aboutsummaryrefslogtreecommitdiffstats
path: root/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h4096-p63-s258048-udir-ndrpdr.robot
AgeCommit message (Collapse)AuthorFilesLines
2021-12-13doc: fixing documentation structureViliam Luc1-20/+25
When building documentation using sphinx we see ~1200 similar warnings [0] [0] - https://s3-logs.fd.io/vex-yul-rot-jenkins-1/csit-verify-tox-master-ubuntu2004-x86_64/3289/doc_verify.log.gz These warning are harmless and can be fixed later Signed-off-by: Viliam Luc <vluc@cisco.com> Change-Id: I1ac1099d38935971d47491dde905715345d3935c
2021-09-17Fix in_mask values in nat44 udir suitesVratko Polak1-1/+1
New IPUtil.Vpp_Route_Add implementation detects wrong values, as it refuses start addresses with host bits set. Fixed by copying in_mask values from nearby ASTF suites. Change-Id: I768c023bd004ce97b74199d70e5768c5e948d429 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2021-05-26Perf: Add perfmon_plugin for telemetrypmikus1-2/+2
Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I710af90aa5474381a82095c8a11ecf6c01c2483b
2020-10-29Support existing test types with ASTFVratko Polak1-4/+4
+ Add UDP_CPS, TCP_CPS, UDP_PPS and TCP_PPS suites. + Update existing cps traffic profiles. + Add missing traffic profiles. + UDP: + Single burst of 32 packets was confirmed as safe enough for TRex. + Maybe 64 could work, but not enough testing for that. + Multiple bursts have lead to reduced TRex performance, as overlaping bursts (from different client instances) tend to fill up the buffers. + TCP: + Data size set to 11111 bytes, completely arbitrarily. + Results look reasonable, so I have kept that. - MSS not set at all - No tested support for frame size other than 64B. - Frame size does not even factor into TCP profiles. + So other frame sizes are skipped in autogen. + Update tags in related suites. - HOSTS_{n} and SRC_USER_{n} should be unified. - Questionable clarification on difference between IP4BASE and SCALE. + Add NAT state resetters to tests that need them. + Resetter is called (if set) before each measurement. + If ramp-up is detected, resetter is not set. + Rename "mult" argument to "multiplier". + Abstracted from packets to transactions. + Transaction corresponds to profile. + TRex multiplier argument sets target rate in transactions per second. + The familiar STL traffic: + Bidirectional is considered to be 2 packets per transaction. + Unidirectional is considered to be 1 packet per transaction. + The newer ASTF traffic: + 4 subtypes, each has different number of packets per transaction. + For max rate computation: + Packets in the more numerous direction are considered. + Rely on TRex reported traffic duration for ASTF: + Use the server side value. - Client side value is higher by an overhead. - TRex is not sending traffic during that time. + Remove delays from traffic profiles. - Those delays would increase the reprted traffic time. + Support for scale lmited trials. + Only for ASTF profiles, each ASTF profile has limited scale. + Scale defined in suite variables. + For TRex to send all transactions provided duration value is ignored. + The appropriate value is computed in TrafficGenerator. + An ad-hoc time constant is added to match the TRex client side time overhead. + The profile driver receives the computed duration. + Measurement for PLRsearch add a sleep if the computed duration is smaller. + Alternative argument for search algos if scale is limited. + Both need higher timeout to accomodate big scales. + MLRsearch can afford fewer phases. + Added a parameter to optionally shorten the duration. + Use short duration for runtime stats trial and failure stats trial. + Use very large keepalive values in udp profiles to avoid ka packets. + No polling in ASTF profile driver. - Polling could eliminate the time overhead value. + But polling proved to introduce some loss, affecting the results. + Handle duration stretching in ASTF by stopping traffic. + The stop has several steps so that: + The traffic is really stopped entirely. + Late packets do not count (maybe as errors). + Stats are preserved to read for results (and cleared afterwards). + Several quantities added to ReceiveRateMeasurement: + Original target duration is preserved (algos need that). + Input estimate (tps) for early search