aboutsummaryrefslogtreecommitdiffstats
path: root/resources/libraries
AgeCommit message (Collapse)AuthorFilesLines
2020-09-28Constants: Lower Mellanox pps limitVratko Polak1-1/+7
The previous 60 Mpps stil leads to ~30% duration stretching. + Add comment on why 36 Mpps was chosen as the new limit. Change-Id: Ic11e8ece03939bdc8680cd7bc4122373583a2f17 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2020-09-25FIX: Workaround AVF interface down until VPP-1934pmikus1-1/+7
- Follow up https://jira.fd.io/browse/VPP-1934 Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: Id0a26c5f67f229480332530a8531401d954f4422
2020-09-24test: nat44det - add session number checkJan Gelety4-5/+70
- some tests need to reduce rate for ramp-up phase - some tests need to extend trail duration in ramp-up phase - removed 2n1l-10ge2p1x710-ethip4udp-nat44det-h1-p63-s63 suite as nat out ports are randomly selected from available port range so T-Rex stateless is not able to provide required out2in traffic Change-Id: I1145496610d202f81d911e68aa819844d7600918 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-09-23FIX: Race conditionpmikus2-0/+14
avf tests works, but vfio-pci tests are following, the interfaces must be in down state (ideally unbind, as vpp cannot pick them). Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I77af85ec4239059a5455ef68683ca129548bd7bd
2020-09-23FIX: Mellanox handlingpmikus1-2/+2
- From 2n-zn2 testing Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I9b1f0916f0f1d90a223918cfe48409d29f2ee773
2020-09-23Infra: Add 2n-xn2pmikus1-7/+10
Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I2ff6526b5209dabf70c6593f60162d9b8c147014
2020-09-23Framework: AVFpmikus1-0/+22
Fix 1/3: Explicitly put PF interface up (this patch) Fix 2/3: Done on TB Fix 3/3: VPP bug displaying VF up if underlying PF is not up Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I45d66986ec76e6e14eebaad6828ef72724c626ab
2020-09-22Framework: Heapsize configurationpmikus5-25/+36
- https://gerrit.fd.io/r/c/vpp/+/28829 - https://gerrit.fd.io/r/c/vpp/+/28896 - ip6 to be added later Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I7b03b8ace5c5c7582d4a2f66bfd788a3ec80a916
2020-09-21FIX: Unknown trigger filespmikus1-5/+5
Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I8d6108af943d729fecbcfe4867ea820a69b4eb1e
2020-09-11Add ipsec async mode performance test casesYulong Pei2-0/+27
In VPP 20.05, vpp added async crypto engine that support to use QAT hardware to do encryption and decryption, vnet/ipsec enabled async mode to use async crypto engine. Current async crypto engine also use dpdk_cryptodev as async handlers, in the future it may add other native QAT driver as async handlers. Note that async crypto engine is to support vnet/ipsec, it is different with current existing dpdk backend which itself has ESP implementation in plugins/dpdk/ipsec. Change-Id: I4e6eaa7ca1eddb8b1c45212de0684fb26907119b Signed-off-by: Yulong Pei <yulong.pei@intel.com>
2020-09-07VPP-DEV API COV: Add NAT44-ED testsJan Gelety2-1/+54
Jira: CSIT-1755 Change-Id: I34baa22a49f44da3fa80d91fa2f4132c982fe610 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-09-03Framework: Code aligmentspmikus7-30/+302
+ Unifying code structures - To easily plug another DUT + New PCI PassThrough templates + Improved perf stat on cores allocated in test. Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I325f17b977314f93cb91818feddfddf3e607eb8a
2020-09-03Framework: Bump DPDK 20.08pmikus6-99/+35
+ DPDK 20.08 + Migrate make -> meson + Fix all trending issues Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I31dcb22627c0f8d17ec63c5b138a2da958b006f4
2020-08-24T-Rex: 2.82, core pin, 8 workerspmikus1-2/+2
