aboutsummaryrefslogtreecommitdiffstats
path: root/resources/libraries
AgeCommit message (Collapse)AuthorFilesLines
2018-09-07CSIT-1271: Add VTS tests to MRR jobsTibor Frank1-0/+3
Change-Id: I5c0be60a1819c5c46225b4468ba9c88068231f08 Signed-off-by: Tibor Frank <tifrank@cisco.com>
2018-09-07Create ip6scale tests for 2-node topologyJan Gelety1-19/+37
Jira: CSIT-1176 Change-Id: I78f4e9cb24a7de0bde24a78d1ca26607598a62b2 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2018-09-06CSIT-1264: Add oper branch wrapper entry scriptVratko Polak3-1/+133
Change-Id: I569b089b711f89fecca8dd31d6906ef311982877 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2018-09-06fix CSIT broken issue when numa_node value is -1 on single Socket platformYulong Pei1-2/+5
Single Socket platform e.g. Intel Atom cpu based SOC platform with Ubuntu 16.04.4(kernel 4.13.0-36-generic) or Centos 7.5 (kernel 3.10.0-862.el7), value of /sys/bus/pci/devices/<pci_device_id>/numa_node is -1, this will break CSIT performance test running, but for this kind of SOC platform, it can consider that is not NUMA based platform, numa_node=-1 is reasonable, so fix it at CSIT side, when numa_node=1 and the system's NUMA node count is 1, set numa_node=0. DPDK also did it as this way. Change-Id: I9ac23d3cece2f1489e38f05b50a462bb2ad9f661 Signed-off-by: Yulong Pei <yulong.pei@intel.com>
2018-09-05Create ip4scale tests for 2-node topologyJan Gelety1-13/+31
Jira: CSIT-1174 Change-Id: I46944a3bc0f508d80c8c944dab0190925ebe21f5 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2018-09-05CSIT-1205 Create AVF driver testPeter Mikus8-132/+545
- Add L1 KWs for SR-IOV handling (init Vfs, remove Vfs, ...) - Cleanup L1 KWs for SR-IOV bind/unbind/pci_get/... - Add L2 KWs for Test Setup/Teardown, L2patch, Create AVF interface - Add sample L2patch test fox x710, xxv710 Change-Id: If17077877455a14043617d8ea0d06cbe47b469e3 Signed-off-by: Peter Mikus <pmikus@cisco.com>
2018-09-05Fix various pylint violationsVratko Polak19-106/+111
+ SchedUtils.py: Do not use `len(SEQUENCE)` to determine if a sequence is empty + VatHistory.py: Do not use `len(SEQUENCE)` to determine if a sequence is empty + VppCounters.py: Do not use `len(SEQUENCE)` to determine if a sequence is empty + Memif.py: ++ Do not use `len(SEQUENCE)` to determine if a sequence is empty ++ Either all return statements in a function should return an expression, or none of them should. ++ Update :return: on possible None. + Classify.py: Unnecessary "else" after "return" + ContainerUtils.py: Useless super delegation in method '__init__' + CpuUtils.py: Do not use `len(SEQUENCE)` to determine if a sequence is empty + DropRateSearch.py: Either all return statements in a function should return an expression, or none of them should. + IPv4NodeAddress.py: Do not use `len(SEQUENCE)` to determine if a sequence is empty ++ Also improve docstrings. + IPv4Setup.py: Useless super delegation in method '__init__' + IPv6Setup.py: Do not use `len(SEQUENCE)` to determine if a sequence is empty ++ Also improve docstrings. + IPv6Setup.py: standard import "from ipaddress import IPv6Network" should be placed before "from robot.api import logger" + MacSwap.py: Trailing newlines + NATUtil.py: Do not use `len(SEQUENCE)` to determine if a sequence is empty + NodePath.py: Unnecessary "else" after "return" + Tap.py: Do not use `len(SEQUENCE)` to determine if a sequence is empty + topology.py: Either all return statements in a function should return an expression, or none of them should. + topology.py: