aboutsummaryrefslogtreecommitdiffstats
path: root/resources/libraries
AgeCommit message (Collapse)AuthorFilesLines
2018-07-03CSIT-1046 Make uio driver configurable from topofilesPeter Mikus3-17/+34
Currently we are configuring uio_driver from global variable. This may not be suitable for various topologies where we need different driver per TB. This patch is suppose to put uio_driver into topology files. Change-Id: I56af0697e8b2359ccb126151217976408720c1ba Signed-off-by: Peter Mikus <pmikus@cisco.com>
2018-07-02Compatibility fixes with Ubuntu 18.04Peter Mikus3-10/+26
Currently we are using ip:port socket to for VPP to listen for incoming connections. There is only one place in code this socket is used for detection if VPP is responding after restart. This patch is supposed to change ip:port to sock:file which is default preffered way in VPP. This way we can start using vppctl. netcat on the other side with ip:port remains hanged in console for infinite time not returning back. There is also need to check whether uio_module is loaded and eventually load it. As uio_pci_generic is not working there, we will fallback to main igb_uio (uio_pci_generic being only lightweight subset of igb_uio). This patch also add additional verbose output to console during setup to better understand if failure happens during copy/extract/setup. Change-Id: I0b8a3b76dce3316496a3ad928f58718b6e73057d Signed-off-by: Peter Mikus <pmikus@cisco.com>
2018-06-29HC Tests: use vpp-fib-management module in dhcp tests (HC2VPP-348)Marek Gradzki1-1/+1
Addaps HC DHCP tests to https://gerrit.fd.io/r/#/c/13299/ Change-Id: I874da5ee76fcfdb5039c1b3ad33aec4af80396d0 Signed-off-by: Marek Gradzki <mgradzki@cisco.com>
2018-06-29SetupFramework to detect failures, part IIPeter Mikus1-10/+4
- This patch is enforcing evaluation and aligning all __init__.robot files to use the same logic. Change-Id: I9e2bf5e904bb6d22f4e6a153c951c3b3c233e2fb Signed-off-by: Peter Mikus <pmikus@cisco.com>
2018-06-28FIX: SetupFramework to detect failuresPeter Mikus1-65/+57
- Fix behavior of setup framework to properly detect and raise exception in case of any issue occurs during framework setup on any node - General code cleanup Change-Id: Id4cf36e221817600164b25d5551582838b0f0d5e Signed-off-by: Peter Mikus <pmikus@cisco.com>
2018-06-22CSIT-1043: Execute pci rescan only if neededjuraj.linkes2-51/+27
Pci rescan is a rather invasive process, which is why it should be executed only if needed. This patch moves the pci rescan after pci device driver discovery, rescanning the devices for further attemps at driver discovery. Change-Id: I29c939b44c3f67371416a99c711e057f711ba9b4 Signed-off-by: juraj.linkes <juraj.linkes@pantheon.tech>
2018-06-21HC2VPP-331: Fix Honeycomb fails to assign VRF to interfaceMichal Cmarada2-0/+206
- add configuration for FIB table management to test suite - fix routing test suite HC2VPP-331 bugs - fix intip4-intip6 test suite HC2VPP-331 bugs Change-Id: I0b1e9ed787d9fb68e76a6d61c1eea2519a36a6c4 Signed-off-by: Michal Cmarada <michal.cmarada@pantheon.tech>
2018-06-20Revert "CSIT-986: Use MLRsearch from pip"Peter Mikus8-3/+809
