aboutsummaryrefslogtreecommitdiffstats
path: root/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-ndrpdr.robot
AgeCommit message (Collapse)AuthorFilesLines
2021-05-26Perf: Add perfmon_plugin for telemetrypmikus1-2/+2
Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I710af90aa5474381a82095c8a11ecf6c01c2483b
2020-10-29Support existing test types with ASTFVratko Polak1-1/+1
+ Add UDP_CPS, TCP_CPS, UDP_PPS and TCP_PPS suites. + Update existing cps traffic profiles. + Add missing traffic profiles. + UDP: + Single burst of 32 packets was confirmed as safe enough for TRex. + Maybe 64 could work, but not enough testing for that. + Multiple bursts have lead to reduced TRex performance, as overlaping bursts (from different client instances) tend to fill up the buffers. + TCP: + Data size set to 11111 bytes, completely arbitrarily. + Results look reasonable, so I have kept that. - MSS not set at all - No tested support for frame size other than 64B. - Frame size does not even factor into TCP profiles. + So other frame sizes are skipped in autogen. + Update tags in related suites. - HOSTS_{n} and SRC_USER_{n} should be unified. - Questionable clarification on difference between IP4BASE and SCALE. + Add NAT state resetters to tests that need them. + Resetter is called (if set) before each measurement. + If ramp-up is detected, resetter is not set. + Rename "mult" argument to "multiplier". + Abstracted from packets to transactions. + Transaction corresponds to profile. + TRex multiplier argument sets target rate in transactions per second. + The familiar STL traffic: + Bidirectional is considered to be 2 packets per transaction. + Unidirectional is considered to be 1 packet per transaction. + The newer ASTF traffic: + 4 subtypes, each has different number of packets per transaction. + For max rate computation: + Packets in the more numerous direction are considered. + Rely on TRex reported traffic duration for ASTF: + Use the server side value. - Client side value is higher by an overhead. - TRex is not sending traffic during that time. + Remove delays from traffic profiles. - Those delays would increase the reprted traffic time. + Support for scale lmited trials. + Only for ASTF profiles, each ASTF profile has limited scale. + Scale defined in suite variables. + For TRex to send all transactions provided duration value is ignored. + The appropriate value is computed in TrafficGenerator. + An ad-hoc time constant is added to match the TRex client side time overhead. + The profile driver receives the computed duration. + Measurement for PLRsearch add a sleep if the computed duration is smaller. + Alternative argument for search algos if scale is limited. + Both need higher timeout to accomodate big scales. + MLRsearch can afford fewer phases. + Added a parameter to optionally shorten the duration. + Use short duration for runtime stats trial and failure stats trial. + Use very large keepalive values in udp profiles to avoid ka packets. + No polling in ASTF profile driver. - Polling could eliminate the time overhead value. + But polling proved to introduce some loss, affecting the results. + Handle duration stretching in ASTF by stopping traffic. + The stop has several steps so that: + The traffic is really stopped entirely. + Late packets do not count (maybe as errors). + Stats are preserved to read for results (and cleared afterwards). + Several quantities added to ReceiveRateMeasurement: + Original target duration is preserved (algos need that). + Input estimate (tps) for early search iterations. + Output estimate (maybe pps) for MRR output. + Strict result (unsent counts as loss) for NDR. + Use L2 counters (opackets, ipackets) where possible. - TRex has trouble processing packets for the L7 ones at high loads. + Remove warmup from profile drivers and keywords. + Suites should call "Send ramp-up traffic" explicitly if needed. + Added parsing for few more counters. + Both to use in formulas or just for debug purposes. - Only 64B cases in autogen, framesize support to be added later. + Latency