aboutsummaryrefslogtreecommitdiffstats
path: root/tests/vpp/perf/crypto
AgeCommit message (Collapse)AuthorFilesLines
2023-06-21feat(infra): update 3n-alt cx6 iterative testsJuraj Linkeš2-0/+354
Add ipsec reassembly test cases to bring in line with 3n-icx. Add ipsec policy test cases with flow cache enabled for both inbound and outbound traffic. Remove GTPU hardware tests as the NIC doesn't support GTPU offload RX. Change-Id: I7b18914f983d5974b390f995ec638a64b9bbccbb Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
2023-05-24feat(reassembly): add few suites for ip reassemblyVratko Polak6-0/+1029
In tunneling scenarios, VPP needs to reassembly packet fragments before decapsulation. Conveniently, VPP also fragments the packets after encapsulation (at least for some encapsulation protocols) if they do not fit into MTU. So this change adds few suites, adapted from existing 3-node ones which additionally lower MTU on DUT1-DUT2 link. The intended packet size is 1518B. 64B packets will fit, and most of IMIX packets will also fit without fragmentation. VPP refuses to reassembly 9000B packets as they have too many fragments. + Add a keyword so suites need only one additional line of code. + Add new test tag REASSEMBLY for the added suites. + Tell autogen the one soak test case for reaseembly should be 1518B. - It is possible to increase fragment limit for 9000B, not done yet. - Ipsec policy suites are added but they should not be used. - VPP does fragmentation twice (before and after encapsulation). - VPP does not perform reassembly (only last fragment is decrypted). - TRex does not realize the packet from VPP is only a fragment. - The result is false pass with unfairly good performance. + Suites still included, to simplify verifying VPP fixes for the above. Change-Id: If33c60d767fea161d9e4ffabb8ded3d81c8f39ed Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2023-04-20Add 100k tunnels ipsec policy mode with fastpath enabled test suiteYulong Pei1-0/+178
Signed-off-by: xinfeng zhao <xinfengx.zhao@intel.com> Signed-off-by: Yulong Pei <yulong.pei@intel.com> Change-Id: I3708253adf4c7421ff48eee6aefb735b39726359
2023-04-03Enable IPsec policy fast path inboundYulong Pei3-3/+6
This will greatly improve the performance of IPsec policy cases Signed-off-by: xinfeng zhao <xinfengx.zhao@intel.com> Signed-off-by: Yulong Pei <yulong.pei@intel.com> Change-Id: Ib42b5650791be7fcc8649873eaf12616aeba5aec
2023-01-19Add 40k tunnels ipsec policy mode with fastpath enabled test suiteYulong Pei3-6/+182
In order to compare performance number with existed routing based ipip interface mode 40k tunnels ipsec test. Signed-off-by: xinfeng zhao <xinfengx.zhao@intel.com> Signed-off-by: Yulong Pei <yulong.pei@intel.com> Change-Id: I94816a8c18f08b539114d6ca9d4e1218a2b6ea5f
2022-10-03Add 10k tunnels IPSec policy mode test suitesYulong Pei4-0/+696
Also add 10k tunnels IPSec policy mode test with spd fast path enabled. spd fast path is to reduce policy adding time, refer to patchset [1] & [2] for details. [1] https://gerrit.fd.io/r/c/vpp/+/36095 [2] https://gerrit.fd.io/r/c/vpp/+/36097 Signed-off-by: xinfeng zhao <xinfengx.zhao@intel.com> Signed-off-by: yulong pei <yulong.pei@intel.com> Change-Id: I211b38a60d273c46e68a5b5f712090037977c6e6
2022-09-30Add VPP wireguard async mode test suiteYulong Pei28-61/+61
Add VPP wireguard async mode test suite to use QAT device for crypto. Also change keyword ipsechw to cryptohw in suite_setup.robot since currently crypto device is not only used by IPSec. Signed-off-by: Yulong Pei <yulong.pei@intel.com> Signed-off-by: xinfeng zhao <xinfengx.zhao@intel.com> Change-Id: Ibdadb3b09c04b7181415ffd4a248abddc6289075
2022-06-17Add ipsec policy test suites with flow director or rss acceleratedYulong Pei3-0/+535
