aboutsummaryrefslogtreecommitdiffstats
path: root/resources/libraries
AgeCommit message (Collapse)AuthorFilesLines
2021-03-03Add test suites for crypto sw scheduler engineYulong Pei6-5/+165
This patch is to add test suites for vpp plugin crypto_sw_scheduler, IPsec sync mode is to do crypto and packet forward work in same worker cores, crypto_sw_scheduler can schedule crypto work to other async crypto cores to improve whole crypto processing capability. This test suites configure fixed 1 rx queues per port, then measure IPsec performance with 1, 2, 3 crypto cores. This patchset include 1, 2, 4, 8 ipsec tunnels test cases. +Vratko help to change to count total physical cores instead of previous only count crypto cores in test cases. Change-Id: I0e67182e3d13273890a23703d838101900e25126 Signed-off-by: Yulong Pei <yulong.pei@intel.com> Signed-off-by: Vratko Polak <vrpolak@cisco.com> Signed-off-by: pmikus <pmikus@cisco.com> (cherry picked from commit f0e964d35af36f0923c6ae0421e74d94022cadba)
2021-02-19FIX: Naming convention compliancepmikus1-1/+1
Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: Idcee623abbc5568fc6ca49113bc2ff8add179046 (cherry picked from commit 1f6797ed6b662130f55d7629453c5010ed94162a)
2021-02-19Framework: GSO testpmikus2-1/+70
Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I874568aebbe50c38e634438eb1201ca737bd18ad (cherry picked from commit ecfe59f83a49e0dda9cead06b81339e4ea545053)
2021-02-17PAPI: Python 3.8 compatibilitypmikus1-5/+7
Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I33fefddda9055524c1817b13b5c99bb1b97ebff4 (cherry picked from commit 96c5f5ef45cf039691404a4451b1c6d9260d6ea0)
2021-02-08FIX: Nic selectionpmikus1-2/+2
- Buggy unnoticed for quite some time Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I7d2387186e0250b80d664e2f004f909fd80c7bfa (cherry picked from commit 127eb76dfeca04e123b0d7cc229c4a71ee3f2f9a)
2021-02-08Traffic generator: Force ramp-up in next testVratko Polak1-2/+2
The behavior was already documented, just not implemented properly. Change-Id: Ib8c232c004e91032e1230e86dda9f70bdfab43ad Signed-off-by: Vratko Polak <vrpolak@cisco.com> (cherry picked from commit 28ed095b73c4a01ed73c93b3b80da22a4bcca907)
2021-02-05NAT44ed: Add pure throuhput bidir testsVratko Polak5-71/+313
+ With ramp-up, without reset, with session verification. + Uses the same profile as pps tests. + Ramp up duration is not specified, as duration is computed. + Timeout tracking with automated ramp-up. + Correct computation of next duration. + Checking both early and late sessions. + No loss measurement also acts as a ramp-up. + Return ReceiveRateMeasurement from send_traffic_on_tg_internal, as that is needed for detecting whether trial is ok as ramp up. - Udp needs quite low ramp-up rate after recent regression. - Max scale has higher rate (so failing) to avoid session timeouts. + Bump copyright year. Change-Id: I50c928659cd5b985b490a2e5fb69c5cd790600b0 Signed-off-by: Vratko Polak <vrpolak@cisco.com> (cherry picked from commit b26fe6de7965f6621b54a80a938f82afe95aa585)
2021-01-21Reconf: Fix bidir/unidir mismatchVratko Polak1-14/+15
Results if NDR search is in TPS (so unidir) since https://gerrit.fd.io/r/c/csit/+/28208 The bug was causing all reconf tests report zero loss, as they used half of NDR load during reconfiguration. + Small improvements to descriptions of other traffic keywords. Change-Id: Ib9af5861cc09e698eb762feb3f0a019571d17962 Signed-off-by: Vratko Polak <vrpolak@cisco.com> (cherry picked from commit 293a88b56179094f655178b838b84844a672390d)
2021-01-09perf: GENEVE tunnel test, l3 modeJan Gelety3-5/+7
Jira: CSIT-1768 Change-Id: I888ae1a5754fa07297d4cdf65c2be0e3e49d89a5 Signed-off-by: Jan Gelety <jgelety@cisco.com> (cherry picked from commit 6962831a1f1905e50a3d663c0cf3ce8c2873ecc9) Change-Id: I6496ae773b176b2abfedab843110d6f870c62888 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2021-01-11tests: add 2n1l l2 acl tests, update 2n-tx2 specsJuraj Linkeš1-7/+12