Unnecessary "else" after "return" ++ Do not use `len(SEQUENCE)` to determine if a sequence is empty ++ Improve docstrings + DUTSetup.py: Do not use `len(SEQUENCE)` to determine if a sequence is empty ++ Also do not compare int(ret_code) just to access zero-ness. + ssh.py: Do not use `len(SEQUENCE)` to determine if a sequence is empty + InterfaceUtil.py: Unnecessary "else" after "return" Change-Id: Iba4244aa79661ee7df15fed5c7c6dbf04dfa88b2 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2018-09-05Add eth-ip4base-2memif[ndrpdr|mrr] perf tests for 2-node topologyJan Gelety2-0/+143
- added also 3-node test cases for comparison Jira: CSIT-1261 Change-Id: I1bfcc184e925e969d4a610920c4e49af23047507 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2018-09-04Fix pylint part 1Peter Mikus9-19/+57
- Decrease pylint errors. Part: easy Change-Id: I452e5b5a11e9b78c03cd173a3848babe21b93c73 Signed-off-by: Peter Mikus <pmikus@cisco.com>
2018-08-30CSIT-1135: Scripts for VPP per-patch testingVratko Polak7-0/+1309
+ Scripts do not rely on (other) bootstraps. + Perf verify bootstrap is also the new style sript now. + Scripts are divided to functions for better re-use. + Functions are sourced from small number of large "library" files. - Still using jumpavg from pipy. - Perpatch has specific simplified parsing (instead of the PAL one). - Bash style document is in a separate Change. Change-Id: If88fa528ce155ea86b614e3d77c0550b91bbdf11 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2018-08-28Create ip4-feature perf tests for 2-node topologyJan Gelety1-68/+130
- ACL tests - NAT44 tests - iPoliceMarker tests Jira: CSIT-1175, CSIT-1154 Change-Id: Ife7e7df50f7c1c8033bacdb7512e78be6bcdf4eb Signed-off-by: Jan Gelety <jgelety@cisco.com>
2018-08-24add the expected prompt for ubuntu root userYulong Pei2-3/+3
if ssh use root account to login ubuntu os, its prompt is ":~# ", so add it to let csit test can run with root account. Change-Id: I21f5380245324c8e48099433e3d374188e9001d9 Signed-off-by: Yulong Pei <yulong.pei@intel.com>
2018-08-24VPP link bonding perf tests with two links between DUTsJan Gelety3-31/+251
Jira: CSIT-1247 Change-Id: Ia6a3f7682eb9a35040682913c0e33a1d61d1e6fa Signed-off-by: Jan Gelety <jgelety@cisco.com>
2018-08-22CSIT-1164 Create VM vhost tests for 2-node topologyPeter Mikus1-1/+1
Change-Id: I955d3170da94cf35a2fda03259bcdc020ac2b652 Signed-off-by: Peter Mikus <pmikus@cisco.com>
2018-08-22CSIT-1222: Do two doublings in external MLRsearchVratko Polak7-22/+74
Make number of doublings configurable, keep Python default at 1, set Robot default to 2. Also make docstring types unique (pylint was complaining about classes and modules having the same name). Increase MLRsearch version to 0.2.0. Change-Id: Ib846032e79ff52994503c0cfef2f86655502c275 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2018-08-20Refactor VHOST codePeter Mikus8-869/+792
CSIT-1164 Create VM vhost tests for 2-node topology CSIT-1173 Implement VM vhost KWs for 2-node topology - Cleanup QemuUtils.py Library (PEP8, some TODOs, readability, multi queue, ring size, qemu version detection) - Cleanup VHOST KWs perf (Unify running QEMU on N-node topology) - Add ability to configure Queues, Hyperthreading, automatically compute number of CPU for VM/Testpmd and RXQ for Testpmd workload. - Partial cleanup of configuration KWs (l2xc, l2bd) for 2-node - Create IPv4 2-node KW Change-Id: I8aae1355bafa651de715cd438fe706c443ea1d88 Signed-off-by: Peter Mikus <pmikus@cisco.com>