iterations. + Output estimate (maybe pps) for MRR output. + Strict result (unsent counts as loss) for NDR. + Use L2 counters (opackets, ipackets) where possible. - TRex has trouble processing packets for the L7 ones at high loads. + Remove warmup from profile drivers and keywords. + Suites should call "Send ramp-up traffic" explicitly if needed. + Added parsing for few more counters. + Both to use in formulas or just for debug purposes. - Only 64B cases in autogen, framesize support to be added later. + Latency streams during search can be enabled via PERF_USE_LATENCY env var. + MLRsearch improvments: + Rename argument names to min_rate and max_rate. + Use relative receive rate in initial phase. + PLRsearch improvements: + Careful computation when output (pps) does not match input (tps). + Use geometric distribution (instead of Poisson). + Helps agains math errors. + This should improve estimate stability. - But in practice big losses still lead to significant jumps. + Traffic generator improvements: + send_traffic_on_tg now calls the full set_rate_provider_defaults. + _send_traffic_on_tg_internal for the logic without provider defaults. + As the internal function is re-used by measure() without affecting defaults. + Move _parse_traffic_results just before get_measurement_result. + As the latter uses fields set bu the former, it is now easier to read. + Multiple sources for approximate duration. + Tried from more precise to more available. + Includes logic for _pps tests (added in later change). + Move explicit type conversions to earlier occurences. + Profile driver output field uses semicolons to simplify parsing. + Performance Robot lib file split to several smaller ones. + performance_actions.robot: + Hosts Additional Statistics Action For * keywords. + performance_display.robot: + Hosts keyword for displaying and verifying results. + Change test message to use the correct unit (pps or cps). + performance_limits.robot renamed to performance_vars.robot + Added many keywords, mostly for accessing test variables. + Moved variables for Policer into a new keyword there. + Some keywords need sophisticated logic. - Other are basically Get Variable Value. + But in future more logic can be added, without editing callers. + Documentation for the new keywords acts as a documentation for test variables. + performance_utils.robot has the rest. + Eliminated arguments if the value is in test variable. + Small improvements to documentation. - Still not enough cleanup with respect to arguments and test variables. + Keywords are sorted alphabetically now in each one. + Suites: + Unified variables table: + No colons in comments. + ${n_hosts}, ${n_ports} and use them instead hardcoded numbers. + Add -cps to existing cps suite names. + Remove "trial data overwrite". + Compute max rate as in STL suites. + Each NAT suite has ip4base suite to compare results to. - Those act as indirect TRex calibration. - VPP does not lose packets in those. + Latency in ASTF suites is disabled hard. - As we do not support latency in ASTF profiles yet. + Unidirectional tests governed by suite variable, not an argument. + Write long argument lists vertically. + Prefer to use argument names. + In Python, also the last argument is followed by comma. + It makes renaming and reordering easier. + Similarly applies to prints with long lists of values. + A TODO to update api crc file comments. Change-Id: I84729355edbec051298a9de1162107f88ff5737d Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2020-10-23CSIT-1597 NAT44 API: dynamic configJan Gelety1-5/+0
- cover API changes in VPP: https://gerrit.fd.io/r/c/vpp/+/29463 - update vpp stable to version 21.01-rc0~283-g5f4f2081c Change-Id: I079c10e4537448c3b078f22c3fe4ed266a5e2e2c Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-09-12Test: Add ramp-up phase to nat44ed-udir testsJan Gelety1-2/+7
Change-Id: I3aa50ec1ef9b0445014daa31e767323060f4a03f Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-09-30test: compute max_translations_per_thread based on worker threads numberJan Gelety1-1/+6
Change-Id: I1c638aef886bf37a9feb4a29e4949c7c8f19b717 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-09-21Tests: nat44ed-unipmikus1-0/+165
Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: Iee488e2244a4e253471310bc7fb9640c69c6b0cb