This reverts commit 0c2c57d9965ab1db0d5404ad103871ac250339cb. Reason for revert: unless you will fix this broken patch we have to revert this as it breaks several thing in the csit core ci/cd. 1) all tb are pypi offline this means no new pypi is automatically dowloaded. Everytime you change your version you have to update every tb. As this is not automated this will never work and put extreme overhead 2) this code is not pylint checked and not verified by any existing job breaking any kind of verificition mechanics in csit 3)there is no automation in terms of creating pypi (no job) this creates chicken egg problem that you cannot verify change unless new version is installed Next time please think or consult with more seniored csit core developer Unless above will be fixed i will revert on monday as now it breaks all jobs. I will set hard verification to framework setup (exception) so this will prevent next time merge. Possible solution: 1)Move the directory back to resources and reference from csit directly not via pypi, leave the setup crap in dir and let users to create package on their own Change-Id: Id530a9f19f668e45f73ffc9e7371bb453b59fd1b Signed-off-by: Peter Mikus <pmikus@cisco.com>
2018-06-18CSIT-986: Use MLRsearch from pipVratko Polak8-809/+3
+ Delete resources/libraries/python/search/. + Add MLRsearch==0.1.1 to requirements.txt. + Bump PyPI/MLRsearch version to 0.1.2. Change-Id: I1f86d75ac8eb90ee3946dbac8c56280f39302f4d Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2018-06-18CSIT-986: Implement proposed MDR improvementsVratko Polak7-131/+137
+ Use first intermediate with goal in initial phase. + Measure above MRR if that got zero loss. + Always prioritizes NDR in internal search. + Rename classes. + Copy code for standalone PyPI publishing. - Original files will be deleted after publish. Change-Id: I5169d602d1e5e35a1894645cd52e70d791871608 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2018-06-08CSIT-1081 Container VPP configuration refactorPeter Mikus5-37/+220
Adopt code for various topology configurations. Change-Id: Iaf9d7995ab8cd06da0c56c5e5664d57d19e74d7c Signed-off-by: Peter Mikus <pmikus@cisco.com>
2018-06-07CSIT-1121: Add "Get DPDK version" KW to DPDK testsTibor Frank2-3/+1
Change-Id: I6152b3b7d4895a376914166d03ee9ca15ea9eb32 Signed-off-by: Tibor Frank <tifrank@cisco.com>
2018-06-01VPP link bonding - lacp modeJan Gelety4-32/+245
CSIT-1072 CSIT-1083 CSIT-1084 Change-Id: Icaf0e09af633d301306a84251f47822e95b411a2 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2018-05-31DPDK link bonding: xor modeJan Gelety5-14/+235
CSIT-1073 CSIT-1074 CSIT-1077 Change-Id: I248e079021c30988210fd792b32d5afdca71aadb Signed-off-by: Jan Gelety <jgelety@cisco.com>
2018-05-23CSIT-1087: Add SRv6 MRR testsTibor Frank1-3/+18
Change-Id: Ia90a9bff6791518ba08fa81e6167e96aea7714d5 Signed-off-by: Tibor Frank <tifrank@cisco.com>
2018-05-18CSIT-986: MDR rst documentationVratko Polak1-0/+1
+ Introduction. + Phases description. + Comparison tables. + Graphs. Change-Id: Iec5143770677c733070fb0444a1a7d898f1eb04e Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2018-05-17HC tests: fix 'Archive Honeycomb logs' KW docsMarek Gradzki1-1/+1
Change-Id: I10851345579ee751b0b79b807fed140e4614685f Signed-off-by: Marek Gradzki <mgradzki@cisco.com>
2018-05-16HC Tests: adapt NAT tests to ietf-nat@2018-02-23.yang (CSIT-1086)Marek Gradzki2-5/+5
Requires: https://gerrit.fd.io/r/#/c/12516/ Change-Id: Ie0a3452f51fb89914a6a0c53aa4136279a3dfb47 Signed-off-by: Marek Gradzki <mgradzki@cisco.com>
2018-05-16CSIT-992: Fix intermediate phases MDR parameterVratko Polak3-14/+21
Also add TODOs and improve comments. Change-Id: I50bd652c83c272c3f7662dd487ab617be2b7de08 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2018-05-16HC tests: archive ODL logs (CSIT-1031)Marek Gradzki2-2/+59
Change-Id: I444a5d6cd32cb9ee68575dfdb5a208de2c4eb72a Signed-off-by: Marek Gradzki <mgradzki@cisco.com>
2018-05-14CSIT-1036 Expose option to install DKMS in containerPeter Mikus2-9/+4