2018-08-10CSIT-1156 Create container memif tests for 2-node topologyPeter Mikus3-98/+120
CSIT-1155 Implement container memif KWs for 2-node topology Change-Id: I4fc7bcab499a0b8a8594114d3f331b0d9610bf9d Signed-off-by: Peter Mikus <pmikus@cisco.com>
2018-08-10CSIT-1193 De-duplicate bootstrap scripts into onePeter Mikus2-4/+7
- DPDK and VPP bootstrap merged into one (ligato will follow). - Added more error detections - Added topo-cleanup.py to cleanup TB before and after test. - Remove installation of VPP Change-Id: I7a86117eb03cbe4ee8fde47baeed58bc86c0dfb2 Signed-off-by: Peter Mikus <pmikus@cisco.com>
2018-08-03Add unix full-coredump to VPP default configVratko Polak1-0/+1
Change-Id: Iceea1f25749443d3cf091996026f75d8779e8103 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2018-08-01FIX: check IF up state after setting MTU, not beforeJan Gelety1-1/+1
Change-Id: Ic7a78af96a371e49993f6cbac01267e4bbe0dc46 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2018-08-01FIX: Set MTU before configuring l2patchVratko Polak1-2/+2
This should reduce number of "link down" failures dramatically. The exact mechanism is not clear, but l2xc suites do not fail that much. Change-Id: Ie102d90a58561121695c9938679ce0d3ee6a874f Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2018-07-31FIX: Revert l3fwd patchingPeter Mikus1-1/+0
For now this solution does not work on Haswells, need to find permanent fix. Change-Id: Id5323a078db3a8f14c009d6f66ee393c89d851ef Signed-off-by: Peter Mikus <pmikus@cisco.com> (cherry picked from commit 5f634b8c486f7a404c9cd33b60cc92a6907e7c64)
2018-07-28FIX: LXC container creation on Ubuntu BionicPeter Mikus1-1/+2
Do not mount whole /dev into container as it can steal the PTS (tty). Currently mounting only /dev/bus for pci devices and /dev/vfio Change-Id: Ie829d35db81317bcd081257453ede7cbec2a302e Signed-off-by: Peter Mikus <pmikus@cisco.com>
2018-07-28Revert MTU sequence to apply oafter interface UPPeter Mikus1-2/+4
Change-Id: I8820350809ab63787a9e4a48b2db2c85320e7b11 Signed-off-by: Peter Mikus <pmikus@cisco.com>
2018-07-27FIX: Interface up handlingPeter Mikus5-16/+24
- Increase timeout when trying to check interface (this is useful if there are multiple interfaces and dump command take more than TIMEOUT/NR_IF which is happening quite often). - Reverse the order of applying MTU and interface UP to try to prevent API overload during interface initialization phase. Change-Id: I4e8623963d15b3c0d202172b4c58c43a972bb9cb Signed-off-by: Peter Mikus <pmikus@cisco.com> (cherry picked from commit 584345da4f7330f7517e5defd894b4995c2b57b0)
2018-07-26CSIT-1065 High failure rate with K8s/Ligato orchestrationPeter Mikus3-13/+92
- Update Ligato Bootstrap for latest changes - Update Ligato Test cases for latest vpp-agent changes - Convert TC to new format - Add Hyperthreading support Change-Id: Id7c8513b01c66ee6c652b6294ddc50bc10be8f7d Signed-off-by: Peter Mikus <pmikus@cisco.com>
2018-07-25Add MTU handling into perf testsPeter Mikus3-94/+122
- Add ability to configure MTU on interfaces. Put the MTU into configuration keywors for all perf testcases. Change-Id: I364b4bc26b26f2f66f350949c0aaa2a2aa675682 Signed-off-by: Peter Mikus <pmikus@cisco.com>
2018-07-24CSIT-1097: Migrate L2 to NDRPDR and edit MRRVratko Polak3-11/+27
Change-Id: I738d1794f795e1225bc9709ea2ed2cf9b06d1cf4 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2018-07-24initial CSIT-DMM test scriptssharath reddy5-0/+404