The test scenario is about two private networks which communication was protected by ipsec. The test suites are to show performance impovement about ipsec esp flow lookup that offloaded by NIC flow director and rss. Verified on 3n-clx and Intel E810 NIC environment, with 64B ipsec packet flow, performance improved ~31% with 1C2T, ~110% with 2C4T, ~250% with 4C8T. Signed-off-by: xinfeng zhao <xinfengx.zhao@intel.com> Signed-off-by: Yulong Pei <yulong.pei@intel.com> Change-Id: I30aec8c5115e5a6fbef88c11d1bef2624029d1b9
2022-01-17fix(IPsec): fix policy testsJuraj Linkeš28-58/+58
Replace the hardcoded SPD inbound/outbound ranges with values derived from test inputs. Add the necessary routes now that the tunnel endpoints are not in the same subnet. Also add ip neighbor entry on DUT2 for the same reason. Also replace ipsec sa dump with show ipsec all in teardown of tests where both SAs and SPDs are configured to improve troubleshooting. Change-Id: I7d89a99fcf457a701c87bf6ac07364b62802677d Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
2021-12-22add 2-node ipsec hwasync casesxinfeng zhao11-0/+1837
Signed-off-by: xinfeng zhao <xinfengx.zhao@intel.com> Change-Id: I1590d438216e4c886aae03f83364837153623dbc
2021-12-15docs: small update structure fixViliam Luc4-15/+12
Signed-off-by: Viliam Luc <vluc@cisco.com> Change-Id: Ib0a853f7bd8cdbb0dee747e4f601bc4e54d006e9
2021-12-13doc: fixing documentation structureViliam Luc109-2603/+3209
When building documentation using sphinx we see ~1200 similar warnings [0] [0] - https://s3-logs.fd.io/vex-yul-rot-jenkins-1/csit-verify-tox-master-ubuntu2004-x86_64/3289/doc_verify.log.gz These warning are harmless and can be fixed later Signed-off-by: Viliam Luc <vluc@cisco.com> Change-Id: I1ac1099d38935971d47491dde905715345d3935c
2021-11-03Re-adressing ipsec int tests to fit deployment in AWSMaros Mullner56-280/+280
Signed-off-by: Maros Mullner <maros.mullner@pantheon.tech> Change-Id: I83b00d56a50d98c36547621cb2f41cb3b2f35741
2021-11-03perf: remove depracted ipsec scale reconf test suitesMaciek Konstantynowicz30-5075/+0
Remaining ipsec reconf test suites for 40 tunnels include: - int-aes128cbc-hmac512sha - int-aes256gcm Change-Id: I9c5f549368595bb0cbd0d7e9918b7695184d31c4 Signed-off-by: Maciek Konstantynowicz <mkonstan@cisco.com>
2021-11-02crypto: remove deprecated ipsec scale perf test suitesMaciek Konstantynowicz146-23984/+0
Remove following test suites: - ipsec tests - ethip4ipsectptlispgpe. - policy-aes128gcm. - policy-aes128cbc-hmac256sha. - policy-aes128cbc-hmac512sha. - int-aes128cbc-hmac256sha. - scale of - 400tnlsw. - 5000tnlsw. - 20000tnlsw. - 60000tnlsw. Change-Id: Ib4915213f6c440c70f9b17cbaac834245e51bd85 Signed-off-by: Maciek Konstantynowicz <mkonstan@cisco.com>
2021-10-25IPsec: add nth SPD entry outbound flow cache TCsJuraj Linkeš8-0/+1200
Add 1, 10, 100 and 1000 SPD entries using IPv4 outbound flow cache optimization. Change-Id: I7abb65a82454c17ef754cb11386186610f0c27e8 Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
2021-07-28IPsec: add nth matching SPD entry outbound TCsJuraj Linkeš8-0/+1176
Add testcases with plain ipv4 forwarding with 1, 10, 100 and 1000 SPD entries on outbound traffic in both directions both directions. Only match the last SPD entry and process others before the matching entry. Add testcases only without flow cache optimization. Refactor the Python functions that add SPD entries: - Unify the args in functions that add one and multiple entries. - For multiple entries, add the ability to pass an object that will handle how values in each iteration (i.e. for each entry) are modified. Change-Id: I061922eec6acc75a4e115202c07e72d89bf1f4d3 Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
2021-06-17Core: Rework CPU allocationpmikus32-96/+96
Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I6826add7b3032041632c3952c45a3c64409400b0
2021-05-26Perf: Add perfmon_plugin for telemetrypmikus270-375/+644
Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I710af90aa5474381a82095c8a11ecf6c01c2483b
2021-04-01IPsec: add 4, 40 and 400 tunnel policy testsJuraj Linkeš24-0/+3852
Add more granularity test policy tests. Mirror the number of tunnels in other IPsec tests under 1000 tunnels. Change-Id: I9bde7447a5d809bab05db132bf6cb524e97e19b3 Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
2021-03-31IPsec: add 2n crypto policy udir perf testsJuraj Linkeš8-0/+1276
Add 2n1l udir 1 and 1000 tunnel sw policy IPsec tests to mirror the existing 3n tests. Add static ip neighbor mac entries which can't be retrieved in 2node setups. Change-Id: I13dd557cbeed7f907fa9b4c21e4e245d48916513 Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
2021-03-02Fix: Async scheduler tests are not hwVratko Polak12-12/+12
Suite name part is correct: swasync. This fixes the tag, from IPSECHW to IPSECSW. Change-Id: I13a5201dade7edf180d315416c82c15d69c1bfce Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2021-02-26IPsec: add 2n crypto udir perf testsJuraj Linkeš96-0/+15736
Add unidirectional 2n crypto tests. Only one direction can be tested on a 2 node topology, since we can't use the same interface for both encrypted and unencrypted traffic. Add the following tests: * {n}tnlsw-ip4base-int ndrpdr tests * {n}tnlsw-1atnl-ip4base-int reconf tests * {n}tnlswasync-scheduler-ip4base-int ndrpdr tests Where n is the number of tunnels: 1, 4, 40, 400, 1000, 5000, 10000, 20000, 40000, 60000 for the first two 1, 2, 4, 8 for the async scheduler tests All of these with the following ecryption-auth algorithms: aes128gcm aes256gcm aes128cbc-hmac256sha aes128cbc-hmac512sha Also add the corresponding trex profiles: trex-stl-2n-ethip4-ip4dst{n}-udir.py Where n is the number of tunnels listed above. The profiles are shared among the tests. Change-Id: I22bb46e6ad59801581a78aa19310bee8a5293e56 Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
2021-02-19Add test suites for crypto sw scheduler engineYulong Pei16-0/+2704
This patch is to add test suites for vpp plugin crypto_sw_scheduler, IPsec sync mode is to do crypto and packet forward work in same worker cores, crypto_sw_scheduler can schedule crypto work to other async crypto cores to improve whole crypto processing capability. This test suites configure fixed 1 rx queues per port, then measure IPsec performance with 1, 2, 3 crypto cores. This patchset include 1, 2, 4, 8 ipsec tunnels test cases. +Vratko help to change to count total physical cores instead of previous only count crypto cores in test cases. Change-Id: I0e67182e3d13273890a23703d838101900e25126 Signed-off-by: Yulong Pei <yulong.pei@intel.com> Signed-off-by: Vratko Polak <vrpolak@cisco.com> Signed-off-by: pmikus <pmikus@cisco.com>
2021-01-21Reconf: Fix bidir/unidir mismatchVratko Polak40-120/+80
Results if NDR search is in TPS (so unidir) since https://gerrit.fd.io/r/c/csit/+/28208 The bug was causing all reconf tests report zero loss, as they used half of NDR load during reconfiguration. + Small improvements to descriptions of other traffic keywords. Change-Id: Ib9af5861cc09e698eb762feb3f0a019571d17962 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2020-12-16API: deprecated IPSEC APIsJan Gelety124-124/+124
Jira: CSIT-1597 + add ipsec_sa tear down action Change-Id: I4d1e6f26c14e61e8ddc6f29fbf5528a034c84eb0 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-11-26Re-enable 9000B tests for ipsecVratko Polak125-0/+1500
Ticket: CSIT-1771 VPP-1207 VPP-1675 Change-Id: I8ba2d62054361e72b833943327434ea071e7e568 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2020-09-11Add ipsec async mode performance test casesYulong Pei20-0/+3018