Expose DKMS installation as suite variable. This will allow to use DPDK driver for future tests. Change-Id: I38fd014c8cf6f4bf42881af2196cadc679fe53e0 Signed-off-by: Peter Mikus <pmikus@cisco.com>
2018-05-12CSIT-1079 Add multiple mount dirs into containerPeter Mikus2-56/+61
Pass the list of mount dirs into container LXC/Docker Change-Id: Ie80062563955273791ab63e156bf0b369e5be649 Signed-off-by: Peter Mikus <pmikus@cisco.com>
2018-05-11CSIT-1076 Improve SSH connection handlingPeter Mikus1-25/+36
Properly detect dropped connection via predicate is_active() to prevent using dropped connection. Change-Id: I9105622f28d2f7949675b8cee1dd4384a12f72a9 Signed-off-by: Peter Mikus <pmikus@cisco.com>
2018-05-10CSIT-992: Give MDR parameters official namesVratko Polak5-118/+131
Change-Id: I1da9a64fb06e015f2b2a0aacb46a53d70349b4b6 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2018-05-10Cleanup DPDK framework setupPeter Mikus2-236/+38
Moving installation of DPDK into KW instead of framework setup. This will unify the framework setup and allow future optimizations. Change-Id: I360ba95a2858e73e4bbb12020567d5d174ab69ca Signed-off-by: Peter Mikus <pmikus@cisco.com>
2018-05-10HC2VPP-253 - Update routing csit jobsMichal Cmarada1-16/+9
this fixes test failures caused by HC2VPP routing models bump (https://gerrit.fd.io/r/#/c/10954) - updates tests for bgp routing - updates tests for routing - updates SLAAC test because of changes in rt-advertisements Change-Id: Iacc37b42e6523f440d77241c18ca8e61d1d01f23 Signed-off-by: Michal Cmarada <michal.cmarada@pantheon.tech>
2018-05-10CSIT-1071 Add traffic evaluation criteria to MRRPeter Mikus2-3/+16
- Fail the testcase if there is no traffic pass. Change-Id: I162187073aafa286793ce488fda9fd065bb55213 Signed-off-by: Peter Mikus <pmikus@cisco.com>
2018-05-09FIX: SSH connect issuePeter Mikus2-28/+19
error: [Errno 9] Bad file descriptor Change-Id: I4c5278d41e979f6af43054e3b5890fb154555494 Signed-off-by: Peter Mikus <pmikus@cisco.com>
2018-05-04CSIT-992: Shorten MDR search test messageVratko Polak1-9/+6
Change-Id: I79c78d4d8ca1611a287bd117e480c4317d27e287 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2018-05-04CSIT-992: Add libraries for optimized searchVratko Polak9-20/+1078
+ Place the libraries into resources/libraries/python/search/. + Except OptimizedTrexSearch in TrafficGenerator.py + Change traffic generator to support floats for duration and warmup. + Remove explicit type conversions where not needed. + Add robot keywords to performance_utils.robot + for calling the optimized search. + for reporting the resulting values. + for checking the minimal performance has been reached. + for running five second "Traffic should pass with no loss" after the search. - Add methodology documentation in subsequent Change. - Add simulator for testing algorithm correctness in a subsequent Change. - Add tests using the libraries in subsequent Change. Change-Id: Ia041008382ee4c9a562172099aea794c854d5f2f Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2018-05-04Fix various pylint 1.5.4 warningsVratko Polak15-45/+43
+ DUTSetup.py:424 Else clause on loop without a break statement + InterfaceUtil.py:400 Else clause on loop without a break statement + QemuUtils.py:564 Wrong continued indentation + SetupDPDKTest.py: Locally enabling broad-except + VatExecutor.py: Catching too general exception Exception + ssh.py:95 No exception type(s) specified. + HTTPRequest.py: Tolerate HTTPCodes.OK + multiple: Drop ":returns: None" from docstrings. There are still several warnings present: - R0902(too-many-instance-attributes) - R0912(too-many-branches) - R0913(too-many-arguments) - R0914(too-many-locals) - R0915(too-many-statements) - R0401(cyclic-import) And there are multiple blocks of similar lines, mainly across various Setup*Test.py files: - R0801(duplicate-code) Change-Id: I582575cb52b85d69d268e6374852f6e74bb71052 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2018-05-04FIX: TCP perf testsTibor Frank2-0/+29