Change-Id: I77a965751010b85d21335932baa5345a095dc4f3 Signed-off-by: sharath reddy <sharathkumarboyanapally@gmail.com> Signed-off-by: sharath <sharathkumarboyanapally@gmail.com>
2018-07-24CSIT-1097: Migrate Vts suite to NDRPDRVratko Polak4-4/+88
Change-Id: Iaac913bb4b15d743a2e9d565e25d31c089cee3e8 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2018-07-24CSIT-1097: Migrate ip4 to NDRPDR and edit MRRVratko Polak2-4/+33
Change-Id: I9e3b2973c14f818247658a2ae34456c9fc2bae4e Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2018-07-24CSIT-1097: Edit dpdk suites for new rate and jumboVratko Polak1-2/+5
Change-Id: If2fceb47639dc1add32184271c1e911f7920a51a Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2018-07-24CSIT-1097: Migrate vm_vhost to NDRPDR and edit MRRVratko Polak1-0/+4
Change-Id: Id5eb8fe46b219426803d3e7d135319ce5117738c Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2018-07-19FIX: Increase timeout for VAT for longer API calls.Peter Mikus1-1/+1
Change-Id: Idab5e8d62a42513ddef97025625962b510c3a625 Signed-off-by: Peter Mikus <pmikus@cisco.com>
2018-07-18CSIT-1097: Ip6 NDRPDR and edited MRR suitesVratko Polak1-1/+8
Change-Id: I912017c6d1eab5530eecb2326887ffd057916ee8 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2018-07-18CSIT-1201 Create L2patch perf testsPeter Mikus3-0/+65
- XL710, XXV710, X710 - 2n, 3n - all pkt.size groups - ndrpdr, mrr Change-Id: Ibb36d734cd70a0a4d07e3d177fa2477bf9bfaacd Signed-off-by: Peter Mikus <pmikus@cisco.com>
2018-07-17CSIT-1186: Add srv6 NDRPDR suitesVratko Polak7-19/+360
Delete the corresponding ndrpdrdisc suites. MRR suites are also edited, to make them less different from NDRPDR suites. Now, there is a script to re-generate testcases of selected suites. For that, resources/libraries/python/autogen is created, with Regenerator holding the most of script logic. The script looks at files matching a glob expression, reuses a "prolog", but overwites test cases with the default template and hardcoded set of testcase arguments. Also, handling of overhead size has been simplified, using new keyword Get Max Rate And Jumbo And Handle Multi Seg. Default value for search timeout is increased to 12 minutes to make timeout failures less frequent. Change-Id: I394ad61f262b3078e5ca719034b15ada48987ee0 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2018-07-17Refactor DPDK testcases to new structurePeter Mikus3-21/+79
+ RXQ refactor Change-Id: Ic03a2e208b9fe5d324a5ed75a603af4cff1854a9 Signed-off-by: Peter Mikus <pmikus@cisco.com>
2018-07-16Add L2xc/L2bd/Ip4/Ip6 2-node tests for x710Peter Mikus3-3/+33
- CSIT-1161 Add 2-node L2XC tests - CSIT-1160 Add 2-node L2BD tests - CSIT-1157 Add 2-node IP4 tests - CSIT-1153 Add 2-node IP6 KW - CSIT-1158 Add 2-node IP6 tests Change-Id: I7c8fed7018bb355c0de73f6a8bc3a8ec80366972 Signed-off-by: Peter Mikus <pmikus@cisco.com>
2018-07-13Refactor perf test casesPeter Mikus2-38/+69
- Refactor Performance TCs due to changes in Hyperthreading and RXQ allocations. - Simplify the structure of suite to avoid large refactors in future. Change-Id: Ifb1b9719391f26745f075a900bd9fb39b6cb809c Signed-off-by: Peter Mikus <pmikus@cisco.com>
2018-07-13Add stats segment heapsize to default configPeter Mikus2-0/+10
- Scale tests (ip4, ip6) are failing due to low amount of stats segment heapsize. Change-Id: Id9b3e84d5a5c63014c17041c08c00ef6188afa5f Signed-off-by: Peter Mikus <pmikus@cisco.com>
2018-07-12CSIT-1186: Consume MLRsearch in agreed upon wayVratko Polak8-3/+3
