Age | Commit message (Collapse) | Author | Files | Lines |
|
Signed-off-by: Peter Mikus <pmikus@cisco.com>
Change-Id: I0e659937440e9ff7070f0d13b7a1db99f27cf2bb
|
|
Signed-off-by: Peter Mikus <pmikus@cisco.com>
Change-Id: I0cfc9d9fbb1a82a308231a5d2c0b12cb632c469b
|
|
Signed-off-by: Peter Mikus <pmikus@cisco.com>
Change-Id: Ic676d00bd7d3d5d8c244bfd0eb7b10bc74498505
|
|
The function get_pci_addr could check a different PCI_ADDR in case the
netdev device directory doesn't exit. Move the check so that it always
uses the proper PCI_ADDR and add a failure case when the netdev device
directory doesn't exist.
Change-Id: Ibadfea3fba34509cd3ea8f906ac5962c0f01dd17
Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
|
|
Change-Id: I82bc5cd69de82a2d6b6689cf3380f667ea905886
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
- UTI export breaks local execution
- disabling useless tox rules
Signed-off-by: Peter Mikus <pmikus@cisco.com>
Change-Id: I2f610b08f06f437e4482f291fa7b47cbb7b92984
|
|
Replace the hardcoded SPD inbound/outbound ranges with values derived
from test inputs.
Add the necessary routes now that the tunnel endpoints are not in the
same subnet. Also add ip neighbor entry on DUT2 for the same reason.
Also replace ipsec sa dump with show ipsec all in teardown of tests
where both SAs and SPDs are configured to improve troubleshooting.
Change-Id: I7d89a99fcf457a701c87bf6ac07364b62802677d
Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
|
|
Change-Id: Id3975dfcca0040b799f31dcd14789d8c90993b14
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
Part of fixing chain
Signed-off-by: Peter Mikus <pmikus@cisco.com>
Change-Id: Ie423ccf5a51751e605d906dd1214f5174bb364ac
|
|
Signed-off-by: Peter Mikus <pmikus@cisco.com>
Change-Id: Ia5a097797b54c2e71acdcc8d72706e5540536252
|
|
Part of fixing chain after early merge.
Signed-off-by: pmikus <pmikus@cisco.com>
Change-Id: I06e19def003575993bc3d97c0dc7fbedd3e5ff7a
|
|
Part of fixing chain after early merge.
Signed-off-by: pmikus <pmikus@cisco.com>
Change-Id: I983b3036a388656bbad91aba71cf14b503f875bd
|
|
Signed-off-by: xinfeng zhao <xinfengx.zhao@intel.com>
Change-Id: I1590d438216e4c886aae03f83364837153623dbc
|
|
Signed-off-by: pmikus <pmikus@cisco.com>
Change-Id: Ib52fab112d458decfecf39c77085bcd85f811eba
|
|
Signed-off-by: pmikus <pmikus@cisco.com>
Change-Id: Ic7f24767b60eef5ddb7cdf5f933d82930c625f5c
|
|
+ Model version 1.0.0.
- Only some result types are exported.
+ MRR, NDRPDR and SOAK.
- Other result types to be added later.
+ In contrast, all test types are detected.
+ Convert custom classes to JSON-serializable equivalents.
+ Sort dict keys before converting to JSON.
+ Override the order for some known keys.
+ Export sets as sorted arrays.
+ Convert to info content from serialized raw content.
+ Also export outputs for suite setups and teardowns.
+ Info files for setup/teardown exist only temporarily.
+ The data is merged into suite.info.json file.
+ This simplifies presentation of total suite duration.
+ Define model via JSON schema:
- Just test case, suite setup/teardown/suite to be added later.
- Just info, raw to be added later.
+ Proper descriptions.
+ Json is generated from yaml.
+ This is a convenience for maintainers.
+ The officially used schema is the .json one.
+ TODOs written into a separate .txt file.
+ Validate exported instance against the schema.
+ Include format checking.
+ Update CSIT requirements for validation dependencies.
+ This needs python-dateutil==2.8.2, only a patch bump.
+ Compute bandwidth also for soak tests.
+ This unifies with NDRPDR to simplify schema definition.