streams during search can be enabled via PERF_USE_LATENCY env var. + MLRsearch improvments: + Rename argument names to min_rate and max_rate. + Use relative receive rate in initial phase. + PLRsearch improvements: + Careful computation when output (pps) does not match input (tps). + Use geometric distribution (instead of Poisson). + Helps agains math errors. + This should improve estimate stability. - But in practice big losses still lead to significant jumps. + Traffic generator improvements: + send_traffic_on_tg now calls the full set_rate_provider_defaults. + _send_traffic_on_tg_internal for the logic without provider defaults. + As the internal function is re-used by measure() without affecting defaults. + Move _parse_traffic_results just before get_measurement_result. + As the latter uses fields set bu the former, it is now easier to read. + Multiple sources for approximate duration. + Tried from more precise to more available. + Includes logic for _pps tests (added in later change). + Move explicit type conversions to earlier occurences. + Profile driver output field uses semicolons to simplify parsing. + Performance Robot lib file split to several smaller ones. + performance_actions.robot: + Hosts Additional Statistics Action For * keywords. + performance_display.robot: + Hosts keyword for displaying and verifying results. + Change test message to use the correct unit (pps or cps). + performance_limits.robot renamed to performance_vars.robot + Added many keywords, mostly for accessing test variables. + Moved variables for Policer into a new keyword there. + Some keywords need sophisticated logic. - Other are basically Get Variable Value. + But in future more logic can be added, without editing callers. + Documentation for the new keywords acts as a documentation for test variables. + performance_utils.robot has the rest. + Eliminated arguments if the value is in test variable. + Small improvements to documentation. - Still not enough cleanup with respect to arguments and test variables. + Keywords are sorted alphabetically now in each one. + Suites: + Unified variables table: + No colons in comments. + ${n_hosts}, ${n_ports} and use them instead hardcoded numbers. + Add -cps to existing cps suite names. + Remove "trial data overwrite". + Compute max rate as in STL suites. + Each NAT suite has ip4base suite to compare results to. - Those act as indirect TRex calibration. - VPP does not lose packets in those. + Latency in ASTF suites is disabled hard. - As we do not support latency in ASTF profiles yet. + Unidirectional tests governed by suite variable, not an argument. + Write long argument lists vertically. + Prefer to use argument names. + In Python, also the last argument is followed by comma. + It makes renaming and reordering easier. + Similarly applies to prints with long lists of values. + A TODO to update api crc file comments. Change-Id: I84729355edbec051298a9de1162107f88ff5737d Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2020-08-20Framework: use 'stl' in trex stateless profile namesJan Gelety1-1/+1
Change-Id: I74641cc89d2f25d50b67d51bf2567082b420aabb Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-07-23T-Rex: Add advanced stateful modeJan Gelety1-1/+1
- provide base routines to run T-Rex in advanced stateful mode Change-Id: Ib0dc5f2919c370753335f6446860683dc4b12d93 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-06-09Remove leading tc[nn] from test namesJuraj Linkeš1-12/+12
The test names are unique without it and the information doesn't add anything extra. Change-Id: Idc7d6d1d21c8c05691e1757227a0a3787406d370 Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
2020-04-06Improve pf layerPeter Mikus1-1/+3
+ Merge single/double link + Introduce _pf{n}[0] variables so we can access physical function same way as virtual function + Cleanup code by moving complex logic to python + Prepare code for multiple vf functions Signed-off-by: Peter Mikus <pmikus@cisco.com> Change-Id: Ic2e74a38bfa146441357de8f0916aeb638941c49
2020-03-10Make RXQs/TXQs configurablePeter Mikus1-0/+3