+ Rename search to MLRsearch in resources/libraries/python/. + Make PyPI/MLRsearch/MLRsearch a symlink to the renamed directory. + TrafficGenerator.py to import from the renamed directory/module. - No change to MLRsearch code. - Version stays at 0.1.1 to point to the latest released code. Change-Id: I4a38b0b7f8f083fbb1a93b25522560144b4ef556 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2018-07-11CSIT-1178: Prepare for bursty MRRVratko Polak2-42/+87
+ All suites and tests still refer to MRR instead of BMRR (or FRMOBL). + API change: Traffic should pass with maximum rate first argument got a default value, thus it needs to be moved towards the end of argument list. + Consequently, the value for it has been deleted from suites. + Test message is now compatible only with BMRR parsing. - Reporting of transmit rate is left as TODO. + Global test __init__ with new way of giving defaults to global variables. + The new keyword is put into robot_enhancements.robot resource. + Number of trials and trial duration are now configurable. - Bootstrap scripts have no support for overriding the defaults yet. Change-Id: I4b108cc9c256730e62c03fbacba0a1c314f8ae88 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2018-07-10CSIT-1142 2-node topology - keywords DPDKPeter Mikus1-82/+50
Change-Id: Ia2676a7b846bd574aa86703fce6b0e3218f98776 Signed-off-by: Peter Mikus <pmikus@cisco.com>
2018-07-09CSIT-1142 2-node topology - keywordsPeter Mikus4-141/+114
- Clean up of 2-node setup KWs Change-Id: I59fc901fb57544eceb6a041b56b515cda8babf85 Signed-off-by: Peter Mikus <pmikus@cisco.com>
2018-07-03VTS VXLAN vhost-user with single DUT, TG sends VXLANPeter Ginchev2-0/+94
Change-Id: I63539af2cdbdbd02a67068e48d0fdf2743da3b1e Signed-off-by: Peter Ginchev <pginchev@cisco.com>
2018-07-03CSIT-1046 Make uio driver configurable from topofilesPeter Mikus3-17/+34
Currently we are configuring uio_driver from global variable. This may not be suitable for various topologies where we need different driver per TB. This patch is suppose to put uio_driver into topology files. Change-Id: I56af0697e8b2359ccb126151217976408720c1ba Signed-off-by: Peter Mikus <pmikus@cisco.com>
2018-07-02Compatibility fixes with Ubuntu 18.04Peter Mikus3-10/+26
Currently we are using ip:port socket to for VPP to listen for incoming connections. There is only one place in code this socket is used for detection if VPP is responding after restart. This patch is supposed to change ip:port to sock:file which is default preffered way in VPP. This way we can start using vppctl. netcat on the other side with ip:port remains hanged in console for infinite time not returning back. There is also need to check whether uio_module is loaded and eventually load it. As uio_pci_generic is not working there, we will fallback to main igb_uio (uio_pci_generic being only lightweight subset of igb_uio). This patch also add additional verbose output to console during setup to better understand if failure happens during copy/extract/setup. Change-Id: I0b8a3b76dce3316496a3ad928f58718b6e73057d Signed-off-by: Peter Mikus <pmikus@cisco.com>
2018-06-29HC Tests: use vpp-fib-management module in dhcp tests (HC2VPP-348)Marek Gradzki1-1/+1
Addaps HC DHCP tests to https://gerrit.fd.io/r/#/c/13299/ Change-Id: I874da5ee76fcfdb5039c1b3ad33aec4af80396d0 Signed-off-by: Marek Gradzki <mgradzki@cisco.com>
2018-06-29SetupFramework to detect failures, part IIPeter Mikus1-10/+4
- This patch is enforcing evaluation and aligning all __init__.robot files to use the same logic. Change-Id: I9e2bf5e904bb6d22f4e6a153c951c3b3c233e2fb Signed-off-by: Peter Mikus <pmikus@cisco.com>