Age | Commit message (Collapse) | Author | Files | Lines |
|
- add netconf test for specific issue HC2VPP-60
Change-Id: I8fc64bce40f1e43d93e7e92c952e564151bc8232
Signed-off-by: selias <samelias@cisco.com>
|
|
Change-Id: Ic95fbe288495ee4cd75178d74c220f6af5d2b11a
Signed-off-by: Jan Gelety <jgelety@cisco.com>
|
|
Change-Id: I2e76de710b4b758eac1d24d447a9c5938f937385
Signed-off-by: Tibor Frank <tifrank@cisco.com>
|
|
Change-Id: I4a348c696e4cacbf5aa0723f2b8070bbcce7666c
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
- improve packet trace logging after each test
- suppress IPv6RA on VPP because it interfered with ipv6 test cases
- do not use fictional destination MAC address, doesn't work in VIRL
- ignore errors when logging configuration - should not fail the test
Change-Id: I16a3321670d4c2fa8f6434dc4badd243b7e4f9fc
Signed-off-by: selias <samelias@cisco.com>
|
|
- modify keywords in CpuUtils.py
- add RF keywords
Change-Id: I57230b3948254e8f149b2563a8e24e948bc2ec27
Signed-off-by: Tibor Frank <tifrank@cisco.com>
|
|
- Create test cases to test Dot1Q+L2BD+vhost_user IPv4 and IPv6
scenarios
Change-Id: I0823e2d22a36fce236c037cfda27d588ebcd1cc5
Signed-off-by: Matej Klotton <mklotton@cisco.com>
|
|
- fix and update ipv4 and ipv6 tests
- add tests for ipv6 neighbor and vrf-id
- add tests for secondary IP address on ipv4, ipv6
Change-Id: I1e422e61108493a63a65ad91f649e69dfff0842f
Signed-off-by: selias <samelias@cisco.com>
|
|
Using pypcap's L2listen instead of standard AF_PACKET scapy can
see received Dot1Q tag.
Change-Id: Icb3dcb272a9611158a26a83fede7550bba3f367e
Signed-off-by: Matej Klotton <mklotton@cisco.com>
|
|
- replace nc to socat for comunicating with qemu QGA
- change disk type to use virtio driver
- add check to bind only network interface for testpmd
Change-Id: I19ab16cbd8fec1ec78263ccfb1309a144e5af845
Signed-off-by: Matej Klotton <mklotton@cisco.com>
|
|
Change-Id: I6a2fc503989576f806413ae98845e3e3676889b8
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I9fc3a74bf6356bdccee16c977df86567e91b4acf
Signed-off-by: Jan Gelety <jgelety@cisco.com>
|
|
Change-Id: I864f97b4559fc1d692bfba80266150a3d06dd6bb
Signed-off-by: Matej Klotton <mklotton@cisco.com>
|
|
Change-Id: Id13c7fd51e693a273637c80cb35a159434be4826
Signed-off-by: Tibor Frank <tifrank@cisco.com>
|
|
- update low level ACL based on yang model changes
- remove ietf-ACL test suite and test data and keywords
- add ACL-plugin test suite, test data and keywords
The ietf model of ACLs is no longer supported in Honeycomb. It has
been replaced by the ACL plugin.
Change-Id: Ic2c2a3e11c9717d1d3885275f6b868a0098343f9
Signed-off-by: selias <samelias@cisco.com>
|
|
- add protocol value to expected VAT data
- add protocol value to snat_static_mapping_dump parser
- add temp workaround for returned "error:misc" on Ubuntu14.04
Change-Id: I42776b62b04eac65d03dcae1ec6a386a765b2e52
Signed-off-by: selias <samelias@cisco.com>
|
|
Some VAT commands return "error:misc" in addition to their normal
JSON output. This causes the JSON parser to complain about extra data.