In VPP 20.05, vpp added async crypto engine that support to use QAT hardware to do encryption and decryption, vnet/ipsec enabled async mode to use async crypto engine. Current async crypto engine also use dpdk_cryptodev as async handlers, in the future it may add other native QAT driver as async handlers. Note that async crypto engine is to support vnet/ipsec, it is different with current existing dpdk backend which itself has ESP implementation in plugins/dpdk/ipsec. Change-Id: I4e6eaa7ca1eddb8b1c45212de0684fb26907119b Signed-off-by: Yulong Pei <yulong.pei@intel.com>
2020-08-20Framework: use 'stl' in trex stateless profile namesJan Gelety105-105/+105
Change-Id: I74641cc89d2f25d50b67d51bf2567082b420aabb Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-07-23T-Rex: Add advanced stateful modeJan Gelety40-40/+40
- provide base routines to run T-Rex in advanced stateful mode Change-Id: Ib0dc5f2919c370753335f6446860683dc4b12d93 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-06-09Remove leading tc[nn] from test namesJuraj Linkeš105-945/+945
The test names are unique without it and the information doesn't add anything extra. Change-Id: Idc7d6d1d21c8c05691e1757227a0a3787406d370 Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
2020-04-06Improve pf layerPeter Mikus105-377/+587
+ Merge single/double link + Introduce _pf{n}[0] variables so we can access physical function same way as virtual function + Cleanup code by moving complex logic to python + Prepare code for multiple vf functions Signed-off-by: Peter Mikus <pmikus@cisco.com> Change-Id: Ic2e74a38bfa146441357de8f0916aeb638941c49
2020-03-10Make RXQs/TXQs configurablePeter Mikus105-0/+315
Change-Id: Ib30bc4697fcba93a6723ee492a59a0523425f623 Signed-off-by: Peter Mikus <pmikus@cisco.com>
2020-02-25FIX: check if t-rex is running at test setup of all perf testsJan Gelety105-105/+105
Change-Id: I9af632035a1415666b2470c62a41d1b6acbf33c8 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-02-04Ipsec: Use new plugin name in reconf testsVratko Polak40-40/+40
This edit is not suitable for rls2001. Change-Id: I18ea22346d5996e78034f35d74a87c125010a146 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2020-02-04Add more reconf tests, for IPsecVratko Polak41-1/+6101
- Not adding nf_density tests. - Not adding hardware ipsec tests. - Not adding -policy- tests. - Using old crypto_ia32_plugin.so plugin name. + Suitable for cherry-picking to rls2001. Change-Id: Ibf44d6d91e2afa2320637ecd9eb69d5d5dc364aa Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2020-01-29IPSEC: Change plugin namingPeter Mikus65-65/+65
https://gerrit.fd.io/r/c/vpp/+/24574 Signed-off-by: Peter Mikus <pmikus@cisco.com> Change-Id: Ic2b7c925ceba1e16de87c64003ecceeea69c681c
2020-01-28Ipsec: Unify first line of Local Template docVratko Polak62-94/+90
Seeing differences when diff-ing between suites is distracting. + Bump copyright year, even for files with no change. Change-Id: Iaca79647821dd8233bdbe6b0ac8b14fdb04060a8 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2020-01-28Fix two auth_alg valuesVratko Polak2-2/+2
Change-Id: I0e85fc958779df3d5dbacf1ad1e3898268a832ec Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2020-01-28Update overheads for IPsec CBC testsVratko Polak32-64/+64
Updated to the values as seen in packet trace. Even if VPP creates wrongly sized packets (compared to RFCs), the overhead should correspond to the actual packet size present, in order to correctly prevent linerate on DUT-DUT link. The new overhead values are 62 (256SHA) and 78 (512SHA). The GCM value is already correct, at 54 bytes, so density tests are ok. - The lispgpe test is not updated, as it currently fails. We will update overhead there in (or after) 24578. Change-Id: I5cc6920205f37ddc80e76804fabd90b67174addf Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2020-01-10Support suite tags in autogenVratko Polak65-0/+65