+ Bump T-Rex version. We need new features for ASTF test. + Apply core pining. Results in a more stable performance. + Tweak the number of T-Rex workers. + We need an even value to achieve ymmetric performance with pinning. + Value 8 was selected as a best compromise. This is a combination of 3 commits. This is the 1st commit message: T-Rex: 2.82 This is the commit message #2: Change Trex to CORE_MASK_PIN mode to improve performance https://trex-tgn.cisco.com/trex/doc/trex_stateless.html#_core_masking_per_interface Above link have below explaination, "When the profile is symmetric, performance can be improved by pinning half of the cores to port 0, and half of the cores to port 1, thus avoiding cache trashing and bouncing." The reason to change this is that to run CSIT with 100G NIC often failed with "TRex stateless runtime error timeout", it caused by Trex can not send enough traffic within the fixed duration. by change to CORE_MASK_PIN mode fix the issue. Not editing ASTF, as that supports different options. This is the commit message #3: Experiment: Vary number of TRex workers With CORE_MASK_PIN, we can get more predictable time distribution. Decided to use 8 workers, that gives good results both for high end (RDMA-core l2patch) and low end (vhost) tests. Change-Id: I5c61127799e0624464e960fcb980ad1c4058e744 Signed-off-by: pmikus <pmikus@cisco.com> Signed-off-by: Yulong Pei <yulong.pei@intel.com> Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2020-08-24Framework: Qemu alignmentspmikus2-17/+28
Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I2781e85f44acffb4f8d7f02326ba2ca668dad0c5
2020-08-08Fix: NAT44 deterministic moved to separate det44 pluginJan Gelety3-91/+184
- align CSIT code with VPP code changes for NAT44 deterministic (DET44) feature - align test names according to snat44ed tests - remove obsolete 3-node nat tests - remove 2n1l-10ge2p1x710-ethip4udp-snat44det-h1048576-p63-s66060288 tests (not enough memory for such high number of sessions) Change-Id: I9a22b99b4cfa56d18e9c7ef9c58296e202567d42 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-08-20Fix: Use new-style interface variablesVratko Polak2-6/+6
The old-style variables contain None in some places, mainly in SRv6 proxy tests. Change-Id: If3887a7dba051454c504b345a6a316d5d69d0139 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2020-08-20Framework: use 'stl' in trex stateless profile namesJan Gelety1-3/+2
Change-Id: I74641cc89d2f25d50b67d51bf2567082b420aabb Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-08-19Add Intel E810CQ 100G NIC configurationYulong Pei2-2/+7
for Intel E810CQ 100G NIC, kernel driver of PF is ice, kernel driver of VF is iavf, its VF hardware support VPP native avf driver. Signed-off-by: Yulong Pei <yulong.pei@intel.com> Change-Id: Ic8d86e5ee00057bbbcd09df619a38bd1371c8fd7
2020-08-07Perf: NAT44 endpoint-dependent mode - udp, part IJan Gelety11-235/+525
- continuation of https://gerrit.fd.io/r/c/csit/+/26898 as there was reached limit of changes (1000) Jira: CSIT-1711 - udp synthetic profiles w/o data packets - udp cps perf tests, phase I (no special "search cps" KW) Part I means that we are using MRR tests to collect traffic data until there is ready new CPS test type with corresponding algorithm. Change-Id: I0d30feb9ecf1d0bff937152656f8eb422f831378 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-08-18Framework: Qemu alignmentspmikus1-8/+21
Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I20098fca8fb513accef3edc9a72bfd3c56bf9be2
2020-08-18Framework: Alignmentspmikus1-2/+2
Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I1b535ea61ab68f6e37989ffc942979cdfd24f55e