Change-Id: I0da9739f371998dd6e2e6d6f70c1e8a3d82b6350
Signed-off-by: selias <samelias@cisco.com>
|
|
- print list of VAT commands executed per DUT node during the test
case in the func test teardown
Change-Id: I18a750ebfb7560eff9f5c4f0826ef84c3f64b4a8
Signed-off-by: Jan Gelety <jgelety@cisco.com>
|
|
Change-Id: I982834de1fbe71cf5303808ea58d4b58e530ffcb
Signed-off-by: Tibor Frank <tifrank@cisco.com>
|
|
Change-Id: I8b918a3c1d8109fb64bfdeec8e5c9afe45a86d21
Signed-off-by: pmikus <pmikus@cisco.com>
|
|
Change-Id: Iff42549e3be610c88b7a7d5518ef2cbb88c75ed2
Signed-off-by: Tibor Frank <tifrank@cisco.com>
|
|
Change-Id: Ib5a1e207f1dec99747329a755c3c365fef4bd64c
Signed-off-by: Tibor Frank <tifrank@cisco.com>
|
|
- original commit at https://gerrit.fd.io/r/4683
Change-Id: I0b2d77f66830fbbc2d27e9015ec67ea9cd9a9885
Signed-off-by: selias <samelias@cisco.com>
|
|
- remove EXPECTED_FAILING tag from IPv4 neighbor, IPv6 address, MTU
- fix bridge domain removal with interfaces assigned, it should fail
- fix teardown of L2 FIB suite (bridge domain removal, see above)
- disable vhost-user "server" test cases (VPP bug)
- fix keyword verifying sub-interface state
- update ACL test data (yang model changes)
- remove EXPECTED_FAILING tag from ACL table removal test
- update Jira IDs and comments in failing Lisp test case
- remove EXPECTED_FAILING tag from Lisp removal test case
- use vhost-user "client" instead of "server" in persistence tests
Change-Id: I32eafb6013b4512090c0d9365e10c61029179d49
Signed-off-by: selias <samelias@cisco.com>
|
|
- add workaround for mismatched jvpp versions in deb packages
- disable NSH_SFC madule and test suite, it depends on outdated jvpp
- cleanup package download script used in hc2vpp-csit-verify job
Change-Id: I98526baa4de08bbbab2339c9e81f49cd189b57ac
Signed-off-by: selias <samelias@cisco.com>
|
|
Fix the string in PDR latency output
Change-Id: I7f244e29015da4e71485e88f2988efa73b6f4853
Signed-off-by: pmikus <pmikus@cisco.com>
|
|
- 10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc
- 40ge2p1xl710-eth-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc
Change-Id: I99a70c8fcdfc0fffda96606033ba8752d6c07952
Signed-off-by: Tibor Frank <tifrank@cisco.com>
|
|
Change-Id: I65e716b51dd35092c10574ac4580ee4b8bd3b24b
Signed-off-by: Tibor Frank <tifrank@cisco.com>
|
|
Add same latency formatting for PDR as for NDR search results.
This will help us to parse the data in same way.
Change-Id: I3be79cc7623f8c9d39fd44babd252ceec58c114b
Signed-off-by: pmikus <pmikus@cisco.com>
|
|
Change-Id: Ic16f91beabdc2ac2e19ccc65c04790d36c15d477
Signed-off-by: Matej Klotton <mklotton@cisco.com>
|
|
- Create test cases to test VXLAN+L2BD+vhost_user IPv4 and IPv6
scenarios
Change-Id: I46d27f22ec2e2e35fd5067ba7eeda9a2ccff9f84
Signed-off-by: Jan Gelety <jgelety@cisco.com>
|
|
Change-Id: I996847a4871ed994cd9b5edb459fb079ff39c86d
Signed-off-by: Fangyin Hu <fangyinx.hu@intel.com>
|
|
- add NAT test suite
- add keywords and methods for configuring and reading NAT settings
- add test data used in NAT suite
Change-Id: Iaa2ac1eb156bc9bcff41ec242318f6a973210d38
Signed-off-by: selias <samelias@cisco.com>
|
|
Change-Id: Iad743b3c0e2d1b57e7c6bcae521fe958fbb06ced
Signed-off-by: selias <samelias@cisco.com>
|
|
- Packet throughput L2BD test cases with VXLANoIPv4 and vhost
Change-Id: I6373ef232e5ce7155f8dec80ffa576a6a6b69b81
Signed-off-by: Tibor Frank <tifrank@cisco.com>
|
|
- Add performance tests for packet throughput L2BD with VXLANoIPv4
Change-Id: Id0872e1847f5a0e0eb37ba352bf75f56c51c7a45
Signed-off-by: Tibor Frank <tifrank@cisco.com>
|
|
There is an issue that booting Nested VM is successful but
QGA guest-ping or flush returns partial response. This fix suppose
to do checking until an error or timeout occurs. In case of QGA
returns correct response it is success. In case of partial
response it will log an error and continue in checking.
