fixies Change-Id: I650ce16282ae953a1a5ee96e810702c01f71efd6 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-04-08FIX: Add show log output when test failed.Peter Mikus1-1/+3
Signed-off-by: Peter Mikus <pmikus@cisco.com> Change-Id: I6bdce8156ba214be210c195a9f3effd718301a86
2020-04-06Improve pf layerPeter Mikus24-1756/+1355
+ Merge single/double link + Introduce _pf{n}[0] variables so we can access physical function same way as virtual function + Cleanup code by moving complex logic to python + Prepare code for multiple vf functions Signed-off-by: Peter Mikus <pmikus@cisco.com> Change-Id: Ic2e74a38bfa146441357de8f0916aeb638941c49
2020-03-19perf: Fix broken hoststack testsDave Wallace1-2/+2
- Rename NSIM attribute names as changed in b9f4ba11 Change-Id: I6bc232c9954cfd9004d1d0cf22446957e78a641a Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2020-03-18FIX: qsz typoPeter Mikus1-2/+2
Signed-off-by: Peter Mikus <pmikus@cisco.com> Change-Id: I56e87868de0bb45e863f1d806e2efc3f5ec5df96
2020-03-17FIX: VHOST vppPeter Mikus1-7/+7
Signed-off-by: Peter Mikus <pmikus@cisco.com> Change-Id: Id0d41a2e62ee6cce212fb2c09a0357d794426a00
2020-03-10Make RXQs/TXQs configurablePeter Mikus2-10/+15
Change-Id: Ib30bc4697fcba93a6723ee492a59a0523425f623 Signed-off-by: Peter Mikus <pmikus@cisco.com>
2020-03-10Clean up long lines in nsim.robotDave Wallace1-16/+22
Change-Id: Ic9def0376ecb49c12e63aafa747fcc524ebb79c2 Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2020-03-09CSIT-1597 API cleanup: l2Jan Gelety1-2/+1
- cover API changes in VPP: https://gerrit.fd.io/r/c/vpp/+/22970 - update vpp stable to version 20.05-rc0~307 Change-Id: I3b4c69ee60b0add12edeb8d5e6ac6006b519593b Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-03-03perf: Clean up Hoststack testsDave Wallace1-14/+14
- Update test names with clients/streams - Convert test results to JSON output * iperf3 results include bits_per_second * vpp_echo results include both client and server output which includes time in seconds and rx_data/tx_data in bytes which can be used to calculate the average bits per second. Tx and Rx data will always be the same: BPS = (client tx_data * 8) / ((client time + server time) / 2) - Fix WRK test results data formatting errors Change-Id: Ie2aeb665e3cc0739b16f97ba2628eebe6e041d22 Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2020-02-25FIX: check if t-rex is running at test setup of all perf testsJan Gelety1-1/+8
Change-Id: I9af632035a1415666b2470c62a41d1b6acbf33c8 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-02-25FIX: avoid t-rex suite tear down action to fail successfull testsJan Gelety1-1/+1
- try to kill t-rex only if it is running - do not fail the whole test suite when t-rex test suite tear down action has failed Change-Id: I3748a08a3da4dd3617cb54e8fdd344d49566fc7d Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-01-30perf: Add hoststack NSIM+LDPRELOAD+IPERF3 test suiteDave Wallace1-1/+7
Change-Id: Ia7a876b1aa240676e1f2d23618c1d4e09ead14f0 Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2020-01-29Display target_tr for ndr/pdr resultsVratko Polak1-5/+5
Small differences in Tx packet counts can cause the previous way (which used transmit_rate, computed from packets sent and nominal duration) to report lower bounds as higher than upper bounds. Also, reconf tests need the target (not actual) rate. Change-Id: If5222dabd9762b8d9c2e22d875c12ad355bc6838 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2020-01-29Ndrpdr: Remove unused latency measurementsVratko Polak1-23/+14
+ Improve keyword Documentation. + Reorder measurements, higher loads first. Change-Id: I1aeab1c8ada268422e9f421e075aff2ac9eec23f Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2020-01-29perf: QUIC transport hoststack test suiteDave Wallace1-3/+20
Change-Id: I73f4be7ea315c7a5dcce46e1bd3034bcb0a97ee2 Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2020-01-28perf: hoststack iperf3 test tuningDave Wallace4-28/+76
Change-Id: I53425f57fe9ecef9cff2c94642cc7cb24537a961 Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2020-01-28Check interval validity in reconf testsVratko Polak1-0/+2
Without this, if the search part returns min_rate, then reconf part reports few seconds with a small loss count. But min_rate means there is a bug or misconfiguration, so the tests should fail, instead of returning misleading results. Change-Id: I566608b40ae11d6aaa3fe022a32da97901e1999c Signed-off-by: Vratko Polak <vrpolak@cisco.com>