Modify initialize L2BD ACL keywords to be usable for both 2-node and 3-node topologies and update testsuites accordingly. Add the missing macip T-rex profile. Add classifier tests to 2n-tx2 job specs. Change-Id: I17b84b8fc18ef9a6f275ae0238a0665ac2017f01 Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech> (cherry picked from commit 9d510d595f73d26e3f7c6646fa6530e8f252f790)
2021-01-11Infra: Increase shm-sizepmikus1-2/+2
Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: Ib9dfb8623757fd23fd8b49b5e04ed86e202ada66 (cherry picked from commit 2f4b14bc83437afcc242190a121ba47a6d10bd09)
2021-01-11FIX: Backward compatibility include selectionpmikus1-2/+9
Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: Ieff60a44d42d66acee8ba1680e7e285d6cd01bc9 (cherry picked from commit e62ade12b7c9918cda2d363387ed0f517aa9840d)
2021-01-07PAPI: Cache connected client instancesVratko Polak5-97/+480
Disconnect+connect cycle is expensive and slow. This change tracks connected client instances so later "connect" to the same target uses it. Explicit disconnects are allowed (and executed before VPP ends), but once again disconnected instances are cached and reused, as creating a new instance is more expensive than just connect. + Add missing checks on interfaces being up to appropriate keyword. + Use appropriate keywords. + Add a comment explaining why a simpler keyword is not appropriate. + Improve VPP checks in containers. + Fix the vppctl check to actually work. + Add PAPI check to ensure VPP is really ready. + Delay/reorder checks to make them faster with multiple containers. + Leave some TODOs to improve various lifecycles later. + As we do not stop VPP in test/suite teardown: + One final disconnect is needed, added to __init__.robot teardowns. - Import of the final disconnect keyword is ugly, but it works. - We could use a hashable class for distinguishing node+socket pairs. - Are we connecting to VPP inside VMs? Change-Id: I49cd726740c3e8cae1591c7c84b85a447241228f Signed-off-by: Vratko Polak <vrpolak@cisco.com> (cherry picked from commit a33b52ae0f255021d89307ebc694f6e907906151)
2021-01-04fix: geneveJan Gelety1-3/+3
Change-Id: I23541e1c07a42b4baa560c343ffeed3b963fe694 Signed-off-by: Jan Gelety <jgelety@cisco.com> (cherry picked from commit d7a3262b58c86868a18c29244f29196203e1eb39)
2021-01-04API: deprecated COP APIsTomas Alexy2-22/+22
Signed-off-by: Tomas Alexy <tomas.alexy@pantheon.tech> Change-Id: Ifb97088a26f3c2ab2ecee28ed43e6e957a844c64 (cherry picked from commit 9446b9bf9c15999feec3c8a48fec428bca094500)
2021-01-04GSO: TAP/VHOST use casepmikus14-65/+983
Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: Ibafaaca4438587284d1e255c764f0701002941e8 (cherry picked from commit 44dcb3113c8ade2e44543746abca861a89362c9b)
2021-01-04FIX: AWK NIC replace in case of x520pmikus1-1/+1
Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I7d83ba048e0609d6b8623fab5c2960e48a37c023 (cherry picked from commit 3c3930b9f6f9a40d6b30f6e56e8c40279e34f650)
2021-01-04Switch include to testpmikus1-22/+36
+ Reduce time overhead when parsing --include vs --test + Input files will remain the same + 3n-hsw 150include ~24min, 150test ~5min + 2n-clx 489include ~61min, 489test ~9min Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I7e5957c32385aecbc4551bd124da41afa5bc63c9
2020-12-21Framework: add 2n-tx2 perf testbedJuraj Linkeš1-1/+12
Add testbed file and make code changes in common.sh. Change-Id: I493bb92db3c66358afa81ec81bcd99b296f49c03 Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech> (cherry picked from commit 7aa013cf087993ca4546fd7988e177d43cfedfaf)
2020-12-21API: deprecated bond APIsJan Gelety5-61/+47
Jira: CSIT-1597 Change-Id: I77b746584851331d46eca1caafd4468d18f1e78d Signed-off-by: Jan Gelety <jgelety@cisco.com> (cherry picked from commit 925b50c85a24b3c91031d09eeca19f17b4e01f2c)
