aboutsummaryrefslogtreecommitdiffstats
path: root/resources/libraries
AgeCommit message (Collapse)AuthorFilesLines
2016-05-24Replace linear search with binary searchPeter Mikus1-0/+36
- JIRA: CSIT-97 - Replace linear search with binary search for long performance testing Change-Id: I19cbcf3d9f7f5e6ec5128287b58a2ea3aceff00c Signed-off-by: Peter Mikus <pmikus@cisco.com>
2016-05-24Add test cases with "dpdk no-multi-seg" in vpp startup configPeter Mikus3-21/+115
- JIRA: CSIT-73 - Add ability to configure no-multi-seg parameter in VPP startup configuration - Add keywords to selectively configure parameters in startup configuration - Modify testcases Change-Id: I3c5c0a1cc2b1156d5a87ff36628b50793dd9ac5f Signed-off-by: Peter Mikus <pmikus@cisco.com>
2016-05-23Add temporary fix for CSIT-90 by flushing QGA's input bufferCarsten Koester1-0/+16
This is not a final fix. The final fix SHOULD send a "guest-sync" request as per" http://wiki.qemu.org/Features/QAPI/GuestAgent#QEMU_Guest_Agent_Protocol However, this temporary fix will eliminate the nested VM startup failures triggered by the nested VM's guest-agent receiving a partial guest-ping request. Change-Id: Ice409b7c966a527b03cb71c042b476e1771676d0 Signed-off-by: Carsten Koester <ckoester@cisco.com>
2016-05-23Capture VPP stats for Long and Short testsMiroslav Miklus4-23/+77
JIRA: CSIT-71 - remove warmup for short runs - clear and collect stats for short run - run short test with no failure for long test with NDR/PDR rate Change-Id: I1b8879c3b891165072822207d0781687d8159336 Signed-off-by: Miroslav Miklus <mmiklus@cisco.com>
2016-05-23Patch: Start binary search from max range ratePeter Mikus1-7/+13
- JIRA: CSIT-96 - Add option to start binary search with max range rate value first and then continue the binary search of half interval. Change-Id: Ia6d2f4aa6fc20ca2ee4d43d0ddb3966422b28144 Signed-off-by: Peter Mikus <pmikus@cisco.com>
2016-05-23Performance l2-vlan-dot1q library and short/long test casespmikus2-1/+46
- JIRA: CSIT-59 - create topology with VLAN dot1q sub-interfaces inter-connected using L2 cross connect in 3-node topology - create keywords to be used in test cases - create l2-vlan-dot1q test cases (64B, 1518B, 9000B) Change-Id: Ic5f31b4451965bb7f5d3d5b7061c6600f63da898 Signed-off-by: pmikus <pmikus@cisco.com> Signed-off-by: Peter Mikus <pmikus@cisco.com>
2016-05-20VPP in host user-mode, part IIZdeno Olsovsky1-8/+78
- JIRA: CSIT-61 Change-Id: I688b1013a78a1fa3ecdb44c2072f8bd1b46364fb Signed-off-by: Zdeno Olsovsky <zolsovsk@cisco.com>
2016-05-20Add Honeycomb TAP interface testselias3-3/+173
JIRA: CSIT-75 - add test suite for TAP interface management through Honeycomb - add keywords required for TAP interface tests - move Honeycomb suite setup and teardown to new __init__ file - cleanup unused imports in Honeycomb test case files - modify "...should be empty" keywords to allow more reuse Change-Id: Ie3dc9069678b60c359f69c5a216e452e856a0107 Signed-off-by: selias <samelias@cisco.com>
2016-05-20Tests for vhost-user interface configurationTibor Frank3-0/+198
JIRA: CSIT-76 - add tests for vhost-user interface manipulation: - create, modify, delete - add negative tests: - wrong interface type - wrong configuration Change-Id: I09239ef099a6f9672895f9540762e5044123f7ec Signed-off-by: Tibor Frank <tifrank@cisco.com>
2016-05-18T-REX stl traffic send improvement for async callsMiroslav Miklus4-30/+138
JIRA: CSIT-68 - show runtime statistics with running traffic - T-REX driver async. driver Change-Id: Ie5eb7021f610fb58383b033dda5b1b867f7d3d2c Signed-off-by: Miroslav Miklus <mmiklus@cisco.com>
2016-05-18Patch: Detection of running t-rex instance before initializingPeter Mikus1-0/+3
- JIRA: CSIT-89 - Add detection of running t-rex traffic generator before new instance is initialized. Change-Id: I77009b0c5e83bb6e162b9800d02b4e5a2abd541f Signed-off-by: Peter Mikus <pmikus@cisco.com>
2016-05-16Add Honeycomb VxLAN test suiteselias2-66/+172