2020-08-17Framework: Profiles loadpmikus4-140/+264
Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: Iab84aff31a23bb9d8e1165f5314004803fd8a501
2020-08-17Measure latency only in special casesVratko Polak2-7/+15
+ Measure latency in 90/50/10/0% PDR loads in ndrpdr tests. + Do not measure latency anywhere else. - Needs manual editing to re-enable in soak tests. Change-Id: I69fa11bfcf71012f683061c5effea52a1be91620 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2020-08-06Limit user triggers: no ORVratko Polak1-0/+7
To avoid runs such as: https://jenkins.fd.io/job/vpp-csit-verify-perf-master-3n-hsw/340/ Change-Id: I1b30d5f440ddf8ff32b11265b2ac2176f4b9a665 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2020-07-23T-Rex: Add advanced stateful modeJan Gelety5-178/+383
- provide base routines to run T-Rex in advanced stateful mode Change-Id: Ib0dc5f2919c370753335f6446860683dc4b12d93 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-07-31Framework: Perf stat capturingPeter Mikus4-10/+84
Change-Id: I3bbe1fe0073ddeead5219993675f24955e8c3dfd Signed-off-by: Peter Mikus <pmikus@cisco.com>
2020-07-30Introduce per DUT configurable statspmikus2-17/+68
- test/suite/global - binary logic is not working Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: Ia3d81cbf2c5f04d1093a0a408c84a9ffc6f3eef0
2020-07-28Soak: Avoid a possible deadlock.Vratko Polak1-3/+5
Change-Id: I31c2d7744b5cd3021132fb188480b8edec74986c Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2020-07-24NDRPDR: Allow smaller min_rate, 9001 ppsVratko Polak1-12/+16
+ Latency measurements need more than 9000 pps. - Previously 0% measurement used 9500 pps. Change-Id: Ic0841de096dfa8a61329f98aa1ba6d3f0ce60c66 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2020-07-23FIX: Log required cli_cmd not "cli_inband"Jan Gelety1-2/+2
Change-Id: If0975b1d54882390c5be418927e2961d0f4c8429 Signed-off-by: Jan Gelety <jgelety@cisco.com> Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2020-07-23perpatch: Echo MAKE_PARALLEL_* var before buildJuraj Linkeš1-1/+15
VPP uses MAKE_PARALLEL_FLAGS or MAKE_PARALLEL_JOBS to limit the number of cpus to use during build, so emit a line on stdout if it's used. Change-Id: I669398d474d172abb6c848a45f24f1bdd56990d8 Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
2020-07-16Remove remains of WRK testsTibor Frank7-277/+0
Change-Id: If61783fb717757c6189f06924412bd079e15a08f Signed-off-by: Tibor Frank <tifrank@cisco.com>
2020-07-13Soak: Do not allow negative lossVratko Polak2-2/+11
Change-Id: I6da359d25edc415e44263d3f85f166369e564987 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2020-07-13Soak: Fix worker exception passingVratko Polak1-2/+10
Change-Id: I636f020e97df1b37ac8b6a30af511eebe611b56f Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2020-07-13Soak: Fix failure conditionVratko Polak1-3/+3
Previously, number of directions was not taken into account. Also, ideally PLRsearch never reports value under the hard minimum, so successful results are now required to be more than 10% better. Change-Id: I8622726b97bd1da3e139c8044a2932837fc268b7 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2020-07-09Framework: Allow change of MRR settingspmikus1-24/+39
Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: Ie88f0df239725a4de62d727e1923cdb3ad040809
2020-06-30make graph node variant can be configured from gerrit triggerYulong Pei4-1/+33
for example, below will trigger VPP with default code path test in CSIT, "csit-2n-clx-perftest mrrAND64bANDnic_intel-xxv710ANDeth-l2bdbasemaclrnNOTdrv_avf" and below will trigger VPP with avx512 code path test in CSIT, "csit-2n-clx-perftest icl mrrAND64bANDnic_intel-xxv710ANDeth-l2bdbasemaclrnNOTdrv_avf" Change-Id: Id3abf932203ce00f34f8643c5bc4d5fc4d3e6efb Signed-off-by: Yulong Pei <yulong.pei@intel.com>