Change-Id: Ib30bc4697fcba93a6723ee492a59a0523425f623 Signed-off-by: Peter Mikus <pmikus@cisco.com>
2020-02-25FIX: check if t-rex is running at test setup of all perf testsJan Gelety1-2/+2
Change-Id: I9af632035a1415666b2470c62a41d1b6acbf33c8 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-01-10Support suite tags in autogenVratko Polak1-0/+1
+ Include a script to add suite tags to many suites at once. + Add suite tags also to device tests (not covered by autogen). Change-Id: I514ee6178e22999b43460028fe2696738b012f04 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2019-11-28Python3: resources and librariesJan Gelety1-9/+9
Change-Id: I1392c06b1d64f62b141d24c0d42a8e36913b15e2 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2019-10-25Introduce pre-initialize driver layerPeter Mikus1-5/+7
+ This will help unify driver base differences between TCs. + Decrease amount of logic needed for suite generator. Signed-off-by: Peter Mikus <pmikus@cisco.com> Change-Id: I1e84ba361dc1e829f0612c58a61096e2633ce0c5
2019-10-19Tests: Introduce driver layerPeter Mikus1-1/+3
+ Small bugfixes in various suites Signed-off-by: Peter Mikus <pmikus@cisco.com> Change-Id: I051af0a6da7340fe3f617400370c3846ca5241ab
2019-06-25Align suite/test teardown/setupPeter Mikus1-6/+6
+ Phase II - aligning FUNC/PERF setup. + 2n/3n compatibility of suite setup. + Same structure of testcase for DEV/PERF. + DEVICE tests are now running VPP startup config in same way as PERF. + DEVICE is using COREKEEPER! - DEVICE tests are running topology compute twice for backward compatibility. TODO to remove. - Still phase III needed to align TAGS, LIBRARIES and remove OLD setup phase. Change-Id: Ib6e1b0ebf4abebf3cbe73b4fda5cac953c2a7270 Signed-off-by: Peter Mikus <pmikus@cisco.com>
2019-06-21Align suite/test teardown/setupPeter Mikus1-2/+2
+ Phase I - aligning FUNC/PERF Change-Id: I46b1e43687ddb29f5ed3c6335fe1baf21ec02822 Signed-off-by: Peter Mikus <pmikus@cisco.com>
2019-04-08Upgrade autogen to NICs and search typesVratko Polak1-31/+27
+ All perf suites updated, as autogen change is backward incompatible. + Only x710 -ndrpdr suites remain in git repository. + Removed retry feature of run_tests. + Renamed topology_type and traffic_type to traffic_profile. + Renamed framesize to frame_size; nic_model to nic_name. + Reordered Variables table to start with nic_name and overhead. + Fixed wrong overhead value in some cbc-sha1 suites. + Fixed some suite tags. ++ Introduced tags to distinguish suites, such as IPSECINT. + Bound crypto hardware to NIC name. + Implemented NIC limit hiding. + Also search and teardown related arguments are now hidden. + Main measurement keywords updated to new arg handling. + Max rate related keywords moved to performance_limits.robot + Teardowns unified. + Generated tests are archived. ++ Generated directory is .gitignore-d. + Regenerator raises an exception on seeing non-compatible suite. ++ Relatively helpful message should be seen in exception. + Suite and template Documentation has generated parts. +- With short NIC names only. + Autogen checker also upgraded. + Tag expressions replaced with long files to ensure analogous tests. Change-Id: I60e9a999187e7da1f60d0eb4fb02afa14682aa46 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2018-08-28Create ip4-feature perf tests for 2-node topologyJan Gelety1-1/+1
- ACL tests - NAT44 tests - iPoliceMarker tests Jira: CSIT-1175, CSIT-1154 Change-Id: Ife7e7df50f7c1c8033bacdb7512e78be6bcdf4eb Signed-off-by: Jan Gelety <jgelety@cisco.com>
2018-07-24CSIT-1097: Migrate ip4 to NDRPDR and edit MRRVratko Polak1-50/+48
Change-Id: I9e3b2973c14f818247658a2ae34456c9fc2bae4e Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2018-07-16Add L2xc/L2bd/Ip4/Ip6 2-node tests for x710Peter Mikus1-0/+132
- CSIT-1161 Add 2-node L2XC tests - CSIT-1160 Add 2-node L2BD tests - CSIT-1157 Add 2-node IP4 tests - CSIT-1153 Add 2-node IP6 KW - CSIT-1158 Add 2-node IP6 tests Change-Id: I7c8fed7018bb355c0de73f6a8bc3a8ec80366972 Signed-off-by: Peter Mikus <pmikus@cisco.com>