JIRA: CSIT-47 - add test suite for VxLAN management through Honeycomb - add keywords required for VxLAN management tests - add resource file with additional variables for testing - increment bridge domain test suite index Change-Id: Ica0d7ae15f5b7058832a944d5ca0c72026ba299c Signed-off-by: selias <samelias@cisco.com>
2016-05-16CSIT-18: Add GRE tunnel libraries and tests.Matej Klotton2-1/+157
Change-Id: I91ccd65a26ea1782611bccc3badd91e64366a162 Signed-off-by: Matej Klotton <mklotton@cisco.com>
2016-05-16Update Honeycomb bridge domain testsselias1-10/+20
- fix interface assignment verification through VAT - add verification of split horizon group setting through VAT - clean up documentation of high level bridge domain keywords Change-Id: I7552494d68c6bbc86d3e5ddea4e29c6a7444d50c Signed-off-by: selias <samelias@cisco.com>
2016-05-16Add keyword to manipulate vhost-user parametersTibor Frank1-0/+68
JIRA: CSIT-70 - add a keyword to be able to: - configure all vhost-user parameters at once - configure vhost-user parameters one by one - remove a vhost-user parameter - remove all vhost-user parameters at once - add a keyword which adds a new vhost-user interface Change-Id: I144bc035b959a1e4eb37c6a3d554e6843ddab4a7 Signed-off-by: Tibor Frank <tifrank@cisco.com>
2016-05-13CSIT-65: Add new test for LISP APIAndrej Kozemcak3-0/+1014
Test set and unset this API: lisp_add_del_locator_set lisp_add_del_locator lisp_add_del_local_eid lisp_add_del_map_resolver lisp_gpe_add_del_iface Change-Id: I9c701fc421d4106147891a7e75e5d68885b9ba59 Signed-off-by: Andrej Kozemcak <akozemca@cisco.com>
2016-05-13Add keyword to manipulate interface TAP parametersTibor Frank1-0/+67
JIRA: CSIT-69 - add a keyword to be able to: - configure all TAP parameters at once - configure TAP parameters one by one - remove a TAP parameter - remove all TAP parameters at once - add a keyword which adds a new TAP interface Change-Id: I5620adc3f777f7a337bbd737e685891b425d4e09 Signed-off-by: Tibor Frank <tifrank@cisco.com>
2016-05-13Add possibility to create a VxLAN interface.Tibor Frank2-12/+85
JIRA: CSIT-51 - add a keyword which adds a new VxLAN interface - change InterfaceUtil.vxlan_dump to be able to return info about all VxLAN interfaces. Change-Id: I8ad3dc1d414924e74ea1ecea1f316ca5c648e2d0 Signed-off-by: Tibor Frank <tifrank@cisco.com>
2016-05-12Add possibility to change VxLAN parameters at onceTibor Frank1-12/+20
JIRA: CSIT-51 - modify existing keyword "configure_interface_vxlan" to be able to: - configure all VxLAN parameters at once - configure VxLAN parameters one by one - remove a parameter - remove all parameters at once Change-Id: I50551fbc3ae5c6aa147d531fc66b583af36bb541 Signed-off-by: Tibor Frank <tifrank@cisco.com>
2016-05-12Update Honeycomb interface IPv4 testselias3-15/+48
- add verification of ipv4 subnet prefix support - modify keywords to allow setting ipv4 address with network prefix - fix variable definitions to evaluate numbers as ints, not strings - add exception to ipv4 netmask/prefix conversion method Change-Id: I9343ceb35856ddb33674d7067f1def6d40e99acc Signed-off-by: selias <samelias@cisco.com>
2016-05-12Add functions to get interface name or index from JSON interface dump.Matej Klotton2-0/+76
Change-Id: I4778c9fa72e418f6fea427f88fd9aa1ea579ac99 Signed-off-by: Matej Klotton <mklotton@cisco.com>
2016-05-11Add library for set path variables for testing.Matej Klotton7-407/+225
Change-Id: Icb243bacc9329c4bf3bc28098fced473b4e3c991 Signed-off-by: Matej Klotton <mklotton@cisco.com>
2016-05-11Performance IPv6 library and short/long test casespmikus3-4/+66
- JIRA: CSIT-2 - Create IPv6 test cases for long/short/singlethread/multithread performance testing - Create robot KWs for IPv6 performance testing - Add T-Rex IPv6 profile Change-Id: I306d5c894d9b9287bf91929764aeb1c7083d802c Signed-off-by: pmikus <pmikus@cisco.com> Signed-off-by: Peter Mikus <pmikus@cisco.com>
2016-05-11Move Honeycomb libraries to honeycomb subdirectory.Tibor Frank8-22/+40
- move all Honeycomb related libraries written in python to new directory resources/libraries/python/honeycomb - update all related includes in all source files Change-Id: Ifa96b8f670b456b14421929d6020ddf8e02d9cbc Signed-off-by: Tibor Frank <tifrank@cisco.com>