- PAL may need an update for parsing soak test message.
+ Include SSH log items, raw output only.
+ Generate all outputs in a single filesystem tree.
+ Move raw outputs into test_output_raw.tar.xz.
+ Rename existing tar with suites to generated_robot_files.tar.xz.
Change-Id: I69ff7b330ed1a14dc435fd0ef008e753c0d7f78c
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
+ Implementation stub so checker can check already.
+ Also add documentation stub for the implemented model.
+ Checker checks also for bumps in documentation version.
- Not comparing implementation and documentation version yet.
Change-Id: I4d19c00315a1c171de325c4494c28f5210635f32
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
When building documentation using sphinx we see ~1200 similar warnings [0]
[0] - https://s3-logs.fd.io/vex-yul-rot-jenkins-1/csit-verify-tox-master-ubuntu2004-x86_64/3289/doc_verify.log.gz
These warning are harmless and can be fixed later
Signed-off-by: Viliam Luc <vluc@cisco.com>
Change-Id: I1ac1099d38935971d47491dde905715345d3935c
|
|
Previous code changes updated code comments, but not docstring.
Change-Id: I5be3fd07620cc97c9088efceb72c2f68ab103915
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
+ Add ability to switch between hugepages.
Signed-off-by: pmikus <pmikus@cisco.com>
Change-Id: I84d8eae28ed414a32e5ba82e6c9ed10d7f0ef9cb
|
|
This helps to distinguish different symptoms for PAL failure alerting.
Change-Id: Idd8e8f4b427641fa055516bdf17715f6b967ca72
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
Previously, the FAIL message was not printed.
Change-Id: Id3fc6c126edd42b55cec73294696a0426a73d634
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
In rare cases, binding the whole /dev/vfio folder will result in
unusable VFs:
notice dpdk EAL: Cannot open /dev/vfio/151: Device or resource busy
[0], section 4.3.1. provides some clues as to what's going on and how to
avoid the failure. Mounting /dev/vfio reset the file descriptors of all
devices under /dev/vfio. Vfio-pci creates a device when an interface is
bound to it. The rare failure then occurs when /dev/vfio is mounted
while a process is using the file descriptors result in that process
using invalid file descriptors (or file descriptors belonging to a
different VF).
Fix the issue by binding i40e and ice VFs to vfio-pci before containers
are created and make sure that the VFs are not unbound later in testing.
Only bind DUT VFs since the TG uses the kernel driver.
[0]: https://connect.redhat.com/sites/default/files/2021-03/Cloud Native Network Function Requirements.pdf
Ticket: CSIT-1794
Change-Id: I83db91b29d16669fb034b141ad247f6f796fdf64
Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
|
|
Signed-off-by: pmikus <pmikus@cisco.com>
Change-Id: Ic6d440ffdf7e27c9e6ce65605178163652758f77
|
|
Signed-off-by: pmikus <pmikus@cisco.com>
Change-Id: Ieac8cd32009bebbd1a3324a81becfbf3abb814ab
|
|
Add 1, 10, 100 and 1000 SPD entries using IPv4 outbound flow cache
optimization.
Change-Id: I7abb65a82454c17ef754cb11386186610f0c27e8
Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
|
|
Signed-off-by: pmikus <pmikus@cisco.com>
Change-Id: I19c160e40e01bd7f69c08188f61d2bcbc3fd4bcb
(cherry picked from commit 8be983ad917cd47fa8da4256fa8ada14ecfcd425)
|
|
Change-Id: I75e836ce728fd333764f17d69813093cb947ef4f
Signed-off-by: Viliam Luc <vluc@cisco.com>
|
|
+ This makes a problem. It would be better to have ENUMS
in code as everywhere else
Signed-off-by: pmikus <pmikus@cisco.com>
Change-Id: I90f8e7c0177cb6a76eef5d4444f0ec22f57236c4
|
|
Signed-off-by: xizhanx <xix.zhang@intel.com>
Change-Id: Ic6ccc206632023297d35d0020397e8fd5706ea1c
|
|
+ Just few obvious one
Signed-off-by: pmikus <pmikus@cisco.com>
Change-Id: I9bbac293a56d6b2943bef03cb3b8943e967dae6b
|
|
The comms DDP package needs to be installed to support all flow protocols
Signed-off-by: xinfeng zhao <xinfengx.zhao@intel.com>
Change-Id: I6ab1bd8beb9edb8c9889a0ed9a999080ca3cef3d
|
|
Change-Id: I8679c819b7c6ecd9e680bdc6edeafd2124def0b5
Signed-off-by: Viliam Luc <vluc@cisco.com>
|
|
Usually, DICT__nodes is populated from reserved topology yaml.