2020-12-11API: deprecated nsim APIsJan Gelety1-3/+11
Jira: CSIT-1597 Change-Id: Ice342d6cb7cd244d712c42a3d468c851c79739f4 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-12-16API: deprecated IPSEC APIsJan Gelety4-134/+388
Jira: CSIT-1597 + add ipsec_sa tear down action Change-Id: I4d1e6f26c14e61e8ddc6f29fbf5528a034c84eb0 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-12-09Tox: Add GPL license checkerVratko Polak2-1/+74
A common mistage is to add a file into GPL directory, with Apache license only. This adds a tox checker to vote -1 on such changes, gpl_license.log contains the list of affected files. There are TODOs related to unlicensed files or unconventional GPL licenses. Change-Id: I267e4fb98afd199d5acc7d211068b28c97b31dc9 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2020-12-03vpp-device: GENEVE tunnel test, l3 modeJan Gelety7-90/+366
Jira: CSIT-1769 Change-Id: I98510cd8e627d7347f77d0032b7bac28f2e36c61 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-12-08Revert "vpp-device: GENEVE tunnel test, l3 mode"Peter Mikus7-366/+90
This reverts commit a9f54ca5080aeef17686f300a6807bf9b46b7c90. Reason for revert: DO NOT MERGE BROKEN TESTS!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! https://logs.fd.io/production/vex-yul-rot-jenkins-1/csit-vpp-device-master-ubuntu1804-1n-skx/9918/archives/log.html.gz Change-Id: I2ce2970a43e5dd7487eeb54d1ccbb149e06cf8fa Signed-off-by: pmikus <pmikus@cisco.com>
2020-12-03vpp-device: GENEVE tunnel test, l3 modeJan Gelety7-90/+366
Jira: CSIT-1769 Change-Id: I0ab906966f760b809b8431530c010a8f0835d62c Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-12-07Fix vpp-csit device scriptVratko Polak1-1/+0
In Gerrit 30041 that was not tested properly. Change-Id: I42f57f1933b0e7d029030f4ec502f7268780827b Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2020-12-04vpp_device: fix vpp device kernel driver bindingJuraj Linkeš1-9/+5
Attempt to unbind a driver from a device only if it is bound to a driver. Remove the dynamic addition of an existing device ID to a driver. From the docs [0]: Writing a device ID to this file will attempt to dynamically add a new device ID to a PCI device driver. Since we assume the VFs are bound to the kernel driver when VPP Device topology creation is done, it implies that the kernel driver supports the device ID of those VFs, removing the need to add the support. [0]: https://www.kernel.org/doc/Documentation/ABI/testing/sysfs-bus-pci Change-Id: I20f3ca071a5a84a06ff358ba514532248a8f9ad0 Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
2020-12-02Avoid ci-management archiving files twiceVratko Polak6-70/+54
This is a follow-up to https://gerrit.fd.io/r/c/csit/+/20394 https://gerrit.fd.io/r/20119 has changed the way archival works, everything should now go to logs.fd.io (instead of appearing on run page in jenkins.fd.io). The glob pattern for archiving is quite eager, doing recursive search. That is good, as it can find also misplaced useful outputs. But it also means our usage of copy_archives function creates two copies of archived directtories, usually archives/ and archives/archive/. This change renames copy_archives to move_archives, with few workarounds to support multiple calls. I also renamed ARCHIVE_DIR value from $CSIT_DIR/archive to $CSIT_DIR/archives to make "move" operation look natural. Finally, download_builds function is being removed, as after recent improvements to VPP compilation speed nobody seems to be using it. Change-Id: I19a429e1dfdfaab7fcf32a9609963b1aebd33c6c Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2020-12-02API: deprecated NAT APIsJan Gelety2-11/+16
Jira: CSIT-1597 Change-Id: Ib48d20ba087bc9828970c3acc081ac6e4447c20c Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-12-01Tolerate base64 encoded Gerrit commentsVratko Polak1-2/+8