2016-05-11Add iACL IPv4/IPv6 tests.Patrik Hrnciar6-2/+263
- IPv4: CSIT-15 - IPv6: CSIT-16 Change-Id: I6e66aa853dfaebf1388f1191dbb63f5216820325 Signed-off-by: Patrik Hrnciar <phrnciar@cisco.com>
2016-05-11Add Max TX Queues configuration to VppConfigGeneratorpmikus1-1/+44
- Add ability to configure max-tx-queus parameter in VPP startup configuration Change-Id: Iaf857ed037c934fbda46eda6bfe1be4ef7faba15 Signed-off-by: pmikus <pmikus@cisco.com>
2016-05-09CSIT-9: COP Whitelist/blacklistZdeno6-3/+298
- Included are also IPv6 tests - JIRA: CSIT-17 Change-Id: I89ae6c38cdc6742a597c0dc24ed1c033c1b5d155 Signed-off-by: Zdeno <zolsovsk@cisco.com>
2016-05-09CSIT-19: MAC split-horizon groupJan Gelety2-3/+77
- test case to test MAC split-horizon group functionality Change-Id: Iadee707f3670e5fc9c209bd8b072a65ea1af27cd Signed-off-by: Jan Gelety <jgelety@cisco.com>
2016-05-09Add Honeycomb bridge domain management testsselias1-0/+202
JIRA: CSIT-41, CSIT-42, CSIT-43 - add test cases for Honecomb bridge domain management - add keywords used by these tests - prefix the names of Honeycomb test suites with numbers, so that they execute in a specific order - moved suite teardown with "Stop Honeycomb service" to bridge domain suite Note: Due to time constraints, the Honeycomb service cannot be restarted between executions of individual Honeycomb test suites. Therefore Honeycomb will be setup in the first test suite and shut down after the last one. Change-Id: I36b7f8335e5ba54985da5bd83730cf856d5ab48b Signed-off-by: selias <samelias@cisco.com>
2016-05-09QEMU VM guest-ping fixMatus Fabian1-1/+4
JIRA: CSIT-62 Change-Id: I0affda16af8f983895c50fbc306f45f30fbb69cd Signed-off-by: Matus Fabian <matfabia@cisco.com>
2016-05-09Interface VxLAN testTibor Frank2-0/+91
JIRA: CSIT-45 - add test: Honeycomb modifies interface configuration - VxLAN - add keywords used in these tests to set and verify configuration - add method and vat template for dumping an interface's configured VxLAN - fixed requirements.txt Change-Id: I6d6c360a4d478a0e40eecf7c0235969e7c06f7a9 Signed-off-by: Tibor Frank <tifrank@cisco.com> Signed-off-by: C.J. Collier <cjcollier@linuxfoundation.org>
2016-05-06Add Honeycomb interface management tests (ipv4, ipv6, ethernet, routing)selias4-33/+331
- add test cases for managing ipv4, ipv6, ethernet and routing configuration on VPP interface - add keywords used in these tests to set and verify configuration - add method and vat template for dumping an interface's configured IP addresses - add method for converting between ipv4 netmasks and network prefixes - clean up documentation of older Honeycomb keywords Note: Test cases are tagged with a placeholder tag to allow manual test runs locally. It should be replaced with the appropriate environment tags once Honeycomb service is deployed on virl. Change-Id: I99ce1e72c8550f520f8c35ef4a93eaebb530db78 Signed-off-by: selias <samelias@cisco.com> Signed-off-by: Matej Klotton <mklotton@cisco.com>
2016-05-06Honeycomb API keywords - interface, bridge domainTibor Frank5-673/+1186
- add keywords to manipulate data using Honeycomb REST API to configure interfaces and bridge domains - remove "add_vpp_to_honeycomb_network_topology" method from HoneycombSetup.py - remove "parse_json_response" from HoneycombUtil.py - add methods to manipulate data from Honeycomb REST API Change-Id: I5e6f87097fe9bfccffa3d4aae21f63281353cf29 Signed-off-by: Tibor Frank <tifrank@cisco.com>
2016-05-06Add "show error" output into vpp statsPeter Mikus2-0/+11
- Add "show error" debug output into VPP show stats as verbose subcommand is not parsed correctly in output of vpp_api_test Change-Id: I924c54bb86375e43770fd449b8d6aaa7a3413bcb Signed-off-by: Peter Mikus <pmikus@cisco.com>
2016-05-04Update T-rex version to v2.00pmikus1-9/+13
- JIRA: CSIT-14 - Update T-rex version to v2.00 with latest API - Compatibility fixes of affected libraries and robot files - T-rex performance tuning Change-Id: I3a90553032d6d82e6e03df7e0b52e205d3f6ba4e Signed-off-by: pmikus <pmikus@cisco.com>