But is some cases (doc generation, maybe pylint) there is no yaml.
The proper fix is to never execute any business logic
just when a module is imported.
This is just a quick workaround.
Ticket: CSIT-1793
Change-Id: I6d7250dc75d12baf120758ade8730af89431265a
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
- job-spec for trex tests modified
Change-Id: Id04d76648f30baacfa027b182a838d2f681afcec
Signed-off-by: Tibor Frank <tifrank@cisco.com>
|
|
It should be in transactions per second, so target rate (min rate).
Change-Id: I56a12d65466320fe5e4b2ee7d3b9946c9b3c414f
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
Signed-off-by: pmikus <pmikus@cisco.com>
Change-Id: Ic249493a39faa8f429ae4fa1de644d74d874151b
|
|
There are sporadic failures due to timeout.
An earlier edit changed how the timeout is applied
(now it is for the whole search, previously it was for final phase only)
so failures are not unexpected.
Increasing timeout value from 12 minutes to 20 minutes
(both for NDRPDR and for NDR part of RECONF)
as the frequency shows it will not prolong runs much.
The timeout is increased both in Robot call site
and in Python keyword default argument.
Change-Id: I3f07125ba9eeb90ce5819b1450044441b8b3977a
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
+ Make better error message.
Signed-off-by: pmikus <pmikus@cisco.com>
Change-Id: I2dbb9a50215bd6665c5c278653edd9324314e6b8
|
|
Signed-off-by: pmikus <pmikus@cisco.com>
Change-Id: Ib87e173daba3315c51794a12e22f7961a5709699
|
|
Signed-off-by: pmikus <pmikus@cisco.com>
Change-Id: I62deca750d4494427d2ea1916e0678c06dad7533
|
|
Master branch is no longer expected to work with such old VPP builds,
and CRC values were removed already anyway.
Change-Id: I707a61bc82d7d8998100fcd9fe78b90e7b074675
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
Previously, runtime rate was not modified,
so max rate was always used, even in ndrpdr with two stats trials.
Now, each call to "Send traffic at specified rate" keyword
sets the given rate as runtime rate.
Change-Id: I3eb41eeadd6b64d23056c67c23a25f9565bb0424
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
Change-Id: I911e121475221fbf5449ed49dc6236caf13742b0
Signed-off-by: Viliam Luc <vluc@cisco.com>
|
|
Based on latest common ancestor of master and stable/2106:
1372178e0e674143bfec14b17050d5e92e4fcf1a
Only ipsec_sad_entry_add_del_v3 needs non-trivial argument edits.
Change-Id: I813367292a830e5a1fac765e9f24057b6b0192ee
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
Change-Id: I9d028294deb1e31b6d185deb1c7523e0226a0ada
Signed-off-by: Viliam Luc <vluc@cisco.com>
|
|
Signed-off-by: pmikus <pmikus@cisco.com>
Change-Id: I82819c924012c966ba91fdf39ffba500ee0ce6b0
|
|
Signed-off-by: pmikus <pmikus@cisco.com>
Change-Id: I06d4012552eee918ae29e0bd789d3d316840ad4a
|
|
It uses different bootstrap than csit-vpp.
Just cherry-pick the edits from
https://gerrit.fd.io/r/c/csit/+/33513/15/resources/libraries/bash/entry/bootstrap_vpp_device.sh
+ Match just *device* when reading testplan.
+ Do not prepend MRR for vpp device jobs.
Change-Id: I13e171551ebc87af0ac3e3a1a1bcfae7cad8326c
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
Signed-off-by: pmikus <pmikus@cisco.com>
Change-Id: I80efb278cf824dd8b1d38bb3ff3df43366e7295a
|