Change-Id: I59ad8ef70fc2bedce14b52359922a002f960ab7a Signed-off-by: Tibor Frank <tifrank@cisco.com>
2018-04-25Fix warnings reported by gen_doc.shVratko Polak57-542/+563
+ Docstring warnings fixed. + Multiline param descriptions indented by 4 spaces. - Except the PacketVerifier.py one - I have tried several quote-like blocks, nothing works. - Rst warnings not fixed. - How can I fix them? They refer to temporarily created files. + Other improvements: + Python lines no longer than 80 characters. + :return: -> :returns: + Notes before params. + :raises + closing colon after exception class. + Description is a sentence. + Present tense in conditional sentences. + Bumped copyright year in edited files. Change-Id: I462c194eeecb666dc146e26858486a07c990be9b Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2018-04-25FIX: SSH socket reading errorPeter Mikus2-19/+18
Currently if the command timeouts due to the nature of script execution we are trying to again read from socket after timeout on seesion expired. This patch is supposed to fix the behaviour and eliminate the second read from channel after it was cloed. Change-Id: Ib0028e901eb6ff4d10ca77d2ea19f9e770e6cef4 Signed-off-by: Peter Mikus <pmikus@cisco.com>
2018-04-24CSIT-1019: Fix PacketVerifier.RxQueue receive timeout issueLucian Banu1-28/+23
Change-Id: I0f7f54e721843b0252ac969ddfabc769a632c1a0 Signed-off-by: Lucian Banu <lucian.banu@enea.com>
2018-04-23CSIT-1009: SRv6 proxy testsJan Gelety9-16/+215
- SRv6 with endpoint to SR-unaware Service Function via static proxy - SRv6 with endpoint to SR-unaware Service Function via dynamic proxy - SRv6 with endpoint to SR-unaware Service Function via masquerading proxy Change-Id: I6a6062cb41d810bf9e27dacfd866181bfde4c693 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2018-04-20FIX: Restart VPP in container before each testPeter Mikus3-0/+14
Change-Id: Iec7045aadc0675e04b8c74cbe28f8b3f193bcf1f Signed-off-by: Peter Mikus <pmikus@cisco.com>
2018-04-20FIX: Configure number of memif queus properlyPeter Mikus3-12/+24
Change-Id: I2dcb0300829bc961c80cc30d972d0563aeba9364 Signed-off-by: Peter Mikus <pmikus@cisco.com>
2018-04-19FIX: Memif tests failingPeter Mikus3-2/+20
- CSIT-1049 Change-Id: I073c1e6d8cdda835fbb955cbf79e982bc2cc6228 Signed-off-by: Peter Mikus <pmikus@cisco.com>
2018-04-16Make default driver configurablePeter Mikus2-7/+8
- Make UIO driver configurable from global variables. - Prepare code for uio_pci_generic to vfio-pci change Change-Id: I2b49201177a92f51673242a30e2fd8d4f7e59694 Signed-off-by: Peter Mikus <pmikus@cisco.com>
2018-04-12Add more verbose DPDK logsPeter Mikus2-0/+10
Change-Id: I98a07fa88d4959ab05996e053c5c02ef9bda5039 Signed-off-by: Peter Mikus <pmikus@cisco.com>
2018-04-11CSIT-1037 K8s container extensionsPeter Mikus1-1/+1
- Add new K8S topologies on i40 based nic Change-Id: Id20f1e15dab347edee128633230aa098b774e43d Signed-off-by: Peter Mikus <pmikus@cisco.com>
2018-04-11Update DPDK to 18.02Peter Mikus4-82/+93
- Update DPDK version to 18.02 - Code cleanup. Change-Id: I33e2aa35cc80092561a4db99d75bdc7e4b62df3a Signed-off-by: Peter Mikus <pmikus@cisco.com>
2018-04-11Cleanup perf bootstrapPeter Mikus1-16/+6