2016-05-03Patch to reset default VPP configuration in perf.pmikus1-1/+5
- JIRA: CSIT-57 - fix situation when vpp startup configuration is replaced by default with no interface configuration Change-Id: Iea23dcc0707bc96627b99d4500268a8e01bfda39 Signed-off-by: pmikus <pmikus@cisco.com>
2016-05-02Add vpp_create_loopbackMatus Fabian1-0/+16
Change-Id: If934d7ec28f86b070a0cafa0ee56d0bcf4e2ac6d Signed-off-by: Matus Fabian <matfabia@cisco.com>
2016-04-26Add qinq through xconnect tests.Patrik Hrnciar3-0/+209
Change-Id: Ia20f5959dab41290bf60490ead830f0e37ecff0d Signed-off-by: Patrik Hrnciar <phrnciar@cisco.com>
2016-04-26Add BD vpp-vm-vpp testsMatus Fabian1-0/+54
JIRA: CSIT-20 Change-Id: Id22102519cdc8afef63c0e727fb47e2a2f1d769b Signed-off-by: Matus Fabian <matfabia@cisco.com>
2016-04-26Extend host topology with NIC type filteringMiroslav Miklus4-8/+94
JIRA: CSIT-1 Changes to allow filtering based on NIC model. Switched xconnect perf test to use filtered topology. Change-Id: Id526f47dc28f92bf26d070e54819ad29bccc0440 Signed-off-by: Miroslav Miklus <mmiklus@cisco.com>
2016-04-26Honeycomb interface state management testselias4-58/+125
- add simple test for interface management through Honeycomb API - add status code 500 to honeycomb startup check whitelist, due to Honeycomb changes in https://gerrit.fd.io/r/772 - increase timeout value for Honeycomb startup check - modify Honeycomb setup keywords to allow starting Honeycomb on individual nodes - remove sanity test suite, tests now sorted by functional areas such as interfaces, bridge domains, VXlan,... Change-Id: I87f9cf69577706f3b00e24a8d2c01df52fc707c6 Signed-off-by: selias <samuel.elias@pantheon.tech>
2016-04-26Add optional args to traffic script arg parserMatus Fabian1-2/+10
Change-Id: I92e890e0c42da34e1e72a442f7a3bbe12fe9aef1 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2016-04-26Add IPsec utilities python libraryMatus Fabian1-0/+362
JIRA: CSIT-28 Change-Id: I9513f14a9920bfbdaf34c5cc5d4619d16a383ca2 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2016-04-25Honeycomb API keywordsTibor Frank2-26/+618
- add keywords to get, put post and delete configuration data using Honeycomb REST API - add keywords to get operational data using Honeycomb REST API Change-Id: If75221777e0e83a809c834addf82e95bbd540e21 Signed-off-by: Tibor Frank <tifrank@cisco.com>
2016-04-22Reformat python libraries.Matej Klotton32-664/+700
PEP8 reformat fix typos docstrings reformat Change-Id: Ic48ba4e06490630808b8e2ab1ab0b046ec7eeed7 Signed-off-by: Matej Klotton <mklotton@cisco.com>
2016-04-22Bridge domain tests and user keywords refactor.Jan Gelety2-10/+170
- BD tests changed to behavior-driven-test style - added documentation to BD tests - added documentation and examples to BD user KWs Change-Id: Ifad45df3ef0bb55f5295363a264fe5f4e54f5762 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2016-04-22VatExecutor updateMatus Fabian2-0/+38
Strip non-JSON data from VAT terminal output Add method for VAT command retval verification Change-Id: Ibe68020393cb1a700ad048dc78078f71064707b4 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2016-04-20Remove horizontal whitespace (a line) before [Command_start_exec] tag.mkonstan1-1/+0
Change-Id: I51e5616cb45b3c67e82153cc4c0f42ec9c5d75d7 Signed-off-by: mackonstan <mkonstan@cisco.com>
2016-04-19Make dut_setup.sh verbose; add sleep after vpp restart.Stefan Kobza1-40/+31
- there's a race condition between VPP service restart and vpp_api_test execution; this patch addresses it with (for now) sleep after service vpp restart - above is just a workaround until VPP provides us with a notification of readiness.. Change-Id: I1f92c1d86e4f90c9432ea57c1747629f619f003e Signed-off-by: Stefan Kobza <skobza@cisco.com>
2016-04-17Multicore VPP setup for performance testingpmikus2-3/+98
- add multithread TAGS documentation - add methods to VppConfigGenerator for RSS configuration - create KW for multithread setup - create sample test case using multithread vpp setup - add Documentation into TCs Change-Id: Id40862490d49380dc76d1d3ce39314603f983fd3 Signed-off-by: pmikus <pmikus@cisco.com>