+ Move "|| true" to a place that really aviods errors. + Attemp to parse decoded string if trigger is not found in plain one. Change-Id: If3587229ec588f9ad41acb3050add1142032d2d8 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2020-11-26Re-enable 9000B tests for ipsecVratko Polak1-4/+0
Ticket: CSIT-1771 VPP-1207 VPP-1675 Change-Id: I8ba2d62054361e72b833943327434ea071e7e568 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2020-11-26Support CLI command change for event loggerVratko Polak1-2/+7
+ The old command is tried if the new one fails. Change-Id: I0afdcd7ac699595347b42f3a7d34e1281bb0dc0e Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2020-11-26vpp_device: disable IPv6 in containersJuraj Linkeš1-0/+3
Even with IPv6 nd disabled in VMs, there are IPv6 packets coming from DuT: --dut_if2_mac ba:dc:0f:fe:02:05 ... dst = 33:33:00:00:00:01 src = ba:dc:0f:fe:02:05 Docker disables IPv6 by default on interfaces it manages, which doesn't include VF interfaces. Disabling IPv6 in containers using sysctl may fix this. Change-Id: Idba506653442a3da2cd82e69cedddb3294d92788 Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
2020-11-25Add rxq_thr optionpmikus1-1/+2
Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I46750f8571d86dc13df95252e8894c4b988efd5c
2020-11-18T-Rex: 2.86pmikus1-1/+1
Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: Id56b87ab868f2897a6563914b0beca2acc25e706
2020-11-16Ansible: Remove vpp_device snergster dependencypmikus2-9/+9
Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I145a4b5511141f1e2b4e387daa358e32dd2c8015
2020-11-10TCP CPS: Count NAT sessionsVratko Polak1-2/+4
The previous code counted full TCP connections, which need one more packet, leading to worse results. Change-Id: Ifcf78356b6ed54819ea0bf5aa069d7d9cb951183 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2020-11-10Speed up test archive compressionVratko Polak1-1/+1
16 times faster setting at cost of 50% larger archive. Before: $ time ( cat tests.tar | xz -9e > tests.9e.tar.xz ) real 0m41.640s user 0m41.009s sys 0m0.602s $ wc -c tests.9e.tar.xz 913432 tests.9e.tar.xz After: $ time ( cat tests.tar | xz -3 > tests.3.tar.xz ) real 0m2.422s user 0m2.294s sys 0m0.161s $ wc -c tests.3.tar.xz 1556080 tests.3.tar.xz Change-Id: Ia5c86183d4e19db3cbf95dd84cf86ee720ef4051 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2020-10-29Support existing test types with ASTFVratko Polak17-1091/+2048
+ Add UDP_CPS, TCP_CPS, UDP_PPS and TCP_PPS suites. + Update existing cps traffic profiles. + Add missing traffic profiles. + UDP: + Single burst of 32 packets was confirmed as safe enough for TRex. + Maybe 64 could work, but not enough testing for that. + Multiple bursts have lead to reduced TRex performance, as overlaping bursts (from different client instances) tend to fill up the buffers. + TCP: + Data size set to 11111 bytes, completely arbitrarily. + Results look reasonable, so I have kept that. - MSS not set at all - No tested support for frame size other than 64B. - Frame size does not even factor into TCP profiles. + So other frame sizes are skipped in autogen. + Update tags in related suites. - HOSTS_{n} and SRC_USER_{n} should be unified. - Questionable clarification on difference between IP4BASE and SCALE. + Add NAT state resetters to tests that need them. + Resetter is called (if set) before each measurement. + If ramp-up is detected, resetter is not set. + Rename "mult" argument to "multiplier". + Abstracted from packets to transactions. + Transaction corresponds to profile. + TRex multiplier argument sets target rate in transactions per second. + The familiar STL traffic: + Bidirectional is considered to be 2 packets per transaction. + Unidirectional is considered to be 1 packet per transaction. + The newer ASTF traffic: + 4 subtypes, each has different number of packets per transaction. + For max rate computation: + Packets in the more numerous direction are considered. + Rely on