+ Include a script to add suite tags to many suites at once. + Add suite tags also to device tests (not covered by autogen). Change-Id: I514ee6178e22999b43460028fe2696738b012f04 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2020-01-10Autogen: Generate also NIC drivers.Vratko Polak1-1/+1
+ Disallowed -avf- (or -rdma-) as "template" suites. + GBP suite switched to DPDK driver in repo. + Each NIC has its own list of supported drivers, in Constants. + Updated tag expressions for daily jobs: + Feature, ipsec, memif, scale, srv6, tunnels, vhost and vts are tested only with vfio-pci. + Other (base, dot1q, dot1ad) tested with all drivers. + Setup actions currently depend on driver, generated. - The performance_rdma action is trivial for now. - Several tests fail, to be fixed later, e.g. by performance_rdma. + Reconf tests are also supported. + Added DRV_VFIO_PCI tags missing, mainly in density tests. - Vhost suites (density, reconf) are failing, but suites look good. - TCP suites do not support NIC drivers yet. - DPDK obviously not supported. + Use Python 3 in regenerate scripts. + Fix typos binded => bound. + File open modes set either u"rt" or u"wt" everywhere. + Remove a trailing space in an environment variable name. Change-Id: I290470675dc5c9e88b2eaa5ab6285ecd9ed7827a Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2019-11-28Python3: resources and librariesJan Gelety66-653/+653
Change-Id: I1392c06b1d64f62b141d24c0d42a8e36913b15e2 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2019-10-30FIX: IPSecHWPeter Mikus8-16/+0
- IPsec proto is not for GCM Signed-off-by: Peter Mikus <pmikus@cisco.com> Change-Id: If6a9721574a72dacb4486c837100e4f2ed2bab19
2019-10-25Introduce pre-initialize driver layerPeter Mikus65-364/+464
+ This will help unify driver base differences between TCs. + Decrease amount of logic needed for suite generator. Signed-off-by: Peter Mikus <pmikus@cisco.com> Change-Id: I1e84ba361dc1e829f0612c58a61096e2633ce0c5
2019-10-19Tests: Introduce driver layerPeter Mikus65-55/+184
+ Small bugfixes in various suites Signed-off-by: Peter Mikus <pmikus@cisco.com> Change-Id: I051af0a6da7340fe3f617400370c3846ca5241ab
2019-09-17Update CRC list and support 21997/7Vratko Polak1-0/+6
- Attempt to repair IPsec LispGpe perf suite. + Collection name to reflect the current stable vpp. + Add messages found in CSIT L1 keywords. - Uncommented (instead of deleted) untestable messages. Reasons: - Honeycomb. - Messages used by unused keywords. + Listed reasons. Honeycomb not mentioned if both reasons apply. + Delete CRC items for commands not found in keywords anymore. + Add CRCs from .json.api files (as teardown is hard to execute). + Define and restore alphabetical order. + Add hints to find used API commands (not entirely reliable). + Move used commands to "cmd = " form so hints find them. + Argument to run_cli_command changed from "cmd" to "cli_cmd". + Except also struct.error where IOError is excepted. Change-Id: I61058dbe1e33296908aabd0c13433bb16cfa6adf Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2019-08-27- Removed 9000B test cases from ipsec test suites.Ludovit Mikula65-780/+0
- Added new traffic profiles. Signed-off-by: Ludovit Mikula <ludovit.mikula@pantheon.tech> Change-Id: Ie06b7a1cf4d9df403d098b7a495219fd95e5869e
2019-08-23Update CRC list commentsVratko Polak16-16/+16
+ Add testcases and tag expressions for perf occurrences. + Add TNL_1 tag for single tunnel IPsec suites. - Some CRCs were missing before, but form a pair with a listed CRC. - Probably the other half of the pair is not used. - Will be fixed in subsequent Change. Change-Id: I5754210755c13c41226b71045813714a65a1cdf3 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2019-07-26Move: 100tnl tests to 400tnlPeter Mikus4-56/+56
- Just bcause they wanted. Change-Id: I46a83924d61e9191bb02cf9dcfb761156686d545 Signed-off-by: Peter Mikus <pmikus@cisco.com>