- Remove the DPDK_TEST variable and replace it by internal global variable - Unify all perf boostrap for merge in future. - Cleanup ligato perf bootstrap. Change-Id: Id47d6614c8dd18a701493e00056ef17d2e37fc5c Signed-off-by: Peter Mikus <pmikus@cisco.com>
2018-04-11Create unified service operationsPeter Mikus4-58/+96
- Add ability to dump the logs from service unit (since last start) - Cleanup service code to more streamlined way. Change-Id: I6e332dce3229727dd36fd72a8ecfb9fc9efe4d63 Signed-off-by: Peter Mikus <pmikus@cisco.com>
2018-04-10FIX: Crypto execution orderPeter Mikus3-179/+95
Currently, VAT history looks like this: sw_interface_set_flags sw_if_index 2 admin-up sw_interface_set_flags sw_if_index 1 admin-up sw_interface_dump sw_interface_set_flags sw_if_index 2 admin-up sw_interface_set_flags sw_if_index 1 admin-up sw_interface_add_del_address sw_if_index 2 192.168.10.1/24 sw_interface_add_del_address sw_if_index 1 172.168.1.1/24 ip_neighbor_add_del sw_if_index 2 dst 192.168.10.2 mac 68:05:ca:3a:af:40 ip_neighbor_add_del sw_if_index 1 dst 172.168.1.2 mac 68:05:ca:35:78:e9 ip_add_del_route 10.0.0.0/8 via 192.168.10.2 sw_if_index 2 resolve-attempts 10 count 1 exec exec /tmp/ipsec_create_tunnel_dut1.config It should be like this: sw_interface_add_del_address sw_if_index 2 192.168.10.1/24 sw_interface_add_del_address sw_if_index 1 172.168.1.1/24 ip_neighbor_add_del sw_if_index 2 dst 192.168.10.2 mac 68:05:ca:3a:af:40 ip_neighbor_add_del sw_if_index 1 dst 172.168.1.2 mac 68:05:ca:35:78:e9 ip_add_del_route 10.0.0.0/8 via 192.168.10.2 sw_if_index 2 resolve-attempts 10 count 1 exec exec /tmp/ipsec_create_tunnel_dut1.config sw_interface_set_flags sw_if_index 2 admin-up sw_interface_set_flags sw_if_index 1 admin-up Change-Id: I4e943436dee00166966b4f53d9d0a40440bbf1e4 Signed-off-by: Peter Mikus <pmikus@cisco.com>
2018-04-06FIX: VAT SSH timeoutPeter Mikus4-61/+56
Currently when VAT cannot connect to VPP via direct API call, there is inner timeout of ~100s until it quits and returns RC. In our code we are setting outer timeout to 10/15s to detect if VAT is not responding. If VAT does not respond quickly enough due to e.g VPP crash, we are incorrectly reporting SSHTimout exception. This fix is suppose to set correct timeout values and also to set some of the calls like show run|hard|err / clear to detect whether they were successfull or not. + Various small library cleanup. Change-Id: I787c4baecd7e086705a4076643e255a875ea8438 Signed-off-by: Peter Mikus <pmikus@cisco.com>
2018-04-05FIX: Change plugin default behavior for Container tests Peter Mikus1-2/+1
Looks like disabling all plugins in container leaving only memif_plugin.so results into issue that could lead into lost of SSH connectivity to TB or in better case to not handling any traffic. This fix is supose to return previous behavior for Container instance of VPP. vpp_config.add_plugin('disable', 'dpdk_plugin.so') Change-Id: I7bca6c73c0f5aaf30d423b90ff7c2d2c38d54700 Signed-off-by: Peter Mikus <pmikus@cisco.com>
2018-04-05Revert "FIX: Change plugin default behavior for Container tests"Peter Mikus1-1/+2
This reverts commit c754789176b1a3ca00a129d3d207aa5a6bad7c27. Change-Id: Ic1bbe8fac0d98f41aa8b1b57da0c7a147111340b Signed-off-by: Peter Mikus <pmikus@cisco.com>
2018-04-05FIX: Change plugin default behavior for Container testsPeter Mikus1-2/+1
Looks like disabling all plugins in container leaving only memif_plugin.so results into issue that could lead into lost of SSH connectivity to TB or in better case to not handling any traffic. This fix is supose to return previous behavior for Container instance of VPP. Change-Id: Ie8b3ce2e35a40c8f3498e490abb6967cd4dd912a Signed-off-by: Peter Mikus <pmikus@cisco.com>