TRex reported traffic duration for ASTF: + Use the server side value. - Client side value is higher by an overhead. - TRex is not sending traffic during that time. + Remove delays from traffic profiles. - Those delays would increase the reprted traffic time. + Support for scale lmited trials. + Only for ASTF profiles, each ASTF profile has limited scale. + Scale defined in suite variables. + For TRex to send all transactions provided duration value is ignored. + The appropriate value is computed in TrafficGenerator. + An ad-hoc time constant is added to match the TRex client side time overhead. + The profile driver receives the computed duration. + Measurement for PLRsearch add a sleep if the computed duration is smaller. + Alternative argument for search algos if scale is limited. + Both need higher timeout to accomodate big scales. + MLRsearch can afford fewer phases. + Added a parameter to optionally shorten the duration. + Use short duration for runtime stats trial and failure stats trial. + Use very large keepalive values in udp profiles to avoid ka packets. + No polling in ASTF profile driver. - Polling could eliminate the time overhead value. + But polling proved to introduce some loss, affecting the results. + Handle duration stretching in ASTF by stopping traffic. + The stop has several steps so that: + The traffic is really stopped entirely. + Late packets do not count (maybe as errors). + Stats are preserved to read for results (and cleared afterwards). + Several quantities added to ReceiveRateMeasurement: + Original target duration is preserved (algos need that). + Input estimate (tps) for early search iterations. + Output estimate (maybe pps) for MRR output. + Strict result (unsent counts as loss) for NDR. + Use L2 counters (opackets, ipackets) where possible. - TRex has trouble processing packets for the L7 ones at high loads. + Remove warmup from profile drivers and keywords. + Suites should call "Send ramp-up traffic" explicitly if needed. + Added parsing for few more counters. + Both to use in formulas or just for debug purposes. - Only 64B cases in autogen, framesize support to be added later. + Latency streams during search can be enabled via PERF_USE_LATENCY env var. + MLRsearch improvments: + Rename argument names to min_rate and max_rate. + Use relative receive rate in initial phase. + PLRsearch improvements: + Careful computation when output (pps) does not match input (tps). + Use geometric distribution (instead of Poisson). + Helps agains math errors. + This should improve estimate stability. - But in practice big losses still lead to significant jumps. + Traffic generator improvements: + send_traffic_on_tg now calls the full set_rate_provider_defaults. + _send_traffic_on_tg_internal for the logic without provider defaults. + As the internal function is re-used by measure() without affecting defaults. + Move _parse_traffic_results just before get_measurement_result. + As the latter uses fields set bu the former, it is now easier to read. + Multiple sources for approximate duration. + Tried from more precise to more available. + Includes logic for _pps tests (added in later change). + Move explicit type conversions to earlier occurences. + Profile driver output field uses semicolons to simplify parsing. + Performance Robot lib file split to several smaller ones. + performance_actions.robot: + Hosts Additional Statistics Action For * keywords. + performance_display.robot: + Hosts keyword for displaying and verifying results. + Change test message to use the correct unit (pps or cps). + performance_limits.robot renamed to performance_vars.robot + Added many keywords, mostly for accessing test variables. + Moved variables for Policer into a new keyword there. + Some keywords need sophisticated logic. - Other are basically Get Variable Value. + But in future more logic can be added, without editing