Change-Id: Idb2c5e5ea54bfc1e118ff62dd15696a1797dfdd9
Signed-off-by: pmikus <pmikus@cisco.com>
|
|
- fix Map.py
Change-Id: I0241e655df12f8135884e48d14c8eea43c501323
Signed-off-by: pmikus <pmikus@cisco.com>
|
|
- add Lisp test suite
- add Lisp test data
- add keywords and methods used in Lisp tests
Change-Id: Ie7819e20cf48e7dac106d60cce316ce69ab75786
Signed-off-by: selias <samelias@cisco.com>
|
|
When comparing multi-level JSON trees, the exceptions raised
carry more useful information.
Keys and values not present in reference data are ignored.
No longer puts chunks of honeycomb's log file into robot report. The
entire log file will be archived after https://gerrit.fd.io/r/4171
Change-Id: Ib597080fa3d9b2c43463c76ee0d52f317ea072e7
Signed-off-by: selias <samelias@cisco.com>
|
|
- Fix PyLint errors
- Fix comments in touched python modules
Change-Id: I26db2d292a41969cf38b9b0bdd49c4fb15349102
Signed-off-by: Tibor Frank <tifrank@cisco.com>
|
|
Change-Id: I392eac7404d5e1793a7de9d7a44b9defb89e7b9d
Signed-off-by: selias <samelias@cisco.com>
|
|
There is an issue that booting Nested VM is successful but
QGA guest-ping returns partial response. This fix suppose to
do checking until an error or timeout occurs. In case of QGA
returns correct response it is success. In case of partial
response it will log an error and continue in checking.
Change-Id: I8a2469287abaa9398a9206988e579912840f20c4
Signed-off-by: pmikus <pmikus@cisco.com>
|
|
Currently we were using 3t3pc for Qemu (2t2pc testpmd). This is
not enough anymore as we are testing VPP with 4t4pc. This patch
is supposed to increase the number of core used by testpmd.
Change-Id: Id58634c050b51943679a1f7cb74c624a98d81a27
Signed-off-by: pmikus <pmikus@cisco.com>
|
|
Add option to configure CFS scheduler priority for VPP
Change-Id: Id358ebe41d7e868fd412d554d886567f81894b86
Signed-off-by: pmikus <pmikus@cisco.com>
|
|
- add package download script that also installs jvpp .jar
to maven local repo
- add bootstrap scripts for the new jobs
Related ci-management commit: https://gerrit.fd.io/r/4171
Change-Id: I11ec3d93d3b6f6d84c0c1c5e54f166dab96a05ee
Signed-off-by: selias <samelias@cisco.com>
|
|
Add multi-queue support when starting qemu. Full implementation
will be following in near future.
Change-Id: I743bbde67254b26a4e4e98072bad57dde728845a
Signed-off-by: pmikus <pmikus@cisco.com>
|
|
Reading information from sysfs or proc files is randomly failing
returning empty string without any error.
This fix suppose to add the retries to read the hugepages
information multiple times and raise exception if reading failed.
Change-Id: I7c88504765c39b11c81f7a8e77e5b0e32b7225fe
Signed-off-by: pmikus <pmikus@cisco.com>
|
|
- add port mirroring test suite
- add relevant keywords
Change-Id: I4ff398dd2ab4323e2a53af2812bf07cbb7043252
Signed-off-by: selias <samelias@cisco.com>
|
|
- outdated due to HC project change - split to honeycomb and hc2vpp
Change-Id: If9e3c9baf7787067eff6a759be1ad9aa386c6e0f
Signed-off-by: selias <samelias@cisco.com>
|