2020-06-23Revert "Tweak TRex cores and RDMA pps limit"Vratko Polak1-6/+2
This reverts commit 925c5bfcffb2bc6b833a8e64b7f3a06bbca52197. It was affecting 2005 performance, confusing comparisons. The revert includes the RDMA limit. Change-Id: I9c31b061ee59bc5cb14d623ac98a65763ef75f1c Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2020-06-11Update selection of report-iterative test setsTibor Frank1-1/+4
- Create the same directory structure for report-iterative as it is for report-coverage. - Move files from report-iterative directory to created sub-directories. - Rename the moved files to keep the convention defined in report-coverage. - Update the corresponding functionality in resources/libraries/bash/function/common.sh The patches: - https://gerrit.fd.io/r/c/csit/+/27486 - https://gerrit.fd.io/r/c/csit/+/27484 - https://gerrit.fd.io/r/c/csit/+/27485 must be updated. Change-Id: I1aaf22690e3df5abf56893bb1d2d380debc54ddd Signed-off-by: Tibor Frank <tifrank@cisco.com>
2020-06-10NAT44 EI testsMaros Mullner1-18/+46
Signed-off-by: Maros Mullner <maros.mullner@pantheon.tech> Change-Id: Ib5f58f60a1409ed139e2846793bf52fdc02a6571
2020-06-09Remove leading tc[nn] from test namesJuraj Linkeš3-21/+13
The test names are unique without it and the information doesn't add anything extra. Change-Id: Idc7d6d1d21c8c05691e1757227a0a3787406d370 Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
2020-06-03FIX: IP4 IP6 3n-onlypmikus2-3/+3
ARP not resolved as ARP plugin is not in use. Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I655d39794f99e32a2f3905154d78e83853356ccf
2020-06-03Fix DPDK build on armJuraj Linkeš1-0/+6
Directive #include <file> in GCC implementation searches for files in a standard list of system directories, which leads to a build error on Taishan arm machines: /tmp/openvpp-testing/dpdk/lib/librte_ethdev/rte_ethdev.h:4287:10: fatal error: rte_ethdev_core.h: No such file or directory #include <rte_ethdev_core.h> Fix this by replacing the directive with #include "file" which searches for files first in the directory containing the current file and other directories only after that. Change-Id: If283b81c992c001a2f980312cdd99053c3d703d9 Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
2020-05-27FIX: check if testpmd is aliveJan Gelety1-3/+5
Change-Id: I12f21a4a7ae7c8593c42fa8e6cc4d65e36d41270 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-05-28Remove hugepage dirs when killing dpdkJuraj Linkeš1-1/+1
There could be directories under /dev/hugepages/ so remove those as well. Change-Id: I8ecdde159b8e0049460d0bcdc8b1a2c85b1ed25f Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
2020-05-26FIX: do not fail when skipping patch for l3fwdJan Gelety2-3/+5
Change-Id: I1159fb29d43f61628922cdbd51313f710aa72f4a Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-05-26FIX: add dpdk mrr_weekly and report_iterative job specsJan Gelety1-4/+5
- split job specs to directories Change-Id: I9a71621216ab0bdf85d147ce03f473e7cbb0b266 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-05-26Add csit-vpp/dpdk-perf-report-coverage job and job specificationsJan Gelety1-0/+8
- note: currently dpdk report-coverge test sets are equal to dpdk report-iterative test sets Change-Id: Ib9a718bfea4b24842742f49ee2eca022aa8a08e5 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-05-18Add csit-vpp-perf-report-iterative jobJan Gelety1-0/+5
- job will be used to collect vpp performance iterative data for csit report Change-Id: I4cff5caa0a97d08b11f3eb9b72963deaf1b04c73 Signed-off-by: Jan Gelety <jgelety@cisco.com>