callers. + Documentation for the new keywords acts as a documentation for test variables. + performance_utils.robot has the rest. + Eliminated arguments if the value is in test variable. + Small improvements to documentation. - Still not enough cleanup with respect to arguments and test variables. + Keywords are sorted alphabetically now in each one. + Suites: + Unified variables table: + No colons in comments. + ${n_hosts}, ${n_ports} and use them instead hardcoded numbers. + Add -cps to existing cps suite names. + Remove "trial data overwrite". + Compute max rate as in STL suites. + Each NAT suite has ip4base suite to compare results to. - Those act as indirect TRex calibration. - VPP does not lose packets in those. + Latency in ASTF suites is disabled hard. - As we do not support latency in ASTF profiles yet. + Unidirectional tests governed by suite variable, not an argument. + Write long argument lists vertically. + Prefer to use argument names. + In Python, also the last argument is followed by comma. + It makes renaming and reordering easier. + Similarly applies to prints with long lists of values. + A TODO to update api crc file comments. Change-Id: I84729355edbec051298a9de1162107f88ff5737d Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2020-10-29tests: Add GSO enabled testsMartin Balaz9-25/+151
Change-Id: I409b060f64ae7c6787448ae519fd76d8384e9ffb Signed-off-by: Martin Balaz <martin.balaz@pantheon.tech>
2020-10-23CSIT-1597 NAT44 API: dynamic configJan Gelety2-1/+70
- cover API changes in VPP: https://gerrit.fd.io/r/c/vpp/+/29463 - update vpp stable to version 21.01-rc0~283-g5f4f2081c Change-Id: I079c10e4537448c3b078f22c3fe4ed266a5e2e2c Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-10-20FIX: Namespace deletionpmikus2-4/+13
+ Not sure who was doing code. + Set interface up should have namespace version Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I1103cddb9dd11e25a8ab0ce3f5126b2db9444749
2020-10-19FIX: disable sending IPv6 RA messages from VMsJuraj Linkeš5-19/+20
There were occasional Router Advertisement packets received in a Traffic Generator in VM testcases. Fix by adding config that disables sending IPv6 RA messages on interfaces in VM VPP config before enabling them. Also rename related keywords and change descriptions based on https://docs.fd.io/vpp/21.01/db/d4c/clicmd_src_vnet_ip6-nd.html#clicmd_ip6_nd Change-Id: I1c2a33337ac91f6039d287b4c2aac388e3a52383 Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
2020-10-19Tests: Remove GBPpmikus3-447/+0
- Specs - Tests - Library - TODO: PAL Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I8890940d56c7a9924d4a5f9365b6bb881610db14
2020-10-14vpp_device: fix shim hostnameJuraj Linkeš1-5/+4
Replace the hacky grep of /etc/resolv.conf with default docker gateway IP. Change-Id: Iec3a4658826f2ba871acb14d511e9c79a1273290 Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
2020-10-12Infra: Enable AMDpmikus1-0/+4
Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I3954157e91aafd370c3ac0843708903d19b84936
2020-10-07vpp_device: updates for 1n-tx2 testbedsJuraj Linkeš1-11/+7
One ThunderX2 9975 server (.69) was replaced with two ThunderX2 9980 (.70, .71) servers. Move the .69 server under ansible perf section in anticipation of repurposing it for that purpose. Update the ansible scripts with .70 and .71 config and rename port names in device.sh lib to reflect the NIC differences between .69 and .70 (and .71). Change-Id: I88b75648735243e5559175d3192ffcc8fc70071c Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
2020-09-12Test: Add ramp-up phase to nat44ed-udir testsJan Gelety2-3/+61
Change-Id: I3aa50ec1ef9b0445014daa31e767323060f4a03f Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-09-30Framework: Add possibility to send ramp-up trafficJan Gelety2-22/+43
Change-Id: Ie24184ca4ac2d6c7abc32f0f103e10bc402ad93b Signed-off-by: Jan Gelety <jgelety@cisco.com>